Eliminate some uses of T2
[qemu/malc.git] / hw / palm.c
blob9400ea78c61cf7719b66fae0e55e235e7523d1ca
1 /*
2 * PalmOne's (TM) PDAs.
4 * Copyright (C) 2006-2007 Andrzej Zaborowski <balrog@zabor.org>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation; either version 2 of
9 * the License, or (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
19 * MA 02111-1307 USA
21 #include "hw.h"
22 #include "audio/audio.h"
23 #include "sysemu.h"
24 #include "console.h"
25 #include "omap.h"
26 #include "boards.h"
27 #include "arm-misc.h"
29 static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
31 uint32_t *val = (uint32_t *) opaque;
32 return *val >> ((offset & 3) << 3);
35 static uint32_t static_readh(void *opaque, target_phys_addr_t offset) {
36 uint32_t *val = (uint32_t *) opaque;
37 return *val >> ((offset & 1) << 3);
40 static uint32_t static_readw(void *opaque, target_phys_addr_t offset) {
41 uint32_t *val = (uint32_t *) opaque;
42 return *val >> ((offset & 0) << 3);
45 static void static_write(void *opaque, target_phys_addr_t offset,
46 uint32_t value)
48 #ifdef SPY
49 printf("%s: value %08lx written at " PA_FMT "\n",
50 __FUNCTION__, value, offset);
51 #endif
54 static CPUReadMemoryFunc *static_readfn[] = {
55 static_readb,
56 static_readh,
57 static_readw,
60 static CPUWriteMemoryFunc *static_writefn[] = {
61 static_write,
62 static_write,
63 static_write,
66 /* Palm Tunsgten|E support */
68 /* Shared GPIOs */
69 #define PALMTE_USBDETECT_GPIO 0
70 #define PALMTE_USB_OR_DC_GPIO 1
71 #define PALMTE_TSC_GPIO 4
72 #define PALMTE_PINTDAV_GPIO 6
73 #define PALMTE_MMC_WP_GPIO 8
74 #define PALMTE_MMC_POWER_GPIO 9
75 #define PALMTE_HDQ_GPIO 11
76 #define PALMTE_HEADPHONES_GPIO 14
77 #define PALMTE_SPEAKER_GPIO 15
78 /* MPU private GPIOs */
79 #define PALMTE_DC_GPIO 2
80 #define PALMTE_MMC_SWITCH_GPIO 4
81 #define PALMTE_MMC1_GPIO 6
82 #define PALMTE_MMC2_GPIO 7
83 #define PALMTE_MMC3_GPIO 11
85 static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
87 struct uwire_slave_s *tsc;
88 AudioState *audio = 0;
90 #ifdef HAS_AUDIO
91 audio = AUD_init();
92 #endif
94 tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO],
95 audio);
97 omap_uwire_attach(cpu->microwire, tsc, 0);
98 omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
101 static struct {
102 int row;
103 int column;
104 } palmte_keymap[0x80] = {
105 [0 ... 0x7f] = { -1, -1 },
106 [0x3b] = { 0, 0 }, /* F1 -> Calendar */
107 [0x3c] = { 1, 0 }, /* F2 -> Contacts */
108 [0x3d] = { 2, 0 }, /* F3 -> Tasks List */
109 [0x3e] = { 3, 0 }, /* F4 -> Note Pad */
110 [0x01] = { 4, 0 }, /* Esc -> Power */
111 [0x4b] = { 0, 1 }, /* Left */
112 [0x50] = { 1, 1 }, /* Down */
113 [0x48] = { 2, 1 }, /* Up */
114 [0x4d] = { 3, 1 }, /* Right */
115 [0x4c] = { 4, 1 }, /* Centre */
116 [0x39] = { 4, 1 }, /* Spc -> Centre */
119 static void palmte_button_event(void *opaque, int keycode)
121 struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;
123 if (palmte_keymap[keycode & 0x7f].row != -1)
124 omap_mpuio_key(cpu->mpuio,
125 palmte_keymap[keycode & 0x7f].row,
126 palmte_keymap[keycode & 0x7f].column,
127 !(keycode & 0x80));
130 static void palmte_onoff_gpios(void *opaque, int line, int level)
132 switch (line) {
133 case 0:
134 printf("%s: current to MMC/SD card %sabled.\n",
135 __FUNCTION__, level ? "dis" : "en");
136 break;
137 case 1:
138 printf("%s: internal speaker amplifier %s.\n",
139 __FUNCTION__, level ? "down" : "on");
140 break;
142 /* These LCD & Audio output signals have not been identified yet. */
143 case 2:
144 case 3:
145 case 4:
146 printf("%s: LCD GPIO%i %s.\n",
147 __FUNCTION__, line - 1, level ? "high" : "low");
148 break;
149 case 5:
150 case 6:
151 printf("%s: Audio GPIO%i %s.\n",
152 __FUNCTION__, line - 4, level ? "high" : "low");
153 break;
157 static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
159 qemu_irq *misc_gpio;
161 omap_mmc_handlers(cpu->mmc,
162 omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
163 qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
164 [PALMTE_MMC_SWITCH_GPIO]));
166 misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
167 omap_gpio_out_set(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
168 omap_gpio_out_set(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
169 omap_gpio_out_set(cpu->gpio, 11, misc_gpio[2]);
170 omap_gpio_out_set(cpu->gpio, 12, misc_gpio[3]);
171 omap_gpio_out_set(cpu->gpio, 13, misc_gpio[4]);
172 omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
173 omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
175 /* Reset some inputs to initial state. */
176 qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USBDETECT_GPIO]);
177 qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USB_OR_DC_GPIO]);
178 qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[4]);
179 qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_HEADPHONES_GPIO]);
180 qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
181 qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
182 qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
183 qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
186 static void palmte_init(int ram_size, int vga_ram_size,
187 const char *boot_device, DisplayState *ds,
188 const char *kernel_filename, const char *kernel_cmdline,
189 const char *initrd_filename, const char *cpu_model)
191 struct omap_mpu_state_s *cpu;
192 int flash_size = 0x00800000;
193 int sdram_size = 0x02000000;
194 int io;
195 static uint32_t cs0val = 0xffffffff;
196 static uint32_t cs1val = 0x0000e1a0;
197 static uint32_t cs2val = 0x0000e1a0;
198 static uint32_t cs3val = 0xe1a0e1a0;
199 ram_addr_t phys_flash;
200 int rom_size, rom_loaded = 0;
202 if (ram_size < flash_size + sdram_size + OMAP15XX_SRAM_SIZE) {
203 fprintf(stderr, "This architecture uses %i bytes of memory\n",
204 flash_size + sdram_size + OMAP15XX_SRAM_SIZE);
205 exit(1);
208 cpu = omap310_mpu_init(sdram_size, ds, cpu_model);
210 /* External Flash (EMIFS) */
211 cpu_register_physical_memory(OMAP_CS0_BASE, flash_size,
212 (phys_flash = qemu_ram_alloc(flash_size)) | IO_MEM_ROM);
214 io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs0val);
215 cpu_register_physical_memory(OMAP_CS0_BASE + flash_size,
216 OMAP_CS0_SIZE - flash_size, io);
217 io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs1val);
218 cpu_register_physical_memory(OMAP_CS1_BASE, OMAP_CS1_SIZE, io);
219 io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs2val);
220 cpu_register_physical_memory(OMAP_CS2_BASE, OMAP_CS2_SIZE, io);
221 io = cpu_register_io_memory(0, static_readfn, static_writefn, &cs3val);
222 cpu_register_physical_memory(OMAP_CS3_BASE, OMAP_CS3_SIZE, io);
224 palmte_microwire_setup(cpu);
226 qemu_add_kbd_event_handler(palmte_button_event, cpu);
228 palmte_gpio_setup(cpu);
230 /* Setup initial (reset) machine state */
231 if (nb_option_roms) {
232 rom_size = get_image_size(option_rom[0]);
233 if (rom_size > flash_size)
234 fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
235 __FUNCTION__, rom_size, flash_size);
236 else if (rom_size > 0 && load_image(option_rom[0],
237 phys_ram_base + phys_flash) > 0) {
238 rom_loaded = 1;
239 cpu->env->regs[15] = 0x00000000;
240 } else
241 fprintf(stderr, "%s: error loading '%s'\n",
242 __FUNCTION__, option_rom[0]);
245 if (!rom_loaded && !kernel_filename) {
246 fprintf(stderr, "Kernel or ROM image must be specified\n");
247 exit(1);
250 /* Load the kernel. */
251 if (kernel_filename) {
252 /* Start at bootloader. */
253 cpu->env->regs[15] = OMAP_EMIFF_BASE;
255 arm_load_kernel(cpu->env, sdram_size, kernel_filename, kernel_cmdline,
256 initrd_filename, 0x331, OMAP_EMIFF_BASE);
259 dpy_resize(ds, 320, 320);
262 QEMUMachine palmte_machine = {
263 "cheetah",
264 "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
265 palmte_init,