hw/block/nand: Factor nand_load_iolen() method out
[qemu/kevin.git] / net / vhost-vdpa.c
blob85e73dd6a73f069ff547368240b07512fd550cc8
1 /*
2 * vhost-vdpa.c
4 * Copyright(c) 2017-2018 Intel Corporation.
5 * Copyright(c) 2020 Red Hat, Inc.
7 * This work is licensed under the terms of the GNU GPL, version 2 or later.
8 * See the COPYING file in the top-level directory.
12 #include "qemu/osdep.h"
13 #include "clients.h"
14 #include "hw/virtio/virtio-net.h"
15 #include "net/vhost_net.h"
16 #include "net/vhost-vdpa.h"
17 #include "hw/virtio/vhost-vdpa.h"
18 #include "qemu/config-file.h"
19 #include "qemu/error-report.h"
20 #include "qemu/log.h"
21 #include "qemu/memalign.h"
22 #include "qemu/option.h"
23 #include "qapi/error.h"
24 #include <linux/vhost.h>
25 #include <sys/ioctl.h>
26 #include <err.h>
27 #include "standard-headers/linux/virtio_net.h"
28 #include "monitor/monitor.h"
29 #include "migration/misc.h"
30 #include "hw/virtio/vhost.h"
31 #include "trace.h"
33 /* Todo:need to add the multiqueue support here */
34 typedef struct VhostVDPAState {
35 NetClientState nc;
36 struct vhost_vdpa vhost_vdpa;
37 NotifierWithReturn migration_state;
38 VHostNetState *vhost_net;
40 /* Control commands shadow buffers */
41 void *cvq_cmd_out_buffer;
42 virtio_net_ctrl_ack *status;
44 /* The device always have SVQ enabled */
45 bool always_svq;
47 /* The device can isolate CVQ in its own ASID */
48 bool cvq_isolated;
50 bool started;
51 } VhostVDPAState;
54 * The array is sorted alphabetically in ascending order,
55 * with the exception of VHOST_INVALID_FEATURE_BIT,
56 * which should always be the last entry.
58 const int vdpa_feature_bits[] = {
59 VIRTIO_F_ANY_LAYOUT,
60 VIRTIO_F_IOMMU_PLATFORM,
61 VIRTIO_F_NOTIFY_ON_EMPTY,
62 VIRTIO_F_RING_PACKED,
63 VIRTIO_F_RING_RESET,
64 VIRTIO_F_VERSION_1,
65 VIRTIO_NET_F_CSUM,
66 VIRTIO_NET_F_CTRL_GUEST_OFFLOADS,
67 VIRTIO_NET_F_CTRL_MAC_ADDR,
68 VIRTIO_NET_F_CTRL_RX,
69 VIRTIO_NET_F_CTRL_RX_EXTRA,
70 VIRTIO_NET_F_CTRL_VLAN,
71 VIRTIO_NET_F_CTRL_VQ,
72 VIRTIO_NET_F_GSO,
73 VIRTIO_NET_F_GUEST_CSUM,
74 VIRTIO_NET_F_GUEST_ECN,
75 VIRTIO_NET_F_GUEST_TSO4,
76 VIRTIO_NET_F_GUEST_TSO6,
77 VIRTIO_NET_F_GUEST_UFO,
78 VIRTIO_NET_F_GUEST_USO4,
79 VIRTIO_NET_F_GUEST_USO6,
80 VIRTIO_NET_F_HASH_REPORT,
81 VIRTIO_NET_F_HOST_ECN,
82 VIRTIO_NET_F_HOST_TSO4,
83 VIRTIO_NET_F_HOST_TSO6,
84 VIRTIO_NET_F_HOST_UFO,
85 VIRTIO_NET_F_HOST_USO,
86 VIRTIO_NET_F_MQ,
87 VIRTIO_NET_F_MRG_RXBUF,
88 VIRTIO_NET_F_MTU,
89 VIRTIO_NET_F_RSS,
90 VIRTIO_NET_F_STATUS,
91 VIRTIO_RING_F_EVENT_IDX,
92 VIRTIO_RING_F_INDIRECT_DESC,
94 /* VHOST_INVALID_FEATURE_BIT should always be the last entry */
95 VHOST_INVALID_FEATURE_BIT
98 /** Supported device specific feature bits with SVQ */
99 static const uint64_t vdpa_svq_device_features =
100 BIT_ULL(VIRTIO_NET_F_CSUM) |
101 BIT_ULL(VIRTIO_NET_F_GUEST_CSUM) |
102 BIT_ULL(VIRTIO_NET_F_CTRL_GUEST_OFFLOADS) |
103 BIT_ULL(VIRTIO_NET_F_MTU) |
104 BIT_ULL(VIRTIO_NET_F_MAC) |
105 BIT_ULL(VIRTIO_NET_F_GUEST_TSO4) |
106 BIT_ULL(VIRTIO_NET_F_GUEST_TSO6) |
107 BIT_ULL(VIRTIO_NET_F_GUEST_ECN) |
108 BIT_ULL(VIRTIO_NET_F_GUEST_UFO) |
109 BIT_ULL(VIRTIO_NET_F_HOST_TSO4) |
110 BIT_ULL(VIRTIO_NET_F_HOST_TSO6) |
111 BIT_ULL(VIRTIO_NET_F_HOST_ECN) |
112 BIT_ULL(VIRTIO_NET_F_HOST_UFO) |
113 BIT_ULL(VIRTIO_NET_F_MRG_RXBUF) |
114 BIT_ULL(VIRTIO_NET_F_STATUS) |
115 BIT_ULL(VIRTIO_NET_F_CTRL_VQ) |
116 BIT_ULL(VIRTIO_NET_F_CTRL_RX) |
117 BIT_ULL(VIRTIO_NET_F_CTRL_VLAN) |
118 BIT_ULL(VIRTIO_NET_F_CTRL_RX_EXTRA) |
119 BIT_ULL(VIRTIO_NET_F_MQ) |
120 BIT_ULL(VIRTIO_F_ANY_LAYOUT) |
121 BIT_ULL(VIRTIO_NET_F_CTRL_MAC_ADDR) |
122 /* VHOST_F_LOG_ALL is exposed by SVQ */
123 BIT_ULL(VHOST_F_LOG_ALL) |
124 BIT_ULL(VIRTIO_NET_F_HASH_REPORT) |
125 BIT_ULL(VIRTIO_NET_F_RSS) |
126 BIT_ULL(VIRTIO_NET_F_RSC_EXT) |
127 BIT_ULL(VIRTIO_NET_F_STANDBY) |
128 BIT_ULL(VIRTIO_NET_F_SPEED_DUPLEX);
130 #define VHOST_VDPA_NET_CVQ_ASID 1
132 VHostNetState *vhost_vdpa_get_vhost_net(NetClientState *nc)
134 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
135 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
136 return s->vhost_net;
139 static size_t vhost_vdpa_net_cvq_cmd_len(void)
142 * MAC_TABLE_SET is the ctrl command that produces the longer out buffer.
143 * In buffer is always 1 byte, so it should fit here
145 return sizeof(struct virtio_net_ctrl_hdr) +
146 2 * sizeof(struct virtio_net_ctrl_mac) +
147 MAC_TABLE_ENTRIES * ETH_ALEN;
150 static size_t vhost_vdpa_net_cvq_cmd_page_len(void)
152 return ROUND_UP(vhost_vdpa_net_cvq_cmd_len(), qemu_real_host_page_size());
155 static bool vhost_vdpa_net_valid_svq_features(uint64_t features, Error **errp)
157 uint64_t invalid_dev_features =
158 features & ~vdpa_svq_device_features &
159 /* Transport are all accepted at this point */
160 ~MAKE_64BIT_MASK(VIRTIO_TRANSPORT_F_START,
161 VIRTIO_TRANSPORT_F_END - VIRTIO_TRANSPORT_F_START);
163 if (invalid_dev_features) {
164 error_setg(errp, "vdpa svq does not work with features 0x%" PRIx64,
165 invalid_dev_features);
166 return false;
169 return vhost_svq_valid_features(features, errp);
172 static int vhost_vdpa_net_check_device_id(struct vhost_net *net)
174 uint32_t device_id;
175 int ret;
176 struct vhost_dev *hdev;
178 hdev = (struct vhost_dev *)&net->dev;
179 ret = hdev->vhost_ops->vhost_get_device_id(hdev, &device_id);
180 if (device_id != VIRTIO_ID_NET) {
181 return -ENOTSUP;
183 return ret;
186 static int vhost_vdpa_add(NetClientState *ncs, void *be,
187 int queue_pair_index, int nvqs)
189 VhostNetOptions options;
190 struct vhost_net *net = NULL;
191 VhostVDPAState *s;
192 int ret;
194 options.backend_type = VHOST_BACKEND_TYPE_VDPA;
195 assert(ncs->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
196 s = DO_UPCAST(VhostVDPAState, nc, ncs);
197 options.net_backend = ncs;
198 options.opaque = be;
199 options.busyloop_timeout = 0;
200 options.nvqs = nvqs;
202 net = vhost_net_init(&options);
203 if (!net) {
204 error_report("failed to init vhost_net for queue");
205 goto err_init;
207 s->vhost_net = net;
208 ret = vhost_vdpa_net_check_device_id(net);
209 if (ret) {
210 goto err_check;
212 return 0;
213 err_check:
214 vhost_net_cleanup(net);
215 g_free(net);
216 err_init:
217 return -1;
220 static void vhost_vdpa_cleanup(NetClientState *nc)
222 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
225 * If a peer NIC is attached, do not cleanup anything.
226 * Cleanup will happen as a part of qemu_cleanup() -> net_cleanup()
227 * when the guest is shutting down.
229 if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
230 return;
232 munmap(s->cvq_cmd_out_buffer, vhost_vdpa_net_cvq_cmd_page_len());
233 munmap(s->status, vhost_vdpa_net_cvq_cmd_page_len());
234 if (s->vhost_net) {
235 vhost_net_cleanup(s->vhost_net);
236 g_free(s->vhost_net);
237 s->vhost_net = NULL;
239 if (s->vhost_vdpa.index != 0) {
240 return;
242 qemu_close(s->vhost_vdpa.shared->device_fd);
243 g_free(s->vhost_vdpa.shared);
246 /** Dummy SetSteeringEBPF to support RSS for vhost-vdpa backend */
247 static bool vhost_vdpa_set_steering_ebpf(NetClientState *nc, int prog_fd)
249 return true;
252 static bool vhost_vdpa_has_vnet_hdr(NetClientState *nc)
254 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
256 return true;
259 static bool vhost_vdpa_has_ufo(NetClientState *nc)
261 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
262 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
263 uint64_t features = 0;
264 features |= (1ULL << VIRTIO_NET_F_HOST_UFO);
265 features = vhost_net_get_features(s->vhost_net, features);
266 return !!(features & (1ULL << VIRTIO_NET_F_HOST_UFO));
270 static bool vhost_vdpa_check_peer_type(NetClientState *nc, ObjectClass *oc,
271 Error **errp)
273 const char *driver = object_class_get_name(oc);
275 if (!g_str_has_prefix(driver, "virtio-net-")) {
276 error_setg(errp, "vhost-vdpa requires frontend driver virtio-net-*");
277 return false;
280 return true;
283 /** Dummy receive in case qemu falls back to userland tap networking */
284 static ssize_t vhost_vdpa_receive(NetClientState *nc, const uint8_t *buf,
285 size_t size)
287 return size;
291 /** From any vdpa net client, get the netclient of the i-th queue pair */
292 static VhostVDPAState *vhost_vdpa_net_get_nc_vdpa(VhostVDPAState *s, int i)
294 NICState *nic = qemu_get_nic(s->nc.peer);
295 NetClientState *nc_i = qemu_get_peer(nic->ncs, i);
297 return DO_UPCAST(VhostVDPAState, nc, nc_i);
300 static VhostVDPAState *vhost_vdpa_net_first_nc_vdpa(VhostVDPAState *s)
302 return vhost_vdpa_net_get_nc_vdpa(s, 0);
305 static void vhost_vdpa_net_log_global_enable(VhostVDPAState *s, bool enable)
307 struct vhost_vdpa *v = &s->vhost_vdpa;
308 VirtIONet *n;
309 VirtIODevice *vdev;
310 int data_queue_pairs, cvq, r;
312 /* We are only called on the first data vqs and only if x-svq is not set */
313 if (s->vhost_vdpa.shadow_vqs_enabled == enable) {
314 return;
317 vdev = v->dev->vdev;
318 n = VIRTIO_NET(vdev);
319 if (!n->vhost_started) {
320 return;
323 data_queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
324 cvq = virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) ?
325 n->max_ncs - n->max_queue_pairs : 0;
326 v->shared->svq_switching = enable ?
327 SVQ_TSTATE_ENABLING : SVQ_TSTATE_DISABLING;
329 * TODO: vhost_net_stop does suspend, get_base and reset. We can be smarter
330 * in the future and resume the device if read-only operations between
331 * suspend and reset goes wrong.
333 vhost_net_stop(vdev, n->nic->ncs, data_queue_pairs, cvq);
335 /* Start will check migration setup_or_active to configure or not SVQ */
336 r = vhost_net_start(vdev, n->nic->ncs, data_queue_pairs, cvq);
337 if (unlikely(r < 0)) {
338 error_report("unable to start vhost net: %s(%d)", g_strerror(-r), -r);
340 v->shared->svq_switching = SVQ_TSTATE_DONE;
343 static int vdpa_net_migration_state_notifier(NotifierWithReturn *notifier,
344 MigrationEvent *e, Error **errp)
346 VhostVDPAState *s = container_of(notifier, VhostVDPAState, migration_state);
348 if (e->type == MIG_EVENT_PRECOPY_SETUP) {
349 vhost_vdpa_net_log_global_enable(s, true);
350 } else if (e->type == MIG_EVENT_PRECOPY_FAILED) {
351 vhost_vdpa_net_log_global_enable(s, false);
353 return 0;
356 static void vhost_vdpa_net_data_start_first(VhostVDPAState *s)
358 struct vhost_vdpa *v = &s->vhost_vdpa;
360 migration_add_notifier(&s->migration_state,
361 vdpa_net_migration_state_notifier);
362 if (v->shadow_vqs_enabled) {
363 v->shared->iova_tree = vhost_iova_tree_new(v->shared->iova_range.first,
364 v->shared->iova_range.last);
368 static int vhost_vdpa_net_data_start(NetClientState *nc)
370 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
371 struct vhost_vdpa *v = &s->vhost_vdpa;
373 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
375 if (s->always_svq ||
376 migration_is_setup_or_active()) {
377 v->shadow_vqs_enabled = true;
378 } else {
379 v->shadow_vqs_enabled = false;
382 if (v->index == 0) {
383 v->shared->shadow_data = v->shadow_vqs_enabled;
384 vhost_vdpa_net_data_start_first(s);
385 return 0;
388 return 0;
391 static int vhost_vdpa_net_data_load(NetClientState *nc)
393 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
394 struct vhost_vdpa *v = &s->vhost_vdpa;
395 bool has_cvq = v->dev->vq_index_end % 2;
397 if (has_cvq) {
398 return 0;
401 for (int i = 0; i < v->dev->nvqs; ++i) {
402 vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
404 return 0;
407 static void vhost_vdpa_net_client_stop(NetClientState *nc)
409 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
410 struct vhost_dev *dev;
412 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
414 if (s->vhost_vdpa.index == 0) {
415 migration_remove_notifier(&s->migration_state);
418 dev = s->vhost_vdpa.dev;
419 if (dev->vq_index + dev->nvqs == dev->vq_index_end) {
420 g_clear_pointer(&s->vhost_vdpa.shared->iova_tree,
421 vhost_iova_tree_delete);
425 static NetClientInfo net_vhost_vdpa_info = {
426 .type = NET_CLIENT_DRIVER_VHOST_VDPA,
427 .size = sizeof(VhostVDPAState),
428 .receive = vhost_vdpa_receive,
429 .start = vhost_vdpa_net_data_start,
430 .load = vhost_vdpa_net_data_load,
431 .stop = vhost_vdpa_net_client_stop,
432 .cleanup = vhost_vdpa_cleanup,
433 .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
434 .has_ufo = vhost_vdpa_has_ufo,
435 .check_peer_type = vhost_vdpa_check_peer_type,
436 .set_steering_ebpf = vhost_vdpa_set_steering_ebpf,
439 static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index,
440 Error **errp)
442 struct vhost_vring_state state = {
443 .index = vq_index,
445 int r = ioctl(device_fd, VHOST_VDPA_GET_VRING_GROUP, &state);
447 if (unlikely(r < 0)) {
448 r = -errno;
449 error_setg_errno(errp, errno, "Cannot get VQ %u group", vq_index);
450 return r;
453 return state.num;
456 static int vhost_vdpa_set_address_space_id(struct vhost_vdpa *v,
457 unsigned vq_group,
458 unsigned asid_num)
460 struct vhost_vring_state asid = {
461 .index = vq_group,
462 .num = asid_num,
464 int r;
466 trace_vhost_vdpa_set_address_space_id(v, vq_group, asid_num);
468 r = ioctl(v->shared->device_fd, VHOST_VDPA_SET_GROUP_ASID, &asid);
469 if (unlikely(r < 0)) {
470 error_report("Can't set vq group %u asid %u, errno=%d (%s)",
471 asid.index, asid.num, errno, g_strerror(errno));
473 return r;
476 static void vhost_vdpa_cvq_unmap_buf(struct vhost_vdpa *v, void *addr)
478 VhostIOVATree *tree = v->shared->iova_tree;
479 DMAMap needle = {
481 * No need to specify size or to look for more translations since
482 * this contiguous chunk was allocated by us.
484 .translated_addr = (hwaddr)(uintptr_t)addr,
486 const DMAMap *map = vhost_iova_tree_find_iova(tree, &needle);
487 int r;
489 if (unlikely(!map)) {
490 error_report("Cannot locate expected map");
491 return;
494 r = vhost_vdpa_dma_unmap(v->shared, v->address_space_id, map->iova,
495 map->size + 1);
496 if (unlikely(r != 0)) {
497 error_report("Device cannot unmap: %s(%d)", g_strerror(r), r);
500 vhost_iova_tree_remove(tree, *map);
503 /** Map CVQ buffer. */
504 static int vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, void *buf, size_t size,
505 bool write)
507 DMAMap map = {};
508 int r;
510 map.translated_addr = (hwaddr)(uintptr_t)buf;
511 map.size = size - 1;
512 map.perm = write ? IOMMU_RW : IOMMU_RO,
513 r = vhost_iova_tree_map_alloc(v->shared->iova_tree, &map);
514 if (unlikely(r != IOVA_OK)) {
515 error_report("Cannot map injected element");
516 return r;
519 r = vhost_vdpa_dma_map(v->shared, v->address_space_id, map.iova,
520 vhost_vdpa_net_cvq_cmd_page_len(), buf, !write);
521 if (unlikely(r < 0)) {
522 goto dma_map_err;
525 return 0;
527 dma_map_err:
528 vhost_iova_tree_remove(v->shared->iova_tree, map);
529 return r;
532 static int vhost_vdpa_net_cvq_start(NetClientState *nc)
534 VhostVDPAState *s, *s0;
535 struct vhost_vdpa *v;
536 int64_t cvq_group;
537 int r;
538 Error *err = NULL;
540 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
542 s = DO_UPCAST(VhostVDPAState, nc, nc);
543 v = &s->vhost_vdpa;
545 s0 = vhost_vdpa_net_first_nc_vdpa(s);
546 v->shadow_vqs_enabled = s0->vhost_vdpa.shadow_vqs_enabled;
547 s->vhost_vdpa.address_space_id = VHOST_VDPA_GUEST_PA_ASID;
549 if (v->shared->shadow_data) {
550 /* SVQ is already configured for all virtqueues */
551 goto out;
555 * If we early return in these cases SVQ will not be enabled. The migration
556 * will be blocked as long as vhost-vdpa backends will not offer _F_LOG.
558 if (!vhost_vdpa_net_valid_svq_features(v->dev->features, NULL)) {
559 return 0;
562 if (!s->cvq_isolated) {
563 return 0;
566 cvq_group = vhost_vdpa_get_vring_group(v->shared->device_fd,
567 v->dev->vq_index_end - 1,
568 &err);
569 if (unlikely(cvq_group < 0)) {
570 error_report_err(err);
571 return cvq_group;
574 r = vhost_vdpa_set_address_space_id(v, cvq_group, VHOST_VDPA_NET_CVQ_ASID);
575 if (unlikely(r < 0)) {
576 return r;
579 v->shadow_vqs_enabled = true;
580 s->vhost_vdpa.address_space_id = VHOST_VDPA_NET_CVQ_ASID;
582 out:
583 if (!s->vhost_vdpa.shadow_vqs_enabled) {
584 return 0;
588 * If other vhost_vdpa already have an iova_tree, reuse it for simplicity,
589 * whether CVQ shares ASID with guest or not, because:
590 * - Memory listener need access to guest's memory addresses allocated in
591 * the IOVA tree.
592 * - There should be plenty of IOVA address space for both ASID not to
593 * worry about collisions between them. Guest's translations are still
594 * validated with virtio virtqueue_pop so there is no risk for the guest
595 * to access memory that it shouldn't.
597 * To allocate a iova tree per ASID is doable but it complicates the code
598 * and it is not worth it for the moment.
600 if (!v->shared->iova_tree) {
601 v->shared->iova_tree = vhost_iova_tree_new(v->shared->iova_range.first,
602 v->shared->iova_range.last);
605 r = vhost_vdpa_cvq_map_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer,
606 vhost_vdpa_net_cvq_cmd_page_len(), false);
607 if (unlikely(r < 0)) {
608 return r;
611 r = vhost_vdpa_cvq_map_buf(&s->vhost_vdpa, s->status,
612 vhost_vdpa_net_cvq_cmd_page_len(), true);
613 if (unlikely(r < 0)) {
614 vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer);
617 return r;
620 static void vhost_vdpa_net_cvq_stop(NetClientState *nc)
622 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
624 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
626 if (s->vhost_vdpa.shadow_vqs_enabled) {
627 vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer);
628 vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->status);
631 vhost_vdpa_net_client_stop(nc);
634 static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s,
635 const struct iovec *out_sg, size_t out_num,
636 const struct iovec *in_sg, size_t in_num)
638 VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
639 int r;
641 r = vhost_svq_add(svq, out_sg, out_num, in_sg, in_num, NULL);
642 if (unlikely(r != 0)) {
643 if (unlikely(r == -ENOSPC)) {
644 qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",
645 __func__);
649 return r;
653 * Convenience wrapper to poll SVQ for multiple control commands.
655 * Caller should hold the BQL when invoking this function, and should take
656 * the answer before SVQ pulls by itself when BQL is released.
658 static ssize_t vhost_vdpa_net_svq_poll(VhostVDPAState *s, size_t cmds_in_flight)
660 VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
661 return vhost_svq_poll(svq, cmds_in_flight);
664 static void vhost_vdpa_net_load_cursor_reset(VhostVDPAState *s,
665 struct iovec *out_cursor,
666 struct iovec *in_cursor)
668 /* reset the cursor of the output buffer for the device */
669 out_cursor->iov_base = s->cvq_cmd_out_buffer;
670 out_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len();
672 /* reset the cursor of the in buffer for the device */
673 in_cursor->iov_base = s->status;
674 in_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len();
678 * Poll SVQ for multiple pending control commands and check the device's ack.
680 * Caller should hold the BQL when invoking this function.
682 * @s: The VhostVDPAState
683 * @len: The length of the pending status shadow buffer
685 static ssize_t vhost_vdpa_net_svq_flush(VhostVDPAState *s, size_t len)
687 /* device uses a one-byte length ack for each control command */
688 ssize_t dev_written = vhost_vdpa_net_svq_poll(s, len);
689 if (unlikely(dev_written != len)) {
690 return -EIO;
693 /* check the device's ack */
694 for (int i = 0; i < len; ++i) {
695 if (s->status[i] != VIRTIO_NET_OK) {
696 return -EIO;
699 return 0;
702 static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s,
703 struct iovec *out_cursor,
704 struct iovec *in_cursor, uint8_t class,
705 uint8_t cmd, const struct iovec *data_sg,
706 size_t data_num)
708 const struct virtio_net_ctrl_hdr ctrl = {
709 .class = class,
710 .cmd = cmd,
712 size_t data_size = iov_size(data_sg, data_num), cmd_size;
713 struct iovec out, in;
714 ssize_t r;
715 unsigned dummy_cursor_iov_cnt;
716 VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
718 assert(data_size < vhost_vdpa_net_cvq_cmd_page_len() - sizeof(ctrl));
719 cmd_size = sizeof(ctrl) + data_size;
720 trace_vhost_vdpa_net_load_cmd(s, class, cmd, data_num, data_size);
721 if (vhost_svq_available_slots(svq) < 2 ||
722 iov_size(out_cursor, 1) < cmd_size) {
724 * It is time to flush all pending control commands if SVQ is full
725 * or control commands shadow buffers are full.
727 * We can poll here since we've had BQL from the time
728 * we sent the descriptor.
730 r = vhost_vdpa_net_svq_flush(s, in_cursor->iov_base -
731 (void *)s->status);
732 if (unlikely(r < 0)) {
733 return r;
736 vhost_vdpa_net_load_cursor_reset(s, out_cursor, in_cursor);
739 /* pack the CVQ command header */
740 iov_from_buf(out_cursor, 1, 0, &ctrl, sizeof(ctrl));
741 /* pack the CVQ command command-specific-data */
742 iov_to_buf(data_sg, data_num, 0,
743 out_cursor->iov_base + sizeof(ctrl), data_size);
745 /* extract the required buffer from the cursor for output */
746 iov_copy(&out, 1, out_cursor, 1, 0, cmd_size);
747 /* extract the required buffer from the cursor for input */
748 iov_copy(&in, 1, in_cursor, 1, 0, sizeof(*s->status));
750 r = vhost_vdpa_net_cvq_add(s, &out, 1, &in, 1);
751 if (unlikely(r < 0)) {
752 trace_vhost_vdpa_net_load_cmd_retval(s, class, cmd, r);
753 return r;
756 /* iterate the cursors */
757 dummy_cursor_iov_cnt = 1;
758 iov_discard_front(&out_cursor, &dummy_cursor_iov_cnt, cmd_size);
759 dummy_cursor_iov_cnt = 1;
760 iov_discard_front(&in_cursor, &dummy_cursor_iov_cnt, sizeof(*s->status));
762 return 0;
765 static int vhost_vdpa_net_load_mac(VhostVDPAState *s, const VirtIONet *n,
766 struct iovec *out_cursor,
767 struct iovec *in_cursor)
769 if (virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
770 const struct iovec data = {
771 .iov_base = (void *)n->mac,
772 .iov_len = sizeof(n->mac),
774 ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
775 VIRTIO_NET_CTRL_MAC,
776 VIRTIO_NET_CTRL_MAC_ADDR_SET,
777 &data, 1);
778 if (unlikely(r < 0)) {
779 return r;
784 * According to VirtIO standard, "The device MUST have an
785 * empty MAC filtering table on reset.".
787 * Therefore, there is no need to send this CVQ command if the
788 * driver also sets an empty MAC filter table, which aligns with
789 * the device's defaults.
791 * Note that the device's defaults can mismatch the driver's
792 * configuration only at live migration.
794 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX) ||
795 n->mac_table.in_use == 0) {
796 return 0;
799 uint32_t uni_entries = n->mac_table.first_multi,
800 uni_macs_size = uni_entries * ETH_ALEN,
801 mul_entries = n->mac_table.in_use - uni_entries,
802 mul_macs_size = mul_entries * ETH_ALEN;
803 struct virtio_net_ctrl_mac uni = {
804 .entries = cpu_to_le32(uni_entries),
806 struct virtio_net_ctrl_mac mul = {
807 .entries = cpu_to_le32(mul_entries),
809 const struct iovec data[] = {
811 .iov_base = &uni,
812 .iov_len = sizeof(uni),
813 }, {
814 .iov_base = n->mac_table.macs,
815 .iov_len = uni_macs_size,
816 }, {
817 .iov_base = &mul,
818 .iov_len = sizeof(mul),
819 }, {
820 .iov_base = &n->mac_table.macs[uni_macs_size],
821 .iov_len = mul_macs_size,
824 ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
825 VIRTIO_NET_CTRL_MAC,
826 VIRTIO_NET_CTRL_MAC_TABLE_SET,
827 data, ARRAY_SIZE(data));
828 if (unlikely(r < 0)) {
829 return r;
832 return 0;
835 static int vhost_vdpa_net_load_rss(VhostVDPAState *s, const VirtIONet *n,
836 struct iovec *out_cursor,
837 struct iovec *in_cursor, bool do_rss)
839 struct virtio_net_rss_config cfg = {};
840 ssize_t r;
841 g_autofree uint16_t *table = NULL;
844 * According to VirtIO standard, "Initially the device has all hash
845 * types disabled and reports only VIRTIO_NET_HASH_REPORT_NONE.".
847 * Therefore, there is no need to send this CVQ command if the
848 * driver disables the all hash types, which aligns with
849 * the device's defaults.
851 * Note that the device's defaults can mismatch the driver's
852 * configuration only at live migration.
854 if (!n->rss_data.enabled ||
855 n->rss_data.hash_types == VIRTIO_NET_HASH_REPORT_NONE) {
856 return 0;
859 table = g_malloc_n(n->rss_data.indirections_len,
860 sizeof(n->rss_data.indirections_table[0]));
861 cfg.hash_types = cpu_to_le32(n->rss_data.hash_types);
863 if (do_rss) {
865 * According to VirtIO standard, "Number of entries in indirection_table
866 * is (indirection_table_mask + 1)".
868 cfg.indirection_table_mask = cpu_to_le16(n->rss_data.indirections_len -
870 cfg.unclassified_queue = cpu_to_le16(n->rss_data.default_queue);
871 for (int i = 0; i < n->rss_data.indirections_len; ++i) {
872 table[i] = cpu_to_le16(n->rss_data.indirections_table[i]);
874 cfg.max_tx_vq = cpu_to_le16(n->curr_queue_pairs);
875 } else {
877 * According to VirtIO standard, "Field reserved MUST contain zeroes.
878 * It is defined to make the structure to match the layout of
879 * virtio_net_rss_config structure, defined in 5.1.6.5.7.".
881 * Therefore, we need to zero the fields in
882 * struct virtio_net_rss_config, which corresponds to the
883 * `reserved` field in struct virtio_net_hash_config.
885 * Note that all other fields are zeroed at their definitions,
886 * except for the `indirection_table` field, where the actual data
887 * is stored in the `table` variable to ensure compatibility
888 * with RSS case. Therefore, we need to zero the `table` variable here.
890 table[0] = 0;
894 * Considering that virtio_net_handle_rss() currently does not restore
895 * the hash key length parsed from the CVQ command sent from the guest
896 * into n->rss_data and uses the maximum key length in other code, so
897 * we also employ the maximum key length here.
899 cfg.hash_key_length = sizeof(n->rss_data.key);
901 const struct iovec data[] = {
903 .iov_base = &cfg,
904 .iov_len = offsetof(struct virtio_net_rss_config,
905 indirection_table),
906 }, {
907 .iov_base = table,
908 .iov_len = n->rss_data.indirections_len *
909 sizeof(n->rss_data.indirections_table[0]),
910 }, {
911 .iov_base = &cfg.max_tx_vq,
912 .iov_len = offsetof(struct virtio_net_rss_config, hash_key_data) -
913 offsetof(struct virtio_net_rss_config, max_tx_vq),
914 }, {
915 .iov_base = (void *)n->rss_data.key,
916 .iov_len = sizeof(n->rss_data.key),
920 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
921 VIRTIO_NET_CTRL_MQ,
922 do_rss ? VIRTIO_NET_CTRL_MQ_RSS_CONFIG :
923 VIRTIO_NET_CTRL_MQ_HASH_CONFIG,
924 data, ARRAY_SIZE(data));
925 if (unlikely(r < 0)) {
926 return r;
929 return 0;
932 static int vhost_vdpa_net_load_mq(VhostVDPAState *s,
933 const VirtIONet *n,
934 struct iovec *out_cursor,
935 struct iovec *in_cursor)
937 struct virtio_net_ctrl_mq mq;
938 ssize_t r;
940 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_MQ)) {
941 return 0;
944 trace_vhost_vdpa_net_load_mq(s, n->curr_queue_pairs);
946 mq.virtqueue_pairs = cpu_to_le16(n->curr_queue_pairs);
947 const struct iovec data = {
948 .iov_base = &mq,
949 .iov_len = sizeof(mq),
951 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
952 VIRTIO_NET_CTRL_MQ,
953 VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET,
954 &data, 1);
955 if (unlikely(r < 0)) {
956 return r;
959 if (virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_RSS)) {
960 /* load the receive-side scaling state */
961 r = vhost_vdpa_net_load_rss(s, n, out_cursor, in_cursor, true);
962 if (unlikely(r < 0)) {
963 return r;
965 } else if (virtio_vdev_has_feature(&n->parent_obj,
966 VIRTIO_NET_F_HASH_REPORT)) {
967 /* load the hash calculation state */
968 r = vhost_vdpa_net_load_rss(s, n, out_cursor, in_cursor, false);
969 if (unlikely(r < 0)) {
970 return r;
974 return 0;
977 static int vhost_vdpa_net_load_offloads(VhostVDPAState *s,
978 const VirtIONet *n,
979 struct iovec *out_cursor,
980 struct iovec *in_cursor)
982 uint64_t offloads;
983 ssize_t r;
985 if (!virtio_vdev_has_feature(&n->parent_obj,
986 VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
987 return 0;
990 if (n->curr_guest_offloads == virtio_net_supported_guest_offloads(n)) {
992 * According to VirtIO standard, "Upon feature negotiation
993 * corresponding offload gets enabled to preserve
994 * backward compatibility.".
996 * Therefore, there is no need to send this CVQ command if the
997 * driver also enables all supported offloads, which aligns with
998 * the device's defaults.
1000 * Note that the device's defaults can mismatch the driver's
1001 * configuration only at live migration.
1003 return 0;
1006 offloads = cpu_to_le64(n->curr_guest_offloads);
1007 const struct iovec data = {
1008 .iov_base = &offloads,
1009 .iov_len = sizeof(offloads),
1011 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
1012 VIRTIO_NET_CTRL_GUEST_OFFLOADS,
1013 VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET,
1014 &data, 1);
1015 if (unlikely(r < 0)) {
1016 return r;
1019 return 0;
1022 static int vhost_vdpa_net_load_rx_mode(VhostVDPAState *s,
1023 struct iovec *out_cursor,
1024 struct iovec *in_cursor,
1025 uint8_t cmd,
1026 uint8_t on)
1028 const struct iovec data = {
1029 .iov_base = &on,
1030 .iov_len = sizeof(on),
1032 ssize_t r;
1034 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
1035 VIRTIO_NET_CTRL_RX, cmd, &data, 1);
1036 if (unlikely(r < 0)) {
1037 return r;
1040 return 0;
1043 static int vhost_vdpa_net_load_rx(VhostVDPAState *s,
1044 const VirtIONet *n,
1045 struct iovec *out_cursor,
1046 struct iovec *in_cursor)
1048 ssize_t r;
1050 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX)) {
1051 return 0;
1055 * According to virtio_net_reset(), device turns promiscuous mode
1056 * on by default.
1058 * Additionally, according to VirtIO standard, "Since there are
1059 * no guarantees, it can use a hash filter or silently switch to
1060 * allmulti or promiscuous mode if it is given too many addresses.".
1061 * QEMU marks `n->mac_table.uni_overflow` if guest sets too many
1062 * non-multicast MAC addresses, indicating that promiscuous mode
1063 * should be enabled.
1065 * Therefore, QEMU should only send this CVQ command if the
1066 * `n->mac_table.uni_overflow` is not marked and `n->promisc` is off,
1067 * which sets promiscuous mode on, different from the device's defaults.
1069 * Note that the device's defaults can mismatch the driver's
1070 * configuration only at live migration.
1072 if (!n->mac_table.uni_overflow && !n->promisc) {
1073 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1074 VIRTIO_NET_CTRL_RX_PROMISC, 0);
1075 if (unlikely(r < 0)) {
1076 return r;
1081 * According to virtio_net_reset(), device turns all-multicast mode
1082 * off by default.
1084 * According to VirtIO standard, "Since there are no guarantees,
1085 * it can use a hash filter or silently switch to allmulti or
1086 * promiscuous mode if it is given too many addresses.". QEMU marks
1087 * `n->mac_table.multi_overflow` if guest sets too many
1088 * non-multicast MAC addresses.
1090 * Therefore, QEMU should only send this CVQ command if the
1091 * `n->mac_table.multi_overflow` is marked or `n->allmulti` is on,
1092 * which sets all-multicast mode on, different from the device's defaults.
1094 * Note that the device's defaults can mismatch the driver's
1095 * configuration only at live migration.
1097 if (n->mac_table.multi_overflow || n->allmulti) {
1098 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1099 VIRTIO_NET_CTRL_RX_ALLMULTI, 1);
1100 if (unlikely(r < 0)) {
1101 return r;
1105 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX_EXTRA)) {
1106 return 0;
1110 * According to virtio_net_reset(), device turns all-unicast mode
1111 * off by default.
1113 * Therefore, QEMU should only send this CVQ command if the driver
1114 * sets all-unicast mode on, different from the device's defaults.
1116 * Note that the device's defaults can mismatch the driver's
1117 * configuration only at live migration.
1119 if (n->alluni) {
1120 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1121 VIRTIO_NET_CTRL_RX_ALLUNI, 1);
1122 if (r < 0) {
1123 return r;
1128 * According to virtio_net_reset(), device turns non-multicast mode
1129 * off by default.
1131 * Therefore, QEMU should only send this CVQ command if the driver
1132 * sets non-multicast mode on, different from the device's defaults.
1134 * Note that the device's defaults can mismatch the driver's
1135 * configuration only at live migration.
1137 if (n->nomulti) {
1138 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1139 VIRTIO_NET_CTRL_RX_NOMULTI, 1);
1140 if (r < 0) {
1141 return r;
1146 * According to virtio_net_reset(), device turns non-unicast mode
1147 * off by default.
1149 * Therefore, QEMU should only send this CVQ command if the driver
1150 * sets non-unicast mode on, different from the device's defaults.
1152 * Note that the device's defaults can mismatch the driver's
1153 * configuration only at live migration.
1155 if (n->nouni) {
1156 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1157 VIRTIO_NET_CTRL_RX_NOUNI, 1);
1158 if (r < 0) {
1159 return r;
1164 * According to virtio_net_reset(), device turns non-broadcast mode
1165 * off by default.
1167 * Therefore, QEMU should only send this CVQ command if the driver
1168 * sets non-broadcast mode on, different from the device's defaults.
1170 * Note that the device's defaults can mismatch the driver's
1171 * configuration only at live migration.
1173 if (n->nobcast) {
1174 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1175 VIRTIO_NET_CTRL_RX_NOBCAST, 1);
1176 if (r < 0) {
1177 return r;
1181 return 0;
1184 static int vhost_vdpa_net_load_single_vlan(VhostVDPAState *s,
1185 const VirtIONet *n,
1186 struct iovec *out_cursor,
1187 struct iovec *in_cursor,
1188 uint16_t vid)
1190 const struct iovec data = {
1191 .iov_base = &vid,
1192 .iov_len = sizeof(vid),
1194 ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
1195 VIRTIO_NET_CTRL_VLAN,
1196 VIRTIO_NET_CTRL_VLAN_ADD,
1197 &data, 1);
1198 if (unlikely(r < 0)) {
1199 return r;
1202 return 0;
1205 static int vhost_vdpa_net_load_vlan(VhostVDPAState *s,
1206 const VirtIONet *n,
1207 struct iovec *out_cursor,
1208 struct iovec *in_cursor)
1210 int r;
1212 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_VLAN)) {
1213 return 0;
1216 for (int i = 0; i < MAX_VLAN >> 5; i++) {
1217 for (int j = 0; n->vlans[i] && j <= 0x1f; j++) {
1218 if (n->vlans[i] & (1U << j)) {
1219 r = vhost_vdpa_net_load_single_vlan(s, n, out_cursor,
1220 in_cursor, (i << 5) + j);
1221 if (unlikely(r != 0)) {
1222 return r;
1228 return 0;
1231 static int vhost_vdpa_net_cvq_load(NetClientState *nc)
1233 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
1234 struct vhost_vdpa *v = &s->vhost_vdpa;
1235 const VirtIONet *n;
1236 int r;
1237 struct iovec out_cursor, in_cursor;
1239 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
1241 vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
1243 if (v->shadow_vqs_enabled) {
1244 n = VIRTIO_NET(v->dev->vdev);
1245 vhost_vdpa_net_load_cursor_reset(s, &out_cursor, &in_cursor);
1246 r = vhost_vdpa_net_load_mac(s, n, &out_cursor, &in_cursor);
1247 if (unlikely(r < 0)) {
1248 return r;
1250 r = vhost_vdpa_net_load_mq(s, n, &out_cursor, &in_cursor);
1251 if (unlikely(r)) {
1252 return r;
1254 r = vhost_vdpa_net_load_offloads(s, n, &out_cursor, &in_cursor);
1255 if (unlikely(r)) {
1256 return r;
1258 r = vhost_vdpa_net_load_rx(s, n, &out_cursor, &in_cursor);
1259 if (unlikely(r)) {
1260 return r;
1262 r = vhost_vdpa_net_load_vlan(s, n, &out_cursor, &in_cursor);
1263 if (unlikely(r)) {
1264 return r;
1268 * We need to poll and check all pending device's used buffers.
1270 * We can poll here since we've had BQL from the time
1271 * we sent the descriptor.
1273 r = vhost_vdpa_net_svq_flush(s, in_cursor.iov_base - (void *)s->status);
1274 if (unlikely(r)) {
1275 return r;
1279 for (int i = 0; i < v->dev->vq_index; ++i) {
1280 vhost_vdpa_set_vring_ready(v, i);
1283 return 0;
1286 static NetClientInfo net_vhost_vdpa_cvq_info = {
1287 .type = NET_CLIENT_DRIVER_VHOST_VDPA,
1288 .size = sizeof(VhostVDPAState),
1289 .receive = vhost_vdpa_receive,
1290 .start = vhost_vdpa_net_cvq_start,
1291 .load = vhost_vdpa_net_cvq_load,
1292 .stop = vhost_vdpa_net_cvq_stop,
1293 .cleanup = vhost_vdpa_cleanup,
1294 .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
1295 .has_ufo = vhost_vdpa_has_ufo,
1296 .check_peer_type = vhost_vdpa_check_peer_type,
1297 .set_steering_ebpf = vhost_vdpa_set_steering_ebpf,
1301 * Forward the excessive VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command to
1302 * vdpa device.
1304 * Considering that QEMU cannot send the entire filter table to the
1305 * vdpa device, it should send the VIRTIO_NET_CTRL_RX_PROMISC CVQ
1306 * command to enable promiscuous mode to receive all packets,
1307 * according to VirtIO standard, "Since there are no guarantees,
1308 * it can use a hash filter or silently switch to allmulti or
1309 * promiscuous mode if it is given too many addresses.".
1311 * Since QEMU ignores MAC addresses beyond `MAC_TABLE_ENTRIES` and
1312 * marks `n->mac_table.x_overflow` accordingly, it should have
1313 * the same effect on the device model to receive
1314 * (`MAC_TABLE_ENTRIES` + 1) or more non-multicast MAC addresses.
1315 * The same applies to multicast MAC addresses.
1317 * Therefore, QEMU can provide the device model with a fake
1318 * VIRTIO_NET_CTRL_MAC_TABLE_SET command with (`MAC_TABLE_ENTRIES` + 1)
1319 * non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) multicast
1320 * MAC addresses. This ensures that the device model marks
1321 * `n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`,
1322 * allowing all packets to be received, which aligns with the
1323 * state of the vdpa device.
1325 static int vhost_vdpa_net_excessive_mac_filter_cvq_add(VhostVDPAState *s,
1326 VirtQueueElement *elem,
1327 struct iovec *out,
1328 const struct iovec *in)
1330 struct virtio_net_ctrl_mac mac_data, *mac_ptr;
1331 struct virtio_net_ctrl_hdr *hdr_ptr;
1332 uint32_t cursor;
1333 ssize_t r;
1334 uint8_t on = 1;
1336 /* parse the non-multicast MAC address entries from CVQ command */
1337 cursor = sizeof(*hdr_ptr);
1338 r = iov_to_buf(elem->out_sg, elem->out_num, cursor,
1339 &mac_data, sizeof(mac_data));
1340 if (unlikely(r != sizeof(mac_data))) {
1342 * If the CVQ command is invalid, we should simulate the vdpa device
1343 * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1345 *s->status = VIRTIO_NET_ERR;
1346 return sizeof(*s->status);
1348 cursor += sizeof(mac_data) + le32_to_cpu(mac_data.entries) * ETH_ALEN;
1350 /* parse the multicast MAC address entries from CVQ command */
1351 r = iov_to_buf(elem->out_sg, elem->out_num, cursor,
1352 &mac_data, sizeof(mac_data));
1353 if (r != sizeof(mac_data)) {
1355 * If the CVQ command is invalid, we should simulate the vdpa device
1356 * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1358 *s->status = VIRTIO_NET_ERR;
1359 return sizeof(*s->status);
1361 cursor += sizeof(mac_data) + le32_to_cpu(mac_data.entries) * ETH_ALEN;
1363 /* validate the CVQ command */
1364 if (iov_size(elem->out_sg, elem->out_num) != cursor) {
1366 * If the CVQ command is invalid, we should simulate the vdpa device
1367 * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1369 *s->status = VIRTIO_NET_ERR;
1370 return sizeof(*s->status);
1374 * According to VirtIO standard, "Since there are no guarantees,
1375 * it can use a hash filter or silently switch to allmulti or
1376 * promiscuous mode if it is given too many addresses.".
1378 * Therefore, considering that QEMU is unable to send the entire
1379 * filter table to the vdpa device, it should send the
1380 * VIRTIO_NET_CTRL_RX_PROMISC CVQ command to enable promiscuous mode
1382 hdr_ptr = out->iov_base;
1383 out->iov_len = sizeof(*hdr_ptr) + sizeof(on);
1385 hdr_ptr->class = VIRTIO_NET_CTRL_RX;
1386 hdr_ptr->cmd = VIRTIO_NET_CTRL_RX_PROMISC;
1387 iov_from_buf(out, 1, sizeof(*hdr_ptr), &on, sizeof(on));
1388 r = vhost_vdpa_net_cvq_add(s, out, 1, in, 1);
1389 if (unlikely(r < 0)) {
1390 return r;
1394 * We can poll here since we've had BQL from the time
1395 * we sent the descriptor.
1397 r = vhost_vdpa_net_svq_poll(s, 1);
1398 if (unlikely(r < sizeof(*s->status))) {
1399 return r;
1401 if (*s->status != VIRTIO_NET_OK) {
1402 return sizeof(*s->status);
1406 * QEMU should also send a fake VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ
1407 * command to the device model, including (`MAC_TABLE_ENTRIES` + 1)
1408 * non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1)
1409 * multicast MAC addresses.
1411 * By doing so, the device model can mark `n->mac_table.uni_overflow`
1412 * and `n->mac_table.multi_overflow`, enabling all packets to be
1413 * received, which aligns with the state of the vdpa device.
1415 cursor = 0;
1416 uint32_t fake_uni_entries = MAC_TABLE_ENTRIES + 1,
1417 fake_mul_entries = MAC_TABLE_ENTRIES + 1,
1418 fake_cvq_size = sizeof(struct virtio_net_ctrl_hdr) +
1419 sizeof(mac_data) + fake_uni_entries * ETH_ALEN +
1420 sizeof(mac_data) + fake_mul_entries * ETH_ALEN;
1422 assert(fake_cvq_size < vhost_vdpa_net_cvq_cmd_page_len());
1423 out->iov_len = fake_cvq_size;
1425 /* pack the header for fake CVQ command */
1426 hdr_ptr = out->iov_base + cursor;
1427 hdr_ptr->class = VIRTIO_NET_CTRL_MAC;
1428 hdr_ptr->cmd = VIRTIO_NET_CTRL_MAC_TABLE_SET;
1429 cursor += sizeof(*hdr_ptr);
1432 * Pack the non-multicast MAC addresses part for fake CVQ command.
1434 * According to virtio_net_handle_mac(), QEMU doesn't verify the MAC
1435 * addresses provided in CVQ command. Therefore, only the entries
1436 * field need to be prepared in the CVQ command.
1438 mac_ptr = out->iov_base + cursor;
1439 mac_ptr->entries = cpu_to_le32(fake_uni_entries);
1440 cursor += sizeof(*mac_ptr) + fake_uni_entries * ETH_ALEN;
1443 * Pack the multicast MAC addresses part for fake CVQ command.
1445 * According to virtio_net_handle_mac(), QEMU doesn't verify the MAC
1446 * addresses provided in CVQ command. Therefore, only the entries
1447 * field need to be prepared in the CVQ command.
1449 mac_ptr = out->iov_base + cursor;
1450 mac_ptr->entries = cpu_to_le32(fake_mul_entries);
1453 * Simulating QEMU poll a vdpa device used buffer
1454 * for VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1456 return sizeof(*s->status);
1460 * Validate and copy control virtqueue commands.
1462 * Following QEMU guidelines, we offer a copy of the buffers to the device to
1463 * prevent TOCTOU bugs.
1465 static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,
1466 VirtQueueElement *elem,
1467 void *opaque)
1469 VhostVDPAState *s = opaque;
1470 size_t in_len;
1471 const struct virtio_net_ctrl_hdr *ctrl;
1472 virtio_net_ctrl_ack status = VIRTIO_NET_ERR;
1473 /* Out buffer sent to both the vdpa device and the device model */
1474 struct iovec out = {
1475 .iov_base = s->cvq_cmd_out_buffer,
1477 /* in buffer used for device model */
1478 const struct iovec model_in = {
1479 .iov_base = &status,
1480 .iov_len = sizeof(status),
1482 /* in buffer used for vdpa device */
1483 const struct iovec vdpa_in = {
1484 .iov_base = s->status,
1485 .iov_len = sizeof(*s->status),
1487 ssize_t dev_written = -EINVAL;
1489 out.iov_len = iov_to_buf(elem->out_sg, elem->out_num, 0,
1490 s->cvq_cmd_out_buffer,
1491 vhost_vdpa_net_cvq_cmd_page_len());
1493 ctrl = s->cvq_cmd_out_buffer;
1494 if (ctrl->class == VIRTIO_NET_CTRL_ANNOUNCE) {
1496 * Guest announce capability is emulated by qemu, so don't forward to
1497 * the device.
1499 dev_written = sizeof(status);
1500 *s->status = VIRTIO_NET_OK;
1501 } else if (unlikely(ctrl->class == VIRTIO_NET_CTRL_MAC &&
1502 ctrl->cmd == VIRTIO_NET_CTRL_MAC_TABLE_SET &&
1503 iov_size(elem->out_sg, elem->out_num) > out.iov_len)) {
1505 * Due to the size limitation of the out buffer sent to the vdpa device,
1506 * which is determined by vhost_vdpa_net_cvq_cmd_page_len(), excessive
1507 * MAC addresses set by the driver for the filter table can cause
1508 * truncation of the CVQ command in QEMU. As a result, the vdpa device
1509 * rejects the flawed CVQ command.
1511 * Therefore, QEMU must handle this situation instead of sending
1512 * the CVQ command directly.
1514 dev_written = vhost_vdpa_net_excessive_mac_filter_cvq_add(s, elem,
1515 &out, &vdpa_in);
1516 if (unlikely(dev_written < 0)) {
1517 goto out;
1519 } else {
1520 ssize_t r;
1521 r = vhost_vdpa_net_cvq_add(s, &out, 1, &vdpa_in, 1);
1522 if (unlikely(r < 0)) {
1523 dev_written = r;
1524 goto out;
1528 * We can poll here since we've had BQL from the time
1529 * we sent the descriptor.
1531 dev_written = vhost_vdpa_net_svq_poll(s, 1);
1534 if (unlikely(dev_written < sizeof(status))) {
1535 error_report("Insufficient written data (%zu)", dev_written);
1536 goto out;
1539 if (*s->status != VIRTIO_NET_OK) {
1540 goto out;
1543 status = VIRTIO_NET_ERR;
1544 virtio_net_handle_ctrl_iov(svq->vdev, &model_in, 1, &out, 1);
1545 if (status != VIRTIO_NET_OK) {
1546 error_report("Bad CVQ processing in model");
1549 out:
1550 in_len = iov_from_buf(elem->in_sg, elem->in_num, 0, &status,
1551 sizeof(status));
1552 if (unlikely(in_len < sizeof(status))) {
1553 error_report("Bad device CVQ written length");
1555 vhost_svq_push_elem(svq, elem, MIN(in_len, sizeof(status)));
1557 * `elem` belongs to vhost_vdpa_net_handle_ctrl_avail() only when
1558 * the function successfully forwards the CVQ command, indicated
1559 * by a non-negative value of `dev_written`. Otherwise, it still
1560 * belongs to SVQ.
1561 * This function should only free the `elem` when it owns.
1563 if (dev_written >= 0) {
1564 g_free(elem);
1566 return dev_written < 0 ? dev_written : 0;
1569 static const VhostShadowVirtqueueOps vhost_vdpa_net_svq_ops = {
1570 .avail_handler = vhost_vdpa_net_handle_ctrl_avail,
1574 * Probe if CVQ is isolated
1576 * @device_fd The vdpa device fd
1577 * @features Features offered by the device.
1578 * @cvq_index The control vq pair index
1580 * Returns <0 in case of failure, 0 if false and 1 if true.
1582 static int vhost_vdpa_probe_cvq_isolation(int device_fd, uint64_t features,
1583 int cvq_index, Error **errp)
1585 ERRP_GUARD();
1586 uint64_t backend_features;
1587 int64_t cvq_group;
1588 uint8_t status = VIRTIO_CONFIG_S_ACKNOWLEDGE |
1589 VIRTIO_CONFIG_S_DRIVER;
1590 int r;
1592 r = ioctl(device_fd, VHOST_GET_BACKEND_FEATURES, &backend_features);
1593 if (unlikely(r < 0)) {
1594 error_setg_errno(errp, errno, "Cannot get vdpa backend_features");
1595 return r;
1598 if (!(backend_features & BIT_ULL(VHOST_BACKEND_F_IOTLB_ASID))) {
1599 return 0;
1602 r = ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status);
1603 if (unlikely(r)) {
1604 error_setg_errno(errp, -r, "Cannot set device status");
1605 goto out;
1608 r = ioctl(device_fd, VHOST_SET_FEATURES, &features);
1609 if (unlikely(r)) {
1610 error_setg_errno(errp, -r, "Cannot set features");
1611 goto out;
1614 status |= VIRTIO_CONFIG_S_FEATURES_OK;
1615 r = ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status);
1616 if (unlikely(r)) {
1617 error_setg_errno(errp, -r, "Cannot set device status");
1618 goto out;
1621 cvq_group = vhost_vdpa_get_vring_group(device_fd, cvq_index, errp);
1622 if (unlikely(cvq_group < 0)) {
1623 if (cvq_group != -ENOTSUP) {
1624 r = cvq_group;
1625 goto out;
1629 * The kernel report VHOST_BACKEND_F_IOTLB_ASID if the vdpa frontend
1630 * support ASID even if the parent driver does not. The CVQ cannot be
1631 * isolated in this case.
1633 error_free(*errp);
1634 *errp = NULL;
1635 r = 0;
1636 goto out;
1639 for (int i = 0; i < cvq_index; ++i) {
1640 int64_t group = vhost_vdpa_get_vring_group(device_fd, i, errp);
1641 if (unlikely(group < 0)) {
1642 r = group;
1643 goto out;
1646 if (group == (int64_t)cvq_group) {
1647 r = 0;
1648 goto out;
1652 r = 1;
1654 out:
1655 status = 0;
1656 ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status);
1657 return r;
1660 static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
1661 const char *device,
1662 const char *name,
1663 int vdpa_device_fd,
1664 int queue_pair_index,
1665 int nvqs,
1666 bool is_datapath,
1667 bool svq,
1668 struct vhost_vdpa_iova_range iova_range,
1669 uint64_t features,
1670 VhostVDPAShared *shared,
1671 Error **errp)
1673 NetClientState *nc = NULL;
1674 VhostVDPAState *s;
1675 int ret = 0;
1676 assert(name);
1677 int cvq_isolated = 0;
1679 if (is_datapath) {
1680 nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device,
1681 name);
1682 } else {
1683 cvq_isolated = vhost_vdpa_probe_cvq_isolation(vdpa_device_fd, features,
1684 queue_pair_index * 2,
1685 errp);
1686 if (unlikely(cvq_isolated < 0)) {
1687 return NULL;
1690 nc = qemu_new_net_control_client(&net_vhost_vdpa_cvq_info, peer,
1691 device, name);
1693 qemu_set_info_str(nc, TYPE_VHOST_VDPA);
1694 s = DO_UPCAST(VhostVDPAState, nc, nc);
1696 s->vhost_vdpa.index = queue_pair_index;
1697 s->always_svq = svq;
1698 s->migration_state.notify = NULL;
1699 s->vhost_vdpa.shadow_vqs_enabled = svq;
1700 if (queue_pair_index == 0) {
1701 vhost_vdpa_net_valid_svq_features(features,
1702 &s->vhost_vdpa.migration_blocker);
1703 s->vhost_vdpa.shared = g_new0(VhostVDPAShared, 1);
1704 s->vhost_vdpa.shared->device_fd = vdpa_device_fd;
1705 s->vhost_vdpa.shared->iova_range = iova_range;
1706 s->vhost_vdpa.shared->shadow_data = svq;
1707 } else if (!is_datapath) {
1708 s->cvq_cmd_out_buffer = mmap(NULL, vhost_vdpa_net_cvq_cmd_page_len(),
1709 PROT_READ | PROT_WRITE,
1710 MAP_SHARED | MAP_ANONYMOUS, -1, 0);
1711 s->status = mmap(NULL, vhost_vdpa_net_cvq_cmd_page_len(),
1712 PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS,
1713 -1, 0);
1715 s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops;
1716 s->vhost_vdpa.shadow_vq_ops_opaque = s;
1717 s->cvq_isolated = cvq_isolated;
1719 if (queue_pair_index != 0) {
1720 s->vhost_vdpa.shared = shared;
1723 ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
1724 if (ret) {
1725 qemu_del_net_client(nc);
1726 return NULL;
1729 return nc;
1732 static int vhost_vdpa_get_features(int fd, uint64_t *features, Error **errp)
1734 int ret = ioctl(fd, VHOST_GET_FEATURES, features);
1735 if (unlikely(ret < 0)) {
1736 error_setg_errno(errp, errno,
1737 "Fail to query features from vhost-vDPA device");
1739 return ret;
1742 static int vhost_vdpa_get_max_queue_pairs(int fd, uint64_t features,
1743 int *has_cvq, Error **errp)
1745 unsigned long config_size = offsetof(struct vhost_vdpa_config, buf);
1746 g_autofree struct vhost_vdpa_config *config = NULL;
1747 __virtio16 *max_queue_pairs;
1748 int ret;
1750 if (features & (1 << VIRTIO_NET_F_CTRL_VQ)) {
1751 *has_cvq = 1;
1752 } else {
1753 *has_cvq = 0;
1756 if (features & (1 << VIRTIO_NET_F_MQ)) {
1757 config = g_malloc0(config_size + sizeof(*max_queue_pairs));
1758 config->off = offsetof(struct virtio_net_config, max_virtqueue_pairs);
1759 config->len = sizeof(*max_queue_pairs);
1761 ret = ioctl(fd, VHOST_VDPA_GET_CONFIG, config);
1762 if (ret) {
1763 error_setg(errp, "Fail to get config from vhost-vDPA device");
1764 return -ret;
1767 max_queue_pairs = (__virtio16 *)&config->buf;
1769 return lduw_le_p(max_queue_pairs);
1772 return 1;
1775 int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
1776 NetClientState *peer, Error **errp)
1778 ERRP_GUARD();
1779 const NetdevVhostVDPAOptions *opts;
1780 uint64_t features;
1781 int vdpa_device_fd;
1782 g_autofree NetClientState **ncs = NULL;
1783 struct vhost_vdpa_iova_range iova_range;
1784 NetClientState *nc;
1785 int queue_pairs, r, i = 0, has_cvq = 0;
1787 assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
1788 opts = &netdev->u.vhost_vdpa;
1789 if (!opts->vhostdev && !opts->vhostfd) {
1790 error_setg(errp,
1791 "vhost-vdpa: neither vhostdev= nor vhostfd= was specified");
1792 return -1;
1795 if (opts->vhostdev && opts->vhostfd) {
1796 error_setg(errp,
1797 "vhost-vdpa: vhostdev= and vhostfd= are mutually exclusive");
1798 return -1;
1801 if (opts->vhostdev) {
1802 vdpa_device_fd = qemu_open(opts->vhostdev, O_RDWR, errp);
1803 if (vdpa_device_fd == -1) {
1804 return -errno;
1806 } else {
1807 /* has_vhostfd */
1808 vdpa_device_fd = monitor_fd_param(monitor_cur(), opts->vhostfd, errp);
1809 if (vdpa_device_fd == -1) {
1810 error_prepend(errp, "vhost-vdpa: unable to parse vhostfd: ");
1811 return -1;
1815 r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp);
1816 if (unlikely(r < 0)) {
1817 goto err;
1820 queue_pairs = vhost_vdpa_get_max_queue_pairs(vdpa_device_fd, features,
1821 &has_cvq, errp);
1822 if (queue_pairs < 0) {
1823 qemu_close(vdpa_device_fd);
1824 return queue_pairs;
1827 r = vhost_vdpa_get_iova_range(vdpa_device_fd, &iova_range);
1828 if (unlikely(r < 0)) {
1829 error_setg(errp, "vhost-vdpa: get iova range failed: %s",
1830 strerror(-r));
1831 goto err;
1834 if (opts->x_svq && !vhost_vdpa_net_valid_svq_features(features, errp)) {
1835 goto err;
1838 ncs = g_malloc0(sizeof(*ncs) * queue_pairs);
1840 for (i = 0; i < queue_pairs; i++) {
1841 VhostVDPAShared *shared = NULL;
1843 if (i) {
1844 shared = DO_UPCAST(VhostVDPAState, nc, ncs[0])->vhost_vdpa.shared;
1846 ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
1847 vdpa_device_fd, i, 2, true, opts->x_svq,
1848 iova_range, features, shared, errp);
1849 if (!ncs[i])
1850 goto err;
1853 if (has_cvq) {
1854 VhostVDPAState *s0 = DO_UPCAST(VhostVDPAState, nc, ncs[0]);
1855 VhostVDPAShared *shared = s0->vhost_vdpa.shared;
1857 nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
1858 vdpa_device_fd, i, 1, false,
1859 opts->x_svq, iova_range, features, shared,
1860 errp);
1861 if (!nc)
1862 goto err;
1865 return 0;
1867 err:
1868 if (i) {
1869 for (i--; i >= 0; i--) {
1870 qemu_del_net_client(ncs[i]);
1874 qemu_close(vdpa_device_fd);
1876 return -1;