2 * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
4 * PAPR Inter-VM Logical Lan, aka ibmveth
6 * Copyright (c) 2010,2011 David Gibson, IBM Corporation.
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
27 #include "qemu/osdep.h"
28 #include "qemu-common.h"
34 #include "hw/ppc/spapr.h"
35 #include "hw/ppc/spapr_vio.h"
36 #include "sysemu/sysemu.h"
41 #define MAX_PACKET_SIZE 65536
46 #define DPRINTF(fmt...) do { fprintf(stderr, fmt); } while (0)
48 #define DPRINTF(fmt...)
51 /* Compatibility flags for migration */
52 #define SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT 0
53 #define SPAPRVLAN_FLAG_RX_BUF_POOLS (1 << SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT)
59 typedef uint64_t vlan_bd_t
;
61 #define VLAN_BD_VALID 0x8000000000000000ULL
62 #define VLAN_BD_TOGGLE 0x4000000000000000ULL
63 #define VLAN_BD_NO_CSUM 0x0200000000000000ULL
64 #define VLAN_BD_CSUM_GOOD 0x0100000000000000ULL
65 #define VLAN_BD_LEN_MASK 0x00ffffff00000000ULL
66 #define VLAN_BD_LEN(bd) (((bd) & VLAN_BD_LEN_MASK) >> 32)
67 #define VLAN_BD_ADDR_MASK 0x00000000ffffffffULL
68 #define VLAN_BD_ADDR(bd) ((bd) & VLAN_BD_ADDR_MASK)
70 #define VLAN_VALID_BD(addr, len) (VLAN_BD_VALID | \
71 (((len) << 32) & VLAN_BD_LEN_MASK) | \
72 (addr & VLAN_BD_ADDR_MASK))
74 #define VLAN_RXQC_TOGGLE 0x80
75 #define VLAN_RXQC_VALID 0x40
76 #define VLAN_RXQC_NO_CSUM 0x02
77 #define VLAN_RXQC_CSUM_GOOD 0x01
79 #define VLAN_RQ_ALIGNMENT 16
80 #define VLAN_RXQ_BD_OFF 0
81 #define VLAN_FILTER_BD_OFF 8
82 #define VLAN_RX_BDS_OFF 16
84 * The final 8 bytes of the buffer list is a counter of frames dropped
85 * because there was not a buffer in the buffer list capable of holding
86 * the frame. We must avoid it, or the operating system will report garbage
89 #define VLAN_RX_BDS_LEN (SPAPR_TCE_PAGE_SIZE - VLAN_RX_BDS_OFF - 8)
90 #define VLAN_MAX_BUFS (VLAN_RX_BDS_LEN / 8)
92 #define TYPE_VIO_SPAPR_VLAN_DEVICE "spapr-vlan"
93 #define VIO_SPAPR_VLAN_DEVICE(obj) \
94 OBJECT_CHECK(VIOsPAPRVLANDevice, (obj), TYPE_VIO_SPAPR_VLAN_DEVICE)
96 #define RX_POOL_MAX_BDS 4096
97 #define RX_MAX_POOLS 5
102 vlan_bd_t bds
[RX_POOL_MAX_BDS
];
105 typedef struct VIOsPAPRVLANDevice
{
111 uint32_t add_buf_ptr
, use_buf_ptr
, rx_bufs
;
113 QEMUTimer
*rxp_timer
;
114 uint32_t compat_flags
; /* Compatability flags for migration */
115 RxBufPool
*rx_pool
[RX_MAX_POOLS
]; /* Receive buffer descriptor pools */
116 } VIOsPAPRVLANDevice
;
118 static int spapr_vlan_can_receive(NetClientState
*nc
)
120 VIOsPAPRVLANDevice
*dev
= qemu_get_nic_opaque(nc
);
122 return (dev
->isopen
&& dev
->rx_bufs
> 0);
126 * The last 8 bytes of the receive buffer list page (that has been
127 * supplied by the guest with the H_REGISTER_LOGICAL_LAN call) contain
128 * a counter for frames that have been dropped because there was no
129 * suitable receive buffer available. This function is used to increase
130 * this counter by one.
132 static void spapr_vlan_record_dropped_rx_frame(VIOsPAPRVLANDevice
*dev
)
136 cnt
= vio_ldq(&dev
->sdev
, dev
->buf_list
+ 4096 - 8);
137 vio_stq(&dev
->sdev
, dev
->buf_list
+ 4096 - 8, cnt
+ 1);
141 * Get buffer descriptor from one of our receive buffer pools
143 static vlan_bd_t
spapr_vlan_get_rx_bd_from_pool(VIOsPAPRVLANDevice
*dev
,
149 for (pool
= 0; pool
< RX_MAX_POOLS
; pool
++) {
150 if (dev
->rx_pool
[pool
]->count
> 0 &&
151 dev
->rx_pool
[pool
]->bufsize
>= size
+ 8) {
155 if (pool
== RX_MAX_POOLS
) {
156 /* Failed to find a suitable buffer */
160 DPRINTF("Found buffer: pool=%d count=%d rxbufs=%d\n", pool
,
161 dev
->rx_pool
[pool
]->count
, dev
->rx_bufs
);
163 /* Remove the buffer from the pool */
164 dev
->rx_pool
[pool
]->count
--;
165 bd
= dev
->rx_pool
[pool
]->bds
[dev
->rx_pool
[pool
]->count
];
166 dev
->rx_pool
[pool
]->bds
[dev
->rx_pool
[pool
]->count
] = 0;
172 * Get buffer descriptor from the receive buffer list page that has been
173 * supplied by the guest with the H_REGISTER_LOGICAL_LAN call
175 static vlan_bd_t
spapr_vlan_get_rx_bd_from_page(VIOsPAPRVLANDevice
*dev
,
178 int buf_ptr
= dev
->use_buf_ptr
;
183 if (buf_ptr
>= VLAN_RX_BDS_LEN
+ VLAN_RX_BDS_OFF
) {
184 buf_ptr
= VLAN_RX_BDS_OFF
;
187 bd
= vio_ldq(&dev
->sdev
, dev
->buf_list
+ buf_ptr
);
188 DPRINTF("use_buf_ptr=%d bd=0x%016llx\n",
189 buf_ptr
, (unsigned long long)bd
);
190 } while ((!(bd
& VLAN_BD_VALID
) || VLAN_BD_LEN(bd
) < size
+ 8)
191 && buf_ptr
!= dev
->use_buf_ptr
);
193 if (!(bd
& VLAN_BD_VALID
) || VLAN_BD_LEN(bd
) < size
+ 8) {
194 /* Failed to find a suitable buffer */
198 /* Remove the buffer from the pool */
199 dev
->use_buf_ptr
= buf_ptr
;
200 vio_stq(&dev
->sdev
, dev
->buf_list
+ dev
->use_buf_ptr
, 0);
202 DPRINTF("Found buffer: ptr=%d rxbufs=%d\n", dev
->use_buf_ptr
, dev
->rx_bufs
);
207 static ssize_t
spapr_vlan_receive(NetClientState
*nc
, const uint8_t *buf
,
210 VIOsPAPRVLANDevice
*dev
= qemu_get_nic_opaque(nc
);
211 VIOsPAPRDevice
*sdev
= VIO_SPAPR_DEVICE(dev
);
212 vlan_bd_t rxq_bd
= vio_ldq(sdev
, dev
->buf_list
+ VLAN_RXQ_BD_OFF
);
217 DPRINTF("spapr_vlan_receive() [%s] rx_bufs=%d\n", sdev
->qdev
.id
,
225 spapr_vlan_record_dropped_rx_frame(dev
);
229 if (dev
->compat_flags
& SPAPRVLAN_FLAG_RX_BUF_POOLS
) {
230 bd
= spapr_vlan_get_rx_bd_from_pool(dev
, size
);
232 bd
= spapr_vlan_get_rx_bd_from_page(dev
, size
);
235 spapr_vlan_record_dropped_rx_frame(dev
);
241 /* Transfer the packet data */
242 if (spapr_vio_dma_write(sdev
, VLAN_BD_ADDR(bd
) + 8, buf
, size
) < 0) {
246 DPRINTF("spapr_vlan_receive: DMA write completed\n");
248 /* Update the receive queue */
249 control
= VLAN_RXQC_TOGGLE
| VLAN_RXQC_VALID
;
250 if (rxq_bd
& VLAN_BD_TOGGLE
) {
251 control
^= VLAN_RXQC_TOGGLE
;
254 handle
= vio_ldq(sdev
, VLAN_BD_ADDR(bd
));
255 vio_stq(sdev
, VLAN_BD_ADDR(rxq_bd
) + dev
->rxq_ptr
+ 8, handle
);
256 vio_stl(sdev
, VLAN_BD_ADDR(rxq_bd
) + dev
->rxq_ptr
+ 4, size
);
257 vio_sth(sdev
, VLAN_BD_ADDR(rxq_bd
) + dev
->rxq_ptr
+ 2, 8);
258 vio_stb(sdev
, VLAN_BD_ADDR(rxq_bd
) + dev
->rxq_ptr
, control
);
260 DPRINTF("wrote rxq entry (ptr=0x%llx): 0x%016llx 0x%016llx\n",
261 (unsigned long long)dev
->rxq_ptr
,
262 (unsigned long long)vio_ldq(sdev
, VLAN_BD_ADDR(rxq_bd
) +
264 (unsigned long long)vio_ldq(sdev
, VLAN_BD_ADDR(rxq_bd
) +
268 if (dev
->rxq_ptr
>= VLAN_BD_LEN(rxq_bd
)) {
270 vio_stq(sdev
, dev
->buf_list
+ VLAN_RXQ_BD_OFF
, rxq_bd
^ VLAN_BD_TOGGLE
);
273 if (sdev
->signal_state
& 1) {
274 qemu_irq_pulse(spapr_vio_qirq(sdev
));
280 static NetClientInfo net_spapr_vlan_info
= {
281 .type
= NET_CLIENT_DRIVER_NIC
,
282 .size
= sizeof(NICState
),
283 .can_receive
= spapr_vlan_can_receive
,
284 .receive
= spapr_vlan_receive
,
287 static void spapr_vlan_flush_rx_queue(void *opaque
)
289 VIOsPAPRVLANDevice
*dev
= opaque
;
291 qemu_flush_queued_packets(qemu_get_queue(dev
->nic
));
294 static void spapr_vlan_reset_rx_pool(RxBufPool
*rxp
)
297 * Use INT_MAX as bufsize so that unused buffers are moved to the end
298 * of the list during the qsort in spapr_vlan_add_rxbuf_to_pool() later.
300 rxp
->bufsize
= INT_MAX
;
302 memset(rxp
->bds
, 0, sizeof(rxp
->bds
));
305 static void spapr_vlan_reset(VIOsPAPRDevice
*sdev
)
307 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(sdev
);
314 if (dev
->compat_flags
& SPAPRVLAN_FLAG_RX_BUF_POOLS
) {
315 for (i
= 0; i
< RX_MAX_POOLS
; i
++) {
316 spapr_vlan_reset_rx_pool(dev
->rx_pool
[i
]);
321 static void spapr_vlan_realize(VIOsPAPRDevice
*sdev
, Error
**errp
)
323 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(sdev
);
325 qemu_macaddr_default_if_unset(&dev
->nicconf
.macaddr
);
327 dev
->nic
= qemu_new_nic(&net_spapr_vlan_info
, &dev
->nicconf
,
328 object_get_typename(OBJECT(sdev
)), sdev
->qdev
.id
, dev
);
329 qemu_format_nic_info_str(qemu_get_queue(dev
->nic
), dev
->nicconf
.macaddr
.a
);
331 dev
->rxp_timer
= timer_new_us(QEMU_CLOCK_VIRTUAL
, spapr_vlan_flush_rx_queue
,
335 static void spapr_vlan_instance_init(Object
*obj
)
337 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(obj
);
340 device_add_bootindex_property(obj
, &dev
->nicconf
.bootindex
,
344 if (dev
->compat_flags
& SPAPRVLAN_FLAG_RX_BUF_POOLS
) {
345 for (i
= 0; i
< RX_MAX_POOLS
; i
++) {
346 dev
->rx_pool
[i
] = g_new(RxBufPool
, 1);
347 spapr_vlan_reset_rx_pool(dev
->rx_pool
[i
]);
352 static void spapr_vlan_instance_finalize(Object
*obj
)
354 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(obj
);
357 if (dev
->compat_flags
& SPAPRVLAN_FLAG_RX_BUF_POOLS
) {
358 for (i
= 0; i
< RX_MAX_POOLS
; i
++) {
359 g_free(dev
->rx_pool
[i
]);
360 dev
->rx_pool
[i
] = NULL
;
364 if (dev
->rxp_timer
) {
365 timer_del(dev
->rxp_timer
);
366 timer_free(dev
->rxp_timer
);
370 void spapr_vlan_create(VIOsPAPRBus
*bus
, NICInfo
*nd
)
374 dev
= qdev_create(&bus
->bus
, "spapr-vlan");
376 qdev_set_nic_properties(dev
, nd
);
378 qdev_init_nofail(dev
);
381 static int spapr_vlan_devnode(VIOsPAPRDevice
*dev
, void *fdt
, int node_off
)
383 VIOsPAPRVLANDevice
*vdev
= VIO_SPAPR_VLAN_DEVICE(dev
);
384 uint8_t padded_mac
[8] = {0, 0};
387 /* Some old phyp versions give the mac address in an 8-byte
388 * property. The kernel driver has an insane workaround for this;
389 * rather than doing the obvious thing and checking the property
390 * length, it checks whether the first byte has 0b10 in the low
391 * bits. If a correct 6-byte property has a different first byte
392 * the kernel will get the wrong mac address, overrunning its
393 * buffer in the process (read only, thank goodness).
395 * Here we workaround the kernel workaround by always supplying an
396 * 8-byte property, with the mac address in the last six bytes */
397 memcpy(&padded_mac
[2], &vdev
->nicconf
.macaddr
, ETH_ALEN
);
398 ret
= fdt_setprop(fdt
, node_off
, "local-mac-address",
399 padded_mac
, sizeof(padded_mac
));
404 ret
= fdt_setprop_cell(fdt
, node_off
, "ibm,mac-address-filters", 0);
412 static int check_bd(VIOsPAPRVLANDevice
*dev
, vlan_bd_t bd
,
413 target_ulong alignment
)
415 if ((VLAN_BD_ADDR(bd
) % alignment
)
416 || (VLAN_BD_LEN(bd
) % alignment
)) {
420 if (!spapr_vio_dma_valid(&dev
->sdev
, VLAN_BD_ADDR(bd
),
421 VLAN_BD_LEN(bd
), DMA_DIRECTION_FROM_DEVICE
)
422 || !spapr_vio_dma_valid(&dev
->sdev
, VLAN_BD_ADDR(bd
),
423 VLAN_BD_LEN(bd
), DMA_DIRECTION_TO_DEVICE
)) {
430 static target_ulong
h_register_logical_lan(PowerPCCPU
*cpu
,
431 sPAPRMachineState
*spapr
,
435 target_ulong reg
= args
[0];
436 target_ulong buf_list
= args
[1];
437 target_ulong rec_queue
= args
[2];
438 target_ulong filter_list
= args
[3];
439 VIOsPAPRDevice
*sdev
= spapr_vio_find_by_reg(spapr
->vio_bus
, reg
);
440 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(sdev
);
441 vlan_bd_t filter_list_bd
;
448 hcall_dprintf("H_REGISTER_LOGICAL_LAN called twice without "
449 "H_FREE_LOGICAL_LAN\n");
453 if (check_bd(dev
, VLAN_VALID_BD(buf_list
, SPAPR_TCE_PAGE_SIZE
),
454 SPAPR_TCE_PAGE_SIZE
) < 0) {
455 hcall_dprintf("Bad buf_list 0x" TARGET_FMT_lx
"\n", buf_list
);
459 filter_list_bd
= VLAN_VALID_BD(filter_list
, SPAPR_TCE_PAGE_SIZE
);
460 if (check_bd(dev
, filter_list_bd
, SPAPR_TCE_PAGE_SIZE
) < 0) {
461 hcall_dprintf("Bad filter_list 0x" TARGET_FMT_lx
"\n", filter_list
);
465 if (!(rec_queue
& VLAN_BD_VALID
)
466 || (check_bd(dev
, rec_queue
, VLAN_RQ_ALIGNMENT
) < 0)) {
467 hcall_dprintf("Bad receive queue\n");
471 dev
->buf_list
= buf_list
;
472 sdev
->signal_state
= 0;
474 rec_queue
&= ~VLAN_BD_TOGGLE
;
476 /* Initialize the buffer list */
477 vio_stq(sdev
, buf_list
, rec_queue
);
478 vio_stq(sdev
, buf_list
+ 8, filter_list_bd
);
479 spapr_vio_dma_set(sdev
, buf_list
+ VLAN_RX_BDS_OFF
, 0,
480 SPAPR_TCE_PAGE_SIZE
- VLAN_RX_BDS_OFF
);
481 dev
->add_buf_ptr
= VLAN_RX_BDS_OFF
- 8;
482 dev
->use_buf_ptr
= VLAN_RX_BDS_OFF
- 8;
486 /* Initialize the receive queue */
487 spapr_vio_dma_set(sdev
, VLAN_BD_ADDR(rec_queue
), 0, VLAN_BD_LEN(rec_queue
));
490 qemu_flush_queued_packets(qemu_get_queue(dev
->nic
));
496 static target_ulong
h_free_logical_lan(PowerPCCPU
*cpu
,
497 sPAPRMachineState
*spapr
,
498 target_ulong opcode
, target_ulong
*args
)
500 target_ulong reg
= args
[0];
501 VIOsPAPRDevice
*sdev
= spapr_vio_find_by_reg(spapr
->vio_bus
, reg
);
502 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(sdev
);
509 hcall_dprintf("H_FREE_LOGICAL_LAN called without "
510 "H_REGISTER_LOGICAL_LAN\n");
514 spapr_vlan_reset(sdev
);
519 * Used for qsort, this function compares two RxBufPools by size.
521 static int rx_pool_size_compare(const void *p1
, const void *p2
)
523 const RxBufPool
*pool1
= *(RxBufPool
**)p1
;
524 const RxBufPool
*pool2
= *(RxBufPool
**)p2
;
526 if (pool1
->bufsize
< pool2
->bufsize
) {
529 return pool1
->bufsize
> pool2
->bufsize
;
533 * Search for a matching buffer pool with exact matching size,
534 * or return -1 if no matching pool has been found.
536 static int spapr_vlan_get_rx_pool_id(VIOsPAPRVLANDevice
*dev
, int size
)
540 for (pool
= 0; pool
< RX_MAX_POOLS
; pool
++) {
541 if (dev
->rx_pool
[pool
]->bufsize
== size
) {
550 * Enqueuing receive buffer by adding it to one of our receive buffer pools
552 static target_long
spapr_vlan_add_rxbuf_to_pool(VIOsPAPRVLANDevice
*dev
,
555 int size
= VLAN_BD_LEN(buf
);
558 pool
= spapr_vlan_get_rx_pool_id(dev
, size
);
561 * No matching pool found? Try to use a new one. If the guest used all
562 * pools before, but changed the size of one pool inbetween, we might
563 * need to recycle that pool here (if it's empty already). Thus scan
564 * all buffer pools now, starting with the last (likely empty) one.
566 for (pool
= RX_MAX_POOLS
- 1; pool
>= 0 ; pool
--) {
567 if (dev
->rx_pool
[pool
]->count
== 0) {
568 dev
->rx_pool
[pool
]->bufsize
= size
;
570 * Sort pools by size so that spapr_vlan_receive()
571 * can later find the smallest buffer pool easily.
573 qsort(dev
->rx_pool
, RX_MAX_POOLS
, sizeof(dev
->rx_pool
[0]),
574 rx_pool_size_compare
);
575 pool
= spapr_vlan_get_rx_pool_id(dev
, size
);
576 DPRINTF("created RX pool %d for size %lld\n", pool
,
582 /* Still no usable pool? Give up */
583 if (pool
< 0 || dev
->rx_pool
[pool
]->count
>= RX_POOL_MAX_BDS
) {
587 DPRINTF("h_add_llan_buf(): Add buf using pool %i (size %lli, count=%i)\n",
588 pool
, VLAN_BD_LEN(buf
), dev
->rx_pool
[pool
]->count
);
590 dev
->rx_pool
[pool
]->bds
[dev
->rx_pool
[pool
]->count
++] = buf
;
596 * This is the old way of enqueuing receive buffers: Add it to the rx queue
597 * page that has been supplied by the guest (which is quite limited in size).
599 static target_long
spapr_vlan_add_rxbuf_to_page(VIOsPAPRVLANDevice
*dev
,
604 if (dev
->rx_bufs
>= VLAN_MAX_BUFS
) {
609 dev
->add_buf_ptr
+= 8;
610 if (dev
->add_buf_ptr
>= VLAN_RX_BDS_LEN
+ VLAN_RX_BDS_OFF
) {
611 dev
->add_buf_ptr
= VLAN_RX_BDS_OFF
;
614 bd
= vio_ldq(&dev
->sdev
, dev
->buf_list
+ dev
->add_buf_ptr
);
615 } while (bd
& VLAN_BD_VALID
);
617 vio_stq(&dev
->sdev
, dev
->buf_list
+ dev
->add_buf_ptr
, buf
);
619 DPRINTF("h_add_llan_buf(): Added buf ptr=%d rx_bufs=%d bd=0x%016llx\n",
620 dev
->add_buf_ptr
, dev
->rx_bufs
, (unsigned long long)buf
);
625 static target_ulong
h_add_logical_lan_buffer(PowerPCCPU
*cpu
,
626 sPAPRMachineState
*spapr
,
630 target_ulong reg
= args
[0];
631 target_ulong buf
= args
[1];
632 VIOsPAPRDevice
*sdev
= spapr_vio_find_by_reg(spapr
->vio_bus
, reg
);
633 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(sdev
);
636 DPRINTF("H_ADD_LOGICAL_LAN_BUFFER(0x" TARGET_FMT_lx
637 ", 0x" TARGET_FMT_lx
")\n", reg
, buf
);
640 hcall_dprintf("Bad device\n");
644 if ((check_bd(dev
, buf
, 4) < 0)
645 || (VLAN_BD_LEN(buf
) < 16)) {
646 hcall_dprintf("Bad buffer enqueued\n");
654 if (dev
->compat_flags
& SPAPRVLAN_FLAG_RX_BUF_POOLS
) {
655 ret
= spapr_vlan_add_rxbuf_to_pool(dev
, buf
);
657 ret
= spapr_vlan_add_rxbuf_to_page(dev
, buf
);
666 * Give guest some more time to add additional RX buffers before we
667 * flush the receive queue, so that e.g. fragmented IP packets can
668 * be passed to the guest in one go later (instead of passing single
669 * fragments if there is only one receive buffer available).
671 timer_mod(dev
->rxp_timer
, qemu_clock_get_us(QEMU_CLOCK_VIRTUAL
) + 500);
676 static target_ulong
h_send_logical_lan(PowerPCCPU
*cpu
,
677 sPAPRMachineState
*spapr
,
678 target_ulong opcode
, target_ulong
*args
)
680 target_ulong reg
= args
[0];
681 target_ulong
*bufs
= args
+ 1;
682 target_ulong continue_token
= args
[7];
683 VIOsPAPRDevice
*sdev
= spapr_vio_find_by_reg(spapr
->vio_bus
, reg
);
684 VIOsPAPRVLANDevice
*dev
= VIO_SPAPR_VLAN_DEVICE(sdev
);
690 DPRINTF("H_SEND_LOGICAL_LAN(0x" TARGET_FMT_lx
", <bufs>, 0x"
691 TARGET_FMT_lx
")\n", reg
, continue_token
);
697 DPRINTF("rxbufs = %d\n", dev
->rx_bufs
);
703 if (continue_token
) {
704 return H_HARDWARE
; /* FIXME actually handle this */
708 for (i
= 0; i
< 6; i
++) {
709 DPRINTF(" buf desc: 0x" TARGET_FMT_lx
"\n", bufs
[i
]);
710 if (!(bufs
[i
] & VLAN_BD_VALID
)) {
713 total_len
+= VLAN_BD_LEN(bufs
[i
]);
717 DPRINTF("h_send_logical_lan() %d buffers, total length 0x%x\n",
720 if (total_len
== 0) {
724 if (total_len
> MAX_PACKET_SIZE
) {
725 /* Don't let the guest force too large an allocation */
729 lbuf
= alloca(total_len
);
731 for (i
= 0; i
< nbufs
; i
++) {
732 ret
= spapr_vio_dma_read(sdev
, VLAN_BD_ADDR(bufs
[i
]),
733 p
, VLAN_BD_LEN(bufs
[i
]));
738 p
+= VLAN_BD_LEN(bufs
[i
]);
741 qemu_send_packet(qemu_get_queue(dev
->nic
), lbuf
, total_len
);
746 static target_ulong
h_multicast_ctrl(PowerPCCPU
*cpu
, sPAPRMachineState
*spapr
,
747 target_ulong opcode
, target_ulong
*args
)
749 target_ulong reg
= args
[0];
750 VIOsPAPRDevice
*dev
= spapr_vio_find_by_reg(spapr
->vio_bus
, reg
);
759 static Property spapr_vlan_properties
[] = {
760 DEFINE_SPAPR_PROPERTIES(VIOsPAPRVLANDevice
, sdev
),
761 DEFINE_NIC_PROPERTIES(VIOsPAPRVLANDevice
, nicconf
),
762 DEFINE_PROP_BIT("use-rx-buffer-pools", VIOsPAPRVLANDevice
,
763 compat_flags
, SPAPRVLAN_FLAG_RX_BUF_POOLS_BIT
, true),
764 DEFINE_PROP_END_OF_LIST(),
767 static bool spapr_vlan_rx_buffer_pools_needed(void *opaque
)
769 VIOsPAPRVLANDevice
*dev
= opaque
;
771 return (dev
->compat_flags
& SPAPRVLAN_FLAG_RX_BUF_POOLS
) != 0;
774 static const VMStateDescription vmstate_rx_buffer_pool
= {
775 .name
= "spapr_llan/rx_buffer_pool",
777 .minimum_version_id
= 1,
778 .needed
= spapr_vlan_rx_buffer_pools_needed
,
779 .fields
= (VMStateField
[]) {
780 VMSTATE_INT32(bufsize
, RxBufPool
),
781 VMSTATE_INT32(count
, RxBufPool
),
782 VMSTATE_UINT64_ARRAY(bds
, RxBufPool
, RX_POOL_MAX_BDS
),
783 VMSTATE_END_OF_LIST()
787 static const VMStateDescription vmstate_rx_pools
= {
788 .name
= "spapr_llan/rx_pools",
790 .minimum_version_id
= 1,
791 .needed
= spapr_vlan_rx_buffer_pools_needed
,
792 .fields
= (VMStateField
[]) {
793 VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(rx_pool
, VIOsPAPRVLANDevice
,
795 vmstate_rx_buffer_pool
, RxBufPool
),
796 VMSTATE_END_OF_LIST()
800 static const VMStateDescription vmstate_spapr_llan
= {
801 .name
= "spapr_llan",
803 .minimum_version_id
= 1,
804 .fields
= (VMStateField
[]) {
805 VMSTATE_SPAPR_VIO(sdev
, VIOsPAPRVLANDevice
),
807 VMSTATE_BOOL(isopen
, VIOsPAPRVLANDevice
),
808 VMSTATE_UINT64(buf_list
, VIOsPAPRVLANDevice
),
809 VMSTATE_UINT32(add_buf_ptr
, VIOsPAPRVLANDevice
),
810 VMSTATE_UINT32(use_buf_ptr
, VIOsPAPRVLANDevice
),
811 VMSTATE_UINT32(rx_bufs
, VIOsPAPRVLANDevice
),
812 VMSTATE_UINT64(rxq_ptr
, VIOsPAPRVLANDevice
),
814 VMSTATE_END_OF_LIST()
816 .subsections
= (const VMStateDescription
* []) {
822 static void spapr_vlan_class_init(ObjectClass
*klass
, void *data
)
824 DeviceClass
*dc
= DEVICE_CLASS(klass
);
825 VIOsPAPRDeviceClass
*k
= VIO_SPAPR_DEVICE_CLASS(klass
);
827 k
->realize
= spapr_vlan_realize
;
828 k
->reset
= spapr_vlan_reset
;
829 k
->devnode
= spapr_vlan_devnode
;
830 k
->dt_name
= "l-lan";
831 k
->dt_type
= "network";
832 k
->dt_compatible
= "IBM,l-lan";
833 k
->signal_mask
= 0x1;
834 set_bit(DEVICE_CATEGORY_NETWORK
, dc
->categories
);
835 dc
->props
= spapr_vlan_properties
;
836 k
->rtce_window_size
= 0x10000000;
837 dc
->vmsd
= &vmstate_spapr_llan
;
840 static const TypeInfo spapr_vlan_info
= {
841 .name
= TYPE_VIO_SPAPR_VLAN_DEVICE
,
842 .parent
= TYPE_VIO_SPAPR_DEVICE
,
843 .instance_size
= sizeof(VIOsPAPRVLANDevice
),
844 .class_init
= spapr_vlan_class_init
,
845 .instance_init
= spapr_vlan_instance_init
,
846 .instance_finalize
= spapr_vlan_instance_finalize
,
849 static void spapr_vlan_register_types(void)
851 spapr_register_hypercall(H_REGISTER_LOGICAL_LAN
, h_register_logical_lan
);
852 spapr_register_hypercall(H_FREE_LOGICAL_LAN
, h_free_logical_lan
);
853 spapr_register_hypercall(H_SEND_LOGICAL_LAN
, h_send_logical_lan
);
854 spapr_register_hypercall(H_ADD_LOGICAL_LAN_BUFFER
,
855 h_add_logical_lan_buffer
);
856 spapr_register_hypercall(H_MULTICAST_CTRL
, h_multicast_ctrl
);
857 type_register_static(&spapr_vlan_info
);
860 type_init(spapr_vlan_register_types
)