?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
virtio: don't enable notifications during polling
[qemu/kevin.git] / hw / usb / hcd-musb.c
blobc29fbef6fc508e86a0ad16f42b3d7621789ab94e
1 /*
2 * "Inventra" High-speed Dual-Role Controller (MUSB-HDRC), Mentor Graphics,
3 * USB2.0 OTG compliant core used in various chips.
4 *
5 * Copyright (C) 2008 Nokia Corporation
6 * Written by Andrzej Zaborowski <andrew@openedhand.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 or
11 * (at your option) version 3 of the License.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License along
19 * with this program; if not, see <http://www.gnu.org/licenses/>.
20 *
21 * Only host-mode and non-DMA accesses are currently supported.
22 */
23 #include "qemu/osdep.h"
24 #include "qemu/timer.h"
25 #include "hw/usb.h"
26 #include "hw/irq.h"
27 #include "hw/hw.h"
28
29 /* Common USB registers */
30 #define MUSB_HDRC_FADDR 0x00 /* 8-bit */
31 #define MUSB_HDRC_POWER 0x01 /* 8-bit */
32
33 #define MUSB_HDRC_INTRTX 0x02 /* 16-bit */
34 #define MUSB_HDRC_INTRRX 0x04
35 #define MUSB_HDRC_INTRTXE 0x06
36 #define MUSB_HDRC_INTRRXE 0x08
37 #define MUSB_HDRC_INTRUSB 0x0a /* 8 bit */
38 #define MUSB_HDRC_INTRUSBE 0x0b /* 8 bit */
39 #define MUSB_HDRC_FRAME 0x0c /* 16-bit */
40 #define MUSB_HDRC_INDEX 0x0e /* 8 bit */
41 #define MUSB_HDRC_TESTMODE 0x0f /* 8 bit */
42
43 /* Per-EP registers in indexed mode */
44 #define MUSB_HDRC_EP_IDX 0x10 /* 8-bit */
45
46 /* EP FIFOs */
47 #define MUSB_HDRC_FIFO 0x20
48
49 /* Additional Control Registers */
50 #define MUSB_HDRC_DEVCTL 0x60 /* 8 bit */
51
52 /* These are indexed */
53 #define MUSB_HDRC_TXFIFOSZ 0x62 /* 8 bit (see masks) */
54 #define MUSB_HDRC_RXFIFOSZ 0x63 /* 8 bit (see masks) */
55 #define MUSB_HDRC_TXFIFOADDR 0x64 /* 16 bit offset shifted right 3 */
56 #define MUSB_HDRC_RXFIFOADDR 0x66 /* 16 bit offset shifted right 3 */
57
58 /* Some more registers */
59 #define MUSB_HDRC_VCTRL 0x68 /* 8 bit */
60 #define MUSB_HDRC_HWVERS 0x6c /* 8 bit */
61
62 /* Added in HDRC 1.9(?) & MHDRC 1.4 */
63 /* ULPI pass-through */
64 #define MUSB_HDRC_ULPI_VBUSCTL 0x70
65 #define MUSB_HDRC_ULPI_REGDATA 0x74
66 #define MUSB_HDRC_ULPI_REGADDR 0x75
67 #define MUSB_HDRC_ULPI_REGCTL 0x76
68
69 /* Extended config & PHY control */
70 #define MUSB_HDRC_ENDCOUNT 0x78 /* 8 bit */
71 #define MUSB_HDRC_DMARAMCFG 0x79 /* 8 bit */
72 #define MUSB_HDRC_PHYWAIT 0x7a /* 8 bit */
73 #define MUSB_HDRC_PHYVPLEN 0x7b /* 8 bit */
74 #define MUSB_HDRC_HS_EOF1 0x7c /* 8 bit, units of 546.1 us */
75 #define MUSB_HDRC_FS_EOF1 0x7d /* 8 bit, units of 533.3 ns */
76 #define MUSB_HDRC_LS_EOF1 0x7e /* 8 bit, units of 1.067 us */
77
78 /* Per-EP BUSCTL registers */
79 #define MUSB_HDRC_BUSCTL 0x80
80
81 /* Per-EP registers in flat mode */
82 #define MUSB_HDRC_EP 0x100
83
84 /* offsets to registers in flat model */
85 #define MUSB_HDRC_TXMAXP 0x00 /* 16 bit apparently */
86 #define MUSB_HDRC_TXCSR 0x02 /* 16 bit apparently */
87 #define MUSB_HDRC_CSR0 MUSB_HDRC_TXCSR /* re-used for EP0 */
88 #define MUSB_HDRC_RXMAXP 0x04 /* 16 bit apparently */
89 #define MUSB_HDRC_RXCSR 0x06 /* 16 bit apparently */
90 #define MUSB_HDRC_RXCOUNT 0x08 /* 16 bit apparently */
91 #define MUSB_HDRC_COUNT0 MUSB_HDRC_RXCOUNT /* re-used for EP0 */
92 #define MUSB_HDRC_TXTYPE 0x0a /* 8 bit apparently */
93 #define MUSB_HDRC_TYPE0 MUSB_HDRC_TXTYPE /* re-used for EP0 */
94 #define MUSB_HDRC_TXINTERVAL 0x0b /* 8 bit apparently */
95 #define MUSB_HDRC_NAKLIMIT0 MUSB_HDRC_TXINTERVAL /* re-used for EP0 */
96 #define MUSB_HDRC_RXTYPE 0x0c /* 8 bit apparently */
97 #define MUSB_HDRC_RXINTERVAL 0x0d /* 8 bit apparently */
98 #define MUSB_HDRC_FIFOSIZE 0x0f /* 8 bit apparently */
99 #define MUSB_HDRC_CONFIGDATA MGC_O_HDRC_FIFOSIZE /* re-used for EP0 */
100
101 /* "Bus control" registers */
102 #define MUSB_HDRC_TXFUNCADDR 0x00
103 #define MUSB_HDRC_TXHUBADDR 0x02
104 #define MUSB_HDRC_TXHUBPORT 0x03
105
106 #define MUSB_HDRC_RXFUNCADDR 0x04
107 #define MUSB_HDRC_RXHUBADDR 0x06
108 #define MUSB_HDRC_RXHUBPORT 0x07
109
110 /*
111 * MUSBHDRC Register bit masks
112 */
113
114 /* POWER */
115 #define MGC_M_POWER_ISOUPDATE 0x80
116 #define MGC_M_POWER_SOFTCONN 0x40
117 #define MGC_M_POWER_HSENAB 0x20
118 #define MGC_M_POWER_HSMODE 0x10
119 #define MGC_M_POWER_RESET 0x08
120 #define MGC_M_POWER_RESUME 0x04
121 #define MGC_M_POWER_SUSPENDM 0x02
122 #define MGC_M_POWER_ENSUSPEND 0x01
123
124 /* INTRUSB */
125 #define MGC_M_INTR_SUSPEND 0x01
126 #define MGC_M_INTR_RESUME 0x02
127 #define MGC_M_INTR_RESET 0x04
128 #define MGC_M_INTR_BABBLE 0x04
129 #define MGC_M_INTR_SOF 0x08
130 #define MGC_M_INTR_CONNECT 0x10
131 #define MGC_M_INTR_DISCONNECT 0x20
132 #define MGC_M_INTR_SESSREQ 0x40
133 #define MGC_M_INTR_VBUSERROR 0x80 /* FOR SESSION END */
134 #define MGC_M_INTR_EP0 0x01 /* FOR EP0 INTERRUPT */
135
136 /* DEVCTL */
137 #define MGC_M_DEVCTL_BDEVICE 0x80
138 #define MGC_M_DEVCTL_FSDEV 0x40
139 #define MGC_M_DEVCTL_LSDEV 0x20
140 #define MGC_M_DEVCTL_VBUS 0x18
141 #define MGC_S_DEVCTL_VBUS 3
142 #define MGC_M_DEVCTL_HM 0x04
143 #define MGC_M_DEVCTL_HR 0x02
144 #define MGC_M_DEVCTL_SESSION 0x01
145
146 /* TESTMODE */
147 #define MGC_M_TEST_FORCE_HOST 0x80
148 #define MGC_M_TEST_FIFO_ACCESS 0x40
149 #define MGC_M_TEST_FORCE_FS 0x20
150 #define MGC_M_TEST_FORCE_HS 0x10
151 #define MGC_M_TEST_PACKET 0x08
152 #define MGC_M_TEST_K 0x04
153 #define MGC_M_TEST_J 0x02
154 #define MGC_M_TEST_SE0_NAK 0x01
155
156 /* CSR0 */
157 #define MGC_M_CSR0_FLUSHFIFO 0x0100
158 #define MGC_M_CSR0_TXPKTRDY 0x0002
159 #define MGC_M_CSR0_RXPKTRDY 0x0001
160
161 /* CSR0 in Peripheral mode */
162 #define MGC_M_CSR0_P_SVDSETUPEND 0x0080
163 #define MGC_M_CSR0_P_SVDRXPKTRDY 0x0040
164 #define MGC_M_CSR0_P_SENDSTALL 0x0020
165 #define MGC_M_CSR0_P_SETUPEND 0x0010
166 #define MGC_M_CSR0_P_DATAEND 0x0008
167 #define MGC_M_CSR0_P_SENTSTALL 0x0004
168
169 /* CSR0 in Host mode */
170 #define MGC_M_CSR0_H_NO_PING 0x0800
171 #define MGC_M_CSR0_H_WR_DATATOGGLE 0x0400 /* set to allow setting: */
172 #define MGC_M_CSR0_H_DATATOGGLE 0x0200 /* data toggle control */
173 #define MGC_M_CSR0_H_NAKTIMEOUT 0x0080
174 #define MGC_M_CSR0_H_STATUSPKT 0x0040
175 #define MGC_M_CSR0_H_REQPKT 0x0020
176 #define MGC_M_CSR0_H_ERROR 0x0010
177 #define MGC_M_CSR0_H_SETUPPKT 0x0008
178 #define MGC_M_CSR0_H_RXSTALL 0x0004
179
180 /* CONFIGDATA */
181 #define MGC_M_CONFIGDATA_MPRXE 0x80 /* auto bulk pkt combining */
182 #define MGC_M_CONFIGDATA_MPTXE 0x40 /* auto bulk pkt splitting */
183 #define MGC_M_CONFIGDATA_BIGENDIAN 0x20
184 #define MGC_M_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
185 #define MGC_M_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
186 #define MGC_M_CONFIGDATA_DYNFIFO 0x04 /* dynamic FIFO sizing */
187 #define MGC_M_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
188 #define MGC_M_CONFIGDATA_UTMIDW 0x01 /* Width, 0 => 8b, 1 => 16b */
189
190 /* TXCSR in Peripheral and Host mode */
191 #define MGC_M_TXCSR_AUTOSET 0x8000
192 #define MGC_M_TXCSR_ISO 0x4000
193 #define MGC_M_TXCSR_MODE 0x2000
194 #define MGC_M_TXCSR_DMAENAB 0x1000
195 #define MGC_M_TXCSR_FRCDATATOG 0x0800
196 #define MGC_M_TXCSR_DMAMODE 0x0400
197 #define MGC_M_TXCSR_CLRDATATOG 0x0040
198 #define MGC_M_TXCSR_FLUSHFIFO 0x0008
199 #define MGC_M_TXCSR_FIFONOTEMPTY 0x0002
200 #define MGC_M_TXCSR_TXPKTRDY 0x0001
201
202 /* TXCSR in Peripheral mode */
203 #define MGC_M_TXCSR_P_INCOMPTX 0x0080
204 #define MGC_M_TXCSR_P_SENTSTALL 0x0020
205 #define MGC_M_TXCSR_P_SENDSTALL 0x0010
206 #define MGC_M_TXCSR_P_UNDERRUN 0x0004
207
208 /* TXCSR in Host mode */
209 #define MGC_M_TXCSR_H_WR_DATATOGGLE 0x0200
210 #define MGC_M_TXCSR_H_DATATOGGLE 0x0100
211 #define MGC_M_TXCSR_H_NAKTIMEOUT 0x0080
212 #define MGC_M_TXCSR_H_RXSTALL 0x0020
213 #define MGC_M_TXCSR_H_ERROR 0x0004
214
215 /* RXCSR in Peripheral and Host mode */
216 #define MGC_M_RXCSR_AUTOCLEAR 0x8000
217 #define MGC_M_RXCSR_DMAENAB 0x2000
218 #define MGC_M_RXCSR_DISNYET 0x1000
219 #define MGC_M_RXCSR_DMAMODE 0x0800
220 #define MGC_M_RXCSR_INCOMPRX 0x0100
221 #define MGC_M_RXCSR_CLRDATATOG 0x0080
222 #define MGC_M_RXCSR_FLUSHFIFO 0x0010
223 #define MGC_M_RXCSR_DATAERROR 0x0008
224 #define MGC_M_RXCSR_FIFOFULL 0x0002
225 #define MGC_M_RXCSR_RXPKTRDY 0x0001
226
227 /* RXCSR in Peripheral mode */
228 #define MGC_M_RXCSR_P_ISO 0x4000
229 #define MGC_M_RXCSR_P_SENTSTALL 0x0040
230 #define MGC_M_RXCSR_P_SENDSTALL 0x0020
231 #define MGC_M_RXCSR_P_OVERRUN 0x0004
232
233 /* RXCSR in Host mode */
234 #define MGC_M_RXCSR_H_AUTOREQ 0x4000
235 #define MGC_M_RXCSR_H_WR_DATATOGGLE 0x0400
236 #define MGC_M_RXCSR_H_DATATOGGLE 0x0200
237 #define MGC_M_RXCSR_H_RXSTALL 0x0040
238 #define MGC_M_RXCSR_H_REQPKT 0x0020
239 #define MGC_M_RXCSR_H_ERROR 0x0004
240
241 /* HUBADDR */
242 #define MGC_M_HUBADDR_MULTI_TT 0x80
243
244 /* ULPI: Added in HDRC 1.9(?) & MHDRC 1.4 */
245 #define MGC_M_ULPI_VBCTL_USEEXTVBUSIND 0x02
246 #define MGC_M_ULPI_VBCTL_USEEXTVBUS 0x01
247 #define MGC_M_ULPI_REGCTL_INT_ENABLE 0x08
248 #define MGC_M_ULPI_REGCTL_READNOTWRITE 0x04
249 #define MGC_M_ULPI_REGCTL_COMPLETE 0x02
250 #define MGC_M_ULPI_REGCTL_REG 0x01
251
252 /* #define MUSB_DEBUG */
253
254 #ifdef MUSB_DEBUG
255 #define TRACE(fmt, ...) fprintf(stderr, "%s@%d: " fmt "\n", __func__, \
256 __LINE__, ##__VA_ARGS__)
257 #else
258 #define TRACE(...)
259 #endif
260
261
262 static void musb_attach(USBPort *port);
263 static void musb_detach(USBPort *port);
264 static void musb_child_detach(USBPort *port, USBDevice *child);
265 static void musb_schedule_cb(USBPort *port, USBPacket *p);
266 static void musb_async_cancel_device(MUSBState *s, USBDevice *dev);
267
268 static USBPortOps musb_port_ops = {
269 .attach = musb_attach,
270 .detach = musb_detach,
271 .child_detach = musb_child_detach,
272 .complete = musb_schedule_cb,
273 };
274
275 static USBBusOps musb_bus_ops = {
276 };
277
278 typedef struct MUSBPacket MUSBPacket;
279 typedef struct MUSBEndPoint MUSBEndPoint;
280
281 struct MUSBPacket {
282 USBPacket p;
283 MUSBEndPoint *ep;
284 int dir;
285 };
286
287 struct MUSBEndPoint {
288 uint16_t faddr[2];
289 uint8_t haddr[2];
290 uint8_t hport[2];
291 uint16_t csr[2];
292 uint16_t maxp[2];
293 uint16_t rxcount;
294 uint8_t type[2];
295 uint8_t interval[2];
296 uint8_t config;
297 uint8_t fifosize;
298 int timeout[2]; /* Always in microframes */
299
300 uint8_t *buf[2];
301 int fifolen[2];
302 int fifostart[2];
303 int fifoaddr[2];
304 MUSBPacket packey[2];
305 int status[2];
306 int ext_size[2];
307
308 /* For callbacks' use */
309 int epnum;
310 int interrupt[2];
311 MUSBState *musb;
312 USBCallback *delayed_cb[2];
313 QEMUTimer *intv_timer[2];
314 };
315
316 struct MUSBState {
317 qemu_irq irqs[musb_irq_max];
318 USBBus bus;
319 USBPort port;
320
321 int idx;
322 uint8_t devctl;
323 uint8_t power;
324 uint8_t faddr;
325
326 uint8_t intr;
327 uint8_t mask;
328 uint16_t tx_intr;
329 uint16_t tx_mask;
330 uint16_t rx_intr;
331 uint16_t rx_mask;
332
333 int setup_len;
334 int session;
335
336 uint8_t buf[0x8000];
337
338 /* Duplicating the world since 2008!... probably we should have 32
339 * logical, single endpoints instead. */
340 MUSBEndPoint ep[16];
341 };
342
343 void musb_reset(MUSBState *s)
344 {
345 int i;
346
347 s->faddr = 0x00;
348 s->devctl = 0;
349 s->power = MGC_M_POWER_HSENAB;
350 s->tx_intr = 0x0000;
351 s->rx_intr = 0x0000;
352 s->tx_mask = 0xffff;
353 s->rx_mask = 0xffff;
354 s->intr = 0x00;
355 s->mask = 0x06;
356 s->idx = 0;
357
358 s->setup_len = 0;
359 s->session = 0;
360 memset(s->buf, 0, sizeof(s->buf));
361
362 /* TODO: _DW */
363 s->ep[0].config = MGC_M_CONFIGDATA_SOFTCONE | MGC_M_CONFIGDATA_DYNFIFO;
364 for (i = 0; i < 16; i ++) {
365 s->ep[i].fifosize = 64;
366 s->ep[i].maxp[0] = 0x40;
367 s->ep[i].maxp[1] = 0x40;
368 s->ep[i].musb = s;
369 s->ep[i].epnum = i;
370 usb_packet_init(&s->ep[i].packey[0].p);
371 usb_packet_init(&s->ep[i].packey[1].p);
372 }
373 }
374
375 struct MUSBState *musb_init(DeviceState *parent_device, int gpio_base)
376 {
377 MUSBState *s = g_malloc0(sizeof(*s));
378 int i;
379
380 for (i = 0; i < musb_irq_max; i++) {
381 s->irqs[i] = qdev_get_gpio_in(parent_device, gpio_base + i);
382 }
383
384 musb_reset(s);
385
386 usb_bus_new(&s->bus, sizeof(s->bus), &musb_bus_ops, parent_device);
387 usb_register_port(&s->bus, &s->port, s, 0, &musb_port_ops,
388 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
389
390 return s;
391 }
392
393 static void musb_vbus_set(MUSBState *s, int level)
394 {
395 if (level)
396 s->devctl |= 3 << MGC_S_DEVCTL_VBUS;
397 else
398 s->devctl &= ~MGC_M_DEVCTL_VBUS;
399
400 qemu_set_irq(s->irqs[musb_set_vbus], level);
401 }
402
403 static void musb_intr_set(MUSBState *s, int line, int level)
404 {
405 if (!level) {
406 s->intr &= ~(1 << line);
407 qemu_irq_lower(s->irqs[line]);
408 } else if (s->mask & (1 << line)) {
409 s->intr |= 1 << line;
410 qemu_irq_raise(s->irqs[line]);
411 }
412 }
413
414 static void musb_tx_intr_set(MUSBState *s, int line, int level)
415 {
416 if (!level) {
417 s->tx_intr &= ~(1 << line);
418 if (!s->tx_intr)
419 qemu_irq_lower(s->irqs[musb_irq_tx]);
420 } else if (s->tx_mask & (1 << line)) {
421 s->tx_intr |= 1 << line;
422 qemu_irq_raise(s->irqs[musb_irq_tx]);
423 }
424 }
425
426 static void musb_rx_intr_set(MUSBState *s, int line, int level)
427 {
428 if (line) {
429 if (!level) {
430 s->rx_intr &= ~(1 << line);
431 if (!s->rx_intr)
432 qemu_irq_lower(s->irqs[musb_irq_rx]);
433 } else if (s->rx_mask & (1 << line)) {
434 s->rx_intr |= 1 << line;
435 qemu_irq_raise(s->irqs[musb_irq_rx]);
436 }
437 } else
438 musb_tx_intr_set(s, line, level);
439 }
440
441 uint32_t musb_core_intr_get(MUSBState *s)
442 {
443 return (s->rx_intr << 15) | s->tx_intr;
444 }
445
446 void musb_core_intr_clear(MUSBState *s, uint32_t mask)
447 {
448 if (s->rx_intr) {
449 s->rx_intr &= mask >> 15;
450 if (!s->rx_intr)
451 qemu_irq_lower(s->irqs[musb_irq_rx]);
452 }
453
454 if (s->tx_intr) {
455 s->tx_intr &= mask & 0xffff;
456 if (!s->tx_intr)
457 qemu_irq_lower(s->irqs[musb_irq_tx]);
458 }
459 }
460
461 void musb_set_size(MUSBState *s, int epnum, int size, int is_tx)
462 {
463 s->ep[epnum].ext_size[!is_tx] = size;
464 s->ep[epnum].fifostart[0] = 0;
465 s->ep[epnum].fifostart[1] = 0;
466 s->ep[epnum].fifolen[0] = 0;
467 s->ep[epnum].fifolen[1] = 0;
468 }
469
470 static void musb_session_update(MUSBState *s, int prev_dev, int prev_sess)
471 {
472 int detect_prev = prev_dev && prev_sess;
473 int detect = !!s->port.dev && s->session;
474
475 if (detect && !detect_prev) {
476 /* Let's skip the ID pin sense and VBUS sense formalities and
477 * and signal a successful SRP directly. This should work at least
478 * for the Linux driver stack. */
479 musb_intr_set(s, musb_irq_connect, 1);
480
481 if (s->port.dev->speed == USB_SPEED_LOW) {
482 s->devctl &= ~MGC_M_DEVCTL_FSDEV;
483 s->devctl |= MGC_M_DEVCTL_LSDEV;
484 } else {
485 s->devctl |= MGC_M_DEVCTL_FSDEV;
486 s->devctl &= ~MGC_M_DEVCTL_LSDEV;
487 }
488
489 /* A-mode? */
490 s->devctl &= ~MGC_M_DEVCTL_BDEVICE;
491
492 /* Host-mode bit? */
493 s->devctl |= MGC_M_DEVCTL_HM;
494 #if 1
495 musb_vbus_set(s, 1);
496 #endif
497 } else if (!detect && detect_prev) {
498 #if 1
499 musb_vbus_set(s, 0);
500 #endif
501 }
502 }
503
504 /* Attach or detach a device on our only port. */
505 static void musb_attach(USBPort *port)
506 {
507 MUSBState *s = (MUSBState *) port->opaque;
508
509 musb_intr_set(s, musb_irq_vbus_request, 1);
510 musb_session_update(s, 0, s->session);
511 }
512
513 static void musb_detach(USBPort *port)
514 {
515 MUSBState *s = (MUSBState *) port->opaque;
516
517 musb_async_cancel_device(s, port->dev);
518
519 musb_intr_set(s, musb_irq_disconnect, 1);
520 musb_session_update(s, 1, s->session);
521 }
522
523 static void musb_child_detach(USBPort *port, USBDevice *child)
524 {
525 MUSBState *s = (MUSBState *) port->opaque;
526
527 musb_async_cancel_device(s, child);
528 }
529
530 static void musb_cb_tick0(void *opaque)
531 {
532 MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
533
534 ep->delayed_cb[0](&ep->packey[0].p, opaque);
535 }
536
537 static void musb_cb_tick1(void *opaque)
538 {
539 MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
540
541 ep->delayed_cb[1](&ep->packey[1].p, opaque);
542 }
543
544 #define musb_cb_tick (dir ? musb_cb_tick1 : musb_cb_tick0)
545
546 static void musb_schedule_cb(USBPort *port, USBPacket *packey)
547 {
548 MUSBPacket *p = container_of(packey, MUSBPacket, p);
549 MUSBEndPoint *ep = p->ep;
550 int dir = p->dir;
551 int timeout = 0;
552
553 if (ep->status[dir] == USB_RET_NAK)
554 timeout = ep->timeout[dir];
555 else if (ep->interrupt[dir])
556 timeout = 8;
557 else {
558 musb_cb_tick(ep);
559 return;
560 }
561
562 if (!ep->intv_timer[dir])
563 ep->intv_timer[dir] = timer_new_ns(QEMU_CLOCK_VIRTUAL, musb_cb_tick, ep);
564
565 timer_mod(ep->intv_timer[dir], qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
566 muldiv64(timeout, NANOSECONDS_PER_SECOND, 8000));
567 }
568
569 static int musb_timeout(int ttype, int speed, int val)
570 {
571 #if 1
572 return val << 3;
573 #endif
574
575 switch (ttype) {
576 case USB_ENDPOINT_XFER_CONTROL:
577 if (val < 2)
578 return 0;
579 else if (speed == USB_SPEED_HIGH)
580 return 1 << (val - 1);
581 else
582 return 8 << (val - 1);
583
584 case USB_ENDPOINT_XFER_INT:
585 if (speed == USB_SPEED_HIGH)
586 if (val < 2)
587 return 0;
588 else
589 return 1 << (val - 1);
590 else
591 return val << 3;
592
593 case USB_ENDPOINT_XFER_BULK:
594 case USB_ENDPOINT_XFER_ISOC:
595 if (val < 2)
596 return 0;
597 else if (speed == USB_SPEED_HIGH)
598 return 1 << (val - 1);
599 else
600 return 8 << (val - 1);
601 /* TODO: what with low-speed Bulk and Isochronous? */
602 }
603
604 hw_error("bad interval\n");
605 }
606
607 static void musb_packet(MUSBState *s, MUSBEndPoint *ep,
608 int epnum, int pid, int len, USBCallback cb, int dir)
609 {
610 USBDevice *dev;
611 USBEndpoint *uep;
612 int idx = epnum && dir;
613 int id;
614 int ttype;
615
616 /* ep->type[0,1] contains:
617 * in bits 7:6 the speed (0 - invalid, 1 - high, 2 - full, 3 - slow)
618 * in bits 5:4 the transfer type (BULK / INT)
619 * in bits 3:0 the EP num
620 */
621 ttype = epnum ? (ep->type[idx] >> 4) & 3 : 0;
622
623 ep->timeout[dir] = musb_timeout(ttype,
624 ep->type[idx] >> 6, ep->interval[idx]);
625 ep->interrupt[dir] = ttype == USB_ENDPOINT_XFER_INT;
626 ep->delayed_cb[dir] = cb;
627
628 /* A wild guess on the FADDR semantics... */
629 dev = usb_find_device(&s->port, ep->faddr[idx]);
630 if (dev == NULL) {
631 return;
632 }
633 uep = usb_ep_get(dev, pid, ep->type[idx] & 0xf);
634 id = pid | (dev->addr << 16) | (uep->nr << 8);
635 usb_packet_setup(&ep->packey[dir].p, pid, uep, 0, id, false, true);
636 usb_packet_addbuf(&ep->packey[dir].p, ep->buf[idx], len);
637 ep->packey[dir].ep = ep;
638 ep->packey[dir].dir = dir;
639
640 usb_handle_packet(dev, &ep->packey[dir].p);
641
642 if (ep->packey[dir].p.status == USB_RET_ASYNC) {
643 usb_device_flush_ep_queue(dev, uep);
644 ep->status[dir] = len;
645 return;
646 }
647
648 if (ep->packey[dir].p.status == USB_RET_SUCCESS) {
649 ep->status[dir] = ep->packey[dir].p.actual_length;
650 } else {
651 ep->status[dir] = ep->packey[dir].p.status;
652 }
653 musb_schedule_cb(&s->port, &ep->packey[dir].p);
654 }
655
656 static void musb_tx_packet_complete(USBPacket *packey, void *opaque)
657 {
658 /* Unfortunately we can't use packey->devep because that's the remote
659 * endpoint number and may be different than our local. */
660 MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
661 int epnum = ep->epnum;
662 MUSBState *s = ep->musb;
663
664 ep->fifostart[0] = 0;
665 ep->fifolen[0] = 0;
666 #ifdef CLEAR_NAK
667 if (ep->status[0] != USB_RET_NAK) {
668 #endif
669 if (epnum)
670 ep->csr[0] &= ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY);
671 else
672 ep->csr[0] &= ~MGC_M_CSR0_TXPKTRDY;
673 #ifdef CLEAR_NAK
674 }
675 #endif
676
677 /* Clear all of the error bits first */
678 if (epnum)
679 ep->csr[0] &= ~(MGC_M_TXCSR_H_ERROR | MGC_M_TXCSR_H_RXSTALL |
680 MGC_M_TXCSR_H_NAKTIMEOUT);
681 else
682 ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
683 MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING);
684
685 if (ep->status[0] == USB_RET_STALL) {
686 /* Command not supported by target! */
687 ep->status[0] = 0;
688
689 if (epnum)
690 ep->csr[0] |= MGC_M_TXCSR_H_RXSTALL;
691 else
692 ep->csr[0] |= MGC_M_CSR0_H_RXSTALL;
693 }
694
695 if (ep->status[0] == USB_RET_NAK) {
696 ep->status[0] = 0;
697
698 /* NAK timeouts are only generated in Bulk transfers and
699 * Data-errors in Isochronous. */
700 if (ep->interrupt[0]) {
701 return;
702 }
703
704 if (epnum)
705 ep->csr[0] |= MGC_M_TXCSR_H_NAKTIMEOUT;
706 else
707 ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT;
708 }
709
710 if (ep->status[0] < 0) {
711 if (ep->status[0] == USB_RET_BABBLE)
712 musb_intr_set(s, musb_irq_rst_babble, 1);
713
714 /* Pretend we've tried three times already and failed (in
715 * case of USB_TOKEN_SETUP). */
716 if (epnum)
717 ep->csr[0] |= MGC_M_TXCSR_H_ERROR;
718 else
719 ep->csr[0] |= MGC_M_CSR0_H_ERROR;
720
721 musb_tx_intr_set(s, epnum, 1);
722 return;
723 }
724 /* TODO: check len for over/underruns of an OUT packet? */
725
726 #ifdef SETUPLEN_HACK
727 if (!epnum && ep->packey[0].pid == USB_TOKEN_SETUP)
728 s->setup_len = ep->packey[0].data[6];
729 #endif
730
731 /* In DMA mode: if no error, assert DMA request for this EP,
732 * and skip the interrupt. */
733 musb_tx_intr_set(s, epnum, 1);
734 }
735
736 static void musb_rx_packet_complete(USBPacket *packey, void *opaque)
737 {
738 /* Unfortunately we can't use packey->devep because that's the remote
739 * endpoint number and may be different than our local. */
740 MUSBEndPoint *ep = (MUSBEndPoint *) opaque;
741 int epnum = ep->epnum;
742 MUSBState *s = ep->musb;
743
744 ep->fifostart[1] = 0;
745 ep->fifolen[1] = 0;
746
747 #ifdef CLEAR_NAK
748 if (ep->status[1] != USB_RET_NAK) {
749 #endif
750 ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;
751 if (!epnum)
752 ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT;
753 #ifdef CLEAR_NAK
754 }
755 #endif
756
757 /* Clear all of the imaginable error bits first */
758 ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL |
759 MGC_M_RXCSR_DATAERROR);
760 if (!epnum)
761 ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
762 MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING);
763
764 if (ep->status[1] == USB_RET_STALL) {
765 ep->status[1] = 0;
766
767 ep->csr[1] |= MGC_M_RXCSR_H_RXSTALL;
768 if (!epnum)
769 ep->csr[0] |= MGC_M_CSR0_H_RXSTALL;
770 }
771
772 if (ep->status[1] == USB_RET_NAK) {
773 ep->status[1] = 0;
774
775 /* NAK timeouts are only generated in Bulk transfers and
776 * Data-errors in Isochronous. */
777 if (ep->interrupt[1]) {
778 musb_packet(s, ep, epnum, USB_TOKEN_IN,
779 packey->iov.size, musb_rx_packet_complete, 1);
780 return;
781 }
782
783 ep->csr[1] |= MGC_M_RXCSR_DATAERROR;
784 if (!epnum)
785 ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT;
786 }
787
788 if (ep->status[1] < 0) {
789 if (ep->status[1] == USB_RET_BABBLE) {
790 musb_intr_set(s, musb_irq_rst_babble, 1);
791 return;
792 }
793
794 /* Pretend we've tried three times already and failed (in
795 * case of a control transfer). */
796 ep->csr[1] |= MGC_M_RXCSR_H_ERROR;
797 if (!epnum)
798 ep->csr[0] |= MGC_M_CSR0_H_ERROR;
799
800 musb_rx_intr_set(s, epnum, 1);
801 return;
802 }
803 /* TODO: check len for over/underruns of an OUT packet? */
804 /* TODO: perhaps make use of e->ext_size[1] here. */
805
806 if (!(ep->csr[1] & (MGC_M_RXCSR_H_RXSTALL | MGC_M_RXCSR_DATAERROR))) {
807 ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
808 if (!epnum)
809 ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
810
811 ep->rxcount = ep->status[1]; /* XXX: MIN(packey->len, ep->maxp[1]); */
812 /* In DMA mode: assert DMA request for this EP */
813 }
814
815 /* Only if DMA has not been asserted */
816 musb_rx_intr_set(s, epnum, 1);
817 }
818
819 static void musb_async_cancel_device(MUSBState *s, USBDevice *dev)
820 {
821 int ep, dir;
822
823 for (ep = 0; ep < 16; ep++) {
824 for (dir = 0; dir < 2; dir++) {
825 if (!usb_packet_is_inflight(&s->ep[ep].packey[dir].p) ||
826 s->ep[ep].packey[dir].p.ep->dev != dev) {
827 continue;
828 }
829 usb_cancel_packet(&s->ep[ep].packey[dir].p);
830 /* status updates needed here? */
831 }
832 }
833 }
834
835 static void musb_tx_rdy(MUSBState *s, int epnum)
836 {
837 MUSBEndPoint *ep = s->ep + epnum;
838 int pid;
839 int total, valid = 0;
840 TRACE("start %d, len %d", ep->fifostart[0], ep->fifolen[0] );
841 ep->fifostart[0] += ep->fifolen[0];
842 ep->fifolen[0] = 0;
843
844 /* XXX: how's the total size of the packet retrieved exactly in
845 * the generic case? */
846 total = ep->maxp[0] & 0x3ff;
847
848 if (ep->ext_size[0]) {
849 total = ep->ext_size[0];
850 ep->ext_size[0] = 0;
851 valid = 1;
852 }
853
854 /* If the packet is not fully ready yet, wait for a next segment. */
855 if (epnum && (ep->fifostart[0]) < total)
856 return;
857
858 if (!valid)
859 total = ep->fifostart[0];
860
861 pid = USB_TOKEN_OUT;
862 if (!epnum && (ep->csr[0] & MGC_M_CSR0_H_SETUPPKT)) {
863 pid = USB_TOKEN_SETUP;
864 if (total != 8) {
865 TRACE("illegal SETUPPKT length of %i bytes", total);
866 }
867 /* Controller should retry SETUP packets three times on errors
868 * but it doesn't make sense for us to do that. */
869 }
870
871 musb_packet(s, ep, epnum, pid, total, musb_tx_packet_complete, 0);
872 }
873
874 static void musb_rx_req(MUSBState *s, int epnum)
875 {
876 MUSBEndPoint *ep = s->ep + epnum;
877 int total;
878
879 /* If we already have a packet, which didn't fit into the
880 * 64 bytes of the FIFO, only move the FIFO start and return. (Obsolete) */
881 if (ep->packey[1].p.pid == USB_TOKEN_IN && ep->status[1] >= 0 &&
882 (ep->fifostart[1]) + ep->rxcount <
883 ep->packey[1].p.iov.size) {
884 TRACE("0x%08x, %d", ep->fifostart[1], ep->rxcount );
885 ep->fifostart[1] += ep->rxcount;
886 ep->fifolen[1] = 0;
887
888 ep->rxcount = MIN(ep->packey[0].p.iov.size - (ep->fifostart[1]),
889 ep->maxp[1]);
890
891 ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT;
892 if (!epnum)
893 ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT;
894
895 /* Clear all of the error bits first */
896 ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL |
897 MGC_M_RXCSR_DATAERROR);
898 if (!epnum)
899 ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL |
900 MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING);
901
902 ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY;
903 if (!epnum)
904 ep->csr[0] |= MGC_M_CSR0_RXPKTRDY;
905 musb_rx_intr_set(s, epnum, 1);
906 return;
907 }
908
909 /* The driver sets maxp[1] to 64 or less because it knows the hardware
910 * FIFO is this deep. Bigger packets get split in
911 * usb_generic_handle_packet but we can also do the splitting locally
912 * for performance. It turns out we can also have a bigger FIFO and
913 * ignore the limit set in ep->maxp[1]. The Linux MUSB driver deals
914 * OK with single packets of even 32KB and we avoid splitting, however
915 * usb_msd.c sometimes sends a packet bigger than what Linux expects
916 * (e.g. 8192 bytes instead of 4096) and we get an OVERRUN. Splitting
917 * hides this overrun from Linux. Up to 4096 everything is fine
918 * though. Currently this is disabled.
919 *
920 * XXX: mind ep->fifosize. */
921 total = MIN(ep->maxp[1] & 0x3ff, sizeof(s->buf));
922
923 #ifdef SETUPLEN_HACK
924 /* Why should *we* do that instead of Linux? */
925 if (!epnum) {
926 if (ep->packey[0].p.devaddr == 2) {
927 total = MIN(s->setup_len, 8);
928 } else {
929 total = MIN(s->setup_len, 64);
930 }
931 s->setup_len -= total;
932 }
933 #endif
934
935 musb_packet(s, ep, epnum, USB_TOKEN_IN, total, musb_rx_packet_complete, 1);
936 }
937
938 static uint8_t musb_read_fifo(MUSBEndPoint *ep)
939 {
940 uint8_t value;
941 if (ep->fifolen[1] >= 64) {
942 /* We have a FIFO underrun */
943 TRACE("EP%d FIFO is now empty, stop reading", ep->epnum);
944 return 0x00000000;
945 }
946 /* In DMA mode clear RXPKTRDY and set REQPKT automatically
947 * (if AUTOREQ is set) */
948
949 ep->csr[1] &= ~MGC_M_RXCSR_FIFOFULL;
950 value=ep->buf[1][ep->fifostart[1] + ep->fifolen[1] ++];
951 TRACE("EP%d 0x%02x, %d", ep->epnum, value, ep->fifolen[1] );
952 return value;
953 }
954
955 static void musb_write_fifo(MUSBEndPoint *ep, uint8_t value)
956 {
957 TRACE("EP%d = %02x", ep->epnum, value);
958 if (ep->fifolen[0] >= 64) {
959 /* We have a FIFO overrun */
960 TRACE("EP%d FIFO exceeded 64 bytes, stop feeding data", ep->epnum);
961 return;
962 }
963
964 ep->buf[0][ep->fifostart[0] + ep->fifolen[0] ++] = value;
965 ep->csr[0] |= MGC_M_TXCSR_FIFONOTEMPTY;
966 }
967
968 static void musb_ep_frame_cancel(MUSBEndPoint *ep, int dir)
969 {
970 if (ep->intv_timer[dir])
971 timer_del(ep->intv_timer[dir]);
972 }
973
974 /* Bus control */
975 static uint8_t musb_busctl_readb(void *opaque, int ep, int addr)
976 {
977 MUSBState *s = (MUSBState *) opaque;
978
979 switch (addr) {
980 /* For USB2.0 HS hubs only */
981 case MUSB_HDRC_TXHUBADDR:
982 return s->ep[ep].haddr[0];
983 case MUSB_HDRC_TXHUBPORT:
984 return s->ep[ep].hport[0];
985 case MUSB_HDRC_RXHUBADDR:
986 return s->ep[ep].haddr[1];
987 case MUSB_HDRC_RXHUBPORT:
988 return s->ep[ep].hport[1];
989
990 default:
991 TRACE("unknown register 0x%02x", addr);
992 return 0x00;
993 };
994 }
995
996 static void musb_busctl_writeb(void *opaque, int ep, int addr, uint8_t value)
997 {
998 MUSBState *s = (MUSBState *) opaque;
999
1000 switch (addr) {
1001 case MUSB_HDRC_TXFUNCADDR:
1002 s->ep[ep].faddr[0] = value;
1003 break;
1004 case MUSB_HDRC_RXFUNCADDR:
1005 s->ep[ep].faddr[1] = value;
1006 break;
1007 case MUSB_HDRC_TXHUBADDR:
1008 s->ep[ep].haddr[0] = value;
1009 break;
1010 case MUSB_HDRC_TXHUBPORT:
1011 s->ep[ep].hport[0] = value;
1012 break;
1013 case MUSB_HDRC_RXHUBADDR:
1014 s->ep[ep].haddr[1] = value;
1015 break;
1016 case MUSB_HDRC_RXHUBPORT:
1017 s->ep[ep].hport[1] = value;
1018 break;
1019
1020 default:
1021 TRACE("unknown register 0x%02x", addr);
1022 break;
1023 };
1024 }
1025
1026 static uint16_t musb_busctl_readh(void *opaque, int ep, int addr)
1027 {
1028 MUSBState *s = (MUSBState *) opaque;
1029
1030 switch (addr) {
1031 case MUSB_HDRC_TXFUNCADDR:
1032 return s->ep[ep].faddr[0];
1033 case MUSB_HDRC_RXFUNCADDR:
1034 return s->ep[ep].faddr[1];
1035
1036 default:
1037 return musb_busctl_readb(s, ep, addr) |
1038 (musb_busctl_readb(s, ep, addr | 1) << 8);
1039 };
1040 }
1041
1042 static void musb_busctl_writeh(void *opaque, int ep, int addr, uint16_t value)
1043 {
1044 MUSBState *s = (MUSBState *) opaque;
1045
1046 switch (addr) {
1047 case MUSB_HDRC_TXFUNCADDR:
1048 s->ep[ep].faddr[0] = value;
1049 break;
1050 case MUSB_HDRC_RXFUNCADDR:
1051 s->ep[ep].faddr[1] = value;
1052 break;
1053
1054 default:
1055 musb_busctl_writeb(s, ep, addr, value & 0xff);
1056 musb_busctl_writeb(s, ep, addr | 1, value >> 8);
1057 };
1058 }
1059
1060 /* Endpoint control */
1061 static uint8_t musb_ep_readb(void *opaque, int ep, int addr)
1062 {
1063 MUSBState *s = (MUSBState *) opaque;
1064
1065 switch (addr) {
1066 case MUSB_HDRC_TXTYPE:
1067 return s->ep[ep].type[0];
1068 case MUSB_HDRC_TXINTERVAL:
1069 return s->ep[ep].interval[0];
1070 case MUSB_HDRC_RXTYPE:
1071 return s->ep[ep].type[1];
1072 case MUSB_HDRC_RXINTERVAL:
1073 return s->ep[ep].interval[1];
1074 case (MUSB_HDRC_FIFOSIZE & ~1):
1075 return 0x00;
1076 case MUSB_HDRC_FIFOSIZE:
1077 return ep ? s->ep[ep].fifosize : s->ep[ep].config;
1078 case MUSB_HDRC_RXCOUNT:
1079 return s->ep[ep].rxcount;
1080
1081 default:
1082 TRACE("unknown register 0x%02x", addr);
1083 return 0x00;
1084 };
1085 }
1086
1087 static void musb_ep_writeb(void *opaque, int ep, int addr, uint8_t value)
1088 {
1089 MUSBState *s = (MUSBState *) opaque;
1090
1091 switch (addr) {
1092 case MUSB_HDRC_TXTYPE:
1093 s->ep[ep].type[0] = value;
1094 break;
1095 case MUSB_HDRC_TXINTERVAL:
1096 s->ep[ep].interval[0] = value;
1097 musb_ep_frame_cancel(&s->ep[ep], 0);
1098 break;
1099 case MUSB_HDRC_RXTYPE:
1100 s->ep[ep].type[1] = value;
1101 break;
1102 case MUSB_HDRC_RXINTERVAL:
1103 s->ep[ep].interval[1] = value;
1104 musb_ep_frame_cancel(&s->ep[ep], 1);
1105 break;
1106 case (MUSB_HDRC_FIFOSIZE & ~1):
1107 break;
1108 case MUSB_HDRC_FIFOSIZE:
1109 TRACE("somebody messes with fifosize (now %i bytes)", value);
1110 s->ep[ep].fifosize = value;
1111 break;
1112 default:
1113 TRACE("unknown register 0x%02x", addr);
1114 break;
1115 };
1116 }
1117
1118 static uint16_t musb_ep_readh(void *opaque, int ep, int addr)
1119 {
1120 MUSBState *s = (MUSBState *) opaque;
1121 uint16_t ret;
1122
1123 switch (addr) {
1124 case MUSB_HDRC_TXMAXP:
1125 return s->ep[ep].maxp[0];
1126 case MUSB_HDRC_TXCSR:
1127 return s->ep[ep].csr[0];
1128 case MUSB_HDRC_RXMAXP:
1129 return s->ep[ep].maxp[1];
1130 case MUSB_HDRC_RXCSR:
1131 ret = s->ep[ep].csr[1];
1132
1133 /* TODO: This and other bits probably depend on
1134 * ep->csr[1] & MGC_M_RXCSR_AUTOCLEAR. */
1135 if (s->ep[ep].csr[1] & MGC_M_RXCSR_AUTOCLEAR)
1136 s->ep[ep].csr[1] &= ~MGC_M_RXCSR_RXPKTRDY;
1137
1138 return ret;
1139 case MUSB_HDRC_RXCOUNT:
1140 return s->ep[ep].rxcount;
1141
1142 default:
1143 return musb_ep_readb(s, ep, addr) |
1144 (musb_ep_readb(s, ep, addr | 1) << 8);
1145 };
1146 }
1147
1148 static void musb_ep_writeh(void *opaque, int ep, int addr, uint16_t value)
1149 {
1150 MUSBState *s = (MUSBState *) opaque;
1151
1152 switch (addr) {
1153 case MUSB_HDRC_TXMAXP:
1154 s->ep[ep].maxp[0] = value;
1155 break;
1156 case MUSB_HDRC_TXCSR:
1157 if (ep) {
1158 s->ep[ep].csr[0] &= value & 0xa6;
1159 s->ep[ep].csr[0] |= value & 0xff59;
1160 } else {
1161 s->ep[ep].csr[0] &= value & 0x85;
1162 s->ep[ep].csr[0] |= value & 0xf7a;
1163 }
1164
1165 musb_ep_frame_cancel(&s->ep[ep], 0);
1166
1167 if ((ep && (value & MGC_M_TXCSR_FLUSHFIFO)) ||
1168 (!ep && (value & MGC_M_CSR0_FLUSHFIFO))) {
1169 s->ep[ep].fifolen[0] = 0;
1170 s->ep[ep].fifostart[0] = 0;
1171 if (ep)
1172 s->ep[ep].csr[0] &=
1173 ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY);
1174 else
1175 s->ep[ep].csr[0] &=
1176 ~(MGC_M_CSR0_TXPKTRDY | MGC_M_CSR0_RXPKTRDY);
1177 }
1178 if (
1179 (ep &&
1180 #ifdef CLEAR_NAK
1181 (value & MGC_M_TXCSR_TXPKTRDY) &&
1182 !(value & MGC_M_TXCSR_H_NAKTIMEOUT)) ||
1183 #else
1184 (value & MGC_M_TXCSR_TXPKTRDY)) ||
1185 #endif
1186 (!ep &&
1187 #ifdef CLEAR_NAK
1188 (value & MGC_M_CSR0_TXPKTRDY) &&
1189 !(value & MGC_M_CSR0_H_NAKTIMEOUT)))
1190 #else
1191 (value & MGC_M_CSR0_TXPKTRDY)))
1192 #endif
1193 musb_tx_rdy(s, ep);
1194 if (!ep &&
1195 (value & MGC_M_CSR0_H_REQPKT) &&
1196 #ifdef CLEAR_NAK
1197 !(value & (MGC_M_CSR0_H_NAKTIMEOUT |
1198 MGC_M_CSR0_RXPKTRDY)))
1199 #else
1200 !(value & MGC_M_CSR0_RXPKTRDY))
1201 #endif
1202 musb_rx_req(s, ep);
1203 break;
1204
1205 case MUSB_HDRC_RXMAXP:
1206 s->ep[ep].maxp[1] = value;
1207 break;
1208 case MUSB_HDRC_RXCSR:
1209 /* (DMA mode only) */
1210 if (
1211 (value & MGC_M_RXCSR_H_AUTOREQ) &&
1212 !(value & MGC_M_RXCSR_RXPKTRDY) &&
1213 (s->ep[ep].csr[1] & MGC_M_RXCSR_RXPKTRDY))
1214 value |= MGC_M_RXCSR_H_REQPKT;
1215
1216 s->ep[ep].csr[1] &= 0x102 | (value & 0x4d);
1217 s->ep[ep].csr[1] |= value & 0xfeb0;
1218
1219 musb_ep_frame_cancel(&s->ep[ep], 1);
1220
1221 if (value & MGC_M_RXCSR_FLUSHFIFO) {
1222 s->ep[ep].fifolen[1] = 0;
1223 s->ep[ep].fifostart[1] = 0;
1224 s->ep[ep].csr[1] &= ~(MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY);
1225 /* If double buffering and we have two packets ready, flush
1226 * only the first one and set up the fifo at the second packet. */
1227 }
1228 #ifdef CLEAR_NAK
1229 if ((value & MGC_M_RXCSR_H_REQPKT) && !(value & MGC_M_RXCSR_DATAERROR))
1230 #else
1231 if (value & MGC_M_RXCSR_H_REQPKT)
1232 #endif
1233 musb_rx_req(s, ep);
1234 break;
1235 case MUSB_HDRC_RXCOUNT:
1236 s->ep[ep].rxcount = value;
1237 break;
1238
1239 default:
1240 musb_ep_writeb(s, ep, addr, value & 0xff);
1241 musb_ep_writeb(s, ep, addr | 1, value >> 8);
1242 };
1243 }
1244
1245 /* Generic control */
1246 static uint32_t musb_readb(void *opaque, hwaddr addr)
1247 {
1248 MUSBState *s = (MUSBState *) opaque;
1249 int ep, i;
1250 uint8_t ret;
1251
1252 switch (addr) {
1253 case MUSB_HDRC_FADDR:
1254 return s->faddr;
1255 case MUSB_HDRC_POWER:
1256 return s->power;
1257 case MUSB_HDRC_INTRUSB:
1258 ret = s->intr;
1259 for (i = 0; i < sizeof(ret) * 8; i ++)
1260 if (ret & (1 << i))
1261 musb_intr_set(s, i, 0);
1262 return ret;
1263 case MUSB_HDRC_INTRUSBE:
1264 return s->mask;
1265 case MUSB_HDRC_INDEX:
1266 return s->idx;
1267 case MUSB_HDRC_TESTMODE:
1268 return 0x00;
1269
1270 case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
1271 return musb_ep_readb(s, s->idx, addr & 0xf);
1272
1273 case MUSB_HDRC_DEVCTL:
1274 return s->devctl;
1275
1276 case MUSB_HDRC_TXFIFOSZ:
1277 case MUSB_HDRC_RXFIFOSZ:
1278 case MUSB_HDRC_VCTRL:
1279 /* TODO */
1280 return 0x00;
1281
1282 case MUSB_HDRC_HWVERS:
1283 return (1 << 10) | 400;
1284
1285 case (MUSB_HDRC_VCTRL | 1):
1286 case (MUSB_HDRC_HWVERS | 1):
1287 case (MUSB_HDRC_DEVCTL | 1):
1288 return 0x00;
1289
1290 case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
1291 ep = (addr >> 3) & 0xf;
1292 return musb_busctl_readb(s, ep, addr & 0x7);
1293
1294 case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
1295 ep = (addr >> 4) & 0xf;
1296 return musb_ep_readb(s, ep, addr & 0xf);
1297
1298 case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
1299 ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
1300 return musb_read_fifo(s->ep + ep);
1301
1302 default:
1303 TRACE("unknown register 0x%02x", (int) addr);
1304 return 0x00;
1305 };
1306 }
1307
1308 static void musb_writeb(void *opaque, hwaddr addr, uint32_t value)
1309 {
1310 MUSBState *s = (MUSBState *) opaque;
1311 int ep;
1312
1313 switch (addr) {
1314 case MUSB_HDRC_FADDR:
1315 s->faddr = value & 0x7f;
1316 break;
1317 case MUSB_HDRC_POWER:
1318 s->power = (value & 0xef) | (s->power & 0x10);
1319 /* MGC_M_POWER_RESET is also read-only in Peripheral Mode */
1320 if ((value & MGC_M_POWER_RESET) && s->port.dev) {
1321 usb_device_reset(s->port.dev);
1322 /* Negotiate high-speed operation if MGC_M_POWER_HSENAB is set. */
1323 if ((value & MGC_M_POWER_HSENAB) &&
1324 s->port.dev->speed == USB_SPEED_HIGH)
1325 s->power |= MGC_M_POWER_HSMODE; /* Success */
1326 /* Restart frame counting. */
1327 }
1328 if (value & MGC_M_POWER_SUSPENDM) {
1329 /* When all transfers finish, suspend and if MGC_M_POWER_ENSUSPEND
1330 * is set, also go into low power mode. Frame counting stops. */
1331 /* XXX: Cleared when the interrupt register is read */
1332 }
1333 if (value & MGC_M_POWER_RESUME) {
1334 /* Wait 20ms and signal resuming on the bus. Frame counting
1335 * restarts. */
1336 }
1337 break;
1338 case MUSB_HDRC_INTRUSB:
1339 break;
1340 case MUSB_HDRC_INTRUSBE:
1341 s->mask = value & 0xff;
1342 break;
1343 case MUSB_HDRC_INDEX:
1344 s->idx = value & 0xf;
1345 break;
1346 case MUSB_HDRC_TESTMODE:
1347 break;
1348
1349 case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
1350 musb_ep_writeb(s, s->idx, addr & 0xf, value);
1351 break;
1352
1353 case MUSB_HDRC_DEVCTL:
1354 s->session = !!(value & MGC_M_DEVCTL_SESSION);
1355 musb_session_update(s,
1356 !!s->port.dev,
1357 !!(s->devctl & MGC_M_DEVCTL_SESSION));
1358
1359 /* It seems this is the only R/W bit in this register? */
1360 s->devctl &= ~MGC_M_DEVCTL_SESSION;
1361 s->devctl |= value & MGC_M_DEVCTL_SESSION;
1362 break;
1363
1364 case MUSB_HDRC_TXFIFOSZ:
1365 case MUSB_HDRC_RXFIFOSZ:
1366 case MUSB_HDRC_VCTRL:
1367 /* TODO */
1368 break;
1369
1370 case (MUSB_HDRC_VCTRL | 1):
1371 case (MUSB_HDRC_DEVCTL | 1):
1372 break;
1373
1374 case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
1375 ep = (addr >> 3) & 0xf;
1376 musb_busctl_writeb(s, ep, addr & 0x7, value);
1377 break;
1378
1379 case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
1380 ep = (addr >> 4) & 0xf;
1381 musb_ep_writeb(s, ep, addr & 0xf, value);
1382 break;
1383
1384 case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
1385 ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
1386 musb_write_fifo(s->ep + ep, value & 0xff);
1387 break;
1388
1389 default:
1390 TRACE("unknown register 0x%02x", (int) addr);
1391 break;
1392 };
1393 }
1394
1395 static uint32_t musb_readh(void *opaque, hwaddr addr)
1396 {
1397 MUSBState *s = (MUSBState *) opaque;
1398 int ep, i;
1399 uint16_t ret;
1400
1401 switch (addr) {
1402 case MUSB_HDRC_INTRTX:
1403 ret = s->tx_intr;
1404 /* Auto clear */
1405 for (i = 0; i < sizeof(ret) * 8; i ++)
1406 if (ret & (1 << i))
1407 musb_tx_intr_set(s, i, 0);
1408 return ret;
1409 case MUSB_HDRC_INTRRX:
1410 ret = s->rx_intr;
1411 /* Auto clear */
1412 for (i = 0; i < sizeof(ret) * 8; i ++)
1413 if (ret & (1 << i))
1414 musb_rx_intr_set(s, i, 0);
1415 return ret;
1416 case MUSB_HDRC_INTRTXE:
1417 return s->tx_mask;
1418 case MUSB_HDRC_INTRRXE:
1419 return s->rx_mask;
1420
1421 case MUSB_HDRC_FRAME:
1422 /* TODO */
1423 return 0x0000;
1424 case MUSB_HDRC_TXFIFOADDR:
1425 return s->ep[s->idx].fifoaddr[0];
1426 case MUSB_HDRC_RXFIFOADDR:
1427 return s->ep[s->idx].fifoaddr[1];
1428
1429 case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
1430 return musb_ep_readh(s, s->idx, addr & 0xf);
1431
1432 case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
1433 ep = (addr >> 3) & 0xf;
1434 return musb_busctl_readh(s, ep, addr & 0x7);
1435
1436 case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
1437 ep = (addr >> 4) & 0xf;
1438 return musb_ep_readh(s, ep, addr & 0xf);
1439
1440 case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
1441 ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
1442 return (musb_read_fifo(s->ep + ep) | musb_read_fifo(s->ep + ep) << 8);
1443
1444 default:
1445 return musb_readb(s, addr) | (musb_readb(s, addr | 1) << 8);
1446 };
1447 }
1448
1449 static void musb_writeh(void *opaque, hwaddr addr, uint32_t value)
1450 {
1451 MUSBState *s = (MUSBState *) opaque;
1452 int ep;
1453
1454 switch (addr) {
1455 case MUSB_HDRC_INTRTXE:
1456 s->tx_mask = value;
1457 /* XXX: the masks seem to apply on the raising edge like with
1458 * edge-triggered interrupts, thus no need to update. I may be
1459 * wrong though. */
1460 break;
1461 case MUSB_HDRC_INTRRXE:
1462 s->rx_mask = value;
1463 break;
1464
1465 case MUSB_HDRC_FRAME:
1466 /* TODO */
1467 break;
1468 case MUSB_HDRC_TXFIFOADDR:
1469 s->ep[s->idx].fifoaddr[0] = value;
1470 s->ep[s->idx].buf[0] =
1471 s->buf + ((value << 3) & 0x7ff );
1472 break;
1473 case MUSB_HDRC_RXFIFOADDR:
1474 s->ep[s->idx].fifoaddr[1] = value;
1475 s->ep[s->idx].buf[1] =
1476 s->buf + ((value << 3) & 0x7ff);
1477 break;
1478
1479 case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf):
1480 musb_ep_writeh(s, s->idx, addr & 0xf, value);
1481 break;
1482
1483 case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f):
1484 ep = (addr >> 3) & 0xf;
1485 musb_busctl_writeh(s, ep, addr & 0x7, value);
1486 break;
1487
1488 case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff):
1489 ep = (addr >> 4) & 0xf;
1490 musb_ep_writeh(s, ep, addr & 0xf, value);
1491 break;
1492
1493 case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
1494 ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
1495 musb_write_fifo(s->ep + ep, value & 0xff);
1496 musb_write_fifo(s->ep + ep, (value >> 8) & 0xff);
1497 break;
1498
1499 default:
1500 musb_writeb(s, addr, value & 0xff);
1501 musb_writeb(s, addr | 1, value >> 8);
1502 };
1503 }
1504
1505 static uint32_t musb_readw(void *opaque, hwaddr addr)
1506 {
1507 MUSBState *s = (MUSBState *) opaque;
1508 int ep;
1509
1510 switch (addr) {
1511 case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
1512 ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
1513 return ( musb_read_fifo(s->ep + ep) |
1514 musb_read_fifo(s->ep + ep) << 8 |
1515 musb_read_fifo(s->ep + ep) << 16 |
1516 musb_read_fifo(s->ep + ep) << 24 );
1517 default:
1518 TRACE("unknown register 0x%02x", (int) addr);
1519 return 0x00000000;
1520 };
1521 }
1522
1523 static void musb_writew(void *opaque, hwaddr addr, uint32_t value)
1524 {
1525 MUSBState *s = (MUSBState *) opaque;
1526 int ep;
1527
1528 switch (addr) {
1529 case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f):
1530 ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf;
1531 musb_write_fifo(s->ep + ep, value & 0xff);
1532 musb_write_fifo(s->ep + ep, (value >> 8 ) & 0xff);
1533 musb_write_fifo(s->ep + ep, (value >> 16) & 0xff);
1534 musb_write_fifo(s->ep + ep, (value >> 24) & 0xff);
1535 break;
1536 default:
1537 TRACE("unknown register 0x%02x", (int) addr);
1538 break;
1539 };
1540 }
1541
1542 CPUReadMemoryFunc * const musb_read[] = {
1543 musb_readb,
1544 musb_readh,
1545 musb_readw,
1546 };
1547
1548 CPUWriteMemoryFunc * const musb_write[] = {
1549 musb_writeb,
1550 musb_writeh,
1551 musb_writew,
1552 };
Random patches