Merge tag 'pull-riscv-to-apply-20240806-2' of https://github.com/alistair23/qemu...
[qemu/kevin.git] / hw / char / escc.c
blobd450d70eda1ee195128da5123cdbfc397a46f7f1
1 /*
2 * QEMU ESCC (Z8030/Z8530/Z85C30/SCC/ESCC) serial port emulation
4 * Copyright (c) 2003-2005 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "qemu/osdep.h"
26 #include "hw/irq.h"
27 #include "hw/qdev-properties.h"
28 #include "hw/qdev-properties-system.h"
29 #include "hw/sysbus.h"
30 #include "migration/vmstate.h"
31 #include "qemu/module.h"
32 #include "hw/char/escc.h"
33 #include "ui/console.h"
35 #include "qemu/cutils.h"
36 #include "trace.h"
39 * Chipset docs:
40 * "Z80C30/Z85C30/Z80230/Z85230/Z85233 SCC/ESCC User Manual",
41 * http://www.zilog.com/docs/serial/scc_escc_um.pdf
43 * On Sparc32 this is the serial port, mouse and keyboard part of chip STP2001
44 * (Slave I/O), also produced as NCR89C105. See
45 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
47 * The serial ports implement full AMD AM8530 or Zilog Z8530 chips,
48 * mouse and keyboard ports don't implement all functions and they are
49 * only asynchronous. There is no DMA.
51 * Z85C30 is also used on PowerMacs and m68k Macs.
53 * There are some small differences between Sparc version (sunzilog)
54 * and PowerMac (pmac):
55 * Offset between control and data registers
56 * There is some kind of lockup bug, but we can ignore it
57 * CTS is inverted
58 * DMA on pmac using DBDMA chip
59 * pmac can do IRDA and faster rates, sunzilog can only do 38400
60 * pmac baud rate generator clock is 3.6864 MHz, sunzilog 4.9152 MHz
62 * Linux driver for m68k Macs is the same as for PowerMac (pmac_zilog),
63 * but registers are grouped by type and not by channel:
64 * channel is selected by bit 0 of the address (instead of bit 1)
65 * and register is selected by bit 1 of the address (instead of bit 0).
69 * Modifications:
70 * 2006-Aug-10 Igor Kovalenko : Renamed KBDQueue to SERIOQueue, implemented
71 * serial mouse queue.
72 * Implemented serial mouse protocol.
74 * 2010-May-23 Artyom Tarasenko: Reworked IUS logic
77 #define CHN_C(s) ((s)->chn == escc_chn_b ? 'b' : 'a')
79 #define SERIAL_CTRL 0
80 #define SERIAL_DATA 1
82 #define W_CMD 0
83 #define CMD_PTR_MASK 0x07
84 #define CMD_CMD_MASK 0x38
85 #define CMD_HI 0x08
86 #define CMD_CLR_TXINT 0x28
87 #define CMD_CLR_IUS 0x38
88 #define W_INTR 1
89 #define INTR_INTALL 0x01
90 #define INTR_TXINT 0x02
91 #define INTR_PAR_SPEC 0x04
92 #define INTR_RXMODEMSK 0x18
93 #define INTR_RXINT1ST 0x08
94 #define INTR_RXINTALL 0x10
95 #define INTR_WTRQ_TXRX 0x20
96 #define W_IVEC 2
97 #define W_RXCTRL 3
98 #define RXCTRL_RXEN 0x01
99 #define RXCTRL_HUNT 0x10
100 #define W_TXCTRL1 4
101 #define TXCTRL1_PAREN 0x01
102 #define TXCTRL1_PAREV 0x02
103 #define TXCTRL1_1STOP 0x04
104 #define TXCTRL1_1HSTOP 0x08
105 #define TXCTRL1_2STOP 0x0c
106 #define TXCTRL1_STPMSK 0x0c
107 #define TXCTRL1_CLK1X 0x00
108 #define TXCTRL1_CLK16X 0x40
109 #define TXCTRL1_CLK32X 0x80
110 #define TXCTRL1_CLK64X 0xc0
111 #define TXCTRL1_CLKMSK 0xc0
112 #define W_TXCTRL2 5
113 #define TXCTRL2_TXCRC 0x01
114 #define TXCTRL2_TXEN 0x08
115 #define TXCTRL2_BITMSK 0x60
116 #define TXCTRL2_5BITS 0x00
117 #define TXCTRL2_7BITS 0x20
118 #define TXCTRL2_6BITS 0x40
119 #define TXCTRL2_8BITS 0x60
120 #define W_SYNC1 6
121 #define W_SYNC2 7
122 #define W_TXBUF 8
123 #define W_MINTR 9
124 #define MINTR_VIS 0x01
125 #define MINTR_NV 0x02
126 #define MINTR_STATUSHI 0x10
127 #define MINTR_SOFTIACK 0x20
128 #define MINTR_RST_MASK 0xc0
129 #define MINTR_RST_B 0x40
130 #define MINTR_RST_A 0x80
131 #define MINTR_RST_ALL 0xc0
132 #define W_MISC1 10
133 #define MISC1_ENC_MASK 0x60
134 #define W_CLOCK 11
135 #define CLOCK_TRXC 0x08
136 #define W_BRGLO 12
137 #define W_BRGHI 13
138 #define W_MISC2 14
139 #define MISC2_BRG_EN 0x01
140 #define MISC2_BRG_SRC 0x02
141 #define MISC2_LCL_LOOP 0x10
142 #define MISC2_PLLCMD0 0x20
143 #define MISC2_PLLCMD1 0x40
144 #define MISC2_PLLCMD2 0x80
145 #define W_EXTINT 15
146 #define EXTINT_DCD 0x08
147 #define EXTINT_SYNCINT 0x10
148 #define EXTINT_CTSINT 0x20
149 #define EXTINT_TXUNDRN 0x40
150 #define EXTINT_BRKINT 0x80
152 #define R_STATUS 0
153 #define STATUS_RXAV 0x01
154 #define STATUS_ZERO 0x02
155 #define STATUS_TXEMPTY 0x04
156 #define STATUS_DCD 0x08
157 #define STATUS_SYNC 0x10
158 #define STATUS_CTS 0x20
159 #define STATUS_TXUNDRN 0x40
160 #define STATUS_BRK 0x80
161 #define R_SPEC 1
162 #define SPEC_ALLSENT 0x01
163 #define SPEC_BITS8 0x06
164 #define R_IVEC 2
165 #define IVEC_TXINTB 0x00
166 #define IVEC_LONOINT 0x06
167 #define IVEC_LORXINTA 0x0c
168 #define IVEC_LORXINTB 0x04
169 #define IVEC_LOTXINTA 0x08
170 #define IVEC_HINOINT 0x60
171 #define IVEC_HIRXINTA 0x30
172 #define IVEC_HIRXINTB 0x20
173 #define IVEC_HITXINTA 0x10
174 #define R_INTR 3
175 #define INTR_EXTINTB 0x01
176 #define INTR_TXINTB 0x02
177 #define INTR_RXINTB 0x04
178 #define INTR_EXTINTA 0x08
179 #define INTR_TXINTA 0x10
180 #define INTR_RXINTA 0x20
181 #define R_IPEN 4
182 #define R_TXCTRL1 5
183 #define R_TXCTRL2 6
184 #define R_BC 7
185 #define R_RXBUF 8
186 #define R_RXCTRL 9
187 #define R_MISC 10
188 #define MISC_2CLKMISS 0x40
189 #define R_MISC1 11
190 #define R_BRGLO 12
191 #define R_BRGHI 13
192 #define R_MISC1I 14
193 #define R_EXTINT 15
195 static uint8_t sunkbd_layout_dip_switch(const char *sunkbd_layout);
196 static void handle_kbd_command(ESCCChannelState *s, int val);
197 static int serial_can_receive(void *opaque);
198 static void serial_receive_byte(ESCCChannelState *s, int ch);
200 static int reg_shift(ESCCState *s)
202 return s->bit_swap ? s->it_shift + 1 : s->it_shift;
205 static int chn_shift(ESCCState *s)
207 return s->bit_swap ? s->it_shift : s->it_shift + 1;
210 static void clear_queue(void *opaque)
212 ESCCChannelState *s = opaque;
213 ESCCSERIOQueue *q = &s->queue;
214 q->rptr = q->wptr = q->count = 0;
217 static void put_queue(void *opaque, int b)
219 ESCCChannelState *s = opaque;
220 ESCCSERIOQueue *q = &s->queue;
222 trace_escc_put_queue(CHN_C(s), b);
223 if (q->count >= ESCC_SERIO_QUEUE_SIZE) {
224 return;
226 q->data[q->wptr] = b;
227 if (++q->wptr == ESCC_SERIO_QUEUE_SIZE) {
228 q->wptr = 0;
230 q->count++;
231 serial_receive_byte(s, 0);
234 static uint32_t get_queue(void *opaque)
236 ESCCChannelState *s = opaque;
237 ESCCSERIOQueue *q = &s->queue;
238 int val;
240 if (q->count == 0) {
241 return 0;
242 } else {
243 val = q->data[q->rptr];
244 if (++q->rptr == ESCC_SERIO_QUEUE_SIZE) {
245 q->rptr = 0;
247 q->count--;
249 trace_escc_get_queue(CHN_C(s), val);
250 if (q->count > 0) {
251 serial_receive_byte(s, 0);
253 return val;
256 static int escc_update_irq_chn(ESCCChannelState *s)
258 if ((((s->wregs[W_INTR] & INTR_TXINT) && (s->txint == 1)) ||
259 /* tx ints enabled, pending */
260 ((((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINT1ST) ||
261 ((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINTALL)) &&
262 s->rxint == 1) ||
263 /* rx ints enabled, pending */
264 ((s->wregs[W_EXTINT] & EXTINT_BRKINT) &&
265 (s->rregs[R_STATUS] & STATUS_BRK)))) {
266 /* break int e&p */
267 return 1;
269 return 0;
272 static void escc_update_irq(ESCCChannelState *s)
274 int irq;
276 irq = escc_update_irq_chn(s);
277 irq |= escc_update_irq_chn(s->otherchn);
279 trace_escc_update_irq(irq);
280 qemu_set_irq(s->irq, irq);
283 static void escc_reset_chn(ESCCChannelState *s)
285 s->reg = 0;
286 s->rx = s->tx = 0;
287 s->rxint = s->txint = 0;
288 s->rxint_under_svc = s->txint_under_svc = 0;
289 s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0;
290 clear_queue(s);
293 static void escc_soft_reset_chn(ESCCChannelState *s)
295 escc_reset_chn(s);
297 s->wregs[W_CMD] = 0;
298 s->wregs[W_INTR] &= INTR_PAR_SPEC | INTR_WTRQ_TXRX;
299 s->wregs[W_RXCTRL] &= ~RXCTRL_RXEN;
300 /* 1 stop bit */
301 s->wregs[W_TXCTRL1] |= TXCTRL1_1STOP;
302 s->wregs[W_TXCTRL2] &= TXCTRL2_TXCRC | TXCTRL2_8BITS;
303 s->wregs[W_MINTR] &= ~MINTR_SOFTIACK;
304 s->wregs[W_MISC1] &= MISC1_ENC_MASK;
305 /* PLL disabled */
306 s->wregs[W_MISC2] &= MISC2_BRG_EN | MISC2_BRG_SRC |
307 MISC2_PLLCMD1 | MISC2_PLLCMD2;
308 s->wregs[W_MISC2] |= MISC2_PLLCMD0;
309 /* Enable most interrupts */
310 s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT |
311 EXTINT_TXUNDRN | EXTINT_BRKINT;
313 s->rregs[R_STATUS] &= STATUS_DCD | STATUS_SYNC | STATUS_CTS | STATUS_BRK;
314 s->rregs[R_STATUS] |= STATUS_TXEMPTY | STATUS_TXUNDRN;
315 if (s->disabled) {
316 s->rregs[R_STATUS] |= STATUS_DCD | STATUS_SYNC | STATUS_CTS;
318 s->rregs[R_SPEC] &= SPEC_ALLSENT;
319 s->rregs[R_SPEC] |= SPEC_BITS8;
320 s->rregs[R_INTR] = 0;
321 s->rregs[R_MISC] &= MISC_2CLKMISS;
324 static void escc_hard_reset_chn(ESCCChannelState *s)
326 escc_soft_reset_chn(s);
329 * Hard reset is almost identical to soft reset above, except that the
330 * values of WR9 (W_MINTR), WR10 (W_MISC1), WR11 (W_CLOCK) and WR14
331 * (W_MISC2) have extra bits forced to 0/1
333 s->wregs[W_MINTR] &= MINTR_VIS | MINTR_NV;
334 s->wregs[W_MINTR] |= MINTR_RST_B | MINTR_RST_A;
335 s->wregs[W_MISC1] = 0;
336 s->wregs[W_CLOCK] = CLOCK_TRXC;
337 s->wregs[W_MISC2] &= MISC2_PLLCMD1 | MISC2_PLLCMD2;
338 s->wregs[W_MISC2] |= MISC2_LCL_LOOP | MISC2_PLLCMD0;
341 static void escc_reset(DeviceState *d)
343 ESCCState *s = ESCC(d);
344 int i, j;
346 for (i = 0; i < 2; i++) {
347 ESCCChannelState *cs = &s->chn[i];
350 * According to the ESCC datasheet "Miscellaneous Questions" section
351 * on page 384, the values of the ESCC registers are not guaranteed on
352 * power-on until an explicit hardware or software reset has been
353 * issued. For now we zero the registers so that a device reset always
354 * returns the emulated device to a fixed state.
356 for (j = 0; j < ESCC_SERIAL_REGS; j++) {
357 cs->rregs[j] = 0;
358 cs->wregs[j] = 0;
362 * ...but there is an exception. The "Transmit Interrupts and Transmit
363 * Buffer Empty Bit" section on page 50 of the ESCC datasheet says of
364 * the STATUS_TXEMPTY bit in R_STATUS: "After a hardware reset
365 * (including a hardware reset by software), or a channel reset, this
366 * bit is set to 1". The Sun PROM checks this bit early on startup and
367 * gets stuck in an infinite loop if it is not set.
369 cs->rregs[R_STATUS] |= STATUS_TXEMPTY;
371 escc_reset_chn(cs);
375 static inline void set_rxint(ESCCChannelState *s)
377 s->rxint = 1;
379 * XXX: missing daisy chaining: escc_chn_b rx should have a lower priority
380 * than chn_a rx/tx/special_condition service
382 s->rxint_under_svc = 1;
383 if (s->chn == escc_chn_a) {
384 s->rregs[R_INTR] |= INTR_RXINTA;
385 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
386 s->otherchn->rregs[R_IVEC] = IVEC_HIRXINTA;
387 } else {
388 s->otherchn->rregs[R_IVEC] = IVEC_LORXINTA;
390 } else {
391 s->otherchn->rregs[R_INTR] |= INTR_RXINTB;
392 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
393 s->rregs[R_IVEC] = IVEC_HIRXINTB;
394 } else {
395 s->rregs[R_IVEC] = IVEC_LORXINTB;
398 escc_update_irq(s);
401 static inline void set_txint(ESCCChannelState *s)
403 s->txint = 1;
404 if (!s->rxint_under_svc) {
405 s->txint_under_svc = 1;
406 if (s->chn == escc_chn_a) {
407 if (s->wregs[W_INTR] & INTR_TXINT) {
408 s->rregs[R_INTR] |= INTR_TXINTA;
410 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
411 s->otherchn->rregs[R_IVEC] = IVEC_HITXINTA;
412 } else {
413 s->otherchn->rregs[R_IVEC] = IVEC_LOTXINTA;
415 } else {
416 s->rregs[R_IVEC] = IVEC_TXINTB;
417 if (s->wregs[W_INTR] & INTR_TXINT) {
418 s->otherchn->rregs[R_INTR] |= INTR_TXINTB;
421 escc_update_irq(s);
425 static inline void clr_rxint(ESCCChannelState *s)
427 s->rxint = 0;
428 s->rxint_under_svc = 0;
429 if (s->chn == escc_chn_a) {
430 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
431 s->otherchn->rregs[R_IVEC] = IVEC_HINOINT;
432 } else {
433 s->otherchn->rregs[R_IVEC] = IVEC_LONOINT;
435 s->rregs[R_INTR] &= ~INTR_RXINTA;
436 } else {
437 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
438 s->rregs[R_IVEC] = IVEC_HINOINT;
439 } else {
440 s->rregs[R_IVEC] = IVEC_LONOINT;
442 s->otherchn->rregs[R_INTR] &= ~INTR_RXINTB;
444 if (s->txint) {
445 set_txint(s);
447 escc_update_irq(s);
450 static inline void clr_txint(ESCCChannelState *s)
452 s->txint = 0;
453 s->txint_under_svc = 0;
454 if (s->chn == escc_chn_a) {
455 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
456 s->otherchn->rregs[R_IVEC] = IVEC_HINOINT;
457 } else {
458 s->otherchn->rregs[R_IVEC] = IVEC_LONOINT;
460 s->rregs[R_INTR] &= ~INTR_TXINTA;
461 } else {
462 s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB;
463 if (s->wregs[W_MINTR] & MINTR_STATUSHI) {
464 s->rregs[R_IVEC] = IVEC_HINOINT;
465 } else {
466 s->rregs[R_IVEC] = IVEC_LONOINT;
468 s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB;
470 if (s->rxint) {
471 set_rxint(s);
473 escc_update_irq(s);
476 static void escc_update_parameters(ESCCChannelState *s)
478 int speed, parity, data_bits, stop_bits;
479 QEMUSerialSetParams ssp;
481 if (!qemu_chr_fe_backend_connected(&s->chr) || s->type != escc_serial) {
482 return;
485 if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) {
486 if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREV) {
487 parity = 'E';
488 } else {
489 parity = 'O';
491 } else {
492 parity = 'N';
494 if ((s->wregs[W_TXCTRL1] & TXCTRL1_STPMSK) == TXCTRL1_2STOP) {
495 stop_bits = 2;
496 } else {
497 stop_bits = 1;
499 switch (s->wregs[W_TXCTRL2] & TXCTRL2_BITMSK) {
500 case TXCTRL2_5BITS:
501 data_bits = 5;
502 break;
503 case TXCTRL2_7BITS:
504 data_bits = 7;
505 break;
506 case TXCTRL2_6BITS:
507 data_bits = 6;
508 break;
509 default:
510 case TXCTRL2_8BITS:
511 data_bits = 8;
512 break;
514 speed = s->clock / ((s->wregs[W_BRGLO] | (s->wregs[W_BRGHI] << 8)) + 2);
515 switch (s->wregs[W_TXCTRL1] & TXCTRL1_CLKMSK) {
516 case TXCTRL1_CLK1X:
517 break;
518 case TXCTRL1_CLK16X:
519 speed /= 16;
520 break;
521 case TXCTRL1_CLK32X:
522 speed /= 32;
523 break;
524 default:
525 case TXCTRL1_CLK64X:
526 speed /= 64;
527 break;
529 ssp.speed = speed;
530 ssp.parity = parity;
531 ssp.data_bits = data_bits;
532 ssp.stop_bits = stop_bits;
533 trace_escc_update_parameters(CHN_C(s), speed, parity, data_bits, stop_bits);
534 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
537 static void escc_mem_write(void *opaque, hwaddr addr,
538 uint64_t val, unsigned size)
540 ESCCState *serial = opaque;
541 ESCCChannelState *s;
542 uint32_t saddr;
543 int newreg, channel;
545 val &= 0xff;
546 saddr = (addr >> reg_shift(serial)) & 1;
547 channel = (addr >> chn_shift(serial)) & 1;
548 s = &serial->chn[channel];
549 switch (saddr) {
550 case SERIAL_CTRL:
551 trace_escc_mem_writeb_ctrl(CHN_C(s), s->reg, val & 0xff);
552 newreg = 0;
553 switch (s->reg) {
554 case W_CMD:
555 newreg = val & CMD_PTR_MASK;
556 val &= CMD_CMD_MASK;
557 switch (val) {
558 case CMD_HI:
559 newreg |= CMD_HI;
560 break;
561 case CMD_CLR_TXINT:
562 clr_txint(s);
563 break;
564 case CMD_CLR_IUS:
565 if (s->rxint_under_svc) {
566 s->rxint_under_svc = 0;
567 if (s->txint) {
568 set_txint(s);
570 } else if (s->txint_under_svc) {
571 s->txint_under_svc = 0;
573 escc_update_irq(s);
574 break;
575 default:
576 break;
578 break;
579 case W_RXCTRL:
580 s->wregs[s->reg] = val;
581 if (val & RXCTRL_HUNT) {
582 s->rregs[R_STATUS] |= STATUS_SYNC;
584 break;
585 case W_INTR ... W_IVEC:
586 case W_SYNC1 ... W_TXBUF:
587 case W_MISC1 ... W_CLOCK:
588 case W_MISC2 ... W_EXTINT:
589 s->wregs[s->reg] = val;
590 break;
591 case W_TXCTRL1:
592 s->wregs[s->reg] = val;
594 * The ESCC datasheet states that SPEC_ALLSENT is always set in
595 * sync mode, and set in async mode when all characters have
596 * cleared the transmitter. Since writes to SERIAL_DATA use the
597 * blocking qemu_chr_fe_write_all() function to write each
598 * character, the guest can never see the state when async data
599 * is in the process of being transmitted so we can set this bit
600 * unconditionally regardless of the state of the W_TXCTRL1 mode
601 * bits.
603 s->rregs[R_SPEC] |= SPEC_ALLSENT;
604 escc_update_parameters(s);
605 break;
606 case W_TXCTRL2:
607 s->wregs[s->reg] = val;
608 escc_update_parameters(s);
609 break;
610 case W_BRGLO:
611 case W_BRGHI:
612 s->wregs[s->reg] = val;
613 s->rregs[s->reg] = val;
614 escc_update_parameters(s);
615 break;
616 case W_MINTR:
617 switch (val & MINTR_RST_MASK) {
618 case 0:
619 default:
620 break;
621 case MINTR_RST_B:
622 trace_escc_soft_reset_chn(CHN_C(&serial->chn[0]));
623 escc_soft_reset_chn(&serial->chn[0]);
624 return;
625 case MINTR_RST_A:
626 trace_escc_soft_reset_chn(CHN_C(&serial->chn[1]));
627 escc_soft_reset_chn(&serial->chn[1]);
628 return;
629 case MINTR_RST_ALL:
630 trace_escc_hard_reset();
631 escc_hard_reset_chn(&serial->chn[0]);
632 escc_hard_reset_chn(&serial->chn[1]);
633 return;
635 break;
636 default:
637 break;
639 if (s->reg == 0) {
640 s->reg = newreg;
641 } else {
642 s->reg = 0;
644 break;
645 case SERIAL_DATA:
646 trace_escc_mem_writeb_data(CHN_C(s), val);
648 * Lower the irq when data is written to the Tx buffer and no other
649 * interrupts are currently pending. The irq will be raised again once
650 * the Tx buffer becomes empty below.
652 s->txint = 0;
653 escc_update_irq(s);
654 s->tx = val;
655 if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { /* tx enabled */
656 if (s->wregs[W_MISC2] & MISC2_LCL_LOOP) {
657 serial_receive_byte(s, s->tx);
658 } else if (qemu_chr_fe_backend_connected(&s->chr)) {
660 * XXX this blocks entire thread. Rewrite to use
661 * qemu_chr_fe_write and background I/O callbacks
663 qemu_chr_fe_write_all(&s->chr, &s->tx, 1);
664 } else if (s->type == escc_kbd && !s->disabled) {
665 handle_kbd_command(s, val);
668 s->rregs[R_STATUS] |= STATUS_TXEMPTY; /* Tx buffer empty */
669 s->rregs[R_SPEC] |= SPEC_ALLSENT; /* All sent */
670 set_txint(s);
671 break;
672 default:
673 break;
677 static uint64_t escc_mem_read(void *opaque, hwaddr addr,
678 unsigned size)
680 ESCCState *serial = opaque;
681 ESCCChannelState *s;
682 uint32_t saddr;
683 uint32_t ret;
684 int channel;
686 saddr = (addr >> reg_shift(serial)) & 1;
687 channel = (addr >> chn_shift(serial)) & 1;
688 s = &serial->chn[channel];
689 switch (saddr) {
690 case SERIAL_CTRL:
691 trace_escc_mem_readb_ctrl(CHN_C(s), s->reg, s->rregs[s->reg]);
692 ret = s->rregs[s->reg];
693 s->reg = 0;
694 return ret;
695 case SERIAL_DATA:
696 s->rregs[R_STATUS] &= ~STATUS_RXAV;
697 clr_rxint(s);
698 if (s->type == escc_kbd || s->type == escc_mouse) {
699 ret = get_queue(s);
700 } else {
701 ret = s->rx;
703 trace_escc_mem_readb_data(CHN_C(s), ret);
704 qemu_chr_fe_accept_input(&s->chr);
705 return ret;
706 default:
707 break;
709 return 0;
712 static const MemoryRegionOps escc_mem_ops = {
713 .read = escc_mem_read,
714 .write = escc_mem_write,
715 .endianness = DEVICE_NATIVE_ENDIAN,
716 .valid = {
717 .min_access_size = 1,
718 .max_access_size = 1,
722 static int serial_can_receive(void *opaque)
724 ESCCChannelState *s = opaque;
725 int ret;
727 if (((s->wregs[W_RXCTRL] & RXCTRL_RXEN) == 0) /* Rx not enabled */
728 || ((s->rregs[R_STATUS] & STATUS_RXAV) == STATUS_RXAV)) {
729 /* char already available */
730 ret = 0;
731 } else {
732 ret = 1;
734 return ret;
737 static void serial_receive_byte(ESCCChannelState *s, int ch)
739 trace_escc_serial_receive_byte(CHN_C(s), ch);
740 s->rregs[R_STATUS] |= STATUS_RXAV;
741 s->rx = ch;
742 set_rxint(s);
745 static void serial_receive_break(ESCCChannelState *s)
747 s->rregs[R_STATUS] |= STATUS_BRK;
748 escc_update_irq(s);
751 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
753 ESCCChannelState *s = opaque;
754 serial_receive_byte(s, buf[0]);
757 static void serial_event(void *opaque, QEMUChrEvent event)
759 ESCCChannelState *s = opaque;
760 if (event == CHR_EVENT_BREAK) {
761 serial_receive_break(s);
765 static const VMStateDescription vmstate_escc_chn = {
766 .name = "escc_chn",
767 .version_id = 2,
768 .minimum_version_id = 1,
769 .fields = (const VMStateField[]) {
770 VMSTATE_UINT32(vmstate_dummy, ESCCChannelState),
771 VMSTATE_UINT32(reg, ESCCChannelState),
772 VMSTATE_UINT32(rxint, ESCCChannelState),
773 VMSTATE_UINT32(txint, ESCCChannelState),
774 VMSTATE_UINT32(rxint_under_svc, ESCCChannelState),
775 VMSTATE_UINT32(txint_under_svc, ESCCChannelState),
776 VMSTATE_UINT8(rx, ESCCChannelState),
777 VMSTATE_UINT8(tx, ESCCChannelState),
778 VMSTATE_BUFFER(wregs, ESCCChannelState),
779 VMSTATE_BUFFER(rregs, ESCCChannelState),
780 VMSTATE_END_OF_LIST()
784 static const VMStateDescription vmstate_escc = {
785 .name = "escc",
786 .version_id = 2,
787 .minimum_version_id = 1,
788 .fields = (const VMStateField[]) {
789 VMSTATE_STRUCT_ARRAY(chn, ESCCState, 2, 2, vmstate_escc_chn,
790 ESCCChannelState),
791 VMSTATE_END_OF_LIST()
795 static void sunkbd_handle_event(DeviceState *dev, QemuConsole *src,
796 InputEvent *evt)
798 ESCCChannelState *s = (ESCCChannelState *)dev;
799 int qcode, keycode;
800 InputKeyEvent *key;
802 assert(evt->type == INPUT_EVENT_KIND_KEY);
803 key = evt->u.key.data;
804 qcode = qemu_input_key_value_to_qcode(key->key);
805 trace_escc_sunkbd_event_in(qcode, QKeyCode_str(qcode),
806 key->down);
808 if (qcode == Q_KEY_CODE_CAPS_LOCK) {
809 if (key->down) {
810 s->caps_lock_mode ^= 1;
811 if (s->caps_lock_mode == 2) {
812 return; /* Drop second press */
814 } else {
815 s->caps_lock_mode ^= 2;
816 if (s->caps_lock_mode == 3) {
817 return; /* Drop first release */
822 if (qcode == Q_KEY_CODE_NUM_LOCK) {
823 if (key->down) {
824 s->num_lock_mode ^= 1;
825 if (s->num_lock_mode == 2) {
826 return; /* Drop second press */
828 } else {
829 s->num_lock_mode ^= 2;
830 if (s->num_lock_mode == 3) {
831 return; /* Drop first release */
836 if (qcode >= qemu_input_map_qcode_to_sun_len) {
837 return;
840 keycode = qemu_input_map_qcode_to_sun[qcode];
841 if (!key->down) {
842 keycode |= 0x80;
844 trace_escc_sunkbd_event_out(keycode);
845 put_queue(s, keycode);
848 static const QemuInputHandler sunkbd_handler = {
849 .name = "sun keyboard",
850 .mask = INPUT_EVENT_MASK_KEY,
851 .event = sunkbd_handle_event,
854 static uint8_t sunkbd_layout_dip_switch(const char *kbd_layout)
856 /* Return the value of the dip-switches in a SUN Type 5 keyboard */
857 static uint8_t ret = 0xff;
859 if ((ret == 0xff) && kbd_layout) {
860 int i;
861 struct layout_values {
862 const char *lang;
863 uint8_t dip;
864 } languages[] =
866 * Dip values from table 3-16 Layouts for Type 4, 5 and 5c Keyboards
869 {"en-us", 0x21}, /* U.S.A. (US5.kt) */
870 /* 0x22 is some other US (US_UNIX5.kt) */
871 {"fr", 0x23}, /* France (France5.kt) */
872 {"da", 0x24}, /* Denmark (Denmark5.kt) */
873 {"de", 0x25}, /* Germany (Germany5.kt) */
874 {"it", 0x26}, /* Italy (Italy5.kt) */
875 {"nl", 0x27}, /* The Netherlands (Netherland5.kt) */
876 {"no", 0x28}, /* Norway (Norway.kt) */
877 {"pt", 0x29}, /* Portugal (Portugal5.kt) */
878 {"es", 0x2a}, /* Spain (Spain5.kt) */
879 {"sv", 0x2b}, /* Sweden (Sweden5.kt) */
880 {"fr-ch", 0x2c}, /* Switzerland/French (Switzer_Fr5.kt) */
881 {"de-ch", 0x2d}, /* Switzerland/German (Switzer_Ge5.kt) */
882 {"en-gb", 0x2e}, /* Great Britain (UK5.kt) */
883 {"ko", 0x2f}, /* Korea (Korea5.kt) */
884 {"tw", 0x30}, /* Taiwan (Taiwan5.kt) */
885 {"ja", 0x31}, /* Japan (Japan5.kt) */
886 {"fr-ca", 0x32}, /* Canada/French (Canada_Fr5.kt) */
887 {"hu", 0x33}, /* Hungary (Hungary5.kt) */
888 {"pl", 0x34}, /* Poland (Poland5.kt) */
889 {"cz", 0x35}, /* Czech (Czech5.kt) */
890 {"ru", 0x36}, /* Russia (Russia5.kt) */
891 {"lv", 0x37}, /* Latvia (Latvia5.kt) */
892 {"tr", 0x38}, /* Turkey-Q5 (TurkeyQ5.kt) */
893 {"gr", 0x39}, /* Greece (Greece5.kt) */
894 {"ar", 0x3a}, /* Arabic (Arabic5.kt) */
895 {"lt", 0x3b}, /* Lithuania (Lithuania5.kt) */
896 {"nl-be", 0x3c}, /* Belgium (Belgian5.kt) */
897 {"be", 0x3c}, /* Belgium (Belgian5.kt) */
900 for (i = 0;
901 i < sizeof(languages) / sizeof(struct layout_values);
902 i++) {
903 if (!strcmp(kbd_layout, languages[i].lang)) {
904 ret = languages[i].dip;
905 return ret;
909 /* Found no known language code */
910 if ((kbd_layout[0] >= '0') && (kbd_layout[0] <= '9')) {
911 unsigned int tmp;
913 /* As a fallback we also accept numeric dip switch value */
914 if (!qemu_strtoui(kbd_layout, NULL, 0, &tmp)) {
915 ret = tmp;
920 if (ret == 0xff) {
921 /* Final fallback if keyboard_layout was not set or recognized */
922 ret = 0x21; /* en-us layout */
924 return ret;
927 static void handle_kbd_command(ESCCChannelState *s, int val)
929 trace_escc_kbd_command(val);
930 if (s->led_mode) { /* Ignore led byte */
931 s->led_mode = 0;
932 return;
934 switch (val) {
935 case 1: /* Reset, return type code */
936 clear_queue(s);
937 put_queue(s, 0xff);
938 put_queue(s, 4); /* Type 4 */
939 put_queue(s, 0x7f);
940 break;
941 case 0xe: /* Set leds */
942 s->led_mode = 1;
943 break;
944 case 7: /* Query layout */
945 case 0xf:
946 clear_queue(s);
947 put_queue(s, 0xfe);
948 put_queue(s, sunkbd_layout_dip_switch(s->sunkbd_layout));
949 break;
950 default:
951 break;
955 static void sunmouse_event(void *opaque,
956 int dx, int dy, int dz, int buttons_state)
958 ESCCChannelState *s = opaque;
959 int ch;
961 trace_escc_sunmouse_event(dx, dy, buttons_state);
962 ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */
964 if (buttons_state & MOUSE_EVENT_LBUTTON) {
965 ch ^= 0x4;
967 if (buttons_state & MOUSE_EVENT_MBUTTON) {
968 ch ^= 0x2;
970 if (buttons_state & MOUSE_EVENT_RBUTTON) {
971 ch ^= 0x1;
974 put_queue(s, ch);
976 ch = dx;
978 if (ch > 127) {
979 ch = 127;
980 } else if (ch < -127) {
981 ch = -127;
984 put_queue(s, ch & 0xff);
986 ch = -dy;
988 if (ch > 127) {
989 ch = 127;
990 } else if (ch < -127) {
991 ch = -127;
994 put_queue(s, ch & 0xff);
996 /* MSC protocol specifies two extra motion bytes */
998 put_queue(s, 0);
999 put_queue(s, 0);
1002 static void escc_init1(Object *obj)
1004 ESCCState *s = ESCC(obj);
1005 SysBusDevice *dev = SYS_BUS_DEVICE(obj);
1006 unsigned int i;
1008 for (i = 0; i < 2; i++) {
1009 sysbus_init_irq(dev, &s->chn[i].irq);
1010 s->chn[i].chn = 1 - i;
1012 s->chn[0].otherchn = &s->chn[1];
1013 s->chn[1].otherchn = &s->chn[0];
1015 sysbus_init_mmio(dev, &s->mmio);
1018 static void escc_realize(DeviceState *dev, Error **errp)
1020 ESCCState *s = ESCC(dev);
1021 unsigned int i;
1023 s->chn[0].disabled = s->disabled;
1024 s->chn[1].disabled = s->disabled;
1026 memory_region_init_io(&s->mmio, OBJECT(dev), &escc_mem_ops, s, "escc",
1027 ESCC_SIZE << s->it_shift);
1029 for (i = 0; i < 2; i++) {
1030 if (qemu_chr_fe_backend_connected(&s->chn[i].chr)) {
1031 s->chn[i].clock = s->frequency / 2;
1032 qemu_chr_fe_set_handlers(&s->chn[i].chr, serial_can_receive,
1033 serial_receive1, serial_event, NULL,
1034 &s->chn[i], NULL, true);
1038 if (s->chn[0].type == escc_mouse) {
1039 qemu_add_mouse_event_handler(sunmouse_event, &s->chn[0], 0,
1040 "QEMU Sun Mouse");
1042 if (s->chn[1].type == escc_kbd) {
1043 s->chn[1].hs = qemu_input_handler_register((DeviceState *)(&s->chn[1]),
1044 &sunkbd_handler);
1048 static Property escc_properties[] = {
1049 DEFINE_PROP_UINT32("frequency", ESCCState, frequency, 0),
1050 DEFINE_PROP_UINT32("it_shift", ESCCState, it_shift, 0),
1051 DEFINE_PROP_BOOL("bit_swap", ESCCState, bit_swap, false),
1052 DEFINE_PROP_UINT32("disabled", ESCCState, disabled, 0),
1053 DEFINE_PROP_UINT32("chnBtype", ESCCState, chn[0].type, 0),
1054 DEFINE_PROP_UINT32("chnAtype", ESCCState, chn[1].type, 0),
1055 DEFINE_PROP_CHR("chrB", ESCCState, chn[0].chr),
1056 DEFINE_PROP_CHR("chrA", ESCCState, chn[1].chr),
1057 DEFINE_PROP_STRING("chnA-sunkbd-layout", ESCCState, chn[1].sunkbd_layout),
1058 DEFINE_PROP_END_OF_LIST(),
1061 static void escc_class_init(ObjectClass *klass, void *data)
1063 DeviceClass *dc = DEVICE_CLASS(klass);
1065 dc->reset = escc_reset;
1066 dc->realize = escc_realize;
1067 dc->vmsd = &vmstate_escc;
1068 device_class_set_props(dc, escc_properties);
1069 set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
1072 static const TypeInfo escc_info = {
1073 .name = TYPE_ESCC,
1074 .parent = TYPE_SYS_BUS_DEVICE,
1075 .instance_size = sizeof(ESCCState),
1076 .instance_init = escc_init1,
1077 .class_init = escc_class_init,
1080 static void escc_register_types(void)
1082 type_register_static(&escc_info);
1085 type_init(escc_register_types)