disas/disas.c

   1 /* General "disassemble this chunk" code.  Used for debugging. */
   2 #include "qemu/osdep.h"
   3 #include "disas/disas-internal.h"
   4 #include "elf.h"
   5 #include "qemu/qemu-print.h"
   6 #include "disas/disas.h"
   7 #include "disas/capstone.h"
   8 #include "hw/core/cpu.h"
   9 #include "exec/memory.h"
  10
  11 /* Filled in by elfload.c.  Simplistic, but will do for now. */
  12 struct syminfo *syminfos = NULL;
  13
  14 /*
  15  * Get LENGTH bytes from info's buffer, at host address memaddr.
  16  * Transfer them to myaddr.
  17  */
  18 static int host_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
  19                             struct disassemble_info *info)
  20 {
  21     if (memaddr < info->buffer_vma
  22         || memaddr + length > info->buffer_vma + info->buffer_length) {
  23         /* Out of bounds.  Use EIO because GDB uses it.  */
  24         return EIO;
  25     }
  26     memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
  27     return 0;
  28 }
  29
  30 /*
  31  * Get LENGTH bytes from info's buffer, at target address memaddr.
  32  * Transfer them to myaddr.
  33  */
  34 static int target_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
  35                               struct disassemble_info *info)
  36 {
  37     CPUDebug *s = container_of(info, CPUDebug, info);
  38     int r = cpu_memory_rw_debug(s->cpu, memaddr, myaddr, length, 0);
  39     return r ? EIO : 0;
  40 }
  41
  42 /*
  43  * Print an error message.  We can assume that this is in response to
  44  * an error return from {host,target}_read_memory.
  45  */
  46 static void perror_memory(int status, bfd_vma memaddr,
  47                           struct disassemble_info *info)
  48 {
  49     if (status != EIO) {
  50         /* Can't happen.  */
  51         info->fprintf_func(info->stream, "Unknown error %d\n", status);
  52     } else {
  53         /* Address between memaddr and memaddr + len was out of bounds.  */
  54         info->fprintf_func(info->stream,
  55                            "Address 0x%" PRIx64 " is out of bounds.\n",
  56                            memaddr);
  57     }
  58 }
  59
  60 /* Print address in hex. */
  61 static void print_address(bfd_vma addr, struct disassemble_info *info)
  62 {
  63     info->fprintf_func(info->stream, "0x%" PRIx64, addr);
  64 }
  65
  66 /* Print address in hex, truncated to the width of a host virtual address. */
  67 static void host_print_address(bfd_vma addr, struct disassemble_info *info)
  68 {
  69     print_address((uintptr_t)addr, info);
  70 }
  71
  72 /* Stub prevents some fruitless earching in optabs disassemblers. */
  73 static int symbol_at_address(bfd_vma addr, struct disassemble_info *info)
  74 {
  75     return 1;
  76 }
  77
  78 static int print_insn_objdump(bfd_vma pc, disassemble_info *info,
  79                               const char *prefix)
  80 {
  81     int i, n = info->buffer_length;
  82     g_autofree uint8_t *buf = g_malloc(n);
  83
  84     if (info->read_memory_func(pc, buf, n, info) == 0) {
  85         for (i = 0; i < n; ++i) {
  86             if (i % 32 == 0) {
  87                 info->fprintf_func(info->stream, "\n%s: ", prefix);
  88             }
  89             info->fprintf_func(info->stream, "%02x", buf[i]);
  90         }
  91     } else {
  92         info->fprintf_func(info->stream, "unable to read memory");
  93     }
  94     return n;
  95 }
  96
  97 static int print_insn_od_host(bfd_vma pc, disassemble_info *info)
  98 {
  99     return print_insn_objdump(pc, info, "OBJD-H");
 100 }
 101
 102 static int print_insn_od_target(bfd_vma pc, disassemble_info *info)
 103 {
 104     return print_insn_objdump(pc, info, "OBJD-T");
 105 }
 106
 107 static void initialize_debug(CPUDebug *s)
 108 {
 109     memset(s, 0, sizeof(*s));
 110     s->info.arch = bfd_arch_unknown;
 111     s->info.cap_arch = -1;
 112     s->info.cap_insn_unit = 4;
 113     s->info.cap_insn_split = 4;
 114     s->info.memory_error_func = perror_memory;
 115     s->info.symbol_at_address_func = symbol_at_address;
 116 }
 117
 118 void disas_initialize_debug_target(CPUDebug *s, CPUState *cpu)
 119 {
 120     initialize_debug(s);
 121
 122     s->cpu = cpu;
 123     s->info.read_memory_func = target_read_memory;
 124     s->info.print_address_func = print_address;
 125     if (target_words_bigendian()) {
 126         s->info.endian = BFD_ENDIAN_BIG;
 127     } else {
 128         s->info.endian =  BFD_ENDIAN_LITTLE;
 129     }
 130
 131     CPUClass *cc = CPU_GET_CLASS(cpu);
 132     if (cc->disas_set_info) {
 133         cc->disas_set_info(cpu, &s->info);
 134     }
 135 }
 136
 137 static void initialize_debug_host(CPUDebug *s)
 138 {
 139     initialize_debug(s);
 140
 141     s->info.read_memory_func = host_read_memory;
 142     s->info.print_address_func = host_print_address;
 143 #if HOST_BIG_ENDIAN
 144     s->info.endian = BFD_ENDIAN_BIG;
 145 #else
 146     s->info.endian = BFD_ENDIAN_LITTLE;
 147 #endif
 148 #if defined(CONFIG_TCG_INTERPRETER)
 149     s->info.print_insn = print_insn_tci;
 150 #elif defined(__i386__)
 151     s->info.mach = bfd_mach_i386_i386;
 152     s->info.cap_arch = CS_ARCH_X86;
 153     s->info.cap_mode = CS_MODE_32;
 154     s->info.cap_insn_unit = 1;
 155     s->info.cap_insn_split = 8;
 156 #elif defined(__x86_64__)
 157     s->info.mach = bfd_mach_x86_64;
 158     s->info.cap_arch = CS_ARCH_X86;
 159     s->info.cap_mode = CS_MODE_64;
 160     s->info.cap_insn_unit = 1;
 161     s->info.cap_insn_split = 8;
 162 #elif defined(_ARCH_PPC)
 163     s->info.cap_arch = CS_ARCH_PPC;
 164 # ifdef _ARCH_PPC64
 165     s->info.cap_mode = CS_MODE_64;
 166 # endif
 167 #elif defined(__riscv)
 168 #if defined(_ILP32) || (__riscv_xlen == 32)
 169     s->info.print_insn = print_insn_riscv32;
 170 #elif defined(_LP64)
 171     s->info.print_insn = print_insn_riscv64;
 172 #else
 173 #error unsupported RISC-V ABI
 174 #endif
 175 #elif defined(__aarch64__)
 176     s->info.cap_arch = CS_ARCH_ARM64;
 177 #elif defined(__alpha__)
 178     s->info.print_insn = print_insn_alpha;
 179 #elif defined(__sparc__)
 180     s->info.print_insn = print_insn_sparc;
 181     s->info.mach = bfd_mach_sparc_v9b;
 182 #elif defined(__arm__)
 183     /* TCG only generates code for arm mode.  */
 184     s->info.cap_arch = CS_ARCH_ARM;
 185 #elif defined(__MIPSEB__)
 186     s->info.print_insn = print_insn_big_mips;
 187 #elif defined(__MIPSEL__)
 188     s->info.print_insn = print_insn_little_mips;
 189 #elif defined(__m68k__)
 190     s->info.print_insn = print_insn_m68k;
 191 #elif defined(__s390__)
 192     s->info.cap_arch = CS_ARCH_SYSZ;
 193     s->info.cap_insn_unit = 2;
 194     s->info.cap_insn_split = 6;
 195 #elif defined(__hppa__)
 196     s->info.print_insn = print_insn_hppa;
 197 #elif defined(__loongarch__)
 198     s->info.print_insn = print_insn_loongarch;
 199 #endif
 200 }
 201
 202 /* Disassemble this for me please... (debugging).  */
 203 void target_disas(FILE *out, CPUState *cpu, uint64_t code, size_t size)
 204 {
 205     uint64_t pc;
 206     int count;
 207     CPUDebug s;
 208
 209     disas_initialize_debug_target(&s, cpu);
 210     s.info.fprintf_func = fprintf;
 211     s.info.stream = out;
 212     s.info.buffer_vma = code;
 213     s.info.buffer_length = size;
 214
 215     if (s.info.cap_arch >= 0 && cap_disas_target(&s.info, code, size)) {
 216         return;
 217     }
 218
 219     if (s.info.print_insn == NULL) {
 220         s.info.print_insn = print_insn_od_target;
 221     }
 222
 223     for (pc = code; size > 0; pc += count, size -= count) {
 224         fprintf(out, "0x%08" PRIx64 ":  ", pc);
 225         count = s.info.print_insn(pc, &s.info);
 226         fprintf(out, "\n");
 227         if (count < 0) {
 228             break;
 229         }
 230         if (size < count) {
 231             fprintf(out,
 232                     "Disassembler disagrees with translator over instruction "
 233                     "decoding\n"
 234                     "Please report this to qemu-devel@nongnu.org\n");
 235             break;
 236         }
 237     }
 238 }
 239
 240 int disas_gstring_printf(FILE *stream, const char *fmt, ...)
 241 {
 242     /* We abuse the FILE parameter to pass a GString. */
 243     GString *s = (GString *)stream;
 244     int initial_len = s->len;
 245     va_list va;
 246
 247     va_start(va, fmt);
 248     g_string_append_vprintf(s, fmt, va);
 249     va_end(va);
 250
 251     return s->len - initial_len;
 252 }
 253
 254 static void plugin_print_address(bfd_vma addr, struct disassemble_info *info)
 255 {
 256     /* does nothing */
 257 }
 258
 259
 260 /*
 261  * We should only be dissembling one instruction at a time here. If
 262  * there is left over it usually indicates the front end has read more
 263  * bytes than it needed.
 264  */
 265 char *plugin_disas(CPUState *cpu, uint64_t addr, size_t size)
 266 {
 267     CPUDebug s;
 268     GString *ds = g_string_new(NULL);
 269
 270     disas_initialize_debug_target(&s, cpu);
 271     s.info.fprintf_func = disas_gstring_printf;
 272     s.info.stream = (FILE *)ds;  /* abuse this slot */
 273     s.info.buffer_vma = addr;
 274     s.info.buffer_length = size;
 275     s.info.print_address_func = plugin_print_address;
 276
 277     if (s.info.cap_arch >= 0 && cap_disas_plugin(&s.info, addr, size)) {
 278         ; /* done */
 279     } else if (s.info.print_insn) {
 280         s.info.print_insn(addr, &s.info);
 281     } else {
 282         ; /* cannot disassemble -- return empty string */
 283     }
 284
 285     /* Return the buffer, freeing the GString container.  */
 286     return g_string_free(ds, false);
 287 }
 288
 289 /* Disassemble this for me please... (debugging). */
 290 void disas(FILE *out, const void *code, size_t size)
 291 {
 292     uintptr_t pc;
 293     int count;
 294     CPUDebug s;
 295
 296     initialize_debug_host(&s);
 297     s.info.fprintf_func = fprintf;
 298     s.info.stream = out;
 299     s.info.buffer = code;
 300     s.info.buffer_vma = (uintptr_t)code;
 301     s.info.buffer_length = size;
 302
 303     if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size)) {
 304         return;
 305     }
 306
 307     if (s.info.print_insn == NULL) {
 308         s.info.print_insn = print_insn_od_host;
 309     }
 310     for (pc = (uintptr_t)code; size > 0; pc += count, size -= count) {
 311         fprintf(out, "0x%08" PRIxPTR ":  ", pc);
 312         count = s.info.print_insn(pc, &s.info);
 313         fprintf(out, "\n");
 314         if (count < 0) {
 315             break;
 316         }
 317     }
 318
 319 }
 320
 321 /* Look up symbol for debugging purpose.  Returns "" if unknown. */
 322 const char *lookup_symbol(uint64_t orig_addr)
 323 {
 324     const char *symbol = "";
 325     struct syminfo *s;
 326
 327     for (s = syminfos; s; s = s->next) {
 328         symbol = s->lookup_symbol(s, orig_addr);
 329         if (symbol[0] != '\0') {
 330             break;
 331         }
 332     }
 333
 334     return symbol;
 335 }