Add bios-256k.bin to BLOBS on Makefile
[qemu/kevin.git] / target-arm / helper.c
blobc708f15e278b312f091d0593272e881a1cf64020
1 #include "cpu.h"
2 #include "exec/gdbstub.h"
3 #include "helper.h"
4 #include "qemu/host-utils.h"
5 #include "sysemu/arch_init.h"
6 #include "sysemu/sysemu.h"
7 #include "qemu/bitops.h"
9 #ifndef CONFIG_USER_ONLY
10 static inline int get_phys_addr(CPUARMState *env, uint32_t address,
11 int access_type, int is_user,
12 hwaddr *phys_ptr, int *prot,
13 target_ulong *page_size);
14 #endif
16 static int vfp_gdb_get_reg(CPUARMState *env, uint8_t *buf, int reg)
18 int nregs;
20 /* VFP data registers are always little-endian. */
21 nregs = arm_feature(env, ARM_FEATURE_VFP3) ? 32 : 16;
22 if (reg < nregs) {
23 stfq_le_p(buf, env->vfp.regs[reg]);
24 return 8;
26 if (arm_feature(env, ARM_FEATURE_NEON)) {
27 /* Aliases for Q regs. */
28 nregs += 16;
29 if (reg < nregs) {
30 stfq_le_p(buf, env->vfp.regs[(reg - 32) * 2]);
31 stfq_le_p(buf + 8, env->vfp.regs[(reg - 32) * 2 + 1]);
32 return 16;
35 switch (reg - nregs) {
36 case 0: stl_p(buf, env->vfp.xregs[ARM_VFP_FPSID]); return 4;
37 case 1: stl_p(buf, env->vfp.xregs[ARM_VFP_FPSCR]); return 4;
38 case 2: stl_p(buf, env->vfp.xregs[ARM_VFP_FPEXC]); return 4;
40 return 0;
43 static int vfp_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg)
45 int nregs;
47 nregs = arm_feature(env, ARM_FEATURE_VFP3) ? 32 : 16;
48 if (reg < nregs) {
49 env->vfp.regs[reg] = ldfq_le_p(buf);
50 return 8;
52 if (arm_feature(env, ARM_FEATURE_NEON)) {
53 nregs += 16;
54 if (reg < nregs) {
55 env->vfp.regs[(reg - 32) * 2] = ldfq_le_p(buf);
56 env->vfp.regs[(reg - 32) * 2 + 1] = ldfq_le_p(buf + 8);
57 return 16;
60 switch (reg - nregs) {
61 case 0: env->vfp.xregs[ARM_VFP_FPSID] = ldl_p(buf); return 4;
62 case 1: env->vfp.xregs[ARM_VFP_FPSCR] = ldl_p(buf); return 4;
63 case 2: env->vfp.xregs[ARM_VFP_FPEXC] = ldl_p(buf) & (1 << 30); return 4;
65 return 0;
68 static int aarch64_fpu_gdb_get_reg(CPUARMState *env, uint8_t *buf, int reg)
70 switch (reg) {
71 case 0 ... 31:
72 /* 128 bit FP register */
73 stfq_le_p(buf, env->vfp.regs[reg * 2]);
74 stfq_le_p(buf + 8, env->vfp.regs[reg * 2 + 1]);
75 return 16;
76 case 32:
77 /* FPSR */
78 stl_p(buf, vfp_get_fpsr(env));
79 return 4;
80 case 33:
81 /* FPCR */
82 stl_p(buf, vfp_get_fpcr(env));
83 return 4;
84 default:
85 return 0;
89 static int aarch64_fpu_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg)
91 switch (reg) {
92 case 0 ... 31:
93 /* 128 bit FP register */
94 env->vfp.regs[reg * 2] = ldfq_le_p(buf);
95 env->vfp.regs[reg * 2 + 1] = ldfq_le_p(buf + 8);
96 return 16;
97 case 32:
98 /* FPSR */
99 vfp_set_fpsr(env, ldl_p(buf));
100 return 4;
101 case 33:
102 /* FPCR */
103 vfp_set_fpcr(env, ldl_p(buf));
104 return 4;
105 default:
106 return 0;
110 static int raw_read(CPUARMState *env, const ARMCPRegInfo *ri,
111 uint64_t *value)
113 if (ri->type & ARM_CP_64BIT) {
114 *value = CPREG_FIELD64(env, ri);
115 } else {
116 *value = CPREG_FIELD32(env, ri);
118 return 0;
121 static int raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
122 uint64_t value)
124 if (ri->type & ARM_CP_64BIT) {
125 CPREG_FIELD64(env, ri) = value;
126 } else {
127 CPREG_FIELD32(env, ri) = value;
129 return 0;
132 static bool read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri,
133 uint64_t *v)
135 /* Raw read of a coprocessor register (as needed for migration, etc)
136 * return true on success, false if the read is impossible for some reason.
138 if (ri->type & ARM_CP_CONST) {
139 *v = ri->resetvalue;
140 } else if (ri->raw_readfn) {
141 return (ri->raw_readfn(env, ri, v) == 0);
142 } else if (ri->readfn) {
143 return (ri->readfn(env, ri, v) == 0);
144 } else {
145 raw_read(env, ri, v);
147 return true;
150 static bool write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri,
151 int64_t v)
153 /* Raw write of a coprocessor register (as needed for migration, etc).
154 * Return true on success, false if the write is impossible for some reason.
155 * Note that constant registers are treated as write-ignored; the
156 * caller should check for success by whether a readback gives the
157 * value written.
159 if (ri->type & ARM_CP_CONST) {
160 return true;
161 } else if (ri->raw_writefn) {
162 return (ri->raw_writefn(env, ri, v) == 0);
163 } else if (ri->writefn) {
164 return (ri->writefn(env, ri, v) == 0);
165 } else {
166 raw_write(env, ri, v);
168 return true;
171 bool write_cpustate_to_list(ARMCPU *cpu)
173 /* Write the coprocessor state from cpu->env to the (index,value) list. */
174 int i;
175 bool ok = true;
177 for (i = 0; i < cpu->cpreg_array_len; i++) {
178 uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]);
179 const ARMCPRegInfo *ri;
180 uint64_t v;
181 ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
182 if (!ri) {
183 ok = false;
184 continue;
186 if (ri->type & ARM_CP_NO_MIGRATE) {
187 continue;
189 if (!read_raw_cp_reg(&cpu->env, ri, &v)) {
190 ok = false;
191 continue;
193 cpu->cpreg_values[i] = v;
195 return ok;
198 bool write_list_to_cpustate(ARMCPU *cpu)
200 int i;
201 bool ok = true;
203 for (i = 0; i < cpu->cpreg_array_len; i++) {
204 uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]);
205 uint64_t v = cpu->cpreg_values[i];
206 uint64_t readback;
207 const ARMCPRegInfo *ri;
209 ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
210 if (!ri) {
211 ok = false;
212 continue;
214 if (ri->type & ARM_CP_NO_MIGRATE) {
215 continue;
217 /* Write value and confirm it reads back as written
218 * (to catch read-only registers and partially read-only
219 * registers where the incoming migration value doesn't match)
221 if (!write_raw_cp_reg(&cpu->env, ri, v) ||
222 !read_raw_cp_reg(&cpu->env, ri, &readback) ||
223 readback != v) {
224 ok = false;
227 return ok;
230 static void add_cpreg_to_list(gpointer key, gpointer opaque)
232 ARMCPU *cpu = opaque;
233 uint64_t regidx;
234 const ARMCPRegInfo *ri;
236 regidx = *(uint32_t *)key;
237 ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
239 if (!(ri->type & ARM_CP_NO_MIGRATE)) {
240 cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx);
241 /* The value array need not be initialized at this point */
242 cpu->cpreg_array_len++;
246 static void count_cpreg(gpointer key, gpointer opaque)
248 ARMCPU *cpu = opaque;
249 uint64_t regidx;
250 const ARMCPRegInfo *ri;
252 regidx = *(uint32_t *)key;
253 ri = get_arm_cp_reginfo(cpu->cp_regs, regidx);
255 if (!(ri->type & ARM_CP_NO_MIGRATE)) {
256 cpu->cpreg_array_len++;
260 static gint cpreg_key_compare(gconstpointer a, gconstpointer b)
262 uint64_t aidx = cpreg_to_kvm_id(*(uint32_t *)a);
263 uint64_t bidx = cpreg_to_kvm_id(*(uint32_t *)b);
265 if (aidx > bidx) {
266 return 1;
268 if (aidx < bidx) {
269 return -1;
271 return 0;
274 static void cpreg_make_keylist(gpointer key, gpointer value, gpointer udata)
276 GList **plist = udata;
278 *plist = g_list_prepend(*plist, key);
281 void init_cpreg_list(ARMCPU *cpu)
283 /* Initialise the cpreg_tuples[] array based on the cp_regs hash.
284 * Note that we require cpreg_tuples[] to be sorted by key ID.
286 GList *keys = NULL;
287 int arraylen;
289 g_hash_table_foreach(cpu->cp_regs, cpreg_make_keylist, &keys);
291 keys = g_list_sort(keys, cpreg_key_compare);
293 cpu->cpreg_array_len = 0;
295 g_list_foreach(keys, count_cpreg, cpu);
297 arraylen = cpu->cpreg_array_len;
298 cpu->cpreg_indexes = g_new(uint64_t, arraylen);
299 cpu->cpreg_values = g_new(uint64_t, arraylen);
300 cpu->cpreg_vmstate_indexes = g_new(uint64_t, arraylen);
301 cpu->cpreg_vmstate_values = g_new(uint64_t, arraylen);
302 cpu->cpreg_vmstate_array_len = cpu->cpreg_array_len;
303 cpu->cpreg_array_len = 0;
305 g_list_foreach(keys, add_cpreg_to_list, cpu);
307 assert(cpu->cpreg_array_len == arraylen);
309 g_list_free(keys);
312 static int dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
314 env->cp15.c3 = value;
315 tlb_flush(env, 1); /* Flush TLB as domain not tracked in TLB */
316 return 0;
319 static int fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
321 if (env->cp15.c13_fcse != value) {
322 /* Unlike real hardware the qemu TLB uses virtual addresses,
323 * not modified virtual addresses, so this causes a TLB flush.
325 tlb_flush(env, 1);
326 env->cp15.c13_fcse = value;
328 return 0;
330 static int contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri,
331 uint64_t value)
333 if (env->cp15.c13_context != value && !arm_feature(env, ARM_FEATURE_MPU)) {
334 /* For VMSA (when not using the LPAE long descriptor page table
335 * format) this register includes the ASID, so do a TLB flush.
336 * For PMSA it is purely a process ID and no action is needed.
338 tlb_flush(env, 1);
340 env->cp15.c13_context = value;
341 return 0;
344 static int tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri,
345 uint64_t value)
347 /* Invalidate all (TLBIALL) */
348 tlb_flush(env, 1);
349 return 0;
352 static int tlbimva_write(CPUARMState *env, const ARMCPRegInfo *ri,
353 uint64_t value)
355 /* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */
356 tlb_flush_page(env, value & TARGET_PAGE_MASK);
357 return 0;
360 static int tlbiasid_write(CPUARMState *env, const ARMCPRegInfo *ri,
361 uint64_t value)
363 /* Invalidate by ASID (TLBIASID) */
364 tlb_flush(env, value == 0);
365 return 0;
368 static int tlbimvaa_write(CPUARMState *env, const ARMCPRegInfo *ri,
369 uint64_t value)
371 /* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */
372 tlb_flush_page(env, value & TARGET_PAGE_MASK);
373 return 0;
376 static const ARMCPRegInfo cp_reginfo[] = {
377 /* DBGDIDR: just RAZ. In particular this means the "debug architecture
378 * version" bits will read as a reserved value, which should cause
379 * Linux to not try to use the debug hardware.
381 { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
382 .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
383 /* MMU Domain access control / MPU write buffer control */
384 { .name = "DACR", .cp = 15,
385 .crn = 3, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
386 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c3),
387 .resetvalue = 0, .writefn = dacr_write, .raw_writefn = raw_write, },
388 { .name = "FCSEIDR", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 0,
389 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c13_fcse),
390 .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, },
391 { .name = "CONTEXTIDR", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 1,
392 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c13_context),
393 .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, },
394 /* ??? This covers not just the impdef TLB lockdown registers but also
395 * some v7VMSA registers relating to TEX remap, so it is overly broad.
397 { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = CP_ANY,
398 .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
399 /* MMU TLB control. Note that the wildcarding means we cover not just
400 * the unified TLB ops but also the dside/iside/inner-shareable variants.
402 { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY,
403 .opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write,
404 .type = ARM_CP_NO_MIGRATE },
405 { .name = "TLBIMVA", .cp = 15, .crn = 8, .crm = CP_ANY,
406 .opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write,
407 .type = ARM_CP_NO_MIGRATE },
408 { .name = "TLBIASID", .cp = 15, .crn = 8, .crm = CP_ANY,
409 .opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write,
410 .type = ARM_CP_NO_MIGRATE },
411 { .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY,
412 .opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write,
413 .type = ARM_CP_NO_MIGRATE },
414 /* Cache maintenance ops; some of this space may be overridden later. */
415 { .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
416 .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
417 .type = ARM_CP_NOP | ARM_CP_OVERRIDE },
418 REGINFO_SENTINEL
421 static const ARMCPRegInfo not_v6_cp_reginfo[] = {
422 /* Not all pre-v6 cores implemented this WFI, so this is slightly
423 * over-broad.
425 { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2,
426 .access = PL1_W, .type = ARM_CP_WFI },
427 REGINFO_SENTINEL
430 static const ARMCPRegInfo not_v7_cp_reginfo[] = {
431 /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which
432 * is UNPREDICTABLE; we choose to NOP as most implementations do).
434 { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
435 .access = PL1_W, .type = ARM_CP_WFI },
436 /* L1 cache lockdown. Not architectural in v6 and earlier but in practice
437 * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and
438 * OMAPCP will override this space.
440 { .name = "DLOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 0,
441 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_data),
442 .resetvalue = 0 },
443 { .name = "ILOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 1,
444 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_insn),
445 .resetvalue = 0 },
446 /* v6 doesn't have the cache ID registers but Linux reads them anyway */
447 { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY,
448 .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
449 .resetvalue = 0 },
450 REGINFO_SENTINEL
453 static int cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
455 if (env->cp15.c1_coproc != value) {
456 env->cp15.c1_coproc = value;
457 /* ??? Is this safe when called from within a TB? */
458 tb_flush(env);
460 return 0;
463 static const ARMCPRegInfo v6_cp_reginfo[] = {
464 /* prefetch by MVA in v6, NOP in v7 */
465 { .name = "MVA_prefetch",
466 .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1,
467 .access = PL1_W, .type = ARM_CP_NOP },
468 { .name = "ISB", .cp = 15, .crn = 7, .crm = 5, .opc1 = 0, .opc2 = 4,
469 .access = PL0_W, .type = ARM_CP_NOP },
470 { .name = "DSB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 4,
471 .access = PL0_W, .type = ARM_CP_NOP },
472 { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5,
473 .access = PL0_W, .type = ARM_CP_NOP },
474 { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2,
475 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c6_insn),
476 .resetvalue = 0, },
477 /* Watchpoint Fault Address Register : should actually only be present
478 * for 1136, 1176, 11MPCore.
480 { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
481 .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, },
482 { .name = "CPACR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2,
483 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_coproc),
484 .resetvalue = 0, .writefn = cpacr_write },
485 REGINFO_SENTINEL
489 static int pmreg_read(CPUARMState *env, const ARMCPRegInfo *ri,
490 uint64_t *value)
492 /* Generic performance monitor register read function for where
493 * user access may be allowed by PMUSERENR.
495 if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
496 return EXCP_UDEF;
498 *value = CPREG_FIELD32(env, ri);
499 return 0;
502 static int pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
503 uint64_t value)
505 if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
506 return EXCP_UDEF;
508 /* only the DP, X, D and E bits are writable */
509 env->cp15.c9_pmcr &= ~0x39;
510 env->cp15.c9_pmcr |= (value & 0x39);
511 return 0;
514 static int pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
515 uint64_t value)
517 if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
518 return EXCP_UDEF;
520 value &= (1 << 31);
521 env->cp15.c9_pmcnten |= value;
522 return 0;
525 static int pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
526 uint64_t value)
528 if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
529 return EXCP_UDEF;
531 value &= (1 << 31);
532 env->cp15.c9_pmcnten &= ~value;
533 return 0;
536 static int pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
537 uint64_t value)
539 if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
540 return EXCP_UDEF;
542 env->cp15.c9_pmovsr &= ~value;
543 return 0;
546 static int pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
547 uint64_t value)
549 if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
550 return EXCP_UDEF;
552 env->cp15.c9_pmxevtyper = value & 0xff;
553 return 0;
556 static int pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
557 uint64_t value)
559 env->cp15.c9_pmuserenr = value & 1;
560 return 0;
563 static int pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
564 uint64_t value)
566 /* We have no event counters so only the C bit can be changed */
567 value &= (1 << 31);
568 env->cp15.c9_pminten |= value;
569 return 0;
572 static int pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
573 uint64_t value)
575 value &= (1 << 31);
576 env->cp15.c9_pminten &= ~value;
577 return 0;
580 static int vbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
581 uint64_t value)
583 env->cp15.c12_vbar = value & ~0x1Ful;
584 return 0;
587 static int ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri,
588 uint64_t *value)
590 ARMCPU *cpu = arm_env_get_cpu(env);
591 *value = cpu->ccsidr[env->cp15.c0_cssel];
592 return 0;
595 static int csselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
596 uint64_t value)
598 env->cp15.c0_cssel = value & 0xf;
599 return 0;
602 static const ARMCPRegInfo v7_cp_reginfo[] = {
603 /* DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
604 * debug components
606 { .name = "DBGDRAR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0,
607 .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
608 { .name = "DBGDSAR", .cp = 14, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
609 .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
610 /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */
611 { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
612 .access = PL1_W, .type = ARM_CP_NOP },
613 /* Performance monitors are implementation defined in v7,
614 * but with an ARM recommended set of registers, which we
615 * follow (although we don't actually implement any counters)
617 * Performance registers fall into three categories:
618 * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
619 * (b) RO in PL0 (ie UNDEF on write), RW in PL1 (PMUSERENR)
620 * (c) UNDEF in PL0 if PMUSERENR.EN==0, otherwise accessible (all others)
621 * For the cases controlled by PMUSERENR we must set .access to PL0_RW
622 * or PL0_RO as appropriate and then check PMUSERENR in the helper fn.
624 { .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 1,
625 .access = PL0_RW, .resetvalue = 0,
626 .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
627 .readfn = pmreg_read, .writefn = pmcntenset_write,
628 .raw_readfn = raw_read, .raw_writefn = raw_write },
629 { .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 2,
630 .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
631 .readfn = pmreg_read, .writefn = pmcntenclr_write,
632 .type = ARM_CP_NO_MIGRATE },
633 { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3,
634 .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
635 .readfn = pmreg_read, .writefn = pmovsr_write,
636 .raw_readfn = raw_read, .raw_writefn = raw_write },
637 /* Unimplemented so WI. Strictly speaking write accesses in PL0 should
638 * respect PMUSERENR.
640 { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
641 .access = PL0_W, .type = ARM_CP_NOP },
642 /* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
643 * We choose to RAZ/WI. XXX should respect PMUSERENR.
645 { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
646 .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
647 /* Unimplemented, RAZ/WI. XXX PMUSERENR */
648 { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
649 .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
650 { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1,
651 .access = PL0_RW,
652 .fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
653 .readfn = pmreg_read, .writefn = pmxevtyper_write,
654 .raw_readfn = raw_read, .raw_writefn = raw_write },
655 /* Unimplemented, RAZ/WI. XXX PMUSERENR */
656 { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
657 .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
658 { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
659 .access = PL0_R | PL1_RW,
660 .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
661 .resetvalue = 0,
662 .writefn = pmuserenr_write, .raw_writefn = raw_write },
663 { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
664 .access = PL1_RW,
665 .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
666 .resetvalue = 0,
667 .writefn = pmintenset_write, .raw_writefn = raw_write },
668 { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
669 .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
670 .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
671 .resetvalue = 0, .writefn = pmintenclr_write, },
672 { .name = "VBAR", .cp = 15, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
673 .access = PL1_RW, .writefn = vbar_write,
674 .fieldoffset = offsetof(CPUARMState, cp15.c12_vbar),
675 .resetvalue = 0 },
676 { .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
677 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_scr),
678 .resetvalue = 0, },
679 { .name = "CCSIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
680 .access = PL1_R, .readfn = ccsidr_read, .type = ARM_CP_NO_MIGRATE },
681 { .name = "CSSELR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0,
682 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c0_cssel),
683 .writefn = csselr_write, .resetvalue = 0 },
684 /* Auxiliary ID register: this actually has an IMPDEF value but for now
685 * just RAZ for all cores:
687 { .name = "AIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 7,
688 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
689 REGINFO_SENTINEL
692 static int teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
694 value &= 1;
695 env->teecr = value;
696 return 0;
699 static int teehbr_read(CPUARMState *env, const ARMCPRegInfo *ri,
700 uint64_t *value)
702 /* This is a helper function because the user access rights
703 * depend on the value of the TEECR.
705 if (arm_current_pl(env) == 0 && (env->teecr & 1)) {
706 return EXCP_UDEF;
708 *value = env->teehbr;
709 return 0;
712 static int teehbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
713 uint64_t value)
715 if (arm_current_pl(env) == 0 && (env->teecr & 1)) {
716 return EXCP_UDEF;
718 env->teehbr = value;
719 return 0;
722 static const ARMCPRegInfo t2ee_cp_reginfo[] = {
723 { .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0,
724 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr),
725 .resetvalue = 0,
726 .writefn = teecr_write },
727 { .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
728 .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr),
729 .resetvalue = 0, .raw_readfn = raw_read, .raw_writefn = raw_write,
730 .readfn = teehbr_read, .writefn = teehbr_write },
731 REGINFO_SENTINEL
734 static const ARMCPRegInfo v6k_cp_reginfo[] = {
735 { .name = "TPIDR_EL0", .state = ARM_CP_STATE_AA64,
736 .opc0 = 3, .opc1 = 3, .opc2 = 2, .crn = 13, .crm = 0,
737 .access = PL0_RW,
738 .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el0), .resetvalue = 0 },
739 { .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2,
740 .access = PL0_RW,
741 .fieldoffset = offsetoflow32(CPUARMState, cp15.tpidr_el0),
742 .resetfn = arm_cp_reset_ignore },
743 { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64,
744 .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0,
745 .access = PL0_R|PL1_W,
746 .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el0), .resetvalue = 0 },
747 { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3,
748 .access = PL0_R|PL1_W,
749 .fieldoffset = offsetoflow32(CPUARMState, cp15.tpidrro_el0),
750 .resetfn = arm_cp_reset_ignore },
751 { .name = "TPIDR_EL1", .state = ARM_CP_STATE_BOTH,
752 .opc0 = 3, .opc1 = 0, .opc2 = 4, .crn = 13, .crm = 0,
753 .access = PL1_RW,
754 .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el1), .resetvalue = 0 },
755 REGINFO_SENTINEL
758 #ifndef CONFIG_USER_ONLY
760 static uint64_t gt_get_countervalue(CPUARMState *env)
762 return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / GTIMER_SCALE;
765 static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
767 ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx];
769 if (gt->ctl & 1) {
770 /* Timer enabled: calculate and set current ISTATUS, irq, and
771 * reset timer to when ISTATUS next has to change
773 uint64_t count = gt_get_countervalue(&cpu->env);
774 /* Note that this must be unsigned 64 bit arithmetic: */
775 int istatus = count >= gt->cval;
776 uint64_t nexttick;
778 gt->ctl = deposit32(gt->ctl, 2, 1, istatus);
779 qemu_set_irq(cpu->gt_timer_outputs[timeridx],
780 (istatus && !(gt->ctl & 2)));
781 if (istatus) {
782 /* Next transition is when count rolls back over to zero */
783 nexttick = UINT64_MAX;
784 } else {
785 /* Next transition is when we hit cval */
786 nexttick = gt->cval;
788 /* Note that the desired next expiry time might be beyond the
789 * signed-64-bit range of a QEMUTimer -- in this case we just
790 * set the timer for as far in the future as possible. When the
791 * timer expires we will reset the timer for any remaining period.
793 if (nexttick > INT64_MAX / GTIMER_SCALE) {
794 nexttick = INT64_MAX / GTIMER_SCALE;
796 timer_mod(cpu->gt_timer[timeridx], nexttick);
797 } else {
798 /* Timer disabled: ISTATUS and timer output always clear */
799 gt->ctl &= ~4;
800 qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0);
801 timer_del(cpu->gt_timer[timeridx]);
805 static int gt_cntfrq_read(CPUARMState *env, const ARMCPRegInfo *ri,
806 uint64_t *value)
808 /* Not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero */
809 if (arm_current_pl(env) == 0 && !extract32(env->cp15.c14_cntkctl, 0, 2)) {
810 return EXCP_UDEF;
812 *value = env->cp15.c14_cntfrq;
813 return 0;
816 static void gt_cnt_reset(CPUARMState *env, const ARMCPRegInfo *ri)
818 ARMCPU *cpu = arm_env_get_cpu(env);
819 int timeridx = ri->opc1 & 1;
821 timer_del(cpu->gt_timer[timeridx]);
824 static int gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri,
825 uint64_t *value)
827 int timeridx = ri->opc1 & 1;
829 if (arm_current_pl(env) == 0 &&
830 !extract32(env->cp15.c14_cntkctl, timeridx, 1)) {
831 return EXCP_UDEF;
833 *value = gt_get_countervalue(env);
834 return 0;
837 static int gt_cval_read(CPUARMState *env, const ARMCPRegInfo *ri,
838 uint64_t *value)
840 int timeridx = ri->opc1 & 1;
842 if (arm_current_pl(env) == 0 &&
843 !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
844 return EXCP_UDEF;
846 *value = env->cp15.c14_timer[timeridx].cval;
847 return 0;
850 static int gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
851 uint64_t value)
853 int timeridx = ri->opc1 & 1;
855 env->cp15.c14_timer[timeridx].cval = value;
856 gt_recalc_timer(arm_env_get_cpu(env), timeridx);
857 return 0;
859 static int gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri,
860 uint64_t *value)
862 int timeridx = ri->crm & 1;
864 if (arm_current_pl(env) == 0 &&
865 !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
866 return EXCP_UDEF;
868 *value = (uint32_t)(env->cp15.c14_timer[timeridx].cval -
869 gt_get_countervalue(env));
870 return 0;
873 static int gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
874 uint64_t value)
876 int timeridx = ri->crm & 1;
878 env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) +
879 + sextract64(value, 0, 32);
880 gt_recalc_timer(arm_env_get_cpu(env), timeridx);
881 return 0;
884 static int gt_ctl_read(CPUARMState *env, const ARMCPRegInfo *ri,
885 uint64_t *value)
887 int timeridx = ri->crm & 1;
889 if (arm_current_pl(env) == 0 &&
890 !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
891 return EXCP_UDEF;
893 *value = env->cp15.c14_timer[timeridx].ctl;
894 return 0;
897 static int gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
898 uint64_t value)
900 ARMCPU *cpu = arm_env_get_cpu(env);
901 int timeridx = ri->crm & 1;
902 uint32_t oldval = env->cp15.c14_timer[timeridx].ctl;
904 env->cp15.c14_timer[timeridx].ctl = value & 3;
905 if ((oldval ^ value) & 1) {
906 /* Enable toggled */
907 gt_recalc_timer(cpu, timeridx);
908 } else if ((oldval & value) & 2) {
909 /* IMASK toggled: don't need to recalculate,
910 * just set the interrupt line based on ISTATUS
912 qemu_set_irq(cpu->gt_timer_outputs[timeridx],
913 (oldval & 4) && (value & 2));
915 return 0;
918 void arm_gt_ptimer_cb(void *opaque)
920 ARMCPU *cpu = opaque;
922 gt_recalc_timer(cpu, GTIMER_PHYS);
925 void arm_gt_vtimer_cb(void *opaque)
927 ARMCPU *cpu = opaque;
929 gt_recalc_timer(cpu, GTIMER_VIRT);
932 static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
933 /* Note that CNTFRQ is purely reads-as-written for the benefit
934 * of software; writing it doesn't actually change the timer frequency.
935 * Our reset value matches the fixed frequency we implement the timer at.
937 { .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0,
938 .access = PL1_RW | PL0_R,
939 .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq),
940 .resetvalue = (1000 * 1000 * 1000) / GTIMER_SCALE,
941 .readfn = gt_cntfrq_read, .raw_readfn = raw_read,
943 /* overall control: mostly access permissions */
944 { .name = "CNTKCTL", .cp = 15, .crn = 14, .crm = 1, .opc1 = 0, .opc2 = 0,
945 .access = PL1_RW,
946 .fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl),
947 .resetvalue = 0,
949 /* per-timer control */
950 { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
951 .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
952 .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl),
953 .resetvalue = 0,
954 .readfn = gt_ctl_read, .writefn = gt_ctl_write,
955 .raw_readfn = raw_read, .raw_writefn = raw_write,
957 { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1,
958 .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
959 .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl),
960 .resetvalue = 0,
961 .readfn = gt_ctl_read, .writefn = gt_ctl_write,
962 .raw_readfn = raw_read, .raw_writefn = raw_write,
964 /* TimerValue views: a 32 bit downcounting view of the underlying state */
965 { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
966 .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R,
967 .readfn = gt_tval_read, .writefn = gt_tval_write,
969 { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0,
970 .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R,
971 .readfn = gt_tval_read, .writefn = gt_tval_write,
973 /* The counter itself */
974 { .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0,
975 .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO,
976 .readfn = gt_cnt_read, .resetfn = gt_cnt_reset,
978 { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1,
979 .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO,
980 .readfn = gt_cnt_read, .resetfn = gt_cnt_reset,
982 /* Comparison value, indicating when the timer goes off */
983 { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
984 .access = PL1_RW | PL0_R,
985 .type = ARM_CP_64BIT | ARM_CP_IO,
986 .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
987 .resetvalue = 0,
988 .readfn = gt_cval_read, .writefn = gt_cval_write,
989 .raw_readfn = raw_read, .raw_writefn = raw_write,
991 { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3,
992 .access = PL1_RW | PL0_R,
993 .type = ARM_CP_64BIT | ARM_CP_IO,
994 .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
995 .resetvalue = 0,
996 .readfn = gt_cval_read, .writefn = gt_cval_write,
997 .raw_readfn = raw_read, .raw_writefn = raw_write,
999 REGINFO_SENTINEL
1002 #else
1003 /* In user-mode none of the generic timer registers are accessible,
1004 * and their implementation depends on QEMU_CLOCK_VIRTUAL and qdev gpio outputs,
1005 * so instead just don't register any of them.
1007 static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
1008 REGINFO_SENTINEL
1011 #endif
1013 static int par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
1015 if (arm_feature(env, ARM_FEATURE_LPAE)) {
1016 env->cp15.c7_par = value;
1017 } else if (arm_feature(env, ARM_FEATURE_V7)) {
1018 env->cp15.c7_par = value & 0xfffff6ff;
1019 } else {
1020 env->cp15.c7_par = value & 0xfffff1ff;
1022 return 0;
1025 #ifndef CONFIG_USER_ONLY
1026 /* get_phys_addr() isn't present for user-mode-only targets */
1028 /* Return true if extended addresses are enabled, ie this is an
1029 * LPAE implementation and we are using the long-descriptor translation
1030 * table format because the TTBCR EAE bit is set.
1032 static inline bool extended_addresses_enabled(CPUARMState *env)
1034 return arm_feature(env, ARM_FEATURE_LPAE)
1035 && (env->cp15.c2_control & (1U << 31));
1038 static int ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
1040 hwaddr phys_addr;
1041 target_ulong page_size;
1042 int prot;
1043 int ret, is_user = ri->opc2 & 2;
1044 int access_type = ri->opc2 & 1;
1046 if (ri->opc2 & 4) {
1047 /* Other states are only available with TrustZone */
1048 return EXCP_UDEF;
1050 ret = get_phys_addr(env, value, access_type, is_user,
1051 &phys_addr, &prot, &page_size);
1052 if (extended_addresses_enabled(env)) {
1053 /* ret is a DFSR/IFSR value for the long descriptor
1054 * translation table format, but with WnR always clear.
1055 * Convert it to a 64-bit PAR.
1057 uint64_t par64 = (1 << 11); /* LPAE bit always set */
1058 if (ret == 0) {
1059 par64 |= phys_addr & ~0xfffULL;
1060 /* We don't set the ATTR or SH fields in the PAR. */
1061 } else {
1062 par64 |= 1; /* F */
1063 par64 |= (ret & 0x3f) << 1; /* FS */
1064 /* Note that S2WLK and FSTAGE are always zero, because we don't
1065 * implement virtualization and therefore there can't be a stage 2
1066 * fault.
1069 env->cp15.c7_par = par64;
1070 env->cp15.c7_par_hi = par64 >> 32;
1071 } else {
1072 /* ret is a DFSR/IFSR value for the short descriptor
1073 * translation table format (with WnR always clear).
1074 * Convert it to a 32-bit PAR.
1076 if (ret == 0) {
1077 /* We do not set any attribute bits in the PAR */
1078 if (page_size == (1 << 24)
1079 && arm_feature(env, ARM_FEATURE_V7)) {
1080 env->cp15.c7_par = (phys_addr & 0xff000000) | 1 << 1;
1081 } else {
1082 env->cp15.c7_par = phys_addr & 0xfffff000;
1084 } else {
1085 env->cp15.c7_par = ((ret & (10 << 1)) >> 5) |
1086 ((ret & (12 << 1)) >> 6) |
1087 ((ret & 0xf) << 1) | 1;
1089 env->cp15.c7_par_hi = 0;
1091 return 0;
1093 #endif
1095 static const ARMCPRegInfo vapa_cp_reginfo[] = {
1096 { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0,
1097 .access = PL1_RW, .resetvalue = 0,
1098 .fieldoffset = offsetof(CPUARMState, cp15.c7_par),
1099 .writefn = par_write },
1100 #ifndef CONFIG_USER_ONLY
1101 { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
1102 .access = PL1_W, .writefn = ats_write, .type = ARM_CP_NO_MIGRATE },
1103 #endif
1104 REGINFO_SENTINEL
1107 /* Return basic MPU access permission bits. */
1108 static uint32_t simple_mpu_ap_bits(uint32_t val)
1110 uint32_t ret;
1111 uint32_t mask;
1112 int i;
1113 ret = 0;
1114 mask = 3;
1115 for (i = 0; i < 16; i += 2) {
1116 ret |= (val >> i) & mask;
1117 mask <<= 2;
1119 return ret;
1122 /* Pad basic MPU access permission bits to extended format. */
1123 static uint32_t extended_mpu_ap_bits(uint32_t val)
1125 uint32_t ret;
1126 uint32_t mask;
1127 int i;
1128 ret = 0;
1129 mask = 3;
1130 for (i = 0; i < 16; i += 2) {
1131 ret |= (val & mask) << i;
1132 mask <<= 2;
1134 return ret;
1137 static int pmsav5_data_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
1138 uint64_t value)
1140 env->cp15.c5_data = extended_mpu_ap_bits(value);
1141 return 0;
1144 static int pmsav5_data_ap_read(CPUARMState *env, const ARMCPRegInfo *ri,
1145 uint64_t *value)
1147 *value = simple_mpu_ap_bits(env->cp15.c5_data);
1148 return 0;
1151 static int pmsav5_insn_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
1152 uint64_t value)
1154 env->cp15.c5_insn = extended_mpu_ap_bits(value);
1155 return 0;
1158 static int pmsav5_insn_ap_read(CPUARMState *env, const ARMCPRegInfo *ri,
1159 uint64_t *value)
1161 *value = simple_mpu_ap_bits(env->cp15.c5_insn);
1162 return 0;
1165 static int arm946_prbs_read(CPUARMState *env, const ARMCPRegInfo *ri,
1166 uint64_t *value)
1168 if (ri->crm >= 8) {
1169 return EXCP_UDEF;
1171 *value = env->cp15.c6_region[ri->crm];
1172 return 0;
1175 static int arm946_prbs_write(CPUARMState *env, const ARMCPRegInfo *ri,
1176 uint64_t value)
1178 if (ri->crm >= 8) {
1179 return EXCP_UDEF;
1181 env->cp15.c6_region[ri->crm] = value;
1182 return 0;
1185 static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
1186 { .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
1187 .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
1188 .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0,
1189 .readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, },
1190 { .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
1191 .access = PL1_RW, .type = ARM_CP_NO_MIGRATE,
1192 .fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0,
1193 .readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, },
1194 { .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 2,
1195 .access = PL1_RW,
1196 .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0, },
1197 { .name = "INSN_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 3,
1198 .access = PL1_RW,
1199 .fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0, },
1200 { .name = "DCACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
1201 .access = PL1_RW,
1202 .fieldoffset = offsetof(CPUARMState, cp15.c2_data), .resetvalue = 0, },
1203 { .name = "ICACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
1204 .access = PL1_RW,
1205 .fieldoffset = offsetof(CPUARMState, cp15.c2_insn), .resetvalue = 0, },
1206 /* Protection region base and size registers */
1207 { .name = "946_PRBS", .cp = 15, .crn = 6, .crm = CP_ANY, .opc1 = 0,
1208 .opc2 = CP_ANY, .access = PL1_RW,
1209 .readfn = arm946_prbs_read, .writefn = arm946_prbs_write, },
1210 REGINFO_SENTINEL
1213 static int vmsa_ttbcr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
1214 uint64_t value)
1216 int maskshift = extract32(value, 0, 3);
1218 if (arm_feature(env, ARM_FEATURE_LPAE) && (value & (1 << 31))) {
1219 value &= ~((7 << 19) | (3 << 14) | (0xf << 3));
1220 } else {
1221 value &= 7;
1223 /* Note that we always calculate c2_mask and c2_base_mask, but
1224 * they are only used for short-descriptor tables (ie if EAE is 0);
1225 * for long-descriptor tables the TTBCR fields are used differently
1226 * and the c2_mask and c2_base_mask values are meaningless.
1228 env->cp15.c2_control = value;
1229 env->cp15.c2_mask = ~(((uint32_t)0xffffffffu) >> maskshift);
1230 env->cp15.c2_base_mask = ~((uint32_t)0x3fffu >> maskshift);
1231 return 0;
1234 static int vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
1235 uint64_t value)
1237 if (arm_feature(env, ARM_FEATURE_LPAE)) {
1238 /* With LPAE the TTBCR could result in a change of ASID
1239 * via the TTBCR.A1 bit, so do a TLB flush.
1241 tlb_flush(env, 1);
1243 return vmsa_ttbcr_raw_write(env, ri, value);
1246 static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
1248 env->cp15.c2_base_mask = 0xffffc000u;
1249 env->cp15.c2_control = 0;
1250 env->cp15.c2_mask = 0;
1253 static const ARMCPRegInfo vmsa_cp_reginfo[] = {
1254 { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
1255 .access = PL1_RW,
1256 .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0, },
1257 { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
1258 .access = PL1_RW,
1259 .fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0, },
1260 { .name = "TTBR0", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
1261 .access = PL1_RW,
1262 .fieldoffset = offsetof(CPUARMState, cp15.c2_base0), .resetvalue = 0, },
1263 { .name = "TTBR1", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
1264 .access = PL1_RW,
1265 .fieldoffset = offsetof(CPUARMState, cp15.c2_base1), .resetvalue = 0, },
1266 { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
1267 .access = PL1_RW, .writefn = vmsa_ttbcr_write,
1268 .resetfn = vmsa_ttbcr_reset, .raw_writefn = vmsa_ttbcr_raw_write,
1269 .fieldoffset = offsetof(CPUARMState, cp15.c2_control) },
1270 { .name = "DFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
1271 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c6_data),
1272 .resetvalue = 0, },
1273 REGINFO_SENTINEL
1276 static int omap_ticonfig_write(CPUARMState *env, const ARMCPRegInfo *ri,
1277 uint64_t value)
1279 env->cp15.c15_ticonfig = value & 0xe7;
1280 /* The OS_TYPE bit in this register changes the reported CPUID! */
1281 env->cp15.c0_cpuid = (value & (1 << 5)) ?
1282 ARM_CPUID_TI915T : ARM_CPUID_TI925T;
1283 return 0;
1286 static int omap_threadid_write(CPUARMState *env, const ARMCPRegInfo *ri,
1287 uint64_t value)
1289 env->cp15.c15_threadid = value & 0xffff;
1290 return 0;
1293 static int omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri,
1294 uint64_t value)
1296 /* Wait-for-interrupt (deprecated) */
1297 cpu_interrupt(CPU(arm_env_get_cpu(env)), CPU_INTERRUPT_HALT);
1298 return 0;
1301 static int omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri,
1302 uint64_t value)
1304 /* On OMAP there are registers indicating the max/min index of dcache lines
1305 * containing a dirty line; cache flush operations have to reset these.
1307 env->cp15.c15_i_max = 0x000;
1308 env->cp15.c15_i_min = 0xff0;
1309 return 0;
1312 static const ARMCPRegInfo omap_cp_reginfo[] = {
1313 { .name = "DFSR", .cp = 15, .crn = 5, .crm = CP_ANY,
1314 .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_OVERRIDE,
1315 .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0, },
1316 { .name = "", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0,
1317 .access = PL1_RW, .type = ARM_CP_NOP },
1318 { .name = "TICONFIG", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0,
1319 .access = PL1_RW,
1320 .fieldoffset = offsetof(CPUARMState, cp15.c15_ticonfig), .resetvalue = 0,
1321 .writefn = omap_ticonfig_write },
1322 { .name = "IMAX", .cp = 15, .crn = 15, .crm = 2, .opc1 = 0, .opc2 = 0,
1323 .access = PL1_RW,
1324 .fieldoffset = offsetof(CPUARMState, cp15.c15_i_max), .resetvalue = 0, },
1325 { .name = "IMIN", .cp = 15, .crn = 15, .crm = 3, .opc1 = 0, .opc2 = 0,
1326 .access = PL1_RW, .resetvalue = 0xff0,
1327 .fieldoffset = offsetof(CPUARMState, cp15.c15_i_min) },
1328 { .name = "THREADID", .cp = 15, .crn = 15, .crm = 4, .opc1 = 0, .opc2 = 0,
1329 .access = PL1_RW,
1330 .fieldoffset = offsetof(CPUARMState, cp15.c15_threadid), .resetvalue = 0,
1331 .writefn = omap_threadid_write },
1332 { .name = "TI925T_STATUS", .cp = 15, .crn = 15,
1333 .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
1334 .type = ARM_CP_NO_MIGRATE,
1335 .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, },
1336 /* TODO: Peripheral port remap register:
1337 * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller
1338 * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff),
1339 * when MMU is off.
1341 { .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
1342 .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
1343 .type = ARM_CP_OVERRIDE | ARM_CP_NO_MIGRATE,
1344 .writefn = omap_cachemaint_write },
1345 { .name = "C9", .cp = 15, .crn = 9,
1346 .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW,
1347 .type = ARM_CP_CONST | ARM_CP_OVERRIDE, .resetvalue = 0 },
1348 REGINFO_SENTINEL
1351 static int xscale_cpar_write(CPUARMState *env, const ARMCPRegInfo *ri,
1352 uint64_t value)
1354 value &= 0x3fff;
1355 if (env->cp15.c15_cpar != value) {
1356 /* Changes cp0 to cp13 behavior, so needs a TB flush. */
1357 tb_flush(env);
1358 env->cp15.c15_cpar = value;
1360 return 0;
1363 static const ARMCPRegInfo xscale_cp_reginfo[] = {
1364 { .name = "XSCALE_CPAR",
1365 .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
1366 .fieldoffset = offsetof(CPUARMState, cp15.c15_cpar), .resetvalue = 0,
1367 .writefn = xscale_cpar_write, },
1368 { .name = "XSCALE_AUXCR",
1369 .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW,
1370 .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr),
1371 .resetvalue = 0, },
1372 REGINFO_SENTINEL
1375 static const ARMCPRegInfo dummy_c15_cp_reginfo[] = {
1376 /* RAZ/WI the whole crn=15 space, when we don't have a more specific
1377 * implementation of this implementation-defined space.
1378 * Ideally this should eventually disappear in favour of actually
1379 * implementing the correct behaviour for all cores.
1381 { .name = "C15_IMPDEF", .cp = 15, .crn = 15,
1382 .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
1383 .access = PL1_RW,
1384 .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE | ARM_CP_OVERRIDE,
1385 .resetvalue = 0 },
1386 REGINFO_SENTINEL
1389 static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = {
1390 /* Cache status: RAZ because we have no cache so it's always clean */
1391 { .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6,
1392 .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
1393 .resetvalue = 0 },
1394 REGINFO_SENTINEL
1397 static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
1398 /* We never have a a block transfer operation in progress */
1399 { .name = "BXSR", .cp = 15, .crn = 7, .crm = 12, .opc1 = 0, .opc2 = 4,
1400 .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
1401 .resetvalue = 0 },
1402 /* The cache ops themselves: these all NOP for QEMU */
1403 { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0,
1404 .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
1405 { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0,
1406 .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
1407 { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0,
1408 .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
1409 { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1,
1410 .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
1411 { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2,
1412 .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
1413 { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0,
1414 .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
1415 REGINFO_SENTINEL
1418 static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
1419 /* The cache test-and-clean instructions always return (1 << 30)
1420 * to indicate that there are no dirty cache lines.
1422 { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3,
1423 .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
1424 .resetvalue = (1 << 30) },
1425 { .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 = 3,
1426 .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
1427 .resetvalue = (1 << 30) },
1428 REGINFO_SENTINEL
1431 static const ARMCPRegInfo strongarm_cp_reginfo[] = {
1432 /* Ignore ReadBuffer accesses */
1433 { .name = "C9_READBUFFER", .cp = 15, .crn = 9,
1434 .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
1435 .access = PL1_RW, .resetvalue = 0,
1436 .type = ARM_CP_CONST | ARM_CP_OVERRIDE | ARM_CP_NO_MIGRATE },
1437 REGINFO_SENTINEL
1440 static int mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri,
1441 uint64_t *value)
1443 CPUState *cs = CPU(arm_env_get_cpu(env));
1444 uint32_t mpidr = cs->cpu_index;
1445 /* We don't support setting cluster ID ([8..11])
1446 * so these bits always RAZ.
1448 if (arm_feature(env, ARM_FEATURE_V7MP)) {
1449 mpidr |= (1U << 31);
1450 /* Cores which are uniprocessor (non-coherent)
1451 * but still implement the MP extensions set
1452 * bit 30. (For instance, A9UP.) However we do
1453 * not currently model any of those cores.
1456 *value = mpidr;
1457 return 0;
1460 static const ARMCPRegInfo mpidr_cp_reginfo[] = {
1461 { .name = "MPIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5,
1462 .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_MIGRATE },
1463 REGINFO_SENTINEL
1466 static int par64_read(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value)
1468 *value = ((uint64_t)env->cp15.c7_par_hi << 32) | env->cp15.c7_par;
1469 return 0;
1472 static int par64_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
1474 env->cp15.c7_par_hi = value >> 32;
1475 env->cp15.c7_par = value;
1476 return 0;
1479 static void par64_reset(CPUARMState *env, const ARMCPRegInfo *ri)
1481 env->cp15.c7_par_hi = 0;
1482 env->cp15.c7_par = 0;
1485 static int ttbr064_read(CPUARMState *env, const ARMCPRegInfo *ri,
1486 uint64_t *value)
1488 *value = ((uint64_t)env->cp15.c2_base0_hi << 32) | env->cp15.c2_base0;
1489 return 0;
1492 static int ttbr064_raw_write(CPUARMState *env, const ARMCPRegInfo *ri,
1493 uint64_t value)
1495 env->cp15.c2_base0_hi = value >> 32;
1496 env->cp15.c2_base0 = value;
1497 return 0;
1500 static int ttbr064_write(CPUARMState *env, const ARMCPRegInfo *ri,
1501 uint64_t value)
1503 /* Writes to the 64 bit format TTBRs may change the ASID */
1504 tlb_flush(env, 1);
1505 return ttbr064_raw_write(env, ri, value);
1508 static void ttbr064_reset(CPUARMState *env, const ARMCPRegInfo *ri)
1510 env->cp15.c2_base0_hi = 0;
1511 env->cp15.c2_base0 = 0;
1514 static int ttbr164_read(CPUARMState *env, const ARMCPRegInfo *ri,
1515 uint64_t *value)
1517 *value = ((uint64_t)env->cp15.c2_base1_hi << 32) | env->cp15.c2_base1;
1518 return 0;
1521 static int ttbr164_write(CPUARMState *env, const ARMCPRegInfo *ri,
1522 uint64_t value)
1524 env->cp15.c2_base1_hi = value >> 32;
1525 env->cp15.c2_base1 = value;
1526 return 0;
1529 static void ttbr164_reset(CPUARMState *env, const ARMCPRegInfo *ri)
1531 env->cp15.c2_base1_hi = 0;
1532 env->cp15.c2_base1 = 0;
1535 static const ARMCPRegInfo lpae_cp_reginfo[] = {
1536 /* NOP AMAIR0/1: the override is because these clash with the rather
1537 * broadly specified TLB_LOCKDOWN entry in the generic cp_reginfo.
1539 { .name = "AMAIR0", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0,
1540 .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE,
1541 .resetvalue = 0 },
1542 { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1,
1543 .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE,
1544 .resetvalue = 0 },
1545 /* 64 bit access versions of the (dummy) debug registers */
1546 { .name = "DBGDRAR", .cp = 14, .crm = 1, .opc1 = 0,
1547 .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
1548 { .name = "DBGDSAR", .cp = 14, .crm = 2, .opc1 = 0,
1549 .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
1550 { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0,
1551 .access = PL1_RW, .type = ARM_CP_64BIT,
1552 .readfn = par64_read, .writefn = par64_write, .resetfn = par64_reset },
1553 { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
1554 .access = PL1_RW, .type = ARM_CP_64BIT, .readfn = ttbr064_read,
1555 .writefn = ttbr064_write, .raw_writefn = ttbr064_raw_write,
1556 .resetfn = ttbr064_reset },
1557 { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
1558 .access = PL1_RW, .type = ARM_CP_64BIT, .readfn = ttbr164_read,
1559 .writefn = ttbr164_write, .resetfn = ttbr164_reset },
1560 REGINFO_SENTINEL
1563 static int aa64_fpcr_read(CPUARMState *env, const ARMCPRegInfo *ri,
1564 uint64_t *value)
1566 *value = vfp_get_fpcr(env);
1567 return 0;
1570 static int aa64_fpcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
1571 uint64_t value)
1573 vfp_set_fpcr(env, value);
1574 return 0;
1577 static int aa64_fpsr_read(CPUARMState *env, const ARMCPRegInfo *ri,
1578 uint64_t *value)
1580 *value = vfp_get_fpsr(env);
1581 return 0;
1584 static int aa64_fpsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
1585 uint64_t value)
1587 vfp_set_fpsr(env, value);
1588 return 0;
1591 static const ARMCPRegInfo v8_cp_reginfo[] = {
1592 /* Minimal set of EL0-visible registers. This will need to be expanded
1593 * significantly for system emulation of AArch64 CPUs.
1595 { .name = "NZCV", .state = ARM_CP_STATE_AA64,
1596 .opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 2,
1597 .access = PL0_RW, .type = ARM_CP_NZCV },
1598 { .name = "FPCR", .state = ARM_CP_STATE_AA64,
1599 .opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 4,
1600 .access = PL0_RW, .readfn = aa64_fpcr_read, .writefn = aa64_fpcr_write },
1601 { .name = "FPSR", .state = ARM_CP_STATE_AA64,
1602 .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 4,
1603 .access = PL0_RW, .readfn = aa64_fpsr_read, .writefn = aa64_fpsr_write },
1604 /* This claims a 32 byte cacheline size for icache and dcache, VIPT icache.
1605 * It will eventually need to have a CPU-specified reset value.
1607 { .name = "CTR_EL0", .state = ARM_CP_STATE_AA64,
1608 .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 0, .crm = 0,
1609 .access = PL0_R, .type = ARM_CP_CONST,
1610 .resetvalue = 0x80030003 },
1611 /* Prohibit use of DC ZVA. OPTME: implement DC ZVA and allow its use.
1612 * For system mode the DZP bit here will need to be computed, not constant.
1614 { .name = "DCZID_EL0", .state = ARM_CP_STATE_AA64,
1615 .opc0 = 3, .opc1 = 3, .opc2 = 7, .crn = 0, .crm = 0,
1616 .access = PL0_R, .type = ARM_CP_CONST,
1617 .resetvalue = 0x10 },
1618 REGINFO_SENTINEL
1621 static int sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
1623 env->cp15.c1_sys = value;
1624 /* ??? Lots of these bits are not implemented. */
1625 /* This may enable/disable the MMU, so do a TLB flush. */
1626 tlb_flush(env, 1);
1627 return 0;
1630 void register_cp_regs_for_features(ARMCPU *cpu)
1632 /* Register all the coprocessor registers based on feature bits */
1633 CPUARMState *env = &cpu->env;
1634 if (arm_feature(env, ARM_FEATURE_M)) {
1635 /* M profile has no coprocessor registers */
1636 return;
1639 define_arm_cp_regs(cpu, cp_reginfo);
1640 if (arm_feature(env, ARM_FEATURE_V6)) {
1641 /* The ID registers all have impdef reset values */
1642 ARMCPRegInfo v6_idregs[] = {
1643 { .name = "ID_PFR0", .cp = 15, .crn = 0, .crm = 1,
1644 .opc1 = 0, .opc2 = 0, .access = PL1_R, .type = ARM_CP_CONST,
1645 .resetvalue = cpu->id_pfr0 },
1646 { .name = "ID_PFR1", .cp = 15, .crn = 0, .crm = 1,
1647 .opc1 = 0, .opc2 = 1, .access = PL1_R, .type = ARM_CP_CONST,
1648 .resetvalue = cpu->id_pfr1 },
1649 { .name = "ID_DFR0", .cp = 15, .crn = 0, .crm = 1,
1650 .opc1 = 0, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST,
1651 .resetvalue = cpu->id_dfr0 },
1652 { .name = "ID_AFR0", .cp = 15, .crn = 0, .crm = 1,
1653 .opc1 = 0, .opc2 = 3, .access = PL1_R, .type = ARM_CP_CONST,
1654 .resetvalue = cpu->id_afr0 },
1655 { .name = "ID_MMFR0", .cp = 15, .crn = 0, .crm = 1,
1656 .opc1 = 0, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST,
1657 .resetvalue = cpu->id_mmfr0 },
1658 { .name = "ID_MMFR1", .cp = 15, .crn = 0, .crm = 1,
1659 .opc1 = 0, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST,
1660 .resetvalue = cpu->id_mmfr1 },
1661 { .name = "ID_MMFR2", .cp = 15, .crn = 0, .crm = 1,
1662 .opc1 = 0, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST,
1663 .resetvalue = cpu->id_mmfr2 },
1664 { .name = "ID_MMFR3", .cp = 15, .crn = 0, .crm = 1,
1665 .opc1 = 0, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST,
1666 .resetvalue = cpu->id_mmfr3 },
1667 { .name = "ID_ISAR0", .cp = 15, .crn = 0, .crm = 2,
1668 .opc1 = 0, .opc2 = 0, .access = PL1_R, .type = ARM_CP_CONST,
1669 .resetvalue = cpu->id_isar0 },
1670 { .name = "ID_ISAR1", .cp = 15, .crn = 0, .crm = 2,
1671 .opc1 = 0, .opc2 = 1, .access = PL1_R, .type = ARM_CP_CONST,
1672 .resetvalue = cpu->id_isar1 },
1673 { .name = "ID_ISAR2", .cp = 15, .crn = 0, .crm = 2,
1674 .opc1 = 0, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST,
1675 .resetvalue = cpu->id_isar2 },
1676 { .name = "ID_ISAR3", .cp = 15, .crn = 0, .crm = 2,
1677 .opc1 = 0, .opc2 = 3, .access = PL1_R, .type = ARM_CP_CONST,
1678 .resetvalue = cpu->id_isar3 },
1679 { .name = "ID_ISAR4", .cp = 15, .crn = 0, .crm = 2,
1680 .opc1 = 0, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST,
1681 .resetvalue = cpu->id_isar4 },
1682 { .name = "ID_ISAR5", .cp = 15, .crn = 0, .crm = 2,
1683 .opc1 = 0, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST,
1684 .resetvalue = cpu->id_isar5 },
1685 /* 6..7 are as yet unallocated and must RAZ */
1686 { .name = "ID_ISAR6", .cp = 15, .crn = 0, .crm = 2,
1687 .opc1 = 0, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST,
1688 .resetvalue = 0 },
1689 { .name = "ID_ISAR7", .cp = 15, .crn = 0, .crm = 2,
1690 .opc1 = 0, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST,
1691 .resetvalue = 0 },
1692 REGINFO_SENTINEL
1694 define_arm_cp_regs(cpu, v6_idregs);
1695 define_arm_cp_regs(cpu, v6_cp_reginfo);
1696 } else {
1697 define_arm_cp_regs(cpu, not_v6_cp_reginfo);
1699 if (arm_feature(env, ARM_FEATURE_V6K)) {
1700 define_arm_cp_regs(cpu, v6k_cp_reginfo);
1702 if (arm_feature(env, ARM_FEATURE_V7)) {
1703 /* v7 performance monitor control register: same implementor
1704 * field as main ID register, and we implement no event counters.
1706 ARMCPRegInfo pmcr = {
1707 .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
1708 .access = PL0_RW, .resetvalue = cpu->midr & 0xff000000,
1709 .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
1710 .readfn = pmreg_read, .writefn = pmcr_write,
1711 .raw_readfn = raw_read, .raw_writefn = raw_write,
1713 ARMCPRegInfo clidr = {
1714 .name = "CLIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
1715 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->clidr
1717 define_one_arm_cp_reg(cpu, &pmcr);
1718 define_one_arm_cp_reg(cpu, &clidr);
1719 define_arm_cp_regs(cpu, v7_cp_reginfo);
1720 } else {
1721 define_arm_cp_regs(cpu, not_v7_cp_reginfo);
1723 if (arm_feature(env, ARM_FEATURE_V8)) {
1724 define_arm_cp_regs(cpu, v8_cp_reginfo);
1726 if (arm_feature(env, ARM_FEATURE_MPU)) {
1727 /* These are the MPU registers prior to PMSAv6. Any new
1728 * PMSA core later than the ARM946 will require that we
1729 * implement the PMSAv6 or PMSAv7 registers, which are
1730 * completely different.
1732 assert(!arm_feature(env, ARM_FEATURE_V6));
1733 define_arm_cp_regs(cpu, pmsav5_cp_reginfo);
1734 } else {
1735 define_arm_cp_regs(cpu, vmsa_cp_reginfo);
1737 if (arm_feature(env, ARM_FEATURE_THUMB2EE)) {
1738 define_arm_cp_regs(cpu, t2ee_cp_reginfo);
1740 if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) {
1741 define_arm_cp_regs(cpu, generic_timer_cp_reginfo);
1743 if (arm_feature(env, ARM_FEATURE_VAPA)) {
1744 define_arm_cp_regs(cpu, vapa_cp_reginfo);
1746 if (arm_feature(env, ARM_FEATURE_CACHE_TEST_CLEAN)) {
1747 define_arm_cp_regs(cpu, cache_test_clean_cp_reginfo);
1749 if (arm_feature(env, ARM_FEATURE_CACHE_DIRTY_REG)) {
1750 define_arm_cp_regs(cpu, cache_dirty_status_cp_reginfo);
1752 if (arm_feature(env, ARM_FEATURE_CACHE_BLOCK_OPS)) {
1753 define_arm_cp_regs(cpu, cache_block_ops_cp_reginfo);
1755 if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
1756 define_arm_cp_regs(cpu, omap_cp_reginfo);
1758 if (arm_feature(env, ARM_FEATURE_STRONGARM)) {
1759 define_arm_cp_regs(cpu, strongarm_cp_reginfo);
1761 if (arm_feature(env, ARM_FEATURE_XSCALE)) {
1762 define_arm_cp_regs(cpu, xscale_cp_reginfo);
1764 if (arm_feature(env, ARM_FEATURE_DUMMY_C15_REGS)) {
1765 define_arm_cp_regs(cpu, dummy_c15_cp_reginfo);
1767 if (arm_feature(env, ARM_FEATURE_LPAE)) {
1768 define_arm_cp_regs(cpu, lpae_cp_reginfo);
1770 /* Slightly awkwardly, the OMAP and StrongARM cores need all of
1771 * cp15 crn=0 to be writes-ignored, whereas for other cores they should
1772 * be read-only (ie write causes UNDEF exception).
1775 ARMCPRegInfo id_cp_reginfo[] = {
1776 /* Note that the MIDR isn't a simple constant register because
1777 * of the TI925 behaviour where writes to another register can
1778 * cause the MIDR value to change.
1780 * Unimplemented registers in the c15 0 0 0 space default to
1781 * MIDR. Define MIDR first as this entire space, then CTR, TCMTR
1782 * and friends override accordingly.
1784 { .name = "MIDR",
1785 .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = CP_ANY,
1786 .access = PL1_R, .resetvalue = cpu->midr,
1787 .writefn = arm_cp_write_ignore, .raw_writefn = raw_write,
1788 .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid),
1789 .type = ARM_CP_OVERRIDE },
1790 { .name = "CTR",
1791 .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1,
1792 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->ctr },
1793 { .name = "TCMTR",
1794 .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 2,
1795 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1796 { .name = "TLBTR",
1797 .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3,
1798 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1799 /* crn = 0 op1 = 0 crm = 3..7 : currently unassigned; we RAZ. */
1800 { .name = "DUMMY",
1801 .cp = 15, .crn = 0, .crm = 3, .opc1 = 0, .opc2 = CP_ANY,
1802 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1803 { .name = "DUMMY",
1804 .cp = 15, .crn = 0, .crm = 4, .opc1 = 0, .opc2 = CP_ANY,
1805 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1806 { .name = "DUMMY",
1807 .cp = 15, .crn = 0, .crm = 5, .opc1 = 0, .opc2 = CP_ANY,
1808 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1809 { .name = "DUMMY",
1810 .cp = 15, .crn = 0, .crm = 6, .opc1 = 0, .opc2 = CP_ANY,
1811 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1812 { .name = "DUMMY",
1813 .cp = 15, .crn = 0, .crm = 7, .opc1 = 0, .opc2 = CP_ANY,
1814 .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
1815 REGINFO_SENTINEL
1817 ARMCPRegInfo crn0_wi_reginfo = {
1818 .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY,
1819 .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W,
1820 .type = ARM_CP_NOP | ARM_CP_OVERRIDE
1822 if (arm_feature(env, ARM_FEATURE_OMAPCP) ||
1823 arm_feature(env, ARM_FEATURE_STRONGARM)) {
1824 ARMCPRegInfo *r;
1825 /* Register the blanket "writes ignored" value first to cover the
1826 * whole space. Then update the specific ID registers to allow write
1827 * access, so that they ignore writes rather than causing them to
1828 * UNDEF.
1830 define_one_arm_cp_reg(cpu, &crn0_wi_reginfo);
1831 for (r = id_cp_reginfo; r->type != ARM_CP_SENTINEL; r++) {
1832 r->access = PL1_RW;
1835 define_arm_cp_regs(cpu, id_cp_reginfo);
1838 if (arm_feature(env, ARM_FEATURE_MPIDR)) {
1839 define_arm_cp_regs(cpu, mpidr_cp_reginfo);
1842 if (arm_feature(env, ARM_FEATURE_AUXCR)) {
1843 ARMCPRegInfo auxcr = {
1844 .name = "AUXCR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1,
1845 .access = PL1_RW, .type = ARM_CP_CONST,
1846 .resetvalue = cpu->reset_auxcr
1848 define_one_arm_cp_reg(cpu, &auxcr);
1851 if (arm_feature(env, ARM_FEATURE_CBAR)) {
1852 ARMCPRegInfo cbar = {
1853 .name = "CBAR", .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0,
1854 .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar,
1855 .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address)
1857 define_one_arm_cp_reg(cpu, &cbar);
1860 /* Generic registers whose values depend on the implementation */
1862 ARMCPRegInfo sctlr = {
1863 .name = "SCTLR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0,
1864 .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_sys),
1865 .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr,
1866 .raw_writefn = raw_write,
1868 if (arm_feature(env, ARM_FEATURE_XSCALE)) {
1869 /* Normally we would always end the TB on an SCTLR write, but Linux
1870 * arch/arm/mach-pxa/sleep.S expects two instructions following
1871 * an MMU enable to execute from cache. Imitate this behaviour.
1873 sctlr.type |= ARM_CP_SUPPRESS_TB_END;
1875 define_one_arm_cp_reg(cpu, &sctlr);
1879 ARMCPU *cpu_arm_init(const char *cpu_model)
1881 ARMCPU *cpu;
1882 ObjectClass *oc;
1884 oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
1885 if (!oc) {
1886 return NULL;
1888 cpu = ARM_CPU(object_new(object_class_get_name(oc)));
1890 /* TODO this should be set centrally, once possible */
1891 object_property_set_bool(OBJECT(cpu), true, "realized", NULL);
1893 return cpu;
1896 void arm_cpu_register_gdb_regs_for_features(ARMCPU *cpu)
1898 CPUState *cs = CPU(cpu);
1899 CPUARMState *env = &cpu->env;
1901 if (arm_feature(env, ARM_FEATURE_AARCH64)) {
1902 gdb_register_coprocessor(cs, aarch64_fpu_gdb_get_reg,
1903 aarch64_fpu_gdb_set_reg,
1904 34, "aarch64-fpu.xml", 0);
1905 } else if (arm_feature(env, ARM_FEATURE_NEON)) {
1906 gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg,
1907 51, "arm-neon.xml", 0);
1908 } else if (arm_feature(env, ARM_FEATURE_VFP3)) {
1909 gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg,
1910 35, "arm-vfp3.xml", 0);
1911 } else if (arm_feature(env, ARM_FEATURE_VFP)) {
1912 gdb_register_coprocessor(cs, vfp_gdb_get_reg, vfp_gdb_set_reg,
1913 19, "arm-vfp.xml", 0);
1917 /* Sort alphabetically by type name, except for "any". */
1918 static gint arm_cpu_list_compare(gconstpointer a, gconstpointer b)
1920 ObjectClass *class_a = (ObjectClass *)a;
1921 ObjectClass *class_b = (ObjectClass *)b;
1922 const char *name_a, *name_b;
1924 name_a = object_class_get_name(class_a);
1925 name_b = object_class_get_name(class_b);
1926 if (strcmp(name_a, "any-" TYPE_ARM_CPU) == 0) {
1927 return 1;
1928 } else if (strcmp(name_b, "any-" TYPE_ARM_CPU) == 0) {
1929 return -1;
1930 } else {
1931 return strcmp(name_a, name_b);
1935 static void arm_cpu_list_entry(gpointer data, gpointer user_data)
1937 ObjectClass *oc = data;
1938 CPUListState *s = user_data;
1939 const char *typename;
1940 char *name;
1942 typename = object_class_get_name(oc);
1943 name = g_strndup(typename, strlen(typename) - strlen("-" TYPE_ARM_CPU));
1944 (*s->cpu_fprintf)(s->file, " %s\n",
1945 name);
1946 g_free(name);
1949 void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf)
1951 CPUListState s = {
1952 .file = f,
1953 .cpu_fprintf = cpu_fprintf,
1955 GSList *list;
1957 list = object_class_get_list(TYPE_ARM_CPU, false);
1958 list = g_slist_sort(list, arm_cpu_list_compare);
1959 (*cpu_fprintf)(f, "Available CPUs:\n");
1960 g_slist_foreach(list, arm_cpu_list_entry, &s);
1961 g_slist_free(list);
1962 #ifdef CONFIG_KVM
1963 /* The 'host' CPU type is dynamically registered only if KVM is
1964 * enabled, so we have to special-case it here:
1966 (*cpu_fprintf)(f, " host (only available in KVM mode)\n");
1967 #endif
1970 static void arm_cpu_add_definition(gpointer data, gpointer user_data)
1972 ObjectClass *oc = data;
1973 CpuDefinitionInfoList **cpu_list = user_data;
1974 CpuDefinitionInfoList *entry;
1975 CpuDefinitionInfo *info;
1976 const char *typename;
1978 typename = object_class_get_name(oc);
1979 info = g_malloc0(sizeof(*info));
1980 info->name = g_strndup(typename,
1981 strlen(typename) - strlen("-" TYPE_ARM_CPU));
1983 entry = g_malloc0(sizeof(*entry));
1984 entry->value = info;
1985 entry->next = *cpu_list;
1986 *cpu_list = entry;
1989 CpuDefinitionInfoList *arch_query_cpu_definitions(Error **errp)
1991 CpuDefinitionInfoList *cpu_list = NULL;
1992 GSList *list;
1994 list = object_class_get_list(TYPE_ARM_CPU, false);
1995 g_slist_foreach(list, arm_cpu_add_definition, &cpu_list);
1996 g_slist_free(list);
1998 return cpu_list;
2001 static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
2002 void *opaque, int state,
2003 int crm, int opc1, int opc2)
2005 /* Private utility function for define_one_arm_cp_reg_with_opaque():
2006 * add a single reginfo struct to the hash table.
2008 uint32_t *key = g_new(uint32_t, 1);
2009 ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
2010 int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
2011 if (r->state == ARM_CP_STATE_BOTH && state == ARM_CP_STATE_AA32) {
2012 /* The AArch32 view of a shared register sees the lower 32 bits
2013 * of a 64 bit backing field. It is not migratable as the AArch64
2014 * view handles that. AArch64 also handles reset.
2015 * We assume it is a cp15 register.
2017 r2->cp = 15;
2018 r2->type |= ARM_CP_NO_MIGRATE;
2019 r2->resetfn = arm_cp_reset_ignore;
2020 #ifdef HOST_WORDS_BIGENDIAN
2021 if (r2->fieldoffset) {
2022 r2->fieldoffset += sizeof(uint32_t);
2024 #endif
2026 if (state == ARM_CP_STATE_AA64) {
2027 /* To allow abbreviation of ARMCPRegInfo
2028 * definitions, we treat cp == 0 as equivalent to
2029 * the value for "standard guest-visible sysreg".
2031 if (r->cp == 0) {
2032 r2->cp = CP_REG_ARM64_SYSREG_CP;
2034 *key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm,
2035 r2->opc0, opc1, opc2);
2036 } else {
2037 *key = ENCODE_CP_REG(r2->cp, is64, r2->crn, crm, opc1, opc2);
2039 if (opaque) {
2040 r2->opaque = opaque;
2042 /* Make sure reginfo passed to helpers for wildcarded regs
2043 * has the correct crm/opc1/opc2 for this reg, not CP_ANY:
2045 r2->crm = crm;
2046 r2->opc1 = opc1;
2047 r2->opc2 = opc2;
2048 /* By convention, for wildcarded registers only the first
2049 * entry is used for migration; the others are marked as
2050 * NO_MIGRATE so we don't try to transfer the register
2051 * multiple times. Special registers (ie NOP/WFI) are
2052 * never migratable.
2054 if ((r->type & ARM_CP_SPECIAL) ||
2055 ((r->crm == CP_ANY) && crm != 0) ||
2056 ((r->opc1 == CP_ANY) && opc1 != 0) ||
2057 ((r->opc2 == CP_ANY) && opc2 != 0)) {
2058 r2->type |= ARM_CP_NO_MIGRATE;
2061 /* Overriding of an existing definition must be explicitly
2062 * requested.
2064 if (!(r->type & ARM_CP_OVERRIDE)) {
2065 ARMCPRegInfo *oldreg;
2066 oldreg = g_hash_table_lookup(cpu->cp_regs, key);
2067 if (oldreg && !(oldreg->type & ARM_CP_OVERRIDE)) {
2068 fprintf(stderr, "Register redefined: cp=%d %d bit "
2069 "crn=%d crm=%d opc1=%d opc2=%d, "
2070 "was %s, now %s\n", r2->cp, 32 + 32 * is64,
2071 r2->crn, r2->crm, r2->opc1, r2->opc2,
2072 oldreg->name, r2->name);
2073 g_assert_not_reached();
2076 g_hash_table_insert(cpu->cp_regs, key, r2);
2080 void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
2081 const ARMCPRegInfo *r, void *opaque)
2083 /* Define implementations of coprocessor registers.
2084 * We store these in a hashtable because typically
2085 * there are less than 150 registers in a space which
2086 * is 16*16*16*8*8 = 262144 in size.
2087 * Wildcarding is supported for the crm, opc1 and opc2 fields.
2088 * If a register is defined twice then the second definition is
2089 * used, so this can be used to define some generic registers and
2090 * then override them with implementation specific variations.
2091 * At least one of the original and the second definition should
2092 * include ARM_CP_OVERRIDE in its type bits -- this is just a guard
2093 * against accidental use.
2095 * The state field defines whether the register is to be
2096 * visible in the AArch32 or AArch64 execution state. If the
2097 * state is set to ARM_CP_STATE_BOTH then we synthesise a
2098 * reginfo structure for the AArch32 view, which sees the lower
2099 * 32 bits of the 64 bit register.
2101 * Only registers visible in AArch64 may set r->opc0; opc0 cannot
2102 * be wildcarded. AArch64 registers are always considered to be 64
2103 * bits; the ARM_CP_64BIT* flag applies only to the AArch32 view of
2104 * the register, if any.
2106 int crm, opc1, opc2, state;
2107 int crmmin = (r->crm == CP_ANY) ? 0 : r->crm;
2108 int crmmax = (r->crm == CP_ANY) ? 15 : r->crm;
2109 int opc1min = (r->opc1 == CP_ANY) ? 0 : r->opc1;
2110 int opc1max = (r->opc1 == CP_ANY) ? 7 : r->opc1;
2111 int opc2min = (r->opc2 == CP_ANY) ? 0 : r->opc2;
2112 int opc2max = (r->opc2 == CP_ANY) ? 7 : r->opc2;
2113 /* 64 bit registers have only CRm and Opc1 fields */
2114 assert(!((r->type & ARM_CP_64BIT) && (r->opc2 || r->crn)));
2115 /* op0 only exists in the AArch64 encodings */
2116 assert((r->state != ARM_CP_STATE_AA32) || (r->opc0 == 0));
2117 /* AArch64 regs are all 64 bit so ARM_CP_64BIT is meaningless */
2118 assert((r->state != ARM_CP_STATE_AA64) || !(r->type & ARM_CP_64BIT));
2119 /* The AArch64 pseudocode CheckSystemAccess() specifies that op1
2120 * encodes a minimum access level for the register. We roll this
2121 * runtime check into our general permission check code, so check
2122 * here that the reginfo's specified permissions are strict enough
2123 * to encompass the generic architectural permission check.
2125 if (r->state != ARM_CP_STATE_AA32) {
2126 int mask = 0;
2127 switch (r->opc1) {
2128 case 0: case 1: case 2:
2129 /* min_EL EL1 */
2130 mask = PL1_RW;
2131 break;
2132 case 3:
2133 /* min_EL EL0 */
2134 mask = PL0_RW;
2135 break;
2136 case 4:
2137 /* min_EL EL2 */
2138 mask = PL2_RW;
2139 break;
2140 case 5:
2141 /* unallocated encoding, so not possible */
2142 assert(false);
2143 break;
2144 case 6:
2145 /* min_EL EL3 */
2146 mask = PL3_RW;
2147 break;
2148 case 7:
2149 /* min_EL EL1, secure mode only (we don't check the latter) */
2150 mask = PL1_RW;
2151 break;
2152 default:
2153 /* broken reginfo with out-of-range opc1 */
2154 assert(false);
2155 break;
2157 /* assert our permissions are not too lax (stricter is fine) */
2158 assert((r->access & ~mask) == 0);
2161 /* Check that the register definition has enough info to handle
2162 * reads and writes if they are permitted.
2164 if (!(r->type & (ARM_CP_SPECIAL|ARM_CP_CONST))) {
2165 if (r->access & PL3_R) {
2166 assert(r->fieldoffset || r->readfn);
2168 if (r->access & PL3_W) {
2169 assert(r->fieldoffset || r->writefn);
2172 /* Bad type field probably means missing sentinel at end of reg list */
2173 assert(cptype_valid(r->type));
2174 for (crm = crmmin; crm <= crmmax; crm++) {
2175 for (opc1 = opc1min; opc1 <= opc1max; opc1++) {
2176 for (opc2 = opc2min; opc2 <= opc2max; opc2++) {
2177 for (state = ARM_CP_STATE_AA32;
2178 state <= ARM_CP_STATE_AA64; state++) {
2179 if (r->state != state && r->state != ARM_CP_STATE_BOTH) {
2180 continue;
2182 add_cpreg_to_hashtable(cpu, r, opaque, state,
2183 crm, opc1, opc2);
2190 void define_arm_cp_regs_with_opaque(ARMCPU *cpu,
2191 const ARMCPRegInfo *regs, void *opaque)
2193 /* Define a whole list of registers */
2194 const ARMCPRegInfo *r;
2195 for (r = regs; r->type != ARM_CP_SENTINEL; r++) {
2196 define_one_arm_cp_reg_with_opaque(cpu, r, opaque);
2200 const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp)
2202 return g_hash_table_lookup(cpregs, &encoded_cp);
2205 int arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri,
2206 uint64_t value)
2208 /* Helper coprocessor write function for write-ignore registers */
2209 return 0;
2212 int arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value)
2214 /* Helper coprocessor write function for read-as-zero registers */
2215 *value = 0;
2216 return 0;
2219 void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque)
2221 /* Helper coprocessor reset function for do-nothing-on-reset registers */
2224 static int bad_mode_switch(CPUARMState *env, int mode)
2226 /* Return true if it is not valid for us to switch to
2227 * this CPU mode (ie all the UNPREDICTABLE cases in
2228 * the ARM ARM CPSRWriteByInstr pseudocode).
2230 switch (mode) {
2231 case ARM_CPU_MODE_USR:
2232 case ARM_CPU_MODE_SYS:
2233 case ARM_CPU_MODE_SVC:
2234 case ARM_CPU_MODE_ABT:
2235 case ARM_CPU_MODE_UND:
2236 case ARM_CPU_MODE_IRQ:
2237 case ARM_CPU_MODE_FIQ:
2238 return 0;
2239 default:
2240 return 1;
2244 uint32_t cpsr_read(CPUARMState *env)
2246 int ZF;
2247 ZF = (env->ZF == 0);
2248 return env->uncached_cpsr | (env->NF & 0x80000000) | (ZF << 30) |
2249 (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27)
2250 | (env->thumb << 5) | ((env->condexec_bits & 3) << 25)
2251 | ((env->condexec_bits & 0xfc) << 8)
2252 | (env->GE << 16);
2255 void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
2257 if (mask & CPSR_NZCV) {
2258 env->ZF = (~val) & CPSR_Z;
2259 env->NF = val;
2260 env->CF = (val >> 29) & 1;
2261 env->VF = (val << 3) & 0x80000000;
2263 if (mask & CPSR_Q)
2264 env->QF = ((val & CPSR_Q) != 0);
2265 if (mask & CPSR_T)
2266 env->thumb = ((val & CPSR_T) != 0);
2267 if (mask & CPSR_IT_0_1) {
2268 env->condexec_bits &= ~3;
2269 env->condexec_bits |= (val >> 25) & 3;
2271 if (mask & CPSR_IT_2_7) {
2272 env->condexec_bits &= 3;
2273 env->condexec_bits |= (val >> 8) & 0xfc;
2275 if (mask & CPSR_GE) {
2276 env->GE = (val >> 16) & 0xf;
2279 if ((env->uncached_cpsr ^ val) & mask & CPSR_M) {
2280 if (bad_mode_switch(env, val & CPSR_M)) {
2281 /* Attempt to switch to an invalid mode: this is UNPREDICTABLE.
2282 * We choose to ignore the attempt and leave the CPSR M field
2283 * untouched.
2285 mask &= ~CPSR_M;
2286 } else {
2287 switch_mode(env, val & CPSR_M);
2290 mask &= ~CACHED_CPSR_BITS;
2291 env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask);
2294 /* Sign/zero extend */
2295 uint32_t HELPER(sxtb16)(uint32_t x)
2297 uint32_t res;
2298 res = (uint16_t)(int8_t)x;
2299 res |= (uint32_t)(int8_t)(x >> 16) << 16;
2300 return res;
2303 uint32_t HELPER(uxtb16)(uint32_t x)
2305 uint32_t res;
2306 res = (uint16_t)(uint8_t)x;
2307 res |= (uint32_t)(uint8_t)(x >> 16) << 16;
2308 return res;
2311 uint32_t HELPER(clz)(uint32_t x)
2313 return clz32(x);
2316 int32_t HELPER(sdiv)(int32_t num, int32_t den)
2318 if (den == 0)
2319 return 0;
2320 if (num == INT_MIN && den == -1)
2321 return INT_MIN;
2322 return num / den;
2325 uint32_t HELPER(udiv)(uint32_t num, uint32_t den)
2327 if (den == 0)
2328 return 0;
2329 return num / den;
2332 uint32_t HELPER(rbit)(uint32_t x)
2334 x = ((x & 0xff000000) >> 24)
2335 | ((x & 0x00ff0000) >> 8)
2336 | ((x & 0x0000ff00) << 8)
2337 | ((x & 0x000000ff) << 24);
2338 x = ((x & 0xf0f0f0f0) >> 4)
2339 | ((x & 0x0f0f0f0f) << 4);
2340 x = ((x & 0x88888888) >> 3)
2341 | ((x & 0x44444444) >> 1)
2342 | ((x & 0x22222222) << 1)
2343 | ((x & 0x11111111) << 3);
2344 return x;
2347 #if defined(CONFIG_USER_ONLY)
2349 void arm_cpu_do_interrupt(CPUState *cs)
2351 ARMCPU *cpu = ARM_CPU(cs);
2352 CPUARMState *env = &cpu->env;
2354 env->exception_index = -1;
2357 int cpu_arm_handle_mmu_fault (CPUARMState *env, target_ulong address, int rw,
2358 int mmu_idx)
2360 if (rw == 2) {
2361 env->exception_index = EXCP_PREFETCH_ABORT;
2362 env->cp15.c6_insn = address;
2363 } else {
2364 env->exception_index = EXCP_DATA_ABORT;
2365 env->cp15.c6_data = address;
2367 return 1;
2370 /* These should probably raise undefined insn exceptions. */
2371 void HELPER(v7m_msr)(CPUARMState *env, uint32_t reg, uint32_t val)
2373 cpu_abort(env, "v7m_mrs %d\n", reg);
2376 uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
2378 cpu_abort(env, "v7m_mrs %d\n", reg);
2379 return 0;
2382 void switch_mode(CPUARMState *env, int mode)
2384 if (mode != ARM_CPU_MODE_USR)
2385 cpu_abort(env, "Tried to switch out of user mode\n");
2388 void HELPER(set_r13_banked)(CPUARMState *env, uint32_t mode, uint32_t val)
2390 cpu_abort(env, "banked r13 write\n");
2393 uint32_t HELPER(get_r13_banked)(CPUARMState *env, uint32_t mode)
2395 cpu_abort(env, "banked r13 read\n");
2396 return 0;
2399 #else
2401 /* Map CPU modes onto saved register banks. */
2402 int bank_number(int mode)
2404 switch (mode) {
2405 case ARM_CPU_MODE_USR:
2406 case ARM_CPU_MODE_SYS:
2407 return 0;
2408 case ARM_CPU_MODE_SVC:
2409 return 1;
2410 case ARM_CPU_MODE_ABT:
2411 return 2;
2412 case ARM_CPU_MODE_UND:
2413 return 3;
2414 case ARM_CPU_MODE_IRQ:
2415 return 4;
2416 case ARM_CPU_MODE_FIQ:
2417 return 5;
2419 hw_error("bank number requested for bad CPSR mode value 0x%x\n", mode);
2422 void switch_mode(CPUARMState *env, int mode)
2424 int old_mode;
2425 int i;
2427 old_mode = env->uncached_cpsr & CPSR_M;
2428 if (mode == old_mode)
2429 return;
2431 if (old_mode == ARM_CPU_MODE_FIQ) {
2432 memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
2433 memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
2434 } else if (mode == ARM_CPU_MODE_FIQ) {
2435 memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
2436 memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
2439 i = bank_number(old_mode);
2440 env->banked_r13[i] = env->regs[13];
2441 env->banked_r14[i] = env->regs[14];
2442 env->banked_spsr[i] = env->spsr;
2444 i = bank_number(mode);
2445 env->regs[13] = env->banked_r13[i];
2446 env->regs[14] = env->banked_r14[i];
2447 env->spsr = env->banked_spsr[i];
2450 static void v7m_push(CPUARMState *env, uint32_t val)
2452 env->regs[13] -= 4;
2453 stl_phys(env->regs[13], val);
2456 static uint32_t v7m_pop(CPUARMState *env)
2458 uint32_t val;
2459 val = ldl_phys(env->regs[13]);
2460 env->regs[13] += 4;
2461 return val;
2464 /* Switch to V7M main or process stack pointer. */
2465 static void switch_v7m_sp(CPUARMState *env, int process)
2467 uint32_t tmp;
2468 if (env->v7m.current_sp != process) {
2469 tmp = env->v7m.other_sp;
2470 env->v7m.other_sp = env->regs[13];
2471 env->regs[13] = tmp;
2472 env->v7m.current_sp = process;
2476 static void do_v7m_exception_exit(CPUARMState *env)
2478 uint32_t type;
2479 uint32_t xpsr;
2481 type = env->regs[15];
2482 if (env->v7m.exception != 0)
2483 armv7m_nvic_complete_irq(env->nvic, env->v7m.exception);
2485 /* Switch to the target stack. */
2486 switch_v7m_sp(env, (type & 4) != 0);
2487 /* Pop registers. */
2488 env->regs[0] = v7m_pop(env);
2489 env->regs[1] = v7m_pop(env);
2490 env->regs[2] = v7m_pop(env);
2491 env->regs[3] = v7m_pop(env);
2492 env->regs[12] = v7m_pop(env);
2493 env->regs[14] = v7m_pop(env);
2494 env->regs[15] = v7m_pop(env);
2495 xpsr = v7m_pop(env);
2496 xpsr_write(env, xpsr, 0xfffffdff);
2497 /* Undo stack alignment. */
2498 if (xpsr & 0x200)
2499 env->regs[13] |= 4;
2500 /* ??? The exception return type specifies Thread/Handler mode. However
2501 this is also implied by the xPSR value. Not sure what to do
2502 if there is a mismatch. */
2503 /* ??? Likewise for mismatches between the CONTROL register and the stack
2504 pointer. */
2507 /* Exception names for debug logging; note that not all of these
2508 * precisely correspond to architectural exceptions.
2510 static const char * const excnames[] = {
2511 [EXCP_UDEF] = "Undefined Instruction",
2512 [EXCP_SWI] = "SVC",
2513 [EXCP_PREFETCH_ABORT] = "Prefetch Abort",
2514 [EXCP_DATA_ABORT] = "Data Abort",
2515 [EXCP_IRQ] = "IRQ",
2516 [EXCP_FIQ] = "FIQ",
2517 [EXCP_BKPT] = "Breakpoint",
2518 [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit",
2519 [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage",
2520 [EXCP_STREX] = "QEMU intercept of STREX",
2523 static inline void arm_log_exception(int idx)
2525 if (qemu_loglevel_mask(CPU_LOG_INT)) {
2526 const char *exc = NULL;
2528 if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
2529 exc = excnames[idx];
2531 if (!exc) {
2532 exc = "unknown";
2534 qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc);
2538 void arm_v7m_cpu_do_interrupt(CPUState *cs)
2540 ARMCPU *cpu = ARM_CPU(cs);
2541 CPUARMState *env = &cpu->env;
2542 uint32_t xpsr = xpsr_read(env);
2543 uint32_t lr;
2544 uint32_t addr;
2546 arm_log_exception(env->exception_index);
2548 lr = 0xfffffff1;
2549 if (env->v7m.current_sp)
2550 lr |= 4;
2551 if (env->v7m.exception == 0)
2552 lr |= 8;
2554 /* For exceptions we just mark as pending on the NVIC, and let that
2555 handle it. */
2556 /* TODO: Need to escalate if the current priority is higher than the
2557 one we're raising. */
2558 switch (env->exception_index) {
2559 case EXCP_UDEF:
2560 armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE);
2561 return;
2562 case EXCP_SWI:
2563 /* The PC already points to the next instruction. */
2564 armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC);
2565 return;
2566 case EXCP_PREFETCH_ABORT:
2567 case EXCP_DATA_ABORT:
2568 armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM);
2569 return;
2570 case EXCP_BKPT:
2571 if (semihosting_enabled) {
2572 int nr;
2573 nr = arm_lduw_code(env, env->regs[15], env->bswap_code) & 0xff;
2574 if (nr == 0xab) {
2575 env->regs[15] += 2;
2576 env->regs[0] = do_arm_semihosting(env);
2577 qemu_log_mask(CPU_LOG_INT, "...handled as semihosting call\n");
2578 return;
2581 armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_DEBUG);
2582 return;
2583 case EXCP_IRQ:
2584 env->v7m.exception = armv7m_nvic_acknowledge_irq(env->nvic);
2585 break;
2586 case EXCP_EXCEPTION_EXIT:
2587 do_v7m_exception_exit(env);
2588 return;
2589 default:
2590 cpu_abort(env, "Unhandled exception 0x%x\n", env->exception_index);
2591 return; /* Never happens. Keep compiler happy. */
2594 /* Align stack pointer. */
2595 /* ??? Should only do this if Configuration Control Register
2596 STACKALIGN bit is set. */
2597 if (env->regs[13] & 4) {
2598 env->regs[13] -= 4;
2599 xpsr |= 0x200;
2601 /* Switch to the handler mode. */
2602 v7m_push(env, xpsr);
2603 v7m_push(env, env->regs[15]);
2604 v7m_push(env, env->regs[14]);
2605 v7m_push(env, env->regs[12]);
2606 v7m_push(env, env->regs[3]);
2607 v7m_push(env, env->regs[2]);
2608 v7m_push(env, env->regs[1]);
2609 v7m_push(env, env->regs[0]);
2610 switch_v7m_sp(env, 0);
2611 /* Clear IT bits */
2612 env->condexec_bits = 0;
2613 env->regs[14] = lr;
2614 addr = ldl_phys(env->v7m.vecbase + env->v7m.exception * 4);
2615 env->regs[15] = addr & 0xfffffffe;
2616 env->thumb = addr & 1;
2619 /* Handle a CPU exception. */
2620 void arm_cpu_do_interrupt(CPUState *cs)
2622 ARMCPU *cpu = ARM_CPU(cs);
2623 CPUARMState *env = &cpu->env;
2624 uint32_t addr;
2625 uint32_t mask;
2626 int new_mode;
2627 uint32_t offset;
2629 assert(!IS_M(env));
2631 arm_log_exception(env->exception_index);
2633 /* TODO: Vectored interrupt controller. */
2634 switch (env->exception_index) {
2635 case EXCP_UDEF:
2636 new_mode = ARM_CPU_MODE_UND;
2637 addr = 0x04;
2638 mask = CPSR_I;
2639 if (env->thumb)
2640 offset = 2;
2641 else
2642 offset = 4;
2643 break;
2644 case EXCP_SWI:
2645 if (semihosting_enabled) {
2646 /* Check for semihosting interrupt. */
2647 if (env->thumb) {
2648 mask = arm_lduw_code(env, env->regs[15] - 2, env->bswap_code)
2649 & 0xff;
2650 } else {
2651 mask = arm_ldl_code(env, env->regs[15] - 4, env->bswap_code)
2652 & 0xffffff;
2654 /* Only intercept calls from privileged modes, to provide some
2655 semblance of security. */
2656 if (((mask == 0x123456 && !env->thumb)
2657 || (mask == 0xab && env->thumb))
2658 && (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR) {
2659 env->regs[0] = do_arm_semihosting(env);
2660 qemu_log_mask(CPU_LOG_INT, "...handled as semihosting call\n");
2661 return;
2664 new_mode = ARM_CPU_MODE_SVC;
2665 addr = 0x08;
2666 mask = CPSR_I;
2667 /* The PC already points to the next instruction. */
2668 offset = 0;
2669 break;
2670 case EXCP_BKPT:
2671 /* See if this is a semihosting syscall. */
2672 if (env->thumb && semihosting_enabled) {
2673 mask = arm_lduw_code(env, env->regs[15], env->bswap_code) & 0xff;
2674 if (mask == 0xab
2675 && (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR) {
2676 env->regs[15] += 2;
2677 env->regs[0] = do_arm_semihosting(env);
2678 qemu_log_mask(CPU_LOG_INT, "...handled as semihosting call\n");
2679 return;
2682 env->cp15.c5_insn = 2;
2683 /* Fall through to prefetch abort. */
2684 case EXCP_PREFETCH_ABORT:
2685 qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n",
2686 env->cp15.c5_insn, env->cp15.c6_insn);
2687 new_mode = ARM_CPU_MODE_ABT;
2688 addr = 0x0c;
2689 mask = CPSR_A | CPSR_I;
2690 offset = 4;
2691 break;
2692 case EXCP_DATA_ABORT:
2693 qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n",
2694 env->cp15.c5_data, env->cp15.c6_data);
2695 new_mode = ARM_CPU_MODE_ABT;
2696 addr = 0x10;
2697 mask = CPSR_A | CPSR_I;
2698 offset = 8;
2699 break;
2700 case EXCP_IRQ:
2701 new_mode = ARM_CPU_MODE_IRQ;
2702 addr = 0x18;
2703 /* Disable IRQ and imprecise data aborts. */
2704 mask = CPSR_A | CPSR_I;
2705 offset = 4;
2706 break;
2707 case EXCP_FIQ:
2708 new_mode = ARM_CPU_MODE_FIQ;
2709 addr = 0x1c;
2710 /* Disable FIQ, IRQ and imprecise data aborts. */
2711 mask = CPSR_A | CPSR_I | CPSR_F;
2712 offset = 4;
2713 break;
2714 default:
2715 cpu_abort(env, "Unhandled exception 0x%x\n", env->exception_index);
2716 return; /* Never happens. Keep compiler happy. */
2718 /* High vectors. */
2719 if (env->cp15.c1_sys & (1 << 13)) {
2720 /* when enabled, base address cannot be remapped. */
2721 addr += 0xffff0000;
2722 } else {
2723 /* ARM v7 architectures provide a vector base address register to remap
2724 * the interrupt vector table.
2725 * This register is only followed in non-monitor mode, and has a secure
2726 * and un-secure copy. Since the cpu is always in a un-secure operation
2727 * and is never in monitor mode this feature is always active.
2728 * Note: only bits 31:5 are valid.
2730 addr += env->cp15.c12_vbar;
2732 switch_mode (env, new_mode);
2733 env->spsr = cpsr_read(env);
2734 /* Clear IT bits. */
2735 env->condexec_bits = 0;
2736 /* Switch to the new mode, and to the correct instruction set. */
2737 env->uncached_cpsr = (env->uncached_cpsr & ~CPSR_M) | new_mode;
2738 env->uncached_cpsr |= mask;
2739 /* this is a lie, as the was no c1_sys on V4T/V5, but who cares
2740 * and we should just guard the thumb mode on V4 */
2741 if (arm_feature(env, ARM_FEATURE_V4T)) {
2742 env->thumb = (env->cp15.c1_sys & (1 << 30)) != 0;
2744 env->regs[14] = env->regs[15] + offset;
2745 env->regs[15] = addr;
2746 cs->interrupt_request |= CPU_INTERRUPT_EXITTB;
2749 /* Check section/page access permissions.
2750 Returns the page protection flags, or zero if the access is not
2751 permitted. */
2752 static inline int check_ap(CPUARMState *env, int ap, int domain_prot,
2753 int access_type, int is_user)
2755 int prot_ro;
2757 if (domain_prot == 3) {
2758 return PAGE_READ | PAGE_WRITE;
2761 if (access_type == 1)
2762 prot_ro = 0;
2763 else
2764 prot_ro = PAGE_READ;
2766 switch (ap) {
2767 case 0:
2768 if (access_type == 1)
2769 return 0;
2770 switch ((env->cp15.c1_sys >> 8) & 3) {
2771 case 1:
2772 return is_user ? 0 : PAGE_READ;
2773 case 2:
2774 return PAGE_READ;
2775 default:
2776 return 0;
2778 case 1:
2779 return is_user ? 0 : PAGE_READ | PAGE_WRITE;
2780 case 2:
2781 if (is_user)
2782 return prot_ro;
2783 else
2784 return PAGE_READ | PAGE_WRITE;
2785 case 3:
2786 return PAGE_READ | PAGE_WRITE;
2787 case 4: /* Reserved. */
2788 return 0;
2789 case 5:
2790 return is_user ? 0 : prot_ro;
2791 case 6:
2792 return prot_ro;
2793 case 7:
2794 if (!arm_feature (env, ARM_FEATURE_V6K))
2795 return 0;
2796 return prot_ro;
2797 default:
2798 abort();
2802 static uint32_t get_level1_table_address(CPUARMState *env, uint32_t address)
2804 uint32_t table;
2806 if (address & env->cp15.c2_mask)
2807 table = env->cp15.c2_base1 & 0xffffc000;
2808 else
2809 table = env->cp15.c2_base0 & env->cp15.c2_base_mask;
2811 table |= (address >> 18) & 0x3ffc;
2812 return table;
2815 static int get_phys_addr_v5(CPUARMState *env, uint32_t address, int access_type,
2816 int is_user, hwaddr *phys_ptr,
2817 int *prot, target_ulong *page_size)
2819 int code;
2820 uint32_t table;
2821 uint32_t desc;
2822 int type;
2823 int ap;
2824 int domain;
2825 int domain_prot;
2826 hwaddr phys_addr;
2828 /* Pagetable walk. */
2829 /* Lookup l1 descriptor. */
2830 table = get_level1_table_address(env, address);
2831 desc = ldl_phys(table);
2832 type = (desc & 3);
2833 domain = (desc >> 5) & 0x0f;
2834 domain_prot = (env->cp15.c3 >> (domain * 2)) & 3;
2835 if (type == 0) {
2836 /* Section translation fault. */
2837 code = 5;
2838 goto do_fault;
2840 if (domain_prot == 0 || domain_prot == 2) {
2841 if (type == 2)
2842 code = 9; /* Section domain fault. */
2843 else
2844 code = 11; /* Page domain fault. */
2845 goto do_fault;
2847 if (type == 2) {
2848 /* 1Mb section. */
2849 phys_addr = (desc & 0xfff00000) | (address & 0x000fffff);
2850 ap = (desc >> 10) & 3;
2851 code = 13;
2852 *page_size = 1024 * 1024;
2853 } else {
2854 /* Lookup l2 entry. */
2855 if (type == 1) {
2856 /* Coarse pagetable. */
2857 table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
2858 } else {
2859 /* Fine pagetable. */
2860 table = (desc & 0xfffff000) | ((address >> 8) & 0xffc);
2862 desc = ldl_phys(table);
2863 switch (desc & 3) {
2864 case 0: /* Page translation fault. */
2865 code = 7;
2866 goto do_fault;
2867 case 1: /* 64k page. */
2868 phys_addr = (desc & 0xffff0000) | (address & 0xffff);
2869 ap = (desc >> (4 + ((address >> 13) & 6))) & 3;
2870 *page_size = 0x10000;
2871 break;
2872 case 2: /* 4k page. */
2873 phys_addr = (desc & 0xfffff000) | (address & 0xfff);
2874 ap = (desc >> (4 + ((address >> 13) & 6))) & 3;
2875 *page_size = 0x1000;
2876 break;
2877 case 3: /* 1k page. */
2878 if (type == 1) {
2879 if (arm_feature(env, ARM_FEATURE_XSCALE)) {
2880 phys_addr = (desc & 0xfffff000) | (address & 0xfff);
2881 } else {
2882 /* Page translation fault. */
2883 code = 7;
2884 goto do_fault;
2886 } else {
2887 phys_addr = (desc & 0xfffffc00) | (address & 0x3ff);
2889 ap = (desc >> 4) & 3;
2890 *page_size = 0x400;
2891 break;
2892 default:
2893 /* Never happens, but compiler isn't smart enough to tell. */
2894 abort();
2896 code = 15;
2898 *prot = check_ap(env, ap, domain_prot, access_type, is_user);
2899 if (!*prot) {
2900 /* Access permission fault. */
2901 goto do_fault;
2903 *prot |= PAGE_EXEC;
2904 *phys_ptr = phys_addr;
2905 return 0;
2906 do_fault:
2907 return code | (domain << 4);
2910 static int get_phys_addr_v6(CPUARMState *env, uint32_t address, int access_type,
2911 int is_user, hwaddr *phys_ptr,
2912 int *prot, target_ulong *page_size)
2914 int code;
2915 uint32_t table;
2916 uint32_t desc;
2917 uint32_t xn;
2918 uint32_t pxn = 0;
2919 int type;
2920 int ap;
2921 int domain = 0;
2922 int domain_prot;
2923 hwaddr phys_addr;
2925 /* Pagetable walk. */
2926 /* Lookup l1 descriptor. */
2927 table = get_level1_table_address(env, address);
2928 desc = ldl_phys(table);
2929 type = (desc & 3);
2930 if (type == 0 || (type == 3 && !arm_feature(env, ARM_FEATURE_PXN))) {
2931 /* Section translation fault, or attempt to use the encoding
2932 * which is Reserved on implementations without PXN.
2934 code = 5;
2935 goto do_fault;
2937 if ((type == 1) || !(desc & (1 << 18))) {
2938 /* Page or Section. */
2939 domain = (desc >> 5) & 0x0f;
2941 domain_prot = (env->cp15.c3 >> (domain * 2)) & 3;
2942 if (domain_prot == 0 || domain_prot == 2) {
2943 if (type != 1) {
2944 code = 9; /* Section domain fault. */
2945 } else {
2946 code = 11; /* Page domain fault. */
2948 goto do_fault;
2950 if (type != 1) {
2951 if (desc & (1 << 18)) {
2952 /* Supersection. */
2953 phys_addr = (desc & 0xff000000) | (address & 0x00ffffff);
2954 *page_size = 0x1000000;
2955 } else {
2956 /* Section. */
2957 phys_addr = (desc & 0xfff00000) | (address & 0x000fffff);
2958 *page_size = 0x100000;
2960 ap = ((desc >> 10) & 3) | ((desc >> 13) & 4);
2961 xn = desc & (1 << 4);
2962 pxn = desc & 1;
2963 code = 13;
2964 } else {
2965 if (arm_feature(env, ARM_FEATURE_PXN)) {
2966 pxn = (desc >> 2) & 1;
2968 /* Lookup l2 entry. */
2969 table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc);
2970 desc = ldl_phys(table);
2971 ap = ((desc >> 4) & 3) | ((desc >> 7) & 4);
2972 switch (desc & 3) {
2973 case 0: /* Page translation fault. */
2974 code = 7;
2975 goto do_fault;
2976 case 1: /* 64k page. */
2977 phys_addr = (desc & 0xffff0000) | (address & 0xffff);
2978 xn = desc & (1 << 15);
2979 *page_size = 0x10000;
2980 break;
2981 case 2: case 3: /* 4k page. */
2982 phys_addr = (desc & 0xfffff000) | (address & 0xfff);
2983 xn = desc & 1;
2984 *page_size = 0x1000;
2985 break;
2986 default:
2987 /* Never happens, but compiler isn't smart enough to tell. */
2988 abort();
2990 code = 15;
2992 if (domain_prot == 3) {
2993 *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
2994 } else {
2995 if (pxn && !is_user) {
2996 xn = 1;
2998 if (xn && access_type == 2)
2999 goto do_fault;
3001 /* The simplified model uses AP[0] as an access control bit. */
3002 if ((env->cp15.c1_sys & (1 << 29)) && (ap & 1) == 0) {
3003 /* Access flag fault. */
3004 code = (code == 15) ? 6 : 3;
3005 goto do_fault;
3007 *prot = check_ap(env, ap, domain_prot, access_type, is_user);
3008 if (!*prot) {
3009 /* Access permission fault. */
3010 goto do_fault;
3012 if (!xn) {
3013 *prot |= PAGE_EXEC;
3016 *phys_ptr = phys_addr;
3017 return 0;
3018 do_fault:
3019 return code | (domain << 4);
3022 /* Fault type for long-descriptor MMU fault reporting; this corresponds
3023 * to bits [5..2] in the STATUS field in long-format DFSR/IFSR.
3025 typedef enum {
3026 translation_fault = 1,
3027 access_fault = 2,
3028 permission_fault = 3,
3029 } MMUFaultType;
3031 static int get_phys_addr_lpae(CPUARMState *env, uint32_t address,
3032 int access_type, int is_user,
3033 hwaddr *phys_ptr, int *prot,
3034 target_ulong *page_size_ptr)
3036 /* Read an LPAE long-descriptor translation table. */
3037 MMUFaultType fault_type = translation_fault;
3038 uint32_t level = 1;
3039 uint32_t epd;
3040 uint32_t tsz;
3041 uint64_t ttbr;
3042 int ttbr_select;
3043 int n;
3044 hwaddr descaddr;
3045 uint32_t tableattrs;
3046 target_ulong page_size;
3047 uint32_t attrs;
3049 /* Determine whether this address is in the region controlled by
3050 * TTBR0 or TTBR1 (or if it is in neither region and should fault).
3051 * This is a Non-secure PL0/1 stage 1 translation, so controlled by
3052 * TTBCR/TTBR0/TTBR1 in accordance with ARM ARM DDI0406C table B-32:
3054 uint32_t t0sz = extract32(env->cp15.c2_control, 0, 3);
3055 uint32_t t1sz = extract32(env->cp15.c2_control, 16, 3);
3056 if (t0sz && !extract32(address, 32 - t0sz, t0sz)) {
3057 /* there is a ttbr0 region and we are in it (high bits all zero) */
3058 ttbr_select = 0;
3059 } else if (t1sz && !extract32(~address, 32 - t1sz, t1sz)) {
3060 /* there is a ttbr1 region and we are in it (high bits all one) */
3061 ttbr_select = 1;
3062 } else if (!t0sz) {
3063 /* ttbr0 region is "everything not in the ttbr1 region" */
3064 ttbr_select = 0;
3065 } else if (!t1sz) {
3066 /* ttbr1 region is "everything not in the ttbr0 region" */
3067 ttbr_select = 1;
3068 } else {
3069 /* in the gap between the two regions, this is a Translation fault */
3070 fault_type = translation_fault;
3071 goto do_fault;
3074 /* Note that QEMU ignores shareability and cacheability attributes,
3075 * so we don't need to do anything with the SH, ORGN, IRGN fields
3076 * in the TTBCR. Similarly, TTBCR:A1 selects whether we get the
3077 * ASID from TTBR0 or TTBR1, but QEMU's TLB doesn't currently
3078 * implement any ASID-like capability so we can ignore it (instead
3079 * we will always flush the TLB any time the ASID is changed).
3081 if (ttbr_select == 0) {
3082 ttbr = ((uint64_t)env->cp15.c2_base0_hi << 32) | env->cp15.c2_base0;
3083 epd = extract32(env->cp15.c2_control, 7, 1);
3084 tsz = t0sz;
3085 } else {
3086 ttbr = ((uint64_t)env->cp15.c2_base1_hi << 32) | env->cp15.c2_base1;
3087 epd = extract32(env->cp15.c2_control, 23, 1);
3088 tsz = t1sz;
3091 if (epd) {
3092 /* Translation table walk disabled => Translation fault on TLB miss */
3093 goto do_fault;
3096 /* If the region is small enough we will skip straight to a 2nd level
3097 * lookup. This affects the number of bits of the address used in
3098 * combination with the TTBR to find the first descriptor. ('n' here
3099 * matches the usage in the ARM ARM sB3.6.6, where bits [39..n] are
3100 * from the TTBR, [n-1..3] from the vaddr, and [2..0] always zero).
3102 if (tsz > 1) {
3103 level = 2;
3104 n = 14 - tsz;
3105 } else {
3106 n = 5 - tsz;
3109 /* Clear the vaddr bits which aren't part of the within-region address,
3110 * so that we don't have to special case things when calculating the
3111 * first descriptor address.
3113 address &= (0xffffffffU >> tsz);
3115 /* Now we can extract the actual base address from the TTBR */
3116 descaddr = extract64(ttbr, 0, 40);
3117 descaddr &= ~((1ULL << n) - 1);
3119 tableattrs = 0;
3120 for (;;) {
3121 uint64_t descriptor;
3123 descaddr |= ((address >> (9 * (4 - level))) & 0xff8);
3124 descriptor = ldq_phys(descaddr);
3125 if (!(descriptor & 1) ||
3126 (!(descriptor & 2) && (level == 3))) {
3127 /* Invalid, or the Reserved level 3 encoding */
3128 goto do_fault;
3130 descaddr = descriptor & 0xfffffff000ULL;
3132 if ((descriptor & 2) && (level < 3)) {
3133 /* Table entry. The top five bits are attributes which may
3134 * propagate down through lower levels of the table (and
3135 * which are all arranged so that 0 means "no effect", so
3136 * we can gather them up by ORing in the bits at each level).
3138 tableattrs |= extract64(descriptor, 59, 5);
3139 level++;
3140 continue;
3142 /* Block entry at level 1 or 2, or page entry at level 3.
3143 * These are basically the same thing, although the number
3144 * of bits we pull in from the vaddr varies.
3146 page_size = (1 << (39 - (9 * level)));
3147 descaddr |= (address & (page_size - 1));
3148 /* Extract attributes from the descriptor and merge with table attrs */
3149 attrs = extract64(descriptor, 2, 10)
3150 | (extract64(descriptor, 52, 12) << 10);
3151 attrs |= extract32(tableattrs, 0, 2) << 11; /* XN, PXN */
3152 attrs |= extract32(tableattrs, 3, 1) << 5; /* APTable[1] => AP[2] */
3153 /* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1
3154 * means "force PL1 access only", which means forcing AP[1] to 0.
3156 if (extract32(tableattrs, 2, 1)) {
3157 attrs &= ~(1 << 4);
3159 /* Since we're always in the Non-secure state, NSTable is ignored. */
3160 break;
3162 /* Here descaddr is the final physical address, and attributes
3163 * are all in attrs.
3165 fault_type = access_fault;
3166 if ((attrs & (1 << 8)) == 0) {
3167 /* Access flag */
3168 goto do_fault;
3170 fault_type = permission_fault;
3171 if (is_user && !(attrs & (1 << 4))) {
3172 /* Unprivileged access not enabled */
3173 goto do_fault;
3175 *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
3176 if (attrs & (1 << 12) || (!is_user && (attrs & (1 << 11)))) {
3177 /* XN or PXN */
3178 if (access_type == 2) {
3179 goto do_fault;
3181 *prot &= ~PAGE_EXEC;
3183 if (attrs & (1 << 5)) {
3184 /* Write access forbidden */
3185 if (access_type == 1) {
3186 goto do_fault;
3188 *prot &= ~PAGE_WRITE;
3191 *phys_ptr = descaddr;
3192 *page_size_ptr = page_size;
3193 return 0;
3195 do_fault:
3196 /* Long-descriptor format IFSR/DFSR value */
3197 return (1 << 9) | (fault_type << 2) | level;
3200 static int get_phys_addr_mpu(CPUARMState *env, uint32_t address,
3201 int access_type, int is_user,
3202 hwaddr *phys_ptr, int *prot)
3204 int n;
3205 uint32_t mask;
3206 uint32_t base;
3208 *phys_ptr = address;
3209 for (n = 7; n >= 0; n--) {
3210 base = env->cp15.c6_region[n];
3211 if ((base & 1) == 0)
3212 continue;
3213 mask = 1 << ((base >> 1) & 0x1f);
3214 /* Keep this shift separate from the above to avoid an
3215 (undefined) << 32. */
3216 mask = (mask << 1) - 1;
3217 if (((base ^ address) & ~mask) == 0)
3218 break;
3220 if (n < 0)
3221 return 2;
3223 if (access_type == 2) {
3224 mask = env->cp15.c5_insn;
3225 } else {
3226 mask = env->cp15.c5_data;
3228 mask = (mask >> (n * 4)) & 0xf;
3229 switch (mask) {
3230 case 0:
3231 return 1;
3232 case 1:
3233 if (is_user)
3234 return 1;
3235 *prot = PAGE_READ | PAGE_WRITE;
3236 break;
3237 case 2:
3238 *prot = PAGE_READ;
3239 if (!is_user)
3240 *prot |= PAGE_WRITE;
3241 break;
3242 case 3:
3243 *prot = PAGE_READ | PAGE_WRITE;
3244 break;
3245 case 5:
3246 if (is_user)
3247 return 1;
3248 *prot = PAGE_READ;
3249 break;
3250 case 6:
3251 *prot = PAGE_READ;
3252 break;
3253 default:
3254 /* Bad permission. */
3255 return 1;
3257 *prot |= PAGE_EXEC;
3258 return 0;
3261 /* get_phys_addr - get the physical address for this virtual address
3263 * Find the physical address corresponding to the given virtual address,
3264 * by doing a translation table walk on MMU based systems or using the
3265 * MPU state on MPU based systems.
3267 * Returns 0 if the translation was successful. Otherwise, phys_ptr,
3268 * prot and page_size are not filled in, and the return value provides
3269 * information on why the translation aborted, in the format of a
3270 * DFSR/IFSR fault register, with the following caveats:
3271 * * we honour the short vs long DFSR format differences.
3272 * * the WnR bit is never set (the caller must do this).
3273 * * for MPU based systems we don't bother to return a full FSR format
3274 * value.
3276 * @env: CPUARMState
3277 * @address: virtual address to get physical address for
3278 * @access_type: 0 for read, 1 for write, 2 for execute
3279 * @is_user: 0 for privileged access, 1 for user
3280 * @phys_ptr: set to the physical address corresponding to the virtual address
3281 * @prot: set to the permissions for the page containing phys_ptr
3282 * @page_size: set to the size of the page containing phys_ptr
3284 static inline int get_phys_addr(CPUARMState *env, uint32_t address,
3285 int access_type, int is_user,
3286 hwaddr *phys_ptr, int *prot,
3287 target_ulong *page_size)
3289 /* Fast Context Switch Extension. */
3290 if (address < 0x02000000)
3291 address += env->cp15.c13_fcse;
3293 if ((env->cp15.c1_sys & 1) == 0) {
3294 /* MMU/MPU disabled. */
3295 *phys_ptr = address;
3296 *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
3297 *page_size = TARGET_PAGE_SIZE;
3298 return 0;
3299 } else if (arm_feature(env, ARM_FEATURE_MPU)) {
3300 *page_size = TARGET_PAGE_SIZE;
3301 return get_phys_addr_mpu(env, address, access_type, is_user, phys_ptr,
3302 prot);
3303 } else if (extended_addresses_enabled(env)) {
3304 return get_phys_addr_lpae(env, address, access_type, is_user, phys_ptr,
3305 prot, page_size);
3306 } else if (env->cp15.c1_sys & (1 << 23)) {
3307 return get_phys_addr_v6(env, address, access_type, is_user, phys_ptr,
3308 prot, page_size);
3309 } else {
3310 return get_phys_addr_v5(env, address, access_type, is_user, phys_ptr,
3311 prot, page_size);
3315 int cpu_arm_handle_mmu_fault (CPUARMState *env, target_ulong address,
3316 int access_type, int mmu_idx)
3318 hwaddr phys_addr;
3319 target_ulong page_size;
3320 int prot;
3321 int ret, is_user;
3323 is_user = mmu_idx == MMU_USER_IDX;
3324 ret = get_phys_addr(env, address, access_type, is_user, &phys_addr, &prot,
3325 &page_size);
3326 if (ret == 0) {
3327 /* Map a single [sub]page. */
3328 phys_addr &= ~(hwaddr)0x3ff;
3329 address &= ~(uint32_t)0x3ff;
3330 tlb_set_page (env, address, phys_addr, prot, mmu_idx, page_size);
3331 return 0;
3334 if (access_type == 2) {
3335 env->cp15.c5_insn = ret;
3336 env->cp15.c6_insn = address;
3337 env->exception_index = EXCP_PREFETCH_ABORT;
3338 } else {
3339 env->cp15.c5_data = ret;
3340 if (access_type == 1 && arm_feature(env, ARM_FEATURE_V6))
3341 env->cp15.c5_data |= (1 << 11);
3342 env->cp15.c6_data = address;
3343 env->exception_index = EXCP_DATA_ABORT;
3345 return 1;
3348 hwaddr arm_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
3350 ARMCPU *cpu = ARM_CPU(cs);
3351 hwaddr phys_addr;
3352 target_ulong page_size;
3353 int prot;
3354 int ret;
3356 ret = get_phys_addr(&cpu->env, addr, 0, 0, &phys_addr, &prot, &page_size);
3358 if (ret != 0) {
3359 return -1;
3362 return phys_addr;
3365 void HELPER(set_r13_banked)(CPUARMState *env, uint32_t mode, uint32_t val)
3367 if ((env->uncached_cpsr & CPSR_M) == mode) {
3368 env->regs[13] = val;
3369 } else {
3370 env->banked_r13[bank_number(mode)] = val;
3374 uint32_t HELPER(get_r13_banked)(CPUARMState *env, uint32_t mode)
3376 if ((env->uncached_cpsr & CPSR_M) == mode) {
3377 return env->regs[13];
3378 } else {
3379 return env->banked_r13[bank_number(mode)];
3383 uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg)
3385 switch (reg) {
3386 case 0: /* APSR */
3387 return xpsr_read(env) & 0xf8000000;
3388 case 1: /* IAPSR */
3389 return xpsr_read(env) & 0xf80001ff;
3390 case 2: /* EAPSR */
3391 return xpsr_read(env) & 0xff00fc00;
3392 case 3: /* xPSR */
3393 return xpsr_read(env) & 0xff00fdff;
3394 case 5: /* IPSR */
3395 return xpsr_read(env) & 0x000001ff;
3396 case 6: /* EPSR */
3397 return xpsr_read(env) & 0x0700fc00;
3398 case 7: /* IEPSR */
3399 return xpsr_read(env) & 0x0700edff;
3400 case 8: /* MSP */
3401 return env->v7m.current_sp ? env->v7m.other_sp : env->regs[13];
3402 case 9: /* PSP */
3403 return env->v7m.current_sp ? env->regs[13] : env->v7m.other_sp;
3404 case 16: /* PRIMASK */
3405 return (env->uncached_cpsr & CPSR_I) != 0;
3406 case 17: /* BASEPRI */
3407 case 18: /* BASEPRI_MAX */
3408 return env->v7m.basepri;
3409 case 19: /* FAULTMASK */
3410 return (env->uncached_cpsr & CPSR_F) != 0;
3411 case 20: /* CONTROL */
3412 return env->v7m.control;
3413 default:
3414 /* ??? For debugging only. */
3415 cpu_abort(env, "Unimplemented system register read (%d)\n", reg);
3416 return 0;
3420 void HELPER(v7m_msr)(CPUARMState *env, uint32_t reg, uint32_t val)
3422 switch (reg) {
3423 case 0: /* APSR */
3424 xpsr_write(env, val, 0xf8000000);
3425 break;
3426 case 1: /* IAPSR */
3427 xpsr_write(env, val, 0xf8000000);
3428 break;
3429 case 2: /* EAPSR */
3430 xpsr_write(env, val, 0xfe00fc00);
3431 break;
3432 case 3: /* xPSR */
3433 xpsr_write(env, val, 0xfe00fc00);
3434 break;
3435 case 5: /* IPSR */
3436 /* IPSR bits are readonly. */
3437 break;
3438 case 6: /* EPSR */
3439 xpsr_write(env, val, 0x0600fc00);
3440 break;
3441 case 7: /* IEPSR */
3442 xpsr_write(env, val, 0x0600fc00);
3443 break;
3444 case 8: /* MSP */
3445 if (env->v7m.current_sp)
3446 env->v7m.other_sp = val;
3447 else
3448 env->regs[13] = val;
3449 break;
3450 case 9: /* PSP */
3451 if (env->v7m.current_sp)
3452 env->regs[13] = val;
3453 else
3454 env->v7m.other_sp = val;
3455 break;
3456 case 16: /* PRIMASK */
3457 if (val & 1)
3458 env->uncached_cpsr |= CPSR_I;
3459 else
3460 env->uncached_cpsr &= ~CPSR_I;
3461 break;
3462 case 17: /* BASEPRI */
3463 env->v7m.basepri = val & 0xff;
3464 break;
3465 case 18: /* BASEPRI_MAX */
3466 val &= 0xff;
3467 if (val != 0 && (val < env->v7m.basepri || env->v7m.basepri == 0))
3468 env->v7m.basepri = val;
3469 break;
3470 case 19: /* FAULTMASK */
3471 if (val & 1)
3472 env->uncached_cpsr |= CPSR_F;
3473 else
3474 env->uncached_cpsr &= ~CPSR_F;
3475 break;
3476 case 20: /* CONTROL */
3477 env->v7m.control = val & 3;
3478 switch_v7m_sp(env, (val & 2) != 0);
3479 break;
3480 default:
3481 /* ??? For debugging only. */
3482 cpu_abort(env, "Unimplemented system register write (%d)\n", reg);
3483 return;
3487 #endif
3489 /* Note that signed overflow is undefined in C. The following routines are
3490 careful to use unsigned types where modulo arithmetic is required.
3491 Failure to do so _will_ break on newer gcc. */
3493 /* Signed saturating arithmetic. */
3495 /* Perform 16-bit signed saturating addition. */
3496 static inline uint16_t add16_sat(uint16_t a, uint16_t b)
3498 uint16_t res;
3500 res = a + b;
3501 if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) {
3502 if (a & 0x8000)
3503 res = 0x8000;
3504 else
3505 res = 0x7fff;
3507 return res;
3510 /* Perform 8-bit signed saturating addition. */
3511 static inline uint8_t add8_sat(uint8_t a, uint8_t b)
3513 uint8_t res;
3515 res = a + b;
3516 if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) {
3517 if (a & 0x80)
3518 res = 0x80;
3519 else
3520 res = 0x7f;
3522 return res;
3525 /* Perform 16-bit signed saturating subtraction. */
3526 static inline uint16_t sub16_sat(uint16_t a, uint16_t b)
3528 uint16_t res;
3530 res = a - b;
3531 if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) {
3532 if (a & 0x8000)
3533 res = 0x8000;
3534 else
3535 res = 0x7fff;
3537 return res;
3540 /* Perform 8-bit signed saturating subtraction. */
3541 static inline uint8_t sub8_sat(uint8_t a, uint8_t b)
3543 uint8_t res;
3545 res = a - b;
3546 if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) {
3547 if (a & 0x80)
3548 res = 0x80;
3549 else
3550 res = 0x7f;
3552 return res;
3555 #define ADD16(a, b, n) RESULT(add16_sat(a, b), n, 16);
3556 #define SUB16(a, b, n) RESULT(sub16_sat(a, b), n, 16);
3557 #define ADD8(a, b, n) RESULT(add8_sat(a, b), n, 8);
3558 #define SUB8(a, b, n) RESULT(sub8_sat(a, b), n, 8);
3559 #define PFX q
3561 #include "op_addsub.h"
3563 /* Unsigned saturating arithmetic. */
3564 static inline uint16_t add16_usat(uint16_t a, uint16_t b)
3566 uint16_t res;
3567 res = a + b;
3568 if (res < a)
3569 res = 0xffff;
3570 return res;
3573 static inline uint16_t sub16_usat(uint16_t a, uint16_t b)
3575 if (a > b)
3576 return a - b;
3577 else
3578 return 0;
3581 static inline uint8_t add8_usat(uint8_t a, uint8_t b)
3583 uint8_t res;
3584 res = a + b;
3585 if (res < a)
3586 res = 0xff;
3587 return res;
3590 static inline uint8_t sub8_usat(uint8_t a, uint8_t b)
3592 if (a > b)
3593 return a - b;
3594 else
3595 return 0;
3598 #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16);
3599 #define SUB16(a, b, n) RESULT(sub16_usat(a, b), n, 16);
3600 #define ADD8(a, b, n) RESULT(add8_usat(a, b), n, 8);
3601 #define SUB8(a, b, n) RESULT(sub8_usat(a, b), n, 8);
3602 #define PFX uq
3604 #include "op_addsub.h"
3606 /* Signed modulo arithmetic. */
3607 #define SARITH16(a, b, n, op) do { \
3608 int32_t sum; \
3609 sum = (int32_t)(int16_t)(a) op (int32_t)(int16_t)(b); \
3610 RESULT(sum, n, 16); \
3611 if (sum >= 0) \
3612 ge |= 3 << (n * 2); \
3613 } while(0)
3615 #define SARITH8(a, b, n, op) do { \
3616 int32_t sum; \
3617 sum = (int32_t)(int8_t)(a) op (int32_t)(int8_t)(b); \
3618 RESULT(sum, n, 8); \
3619 if (sum >= 0) \
3620 ge |= 1 << n; \
3621 } while(0)
3624 #define ADD16(a, b, n) SARITH16(a, b, n, +)
3625 #define SUB16(a, b, n) SARITH16(a, b, n, -)
3626 #define ADD8(a, b, n) SARITH8(a, b, n, +)
3627 #define SUB8(a, b, n) SARITH8(a, b, n, -)
3628 #define PFX s
3629 #define ARITH_GE
3631 #include "op_addsub.h"
3633 /* Unsigned modulo arithmetic. */
3634 #define ADD16(a, b, n) do { \
3635 uint32_t sum; \
3636 sum = (uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b); \
3637 RESULT(sum, n, 16); \
3638 if ((sum >> 16) == 1) \
3639 ge |= 3 << (n * 2); \
3640 } while(0)
3642 #define ADD8(a, b, n) do { \
3643 uint32_t sum; \
3644 sum = (uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b); \
3645 RESULT(sum, n, 8); \
3646 if ((sum >> 8) == 1) \
3647 ge |= 1 << n; \
3648 } while(0)
3650 #define SUB16(a, b, n) do { \
3651 uint32_t sum; \
3652 sum = (uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b); \
3653 RESULT(sum, n, 16); \
3654 if ((sum >> 16) == 0) \
3655 ge |= 3 << (n * 2); \
3656 } while(0)
3658 #define SUB8(a, b, n) do { \
3659 uint32_t sum; \
3660 sum = (uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b); \
3661 RESULT(sum, n, 8); \
3662 if ((sum >> 8) == 0) \
3663 ge |= 1 << n; \
3664 } while(0)
3666 #define PFX u
3667 #define ARITH_GE
3669 #include "op_addsub.h"
3671 /* Halved signed arithmetic. */
3672 #define ADD16(a, b, n) \
3673 RESULT(((int32_t)(int16_t)(a) + (int32_t)(int16_t)(b)) >> 1, n, 16)
3674 #define SUB16(a, b, n) \
3675 RESULT(((int32_t)(int16_t)(a) - (int32_t)(int16_t)(b)) >> 1, n, 16)
3676 #define ADD8(a, b, n) \
3677 RESULT(((int32_t)(int8_t)(a) + (int32_t)(int8_t)(b)) >> 1, n, 8)
3678 #define SUB8(a, b, n) \
3679 RESULT(((int32_t)(int8_t)(a) - (int32_t)(int8_t)(b)) >> 1, n, 8)
3680 #define PFX sh
3682 #include "op_addsub.h"
3684 /* Halved unsigned arithmetic. */
3685 #define ADD16(a, b, n) \
3686 RESULT(((uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b)) >> 1, n, 16)
3687 #define SUB16(a, b, n) \
3688 RESULT(((uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b)) >> 1, n, 16)
3689 #define ADD8(a, b, n) \
3690 RESULT(((uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b)) >> 1, n, 8)
3691 #define SUB8(a, b, n) \
3692 RESULT(((uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b)) >> 1, n, 8)
3693 #define PFX uh
3695 #include "op_addsub.h"
3697 static inline uint8_t do_usad(uint8_t a, uint8_t b)
3699 if (a > b)
3700 return a - b;
3701 else
3702 return b - a;
3705 /* Unsigned sum of absolute byte differences. */
3706 uint32_t HELPER(usad8)(uint32_t a, uint32_t b)
3708 uint32_t sum;
3709 sum = do_usad(a, b);
3710 sum += do_usad(a >> 8, b >> 8);
3711 sum += do_usad(a >> 16, b >>16);
3712 sum += do_usad(a >> 24, b >> 24);
3713 return sum;
3716 /* For ARMv6 SEL instruction. */
3717 uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b)
3719 uint32_t mask;
3721 mask = 0;
3722 if (flags & 1)
3723 mask |= 0xff;
3724 if (flags & 2)
3725 mask |= 0xff00;
3726 if (flags & 4)
3727 mask |= 0xff0000;
3728 if (flags & 8)
3729 mask |= 0xff000000;
3730 return (a & mask) | (b & ~mask);
3733 /* VFP support. We follow the convention used for VFP instructions:
3734 Single precision routines have a "s" suffix, double precision a
3735 "d" suffix. */
3737 /* Convert host exception flags to vfp form. */
3738 static inline int vfp_exceptbits_from_host(int host_bits)
3740 int target_bits = 0;
3742 if (host_bits & float_flag_invalid)
3743 target_bits |= 1;
3744 if (host_bits & float_flag_divbyzero)
3745 target_bits |= 2;
3746 if (host_bits & float_flag_overflow)
3747 target_bits |= 4;
3748 if (host_bits & (float_flag_underflow | float_flag_output_denormal))
3749 target_bits |= 8;
3750 if (host_bits & float_flag_inexact)
3751 target_bits |= 0x10;
3752 if (host_bits & float_flag_input_denormal)
3753 target_bits |= 0x80;
3754 return target_bits;
3757 uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
3759 int i;
3760 uint32_t fpscr;
3762 fpscr = (env->vfp.xregs[ARM_VFP_FPSCR] & 0xffc8ffff)
3763 | (env->vfp.vec_len << 16)
3764 | (env->vfp.vec_stride << 20);
3765 i = get_float_exception_flags(&env->vfp.fp_status);
3766 i |= get_float_exception_flags(&env->vfp.standard_fp_status);
3767 fpscr |= vfp_exceptbits_from_host(i);
3768 return fpscr;
3771 uint32_t vfp_get_fpscr(CPUARMState *env)
3773 return HELPER(vfp_get_fpscr)(env);
3776 /* Convert vfp exception flags to target form. */
3777 static inline int vfp_exceptbits_to_host(int target_bits)
3779 int host_bits = 0;
3781 if (target_bits & 1)
3782 host_bits |= float_flag_invalid;
3783 if (target_bits & 2)
3784 host_bits |= float_flag_divbyzero;
3785 if (target_bits & 4)
3786 host_bits |= float_flag_overflow;
3787 if (target_bits & 8)
3788 host_bits |= float_flag_underflow;
3789 if (target_bits & 0x10)
3790 host_bits |= float_flag_inexact;
3791 if (target_bits & 0x80)
3792 host_bits |= float_flag_input_denormal;
3793 return host_bits;
3796 void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val)
3798 int i;
3799 uint32_t changed;
3801 changed = env->vfp.xregs[ARM_VFP_FPSCR];
3802 env->vfp.xregs[ARM_VFP_FPSCR] = (val & 0xffc8ffff);
3803 env->vfp.vec_len = (val >> 16) & 7;
3804 env->vfp.vec_stride = (val >> 20) & 3;
3806 changed ^= val;
3807 if (changed & (3 << 22)) {
3808 i = (val >> 22) & 3;
3809 switch (i) {
3810 case FPROUNDING_TIEEVEN:
3811 i = float_round_nearest_even;
3812 break;
3813 case FPROUNDING_POSINF:
3814 i = float_round_up;
3815 break;
3816 case FPROUNDING_NEGINF:
3817 i = float_round_down;
3818 break;
3819 case FPROUNDING_ZERO:
3820 i = float_round_to_zero;
3821 break;
3823 set_float_rounding_mode(i, &env->vfp.fp_status);
3825 if (changed & (1 << 24)) {
3826 set_flush_to_zero((val & (1 << 24)) != 0, &env->vfp.fp_status);
3827 set_flush_inputs_to_zero((val & (1 << 24)) != 0, &env->vfp.fp_status);
3829 if (changed & (1 << 25))
3830 set_default_nan_mode((val & (1 << 25)) != 0, &env->vfp.fp_status);
3832 i = vfp_exceptbits_to_host(val);
3833 set_float_exception_flags(i, &env->vfp.fp_status);
3834 set_float_exception_flags(0, &env->vfp.standard_fp_status);
3837 void vfp_set_fpscr(CPUARMState *env, uint32_t val)
3839 HELPER(vfp_set_fpscr)(env, val);
3842 #define VFP_HELPER(name, p) HELPER(glue(glue(vfp_,name),p))
3844 #define VFP_BINOP(name) \
3845 float32 VFP_HELPER(name, s)(float32 a, float32 b, void *fpstp) \
3847 float_status *fpst = fpstp; \
3848 return float32_ ## name(a, b, fpst); \
3850 float64 VFP_HELPER(name, d)(float64 a, float64 b, void *fpstp) \
3852 float_status *fpst = fpstp; \
3853 return float64_ ## name(a, b, fpst); \
3855 VFP_BINOP(add)
3856 VFP_BINOP(sub)
3857 VFP_BINOP(mul)
3858 VFP_BINOP(div)
3859 VFP_BINOP(min)
3860 VFP_BINOP(max)
3861 VFP_BINOP(minnum)
3862 VFP_BINOP(maxnum)
3863 #undef VFP_BINOP
3865 float32 VFP_HELPER(neg, s)(float32 a)
3867 return float32_chs(a);
3870 float64 VFP_HELPER(neg, d)(float64 a)
3872 return float64_chs(a);
3875 float32 VFP_HELPER(abs, s)(float32 a)
3877 return float32_abs(a);
3880 float64 VFP_HELPER(abs, d)(float64 a)
3882 return float64_abs(a);
3885 float32 VFP_HELPER(sqrt, s)(float32 a, CPUARMState *env)
3887 return float32_sqrt(a, &env->vfp.fp_status);
3890 float64 VFP_HELPER(sqrt, d)(float64 a, CPUARMState *env)
3892 return float64_sqrt(a, &env->vfp.fp_status);
3895 /* XXX: check quiet/signaling case */
3896 #define DO_VFP_cmp(p, type) \
3897 void VFP_HELPER(cmp, p)(type a, type b, CPUARMState *env) \
3899 uint32_t flags; \
3900 switch(type ## _compare_quiet(a, b, &env->vfp.fp_status)) { \
3901 case 0: flags = 0x6; break; \
3902 case -1: flags = 0x8; break; \
3903 case 1: flags = 0x2; break; \
3904 default: case 2: flags = 0x3; break; \
3906 env->vfp.xregs[ARM_VFP_FPSCR] = (flags << 28) \
3907 | (env->vfp.xregs[ARM_VFP_FPSCR] & 0x0fffffff); \
3909 void VFP_HELPER(cmpe, p)(type a, type b, CPUARMState *env) \
3911 uint32_t flags; \
3912 switch(type ## _compare(a, b, &env->vfp.fp_status)) { \
3913 case 0: flags = 0x6; break; \
3914 case -1: flags = 0x8; break; \
3915 case 1: flags = 0x2; break; \
3916 default: case 2: flags = 0x3; break; \
3918 env->vfp.xregs[ARM_VFP_FPSCR] = (flags << 28) \
3919 | (env->vfp.xregs[ARM_VFP_FPSCR] & 0x0fffffff); \
3921 DO_VFP_cmp(s, float32)
3922 DO_VFP_cmp(d, float64)
3923 #undef DO_VFP_cmp
3925 /* Integer to float and float to integer conversions */
3927 #define CONV_ITOF(name, fsz, sign) \
3928 float##fsz HELPER(name)(uint32_t x, void *fpstp) \
3930 float_status *fpst = fpstp; \
3931 return sign##int32_to_##float##fsz((sign##int32_t)x, fpst); \
3934 #define CONV_FTOI(name, fsz, sign, round) \
3935 uint32_t HELPER(name)(float##fsz x, void *fpstp) \
3937 float_status *fpst = fpstp; \
3938 if (float##fsz##_is_any_nan(x)) { \
3939 float_raise(float_flag_invalid, fpst); \
3940 return 0; \
3942 return float##fsz##_to_##sign##int32##round(x, fpst); \
3945 #define FLOAT_CONVS(name, p, fsz, sign) \
3946 CONV_ITOF(vfp_##name##to##p, fsz, sign) \
3947 CONV_FTOI(vfp_to##name##p, fsz, sign, ) \
3948 CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero)
3950 FLOAT_CONVS(si, s, 32, )
3951 FLOAT_CONVS(si, d, 64, )
3952 FLOAT_CONVS(ui, s, 32, u)
3953 FLOAT_CONVS(ui, d, 64, u)
3955 #undef CONV_ITOF
3956 #undef CONV_FTOI
3957 #undef FLOAT_CONVS
3959 /* floating point conversion */
3960 float64 VFP_HELPER(fcvtd, s)(float32 x, CPUARMState *env)
3962 float64 r = float32_to_float64(x, &env->vfp.fp_status);
3963 /* ARM requires that S<->D conversion of any kind of NaN generates
3964 * a quiet NaN by forcing the most significant frac bit to 1.
3966 return float64_maybe_silence_nan(r);
3969 float32 VFP_HELPER(fcvts, d)(float64 x, CPUARMState *env)
3971 float32 r = float64_to_float32(x, &env->vfp.fp_status);
3972 /* ARM requires that S<->D conversion of any kind of NaN generates
3973 * a quiet NaN by forcing the most significant frac bit to 1.
3975 return float32_maybe_silence_nan(r);
3978 /* VFP3 fixed point conversion. */
3979 #define VFP_CONV_FIX_FLOAT(name, p, fsz, isz, itype) \
3980 float##fsz HELPER(vfp_##name##to##p)(uint##isz##_t x, uint32_t shift, \
3981 void *fpstp) \
3983 float_status *fpst = fpstp; \
3984 float##fsz tmp; \
3985 tmp = itype##_to_##float##fsz(x, fpst); \
3986 return float##fsz##_scalbn(tmp, -(int)shift, fpst); \
3989 /* Notice that we want only input-denormal exception flags from the
3990 * scalbn operation: the other possible flags (overflow+inexact if
3991 * we overflow to infinity, output-denormal) aren't correct for the
3992 * complete scale-and-convert operation.
3994 #define VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, isz, itype, round) \
3995 uint##isz##_t HELPER(vfp_to##name##p##round)(float##fsz x, \
3996 uint32_t shift, \
3997 void *fpstp) \
3999 float_status *fpst = fpstp; \
4000 int old_exc_flags = get_float_exception_flags(fpst); \
4001 float##fsz tmp; \
4002 if (float##fsz##_is_any_nan(x)) { \
4003 float_raise(float_flag_invalid, fpst); \
4004 return 0; \
4006 tmp = float##fsz##_scalbn(x, shift, fpst); \
4007 old_exc_flags |= get_float_exception_flags(fpst) \
4008 & float_flag_input_denormal; \
4009 set_float_exception_flags(old_exc_flags, fpst); \
4010 return float##fsz##_to_##itype##round(tmp, fpst); \
4013 #define VFP_CONV_FIX(name, p, fsz, isz, itype) \
4014 VFP_CONV_FIX_FLOAT(name, p, fsz, isz, itype) \
4015 VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, isz, itype, _round_to_zero) \
4016 VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, isz, itype, )
4018 #define VFP_CONV_FIX_A64(name, p, fsz, isz, itype) \
4019 VFP_CONV_FIX_FLOAT(name, p, fsz, isz, itype) \
4020 VFP_CONV_FLOAT_FIX_ROUND(name, p, fsz, isz, itype, )
4022 VFP_CONV_FIX(sh, d, 64, 64, int16)
4023 VFP_CONV_FIX(sl, d, 64, 64, int32)
4024 VFP_CONV_FIX_A64(sq, d, 64, 64, int64)
4025 VFP_CONV_FIX(uh, d, 64, 64, uint16)
4026 VFP_CONV_FIX(ul, d, 64, 64, uint32)
4027 VFP_CONV_FIX_A64(uq, d, 64, 64, uint64)
4028 VFP_CONV_FIX(sh, s, 32, 32, int16)
4029 VFP_CONV_FIX(sl, s, 32, 32, int32)
4030 VFP_CONV_FIX_A64(sq, s, 32, 64, int64)
4031 VFP_CONV_FIX(uh, s, 32, 32, uint16)
4032 VFP_CONV_FIX(ul, s, 32, 32, uint32)
4033 VFP_CONV_FIX_A64(uq, s, 32, 64, uint64)
4034 #undef VFP_CONV_FIX
4035 #undef VFP_CONV_FIX_FLOAT
4036 #undef VFP_CONV_FLOAT_FIX_ROUND
4038 /* Set the current fp rounding mode and return the old one.
4039 * The argument is a softfloat float_round_ value.
4041 uint32_t HELPER(set_rmode)(uint32_t rmode, CPUARMState *env)
4043 float_status *fp_status = &env->vfp.fp_status;
4045 uint32_t prev_rmode = get_float_rounding_mode(fp_status);
4046 set_float_rounding_mode(rmode, fp_status);
4048 return prev_rmode;
4051 /* Half precision conversions. */
4052 static float32 do_fcvt_f16_to_f32(uint32_t a, CPUARMState *env, float_status *s)
4054 int ieee = (env->vfp.xregs[ARM_VFP_FPSCR] & (1 << 26)) == 0;
4055 float32 r = float16_to_float32(make_float16(a), ieee, s);
4056 if (ieee) {
4057 return float32_maybe_silence_nan(r);
4059 return r;
4062 static uint32_t do_fcvt_f32_to_f16(float32 a, CPUARMState *env, float_status *s)
4064 int ieee = (env->vfp.xregs[ARM_VFP_FPSCR] & (1 << 26)) == 0;
4065 float16 r = float32_to_float16(a, ieee, s);
4066 if (ieee) {
4067 r = float16_maybe_silence_nan(r);
4069 return float16_val(r);
4072 float32 HELPER(neon_fcvt_f16_to_f32)(uint32_t a, CPUARMState *env)
4074 return do_fcvt_f16_to_f32(a, env, &env->vfp.standard_fp_status);
4077 uint32_t HELPER(neon_fcvt_f32_to_f16)(float32 a, CPUARMState *env)
4079 return do_fcvt_f32_to_f16(a, env, &env->vfp.standard_fp_status);
4082 float32 HELPER(vfp_fcvt_f16_to_f32)(uint32_t a, CPUARMState *env)
4084 return do_fcvt_f16_to_f32(a, env, &env->vfp.fp_status);
4087 uint32_t HELPER(vfp_fcvt_f32_to_f16)(float32 a, CPUARMState *env)
4089 return do_fcvt_f32_to_f16(a, env, &env->vfp.fp_status);
4092 float64 HELPER(vfp_fcvt_f16_to_f64)(uint32_t a, CPUARMState *env)
4094 int ieee = (env->vfp.xregs[ARM_VFP_FPSCR] & (1 << 26)) == 0;
4095 float64 r = float16_to_float64(make_float16(a), ieee, &env->vfp.fp_status);
4096 if (ieee) {
4097 return float64_maybe_silence_nan(r);
4099 return r;
4102 uint32_t HELPER(vfp_fcvt_f64_to_f16)(float64 a, CPUARMState *env)
4104 int ieee = (env->vfp.xregs[ARM_VFP_FPSCR] & (1 << 26)) == 0;
4105 float16 r = float64_to_float16(a, ieee, &env->vfp.fp_status);
4106 if (ieee) {
4107 r = float16_maybe_silence_nan(r);
4109 return float16_val(r);
4112 #define float32_two make_float32(0x40000000)
4113 #define float32_three make_float32(0x40400000)
4114 #define float32_one_point_five make_float32(0x3fc00000)
4116 float32 HELPER(recps_f32)(float32 a, float32 b, CPUARMState *env)
4118 float_status *s = &env->vfp.standard_fp_status;
4119 if ((float32_is_infinity(a) && float32_is_zero_or_denormal(b)) ||
4120 (float32_is_infinity(b) && float32_is_zero_or_denormal(a))) {
4121 if (!(float32_is_zero(a) || float32_is_zero(b))) {
4122 float_raise(float_flag_input_denormal, s);
4124 return float32_two;
4126 return float32_sub(float32_two, float32_mul(a, b, s), s);
4129 float32 HELPER(rsqrts_f32)(float32 a, float32 b, CPUARMState *env)
4131 float_status *s = &env->vfp.standard_fp_status;
4132 float32 product;
4133 if ((float32_is_infinity(a) && float32_is_zero_or_denormal(b)) ||
4134 (float32_is_infinity(b) && float32_is_zero_or_denormal(a))) {
4135 if (!(float32_is_zero(a) || float32_is_zero(b))) {
4136 float_raise(float_flag_input_denormal, s);
4138 return float32_one_point_five;
4140 product = float32_mul(a, b, s);
4141 return float32_div(float32_sub(float32_three, product, s), float32_two, s);
4144 /* NEON helpers. */
4146 /* Constants 256 and 512 are used in some helpers; we avoid relying on
4147 * int->float conversions at run-time. */
4148 #define float64_256 make_float64(0x4070000000000000LL)
4149 #define float64_512 make_float64(0x4080000000000000LL)
4151 /* The algorithm that must be used to calculate the estimate
4152 * is specified by the ARM ARM.
4154 static float64 recip_estimate(float64 a, CPUARMState *env)
4156 /* These calculations mustn't set any fp exception flags,
4157 * so we use a local copy of the fp_status.
4159 float_status dummy_status = env->vfp.standard_fp_status;
4160 float_status *s = &dummy_status;
4161 /* q = (int)(a * 512.0) */
4162 float64 q = float64_mul(float64_512, a, s);
4163 int64_t q_int = float64_to_int64_round_to_zero(q, s);
4165 /* r = 1.0 / (((double)q + 0.5) / 512.0) */
4166 q = int64_to_float64(q_int, s);
4167 q = float64_add(q, float64_half, s);
4168 q = float64_div(q, float64_512, s);
4169 q = float64_div(float64_one, q, s);
4171 /* s = (int)(256.0 * r + 0.5) */
4172 q = float64_mul(q, float64_256, s);
4173 q = float64_add(q, float64_half, s);
4174 q_int = float64_to_int64_round_to_zero(q, s);
4176 /* return (double)s / 256.0 */
4177 return float64_div(int64_to_float64(q_int, s), float64_256, s);
4180 float32 HELPER(recpe_f32)(float32 a, CPUARMState *env)
4182 float_status *s = &env->vfp.standard_fp_status;
4183 float64 f64;
4184 uint32_t val32 = float32_val(a);
4186 int result_exp;
4187 int a_exp = (val32 & 0x7f800000) >> 23;
4188 int sign = val32 & 0x80000000;
4190 if (float32_is_any_nan(a)) {
4191 if (float32_is_signaling_nan(a)) {
4192 float_raise(float_flag_invalid, s);
4194 return float32_default_nan;
4195 } else if (float32_is_infinity(a)) {
4196 return float32_set_sign(float32_zero, float32_is_neg(a));
4197 } else if (float32_is_zero_or_denormal(a)) {
4198 if (!float32_is_zero(a)) {
4199 float_raise(float_flag_input_denormal, s);
4201 float_raise(float_flag_divbyzero, s);
4202 return float32_set_sign(float32_infinity, float32_is_neg(a));
4203 } else if (a_exp >= 253) {
4204 float_raise(float_flag_underflow, s);
4205 return float32_set_sign(float32_zero, float32_is_neg(a));
4208 f64 = make_float64((0x3feULL << 52)
4209 | ((int64_t)(val32 & 0x7fffff) << 29));
4211 result_exp = 253 - a_exp;
4213 f64 = recip_estimate(f64, env);
4215 val32 = sign
4216 | ((result_exp & 0xff) << 23)
4217 | ((float64_val(f64) >> 29) & 0x7fffff);
4218 return make_float32(val32);
4221 /* The algorithm that must be used to calculate the estimate
4222 * is specified by the ARM ARM.
4224 static float64 recip_sqrt_estimate(float64 a, CPUARMState *env)
4226 /* These calculations mustn't set any fp exception flags,
4227 * so we use a local copy of the fp_status.
4229 float_status dummy_status = env->vfp.standard_fp_status;
4230 float_status *s = &dummy_status;
4231 float64 q;
4232 int64_t q_int;
4234 if (float64_lt(a, float64_half, s)) {
4235 /* range 0.25 <= a < 0.5 */
4237 /* a in units of 1/512 rounded down */
4238 /* q0 = (int)(a * 512.0); */
4239 q = float64_mul(float64_512, a, s);
4240 q_int = float64_to_int64_round_to_zero(q, s);
4242 /* reciprocal root r */
4243 /* r = 1.0 / sqrt(((double)q0 + 0.5) / 512.0); */
4244 q = int64_to_float64(q_int, s);
4245 q = float64_add(q, float64_half, s);
4246 q = float64_div(q, float64_512, s);
4247 q = float64_sqrt(q, s);
4248 q = float64_div(float64_one, q, s);
4249 } else {
4250 /* range 0.5 <= a < 1.0 */
4252 /* a in units of 1/256 rounded down */
4253 /* q1 = (int)(a * 256.0); */
4254 q = float64_mul(float64_256, a, s);
4255 int64_t q_int = float64_to_int64_round_to_zero(q, s);
4257 /* reciprocal root r */
4258 /* r = 1.0 /sqrt(((double)q1 + 0.5) / 256); */
4259 q = int64_to_float64(q_int, s);
4260 q = float64_add(q, float64_half, s);
4261 q = float64_div(q, float64_256, s);
4262 q = float64_sqrt(q, s);
4263 q = float64_div(float64_one, q, s);
4265 /* r in units of 1/256 rounded to nearest */
4266 /* s = (int)(256.0 * r + 0.5); */
4268 q = float64_mul(q, float64_256,s );
4269 q = float64_add(q, float64_half, s);
4270 q_int = float64_to_int64_round_to_zero(q, s);
4272 /* return (double)s / 256.0;*/
4273 return float64_div(int64_to_float64(q_int, s), float64_256, s);
4276 float32 HELPER(rsqrte_f32)(float32 a, CPUARMState *env)
4278 float_status *s = &env->vfp.standard_fp_status;
4279 int result_exp;
4280 float64 f64;
4281 uint32_t val;
4282 uint64_t val64;
4284 val = float32_val(a);
4286 if (float32_is_any_nan(a)) {
4287 if (float32_is_signaling_nan(a)) {
4288 float_raise(float_flag_invalid, s);
4290 return float32_default_nan;
4291 } else if (float32_is_zero_or_denormal(a)) {
4292 if (!float32_is_zero(a)) {
4293 float_raise(float_flag_input_denormal, s);
4295 float_raise(float_flag_divbyzero, s);
4296 return float32_set_sign(float32_infinity, float32_is_neg(a));
4297 } else if (float32_is_neg(a)) {
4298 float_raise(float_flag_invalid, s);
4299 return float32_default_nan;
4300 } else if (float32_is_infinity(a)) {
4301 return float32_zero;
4304 /* Normalize to a double-precision value between 0.25 and 1.0,
4305 * preserving the parity of the exponent. */
4306 if ((val & 0x800000) == 0) {
4307 f64 = make_float64(((uint64_t)(val & 0x80000000) << 32)
4308 | (0x3feULL << 52)
4309 | ((uint64_t)(val & 0x7fffff) << 29));
4310 } else {
4311 f64 = make_float64(((uint64_t)(val & 0x80000000) << 32)
4312 | (0x3fdULL << 52)
4313 | ((uint64_t)(val & 0x7fffff) << 29));
4316 result_exp = (380 - ((val & 0x7f800000) >> 23)) / 2;
4318 f64 = recip_sqrt_estimate(f64, env);
4320 val64 = float64_val(f64);
4322 val = ((result_exp & 0xff) << 23)
4323 | ((val64 >> 29) & 0x7fffff);
4324 return make_float32(val);
4327 uint32_t HELPER(recpe_u32)(uint32_t a, CPUARMState *env)
4329 float64 f64;
4331 if ((a & 0x80000000) == 0) {
4332 return 0xffffffff;
4335 f64 = make_float64((0x3feULL << 52)
4336 | ((int64_t)(a & 0x7fffffff) << 21));
4338 f64 = recip_estimate (f64, env);
4340 return 0x80000000 | ((float64_val(f64) >> 21) & 0x7fffffff);
4343 uint32_t HELPER(rsqrte_u32)(uint32_t a, CPUARMState *env)
4345 float64 f64;
4347 if ((a & 0xc0000000) == 0) {
4348 return 0xffffffff;
4351 if (a & 0x80000000) {
4352 f64 = make_float64((0x3feULL << 52)
4353 | ((uint64_t)(a & 0x7fffffff) << 21));
4354 } else { /* bits 31-30 == '01' */
4355 f64 = make_float64((0x3fdULL << 52)
4356 | ((uint64_t)(a & 0x3fffffff) << 22));
4359 f64 = recip_sqrt_estimate(f64, env);
4361 return 0x80000000 | ((float64_val(f64) >> 21) & 0x7fffffff);
4364 /* VFPv4 fused multiply-accumulate */
4365 float32 VFP_HELPER(muladd, s)(float32 a, float32 b, float32 c, void *fpstp)
4367 float_status *fpst = fpstp;
4368 return float32_muladd(a, b, c, 0, fpst);
4371 float64 VFP_HELPER(muladd, d)(float64 a, float64 b, float64 c, void *fpstp)
4373 float_status *fpst = fpstp;
4374 return float64_muladd(a, b, c, 0, fpst);
4377 /* ARMv8 round to integral */
4378 float32 HELPER(rints_exact)(float32 x, void *fp_status)
4380 return float32_round_to_int(x, fp_status);
4383 float64 HELPER(rintd_exact)(float64 x, void *fp_status)
4385 return float64_round_to_int(x, fp_status);
4388 float32 HELPER(rints)(float32 x, void *fp_status)
4390 int old_flags = get_float_exception_flags(fp_status), new_flags;
4391 float32 ret;
4393 ret = float32_round_to_int(x, fp_status);
4395 /* Suppress any inexact exceptions the conversion produced */
4396 if (!(old_flags & float_flag_inexact)) {
4397 new_flags = get_float_exception_flags(fp_status);
4398 set_float_exception_flags(new_flags & ~float_flag_inexact, fp_status);
4401 return ret;
4404 float64 HELPER(rintd)(float64 x, void *fp_status)
4406 int old_flags = get_float_exception_flags(fp_status), new_flags;
4407 float64 ret;
4409 ret = float64_round_to_int(x, fp_status);
4411 new_flags = get_float_exception_flags(fp_status);
4413 /* Suppress any inexact exceptions the conversion produced */
4414 if (!(old_flags & float_flag_inexact)) {
4415 new_flags = get_float_exception_flags(fp_status);
4416 set_float_exception_flags(new_flags & ~float_flag_inexact, fp_status);
4419 return ret;