target-arm: Fix reset and migration of TTBCR(S)
[qemu/kevin.git] / hw / net / smc91c111.c
blob21c1b8f54b8b4be3586af74ee75687e3bc424f4e
1 /*
2 * SMSC 91C111 Ethernet interface emulation
4 * Copyright (c) 2005 CodeSourcery, LLC.
5 * Written by Paul Brook
7 * This code is licensed under the GPL
8 */
10 #include "qemu/osdep.h"
11 #include "hw/sysbus.h"
12 #include "net/net.h"
13 #include "hw/devices.h"
14 /* For crc32 */
15 #include <zlib.h>
17 /* Number of 2k memory pages available. */
18 #define NUM_PACKETS 4
20 #define TYPE_SMC91C111 "smc91c111"
21 #define SMC91C111(obj) OBJECT_CHECK(smc91c111_state, (obj), TYPE_SMC91C111)
23 typedef struct {
24 SysBusDevice parent_obj;
26 NICState *nic;
27 NICConf conf;
28 uint16_t tcr;
29 uint16_t rcr;
30 uint16_t cr;
31 uint16_t ctr;
32 uint16_t gpr;
33 uint16_t ptr;
34 uint16_t ercv;
35 qemu_irq irq;
36 int bank;
37 int packet_num;
38 int tx_alloc;
39 /* Bitmask of allocated packets. */
40 int allocated;
41 int tx_fifo_len;
42 int tx_fifo[NUM_PACKETS];
43 int rx_fifo_len;
44 int rx_fifo[NUM_PACKETS];
45 int tx_fifo_done_len;
46 int tx_fifo_done[NUM_PACKETS];
47 /* Packet buffer memory. */
48 uint8_t data[NUM_PACKETS][2048];
49 uint8_t int_level;
50 uint8_t int_mask;
51 MemoryRegion mmio;
52 } smc91c111_state;
54 static const VMStateDescription vmstate_smc91c111 = {
55 .name = "smc91c111",
56 .version_id = 1,
57 .minimum_version_id = 1,
58 .fields = (VMStateField[]) {
59 VMSTATE_UINT16(tcr, smc91c111_state),
60 VMSTATE_UINT16(rcr, smc91c111_state),
61 VMSTATE_UINT16(cr, smc91c111_state),
62 VMSTATE_UINT16(ctr, smc91c111_state),
63 VMSTATE_UINT16(gpr, smc91c111_state),
64 VMSTATE_UINT16(ptr, smc91c111_state),
65 VMSTATE_UINT16(ercv, smc91c111_state),
66 VMSTATE_INT32(bank, smc91c111_state),
67 VMSTATE_INT32(packet_num, smc91c111_state),
68 VMSTATE_INT32(tx_alloc, smc91c111_state),
69 VMSTATE_INT32(allocated, smc91c111_state),
70 VMSTATE_INT32(tx_fifo_len, smc91c111_state),
71 VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS),
72 VMSTATE_INT32(rx_fifo_len, smc91c111_state),
73 VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS),
74 VMSTATE_INT32(tx_fifo_done_len, smc91c111_state),
75 VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS),
76 VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048),
77 VMSTATE_UINT8(int_level, smc91c111_state),
78 VMSTATE_UINT8(int_mask, smc91c111_state),
79 VMSTATE_END_OF_LIST()
83 #define RCR_SOFT_RST 0x8000
84 #define RCR_STRIP_CRC 0x0200
85 #define RCR_RXEN 0x0100
87 #define TCR_EPH_LOOP 0x2000
88 #define TCR_NOCRC 0x0100
89 #define TCR_PAD_EN 0x0080
90 #define TCR_FORCOL 0x0004
91 #define TCR_LOOP 0x0002
92 #define TCR_TXEN 0x0001
94 #define INT_MD 0x80
95 #define INT_ERCV 0x40
96 #define INT_EPH 0x20
97 #define INT_RX_OVRN 0x10
98 #define INT_ALLOC 0x08
99 #define INT_TX_EMPTY 0x04
100 #define INT_TX 0x02
101 #define INT_RCV 0x01
103 #define CTR_AUTO_RELEASE 0x0800
104 #define CTR_RELOAD 0x0002
105 #define CTR_STORE 0x0001
107 #define RS_ALGNERR 0x8000
108 #define RS_BRODCAST 0x4000
109 #define RS_BADCRC 0x2000
110 #define RS_ODDFRAME 0x1000
111 #define RS_TOOLONG 0x0800
112 #define RS_TOOSHORT 0x0400
113 #define RS_MULTICAST 0x0001
115 /* Update interrupt status. */
116 static void smc91c111_update(smc91c111_state *s)
118 int level;
120 if (s->tx_fifo_len == 0)
121 s->int_level |= INT_TX_EMPTY;
122 if (s->tx_fifo_done_len != 0)
123 s->int_level |= INT_TX;
124 level = (s->int_level & s->int_mask) != 0;
125 qemu_set_irq(s->irq, level);
128 static int smc91c111_can_receive(smc91c111_state *s)
130 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) {
131 return 1;
133 if (s->allocated == (1 << NUM_PACKETS) - 1 ||
134 s->rx_fifo_len == NUM_PACKETS) {
135 return 0;
137 return 1;
140 static inline void smc91c111_flush_queued_packets(smc91c111_state *s)
142 if (smc91c111_can_receive(s)) {
143 qemu_flush_queued_packets(qemu_get_queue(s->nic));
147 /* Try to allocate a packet. Returns 0x80 on failure. */
148 static int smc91c111_allocate_packet(smc91c111_state *s)
150 int i;
151 if (s->allocated == (1 << NUM_PACKETS) - 1) {
152 return 0x80;
155 for (i = 0; i < NUM_PACKETS; i++) {
156 if ((s->allocated & (1 << i)) == 0)
157 break;
159 s->allocated |= 1 << i;
160 return i;
164 /* Process a pending TX allocate. */
165 static void smc91c111_tx_alloc(smc91c111_state *s)
167 s->tx_alloc = smc91c111_allocate_packet(s);
168 if (s->tx_alloc == 0x80)
169 return;
170 s->int_level |= INT_ALLOC;
171 smc91c111_update(s);
174 /* Remove and item from the RX FIFO. */
175 static void smc91c111_pop_rx_fifo(smc91c111_state *s)
177 int i;
179 s->rx_fifo_len--;
180 if (s->rx_fifo_len) {
181 for (i = 0; i < s->rx_fifo_len; i++)
182 s->rx_fifo[i] = s->rx_fifo[i + 1];
183 s->int_level |= INT_RCV;
184 } else {
185 s->int_level &= ~INT_RCV;
187 smc91c111_flush_queued_packets(s);
188 smc91c111_update(s);
191 /* Remove an item from the TX completion FIFO. */
192 static void smc91c111_pop_tx_fifo_done(smc91c111_state *s)
194 int i;
196 if (s->tx_fifo_done_len == 0)
197 return;
198 s->tx_fifo_done_len--;
199 for (i = 0; i < s->tx_fifo_done_len; i++)
200 s->tx_fifo_done[i] = s->tx_fifo_done[i + 1];
203 /* Release the memory allocated to a packet. */
204 static void smc91c111_release_packet(smc91c111_state *s, int packet)
206 s->allocated &= ~(1 << packet);
207 if (s->tx_alloc == 0x80)
208 smc91c111_tx_alloc(s);
209 smc91c111_flush_queued_packets(s);
212 /* Flush the TX FIFO. */
213 static void smc91c111_do_tx(smc91c111_state *s)
215 int i;
216 int len;
217 int control;
218 int packetnum;
219 uint8_t *p;
221 if ((s->tcr & TCR_TXEN) == 0)
222 return;
223 if (s->tx_fifo_len == 0)
224 return;
225 for (i = 0; i < s->tx_fifo_len; i++) {
226 packetnum = s->tx_fifo[i];
227 p = &s->data[packetnum][0];
228 /* Set status word. */
229 *(p++) = 0x01;
230 *(p++) = 0x40;
231 len = *(p++);
232 len |= ((int)*(p++)) << 8;
233 len -= 6;
234 control = p[len + 1];
235 if (control & 0x20)
236 len++;
237 /* ??? This overwrites the data following the buffer.
238 Don't know what real hardware does. */
239 if (len < 64 && (s->tcr & TCR_PAD_EN)) {
240 memset(p + len, 0, 64 - len);
241 len = 64;
243 #if 0
245 int add_crc;
247 /* The card is supposed to append the CRC to the frame.
248 However none of the other network traffic has the CRC
249 appended. Suspect this is low level ethernet detail we
250 don't need to worry about. */
251 add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0;
252 if (add_crc) {
253 uint32_t crc;
255 crc = crc32(~0, p, len);
256 memcpy(p + len, &crc, 4);
257 len += 4;
260 #endif
261 if (s->ctr & CTR_AUTO_RELEASE)
262 /* Race? */
263 smc91c111_release_packet(s, packetnum);
264 else if (s->tx_fifo_done_len < NUM_PACKETS)
265 s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum;
266 qemu_send_packet(qemu_get_queue(s->nic), p, len);
268 s->tx_fifo_len = 0;
269 smc91c111_update(s);
272 /* Add a packet to the TX FIFO. */
273 static void smc91c111_queue_tx(smc91c111_state *s, int packet)
275 if (s->tx_fifo_len == NUM_PACKETS)
276 return;
277 s->tx_fifo[s->tx_fifo_len++] = packet;
278 smc91c111_do_tx(s);
281 static void smc91c111_reset(DeviceState *dev)
283 smc91c111_state *s = SMC91C111(dev);
285 s->bank = 0;
286 s->tx_fifo_len = 0;
287 s->tx_fifo_done_len = 0;
288 s->rx_fifo_len = 0;
289 s->allocated = 0;
290 s->packet_num = 0;
291 s->tx_alloc = 0;
292 s->tcr = 0;
293 s->rcr = 0;
294 s->cr = 0xa0b1;
295 s->ctr = 0x1210;
296 s->ptr = 0;
297 s->ercv = 0x1f;
298 s->int_level = INT_TX_EMPTY;
299 s->int_mask = 0;
300 smc91c111_update(s);
303 #define SET_LOW(name, val) s->name = (s->name & 0xff00) | val
304 #define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8)
306 static void smc91c111_writeb(void *opaque, hwaddr offset,
307 uint32_t value)
309 smc91c111_state *s = (smc91c111_state *)opaque;
311 offset = offset & 0xf;
312 if (offset == 14) {
313 s->bank = value;
314 return;
316 if (offset == 15)
317 return;
318 switch (s->bank) {
319 case 0:
320 switch (offset) {
321 case 0: /* TCR */
322 SET_LOW(tcr, value);
323 return;
324 case 1:
325 SET_HIGH(tcr, value);
326 return;
327 case 4: /* RCR */
328 SET_LOW(rcr, value);
329 return;
330 case 5:
331 SET_HIGH(rcr, value);
332 if (s->rcr & RCR_SOFT_RST) {
333 smc91c111_reset(DEVICE(s));
335 smc91c111_flush_queued_packets(s);
336 return;
337 case 10: case 11: /* RPCR */
338 /* Ignored */
339 return;
340 case 12: case 13: /* Reserved */
341 return;
343 break;
345 case 1:
346 switch (offset) {
347 case 0: /* CONFIG */
348 SET_LOW(cr, value);
349 return;
350 case 1:
351 SET_HIGH(cr,value);
352 return;
353 case 2: case 3: /* BASE */
354 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
355 /* Not implemented. */
356 return;
357 case 10: /* Genral Purpose */
358 SET_LOW(gpr, value);
359 return;
360 case 11:
361 SET_HIGH(gpr, value);
362 return;
363 case 12: /* Control */
364 if (value & 1)
365 fprintf(stderr, "smc91c111:EEPROM store not implemented\n");
366 if (value & 2)
367 fprintf(stderr, "smc91c111:EEPROM reload not implemented\n");
368 value &= ~3;
369 SET_LOW(ctr, value);
370 return;
371 case 13:
372 SET_HIGH(ctr, value);
373 return;
375 break;
377 case 2:
378 switch (offset) {
379 case 0: /* MMU Command */
380 switch (value >> 5) {
381 case 0: /* no-op */
382 break;
383 case 1: /* Allocate for TX. */
384 s->tx_alloc = 0x80;
385 s->int_level &= ~INT_ALLOC;
386 smc91c111_update(s);
387 smc91c111_tx_alloc(s);
388 break;
389 case 2: /* Reset MMU. */
390 s->allocated = 0;
391 s->tx_fifo_len = 0;
392 s->tx_fifo_done_len = 0;
393 s->rx_fifo_len = 0;
394 s->tx_alloc = 0;
395 break;
396 case 3: /* Remove from RX FIFO. */
397 smc91c111_pop_rx_fifo(s);
398 break;
399 case 4: /* Remove from RX FIFO and release. */
400 if (s->rx_fifo_len > 0) {
401 smc91c111_release_packet(s, s->rx_fifo[0]);
403 smc91c111_pop_rx_fifo(s);
404 break;
405 case 5: /* Release. */
406 smc91c111_release_packet(s, s->packet_num);
407 break;
408 case 6: /* Add to TX FIFO. */
409 smc91c111_queue_tx(s, s->packet_num);
410 break;
411 case 7: /* Reset TX FIFO. */
412 s->tx_fifo_len = 0;
413 s->tx_fifo_done_len = 0;
414 break;
416 return;
417 case 1:
418 /* Ignore. */
419 return;
420 case 2: /* Packet Number Register */
421 s->packet_num = value;
422 return;
423 case 3: case 4: case 5:
424 /* Should be readonly, but linux writes to them anyway. Ignore. */
425 return;
426 case 6: /* Pointer */
427 SET_LOW(ptr, value);
428 return;
429 case 7:
430 SET_HIGH(ptr, value);
431 return;
432 case 8: case 9: case 10: case 11: /* Data */
434 int p;
435 int n;
437 if (s->ptr & 0x8000)
438 n = s->rx_fifo[0];
439 else
440 n = s->packet_num;
441 p = s->ptr & 0x07ff;
442 if (s->ptr & 0x4000) {
443 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff);
444 } else {
445 p += (offset & 3);
447 s->data[n][p] = value;
449 return;
450 case 12: /* Interrupt ACK. */
451 s->int_level &= ~(value & 0xd6);
452 if (value & INT_TX)
453 smc91c111_pop_tx_fifo_done(s);
454 smc91c111_update(s);
455 return;
456 case 13: /* Interrupt mask. */
457 s->int_mask = value;
458 smc91c111_update(s);
459 return;
461 break;
463 case 3:
464 switch (offset) {
465 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
466 /* Multicast table. */
467 /* Not implemented. */
468 return;
469 case 8: case 9: /* Management Interface. */
470 /* Not implemented. */
471 return;
472 case 12: /* Early receive. */
473 s->ercv = value & 0x1f;
474 return;
475 case 13:
476 /* Ignore. */
477 return;
479 break;
481 hw_error("smc91c111_write: Bad reg %d:%x\n", s->bank, (int)offset);
484 static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
486 smc91c111_state *s = (smc91c111_state *)opaque;
488 offset = offset & 0xf;
489 if (offset == 14) {
490 return s->bank;
492 if (offset == 15)
493 return 0x33;
494 switch (s->bank) {
495 case 0:
496 switch (offset) {
497 case 0: /* TCR */
498 return s->tcr & 0xff;
499 case 1:
500 return s->tcr >> 8;
501 case 2: /* EPH Status */
502 return 0;
503 case 3:
504 return 0x40;
505 case 4: /* RCR */
506 return s->rcr & 0xff;
507 case 5:
508 return s->rcr >> 8;
509 case 6: /* Counter */
510 case 7:
511 /* Not implemented. */
512 return 0;
513 case 8: /* Memory size. */
514 return NUM_PACKETS;
515 case 9: /* Free memory available. */
517 int i;
518 int n;
519 n = 0;
520 for (i = 0; i < NUM_PACKETS; i++) {
521 if (s->allocated & (1 << i))
522 n++;
524 return n;
526 case 10: case 11: /* RPCR */
527 /* Not implemented. */
528 return 0;
529 case 12: case 13: /* Reserved */
530 return 0;
532 break;
534 case 1:
535 switch (offset) {
536 case 0: /* CONFIG */
537 return s->cr & 0xff;
538 case 1:
539 return s->cr >> 8;
540 case 2: case 3: /* BASE */
541 /* Not implemented. */
542 return 0;
543 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
544 return s->conf.macaddr.a[offset - 4];
545 case 10: /* General Purpose */
546 return s->gpr & 0xff;
547 case 11:
548 return s->gpr >> 8;
549 case 12: /* Control */
550 return s->ctr & 0xff;
551 case 13:
552 return s->ctr >> 8;
554 break;
556 case 2:
557 switch (offset) {
558 case 0: case 1: /* MMUCR Busy bit. */
559 return 0;
560 case 2: /* Packet Number. */
561 return s->packet_num;
562 case 3: /* Allocation Result. */
563 return s->tx_alloc;
564 case 4: /* TX FIFO */
565 if (s->tx_fifo_done_len == 0)
566 return 0x80;
567 else
568 return s->tx_fifo_done[0];
569 case 5: /* RX FIFO */
570 if (s->rx_fifo_len == 0)
571 return 0x80;
572 else
573 return s->rx_fifo[0];
574 case 6: /* Pointer */
575 return s->ptr & 0xff;
576 case 7:
577 return (s->ptr >> 8) & 0xf7;
578 case 8: case 9: case 10: case 11: /* Data */
580 int p;
581 int n;
583 if (s->ptr & 0x8000)
584 n = s->rx_fifo[0];
585 else
586 n = s->packet_num;
587 p = s->ptr & 0x07ff;
588 if (s->ptr & 0x4000) {
589 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff);
590 } else {
591 p += (offset & 3);
593 return s->data[n][p];
595 case 12: /* Interrupt status. */
596 return s->int_level;
597 case 13: /* Interrupt mask. */
598 return s->int_mask;
600 break;
602 case 3:
603 switch (offset) {
604 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
605 /* Multicast table. */
606 /* Not implemented. */
607 return 0;
608 case 8: /* Management Interface. */
609 /* Not implemented. */
610 return 0x30;
611 case 9:
612 return 0x33;
613 case 10: /* Revision. */
614 return 0x91;
615 case 11:
616 return 0x33;
617 case 12:
618 return s->ercv;
619 case 13:
620 return 0;
622 break;
624 hw_error("smc91c111_read: Bad reg %d:%x\n", s->bank, (int)offset);
625 return 0;
628 static void smc91c111_writew(void *opaque, hwaddr offset,
629 uint32_t value)
631 smc91c111_writeb(opaque, offset, value & 0xff);
632 smc91c111_writeb(opaque, offset + 1, value >> 8);
635 static void smc91c111_writel(void *opaque, hwaddr offset,
636 uint32_t value)
638 /* 32-bit writes to offset 0xc only actually write to the bank select
639 register (offset 0xe) */
640 if (offset != 0xc)
641 smc91c111_writew(opaque, offset, value & 0xffff);
642 smc91c111_writew(opaque, offset + 2, value >> 16);
645 static uint32_t smc91c111_readw(void *opaque, hwaddr offset)
647 uint32_t val;
648 val = smc91c111_readb(opaque, offset);
649 val |= smc91c111_readb(opaque, offset + 1) << 8;
650 return val;
653 static uint32_t smc91c111_readl(void *opaque, hwaddr offset)
655 uint32_t val;
656 val = smc91c111_readw(opaque, offset);
657 val |= smc91c111_readw(opaque, offset + 2) << 16;
658 return val;
661 static int smc91c111_can_receive_nc(NetClientState *nc)
663 smc91c111_state *s = qemu_get_nic_opaque(nc);
665 return smc91c111_can_receive(s);
668 static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size)
670 smc91c111_state *s = qemu_get_nic_opaque(nc);
671 int status;
672 int packetsize;
673 uint32_t crc;
674 int packetnum;
675 uint8_t *p;
677 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
678 return -1;
679 /* Short packets are padded with zeros. Receiving a packet
680 < 64 bytes long is considered an error condition. */
681 if (size < 64)
682 packetsize = 64;
683 else
684 packetsize = (size & ~1);
685 packetsize += 6;
686 crc = (s->rcr & RCR_STRIP_CRC) == 0;
687 if (crc)
688 packetsize += 4;
689 /* TODO: Flag overrun and receive errors. */
690 if (packetsize > 2048)
691 return -1;
692 packetnum = smc91c111_allocate_packet(s);
693 if (packetnum == 0x80)
694 return -1;
695 s->rx_fifo[s->rx_fifo_len++] = packetnum;
697 p = &s->data[packetnum][0];
698 /* ??? Multicast packets? */
699 status = 0;
700 if (size > 1518)
701 status |= RS_TOOLONG;
702 if (size & 1)
703 status |= RS_ODDFRAME;
704 *(p++) = status & 0xff;
705 *(p++) = status >> 8;
706 *(p++) = packetsize & 0xff;
707 *(p++) = packetsize >> 8;
708 memcpy(p, buf, size & ~1);
709 p += (size & ~1);
710 /* Pad short packets. */
711 if (size < 64) {
712 int pad;
714 if (size & 1)
715 *(p++) = buf[size - 1];
716 pad = 64 - size;
717 memset(p, 0, pad);
718 p += pad;
719 size = 64;
721 /* It's not clear if the CRC should go before or after the last byte in
722 odd sized packets. Linux disables the CRC, so that's no help.
723 The pictures in the documentation show the CRC aligned on a 16-bit
724 boundary before the last odd byte, so that's what we do. */
725 if (crc) {
726 crc = crc32(~0, buf, size);
727 *(p++) = crc & 0xff; crc >>= 8;
728 *(p++) = crc & 0xff; crc >>= 8;
729 *(p++) = crc & 0xff; crc >>= 8;
730 *(p++) = crc & 0xff;
732 if (size & 1) {
733 *(p++) = buf[size - 1];
734 *p = 0x60;
735 } else {
736 *(p++) = 0;
737 *p = 0x40;
739 /* TODO: Raise early RX interrupt? */
740 s->int_level |= INT_RCV;
741 smc91c111_update(s);
743 return size;
746 static const MemoryRegionOps smc91c111_mem_ops = {
747 /* The special case for 32 bit writes to 0xc means we can't just
748 * set .impl.min/max_access_size to 1, unfortunately
750 .old_mmio = {
751 .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, },
752 .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, },
754 .endianness = DEVICE_NATIVE_ENDIAN,
757 static NetClientInfo net_smc91c111_info = {
758 .type = NET_CLIENT_OPTIONS_KIND_NIC,
759 .size = sizeof(NICState),
760 .can_receive = smc91c111_can_receive_nc,
761 .receive = smc91c111_receive,
764 static int smc91c111_init1(SysBusDevice *sbd)
766 DeviceState *dev = DEVICE(sbd);
767 smc91c111_state *s = SMC91C111(dev);
769 memory_region_init_io(&s->mmio, OBJECT(s), &smc91c111_mem_ops, s,
770 "smc91c111-mmio", 16);
771 sysbus_init_mmio(sbd, &s->mmio);
772 sysbus_init_irq(sbd, &s->irq);
773 qemu_macaddr_default_if_unset(&s->conf.macaddr);
774 s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf,
775 object_get_typename(OBJECT(dev)), dev->id, s);
776 qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
777 /* ??? Save/restore. */
778 return 0;
781 static Property smc91c111_properties[] = {
782 DEFINE_NIC_PROPERTIES(smc91c111_state, conf),
783 DEFINE_PROP_END_OF_LIST(),
786 static void smc91c111_class_init(ObjectClass *klass, void *data)
788 DeviceClass *dc = DEVICE_CLASS(klass);
789 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
791 k->init = smc91c111_init1;
792 dc->reset = smc91c111_reset;
793 dc->vmsd = &vmstate_smc91c111;
794 dc->props = smc91c111_properties;
797 static const TypeInfo smc91c111_info = {
798 .name = TYPE_SMC91C111,
799 .parent = TYPE_SYS_BUS_DEVICE,
800 .instance_size = sizeof(smc91c111_state),
801 .class_init = smc91c111_class_init,
804 static void smc91c111_register_types(void)
806 type_register_static(&smc91c111_info);
809 /* Legacy helper function. Should go away when machine config files are
810 implemented. */
811 void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
813 DeviceState *dev;
814 SysBusDevice *s;
816 qemu_check_nic_model(nd, "smc91c111");
817 dev = qdev_create(NULL, TYPE_SMC91C111);
818 qdev_set_nic_properties(dev, nd);
819 qdev_init_nofail(dev);
820 s = SYS_BUS_DEVICE(dev);
821 sysbus_mmio_map(s, 0, base);
822 sysbus_connect_irq(s, 0, irq);
825 type_init(smc91c111_register_types)