hw/misc/pca9552.c

   1 /*
   2  * PCA9552 I2C LED blinker
   3  *
   4  *     https://www.nxp.com/docs/en/application-note/AN264.pdf
   5  *
   6  * Copyright (c) 2017-2018, IBM Corporation.
   7  * Copyright (c) 2020 Philippe Mathieu-Daudé
   8  *
   9  * This work is licensed under the terms of the GNU GPL, version 2 or
  10  * later. See the COPYING file in the top-level directory.
  11  */
  12
  13 #include "qemu/osdep.h"
  14 #include "qemu/log.h"
  15 #include "qemu/module.h"
  16 #include "qemu/bitops.h"
  17 #include "hw/qdev-properties.h"
  18 #include "hw/misc/pca9552.h"
  19 #include "hw/misc/pca9552_regs.h"
  20 #include "hw/irq.h"
  21 #include "migration/vmstate.h"
  22 #include "qapi/error.h"
  23 #include "qapi/visitor.h"
  24 #include "trace.h"
  25 #include "qom/object.h"
  26
  27 struct PCA955xClass {
  28     /*< private >*/
  29     I2CSlaveClass parent_class;
  30     /*< public >*/
  31
  32     uint8_t pin_count;
  33     uint8_t max_reg;
  34 };
  35 typedef struct PCA955xClass PCA955xClass;
  36
  37 DECLARE_CLASS_CHECKERS(PCA955xClass, PCA955X,
  38                        TYPE_PCA955X)
  39
  40 #define PCA9552_LED_ON   0x0
  41 #define PCA9552_LED_OFF  0x1
  42 #define PCA9552_LED_PWM0 0x2
  43 #define PCA9552_LED_PWM1 0x3
  44
  45 static const char *led_state[] = {"on", "off", "pwm0", "pwm1"};
  46
  47 static uint8_t pca955x_pin_get_config(PCA955xState *s, int pin)
  48 {
  49     uint8_t reg   = PCA9552_LS0 + (pin / 4);
  50     uint8_t shift = (pin % 4) << 1;
  51
  52     return extract32(s->regs[reg], shift, 2);
  53 }
  54
  55 /* Return INPUT status (bit #N belongs to GPIO #N) */
  56 static uint16_t pca955x_pins_get_status(PCA955xState *s)
  57 {
  58     return (s->regs[PCA9552_INPUT1] << 8) | s->regs[PCA9552_INPUT0];
  59 }
  60
  61 static void pca955x_display_pins_status(PCA955xState *s,
  62                                         uint16_t previous_pins_status)
  63 {
  64     PCA955xClass *k = PCA955X_GET_CLASS(s);
  65     uint16_t pins_status, pins_changed;
  66     int i;
  67
  68     pins_status = pca955x_pins_get_status(s);
  69     pins_changed = previous_pins_status ^ pins_status;
  70     if (!pins_changed) {
  71         return;
  72     }
  73     if (trace_event_get_state_backends(TRACE_PCA955X_GPIO_STATUS)) {
  74         char *buf = g_newa(char, k->pin_count + 1);
  75
  76         for (i = 0; i < k->pin_count; i++) {
  77             if (extract32(pins_status, i, 1)) {
  78                 buf[i] = '*';
  79             } else {
  80                 buf[i] = '.';
  81             }
  82         }
  83         buf[i] = '\0';
  84         trace_pca955x_gpio_status(s->description, buf);
  85     }
  86     if (trace_event_get_state_backends(TRACE_PCA955X_GPIO_CHANGE)) {
  87         for (i = 0; i < k->pin_count; i++) {
  88             if (extract32(pins_changed, i, 1)) {
  89                 unsigned new_state = extract32(pins_status, i, 1);
  90
  91                 /*
  92                  * We display the state using the PCA logic ("active-high").
  93                  * This is not the state of the LED, which signal might be
  94                  * wired "active-low" on the board.
  95                  */
  96                 trace_pca955x_gpio_change(s->description, i,
  97                                           !new_state, new_state);
  98             }
  99         }
 100     }
 101 }
 102
 103 static void pca955x_update_pin_input(PCA955xState *s)
 104 {
 105     PCA955xClass *k = PCA955X_GET_CLASS(s);
 106     int i;
 107
 108     for (i = 0; i < k->pin_count; i++) {
 109         uint8_t input_reg = PCA9552_INPUT0 + (i / 8);
 110         uint8_t input_shift = (i % 8);
 111         uint8_t config = pca955x_pin_get_config(s, i);
 112
 113         switch (config) {
 114         case PCA9552_LED_ON:
 115             qemu_set_irq(s->gpio[i], 1);
 116             s->regs[input_reg] |= 1 << input_shift;
 117             break;
 118         case PCA9552_LED_OFF:
 119             qemu_set_irq(s->gpio[i], 0);
 120             s->regs[input_reg] &= ~(1 << input_shift);
 121             break;
 122         case PCA9552_LED_PWM0:
 123         case PCA9552_LED_PWM1:
 124             /* TODO */
 125         default:
 126             break;
 127         }
 128     }
 129 }
 130
 131 static uint8_t pca955x_read(PCA955xState *s, uint8_t reg)
 132 {
 133     switch (reg) {
 134     case PCA9552_INPUT0:
 135     case PCA9552_INPUT1:
 136     case PCA9552_PSC0:
 137     case PCA9552_PWM0:
 138     case PCA9552_PSC1:
 139     case PCA9552_PWM1:
 140     case PCA9552_LS0:
 141     case PCA9552_LS1:
 142     case PCA9552_LS2:
 143     case PCA9552_LS3:
 144         return s->regs[reg];
 145     default:
 146         qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n",
 147                       __func__, reg);
 148         return 0xFF;
 149     }
 150 }
 151
 152 static void pca955x_write(PCA955xState *s, uint8_t reg, uint8_t data)
 153 {
 154     uint16_t pins_status;
 155
 156     switch (reg) {
 157     case PCA9552_PSC0:
 158     case PCA9552_PWM0:
 159     case PCA9552_PSC1:
 160     case PCA9552_PWM1:
 161         s->regs[reg] = data;
 162         break;
 163
 164     case PCA9552_LS0:
 165     case PCA9552_LS1:
 166     case PCA9552_LS2:
 167     case PCA9552_LS3:
 168         pins_status = pca955x_pins_get_status(s);
 169         s->regs[reg] = data;
 170         pca955x_update_pin_input(s);
 171         pca955x_display_pins_status(s, pins_status);
 172         break;
 173
 174     case PCA9552_INPUT0:
 175     case PCA9552_INPUT1:
 176     default:
 177         qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n",
 178                       __func__, reg);
 179     }
 180 }
 181
 182 /*
 183  * When Auto-Increment is on, the register address is incremented
 184  * after each byte is sent to or received by the device. The index
 185  * rollovers to 0 when the maximum register address is reached.
 186  */
 187 static void pca955x_autoinc(PCA955xState *s)
 188 {
 189     PCA955xClass *k = PCA955X_GET_CLASS(s);
 190
 191     if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) {
 192         uint8_t reg = s->pointer & 0xf;
 193
 194         reg = (reg + 1) % (k->max_reg + 1);
 195         s->pointer = reg | PCA9552_AUTOINC;
 196     }
 197 }
 198
 199 static uint8_t pca955x_recv(I2CSlave *i2c)
 200 {
 201     PCA955xState *s = PCA955X(i2c);
 202     uint8_t ret;
 203
 204     ret = pca955x_read(s, s->pointer & 0xf);
 205
 206     /*
 207      * From the Specs:
 208      *
 209      *     Important Note: When a Read sequence is initiated and the
 210      *     AI bit is set to Logic Level 1, the Read Sequence MUST
 211      *     start by a register different from 0.
 212      *
 213      * I don't know what should be done in this case, so throw an
 214      * error.
 215      */
 216     if (s->pointer == PCA9552_AUTOINC) {
 217         qemu_log_mask(LOG_GUEST_ERROR,
 218                       "%s: Autoincrement read starting with register 0\n",
 219                       __func__);
 220     }
 221
 222     pca955x_autoinc(s);
 223
 224     return ret;
 225 }
 226
 227 static int pca955x_send(I2CSlave *i2c, uint8_t data)
 228 {
 229     PCA955xState *s = PCA955X(i2c);
 230
 231     /* First byte sent by is the register address */
 232     if (s->len == 0) {
 233         s->pointer = data;
 234         s->len++;
 235     } else {
 236         pca955x_write(s, s->pointer & 0xf, data);
 237
 238         pca955x_autoinc(s);
 239     }
 240
 241     return 0;
 242 }
 243
 244 static int pca955x_event(I2CSlave *i2c, enum i2c_event event)
 245 {
 246     PCA955xState *s = PCA955X(i2c);
 247
 248     s->len = 0;
 249     return 0;
 250 }
 251
 252 static void pca955x_get_led(Object *obj, Visitor *v, const char *name,
 253                             void *opaque, Error **errp)
 254 {
 255     PCA955xClass *k = PCA955X_GET_CLASS(obj);
 256     PCA955xState *s = PCA955X(obj);
 257     int led, rc, reg;
 258     uint8_t state;
 259
 260     rc = sscanf(name, "led%2d", &led);
 261     if (rc != 1) {
 262         error_setg(errp, "%s: error reading %s", __func__, name);
 263         return;
 264     }
 265     if (led < 0 || led > k->pin_count) {
 266         error_setg(errp, "%s invalid led %s", __func__, name);
 267         return;
 268     }
 269     /*
 270      * Get the LSx register as the qom interface should expose the device
 271      * state, not the modeled 'input line' behaviour which would come from
 272      * reading the INPUTx reg
 273      */
 274     reg = PCA9552_LS0 + led / 4;
 275     state = (pca955x_read(s, reg) >> (led % 8)) & 0x3;
 276     visit_type_str(v, name, (char **)&led_state[state], errp);
 277 }
 278
 279 /*
 280  * Return an LED selector register value based on an existing one, with
 281  * the appropriate 2-bit state value set for the given LED number (0-3).
 282  */
 283 static inline uint8_t pca955x_ledsel(uint8_t oldval, int led_num, int state)
 284 {
 285         return (oldval & (~(0x3 << (led_num << 1)))) |
 286                 ((state & 0x3) << (led_num << 1));
 287 }
 288
 289 static void pca955x_set_led(Object *obj, Visitor *v, const char *name,
 290                             void *opaque, Error **errp)
 291 {
 292     PCA955xClass *k = PCA955X_GET_CLASS(obj);
 293     PCA955xState *s = PCA955X(obj);
 294     int led, rc, reg, val;
 295     uint8_t state;
 296     char *state_str;
 297
 298     if (!visit_type_str(v, name, &state_str, errp)) {
 299         return;
 300     }
 301     rc = sscanf(name, "led%2d", &led);
 302     if (rc != 1) {
 303         error_setg(errp, "%s: error reading %s", __func__, name);
 304         return;
 305     }
 306     if (led < 0 || led > k->pin_count) {
 307         error_setg(errp, "%s invalid led %s", __func__, name);
 308         return;
 309     }
 310
 311     for (state = 0; state < ARRAY_SIZE(led_state); state++) {
 312         if (!strcmp(state_str, led_state[state])) {
 313             break;
 314         }
 315     }
 316     if (state >= ARRAY_SIZE(led_state)) {
 317         error_setg(errp, "%s invalid led state %s", __func__, state_str);
 318         return;
 319     }
 320
 321     reg = PCA9552_LS0 + led / 4;
 322     val = pca955x_read(s, reg);
 323     val = pca955x_ledsel(val, led % 4, state);
 324     pca955x_write(s, reg, val);
 325 }
 326
 327 static const VMStateDescription pca9552_vmstate = {
 328     .name = "PCA9552",
 329     .version_id = 0,
 330     .minimum_version_id = 0,
 331     .fields = (VMStateField[]) {
 332         VMSTATE_UINT8(len, PCA955xState),
 333         VMSTATE_UINT8(pointer, PCA955xState),
 334         VMSTATE_UINT8_ARRAY(regs, PCA955xState, PCA955X_NR_REGS),
 335         VMSTATE_I2C_SLAVE(i2c, PCA955xState),
 336         VMSTATE_END_OF_LIST()
 337     }
 338 };
 339
 340 static void pca9552_reset(DeviceState *dev)
 341 {
 342     PCA955xState *s = PCA955X(dev);
 343
 344     s->regs[PCA9552_PSC0] = 0xFF;
 345     s->regs[PCA9552_PWM0] = 0x80;
 346     s->regs[PCA9552_PSC1] = 0xFF;
 347     s->regs[PCA9552_PWM1] = 0x80;
 348     s->regs[PCA9552_LS0] = 0x55; /* all OFF */
 349     s->regs[PCA9552_LS1] = 0x55;
 350     s->regs[PCA9552_LS2] = 0x55;
 351     s->regs[PCA9552_LS3] = 0x55;
 352
 353     pca955x_update_pin_input(s);
 354
 355     s->pointer = 0xFF;
 356     s->len = 0;
 357 }
 358
 359 static void pca955x_initfn(Object *obj)
 360 {
 361     PCA955xClass *k = PCA955X_GET_CLASS(obj);
 362     int led;
 363
 364     assert(k->pin_count <= PCA955X_PIN_COUNT_MAX);
 365     for (led = 0; led < k->pin_count; led++) {
 366         char *name;
 367
 368         name = g_strdup_printf("led%d", led);
 369         object_property_add(obj, name, "bool", pca955x_get_led, pca955x_set_led,
 370                             NULL, NULL);
 371         g_free(name);
 372     }
 373 }
 374
 375 static void pca955x_realize(DeviceState *dev, Error **errp)
 376 {
 377     PCA955xClass *k = PCA955X_GET_CLASS(dev);
 378     PCA955xState *s = PCA955X(dev);
 379
 380     if (!s->description) {
 381         s->description = g_strdup("pca-unspecified");
 382     }
 383
 384     qdev_init_gpio_out(dev, s->gpio, k->pin_count);
 385 }
 386
 387 static Property pca955x_properties[] = {
 388     DEFINE_PROP_STRING("description", PCA955xState, description),
 389     DEFINE_PROP_END_OF_LIST(),
 390 };
 391
 392 static void pca955x_class_init(ObjectClass *klass, void *data)
 393 {
 394     DeviceClass *dc = DEVICE_CLASS(klass);
 395     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
 396
 397     k->event = pca955x_event;
 398     k->recv = pca955x_recv;
 399     k->send = pca955x_send;
 400     dc->realize = pca955x_realize;
 401     device_class_set_props(dc, pca955x_properties);
 402 }
 403
 404 static const TypeInfo pca955x_info = {
 405     .name          = TYPE_PCA955X,
 406     .parent        = TYPE_I2C_SLAVE,
 407     .instance_init = pca955x_initfn,
 408     .instance_size = sizeof(PCA955xState),
 409     .class_init    = pca955x_class_init,
 410     .class_size    = sizeof(PCA955xClass),
 411     .abstract      = true,
 412 };
 413
 414 static void pca9552_class_init(ObjectClass *oc, void *data)
 415 {
 416     DeviceClass *dc = DEVICE_CLASS(oc);
 417     PCA955xClass *pc = PCA955X_CLASS(oc);
 418
 419     dc->reset = pca9552_reset;
 420     dc->vmsd = &pca9552_vmstate;
 421     pc->max_reg = PCA9552_LS3;
 422     pc->pin_count = 16;
 423 }
 424
 425 static const TypeInfo pca9552_info = {
 426     .name          = TYPE_PCA9552,
 427     .parent        = TYPE_PCA955X,
 428     .class_init    = pca9552_class_init,
 429 };
 430
 431 static void pca955x_register_types(void)
 432 {
 433     type_register_static(&pca955x_info);
 434     type_register_static(&pca9552_info);
 435 }
 436
 437 type_init(pca955x_register_types)