include/hw/usb/ehci-regs.h

   1 #ifndef HW_USB_EHCI_REGS_H
   2 #define HW_USB_EHCI_REGS_H
   3
   4 /* Capability Registers Base Address - section 2.2 */
   5 #define CAPLENGTH        0x0000  /* 1-byte, 0x0001 reserved */
   6 #define HCIVERSION       0x0002  /* 2-bytes, i/f version # */
   7 #define HCSPARAMS        0x0004  /* 4-bytes, structural params */
   8 #define HCCPARAMS        0x0008  /* 4-bytes, capability params */
   9 #define EECP             HCCPARAMS + 1
  10 #define HCSPPORTROUTE1   0x000c
  11 #define HCSPPORTROUTE2   0x0010
  12
  13 #define USBCMD           0x0000
  14 #define USBCMD_RUNSTOP   (1 << 0)      // run / Stop
  15 #define USBCMD_HCRESET   (1 << 1)      // HC Reset
  16 #define USBCMD_FLS       (3 << 2)      // Frame List Size
  17 #define USBCMD_FLS_SH    2             // Frame List Size Shift
  18 #define USBCMD_PSE       (1 << 4)      // Periodic Schedule Enable
  19 #define USBCMD_ASE       (1 << 5)      // Asynch Schedule Enable
  20 #define USBCMD_IAAD      (1 << 6)      // Int Asynch Advance Doorbell
  21 #define USBCMD_LHCR      (1 << 7)      // Light Host Controller Reset
  22 #define USBCMD_ASPMC     (3 << 8)      // Async Sched Park Mode Count
  23 #define USBCMD_ASPME     (1 << 11)     // Async Sched Park Mode Enable
  24 #define USBCMD_ITC       (0x7f << 16)  // Int Threshold Control
  25 #define USBCMD_ITC_SH    16            // Int Threshold Control Shift
  26
  27 #define USBSTS           0x0004
  28 #define USBSTS_RO_MASK   0x0000003f
  29 #define USBSTS_INT       (1 << 0)      // USB Interrupt
  30 #define USBSTS_ERRINT    (1 << 1)      // Error Interrupt
  31 #define USBSTS_PCD       (1 << 2)      // Port Change Detect
  32 #define USBSTS_FLR       (1 << 3)      // Frame List Rollover
  33 #define USBSTS_HSE       (1 << 4)      // Host System Error
  34 #define USBSTS_IAA       (1 << 5)      // Interrupt on Async Advance
  35 #define USBSTS_HALT      (1 << 12)     // HC Halted
  36 #define USBSTS_REC       (1 << 13)     // Reclamation
  37 #define USBSTS_PSS       (1 << 14)     // Periodic Schedule Status
  38 #define USBSTS_ASS       (1 << 15)     // Asynchronous Schedule Status
  39
  40 /*
  41  *  Interrupt enable bits correspond to the interrupt active bits in USBSTS
  42  *  so no need to redefine here.
  43  */
  44 #define USBINTR              0x0008
  45 #define USBINTR_MASK         0x0000003f
  46
  47 #define FRINDEX              0x000c
  48 #define CTRLDSSEGMENT        0x0010
  49 #define PERIODICLISTBASE     0x0014
  50 #define ASYNCLISTADDR        0x0018
  51 #define ASYNCLISTADDR_MASK   0xffffffe0
  52
  53 #define CONFIGFLAG           0x0040
  54
  55 /*
  56  * Bits that are reserved or are read-only are masked out of values
  57  * written to us by software
  58  */
  59 #define PORTSC_RO_MASK       0x007001c0
  60 #define PORTSC_RWC_MASK      0x0000002a
  61 #define PORTSC_WKOC_E        (1 << 22)    // Wake on Over Current Enable
  62 #define PORTSC_WKDS_E        (1 << 21)    // Wake on Disconnect Enable
  63 #define PORTSC_WKCN_E        (1 << 20)    // Wake on Connect Enable
  64 #define PORTSC_PTC           (15 << 16)   // Port Test Control
  65 #define PORTSC_PTC_SH        16           // Port Test Control shift
  66 #define PORTSC_PIC           (3 << 14)    // Port Indicator Control
  67 #define PORTSC_PIC_SH        14           // Port Indicator Control Shift
  68 #define PORTSC_POWNER        (1 << 13)    // Port Owner
  69 #define PORTSC_PPOWER        (1 << 12)    // Port Power
  70 #define PORTSC_LINESTAT      (3 << 10)    // Port Line Status
  71 #define PORTSC_LINESTAT_SH   10           // Port Line Status Shift
  72 #define PORTSC_PRESET        (1 << 8)     // Port Reset
  73 #define PORTSC_SUSPEND       (1 << 7)     // Port Suspend
  74 #define PORTSC_FPRES         (1 << 6)     // Force Port Resume
  75 #define PORTSC_OCC           (1 << 5)     // Over Current Change
  76 #define PORTSC_OCA           (1 << 4)     // Over Current Active
  77 #define PORTSC_PEDC          (1 << 3)     // Port Enable/Disable Change
  78 #define PORTSC_PED           (1 << 2)     // Port Enable/Disable
  79 #define PORTSC_CSC           (1 << 1)     // Connect Status Change
  80 #define PORTSC_CONNECT       (1 << 0)     // Current Connect Status
  81
  82 #endif /* HW_USB_EHCI_REGS_H */