hw/ppc/ppc440_bamboo.c

   1 /*
   2  * QEMU PowerPC 440 Bamboo board emulation
   3  *
   4  * Copyright 2007 IBM Corporation.
   5  * Authors:
   6  *  Jerone Young <jyoung5@us.ibm.com>
   7  *  Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
   8  *  Hollis Blanchard <hollisb@us.ibm.com>
   9  *
  10  * This work is licensed under the GNU GPL license version 2 or later.
  11  *
  12  */
  13
  14 #include "qemu/osdep.h"
  15 #include "qemu/units.h"
  16 #include "qemu/datadir.h"
  17 #include "qemu/error-report.h"
  18 #include "net/net.h"
  19 #include "hw/pci/pci.h"
  20 #include "hw/boards.h"
  21 #include "sysemu/kvm.h"
  22 #include "kvm_ppc.h"
  23 #include "sysemu/device_tree.h"
  24 #include "hw/loader.h"
  25 #include "elf.h"
  26 #include "hw/char/serial.h"
  27 #include "hw/ppc/ppc.h"
  28 #include "ppc405.h"
  29 #include "sysemu/sysemu.h"
  30 #include "sysemu/reset.h"
  31 #include "hw/sysbus.h"
  32 #include "hw/intc/ppc-uic.h"
  33 #include "hw/qdev-properties.h"
  34 #include "qapi/error.h"
  35
  36 #include <libfdt.h>
  37
  38 #define BINARY_DEVICE_TREE_FILE "bamboo.dtb"
  39
  40 /* from u-boot */
  41 #define KERNEL_ADDR  0x1000000
  42 #define FDT_ADDR     0x1800000
  43 #define RAMDISK_ADDR 0x1900000
  44
  45 #define PPC440EP_PCI_CONFIG     0xeec00000
  46 #define PPC440EP_PCI_INTACK     0xeed00000
  47 #define PPC440EP_PCI_SPECIAL    0xeed00000
  48 #define PPC440EP_PCI_REGS       0xef400000
  49 #define PPC440EP_PCI_IO         0xe8000000
  50 #define PPC440EP_PCI_IOLEN      0x00010000
  51
  52 static hwaddr entry;
  53
  54 static int bamboo_load_device_tree(MachineState *machine,
  55                                    hwaddr addr,
  56                                    hwaddr initrd_base,
  57                                    hwaddr initrd_size)
  58 {
  59     int ret = -1;
  60     uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(machine->ram_size) };
  61     char *filename;
  62     int fdt_size;
  63     void *fdt;
  64     uint32_t tb_freq = 400000000;
  65     uint32_t clock_freq = 400000000;
  66
  67     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
  68     if (!filename) {
  69         return -1;
  70     }
  71     fdt = load_device_tree(filename, &fdt_size);
  72     g_free(filename);
  73     if (fdt == NULL) {
  74         return -1;
  75     }
  76
  77     /* Manipulate device tree in memory. */
  78
  79     ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
  80                            sizeof(mem_reg_property));
  81     if (ret < 0) {
  82         fprintf(stderr, "couldn't set /memory/reg\n");
  83     }
  84     ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
  85                                 initrd_base);
  86     if (ret < 0) {
  87         fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");
  88     }
  89     ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
  90                                 (initrd_base + initrd_size));
  91     if (ret < 0) {
  92         fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");
  93     }
  94     ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
  95                                   machine->kernel_cmdline);
  96     if (ret < 0) {
  97         fprintf(stderr, "couldn't set /chosen/bootargs\n");
  98     }
  99
 100     /*
 101      * Copy data from the host device tree into the guest. Since the guest can
 102      * directly access the timebase without host involvement, we must expose
 103      * the correct frequencies.
 104      */
 105     if (kvm_enabled()) {
 106         tb_freq = kvmppc_get_tbfreq();
 107         clock_freq = kvmppc_get_clockfreq();
 108     }
 109
 110     qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency",
 111                           clock_freq);
 112     qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency",
 113                           tb_freq);
 114
 115     rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
 116
 117     /* Set ms->fdt for 'dumpdtb' QMP/HMP command */
 118     machine->fdt = fdt;
 119
 120     return 0;
 121 }
 122
 123 /* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
 124 static void mmubooke_create_initial_mapping(CPUPPCState *env,
 125                                      target_ulong va,
 126                                      hwaddr pa)
 127 {
 128     ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
 129
 130     tlb->attr = 0;
 131     tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
 132     tlb->size = 1U << 31; /* up to 0x80000000  */
 133     tlb->EPN = va & TARGET_PAGE_MASK;
 134     tlb->RPN = pa & TARGET_PAGE_MASK;
 135     tlb->PID = 0;
 136
 137     tlb = &env->tlb.tlbe[1];
 138     tlb->attr = 0;
 139     tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
 140     tlb->size = 1U << 31; /* up to 0xffffffff  */
 141     tlb->EPN = 0x80000000 & TARGET_PAGE_MASK;
 142     tlb->RPN = 0x80000000 & TARGET_PAGE_MASK;
 143     tlb->PID = 0;
 144 }
 145
 146 static void main_cpu_reset(void *opaque)
 147 {
 148     PowerPCCPU *cpu = opaque;
 149     CPUPPCState *env = &cpu->env;
 150
 151     cpu_reset(CPU(cpu));
 152     env->gpr[1] = (16 * MiB) - 8;
 153     env->gpr[3] = FDT_ADDR;
 154     env->nip = entry;
 155
 156     /* Create a mapping for the kernel.  */
 157     mmubooke_create_initial_mapping(env, 0, 0);
 158 }
 159
 160 static void bamboo_init(MachineState *machine)
 161 {
 162     const char *kernel_filename = machine->kernel_filename;
 163     const char *initrd_filename = machine->initrd_filename;
 164     unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
 165     MemoryRegion *address_space_mem = get_system_memory();
 166     MemoryRegion *isa = g_new(MemoryRegion, 1);
 167     PCIBus *pcibus;
 168     PowerPCCPU *cpu;
 169     CPUPPCState *env;
 170     target_long initrd_size = 0;
 171     DeviceState *dev;
 172     DeviceState *uicdev;
 173     SysBusDevice *uicsbd;
 174     int success;
 175     int i;
 176
 177     cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
 178     env = &cpu->env;
 179
 180     if (env->mmu_model != POWERPC_MMU_BOOKE) {
 181         error_report("MMU model %i not supported by this machine",
 182                      env->mmu_model);
 183         exit(1);
 184     }
 185
 186     qemu_register_reset(main_cpu_reset, cpu);
 187     ppc_booke_timers_init(cpu, 400000000, 0);
 188     ppc_dcr_init(env, NULL, NULL);
 189
 190     /* interrupt controller */
 191     uicdev = qdev_new(TYPE_PPC_UIC);
 192     ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(uicdev), cpu, &error_fatal);
 193     object_unref(OBJECT(uicdev));
 194     uicsbd = SYS_BUS_DEVICE(uicdev);
 195     sysbus_connect_irq(uicsbd, PPCUIC_OUTPUT_INT,
 196                        qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_INT));
 197     sysbus_connect_irq(uicsbd, PPCUIC_OUTPUT_CINT,
 198                        qdev_get_gpio_in(DEVICE(cpu), PPC40x_INPUT_CINT));
 199
 200     /* SDRAM controller */
 201     dev = qdev_new(TYPE_PPC4xx_SDRAM_DDR);
 202     object_property_set_link(OBJECT(dev), "dram", OBJECT(machine->ram),
 203                              &error_abort);
 204     ppc4xx_dcr_realize(PPC4xx_DCR_DEVICE(dev), cpu, &error_fatal);
 205     object_unref(OBJECT(dev));
 206     /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
 207     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(uicdev, 14));
 208     /* Enable SDRAM memory regions, this should be done by the firmware */
 209     ppc4xx_sdram_ddr_enable(PPC4xx_SDRAM_DDR(dev));
 210
 211     /* PCI */
 212     dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE,
 213                                 PPC440EP_PCI_CONFIG,
 214                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[0]),
 215                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[1]),
 216                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[2]),
 217                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[3]),
 218                                 NULL);
 219     pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
 220     if (!pcibus) {
 221         error_report("couldn't create PCI controller");
 222         exit(1);
 223     }
 224
 225     memory_region_init_alias(isa, NULL, "isa_mmio",
 226                              get_system_io(), 0, PPC440EP_PCI_IOLEN);
 227     memory_region_add_subregion(get_system_memory(), PPC440EP_PCI_IO, isa);
 228
 229     if (serial_hd(0) != NULL) {
 230         serial_mm_init(address_space_mem, 0xef600300, 0,
 231                        qdev_get_gpio_in(uicdev, 0),
 232                        PPC_SERIAL_MM_BAUDBASE, serial_hd(0),
 233                        DEVICE_BIG_ENDIAN);
 234     }
 235     if (serial_hd(1) != NULL) {
 236         serial_mm_init(address_space_mem, 0xef600400, 0,
 237                        qdev_get_gpio_in(uicdev, 1),
 238                        PPC_SERIAL_MM_BAUDBASE, serial_hd(1),
 239                        DEVICE_BIG_ENDIAN);
 240     }
 241
 242     if (pcibus) {
 243         /* Register network interfaces. */
 244         for (i = 0; i < nb_nics; i++) {
 245             /*
 246              * There are no PCI NICs on the Bamboo board, but there are
 247              * PCI slots, so we can pick whatever default model we want.
 248              */
 249             pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL);
 250         }
 251     }
 252
 253     /* Load kernel. */
 254     if (kernel_filename) {
 255         hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID;
 256         success = load_uimage(kernel_filename, &entry, &loadaddr, NULL,
 257                               NULL, NULL);
 258         if (success < 0) {
 259             uint64_t elf_entry;
 260             success = load_elf(kernel_filename, NULL, NULL, NULL, &elf_entry,
 261                                NULL, NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
 262             entry = elf_entry;
 263         }
 264         /* XXX try again as binary */
 265         if (success < 0) {
 266             error_report("could not load kernel '%s'", kernel_filename);
 267             exit(1);
 268         }
 269     }
 270
 271     /* Load initrd. */
 272     if (initrd_filename) {
 273         initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
 274                                           machine->ram_size - RAMDISK_ADDR);
 275
 276         if (initrd_size < 0) {
 277             error_report("could not load ram disk '%s' at %x",
 278                          initrd_filename, RAMDISK_ADDR);
 279             exit(1);
 280         }
 281     }
 282
 283     /* If we're loading a kernel directly, we must load the device tree too. */
 284     if (kernel_filename) {
 285         if (bamboo_load_device_tree(machine, FDT_ADDR,
 286                                     RAMDISK_ADDR, initrd_size) < 0) {
 287             error_report("couldn't load device tree");
 288             exit(1);
 289         }
 290     }
 291 }
 292
 293 static void bamboo_machine_init(MachineClass *mc)
 294 {
 295     mc->desc = "bamboo";
 296     mc->init = bamboo_init;
 297     mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("440epb");
 298     mc->default_ram_id = "ppc4xx.sdram";
 299 }
 300
 301 DEFINE_MACHINE("bamboo", bamboo_machine_init)