?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
spapr: Don't use spapr_drc_needed() in CAS code
[qemu/kevin.git] / hw / gpio / aspeed_gpio.c
blob41e11ea9b04df58228cac3ee5e5a312077e3189d
1 /*
2 * ASPEED GPIO Controller
3 *
4 * Copyright (C) 2017-2019 IBM Corp.
5 *
6 * SPDX-License-Identifier: GPL-2.0-or-later
7 */
8
9 #include <assert.h>
10
11 #include "qemu/osdep.h"
12 #include "qemu/host-utils.h"
13 #include "qemu/log.h"
14 #include "hw/gpio/aspeed_gpio.h"
15 #include "include/hw/misc/aspeed_scu.h"
16 #include "qapi/error.h"
17 #include "qapi/visitor.h"
18 #include "hw/irq.h"
19 #include "migration/vmstate.h"
20
21 #define GPIOS_PER_REG 32
22 #define GPIOS_PER_SET GPIOS_PER_REG
23 #define GPIO_PIN_GAP_SIZE 4
24 #define GPIOS_PER_GROUP 8
25 #define GPIO_GROUP_SHIFT 3
26
27 /* GPIO Source Types */
28 #define ASPEED_CMD_SRC_MASK 0x01010101
29 #define ASPEED_SOURCE_ARM 0
30 #define ASPEED_SOURCE_LPC 1
31 #define ASPEED_SOURCE_COPROCESSOR 2
32 #define ASPEED_SOURCE_RESERVED 3
33
34 /* GPIO Interrupt Triggers */
35 /*
36 * For each set of gpios there are three sensitivity registers that control
37 * the interrupt trigger mode.
38 *
39 * | 2 | 1 | 0 | trigger mode
40 * -----------------------------
41 * | 0 | 0 | 0 | falling-edge
42 * | 0 | 0 | 1 | rising-edge
43 * | 0 | 1 | 0 | level-low
44 * | 0 | 1 | 1 | level-high
45 * | 1 | X | X | dual-edge
46 */
47 #define ASPEED_FALLING_EDGE 0
48 #define ASPEED_RISING_EDGE 1
49 #define ASPEED_LEVEL_LOW 2
50 #define ASPEED_LEVEL_HIGH 3
51 #define ASPEED_DUAL_EDGE 4
52
53 /* GPIO Register Address Offsets */
54 #define GPIO_ABCD_DATA_VALUE (0x000 >> 2)
55 #define GPIO_ABCD_DIRECTION (0x004 >> 2)
56 #define GPIO_ABCD_INT_ENABLE (0x008 >> 2)
57 #define GPIO_ABCD_INT_SENS_0 (0x00C >> 2)
58 #define GPIO_ABCD_INT_SENS_1 (0x010 >> 2)
59 #define GPIO_ABCD_INT_SENS_2 (0x014 >> 2)
60 #define GPIO_ABCD_INT_STATUS (0x018 >> 2)
61 #define GPIO_ABCD_RESET_TOLERANT (0x01C >> 2)
62 #define GPIO_EFGH_DATA_VALUE (0x020 >> 2)
63 #define GPIO_EFGH_DIRECTION (0x024 >> 2)
64 #define GPIO_EFGH_INT_ENABLE (0x028 >> 2)
65 #define GPIO_EFGH_INT_SENS_0 (0x02C >> 2)
66 #define GPIO_EFGH_INT_SENS_1 (0x030 >> 2)
67 #define GPIO_EFGH_INT_SENS_2 (0x034 >> 2)
68 #define GPIO_EFGH_INT_STATUS (0x038 >> 2)
69 #define GPIO_EFGH_RESET_TOLERANT (0x03C >> 2)
70 #define GPIO_ABCD_DEBOUNCE_1 (0x040 >> 2)
71 #define GPIO_ABCD_DEBOUNCE_2 (0x044 >> 2)
72 #define GPIO_EFGH_DEBOUNCE_1 (0x048 >> 2)
73 #define GPIO_EFGH_DEBOUNCE_2 (0x04C >> 2)
74 #define GPIO_DEBOUNCE_TIME_1 (0x050 >> 2)
75 #define GPIO_DEBOUNCE_TIME_2 (0x054 >> 2)
76 #define GPIO_DEBOUNCE_TIME_3 (0x058 >> 2)
77 #define GPIO_ABCD_COMMAND_SRC_0 (0x060 >> 2)
78 #define GPIO_ABCD_COMMAND_SRC_1 (0x064 >> 2)
79 #define GPIO_EFGH_COMMAND_SRC_0 (0x068 >> 2)
80 #define GPIO_EFGH_COMMAND_SRC_1 (0x06C >> 2)
81 #define GPIO_IJKL_DATA_VALUE (0x070 >> 2)
82 #define GPIO_IJKL_DIRECTION (0x074 >> 2)
83 #define GPIO_MNOP_DATA_VALUE (0x078 >> 2)
84 #define GPIO_MNOP_DIRECTION (0x07C >> 2)
85 #define GPIO_QRST_DATA_VALUE (0x080 >> 2)
86 #define GPIO_QRST_DIRECTION (0x084 >> 2)
87 #define GPIO_UVWX_DATA_VALUE (0x088 >> 2)
88 #define GPIO_UVWX_DIRECTION (0x08C >> 2)
89 #define GPIO_IJKL_COMMAND_SRC_0 (0x090 >> 2)
90 #define GPIO_IJKL_COMMAND_SRC_1 (0x094 >> 2)
91 #define GPIO_IJKL_INT_ENABLE (0x098 >> 2)
92 #define GPIO_IJKL_INT_SENS_0 (0x09C >> 2)
93 #define GPIO_IJKL_INT_SENS_1 (0x0A0 >> 2)
94 #define GPIO_IJKL_INT_SENS_2 (0x0A4 >> 2)
95 #define GPIO_IJKL_INT_STATUS (0x0A8 >> 2)
96 #define GPIO_IJKL_RESET_TOLERANT (0x0AC >> 2)
97 #define GPIO_IJKL_DEBOUNCE_1 (0x0B0 >> 2)
98 #define GPIO_IJKL_DEBOUNCE_2 (0x0B4 >> 2)
99 #define GPIO_IJKL_INPUT_MASK (0x0B8 >> 2)
100 #define GPIO_ABCD_DATA_READ (0x0C0 >> 2)
101 #define GPIO_EFGH_DATA_READ (0x0C4 >> 2)
102 #define GPIO_IJKL_DATA_READ (0x0C8 >> 2)
103 #define GPIO_MNOP_DATA_READ (0x0CC >> 2)
104 #define GPIO_QRST_DATA_READ (0x0D0 >> 2)
105 #define GPIO_UVWX_DATA_READ (0x0D4 >> 2)
106 #define GPIO_YZAAAB_DATA_READ (0x0D8 >> 2)
107 #define GPIO_AC_DATA_READ (0x0DC >> 2)
108 #define GPIO_MNOP_COMMAND_SRC_0 (0x0E0 >> 2)
109 #define GPIO_MNOP_COMMAND_SRC_1 (0x0E4 >> 2)
110 #define GPIO_MNOP_INT_ENABLE (0x0E8 >> 2)
111 #define GPIO_MNOP_INT_SENS_0 (0x0EC >> 2)
112 #define GPIO_MNOP_INT_SENS_1 (0x0F0 >> 2)
113 #define GPIO_MNOP_INT_SENS_2 (0x0F4 >> 2)
114 #define GPIO_MNOP_INT_STATUS (0x0F8 >> 2)
115 #define GPIO_MNOP_RESET_TOLERANT (0x0FC >> 2)
116 #define GPIO_MNOP_DEBOUNCE_1 (0x100 >> 2)
117 #define GPIO_MNOP_DEBOUNCE_2 (0x104 >> 2)
118 #define GPIO_MNOP_INPUT_MASK (0x108 >> 2)
119 #define GPIO_QRST_COMMAND_SRC_0 (0x110 >> 2)
120 #define GPIO_QRST_COMMAND_SRC_1 (0x114 >> 2)
121 #define GPIO_QRST_INT_ENABLE (0x118 >> 2)
122 #define GPIO_QRST_INT_SENS_0 (0x11C >> 2)
123 #define GPIO_QRST_INT_SENS_1 (0x120 >> 2)
124 #define GPIO_QRST_INT_SENS_2 (0x124 >> 2)
125 #define GPIO_QRST_INT_STATUS (0x128 >> 2)
126 #define GPIO_QRST_RESET_TOLERANT (0x12C >> 2)
127 #define GPIO_QRST_DEBOUNCE_1 (0x130 >> 2)
128 #define GPIO_QRST_DEBOUNCE_2 (0x134 >> 2)
129 #define GPIO_QRST_INPUT_MASK (0x138 >> 2)
130 #define GPIO_UVWX_COMMAND_SRC_0 (0x140 >> 2)
131 #define GPIO_UVWX_COMMAND_SRC_1 (0x144 >> 2)
132 #define GPIO_UVWX_INT_ENABLE (0x148 >> 2)
133 #define GPIO_UVWX_INT_SENS_0 (0x14C >> 2)
134 #define GPIO_UVWX_INT_SENS_1 (0x150 >> 2)
135 #define GPIO_UVWX_INT_SENS_2 (0x154 >> 2)
136 #define GPIO_UVWX_INT_STATUS (0x158 >> 2)
137 #define GPIO_UVWX_RESET_TOLERANT (0x15C >> 2)
138 #define GPIO_UVWX_DEBOUNCE_1 (0x160 >> 2)
139 #define GPIO_UVWX_DEBOUNCE_2 (0x164 >> 2)
140 #define GPIO_UVWX_INPUT_MASK (0x168 >> 2)
141 #define GPIO_YZAAAB_COMMAND_SRC_0 (0x170 >> 2)
142 #define GPIO_YZAAAB_COMMAND_SRC_1 (0x174 >> 2)
143 #define GPIO_YZAAAB_INT_ENABLE (0x178 >> 2)
144 #define GPIO_YZAAAB_INT_SENS_0 (0x17C >> 2)
145 #define GPIO_YZAAAB_INT_SENS_1 (0x180 >> 2)
146 #define GPIO_YZAAAB_INT_SENS_2 (0x184 >> 2)
147 #define GPIO_YZAAAB_INT_STATUS (0x188 >> 2)
148 #define GPIO_YZAAAB_RESET_TOLERANT (0x18C >> 2)
149 #define GPIO_YZAAAB_DEBOUNCE_1 (0x190 >> 2)
150 #define GPIO_YZAAAB_DEBOUNCE_2 (0x194 >> 2)
151 #define GPIO_YZAAAB_INPUT_MASK (0x198 >> 2)
152 #define GPIO_AC_COMMAND_SRC_0 (0x1A0 >> 2)
153 #define GPIO_AC_COMMAND_SRC_1 (0x1A4 >> 2)
154 #define GPIO_AC_INT_ENABLE (0x1A8 >> 2)
155 #define GPIO_AC_INT_SENS_0 (0x1AC >> 2)
156 #define GPIO_AC_INT_SENS_1 (0x1B0 >> 2)
157 #define GPIO_AC_INT_SENS_2 (0x1B4 >> 2)
158 #define GPIO_AC_INT_STATUS (0x1B8 >> 2)
159 #define GPIO_AC_RESET_TOLERANT (0x1BC >> 2)
160 #define GPIO_AC_DEBOUNCE_1 (0x1C0 >> 2)
161 #define GPIO_AC_DEBOUNCE_2 (0x1C4 >> 2)
162 #define GPIO_AC_INPUT_MASK (0x1C8 >> 2)
163 #define GPIO_ABCD_INPUT_MASK (0x1D0 >> 2)
164 #define GPIO_EFGH_INPUT_MASK (0x1D4 >> 2)
165 #define GPIO_YZAAAB_DATA_VALUE (0x1E0 >> 2)
166 #define GPIO_YZAAAB_DIRECTION (0x1E4 >> 2)
167 #define GPIO_AC_DATA_VALUE (0x1E8 >> 2)
168 #define GPIO_AC_DIRECTION (0x1EC >> 2)
169 #define GPIO_3_6V_MEM_SIZE 0x1F0
170 #define GPIO_3_6V_REG_ARRAY_SIZE (GPIO_3_6V_MEM_SIZE >> 2)
171
172 /* AST2600 only - 1.8V gpios */
173 /*
174 * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198)
175 * and addtional 1.8V gpios (memory offsets 0x800-0x9D4).
176 */
177 #define GPIO_1_8V_REG_OFFSET 0x800
178 #define GPIO_1_8V_ABCD_DATA_VALUE ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2)
179 #define GPIO_1_8V_ABCD_DIRECTION ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2)
180 #define GPIO_1_8V_ABCD_INT_ENABLE ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2)
181 #define GPIO_1_8V_ABCD_INT_SENS_0 ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2)
182 #define GPIO_1_8V_ABCD_INT_SENS_1 ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2)
183 #define GPIO_1_8V_ABCD_INT_SENS_2 ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2)
184 #define GPIO_1_8V_ABCD_INT_STATUS ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2)
185 #define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2)
186 #define GPIO_1_8V_E_DATA_VALUE ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2)
187 #define GPIO_1_8V_E_DIRECTION ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2)
188 #define GPIO_1_8V_E_INT_ENABLE ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2)
189 #define GPIO_1_8V_E_INT_SENS_0 ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2)
190 #define GPIO_1_8V_E_INT_SENS_1 ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2)
191 #define GPIO_1_8V_E_INT_SENS_2 ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2)
192 #define GPIO_1_8V_E_INT_STATUS ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2)
193 #define GPIO_1_8V_E_RESET_TOLERANT ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2)
194 #define GPIO_1_8V_ABCD_DEBOUNCE_1 ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2)
195 #define GPIO_1_8V_ABCD_DEBOUNCE_2 ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2)
196 #define GPIO_1_8V_E_DEBOUNCE_1 ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2)
197 #define GPIO_1_8V_E_DEBOUNCE_2 ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2)
198 #define GPIO_1_8V_DEBOUNCE_TIME_1 ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2)
199 #define GPIO_1_8V_DEBOUNCE_TIME_2 ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2)
200 #define GPIO_1_8V_DEBOUNCE_TIME_3 ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2)
201 #define GPIO_1_8V_ABCD_COMMAND_SRC_0 ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2)
202 #define GPIO_1_8V_ABCD_COMMAND_SRC_1 ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2)
203 #define GPIO_1_8V_E_COMMAND_SRC_0 ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2)
204 #define GPIO_1_8V_E_COMMAND_SRC_1 ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2)
205 #define GPIO_1_8V_ABCD_DATA_READ ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2)
206 #define GPIO_1_8V_E_DATA_READ ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2)
207 #define GPIO_1_8V_ABCD_INPUT_MASK ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2)
208 #define GPIO_1_8V_E_INPUT_MASK ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2)
209 #define GPIO_1_8V_MEM_SIZE 0x9D8
210 #define GPIO_1_8V_REG_ARRAY_SIZE ((GPIO_1_8V_MEM_SIZE - \
211 GPIO_1_8V_REG_OFFSET) >> 2)
212 #define GPIO_MAX_MEM_SIZE MAX(GPIO_3_6V_MEM_SIZE, GPIO_1_8V_MEM_SIZE)
213
214 static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio)
215 {
216 uint32_t falling_edge = 0, rising_edge = 0;
217 uint32_t int_trigger = extract32(regs->int_sens_0, gpio, 1)
218 | extract32(regs->int_sens_1, gpio, 1) << 1
219 | extract32(regs->int_sens_2, gpio, 1) << 2;
220 uint32_t gpio_curr_high = extract32(regs->data_value, gpio, 1);
221 uint32_t gpio_int_enabled = extract32(regs->int_enable, gpio, 1);
222
223 if (!gpio_int_enabled) {
224 return 0;
225 }
226
227 /* Detect edges */
228 if (gpio_curr_high && !gpio_prev_high) {
229 rising_edge = 1;
230 } else if (!gpio_curr_high && gpio_prev_high) {
231 falling_edge = 1;
232 }
233
234 if (((int_trigger == ASPEED_FALLING_EDGE) && falling_edge) ||
235 ((int_trigger == ASPEED_RISING_EDGE) && rising_edge) ||
236 ((int_trigger == ASPEED_LEVEL_LOW) && !gpio_curr_high) ||
237 ((int_trigger == ASPEED_LEVEL_HIGH) && gpio_curr_high) ||
238 ((int_trigger >= ASPEED_DUAL_EDGE) && (rising_edge || falling_edge)))
239 {
240 regs->int_status = deposit32(regs->int_status, gpio, 1, 1);
241 return 1;
242 }
243 return 0;
244 }
245
246 #define nested_struct_index(ta, pa, m, tb, pb) \
247 (pb - ((tb *)(((char *)pa) + offsetof(ta, m))))
248
249 static ptrdiff_t aspeed_gpio_set_idx(AspeedGPIOState *s, GPIOSets *regs)
250 {
251 return nested_struct_index(AspeedGPIOState, s, sets, GPIOSets, regs);
252 }
253
254 static void aspeed_gpio_update(AspeedGPIOState *s, GPIOSets *regs,
255 uint32_t value)
256 {
257 uint32_t input_mask = regs->input_mask;
258 uint32_t direction = regs->direction;
259 uint32_t old = regs->data_value;
260 uint32_t new = value;
261 uint32_t diff;
262 int gpio;
263
264 diff = old ^ new;
265 if (diff) {
266 for (gpio = 0; gpio < GPIOS_PER_REG; gpio++) {
267 uint32_t mask = 1 << gpio;
268
269 /* If the gpio needs to be updated... */
270 if (!(diff & mask)) {
271 continue;
272 }
273
274 /* ...and we're output or not input-masked... */
275 if (!(direction & mask) && (input_mask & mask)) {
276 continue;
277 }
278
279 /* ...then update the state. */
280 if (mask & new) {
281 regs->data_value |= mask;
282 } else {
283 regs->data_value &= ~mask;
284 }
285
286 /* If the gpio is set to output... */
287 if (direction & mask) {
288 /* ...trigger the line-state IRQ */
289 ptrdiff_t set = aspeed_gpio_set_idx(s, regs);
290 size_t offset = set * GPIOS_PER_SET + gpio;
291 qemu_set_irq(s->gpios[offset], !!(new & mask));
292 } else {
293 /* ...otherwise if we meet the line's current IRQ policy... */
294 if (aspeed_evaluate_irq(regs, old & mask, gpio)) {
295 /* ...trigger the VIC IRQ */
296 s->pending++;
297 }
298 }
299 }
300 }
301 qemu_set_irq(s->irq, !!(s->pending));
302 }
303
304 static uint32_t aspeed_adjust_pin(AspeedGPIOState *s, uint32_t pin)
305 {
306 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
307 /*
308 * The 2500 has a 4 pin gap in group AB and the 2400 has a 4 pin
309 * gap in group Y (and only four pins in AB but this is the last group so
310 * it doesn't matter).
311 */
312 if (agc->gap && pin >= agc->gap) {
313 pin += GPIO_PIN_GAP_SIZE;
314 }
315
316 return pin;
317 }
318
319 static bool aspeed_gpio_get_pin_level(AspeedGPIOState *s, uint32_t set_idx,
320 uint32_t pin)
321 {
322 uint32_t reg_val;
323 uint32_t pin_mask = 1 << pin;
324
325 reg_val = s->sets[set_idx].data_value;
326
327 return !!(reg_val & pin_mask);
328 }
329
330 static void aspeed_gpio_set_pin_level(AspeedGPIOState *s, uint32_t set_idx,
331 uint32_t pin, bool level)
332 {
333 uint32_t value = s->sets[set_idx].data_value;
334 uint32_t pin_mask = 1 << pin;
335
336 if (level) {
337 value |= pin_mask;
338 } else {
339 value &= !pin_mask;
340 }
341
342 aspeed_gpio_update(s, &s->sets[set_idx], value);
343 }
344
345 /*
346 * | src_1 | src_2 | source |
347 * |-----------------------------|
348 * | 0 | 0 | ARM |
349 * | 0 | 1 | LPC |
350 * | 1 | 0 | Coprocessor|
351 * | 1 | 1 | Reserved |
352 *
353 * Once the source of a set is programmed, corresponding bits in the
354 * data_value, direction, interrupt [enable, sens[0-2]], reset_tol and
355 * debounce registers can only be written by the source.
356 *
357 * Source is ARM by default
358 * only bits 24, 16, 8, and 0 can be set
359 *
360 * we don't currently have a model for the LPC or Coprocessor
361 */
362 static uint32_t update_value_control_source(GPIOSets *regs, uint32_t old_value,
363 uint32_t value)
364 {
365 int i;
366 int cmd_source;
367
368 /* assume the source is always ARM for now */
369 int source = ASPEED_SOURCE_ARM;
370
371 uint32_t new_value = 0;
372
373 /* for each group in set */
374 for (i = 0; i < GPIOS_PER_REG; i += GPIOS_PER_GROUP) {
375 cmd_source = extract32(regs->cmd_source_0, i, 1)
376 | (extract32(regs->cmd_source_1, i, 1) << 1);
377
378 if (source == cmd_source) {
379 new_value |= (0xff << i) & value;
380 } else {
381 new_value |= (0xff << i) & old_value;
382 }
383 }
384 return new_value;
385 }
386
387 static const AspeedGPIOReg aspeed_3_6v_gpios[GPIO_3_6V_REG_ARRAY_SIZE] = {
388 /* Set ABCD */
389 [GPIO_ABCD_DATA_VALUE] = { 0, gpio_reg_data_value },
390 [GPIO_ABCD_DIRECTION] = { 0, gpio_reg_direction },
391 [GPIO_ABCD_INT_ENABLE] = { 0, gpio_reg_int_enable },
392 [GPIO_ABCD_INT_SENS_0] = { 0, gpio_reg_int_sens_0 },
393 [GPIO_ABCD_INT_SENS_1] = { 0, gpio_reg_int_sens_1 },
394 [GPIO_ABCD_INT_SENS_2] = { 0, gpio_reg_int_sens_2 },
395 [GPIO_ABCD_INT_STATUS] = { 0, gpio_reg_int_status },
396 [GPIO_ABCD_RESET_TOLERANT] = { 0, gpio_reg_reset_tolerant },
397 [GPIO_ABCD_DEBOUNCE_1] = { 0, gpio_reg_debounce_1 },
398 [GPIO_ABCD_DEBOUNCE_2] = { 0, gpio_reg_debounce_2 },
399 [GPIO_ABCD_COMMAND_SRC_0] = { 0, gpio_reg_cmd_source_0 },
400 [GPIO_ABCD_COMMAND_SRC_1] = { 0, gpio_reg_cmd_source_1 },
401 [GPIO_ABCD_DATA_READ] = { 0, gpio_reg_data_read },
402 [GPIO_ABCD_INPUT_MASK] = { 0, gpio_reg_input_mask },
403 /* Set EFGH */
404 [GPIO_EFGH_DATA_VALUE] = { 1, gpio_reg_data_value },
405 [GPIO_EFGH_DIRECTION] = { 1, gpio_reg_direction },
406 [GPIO_EFGH_INT_ENABLE] = { 1, gpio_reg_int_enable },
407 [GPIO_EFGH_INT_SENS_0] = { 1, gpio_reg_int_sens_0 },
408 [GPIO_EFGH_INT_SENS_1] = { 1, gpio_reg_int_sens_1 },
409 [GPIO_EFGH_INT_SENS_2] = { 1, gpio_reg_int_sens_2 },
410 [GPIO_EFGH_INT_STATUS] = { 1, gpio_reg_int_status },
411 [GPIO_EFGH_RESET_TOLERANT] = { 1, gpio_reg_reset_tolerant },
412 [GPIO_EFGH_DEBOUNCE_1] = { 1, gpio_reg_debounce_1 },
413 [GPIO_EFGH_DEBOUNCE_2] = { 1, gpio_reg_debounce_2 },
414 [GPIO_EFGH_COMMAND_SRC_0] = { 1, gpio_reg_cmd_source_0 },
415 [GPIO_EFGH_COMMAND_SRC_1] = { 1, gpio_reg_cmd_source_1 },
416 [GPIO_EFGH_DATA_READ] = { 1, gpio_reg_data_read },
417 [GPIO_EFGH_INPUT_MASK] = { 1, gpio_reg_input_mask },
418 /* Set IJKL */
419 [GPIO_IJKL_DATA_VALUE] = { 2, gpio_reg_data_value },
420 [GPIO_IJKL_DIRECTION] = { 2, gpio_reg_direction },
421 [GPIO_IJKL_INT_ENABLE] = { 2, gpio_reg_int_enable },
422 [GPIO_IJKL_INT_SENS_0] = { 2, gpio_reg_int_sens_0 },
423 [GPIO_IJKL_INT_SENS_1] = { 2, gpio_reg_int_sens_1 },
424 [GPIO_IJKL_INT_SENS_2] = { 2, gpio_reg_int_sens_2 },
425 [GPIO_IJKL_INT_STATUS] = { 2, gpio_reg_int_status },
426 [GPIO_IJKL_RESET_TOLERANT] = { 2, gpio_reg_reset_tolerant },
427 [GPIO_IJKL_DEBOUNCE_1] = { 2, gpio_reg_debounce_1 },
428 [GPIO_IJKL_DEBOUNCE_2] = { 2, gpio_reg_debounce_2 },
429 [GPIO_IJKL_COMMAND_SRC_0] = { 2, gpio_reg_cmd_source_0 },
430 [GPIO_IJKL_COMMAND_SRC_1] = { 2, gpio_reg_cmd_source_1 },
431 [GPIO_IJKL_DATA_READ] = { 2, gpio_reg_data_read },
432 [GPIO_IJKL_INPUT_MASK] = { 2, gpio_reg_input_mask },
433 /* Set MNOP */
434 [GPIO_MNOP_DATA_VALUE] = { 3, gpio_reg_data_value },
435 [GPIO_MNOP_DIRECTION] = { 3, gpio_reg_direction },
436 [GPIO_MNOP_INT_ENABLE] = { 3, gpio_reg_int_enable },
437 [GPIO_MNOP_INT_SENS_0] = { 3, gpio_reg_int_sens_0 },
438 [GPIO_MNOP_INT_SENS_1] = { 3, gpio_reg_int_sens_1 },
439 [GPIO_MNOP_INT_SENS_2] = { 3, gpio_reg_int_sens_2 },
440 [GPIO_MNOP_INT_STATUS] = { 3, gpio_reg_int_status },
441 [GPIO_MNOP_RESET_TOLERANT] = { 3, gpio_reg_reset_tolerant },
442 [GPIO_MNOP_DEBOUNCE_1] = { 3, gpio_reg_debounce_1 },
443 [GPIO_MNOP_DEBOUNCE_2] = { 3, gpio_reg_debounce_2 },
444 [GPIO_MNOP_COMMAND_SRC_0] = { 3, gpio_reg_cmd_source_0 },
445 [GPIO_MNOP_COMMAND_SRC_1] = { 3, gpio_reg_cmd_source_1 },
446 [GPIO_MNOP_DATA_READ] = { 3, gpio_reg_data_read },
447 [GPIO_MNOP_INPUT_MASK] = { 3, gpio_reg_input_mask },
448 /* Set QRST */
449 [GPIO_QRST_DATA_VALUE] = { 4, gpio_reg_data_value },
450 [GPIO_QRST_DIRECTION] = { 4, gpio_reg_direction },
451 [GPIO_QRST_INT_ENABLE] = { 4, gpio_reg_int_enable },
452 [GPIO_QRST_INT_SENS_0] = { 4, gpio_reg_int_sens_0 },
453 [GPIO_QRST_INT_SENS_1] = { 4, gpio_reg_int_sens_1 },
454 [GPIO_QRST_INT_SENS_2] = { 4, gpio_reg_int_sens_2 },
455 [GPIO_QRST_INT_STATUS] = { 4, gpio_reg_int_status },
456 [GPIO_QRST_RESET_TOLERANT] = { 4, gpio_reg_reset_tolerant },
457 [GPIO_QRST_DEBOUNCE_1] = { 4, gpio_reg_debounce_1 },
458 [GPIO_QRST_DEBOUNCE_2] = { 4, gpio_reg_debounce_2 },
459 [GPIO_QRST_COMMAND_SRC_0] = { 4, gpio_reg_cmd_source_0 },
460 [GPIO_QRST_COMMAND_SRC_1] = { 4, gpio_reg_cmd_source_1 },
461 [GPIO_QRST_DATA_READ] = { 4, gpio_reg_data_read },
462 [GPIO_QRST_INPUT_MASK] = { 4, gpio_reg_input_mask },
463 /* Set UVWX */
464 [GPIO_UVWX_DATA_VALUE] = { 5, gpio_reg_data_value },
465 [GPIO_UVWX_DIRECTION] = { 5, gpio_reg_direction },
466 [GPIO_UVWX_INT_ENABLE] = { 5, gpio_reg_int_enable },
467 [GPIO_UVWX_INT_SENS_0] = { 5, gpio_reg_int_sens_0 },
468 [GPIO_UVWX_INT_SENS_1] = { 5, gpio_reg_int_sens_1 },
469 [GPIO_UVWX_INT_SENS_2] = { 5, gpio_reg_int_sens_2 },
470 [GPIO_UVWX_INT_STATUS] = { 5, gpio_reg_int_status },
471 [GPIO_UVWX_RESET_TOLERANT] = { 5, gpio_reg_reset_tolerant },
472 [GPIO_UVWX_DEBOUNCE_1] = { 5, gpio_reg_debounce_1 },
473 [GPIO_UVWX_DEBOUNCE_2] = { 5, gpio_reg_debounce_2 },
474 [GPIO_UVWX_COMMAND_SRC_0] = { 5, gpio_reg_cmd_source_0 },
475 [GPIO_UVWX_COMMAND_SRC_1] = { 5, gpio_reg_cmd_source_1 },
476 [GPIO_UVWX_DATA_READ] = { 5, gpio_reg_data_read },
477 [GPIO_UVWX_INPUT_MASK] = { 5, gpio_reg_input_mask },
478 /* Set YZAAAB */
479 [GPIO_YZAAAB_DATA_VALUE] = { 6, gpio_reg_data_value },
480 [GPIO_YZAAAB_DIRECTION] = { 6, gpio_reg_direction },
481 [GPIO_YZAAAB_INT_ENABLE] = { 6, gpio_reg_int_enable },
482 [GPIO_YZAAAB_INT_SENS_0] = { 6, gpio_reg_int_sens_0 },
483 [GPIO_YZAAAB_INT_SENS_1] = { 6, gpio_reg_int_sens_1 },
484 [GPIO_YZAAAB_INT_SENS_2] = { 6, gpio_reg_int_sens_2 },
485 [GPIO_YZAAAB_INT_STATUS] = { 6, gpio_reg_int_status },
486 [GPIO_YZAAAB_RESET_TOLERANT] = { 6, gpio_reg_reset_tolerant },
487 [GPIO_YZAAAB_DEBOUNCE_1] = { 6, gpio_reg_debounce_1 },
488 [GPIO_YZAAAB_DEBOUNCE_2] = { 6, gpio_reg_debounce_2 },
489 [GPIO_YZAAAB_COMMAND_SRC_0] = { 6, gpio_reg_cmd_source_0 },
490 [GPIO_YZAAAB_COMMAND_SRC_1] = { 6, gpio_reg_cmd_source_1 },
491 [GPIO_YZAAAB_DATA_READ] = { 6, gpio_reg_data_read },
492 [GPIO_YZAAAB_INPUT_MASK] = { 6, gpio_reg_input_mask },
493 /* Set AC (ast2500 only) */
494 [GPIO_AC_DATA_VALUE] = { 7, gpio_reg_data_value },
495 [GPIO_AC_DIRECTION] = { 7, gpio_reg_direction },
496 [GPIO_AC_INT_ENABLE] = { 7, gpio_reg_int_enable },
497 [GPIO_AC_INT_SENS_0] = { 7, gpio_reg_int_sens_0 },
498 [GPIO_AC_INT_SENS_1] = { 7, gpio_reg_int_sens_1 },
499 [GPIO_AC_INT_SENS_2] = { 7, gpio_reg_int_sens_2 },
500 [GPIO_AC_INT_STATUS] = { 7, gpio_reg_int_status },
501 [GPIO_AC_RESET_TOLERANT] = { 7, gpio_reg_reset_tolerant },
502 [GPIO_AC_DEBOUNCE_1] = { 7, gpio_reg_debounce_1 },
503 [GPIO_AC_DEBOUNCE_2] = { 7, gpio_reg_debounce_2 },
504 [GPIO_AC_COMMAND_SRC_0] = { 7, gpio_reg_cmd_source_0 },
505 [GPIO_AC_COMMAND_SRC_1] = { 7, gpio_reg_cmd_source_1 },
506 [GPIO_AC_DATA_READ] = { 7, gpio_reg_data_read },
507 [GPIO_AC_INPUT_MASK] = { 7, gpio_reg_input_mask },
508 };
509
510 static const AspeedGPIOReg aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = {
511 /* 1.8V Set ABCD */
512 [GPIO_1_8V_ABCD_DATA_VALUE] = {0, gpio_reg_data_value},
513 [GPIO_1_8V_ABCD_DIRECTION] = {0, gpio_reg_direction},
514 [GPIO_1_8V_ABCD_INT_ENABLE] = {0, gpio_reg_int_enable},
515 [GPIO_1_8V_ABCD_INT_SENS_0] = {0, gpio_reg_int_sens_0},
516 [GPIO_1_8V_ABCD_INT_SENS_1] = {0, gpio_reg_int_sens_1},
517 [GPIO_1_8V_ABCD_INT_SENS_2] = {0, gpio_reg_int_sens_2},
518 [GPIO_1_8V_ABCD_INT_STATUS] = {0, gpio_reg_int_status},
519 [GPIO_1_8V_ABCD_RESET_TOLERANT] = {0, gpio_reg_reset_tolerant},
520 [GPIO_1_8V_ABCD_DEBOUNCE_1] = {0, gpio_reg_debounce_1},
521 [GPIO_1_8V_ABCD_DEBOUNCE_2] = {0, gpio_reg_debounce_2},
522 [GPIO_1_8V_ABCD_COMMAND_SRC_0] = {0, gpio_reg_cmd_source_0},
523 [GPIO_1_8V_ABCD_COMMAND_SRC_1] = {0, gpio_reg_cmd_source_1},
524 [GPIO_1_8V_ABCD_DATA_READ] = {0, gpio_reg_data_read},
525 [GPIO_1_8V_ABCD_INPUT_MASK] = {0, gpio_reg_input_mask},
526 /* 1.8V Set E */
527 [GPIO_1_8V_E_DATA_VALUE] = {1, gpio_reg_data_value},
528 [GPIO_1_8V_E_DIRECTION] = {1, gpio_reg_direction},
529 [GPIO_1_8V_E_INT_ENABLE] = {1, gpio_reg_int_enable},
530 [GPIO_1_8V_E_INT_SENS_0] = {1, gpio_reg_int_sens_0},
531 [GPIO_1_8V_E_INT_SENS_1] = {1, gpio_reg_int_sens_1},
532 [GPIO_1_8V_E_INT_SENS_2] = {1, gpio_reg_int_sens_2},
533 [GPIO_1_8V_E_INT_STATUS] = {1, gpio_reg_int_status},
534 [GPIO_1_8V_E_RESET_TOLERANT] = {1, gpio_reg_reset_tolerant},
535 [GPIO_1_8V_E_DEBOUNCE_1] = {1, gpio_reg_debounce_1},
536 [GPIO_1_8V_E_DEBOUNCE_2] = {1, gpio_reg_debounce_2},
537 [GPIO_1_8V_E_COMMAND_SRC_0] = {1, gpio_reg_cmd_source_0},
538 [GPIO_1_8V_E_COMMAND_SRC_1] = {1, gpio_reg_cmd_source_1},
539 [GPIO_1_8V_E_DATA_READ] = {1, gpio_reg_data_read},
540 [GPIO_1_8V_E_INPUT_MASK] = {1, gpio_reg_input_mask},
541 };
542
543 static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size)
544 {
545 AspeedGPIOState *s = ASPEED_GPIO(opaque);
546 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
547 uint64_t idx = -1;
548 const AspeedGPIOReg *reg;
549 GPIOSets *set;
550
551 idx = offset >> 2;
552 if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
553 idx -= GPIO_DEBOUNCE_TIME_1;
554 return (uint64_t) s->debounce_regs[idx];
555 }
556
557 reg = &agc->reg_table[idx];
558 if (reg->set_idx >= agc->nr_gpio_sets) {
559 qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%"
560 HWADDR_PRIx"\n", __func__, offset);
561 return 0;
562 }
563
564 set = &s->sets[reg->set_idx];
565 switch (reg->type) {
566 case gpio_reg_data_value:
567 return set->data_value;
568 case gpio_reg_direction:
569 return set->direction;
570 case gpio_reg_int_enable:
571 return set->int_enable;
572 case gpio_reg_int_sens_0:
573 return set->int_sens_0;
574 case gpio_reg_int_sens_1:
575 return set->int_sens_1;
576 case gpio_reg_int_sens_2:
577 return set->int_sens_2;
578 case gpio_reg_int_status:
579 return set->int_status;
580 case gpio_reg_reset_tolerant:
581 return set->reset_tol;
582 case gpio_reg_debounce_1:
583 return set->debounce_1;
584 case gpio_reg_debounce_2:
585 return set->debounce_2;
586 case gpio_reg_cmd_source_0:
587 return set->cmd_source_0;
588 case gpio_reg_cmd_source_1:
589 return set->cmd_source_1;
590 case gpio_reg_data_read:
591 return set->data_read;
592 case gpio_reg_input_mask:
593 return set->input_mask;
594 default:
595 qemu_log_mask(LOG_GUEST_ERROR, "%s: no getter for offset 0x%"
596 HWADDR_PRIx"\n", __func__, offset);
597 return 0;
598 };
599 }
600
601 static void aspeed_gpio_write(void *opaque, hwaddr offset, uint64_t data,
602 uint32_t size)
603 {
604 AspeedGPIOState *s = ASPEED_GPIO(opaque);
605 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
606 const GPIOSetProperties *props;
607 uint64_t idx = -1;
608 const AspeedGPIOReg *reg;
609 GPIOSets *set;
610 uint32_t cleared;
611
612 idx = offset >> 2;
613 if (idx >= GPIO_DEBOUNCE_TIME_1 && idx <= GPIO_DEBOUNCE_TIME_3) {
614 idx -= GPIO_DEBOUNCE_TIME_1;
615 s->debounce_regs[idx] = (uint32_t) data;
616 return;
617 }
618
619 reg = &agc->reg_table[idx];
620 if (reg->set_idx >= agc->nr_gpio_sets) {
621 qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
622 HWADDR_PRIx"\n", __func__, offset);
623 return;
624 }
625
626 set = &s->sets[reg->set_idx];
627 props = &agc->props[reg->set_idx];
628
629 switch (reg->type) {
630 case gpio_reg_data_value:
631 data &= props->output;
632 data = update_value_control_source(set, set->data_value, data);
633 set->data_read = data;
634 aspeed_gpio_update(s, set, data);
635 return;
636 case gpio_reg_direction:
637 /*
638 * where data is the value attempted to be written to the pin:
639 * pin type | input mask | output mask | expected value
640 * ------------------------------------------------------------
641 * bidirectional | 1 | 1 | data
642 * input only | 1 | 0 | 0
643 * output only | 0 | 1 | 1
644 * no pin / gap | 0 | 0 | 0
645 *
646 * which is captured by:
647 * data = ( data | ~input) & output;
648 */
649 data = (data | ~props->input) & props->output;
650 set->direction = update_value_control_source(set, set->direction, data);
651 break;
652 case gpio_reg_int_enable:
653 set->int_enable = update_value_control_source(set, set->int_enable,
654 data);
655 break;
656 case gpio_reg_int_sens_0:
657 set->int_sens_0 = update_value_control_source(set, set->int_sens_0,
658 data);
659 break;
660 case gpio_reg_int_sens_1:
661 set->int_sens_1 = update_value_control_source(set, set->int_sens_1,
662 data);
663 break;
664 case gpio_reg_int_sens_2:
665 set->int_sens_2 = update_value_control_source(set, set->int_sens_2,
666 data);
667 break;
668 case gpio_reg_int_status:
669 cleared = ctpop32(data & set->int_status);
670 if (s->pending && cleared) {
671 assert(s->pending >= cleared);
672 s->pending -= cleared;
673 }
674 set->int_status &= ~data;
675 break;
676 case gpio_reg_reset_tolerant:
677 set->reset_tol = update_value_control_source(set, set->reset_tol,
678 data);
679 return;
680 case gpio_reg_debounce_1:
681 set->debounce_1 = update_value_control_source(set, set->debounce_1,
682 data);
683 return;
684 case gpio_reg_debounce_2:
685 set->debounce_2 = update_value_control_source(set, set->debounce_2,
686 data);
687 return;
688 case gpio_reg_cmd_source_0:
689 set->cmd_source_0 = data & ASPEED_CMD_SRC_MASK;
690 return;
691 case gpio_reg_cmd_source_1:
692 set->cmd_source_1 = data & ASPEED_CMD_SRC_MASK;
693 return;
694 case gpio_reg_data_read:
695 /* Read only register */
696 return;
697 case gpio_reg_input_mask:
698 /*
699 * feeds into interrupt generation
700 * 0: read from data value reg will be updated
701 * 1: read from data value reg will not be updated
702 */
703 set->input_mask = data & props->input;
704 break;
705 default:
706 qemu_log_mask(LOG_GUEST_ERROR, "%s: no setter for offset 0x%"
707 HWADDR_PRIx"\n", __func__, offset);
708 return;
709 }
710 aspeed_gpio_update(s, set, set->data_value);
711 return;
712 }
713
714 static int get_set_idx(AspeedGPIOState *s, const char *group, int *group_idx)
715 {
716 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
717 int set_idx, g_idx = *group_idx;
718
719 for (set_idx = 0; set_idx < agc->nr_gpio_sets; set_idx++) {
720 const GPIOSetProperties *set_props = &agc->props[set_idx];
721 for (g_idx = 0; g_idx < ASPEED_GROUPS_PER_SET; g_idx++) {
722 if (!strncmp(group, set_props->group_label[g_idx], strlen(group))) {
723 *group_idx = g_idx;
724 return set_idx;
725 }
726 }
727 }
728 return -1;
729 }
730
731 static void aspeed_gpio_get_pin(Object *obj, Visitor *v, const char *name,
732 void *opaque, Error **errp)
733 {
734 int pin = 0xfff;
735 bool level = true;
736 char group[4];
737 AspeedGPIOState *s = ASPEED_GPIO(obj);
738 int set_idx, group_idx = 0;
739
740 if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
741 /* 1.8V gpio */
742 if (sscanf(name, "gpio%3[18A-E]%1d", group, &pin) != 2) {
743 error_setg(errp, "%s: error reading %s", __func__, name);
744 return;
745 }
746 }
747 set_idx = get_set_idx(s, group, &group_idx);
748 if (set_idx == -1) {
749 error_setg(errp, "%s: invalid group %s", __func__, group);
750 return;
751 }
752 pin = pin + group_idx * GPIOS_PER_GROUP;
753 level = aspeed_gpio_get_pin_level(s, set_idx, pin);
754 visit_type_bool(v, name, &level, errp);
755 }
756
757 static void aspeed_gpio_set_pin(Object *obj, Visitor *v, const char *name,
758 void *opaque, Error **errp)
759 {
760 Error *local_err = NULL;
761 bool level;
762 int pin = 0xfff;
763 char group[4];
764 AspeedGPIOState *s = ASPEED_GPIO(obj);
765 int set_idx, group_idx = 0;
766
767 visit_type_bool(v, name, &level, &local_err);
768 if (local_err) {
769 error_propagate(errp, local_err);
770 return;
771 }
772 if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
773 /* 1.8V gpio */
774 if (sscanf(name, "gpio%3[18A-E]%1d", group, &pin) != 2) {
775 error_setg(errp, "%s: error reading %s", __func__, name);
776 return;
777 }
778 }
779 set_idx = get_set_idx(s, group, &group_idx);
780 if (set_idx == -1) {
781 error_setg(errp, "%s: invalid group %s", __func__, group);
782 return;
783 }
784 pin = pin + group_idx * GPIOS_PER_GROUP;
785 aspeed_gpio_set_pin_level(s, set_idx, pin, level);
786 }
787
788 /****************** Setup functions ******************/
789 static const GPIOSetProperties ast2400_set_props[] = {
790 [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
791 [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
792 [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
793 [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
794 [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
795 [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
796 [6] = {0x0000000f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} },
797 };
798
799 static const GPIOSetProperties ast2500_set_props[] = {
800 [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
801 [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
802 [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
803 [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
804 [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
805 [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
806 [6] = {0xffffff0f, 0x0fffff0f, {"Y", "Z", "AA", "AB"} },
807 [7] = {0x000000ff, 0x000000ff, {"AC"} },
808 };
809
810 static GPIOSetProperties ast2600_3_6v_set_props[] = {
811 [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
812 [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
813 [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
814 [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
815 [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
816 [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
817 [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} },
818 };
819
820 static GPIOSetProperties ast2600_1_8v_set_props[] = {
821 [0] = {0xffffffff, 0xffffffff, {"18A", "18B", "18C", "18D"} },
822 [1] = {0x0000000f, 0x0000000f, {"18E"} },
823 };
824
825 static const MemoryRegionOps aspeed_gpio_ops = {
826 .read = aspeed_gpio_read,
827 .write = aspeed_gpio_write,
828 .endianness = DEVICE_LITTLE_ENDIAN,
829 .valid.min_access_size = 4,
830 .valid.max_access_size = 4,
831 };
832
833 static void aspeed_gpio_reset(DeviceState *dev)
834 {
835 AspeedGPIOState *s = ASPEED_GPIO(dev);
836
837 /* TODO: respect the reset tolerance registers */
838 memset(s->sets, 0, sizeof(s->sets));
839 }
840
841 static void aspeed_gpio_realize(DeviceState *dev, Error **errp)
842 {
843 AspeedGPIOState *s = ASPEED_GPIO(dev);
844 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
845 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
846 int pin;
847
848 /* Interrupt parent line */
849 sysbus_init_irq(sbd, &s->irq);
850
851 /* Individual GPIOs */
852 for (pin = 0; pin < agc->nr_gpio_pins; pin++) {
853 sysbus_init_irq(sbd, &s->gpios[pin]);
854 }
855
856 memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s,
857 TYPE_ASPEED_GPIO, GPIO_MAX_MEM_SIZE);
858
859 sysbus_init_mmio(sbd, &s->iomem);
860 }
861
862 static void aspeed_gpio_init(Object *obj)
863 {
864 AspeedGPIOState *s = ASPEED_GPIO(obj);
865 AspeedGPIOClass *agc = ASPEED_GPIO_GET_CLASS(s);
866 int pin;
867
868 for (pin = 0; pin < agc->nr_gpio_pins; pin++) {
869 char *name;
870 int set_idx = pin / GPIOS_PER_SET;
871 int pin_idx = aspeed_adjust_pin(s, pin) - (set_idx * GPIOS_PER_SET);
872 int group_idx = pin_idx >> GPIO_GROUP_SHIFT;
873 const GPIOSetProperties *props = &agc->props[set_idx];
874
875 name = g_strdup_printf("gpio%s%d", props->group_label[group_idx],
876 pin_idx % GPIOS_PER_GROUP);
877 object_property_add(obj, name, "bool", aspeed_gpio_get_pin,
878 aspeed_gpio_set_pin, NULL, NULL, NULL);
879 g_free(name);
880 }
881 }
882
883 static const VMStateDescription vmstate_gpio_regs = {
884 .name = TYPE_ASPEED_GPIO"/regs",
885 .version_id = 1,
886 .minimum_version_id = 1,
887 .fields = (VMStateField[]) {
888 VMSTATE_UINT32(data_value, GPIOSets),
889 VMSTATE_UINT32(data_read, GPIOSets),
890 VMSTATE_UINT32(direction, GPIOSets),
891 VMSTATE_UINT32(int_enable, GPIOSets),
892 VMSTATE_UINT32(int_sens_0, GPIOSets),
893 VMSTATE_UINT32(int_sens_1, GPIOSets),
894 VMSTATE_UINT32(int_sens_2, GPIOSets),
895 VMSTATE_UINT32(int_status, GPIOSets),
896 VMSTATE_UINT32(reset_tol, GPIOSets),
897 VMSTATE_UINT32(cmd_source_0, GPIOSets),
898 VMSTATE_UINT32(cmd_source_1, GPIOSets),
899 VMSTATE_UINT32(debounce_1, GPIOSets),
900 VMSTATE_UINT32(debounce_2, GPIOSets),
901 VMSTATE_UINT32(input_mask, GPIOSets),
902 VMSTATE_END_OF_LIST(),
903 }
904 };
905
906 static const VMStateDescription vmstate_aspeed_gpio = {
907 .name = TYPE_ASPEED_GPIO,
908 .version_id = 1,
909 .minimum_version_id = 1,
910 .fields = (VMStateField[]) {
911 VMSTATE_STRUCT_ARRAY(sets, AspeedGPIOState, ASPEED_GPIO_MAX_NR_SETS,
912 1, vmstate_gpio_regs, GPIOSets),
913 VMSTATE_UINT32_ARRAY(debounce_regs, AspeedGPIOState,
914 ASPEED_GPIO_NR_DEBOUNCE_REGS),
915 VMSTATE_END_OF_LIST(),
916 }
917 };
918
919 static void aspeed_gpio_class_init(ObjectClass *klass, void *data)
920 {
921 DeviceClass *dc = DEVICE_CLASS(klass);
922
923 dc->realize = aspeed_gpio_realize;
924 dc->reset = aspeed_gpio_reset;
925 dc->desc = "Aspeed GPIO Controller";
926 dc->vmsd = &vmstate_aspeed_gpio;
927 }
928
929 static void aspeed_gpio_ast2400_class_init(ObjectClass *klass, void *data)
930 {
931 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
932
933 agc->props = ast2400_set_props;
934 agc->nr_gpio_pins = 216;
935 agc->nr_gpio_sets = 7;
936 agc->gap = 196;
937 agc->reg_table = aspeed_3_6v_gpios;
938 }
939
940 static void aspeed_gpio_2500_class_init(ObjectClass *klass, void *data)
941 {
942 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
943
944 agc->props = ast2500_set_props;
945 agc->nr_gpio_pins = 228;
946 agc->nr_gpio_sets = 8;
947 agc->gap = 220;
948 agc->reg_table = aspeed_3_6v_gpios;
949 }
950
951 static void aspeed_gpio_ast2600_3_6v_class_init(ObjectClass *klass, void *data)
952 {
953 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
954
955 agc->props = ast2600_3_6v_set_props;
956 agc->nr_gpio_pins = 208;
957 agc->nr_gpio_sets = 7;
958 agc->reg_table = aspeed_3_6v_gpios;
959 }
960
961 static void aspeed_gpio_ast2600_1_8v_class_init(ObjectClass *klass, void *data)
962 {
963 AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
964
965 agc->props = ast2600_1_8v_set_props;
966 agc->nr_gpio_pins = 36;
967 agc->nr_gpio_sets = 2;
968 agc->reg_table = aspeed_1_8v_gpios;
969 }
970
971 static const TypeInfo aspeed_gpio_info = {
972 .name = TYPE_ASPEED_GPIO,
973 .parent = TYPE_SYS_BUS_DEVICE,
974 .instance_size = sizeof(AspeedGPIOState),
975 .class_size = sizeof(AspeedGPIOClass),
976 .class_init = aspeed_gpio_class_init,
977 .abstract = true,
978 };
979
980 static const TypeInfo aspeed_gpio_ast2400_info = {
981 .name = TYPE_ASPEED_GPIO "-ast2400",
982 .parent = TYPE_ASPEED_GPIO,
983 .class_init = aspeed_gpio_ast2400_class_init,
984 .instance_init = aspeed_gpio_init,
985 };
986
987 static const TypeInfo aspeed_gpio_ast2500_info = {
988 .name = TYPE_ASPEED_GPIO "-ast2500",
989 .parent = TYPE_ASPEED_GPIO,
990 .class_init = aspeed_gpio_2500_class_init,
991 .instance_init = aspeed_gpio_init,
992 };
993
994 static const TypeInfo aspeed_gpio_ast2600_3_6v_info = {
995 .name = TYPE_ASPEED_GPIO "-ast2600",
996 .parent = TYPE_ASPEED_GPIO,
997 .class_init = aspeed_gpio_ast2600_3_6v_class_init,
998 .instance_init = aspeed_gpio_init,
999 };
1000
1001 static const TypeInfo aspeed_gpio_ast2600_1_8v_info = {
1002 .name = TYPE_ASPEED_GPIO "-ast2600-1_8v",
1003 .parent = TYPE_ASPEED_GPIO,
1004 .class_init = aspeed_gpio_ast2600_1_8v_class_init,
1005 .instance_init = aspeed_gpio_init,
1006 };
1007
1008 static void aspeed_gpio_register_types(void)
1009 {
1010 type_register_static(&aspeed_gpio_info);
1011 type_register_static(&aspeed_gpio_ast2400_info);
1012 type_register_static(&aspeed_gpio_ast2500_info);
1013 type_register_static(&aspeed_gpio_ast2600_3_6v_info);
1014 type_register_static(&aspeed_gpio_ast2600_1_8v_info);
1015 }
1016
1017 type_init(aspeed_gpio_register_types);
Random patches