2 * Postcopy migration for RAM
4 * Copyright 2013-2015 Red Hat, Inc. and/or its affiliates
7 * Dave Gilbert <dgilbert@redhat.com>
9 * This work is licensed under the terms of the GNU GPL, version 2 or later.
10 * See the COPYING file in the top-level directory.
15 * Postcopy is a migration technique where the execution flips from the
16 * source to the destination before all the data has been copied.
19 #include "qemu/osdep.h"
20 #include "exec/target_page.h"
21 #include "migration.h"
22 #include "qemu-file.h"
24 #include "postcopy-ram.h"
26 #include "qapi/error.h"
27 #include "qemu/notify.h"
29 #include "sysemu/sysemu.h"
30 #include "qemu/error-report.h"
32 #include "hw/boards.h"
34 /* Arbitrary limit on size of each discard command,
35 * keeps them around ~200 bytes
37 #define MAX_DISCARDS_PER_COMMAND 12
39 struct PostcopyDiscardState
{
40 const char *ramblock_name
;
43 * Start and length of a discard range (bytes)
45 uint64_t start_list
[MAX_DISCARDS_PER_COMMAND
];
46 uint64_t length_list
[MAX_DISCARDS_PER_COMMAND
];
47 unsigned int nsentwords
;
48 unsigned int nsentcmds
;
51 static NotifierWithReturnList postcopy_notifier_list
;
53 void postcopy_infrastructure_init(void)
55 notifier_with_return_list_init(&postcopy_notifier_list
);
58 void postcopy_add_notifier(NotifierWithReturn
*nn
)
60 notifier_with_return_list_add(&postcopy_notifier_list
, nn
);
63 void postcopy_remove_notifier(NotifierWithReturn
*n
)
65 notifier_with_return_remove(n
);
68 int postcopy_notify(enum PostcopyNotifyReason reason
, Error
**errp
)
70 struct PostcopyNotifyData pnd
;
74 return notifier_with_return_list_notify(&postcopy_notifier_list
,
78 /* Postcopy needs to detect accesses to pages that haven't yet been copied
79 * across, and efficiently map new pages in, the techniques for doing this
80 * are target OS specific.
82 #if defined(__linux__)
85 #include <sys/ioctl.h>
86 #include <sys/syscall.h>
87 #include <asm/types.h> /* for __u64 */
90 #if defined(__linux__) && defined(__NR_userfaultfd) && defined(CONFIG_EVENTFD)
91 #include <sys/eventfd.h>
92 #include <linux/userfaultfd.h>
94 typedef struct PostcopyBlocktimeContext
{
95 /* time when page fault initiated per vCPU */
96 uint32_t *page_fault_vcpu_time
;
97 /* page address per vCPU */
99 uint32_t total_blocktime
;
100 /* blocktime per vCPU */
101 uint32_t *vcpu_blocktime
;
102 /* point in time when last page fault was initiated */
104 /* number of vCPU are suspended */
109 * Handler for exit event, necessary for
110 * releasing whole blocktime_ctx
112 Notifier exit_notifier
;
113 } PostcopyBlocktimeContext
;
115 static void destroy_blocktime_context(struct PostcopyBlocktimeContext
*ctx
)
117 g_free(ctx
->page_fault_vcpu_time
);
118 g_free(ctx
->vcpu_addr
);
119 g_free(ctx
->vcpu_blocktime
);
123 static void migration_exit_cb(Notifier
*n
, void *data
)
125 PostcopyBlocktimeContext
*ctx
= container_of(n
, PostcopyBlocktimeContext
,
127 destroy_blocktime_context(ctx
);
130 static struct PostcopyBlocktimeContext
*blocktime_context_new(void)
132 MachineState
*ms
= MACHINE(qdev_get_machine());
133 unsigned int smp_cpus
= ms
->smp
.cpus
;
134 PostcopyBlocktimeContext
*ctx
= g_new0(PostcopyBlocktimeContext
, 1);
135 ctx
->page_fault_vcpu_time
= g_new0(uint32_t, smp_cpus
);
136 ctx
->vcpu_addr
= g_new0(uintptr_t, smp_cpus
);
137 ctx
->vcpu_blocktime
= g_new0(uint32_t, smp_cpus
);
139 ctx
->exit_notifier
.notify
= migration_exit_cb
;
140 ctx
->start_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
141 qemu_add_exit_notifier(&ctx
->exit_notifier
);
145 static uint32List
*get_vcpu_blocktime_list(PostcopyBlocktimeContext
*ctx
)
147 MachineState
*ms
= MACHINE(qdev_get_machine());
148 uint32List
*list
= NULL
;
151 for (i
= ms
->smp
.cpus
- 1; i
>= 0; i
--) {
152 QAPI_LIST_PREPEND(list
, ctx
->vcpu_blocktime
[i
]);
159 * This function just populates MigrationInfo from postcopy's
160 * blocktime context. It will not populate MigrationInfo,
161 * unless postcopy-blocktime capability was set.
163 * @info: pointer to MigrationInfo to populate
165 void fill_destination_postcopy_migration_info(MigrationInfo
*info
)
167 MigrationIncomingState
*mis
= migration_incoming_get_current();
168 PostcopyBlocktimeContext
*bc
= mis
->blocktime_ctx
;
174 info
->has_postcopy_blocktime
= true;
175 info
->postcopy_blocktime
= bc
->total_blocktime
;
176 info
->has_postcopy_vcpu_blocktime
= true;
177 info
->postcopy_vcpu_blocktime
= get_vcpu_blocktime_list(bc
);
180 static uint32_t get_postcopy_total_blocktime(void)
182 MigrationIncomingState
*mis
= migration_incoming_get_current();
183 PostcopyBlocktimeContext
*bc
= mis
->blocktime_ctx
;
189 return bc
->total_blocktime
;
193 * receive_ufd_features: check userfault fd features, to request only supported
194 * features in the future.
196 * Returns: true on success
198 * __NR_userfaultfd - should be checked before
199 * @features: out parameter will contain uffdio_api.features provided by kernel
202 static bool receive_ufd_features(uint64_t *features
)
204 struct uffdio_api api_struct
= {0};
208 /* if we are here __NR_userfaultfd should exists */
209 ufd
= syscall(__NR_userfaultfd
, O_CLOEXEC
);
211 error_report("%s: syscall __NR_userfaultfd failed: %s", __func__
,
217 api_struct
.api
= UFFD_API
;
218 api_struct
.features
= 0;
219 if (ioctl(ufd
, UFFDIO_API
, &api_struct
)) {
220 error_report("%s: UFFDIO_API failed: %s", __func__
,
226 *features
= api_struct
.features
;
234 * request_ufd_features: this function should be called only once on a newly
235 * opened ufd, subsequent calls will lead to error.
237 * Returns: true on success
239 * @ufd: fd obtained from userfaultfd syscall
240 * @features: bit mask see UFFD_API_FEATURES
242 static bool request_ufd_features(int ufd
, uint64_t features
)
244 struct uffdio_api api_struct
= {0};
247 api_struct
.api
= UFFD_API
;
248 api_struct
.features
= features
;
249 if (ioctl(ufd
, UFFDIO_API
, &api_struct
)) {
250 error_report("%s failed: UFFDIO_API failed: %s", __func__
,
255 ioctl_mask
= (__u64
)1 << _UFFDIO_REGISTER
|
256 (__u64
)1 << _UFFDIO_UNREGISTER
;
257 if ((api_struct
.ioctls
& ioctl_mask
) != ioctl_mask
) {
258 error_report("Missing userfault features: %" PRIx64
,
259 (uint64_t)(~api_struct
.ioctls
& ioctl_mask
));
266 static bool ufd_check_and_apply(int ufd
, MigrationIncomingState
*mis
)
268 uint64_t asked_features
= 0;
269 static uint64_t supported_features
;
272 * it's not possible to
273 * request UFFD_API twice per one fd
274 * userfault fd features is persistent
276 if (!supported_features
) {
277 if (!receive_ufd_features(&supported_features
)) {
278 error_report("%s failed", __func__
);
283 #ifdef UFFD_FEATURE_THREAD_ID
284 if (migrate_postcopy_blocktime() && mis
&&
285 UFFD_FEATURE_THREAD_ID
& supported_features
) {
286 /* kernel supports that feature */
287 /* don't create blocktime_context if it exists */
288 if (!mis
->blocktime_ctx
) {
289 mis
->blocktime_ctx
= blocktime_context_new();
292 asked_features
|= UFFD_FEATURE_THREAD_ID
;
297 * request features, even if asked_features is 0, due to
298 * kernel expects UFFD_API before UFFDIO_REGISTER, per
299 * userfault file descriptor
301 if (!request_ufd_features(ufd
, asked_features
)) {
302 error_report("%s failed: features %" PRIu64
, __func__
,
307 if (qemu_real_host_page_size
!= ram_pagesize_summary()) {
308 bool have_hp
= false;
309 /* We've got a huge page */
310 #ifdef UFFD_FEATURE_MISSING_HUGETLBFS
311 have_hp
= supported_features
& UFFD_FEATURE_MISSING_HUGETLBFS
;
314 error_report("Userfault on this host does not support huge pages");
321 /* Callback from postcopy_ram_supported_by_host block iterator.
323 static int test_ramblock_postcopiable(RAMBlock
*rb
, void *opaque
)
325 const char *block_name
= qemu_ram_get_idstr(rb
);
326 ram_addr_t length
= qemu_ram_get_used_length(rb
);
327 size_t pagesize
= qemu_ram_pagesize(rb
);
329 if (length
% pagesize
) {
330 error_report("Postcopy requires RAM blocks to be a page size multiple,"
331 " block %s is 0x" RAM_ADDR_FMT
" bytes with a "
332 "page size of 0x%zx", block_name
, length
, pagesize
);
339 * Note: This has the side effect of munlock'ing all of RAM, that's
340 * normally fine since if the postcopy succeeds it gets turned back on at the
343 bool postcopy_ram_supported_by_host(MigrationIncomingState
*mis
)
345 long pagesize
= qemu_real_host_page_size
;
347 bool ret
= false; /* Error unless we change it */
348 void *testarea
= NULL
;
349 struct uffdio_register reg_struct
;
350 struct uffdio_range range_struct
;
351 uint64_t feature_mask
;
352 Error
*local_err
= NULL
;
354 if (qemu_target_page_size() > pagesize
) {
355 error_report("Target page size bigger than host page size");
359 ufd
= syscall(__NR_userfaultfd
, O_CLOEXEC
);
361 error_report("%s: userfaultfd not available: %s", __func__
,
366 /* Give devices a chance to object */
367 if (postcopy_notify(POSTCOPY_NOTIFY_PROBE
, &local_err
)) {
368 error_report_err(local_err
);
372 /* Version and features check */
373 if (!ufd_check_and_apply(ufd
, mis
)) {
377 /* We don't support postcopy with shared RAM yet */
378 if (foreach_not_ignored_block(test_ramblock_postcopiable
, NULL
)) {
383 * userfault and mlock don't go together; we'll put it back later if
387 error_report("%s: munlockall: %s", __func__
, strerror(errno
));
392 * We need to check that the ops we need are supported on anon memory
393 * To do that we need to register a chunk and see the flags that
396 testarea
= mmap(NULL
, pagesize
, PROT_READ
| PROT_WRITE
, MAP_PRIVATE
|
397 MAP_ANONYMOUS
, -1, 0);
398 if (testarea
== MAP_FAILED
) {
399 error_report("%s: Failed to map test area: %s", __func__
,
403 g_assert(((size_t)testarea
& (pagesize
- 1)) == 0);
405 reg_struct
.range
.start
= (uintptr_t)testarea
;
406 reg_struct
.range
.len
= pagesize
;
407 reg_struct
.mode
= UFFDIO_REGISTER_MODE_MISSING
;
409 if (ioctl(ufd
, UFFDIO_REGISTER
, ®_struct
)) {
410 error_report("%s userfault register: %s", __func__
, strerror(errno
));
414 range_struct
.start
= (uintptr_t)testarea
;
415 range_struct
.len
= pagesize
;
416 if (ioctl(ufd
, UFFDIO_UNREGISTER
, &range_struct
)) {
417 error_report("%s userfault unregister: %s", __func__
, strerror(errno
));
421 feature_mask
= (__u64
)1 << _UFFDIO_WAKE
|
422 (__u64
)1 << _UFFDIO_COPY
|
423 (__u64
)1 << _UFFDIO_ZEROPAGE
;
424 if ((reg_struct
.ioctls
& feature_mask
) != feature_mask
) {
425 error_report("Missing userfault map features: %" PRIx64
,
426 (uint64_t)(~reg_struct
.ioctls
& feature_mask
));
434 munmap(testarea
, pagesize
);
443 * Setup an area of RAM so that it *can* be used for postcopy later; this
444 * must be done right at the start prior to pre-copy.
445 * opaque should be the MIS.
447 static int init_range(RAMBlock
*rb
, void *opaque
)
449 const char *block_name
= qemu_ram_get_idstr(rb
);
450 void *host_addr
= qemu_ram_get_host_addr(rb
);
451 ram_addr_t offset
= qemu_ram_get_offset(rb
);
452 ram_addr_t length
= qemu_ram_get_used_length(rb
);
453 trace_postcopy_init_range(block_name
, host_addr
, offset
, length
);
456 * We need the whole of RAM to be truly empty for postcopy, so things
457 * like ROMs and any data tables built during init must be zero'd
458 * - we're going to get the copy from the source anyway.
459 * (Precopy will just overwrite this data, so doesn't need the discard)
461 if (ram_discard_range(block_name
, 0, length
)) {
469 * At the end of migration, undo the effects of init_range
470 * opaque should be the MIS.
472 static int cleanup_range(RAMBlock
*rb
, void *opaque
)
474 const char *block_name
= qemu_ram_get_idstr(rb
);
475 void *host_addr
= qemu_ram_get_host_addr(rb
);
476 ram_addr_t offset
= qemu_ram_get_offset(rb
);
477 ram_addr_t length
= qemu_ram_get_used_length(rb
);
478 MigrationIncomingState
*mis
= opaque
;
479 struct uffdio_range range_struct
;
480 trace_postcopy_cleanup_range(block_name
, host_addr
, offset
, length
);
483 * We turned off hugepage for the precopy stage with postcopy enabled
484 * we can turn it back on now.
486 qemu_madvise(host_addr
, length
, QEMU_MADV_HUGEPAGE
);
489 * We can also turn off userfault now since we should have all the
490 * pages. It can be useful to leave it on to debug postcopy
491 * if you're not sure it's always getting every page.
493 range_struct
.start
= (uintptr_t)host_addr
;
494 range_struct
.len
= length
;
496 if (ioctl(mis
->userfault_fd
, UFFDIO_UNREGISTER
, &range_struct
)) {
497 error_report("%s: userfault unregister %s", __func__
, strerror(errno
));
506 * Initialise postcopy-ram, setting the RAM to a state where we can go into
507 * postcopy later; must be called prior to any precopy.
508 * called from arch_init's similarly named ram_postcopy_incoming_init
510 int postcopy_ram_incoming_init(MigrationIncomingState
*mis
)
512 if (foreach_not_ignored_block(init_range
, NULL
)) {
520 * At the end of a migration where postcopy_ram_incoming_init was called.
522 int postcopy_ram_incoming_cleanup(MigrationIncomingState
*mis
)
524 trace_postcopy_ram_incoming_cleanup_entry();
526 if (mis
->have_fault_thread
) {
527 Error
*local_err
= NULL
;
529 /* Let the fault thread quit */
530 qatomic_set(&mis
->fault_thread_quit
, 1);
531 postcopy_fault_thread_notify(mis
);
532 trace_postcopy_ram_incoming_cleanup_join();
533 qemu_thread_join(&mis
->fault_thread
);
535 if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_END
, &local_err
)) {
536 error_report_err(local_err
);
540 if (foreach_not_ignored_block(cleanup_range
, mis
)) {
544 trace_postcopy_ram_incoming_cleanup_closeuf();
545 close(mis
->userfault_fd
);
546 close(mis
->userfault_event_fd
);
547 mis
->have_fault_thread
= false;
551 if (os_mlock() < 0) {
552 error_report("mlock: %s", strerror(errno
));
554 * It doesn't feel right to fail at this point, we have a valid
560 if (mis
->postcopy_tmp_page
) {
561 munmap(mis
->postcopy_tmp_page
, mis
->largest_page_size
);
562 mis
->postcopy_tmp_page
= NULL
;
564 if (mis
->postcopy_tmp_zero_page
) {
565 munmap(mis
->postcopy_tmp_zero_page
, mis
->largest_page_size
);
566 mis
->postcopy_tmp_zero_page
= NULL
;
568 trace_postcopy_ram_incoming_cleanup_blocktime(
569 get_postcopy_total_blocktime());
571 trace_postcopy_ram_incoming_cleanup_exit();
576 * Disable huge pages on an area
578 static int nhp_range(RAMBlock
*rb
, void *opaque
)
580 const char *block_name
= qemu_ram_get_idstr(rb
);
581 void *host_addr
= qemu_ram_get_host_addr(rb
);
582 ram_addr_t offset
= qemu_ram_get_offset(rb
);
583 ram_addr_t length
= qemu_ram_get_used_length(rb
);
584 trace_postcopy_nhp_range(block_name
, host_addr
, offset
, length
);
587 * Before we do discards we need to ensure those discards really
588 * do delete areas of the page, even if THP thinks a hugepage would
589 * be a good idea, so force hugepages off.
591 qemu_madvise(host_addr
, length
, QEMU_MADV_NOHUGEPAGE
);
597 * Userfault requires us to mark RAM as NOHUGEPAGE prior to discard
598 * however leaving it until after precopy means that most of the precopy
601 int postcopy_ram_prepare_discard(MigrationIncomingState
*mis
)
603 if (foreach_not_ignored_block(nhp_range
, mis
)) {
607 postcopy_state_set(POSTCOPY_INCOMING_DISCARD
);
613 * Mark the given area of RAM as requiring notification to unwritten areas
614 * Used as a callback on foreach_not_ignored_block.
615 * host_addr: Base of area to mark
616 * offset: Offset in the whole ram arena
617 * length: Length of the section
618 * opaque: MigrationIncomingState pointer
619 * Returns 0 on success
621 static int ram_block_enable_notify(RAMBlock
*rb
, void *opaque
)
623 MigrationIncomingState
*mis
= opaque
;
624 struct uffdio_register reg_struct
;
626 reg_struct
.range
.start
= (uintptr_t)qemu_ram_get_host_addr(rb
);
627 reg_struct
.range
.len
= qemu_ram_get_used_length(rb
);
628 reg_struct
.mode
= UFFDIO_REGISTER_MODE_MISSING
;
630 /* Now tell our userfault_fd that it's responsible for this area */
631 if (ioctl(mis
->userfault_fd
, UFFDIO_REGISTER
, ®_struct
)) {
632 error_report("%s userfault register: %s", __func__
, strerror(errno
));
635 if (!(reg_struct
.ioctls
& ((__u64
)1 << _UFFDIO_COPY
))) {
636 error_report("%s userfault: Region doesn't support COPY", __func__
);
639 if (reg_struct
.ioctls
& ((__u64
)1 << _UFFDIO_ZEROPAGE
)) {
640 qemu_ram_set_uf_zeroable(rb
);
646 int postcopy_wake_shared(struct PostCopyFD
*pcfd
,
647 uint64_t client_addr
,
650 size_t pagesize
= qemu_ram_pagesize(rb
);
651 struct uffdio_range range
;
653 trace_postcopy_wake_shared(client_addr
, qemu_ram_get_idstr(rb
));
654 range
.start
= client_addr
& ~(pagesize
- 1);
655 range
.len
= pagesize
;
656 ret
= ioctl(pcfd
->fd
, UFFDIO_WAKE
, &range
);
658 error_report("%s: Failed to wake: %zx in %s (%s)",
659 __func__
, (size_t)client_addr
, qemu_ram_get_idstr(rb
),
666 * Callback from shared fault handlers to ask for a page,
667 * the page must be specified by a RAMBlock and an offset in that rb
668 * Note: Only for use by shared fault handlers (in fault thread)
670 int postcopy_request_shared_page(struct PostCopyFD
*pcfd
, RAMBlock
*rb
,
671 uint64_t client_addr
, uint64_t rb_offset
)
673 size_t pagesize
= qemu_ram_pagesize(rb
);
674 uint64_t aligned_rbo
= rb_offset
& ~(pagesize
- 1);
675 MigrationIncomingState
*mis
= migration_incoming_get_current();
677 trace_postcopy_request_shared_page(pcfd
->idstr
, qemu_ram_get_idstr(rb
),
679 if (ramblock_recv_bitmap_test_byte_offset(rb
, aligned_rbo
)) {
680 trace_postcopy_request_shared_page_present(pcfd
->idstr
,
681 qemu_ram_get_idstr(rb
), rb_offset
);
682 return postcopy_wake_shared(pcfd
, client_addr
, rb
);
684 migrate_send_rp_req_pages(mis
, rb
, aligned_rbo
, client_addr
);
688 static int get_mem_fault_cpu_index(uint32_t pid
)
692 CPU_FOREACH(cpu_iter
) {
693 if (cpu_iter
->thread_id
== pid
) {
694 trace_get_mem_fault_cpu_index(cpu_iter
->cpu_index
, pid
);
695 return cpu_iter
->cpu_index
;
698 trace_get_mem_fault_cpu_index(-1, pid
);
702 static uint32_t get_low_time_offset(PostcopyBlocktimeContext
*dc
)
704 int64_t start_time_offset
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
) -
706 return start_time_offset
< 1 ? 1 : start_time_offset
& UINT32_MAX
;
710 * This function is being called when pagefault occurs. It
711 * tracks down vCPU blocking time.
713 * @addr: faulted host virtual address
714 * @ptid: faulted process thread id
715 * @rb: ramblock appropriate to addr
717 static void mark_postcopy_blocktime_begin(uintptr_t addr
, uint32_t ptid
,
720 int cpu
, already_received
;
721 MigrationIncomingState
*mis
= migration_incoming_get_current();
722 PostcopyBlocktimeContext
*dc
= mis
->blocktime_ctx
;
723 uint32_t low_time_offset
;
725 if (!dc
|| ptid
== 0) {
728 cpu
= get_mem_fault_cpu_index(ptid
);
733 low_time_offset
= get_low_time_offset(dc
);
734 if (dc
->vcpu_addr
[cpu
] == 0) {
735 qatomic_inc(&dc
->smp_cpus_down
);
738 qatomic_xchg(&dc
->last_begin
, low_time_offset
);
739 qatomic_xchg(&dc
->page_fault_vcpu_time
[cpu
], low_time_offset
);
740 qatomic_xchg(&dc
->vcpu_addr
[cpu
], addr
);
743 * check it here, not at the beginning of the function,
744 * due to, check could occur early than bitmap_set in
745 * qemu_ufd_copy_ioctl
747 already_received
= ramblock_recv_bitmap_test(rb
, (void *)addr
);
748 if (already_received
) {
749 qatomic_xchg(&dc
->vcpu_addr
[cpu
], 0);
750 qatomic_xchg(&dc
->page_fault_vcpu_time
[cpu
], 0);
751 qatomic_dec(&dc
->smp_cpus_down
);
753 trace_mark_postcopy_blocktime_begin(addr
, dc
, dc
->page_fault_vcpu_time
[cpu
],
754 cpu
, already_received
);
758 * This function just provide calculated blocktime per cpu and trace it.
759 * Total blocktime is calculated in mark_postcopy_blocktime_end.
762 * Assume we have 3 CPU
765 * -----***********------------xxx***************------------------------> CPU1
768 * ------------****************xxx---------------------------------------> CPU2
771 * ------------------------****xxx********-------------------------------> CPU3
773 * We have sequence S1,S2,E1,S3,S1,E2,E3,E1
774 * S2,E1 - doesn't match condition due to sequence S1,S2,E1 doesn't include CPU3
775 * S3,S1,E2 - sequence includes all CPUs, in this case overlap will be S1,E2 -
776 * it's a part of total blocktime.
777 * S1 - here is last_begin
778 * Legend of the picture is following:
779 * * - means blocktime per vCPU
780 * x - means overlapped blocktime (total blocktime)
782 * @addr: host virtual address
784 static void mark_postcopy_blocktime_end(uintptr_t addr
)
786 MigrationIncomingState
*mis
= migration_incoming_get_current();
787 PostcopyBlocktimeContext
*dc
= mis
->blocktime_ctx
;
788 MachineState
*ms
= MACHINE(qdev_get_machine());
789 unsigned int smp_cpus
= ms
->smp
.cpus
;
790 int i
, affected_cpu
= 0;
791 bool vcpu_total_blocktime
= false;
792 uint32_t read_vcpu_time
, low_time_offset
;
798 low_time_offset
= get_low_time_offset(dc
);
799 /* lookup cpu, to clear it,
800 * that algorithm looks straightforward, but it's not
801 * optimal, more optimal algorithm is keeping tree or hash
802 * where key is address value is a list of */
803 for (i
= 0; i
< smp_cpus
; i
++) {
804 uint32_t vcpu_blocktime
= 0;
806 read_vcpu_time
= qatomic_fetch_add(&dc
->page_fault_vcpu_time
[i
], 0);
807 if (qatomic_fetch_add(&dc
->vcpu_addr
[i
], 0) != addr
||
808 read_vcpu_time
== 0) {
811 qatomic_xchg(&dc
->vcpu_addr
[i
], 0);
812 vcpu_blocktime
= low_time_offset
- read_vcpu_time
;
814 /* we need to know is that mark_postcopy_end was due to
815 * faulted page, another possible case it's prefetched
816 * page and in that case we shouldn't be here */
817 if (!vcpu_total_blocktime
&&
818 qatomic_fetch_add(&dc
->smp_cpus_down
, 0) == smp_cpus
) {
819 vcpu_total_blocktime
= true;
821 /* continue cycle, due to one page could affect several vCPUs */
822 dc
->vcpu_blocktime
[i
] += vcpu_blocktime
;
825 qatomic_sub(&dc
->smp_cpus_down
, affected_cpu
);
826 if (vcpu_total_blocktime
) {
827 dc
->total_blocktime
+= low_time_offset
- qatomic_fetch_add(
830 trace_mark_postcopy_blocktime_end(addr
, dc
, dc
->total_blocktime
,
834 static bool postcopy_pause_fault_thread(MigrationIncomingState
*mis
)
836 trace_postcopy_pause_fault_thread();
838 qemu_sem_wait(&mis
->postcopy_pause_sem_fault
);
840 trace_postcopy_pause_fault_thread_continued();
846 * Handle faults detected by the USERFAULT markings
848 static void *postcopy_ram_fault_thread(void *opaque
)
850 MigrationIncomingState
*mis
= opaque
;
856 trace_postcopy_ram_fault_thread_entry();
857 rcu_register_thread();
858 mis
->last_rb
= NULL
; /* last RAMBlock we sent part of */
859 qemu_sem_post(&mis
->fault_thread_sem
);
862 size_t pfd_len
= 2 + mis
->postcopy_remote_fds
->len
;
864 pfd
= g_new0(struct pollfd
, pfd_len
);
866 pfd
[0].fd
= mis
->userfault_fd
;
867 pfd
[0].events
= POLLIN
;
868 pfd
[1].fd
= mis
->userfault_event_fd
;
869 pfd
[1].events
= POLLIN
; /* Waiting for eventfd to go positive */
870 trace_postcopy_ram_fault_thread_fds_core(pfd
[0].fd
, pfd
[1].fd
);
871 for (index
= 0; index
< mis
->postcopy_remote_fds
->len
; index
++) {
872 struct PostCopyFD
*pcfd
= &g_array_index(mis
->postcopy_remote_fds
,
873 struct PostCopyFD
, index
);
874 pfd
[2 + index
].fd
= pcfd
->fd
;
875 pfd
[2 + index
].events
= POLLIN
;
876 trace_postcopy_ram_fault_thread_fds_extra(2 + index
, pcfd
->idstr
,
881 ram_addr_t rb_offset
;
885 * We're mainly waiting for the kernel to give us a faulting HVA,
886 * however we can be told to quit via userfault_quit_fd which is
890 poll_result
= poll(pfd
, pfd_len
, -1 /* Wait forever */);
891 if (poll_result
== -1) {
892 error_report("%s: userfault poll: %s", __func__
, strerror(errno
));
896 if (!mis
->to_src_file
) {
898 * Possibly someone tells us that the return path is
899 * broken already using the event. We should hold until
900 * the channel is rebuilt.
902 if (postcopy_pause_fault_thread(mis
)) {
903 /* Continue to read the userfaultfd */
905 error_report("%s: paused but don't allow to continue",
911 if (pfd
[1].revents
) {
914 /* Consume the signal */
915 if (read(mis
->userfault_event_fd
, &tmp64
, 8) != 8) {
916 /* Nothing obviously nicer than posting this error. */
917 error_report("%s: read() failed", __func__
);
920 if (qatomic_read(&mis
->fault_thread_quit
)) {
921 trace_postcopy_ram_fault_thread_quit();
926 if (pfd
[0].revents
) {
928 ret
= read(mis
->userfault_fd
, &msg
, sizeof(msg
));
929 if (ret
!= sizeof(msg
)) {
930 if (errno
== EAGAIN
) {
932 * if a wake up happens on the other thread just after
933 * the poll, there is nothing to read.
938 error_report("%s: Failed to read full userfault "
940 __func__
, strerror(errno
));
943 error_report("%s: Read %d bytes from userfaultfd "
945 __func__
, ret
, sizeof(msg
));
946 break; /* Lost alignment, don't know what we'd read next */
949 if (msg
.event
!= UFFD_EVENT_PAGEFAULT
) {
950 error_report("%s: Read unexpected event %ud from userfaultfd",
951 __func__
, msg
.event
);
952 continue; /* It's not a page fault, shouldn't happen */
955 rb
= qemu_ram_block_from_host(
956 (void *)(uintptr_t)msg
.arg
.pagefault
.address
,
959 error_report("postcopy_ram_fault_thread: Fault outside guest: %"
960 PRIx64
, (uint64_t)msg
.arg
.pagefault
.address
);
964 rb_offset
&= ~(qemu_ram_pagesize(rb
) - 1);
965 trace_postcopy_ram_fault_thread_request(msg
.arg
.pagefault
.address
,
966 qemu_ram_get_idstr(rb
),
968 msg
.arg
.pagefault
.feat
.ptid
);
969 mark_postcopy_blocktime_begin(
970 (uintptr_t)(msg
.arg
.pagefault
.address
),
971 msg
.arg
.pagefault
.feat
.ptid
, rb
);
975 * Send the request to the source - we want to request one
976 * of our host page sizes (which is >= TPS)
978 ret
= migrate_send_rp_req_pages(mis
, rb
, rb_offset
,
979 msg
.arg
.pagefault
.address
);
981 /* May be network failure, try to wait for recovery */
982 if (ret
== -EIO
&& postcopy_pause_fault_thread(mis
)) {
983 /* We got reconnected somehow, try to continue */
986 /* This is a unavoidable fault */
987 error_report("%s: migrate_send_rp_req_pages() get %d",
994 /* Now handle any requests from external processes on shared memory */
995 /* TODO: May need to handle devices deregistering during postcopy */
996 for (index
= 2; index
< pfd_len
&& poll_result
; index
++) {
997 if (pfd
[index
].revents
) {
998 struct PostCopyFD
*pcfd
=
999 &g_array_index(mis
->postcopy_remote_fds
,
1000 struct PostCopyFD
, index
- 2);
1003 if (pfd
[index
].revents
& POLLERR
) {
1004 error_report("%s: POLLERR on poll %zd fd=%d",
1005 __func__
, index
, pcfd
->fd
);
1006 pfd
[index
].events
= 0;
1010 ret
= read(pcfd
->fd
, &msg
, sizeof(msg
));
1011 if (ret
!= sizeof(msg
)) {
1012 if (errno
== EAGAIN
) {
1014 * if a wake up happens on the other thread just after
1015 * the poll, there is nothing to read.
1020 error_report("%s: Failed to read full userfault "
1021 "message: %s (shared) revents=%d",
1022 __func__
, strerror(errno
),
1023 pfd
[index
].revents
);
1024 /*TODO: Could just disable this sharer */
1027 error_report("%s: Read %d bytes from userfaultfd "
1028 "expected %zd (shared)",
1029 __func__
, ret
, sizeof(msg
));
1030 /*TODO: Could just disable this sharer */
1031 break; /*Lost alignment,don't know what we'd read next*/
1034 if (msg
.event
!= UFFD_EVENT_PAGEFAULT
) {
1035 error_report("%s: Read unexpected event %ud "
1036 "from userfaultfd (shared)",
1037 __func__
, msg
.event
);
1038 continue; /* It's not a page fault, shouldn't happen */
1040 /* Call the device handler registered with us */
1041 ret
= pcfd
->handler(pcfd
, &msg
);
1043 error_report("%s: Failed to resolve shared fault on %zd/%s",
1044 __func__
, index
, pcfd
->idstr
);
1045 /* TODO: Fail? Disable this sharer? */
1050 rcu_unregister_thread();
1051 trace_postcopy_ram_fault_thread_exit();
1056 int postcopy_ram_incoming_setup(MigrationIncomingState
*mis
)
1058 /* Open the fd for the kernel to give us userfaults */
1059 mis
->userfault_fd
= syscall(__NR_userfaultfd
, O_CLOEXEC
| O_NONBLOCK
);
1060 if (mis
->userfault_fd
== -1) {
1061 error_report("%s: Failed to open userfault fd: %s", __func__
,
1067 * Although the host check already tested the API, we need to
1068 * do the check again as an ABI handshake on the new fd.
1070 if (!ufd_check_and_apply(mis
->userfault_fd
, mis
)) {
1074 /* Now an eventfd we use to tell the fault-thread to quit */
1075 mis
->userfault_event_fd
= eventfd(0, EFD_CLOEXEC
);
1076 if (mis
->userfault_event_fd
== -1) {
1077 error_report("%s: Opening userfault_event_fd: %s", __func__
,
1079 close(mis
->userfault_fd
);
1083 qemu_sem_init(&mis
->fault_thread_sem
, 0);
1084 qemu_thread_create(&mis
->fault_thread
, "postcopy/fault",
1085 postcopy_ram_fault_thread
, mis
, QEMU_THREAD_JOINABLE
);
1086 qemu_sem_wait(&mis
->fault_thread_sem
);
1087 qemu_sem_destroy(&mis
->fault_thread_sem
);
1088 mis
->have_fault_thread
= true;
1090 /* Mark so that we get notified of accesses to unwritten areas */
1091 if (foreach_not_ignored_block(ram_block_enable_notify
, mis
)) {
1092 error_report("ram_block_enable_notify failed");
1096 mis
->postcopy_tmp_page
= mmap(NULL
, mis
->largest_page_size
,
1097 PROT_READ
| PROT_WRITE
, MAP_PRIVATE
|
1098 MAP_ANONYMOUS
, -1, 0);
1099 if (mis
->postcopy_tmp_page
== MAP_FAILED
) {
1100 mis
->postcopy_tmp_page
= NULL
;
1101 error_report("%s: Failed to map postcopy_tmp_page %s",
1102 __func__
, strerror(errno
));
1107 * Map large zero page when kernel can't use UFFDIO_ZEROPAGE for hugepages
1109 mis
->postcopy_tmp_zero_page
= mmap(NULL
, mis
->largest_page_size
,
1110 PROT_READ
| PROT_WRITE
,
1111 MAP_PRIVATE
| MAP_ANONYMOUS
,
1113 if (mis
->postcopy_tmp_zero_page
== MAP_FAILED
) {
1115 mis
->postcopy_tmp_zero_page
= NULL
;
1116 error_report("%s: Failed to map large zero page %s",
1117 __func__
, strerror(e
));
1120 memset(mis
->postcopy_tmp_zero_page
, '\0', mis
->largest_page_size
);
1122 trace_postcopy_ram_enable_notify();
1127 static int qemu_ufd_copy_ioctl(MigrationIncomingState
*mis
, void *host_addr
,
1128 void *from_addr
, uint64_t pagesize
, RAMBlock
*rb
)
1130 int userfault_fd
= mis
->userfault_fd
;
1134 struct uffdio_copy copy_struct
;
1135 copy_struct
.dst
= (uint64_t)(uintptr_t)host_addr
;
1136 copy_struct
.src
= (uint64_t)(uintptr_t)from_addr
;
1137 copy_struct
.len
= pagesize
;
1138 copy_struct
.mode
= 0;
1139 ret
= ioctl(userfault_fd
, UFFDIO_COPY
, ©_struct
);
1141 struct uffdio_zeropage zero_struct
;
1142 zero_struct
.range
.start
= (uint64_t)(uintptr_t)host_addr
;
1143 zero_struct
.range
.len
= pagesize
;
1144 zero_struct
.mode
= 0;
1145 ret
= ioctl(userfault_fd
, UFFDIO_ZEROPAGE
, &zero_struct
);
1148 qemu_mutex_lock(&mis
->page_request_mutex
);
1149 ramblock_recv_bitmap_set_range(rb
, host_addr
,
1150 pagesize
/ qemu_target_page_size());
1152 * If this page resolves a page fault for a previous recorded faulted
1153 * address, take a special note to maintain the requested page list.
1155 if (g_tree_lookup(mis
->page_requested
, host_addr
)) {
1156 g_tree_remove(mis
->page_requested
, host_addr
);
1157 mis
->page_requested_count
--;
1158 trace_postcopy_page_req_del(host_addr
, mis
->page_requested_count
);
1160 qemu_mutex_unlock(&mis
->page_request_mutex
);
1161 mark_postcopy_blocktime_end((uintptr_t)host_addr
);
1166 int postcopy_notify_shared_wake(RAMBlock
*rb
, uint64_t offset
)
1169 MigrationIncomingState
*mis
= migration_incoming_get_current();
1170 GArray
*pcrfds
= mis
->postcopy_remote_fds
;
1172 for (i
= 0; i
< pcrfds
->len
; i
++) {
1173 struct PostCopyFD
*cur
= &g_array_index(pcrfds
, struct PostCopyFD
, i
);
1174 int ret
= cur
->waker(cur
, rb
, offset
);
1183 * Place a host page (from) at (host) atomically
1184 * returns 0 on success
1186 int postcopy_place_page(MigrationIncomingState
*mis
, void *host
, void *from
,
1189 size_t pagesize
= qemu_ram_pagesize(rb
);
1191 /* copy also acks to the kernel waking the stalled thread up
1192 * TODO: We can inhibit that ack and only do it if it was requested
1193 * which would be slightly cheaper, but we'd have to be careful
1194 * of the order of updating our page state.
1196 if (qemu_ufd_copy_ioctl(mis
, host
, from
, pagesize
, rb
)) {
1198 error_report("%s: %s copy host: %p from: %p (size: %zd)",
1199 __func__
, strerror(e
), host
, from
, pagesize
);
1204 trace_postcopy_place_page(host
);
1205 return postcopy_notify_shared_wake(rb
,
1206 qemu_ram_block_host_offset(rb
, host
));
1210 * Place a zero page at (host) atomically
1211 * returns 0 on success
1213 int postcopy_place_page_zero(MigrationIncomingState
*mis
, void *host
,
1216 size_t pagesize
= qemu_ram_pagesize(rb
);
1217 trace_postcopy_place_page_zero(host
);
1219 /* Normal RAMBlocks can zero a page using UFFDIO_ZEROPAGE
1220 * but it's not available for everything (e.g. hugetlbpages)
1222 if (qemu_ram_is_uf_zeroable(rb
)) {
1223 if (qemu_ufd_copy_ioctl(mis
, host
, NULL
, pagesize
, rb
)) {
1225 error_report("%s: %s zero host: %p",
1226 __func__
, strerror(e
), host
);
1230 return postcopy_notify_shared_wake(rb
,
1231 qemu_ram_block_host_offset(rb
,
1234 return postcopy_place_page(mis
, host
, mis
->postcopy_tmp_zero_page
, rb
);
1239 /* No target OS support, stubs just fail */
1240 void fill_destination_postcopy_migration_info(MigrationInfo
*info
)
1244 bool postcopy_ram_supported_by_host(MigrationIncomingState
*mis
)
1246 error_report("%s: No OS support", __func__
);
1250 int postcopy_ram_incoming_init(MigrationIncomingState
*mis
)
1252 error_report("postcopy_ram_incoming_init: No OS support");
1256 int postcopy_ram_incoming_cleanup(MigrationIncomingState
*mis
)
1262 int postcopy_ram_prepare_discard(MigrationIncomingState
*mis
)
1268 int postcopy_request_shared_page(struct PostCopyFD
*pcfd
, RAMBlock
*rb
,
1269 uint64_t client_addr
, uint64_t rb_offset
)
1275 int postcopy_ram_incoming_setup(MigrationIncomingState
*mis
)
1281 int postcopy_place_page(MigrationIncomingState
*mis
, void *host
, void *from
,
1288 int postcopy_place_page_zero(MigrationIncomingState
*mis
, void *host
,
1295 int postcopy_wake_shared(struct PostCopyFD
*pcfd
,
1296 uint64_t client_addr
,
1304 /* ------------------------------------------------------------------------- */
1306 void postcopy_fault_thread_notify(MigrationIncomingState
*mis
)
1311 * Wakeup the fault_thread. It's an eventfd that should currently
1312 * be at 0, we're going to increment it to 1
1314 if (write(mis
->userfault_event_fd
, &tmp64
, 8) != 8) {
1315 /* Not much we can do here, but may as well report it */
1316 error_report("%s: incrementing failed: %s", __func__
,
1322 * postcopy_discard_send_init: Called at the start of each RAMBlock before
1323 * asking to discard individual ranges.
1325 * @ms: The current migration state.
1326 * @offset: the bitmap offset of the named RAMBlock in the migration bitmap.
1327 * @name: RAMBlock that discards will operate on.
1329 static PostcopyDiscardState pds
= {0};
1330 void postcopy_discard_send_init(MigrationState
*ms
, const char *name
)
1332 pds
.ramblock_name
= name
;
1339 * postcopy_discard_send_range: Called by the bitmap code for each chunk to
1340 * discard. May send a discard message, may just leave it queued to
1343 * @ms: Current migration state.
1344 * @start,@length: a range of pages in the migration bitmap in the
1345 * RAM block passed to postcopy_discard_send_init() (length=1 is one page)
1347 void postcopy_discard_send_range(MigrationState
*ms
, unsigned long start
,
1348 unsigned long length
)
1350 size_t tp_size
= qemu_target_page_size();
1351 /* Convert to byte offsets within the RAM block */
1352 pds
.start_list
[pds
.cur_entry
] = start
* tp_size
;
1353 pds
.length_list
[pds
.cur_entry
] = length
* tp_size
;
1354 trace_postcopy_discard_send_range(pds
.ramblock_name
, start
, length
);
1358 if (pds
.cur_entry
== MAX_DISCARDS_PER_COMMAND
) {
1359 /* Full set, ship it! */
1360 qemu_savevm_send_postcopy_ram_discard(ms
->to_dst_file
,
1371 * postcopy_discard_send_finish: Called at the end of each RAMBlock by the
1372 * bitmap code. Sends any outstanding discard messages, frees the PDS
1374 * @ms: Current migration state.
1376 void postcopy_discard_send_finish(MigrationState
*ms
)
1378 /* Anything unsent? */
1379 if (pds
.cur_entry
) {
1380 qemu_savevm_send_postcopy_ram_discard(ms
->to_dst_file
,
1388 trace_postcopy_discard_send_finish(pds
.ramblock_name
, pds
.nsentwords
,
1393 * Current state of incoming postcopy; note this is not part of
1394 * MigrationIncomingState since it's state is used during cleanup
1395 * at the end as MIS is being freed.
1397 static PostcopyState incoming_postcopy_state
;
1399 PostcopyState
postcopy_state_get(void)
1401 return qatomic_mb_read(&incoming_postcopy_state
);
1404 /* Set the state and return the old state */
1405 PostcopyState
postcopy_state_set(PostcopyState new_state
)
1407 return qatomic_xchg(&incoming_postcopy_state
, new_state
);
1410 /* Register a handler for external shared memory postcopy
1411 * called on the destination.
1413 void postcopy_register_shared_ufd(struct PostCopyFD
*pcfd
)
1415 MigrationIncomingState
*mis
= migration_incoming_get_current();
1417 mis
->postcopy_remote_fds
= g_array_append_val(mis
->postcopy_remote_fds
,
1421 /* Unregister a handler for external shared memory postcopy
1423 void postcopy_unregister_shared_ufd(struct PostCopyFD
*pcfd
)
1426 MigrationIncomingState
*mis
= migration_incoming_get_current();
1427 GArray
*pcrfds
= mis
->postcopy_remote_fds
;
1429 for (i
= 0; i
< pcrfds
->len
; i
++) {
1430 struct PostCopyFD
*cur
= &g_array_index(pcrfds
, struct PostCopyFD
, i
);
1431 if (cur
->fd
== pcfd
->fd
) {
1432 mis
->postcopy_remote_fds
= g_array_remove_index(pcrfds
, i
);