hw/pflash_cfi01.c

   1 /*
   2  *  CFI parallel flash with Intel command set emulation
   3  *
   4  *  Copyright (c) 2006 Thorsten Zitterell
   5  *  Copyright (c) 2005 Jocelyn Mayer
   6  *
   7  * This library is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU Lesser General Public
   9  * License as published by the Free Software Foundation; either
  10  * version 2 of the License, or (at your option) any later version.
  11  *
  12  * This library is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * Lesser General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU Lesser General Public
  18  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 /*
  22  * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
  23  * Supported commands/modes are:
  24  * - flash read
  25  * - flash write
  26  * - flash ID read
  27  * - sector erase
  28  * - CFI queries
  29  *
  30  * It does not support timings
  31  * It does not support flash interleaving
  32  * It does not implement software data protection as found in many real chips
  33  * It does not implement erase suspend/resume commands
  34  * It does not implement multiple sectors erase
  35  *
  36  * It does not implement much more ...
  37  */
  38
  39 #include "hw.h"
  40 #include "flash.h"
  41 #include "block.h"
  42 #include "qemu-timer.h"
  43
  44 #define PFLASH_BUG(fmt, ...) \
  45 do { \
  46     printf("PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \
  47     exit(1); \
  48 } while(0)
  49
  50 /* #define PFLASH_DEBUG */
  51 #ifdef PFLASH_DEBUG
  52 #define DPRINTF(fmt, ...)                          \
  53 do {                                               \
  54     printf("PFLASH: " fmt , ## __VA_ARGS__);       \
  55 } while (0)
  56 #else
  57 #define DPRINTF(fmt, ...) do { } while (0)
  58 #endif
  59
  60 struct pflash_t {
  61     BlockDriverState *bs;
  62     target_phys_addr_t base;
  63     target_phys_addr_t sector_len;
  64     target_phys_addr_t total_len;
  65     int width;
  66     int wcycle; /* if 0, the flash is read normally */
  67     int bypass;
  68     int ro;
  69     uint8_t cmd;
  70     uint8_t status;
  71     uint16_t ident[4];
  72     uint8_t cfi_len;
  73     uint8_t cfi_table[0x52];
  74     target_phys_addr_t counter;
  75     unsigned int writeblock_size;
  76     QEMUTimer *timer;
  77     ram_addr_t off;
  78     int fl_mem;
  79     void *storage;
  80 };
  81
  82 static void pflash_timer (void *opaque)
  83 {
  84     pflash_t *pfl = opaque;
  85
  86     DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
  87     /* Reset flash */
  88     pfl->status ^= 0x80;
  89     if (pfl->bypass) {
  90         pfl->wcycle = 2;
  91     } else {
  92         cpu_register_physical_memory(pfl->base, pfl->total_len,
  93                         pfl->off | IO_MEM_ROMD | pfl->fl_mem);
  94         pfl->wcycle = 0;
  95     }
  96     pfl->cmd = 0;
  97 }
  98
  99 static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
 100                              int width, int be)
 101 {
 102     target_phys_addr_t boff;
 103     uint32_t ret;
 104     uint8_t *p;
 105
 106     ret = -1;
 107     boff = offset & 0xFF; /* why this here ?? */
 108
 109     if (pfl->width == 2)
 110         boff = boff >> 1;
 111     else if (pfl->width == 4)
 112         boff = boff >> 2;
 113
 114 #if 0
 115     DPRINTF("%s: reading offset " TARGET_FMT_plx " under cmd %02x width %d\n",
 116             __func__, offset, pfl->cmd, width);
 117 #endif
 118     switch (pfl->cmd) {
 119     case 0x00:
 120         /* Flash area read */
 121         p = pfl->storage;
 122         switch (width) {
 123         case 1:
 124             ret = p[offset];
 125             DPRINTF("%s: data offset " TARGET_FMT_plx " %02x\n",
 126                     __func__, offset, ret);
 127             break;
 128         case 2:
 129             if (be) {
 130                 ret = p[offset] << 8;
 131                 ret |= p[offset + 1];
 132             } else {
 133                 ret = p[offset];
 134                 ret |= p[offset + 1] << 8;
 135             }
 136             DPRINTF("%s: data offset " TARGET_FMT_plx " %04x\n",
 137                     __func__, offset, ret);
 138             break;
 139         case 4:
 140             if (be) {
 141                 ret = p[offset] << 24;
 142                 ret |= p[offset + 1] << 16;
 143                 ret |= p[offset + 2] << 8;
 144                 ret |= p[offset + 3];
 145             } else {
 146                 ret = p[offset];
 147                 ret |= p[offset + 1] << 8;
 148                 ret |= p[offset + 1] << 8;
 149                 ret |= p[offset + 2] << 16;
 150                 ret |= p[offset + 3] << 24;
 151             }
 152             DPRINTF("%s: data offset " TARGET_FMT_plx " %08x\n",
 153                     __func__, offset, ret);
 154             break;
 155         default:
 156             DPRINTF("BUG in %s\n", __func__);
 157         }
 158
 159         break;
 160     case 0x20: /* Block erase */
 161     case 0x50: /* Clear status register */
 162     case 0x60: /* Block /un)lock */
 163     case 0x70: /* Status Register */
 164     case 0xe8: /* Write block */
 165         /* Status register read */
 166         ret = pfl->status;
 167         DPRINTF("%s: status %x\n", __func__, ret);
 168         break;
 169     case 0x90:
 170         switch (boff) {
 171         case 0:
 172             ret = pfl->ident[0] << 8 | pfl->ident[1];
 173             DPRINTF("%s: Manufacturer Code %04x\n", __func__, ret);
 174             break;
 175         case 1:
 176             ret = pfl->ident[2] << 8 | pfl->ident[3];
 177             DPRINTF("%s: Device ID Code %04x\n", __func__, ret);
 178             break;
 179         default:
 180             DPRINTF("%s: Read Device Information boff=%x\n", __func__, boff);
 181             ret = 0;
 182             break;
 183         }
 184         break;
 185     case 0x98: /* Query mode */
 186         if (boff > pfl->cfi_len)
 187             ret = 0;
 188         else
 189             ret = pfl->cfi_table[boff];
 190         break;
 191     default:
 192         /* This should never happen : reset state & treat it as a read */
 193         DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
 194         pfl->wcycle = 0;
 195         pfl->cmd = 0;
 196     }
 197     return ret;
 198 }
 199
 200 /* update flash content on disk */
 201 static void pflash_update(pflash_t *pfl, int offset,
 202                           int size)
 203 {
 204     int offset_end;
 205     if (pfl->bs) {
 206         offset_end = offset + size;
 207         /* round to sectors */
 208         offset = offset >> 9;
 209         offset_end = (offset_end + 511) >> 9;
 210         bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
 211                    offset_end - offset);
 212     }
 213 }
 214
 215 static inline void pflash_data_write(pflash_t *pfl, target_phys_addr_t offset,
 216                                      uint32_t value, int width, int be)
 217 {
 218     uint8_t *p = pfl->storage;
 219
 220     DPRINTF("%s: block write offset " TARGET_FMT_plx
 221             " value %x counter " TARGET_FMT_plx "\n",
 222             __func__, offset, value, pfl->counter);
 223     switch (width) {
 224     case 1:
 225         p[offset] = value;
 226         break;
 227     case 2:
 228         if (be) {
 229             p[offset] = value >> 8;
 230             p[offset + 1] = value;
 231         } else {
 232             p[offset] = value;
 233             p[offset + 1] = value >> 8;
 234         }
 235         break;
 236     case 4:
 237         if (be) {
 238             p[offset] = value >> 24;
 239             p[offset + 1] = value >> 16;
 240             p[offset + 2] = value >> 8;
 241             p[offset + 3] = value;
 242         } else {
 243             p[offset] = value;
 244             p[offset + 1] = value >> 8;
 245             p[offset + 2] = value >> 16;
 246             p[offset + 3] = value >> 24;
 247         }
 248         break;
 249     }
 250
 251 }
 252
 253 static void pflash_write(pflash_t *pfl, target_phys_addr_t offset,
 254                          uint32_t value, int width, int be)
 255 {
 256     uint8_t *p;
 257     uint8_t cmd;
 258
 259     cmd = value;
 260
 261     DPRINTF("%s: writing offset " TARGET_FMT_plx " value %08x width %d wcycle 0x%x\n",
 262             __func__, offset, value, width, pfl->wcycle);
 263
 264     if (!pfl->wcycle) {
 265         /* Set the device in I/O access mode */
 266         cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
 267     }
 268
 269     switch (pfl->wcycle) {
 270     case 0:
 271         /* read mode */
 272         switch (cmd) {
 273         case 0x00: /* ??? */
 274             goto reset_flash;
 275         case 0x10: /* Single Byte Program */
 276         case 0x40: /* Single Byte Program */
 277             DPRINTF("%s: Single Byte Program\n", __func__);
 278             break;
 279         case 0x20: /* Block erase */
 280             p = pfl->storage;
 281             offset &= ~(pfl->sector_len - 1);
 282
 283             DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes "
 284                     TARGET_FMT_plx "\n",
 285                     __func__, offset, pfl->sector_len);
 286
 287             memset(p + offset, 0xff, pfl->sector_len);
 288             pflash_update(pfl, offset, pfl->sector_len);
 289             pfl->status |= 0x80; /* Ready! */
 290             break;
 291         case 0x50: /* Clear status bits */
 292             DPRINTF("%s: Clear status bits\n", __func__);
 293             pfl->status = 0x0;
 294             goto reset_flash;
 295         case 0x60: /* Block (un)lock */
 296             DPRINTF("%s: Block unlock\n", __func__);
 297             break;
 298         case 0x70: /* Status Register */
 299             DPRINTF("%s: Read status register\n", __func__);
 300             pfl->cmd = cmd;
 301             return;
 302         case 0x90: /* Read Device ID */
 303             DPRINTF("%s: Read Device information\n", __func__);
 304             pfl->cmd = cmd;
 305             return;
 306         case 0x98: /* CFI query */
 307             DPRINTF("%s: CFI query\n", __func__);
 308             break;
 309         case 0xe8: /* Write to buffer */
 310             DPRINTF("%s: Write to buffer\n", __func__);
 311             pfl->status |= 0x80; /* Ready! */
 312             break;
 313         case 0xff: /* Read array mode */
 314             DPRINTF("%s: Read array mode\n", __func__);
 315             goto reset_flash;
 316         default:
 317             goto error_flash;
 318         }
 319         pfl->wcycle++;
 320         pfl->cmd = cmd;
 321         return;
 322     case 1:
 323         switch (pfl->cmd) {
 324         case 0x10: /* Single Byte Program */
 325         case 0x40: /* Single Byte Program */
 326             DPRINTF("%s: Single Byte Program\n", __func__);
 327             pflash_data_write(pfl, offset, value, width, be);
 328             pflash_update(pfl, offset, width);
 329             pfl->status |= 0x80; /* Ready! */
 330             pfl->wcycle = 0;
 331         break;
 332         case 0x20: /* Block erase */
 333         case 0x28:
 334             if (cmd == 0xd0) { /* confirm */
 335                 pfl->wcycle = 0;
 336                 pfl->status |= 0x80;
 337             } else if (cmd == 0xff) { /* read array mode */
 338                 goto reset_flash;
 339             } else
 340                 goto error_flash;
 341
 342             break;
 343         case 0xe8:
 344             DPRINTF("%s: block write of %x bytes\n", __func__, value);
 345             pfl->counter = value;
 346             pfl->wcycle++;
 347             break;
 348         case 0x60:
 349             if (cmd == 0xd0) {
 350                 pfl->wcycle = 0;
 351                 pfl->status |= 0x80;
 352             } else if (cmd == 0x01) {
 353                 pfl->wcycle = 0;
 354                 pfl->status |= 0x80;
 355             } else if (cmd == 0xff) {
 356                 goto reset_flash;
 357             } else {
 358                 DPRINTF("%s: Unknown (un)locking command\n", __func__);
 359                 goto reset_flash;
 360             }
 361             break;
 362         case 0x98:
 363             if (cmd == 0xff) {
 364                 goto reset_flash;
 365             } else {
 366                 DPRINTF("%s: leaving query mode\n", __func__);
 367             }
 368             break;
 369         default:
 370             goto error_flash;
 371         }
 372         return;
 373     case 2:
 374         switch (pfl->cmd) {
 375         case 0xe8: /* Block write */
 376             pflash_data_write(pfl, offset, value, width, be);
 377
 378             pfl->status |= 0x80;
 379
 380             if (!pfl->counter) {
 381                 target_phys_addr_t mask = pfl->writeblock_size - 1;
 382                 mask = ~mask;
 383
 384                 DPRINTF("%s: block write finished\n", __func__);
 385                 pfl->wcycle++;
 386                 /* Flush the entire write buffer onto backing storage.  */
 387                 pflash_update(pfl, offset & mask, pfl->writeblock_size);
 388             }
 389
 390             pfl->counter--;
 391             break;
 392         default:
 393             goto error_flash;
 394         }
 395         return;
 396     case 3: /* Confirm mode */
 397         switch (pfl->cmd) {
 398         case 0xe8: /* Block write */
 399             if (cmd == 0xd0) {
 400                 pfl->wcycle = 0;
 401                 pfl->status |= 0x80;
 402             } else {
 403                 DPRINTF("%s: unknown command for \"write block\"\n", __func__);
 404                 PFLASH_BUG("Write block confirm");
 405                 goto reset_flash;
 406             }
 407             break;
 408         default:
 409             goto error_flash;
 410         }
 411         return;
 412     default:
 413         /* Should never happen */
 414         DPRINTF("%s: invalid write state\n",  __func__);
 415         goto reset_flash;
 416     }
 417     return;
 418
 419  error_flash:
 420     printf("%s: Unimplemented flash cmd sequence "
 421            "(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)\n",
 422            __func__, offset, pfl->wcycle, pfl->cmd, value);
 423
 424  reset_flash:
 425     cpu_register_physical_memory(pfl->base, pfl->total_len,
 426                     pfl->off | IO_MEM_ROMD | pfl->fl_mem);
 427
 428     pfl->bypass = 0;
 429     pfl->wcycle = 0;
 430     pfl->cmd = 0;
 431     return;
 432 }
 433
 434
 435 static uint32_t pflash_readb_be(void *opaque, target_phys_addr_t addr)
 436 {
 437     return pflash_read(opaque, addr, 1, 1);
 438 }
 439
 440 static uint32_t pflash_readb_le(void *opaque, target_phys_addr_t addr)
 441 {
 442     return pflash_read(opaque, addr, 1, 0);
 443 }
 444
 445 static uint32_t pflash_readw_be(void *opaque, target_phys_addr_t addr)
 446 {
 447     pflash_t *pfl = opaque;
 448
 449     return pflash_read(pfl, addr, 2, 1);
 450 }
 451
 452 static uint32_t pflash_readw_le(void *opaque, target_phys_addr_t addr)
 453 {
 454     pflash_t *pfl = opaque;
 455
 456     return pflash_read(pfl, addr, 2, 0);
 457 }
 458
 459 static uint32_t pflash_readl_be(void *opaque, target_phys_addr_t addr)
 460 {
 461     pflash_t *pfl = opaque;
 462
 463     return pflash_read(pfl, addr, 4, 1);
 464 }
 465
 466 static uint32_t pflash_readl_le(void *opaque, target_phys_addr_t addr)
 467 {
 468     pflash_t *pfl = opaque;
 469
 470     return pflash_read(pfl, addr, 4, 0);
 471 }
 472
 473 static void pflash_writeb_be(void *opaque, target_phys_addr_t addr,
 474                              uint32_t value)
 475 {
 476     pflash_write(opaque, addr, value, 1, 1);
 477 }
 478
 479 static void pflash_writeb_le(void *opaque, target_phys_addr_t addr,
 480                              uint32_t value)
 481 {
 482     pflash_write(opaque, addr, value, 1, 0);
 483 }
 484
 485 static void pflash_writew_be(void *opaque, target_phys_addr_t addr,
 486                              uint32_t value)
 487 {
 488     pflash_t *pfl = opaque;
 489
 490     pflash_write(pfl, addr, value, 2, 1);
 491 }
 492
 493 static void pflash_writew_le(void *opaque, target_phys_addr_t addr,
 494                              uint32_t value)
 495 {
 496     pflash_t *pfl = opaque;
 497
 498     pflash_write(pfl, addr, value, 2, 0);
 499 }
 500
 501 static void pflash_writel_be(void *opaque, target_phys_addr_t addr,
 502                              uint32_t value)
 503 {
 504     pflash_t *pfl = opaque;
 505
 506     pflash_write(pfl, addr, value, 4, 1);
 507 }
 508
 509 static void pflash_writel_le(void *opaque, target_phys_addr_t addr,
 510                              uint32_t value)
 511 {
 512     pflash_t *pfl = opaque;
 513
 514     pflash_write(pfl, addr, value, 4, 0);
 515 }
 516
 517 static CPUWriteMemoryFunc * const pflash_write_ops_be[] = {
 518     &pflash_writeb_be,
 519     &pflash_writew_be,
 520     &pflash_writel_be,
 521 };
 522
 523 static CPUReadMemoryFunc * const pflash_read_ops_be[] = {
 524     &pflash_readb_be,
 525     &pflash_readw_be,
 526     &pflash_readl_be,
 527 };
 528
 529 static CPUWriteMemoryFunc * const pflash_write_ops_le[] = {
 530     &pflash_writeb_le,
 531     &pflash_writew_le,
 532     &pflash_writel_le,
 533 };
 534
 535 static CPUReadMemoryFunc * const pflash_read_ops_le[] = {
 536     &pflash_readb_le,
 537     &pflash_readw_le,
 538     &pflash_readl_le,
 539 };
 540
 541 /* Count trailing zeroes of a 32 bits quantity */
 542 static int ctz32 (uint32_t n)
 543 {
 544     int ret;
 545
 546     ret = 0;
 547     if (!(n & 0xFFFF)) {
 548         ret += 16;
 549         n = n >> 16;
 550     }
 551     if (!(n & 0xFF)) {
 552         ret += 8;
 553         n = n >> 8;
 554     }
 555     if (!(n & 0xF)) {
 556         ret += 4;
 557         n = n >> 4;
 558     }
 559     if (!(n & 0x3)) {
 560         ret += 2;
 561         n = n >> 2;
 562     }
 563     if (!(n & 0x1)) {
 564         ret++;
 565 #if 0 /* This is not necessary as n is never 0 */
 566         n = n >> 1;
 567 #endif
 568     }
 569 #if 0 /* This is not necessary as n is never 0 */
 570     if (!n)
 571         ret++;
 572 #endif
 573
 574     return ret;
 575 }
 576
 577 pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
 578                                 BlockDriverState *bs, uint32_t sector_len,
 579                                 int nb_blocs, int width,
 580                                 uint16_t id0, uint16_t id1,
 581                                 uint16_t id2, uint16_t id3,
 582                                 int be)
 583 {
 584     pflash_t *pfl;
 585     target_phys_addr_t total_len;
 586     int ret;
 587
 588     total_len = sector_len * nb_blocs;
 589
 590     /* XXX: to be fixed */
 591 #if 0
 592     if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
 593         total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
 594         return NULL;
 595 #endif
 596
 597     pfl = qemu_mallocz(sizeof(pflash_t));
 598
 599     /* FIXME: Allocate ram ourselves.  */
 600     pfl->storage = qemu_get_ram_ptr(off);
 601     if (be) {
 602         pfl->fl_mem = cpu_register_io_memory(pflash_read_ops_be,
 603                                              pflash_write_ops_be, pfl);
 604     } else {
 605         pfl->fl_mem = cpu_register_io_memory(pflash_read_ops_le,
 606                                              pflash_write_ops_le, pfl);
 607     }
 608     pfl->off = off;
 609     cpu_register_physical_memory(base, total_len,
 610                     off | pfl->fl_mem | IO_MEM_ROMD);
 611
 612     pfl->bs = bs;
 613     if (pfl->bs) {
 614         /* read the initial flash content */
 615         ret = bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
 616         if (ret < 0) {
 617             cpu_unregister_io_memory(pfl->fl_mem);
 618             qemu_free(pfl);
 619             return NULL;
 620         }
 621     }
 622 #if 0 /* XXX: there should be a bit to set up read-only,
 623        *      the same way the hardware does (with WP pin).
 624        */
 625     pfl->ro = 1;
 626 #else
 627     pfl->ro = 0;
 628 #endif
 629     pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
 630     pfl->base = base;
 631     pfl->sector_len = sector_len;
 632     pfl->total_len = total_len;
 633     pfl->width = width;
 634     pfl->wcycle = 0;
 635     pfl->cmd = 0;
 636     pfl->status = 0;
 637     pfl->ident[0] = id0;
 638     pfl->ident[1] = id1;
 639     pfl->ident[2] = id2;
 640     pfl->ident[3] = id3;
 641     /* Hardcoded CFI table */
 642     pfl->cfi_len = 0x52;
 643     /* Standard "QRY" string */
 644     pfl->cfi_table[0x10] = 'Q';
 645     pfl->cfi_table[0x11] = 'R';
 646     pfl->cfi_table[0x12] = 'Y';
 647     /* Command set (Intel) */
 648     pfl->cfi_table[0x13] = 0x01;
 649     pfl->cfi_table[0x14] = 0x00;
 650     /* Primary extended table address (none) */
 651     pfl->cfi_table[0x15] = 0x31;
 652     pfl->cfi_table[0x16] = 0x00;
 653     /* Alternate command set (none) */
 654     pfl->cfi_table[0x17] = 0x00;
 655     pfl->cfi_table[0x18] = 0x00;
 656     /* Alternate extended table (none) */
 657     pfl->cfi_table[0x19] = 0x00;
 658     pfl->cfi_table[0x1A] = 0x00;
 659     /* Vcc min */
 660     pfl->cfi_table[0x1B] = 0x45;
 661     /* Vcc max */
 662     pfl->cfi_table[0x1C] = 0x55;
 663     /* Vpp min (no Vpp pin) */
 664     pfl->cfi_table[0x1D] = 0x00;
 665     /* Vpp max (no Vpp pin) */
 666     pfl->cfi_table[0x1E] = 0x00;
 667     /* Reserved */
 668     pfl->cfi_table[0x1F] = 0x07;
 669     /* Timeout for min size buffer write */
 670     pfl->cfi_table[0x20] = 0x07;
 671     /* Typical timeout for block erase */
 672     pfl->cfi_table[0x21] = 0x0a;
 673     /* Typical timeout for full chip erase (4096 ms) */
 674     pfl->cfi_table[0x22] = 0x00;
 675     /* Reserved */
 676     pfl->cfi_table[0x23] = 0x04;
 677     /* Max timeout for buffer write */
 678     pfl->cfi_table[0x24] = 0x04;
 679     /* Max timeout for block erase */
 680     pfl->cfi_table[0x25] = 0x04;
 681     /* Max timeout for chip erase */
 682     pfl->cfi_table[0x26] = 0x00;
 683     /* Device size */
 684     pfl->cfi_table[0x27] = ctz32(total_len); // + 1;
 685     /* Flash device interface (8 & 16 bits) */
 686     pfl->cfi_table[0x28] = 0x02;
 687     pfl->cfi_table[0x29] = 0x00;
 688     /* Max number of bytes in multi-bytes write */
 689     if (width == 1) {
 690         pfl->cfi_table[0x2A] = 0x08;
 691     } else {
 692         pfl->cfi_table[0x2A] = 0x0B;
 693     }
 694     pfl->writeblock_size = 1 << pfl->cfi_table[0x2A];
 695
 696     pfl->cfi_table[0x2B] = 0x00;
 697     /* Number of erase block regions (uniform) */
 698     pfl->cfi_table[0x2C] = 0x01;
 699     /* Erase block region 1 */
 700     pfl->cfi_table[0x2D] = nb_blocs - 1;
 701     pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
 702     pfl->cfi_table[0x2F] = sector_len >> 8;
 703     pfl->cfi_table[0x30] = sector_len >> 16;
 704
 705     /* Extended */
 706     pfl->cfi_table[0x31] = 'P';
 707     pfl->cfi_table[0x32] = 'R';
 708     pfl->cfi_table[0x33] = 'I';
 709
 710     pfl->cfi_table[0x34] = '1';
 711     pfl->cfi_table[0x35] = '1';
 712
 713     pfl->cfi_table[0x36] = 0x00;
 714     pfl->cfi_table[0x37] = 0x00;
 715     pfl->cfi_table[0x38] = 0x00;
 716     pfl->cfi_table[0x39] = 0x00;
 717
 718     pfl->cfi_table[0x3a] = 0x00;
 719
 720     pfl->cfi_table[0x3b] = 0x00;
 721     pfl->cfi_table[0x3c] = 0x00;
 722
 723     return pfl;
 724 }