hw/intc/arm_gic_common.c

   1 /*
   2  * ARM GIC support - common bits of emulated and KVM kernel model
   3  *
   4  * Copyright (c) 2012 Linaro Limited
   5  * Written by Peter Maydell
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation, either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "qemu/osdep.h"
  22 #include "qapi/error.h"
  23 #include "gic_internal.h"
  24 #include "hw/arm/linux-boot-if.h"
  25
  26 static void gic_pre_save(void *opaque)
  27 {
  28     GICState *s = (GICState *)opaque;
  29     ARMGICCommonClass *c = ARM_GIC_COMMON_GET_CLASS(s);
  30
  31     if (c->pre_save) {
  32         c->pre_save(s);
  33     }
  34 }
  35
  36 static int gic_post_load(void *opaque, int version_id)
  37 {
  38     GICState *s = (GICState *)opaque;
  39     ARMGICCommonClass *c = ARM_GIC_COMMON_GET_CLASS(s);
  40
  41     if (c->post_load) {
  42         c->post_load(s);
  43     }
  44     return 0;
  45 }
  46
  47 static const VMStateDescription vmstate_gic_irq_state = {
  48     .name = "arm_gic_irq_state",
  49     .version_id = 1,
  50     .minimum_version_id = 1,
  51     .fields = (VMStateField[]) {
  52         VMSTATE_UINT8(enabled, gic_irq_state),
  53         VMSTATE_UINT8(pending, gic_irq_state),
  54         VMSTATE_UINT8(active, gic_irq_state),
  55         VMSTATE_UINT8(level, gic_irq_state),
  56         VMSTATE_BOOL(model, gic_irq_state),
  57         VMSTATE_BOOL(edge_trigger, gic_irq_state),
  58         VMSTATE_UINT8(group, gic_irq_state),
  59         VMSTATE_END_OF_LIST()
  60     }
  61 };
  62
  63 static const VMStateDescription vmstate_gic = {
  64     .name = "arm_gic",
  65     .version_id = 12,
  66     .minimum_version_id = 12,
  67     .pre_save = gic_pre_save,
  68     .post_load = gic_post_load,
  69     .fields = (VMStateField[]) {
  70         VMSTATE_UINT32(ctlr, GICState),
  71         VMSTATE_UINT32_ARRAY(cpu_ctlr, GICState, GIC_NCPU),
  72         VMSTATE_STRUCT_ARRAY(irq_state, GICState, GIC_MAXIRQ, 1,
  73                              vmstate_gic_irq_state, gic_irq_state),
  74         VMSTATE_UINT8_ARRAY(irq_target, GICState, GIC_MAXIRQ),
  75         VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU),
  76         VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL),
  77         VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU),
  78         VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU),
  79         VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU),
  80         VMSTATE_UINT16_ARRAY(current_pending, GICState, GIC_NCPU),
  81         VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU),
  82         VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU),
  83         VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU),
  84         VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU),
  85         VMSTATE_END_OF_LIST()
  86     }
  87 };
  88
  89 void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler,
  90                             const MemoryRegionOps *ops)
  91 {
  92     SysBusDevice *sbd = SYS_BUS_DEVICE(s);
  93     int i = s->num_irq - GIC_INTERNAL;
  94
  95     /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
  96      * GPIO array layout is thus:
  97      *  [0..N-1] SPIs
  98      *  [N..N+31] PPIs for CPU 0
  99      *  [N+32..N+63] PPIs for CPU 1
 100      *   ...
 101      */
 102     i += (GIC_INTERNAL * s->num_cpu);
 103     qdev_init_gpio_in(DEVICE(s), handler, i);
 104
 105     for (i = 0; i < s->num_cpu; i++) {
 106         sysbus_init_irq(sbd, &s->parent_irq[i]);
 107     }
 108     for (i = 0; i < s->num_cpu; i++) {
 109         sysbus_init_irq(sbd, &s->parent_fiq[i]);
 110     }
 111     for (i = 0; i < s->num_cpu; i++) {
 112         sysbus_init_irq(sbd, &s->parent_virq[i]);
 113     }
 114     for (i = 0; i < s->num_cpu; i++) {
 115         sysbus_init_irq(sbd, &s->parent_vfiq[i]);
 116     }
 117
 118     /* Distributor */
 119     memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000);
 120     sysbus_init_mmio(sbd, &s->iomem);
 121
 122     /* This is the main CPU interface "for this core". It is always
 123      * present because it is required by both software emulation and KVM.
 124      */
 125     memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL,
 126                           s, "gic_cpu", s->revision == 2 ? 0x2000 : 0x100);
 127     sysbus_init_mmio(sbd, &s->cpuiomem[0]);
 128 }
 129
 130 static void arm_gic_common_realize(DeviceState *dev, Error **errp)
 131 {
 132     GICState *s = ARM_GIC_COMMON(dev);
 133     int num_irq = s->num_irq;
 134
 135     if (s->num_cpu > GIC_NCPU) {
 136         error_setg(errp, "requested %u CPUs exceeds GIC maximum %d",
 137                    s->num_cpu, GIC_NCPU);
 138         return;
 139     }
 140     s->num_irq += GIC_BASE_IRQ;
 141     if (s->num_irq > GIC_MAXIRQ) {
 142         error_setg(errp,
 143                    "requested %u interrupt lines exceeds GIC maximum %d",
 144                    num_irq, GIC_MAXIRQ);
 145         return;
 146     }
 147     /* ITLinesNumber is represented as (N / 32) - 1 (see
 148      * gic_dist_readb) so this is an implementation imposed
 149      * restriction, not an architectural one:
 150      */
 151     if (s->num_irq < 32 || (s->num_irq % 32)) {
 152         error_setg(errp,
 153                    "%d interrupt lines unsupported: not divisible by 32",
 154                    num_irq);
 155         return;
 156     }
 157
 158     if (s->security_extn &&
 159         (s->revision == REV_11MPCORE)) {
 160         error_setg(errp, "this GIC revision does not implement "
 161                    "the security extensions");
 162         return;
 163     }
 164 }
 165
 166 static void arm_gic_common_reset(DeviceState *dev)
 167 {
 168     GICState *s = ARM_GIC_COMMON(dev);
 169     int i, j;
 170     int resetprio;
 171
 172     /* If we're resetting a TZ-aware GIC as if secure firmware
 173      * had set it up ready to start a kernel in non-secure,
 174      * we need to set interrupt priorities to a "zero for the
 175      * NS view" value. This is particularly critical for the
 176      * priority_mask[] values, because if they are zero then NS
 177      * code cannot ever rewrite the priority to anything else.
 178      */
 179     if (s->security_extn && s->irq_reset_nonsecure) {
 180         resetprio = 0x80;
 181     } else {
 182         resetprio = 0;
 183     }
 184
 185     memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
 186     for (i = 0 ; i < s->num_cpu; i++) {
 187         if (s->revision == REV_11MPCORE) {
 188             s->priority_mask[i] = 0xf0;
 189         } else {
 190             s->priority_mask[i] = resetprio;
 191         }
 192         s->current_pending[i] = 1023;
 193         s->running_priority[i] = 0x100;
 194         s->cpu_ctlr[i] = 0;
 195         s->bpr[i] = GIC_MIN_BPR;
 196         s->abpr[i] = GIC_MIN_ABPR;
 197         for (j = 0; j < GIC_INTERNAL; j++) {
 198             s->priority1[j][i] = resetprio;
 199         }
 200         for (j = 0; j < GIC_NR_SGIS; j++) {
 201             s->sgi_pending[j][i] = 0;
 202         }
 203     }
 204     for (i = 0; i < GIC_NR_SGIS; i++) {
 205         GIC_SET_ENABLED(i, ALL_CPU_MASK);
 206         GIC_SET_EDGE_TRIGGER(i);
 207     }
 208
 209     for (i = 0; i < ARRAY_SIZE(s->priority2); i++) {
 210         s->priority2[i] = resetprio;
 211     }
 212
 213     for (i = 0; i < GIC_MAXIRQ; i++) {
 214         /* For uniprocessor GICs all interrupts always target the sole CPU */
 215         if (s->num_cpu == 1) {
 216             s->irq_target[i] = 1;
 217         } else {
 218             s->irq_target[i] = 0;
 219         }
 220     }
 221     if (s->security_extn && s->irq_reset_nonsecure) {
 222         for (i = 0; i < GIC_MAXIRQ; i++) {
 223             GIC_SET_GROUP(i, ALL_CPU_MASK);
 224         }
 225     }
 226
 227     s->ctlr = 0;
 228 }
 229
 230 static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
 231                                       bool secure_boot)
 232 {
 233     GICState *s = ARM_GIC_COMMON(obj);
 234
 235     if (s->security_extn && !secure_boot) {
 236         /* We're directly booting a kernel into NonSecure. If this GIC
 237          * implements the security extensions then we must configure it
 238          * to have all the interrupts be NonSecure (this is a job that
 239          * is done by the Secure boot firmware in real hardware, and in
 240          * this mode QEMU is acting as a minimalist firmware-and-bootloader
 241          * equivalent).
 242          */
 243         s->irq_reset_nonsecure = true;
 244     }
 245 }
 246
 247 static Property arm_gic_common_properties[] = {
 248     DEFINE_PROP_UINT32("num-cpu", GICState, num_cpu, 1),
 249     DEFINE_PROP_UINT32("num-irq", GICState, num_irq, 32),
 250     /* Revision can be 1 or 2 for GIC architecture specification
 251      * versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
 252      */
 253     DEFINE_PROP_UINT32("revision", GICState, revision, 1),
 254     /* True if the GIC should implement the security extensions */
 255     DEFINE_PROP_BOOL("has-security-extensions", GICState, security_extn, 0),
 256     DEFINE_PROP_END_OF_LIST(),
 257 };
 258
 259 static void arm_gic_common_class_init(ObjectClass *klass, void *data)
 260 {
 261     DeviceClass *dc = DEVICE_CLASS(klass);
 262     ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);
 263
 264     dc->reset = arm_gic_common_reset;
 265     dc->realize = arm_gic_common_realize;
 266     dc->props = arm_gic_common_properties;
 267     dc->vmsd = &vmstate_gic;
 268     albifc->arm_linux_init = arm_gic_common_linux_init;
 269 }
 270
 271 static const TypeInfo arm_gic_common_type = {
 272     .name = TYPE_ARM_GIC_COMMON,
 273     .parent = TYPE_SYS_BUS_DEVICE,
 274     .instance_size = sizeof(GICState),
 275     .class_size = sizeof(ARMGICCommonClass),
 276     .class_init = arm_gic_common_class_init,
 277     .abstract = true,
 278     .interfaces = (InterfaceInfo []) {
 279         { TYPE_ARM_LINUX_BOOT_IF },
 280         { },
 281     },
 282 };
 283
 284 static void register_types(void)
 285 {
 286     type_register_static(&arm_gic_common_type);
 287 }
 288
 289 type_init(register_types)