6 #include "exec/exec-all.h"
7 #include "exec/cpu_ldst.h"
11 #endif /* DEBUG_REMAP */
13 #include "exec/user/abitypes.h"
15 #include "exec/user/thunk.h"
16 #include "syscall_defs.h"
17 #include "target_syscall.h"
18 #include "exec/gdbstub.h"
20 /* This is the size of the host kernel's sigset_t, needed where we make
21 * direct system calls that take a sigset_t pointer and a size.
23 #define SIGSET_T_SIZE (_NSIG / 8)
25 /* This struct is used to hold certain information about the image.
26 * Basically, it replicates in user space what would be certain
27 * task_struct fields in the kernel
39 abi_ulong start_stack
;
40 abi_ulong stack_limit
;
42 abi_ulong code_offset
;
43 abi_ulong data_offset
;
48 abi_ulong arg_strings
;
49 abi_ulong env_strings
;
50 abi_ulong file_string
;
55 /* The fields below are used in FDPIC mode. */
56 abi_ulong loadmap_addr
;
59 abi_ulong pt_dynamic_addr
;
60 abi_ulong interpreter_loadmap_addr
;
61 abi_ulong interpreter_pt_dynamic_addr
;
62 struct image_info
*other_info
;
70 /* Information about the current linux thread */
71 struct vm86_saved_state
{
72 uint32_t eax
; /* return code */
82 uint16_t cs
, ss
, ds
, es
, fs
, gs
;
86 #if defined(TARGET_ARM) && defined(TARGET_ABI32)
88 #include "nwfpe/fpa11.h"
91 #define MAX_SIGQUEUE_SIZE 1024
93 struct emulated_sigtable
{
94 int pending
; /* true if signal is pending */
95 target_siginfo_t info
;
98 /* NOTE: we force a big alignment so that the stack stored after is
100 typedef struct TaskState
{
101 pid_t ts_tid
; /* tid (or pid) of this task */
109 #if defined(TARGET_I386) && !defined(TARGET_X86_64)
110 abi_ulong target_v86
;
111 struct vm86_saved_state vm86_saved_regs
;
112 struct target_vm86plus_struct vm86plus
;
116 abi_ulong child_tidptr
;
120 #if defined(TARGET_ARM) || defined(TARGET_M68K)
121 /* Extra fields for semihosted binaries. */
123 abi_ulong heap_limit
;
125 abi_ulong stack_base
;
126 int used
; /* non zero if used */
127 struct image_info
*info
;
128 struct linux_binprm
*bprm
;
130 struct emulated_sigtable sync_signal
;
131 struct emulated_sigtable sigtab
[TARGET_NSIG
];
132 /* This thread's signal mask, as requested by the guest program.
133 * The actual signal mask of this thread may differ:
134 * + we don't let SIGSEGV and SIGBUS be blocked while running guest code
135 * + sometimes we block all signals to avoid races
137 sigset_t signal_mask
;
138 /* The signal mask imposed by a guest sigsuspend syscall, if we are
139 * currently in the middle of such a syscall
141 sigset_t sigsuspend_mask
;
142 /* Nonzero if we're leaving a sigsuspend and sigsuspend_mask is valid. */
145 /* Nonzero if process_pending_signals() needs to do something (either
146 * handle a pending signal or unblock signals).
147 * This flag is written from a signal handler so should be accessed via
148 * the atomic_read() and atomic_set() functions. (It is not accessed
149 * from multiple threads.)
153 /* This thread's sigaltstack, if it has one */
154 struct target_sigaltstack sigaltstack_used
;
155 } __attribute__((aligned(16))) TaskState
;
157 extern char *exec_path
;
158 void init_task_state(TaskState
*ts
);
159 void task_settid(TaskState
*);
160 void stop_all_tasks(void);
161 extern const char *qemu_uname_release
;
162 extern unsigned long mmap_min_addr
;
164 /* ??? See if we can avoid exposing so much of the loader internals. */
166 /* Read a good amount of data initially, to hopefully get all the
167 program headers loaded. */
168 #define BPRM_BUF_SIZE 1024
171 * This structure is used to hold the arguments that are
172 * used when loading binaries.
174 struct linux_binprm
{
175 char buf
[BPRM_BUF_SIZE
] __attribute__((aligned
));
182 char * filename
; /* Name of binary */
183 int (*core_dump
)(int, const CPUArchState
*); /* coredump routine */
186 void do_init_thread(struct target_pt_regs
*regs
, struct image_info
*infop
);
187 abi_ulong
loader_build_argptr(int envc
, int argc
, abi_ulong sp
,
188 abi_ulong stringp
, int push_ptr
);
189 int loader_exec(int fdexec
, const char *filename
, char **argv
, char **envp
,
190 struct target_pt_regs
* regs
, struct image_info
*infop
,
191 struct linux_binprm
*);
193 /* Returns true if the image uses the FDPIC ABI. If this is the case,
194 * we have to provide some information (loadmap, pt_dynamic_info) such
195 * that the program can be relocated adequately. This is also useful
196 * when handling signals.
198 int info_is_fdpic(struct image_info
*info
);
200 uint32_t get_elf_eflags(int fd
);
201 int load_elf_binary(struct linux_binprm
*bprm
, struct image_info
*info
);
202 int load_flt_binary(struct linux_binprm
*bprm
, struct image_info
*info
);
204 abi_long
memcpy_to_target(abi_ulong dest
, const void *src
,
206 void target_set_brk(abi_ulong new_brk
);
207 abi_long
do_brk(abi_ulong new_brk
);
208 void syscall_init(void);
209 abi_long
do_syscall(void *cpu_env
, int num
, abi_long arg1
,
210 abi_long arg2
, abi_long arg3
, abi_long arg4
,
211 abi_long arg5
, abi_long arg6
, abi_long arg7
,
213 void gemu_log(const char *fmt
, ...) GCC_FMT_ATTR(1, 2);
214 extern __thread CPUState
*thread_cpu
;
215 void cpu_loop(CPUArchState
*env
);
216 const char *target_strerror(int err
);
217 int get_osversion(void);
218 void init_qemu_uname_release(void);
219 void fork_start(void);
220 void fork_end(int child
);
222 /* Creates the initial guest address space in the host memory space using
223 * the given host start address hint and size. The guest_start parameter
224 * specifies the start address of the guest space. guest_base will be the
225 * difference between the host start address computed by this function and
226 * guest_start. If fixed is specified, then the mapped address space must
227 * start at host_start. The real start address of the mapped memory space is
228 * returned or -1 if there was an error.
230 unsigned long init_guest_space(unsigned long host_start
,
231 unsigned long host_size
,
232 unsigned long guest_start
,
235 #include "qemu/log.h"
241 * @int number: number of system call to make
242 * ...: arguments to the system call
244 * Call a system call if guest signal not pending.
245 * This has the same API as the libc syscall() function, except that it
246 * may return -1 with errno == TARGET_ERESTARTSYS if a signal was pending.
248 * Returns: the system call result, or -1 with an error code in errno
249 * (Errnos are host errnos; we rely on TARGET_ERESTARTSYS not clashing
250 * with any of the host errno values.)
253 /* A guide to using safe_syscall() to handle interactions between guest
254 * syscalls and guest signals:
256 * Guest syscalls come in two flavours:
258 * (1) Non-interruptible syscalls
260 * These are guest syscalls that never get interrupted by signals and
261 * so never return EINTR. They can be implemented straightforwardly in
262 * QEMU: just make sure that if the implementation code has to make any
263 * blocking calls that those calls are retried if they return EINTR.
264 * It's also OK to implement these with safe_syscall, though it will be
265 * a little less efficient if a signal is delivered at the 'wrong' moment.
267 * Some non-interruptible syscalls need to be handled using block_signals()
268 * to block signals for the duration of the syscall. This mainly applies
269 * to code which needs to modify the data structures used by the
270 * host_signal_handler() function and the functions it calls, including
271 * all syscalls which change the thread's signal mask.
273 * (2) Interruptible syscalls
275 * These are guest syscalls that can be interrupted by signals and
276 * for which we need to either return EINTR or arrange for the guest
277 * syscall to be restarted. This category includes both syscalls which
278 * always restart (and in the kernel return -ERESTARTNOINTR), ones
279 * which only restart if there is no handler (kernel returns -ERESTARTNOHAND
280 * or -ERESTART_RESTARTBLOCK), and the most common kind which restart
281 * if the handler was registered with SA_RESTART (kernel returns
282 * -ERESTARTSYS). System calls which are only interruptible in some
283 * situations (like 'open') also need to be handled this way.
285 * Here it is important that the host syscall is made
286 * via this safe_syscall() function, and *not* via the host libc.
287 * If the host libc is used then the implementation will appear to work
288 * most of the time, but there will be a race condition where a
289 * signal could arrive just before we make the host syscall inside libc,
290 * and then then guest syscall will not correctly be interrupted.
291 * Instead the implementation of the guest syscall can use the safe_syscall
292 * function but otherwise just return the result or errno in the usual
293 * way; the main loop code will take care of restarting the syscall
296 * (If the implementation needs to make multiple host syscalls this is
297 * OK; any which might really block must be via safe_syscall(); for those
298 * which are only technically blocking (ie which we know in practice won't
299 * stay in the host kernel indefinitely) it's OK to use libc if necessary.
300 * You must be able to cope with backing out correctly if some safe_syscall
301 * you make in the implementation returns either -TARGET_ERESTARTSYS or
304 * block_signals() cannot be used for interruptible syscalls.
307 * How and why the safe_syscall implementation works:
309 * The basic setup is that we make the host syscall via a known
310 * section of host native assembly. If a signal occurs, our signal
311 * handler checks the interrupted host PC against the addresse of that
312 * known section. If the PC is before or at the address of the syscall
313 * instruction then we change the PC to point at a "return
314 * -TARGET_ERESTARTSYS" code path instead, and then exit the signal handler
315 * (causing the safe_syscall() call to immediately return that value).
316 * Then in the main.c loop if we see this magic return value we adjust
317 * the guest PC to wind it back to before the system call, and invoke
318 * the guest signal handler as usual.
320 * This winding-back will happen in two cases:
321 * (1) signal came in just before we took the host syscall (a race);
322 * in this case we'll take the guest signal and have another go
323 * at the syscall afterwards, and this is indistinguishable for the
324 * guest from the timing having been different such that the guest
325 * signal really did win the race
326 * (2) signal came in while the host syscall was blocking, and the
327 * host kernel decided the syscall should be restarted;
328 * in this case we want to restart the guest syscall also, and so
329 * rewinding is the right thing. (Note that "restart" semantics mean
330 * "first call the signal handler, then reattempt the syscall".)
331 * The other situation to consider is when a signal came in while the
332 * host syscall was blocking, and the host kernel decided that the syscall
333 * should not be restarted; in this case QEMU's host signal handler will
334 * be invoked with the PC pointing just after the syscall instruction,
335 * with registers indicating an EINTR return; the special code in the
336 * handler will not kick in, and we will return EINTR to the guest as
339 * Notice that we can leave the host kernel to make the decision for
340 * us about whether to do a restart of the syscall or not; we do not
341 * need to check SA_RESTART flags in QEMU or distinguish the various
342 * kinds of restartability.
344 #ifdef HAVE_SAFE_SYSCALL
345 /* The core part of this function is implemented in assembly */
346 extern long safe_syscall_base(int *pending
, long number
, ...);
348 #define safe_syscall(...) \
351 int *psp_ = &((TaskState *)thread_cpu->opaque)->signal_pending; \
352 ret_ = safe_syscall_base(psp_, __VA_ARGS__); \
353 if (is_error(ret_)) { \
362 /* Fallback for architectures which don't yet provide a safe-syscall assembly
363 * fragment; note that this is racy!
364 * This should go away when all host architectures have been updated.
366 #define safe_syscall syscall
371 int host_to_target_waitstatus(int status
);
374 void print_syscall(int num
,
375 abi_long arg1
, abi_long arg2
, abi_long arg3
,
376 abi_long arg4
, abi_long arg5
, abi_long arg6
);
377 void print_syscall_ret(int num
, abi_long arg1
);
379 * print_taken_signal:
380 * @target_signum: target signal being taken
381 * @tinfo: target_siginfo_t which will be passed to the guest for the signal
383 * Print strace output indicating that this signal is being taken by the guest,
384 * in a format similar to:
385 * --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
387 void print_taken_signal(int target_signum
, const target_siginfo_t
*tinfo
);
388 extern int do_strace
;
391 void process_pending_signals(CPUArchState
*cpu_env
);
392 void signal_init(void);
393 int queue_signal(CPUArchState
*env
, int sig
, int si_type
,
394 target_siginfo_t
*info
);
395 void host_to_target_siginfo(target_siginfo_t
*tinfo
, const siginfo_t
*info
);
396 void target_to_host_siginfo(siginfo_t
*info
, const target_siginfo_t
*tinfo
);
397 int target_to_host_signal(int sig
);
398 int host_to_target_signal(int sig
);
399 long do_sigreturn(CPUArchState
*env
);
400 long do_rt_sigreturn(CPUArchState
*env
);
401 abi_long
do_sigaltstack(abi_ulong uss_addr
, abi_ulong uoss_addr
, abi_ulong sp
);
402 int do_sigprocmask(int how
, const sigset_t
*set
, sigset_t
*oldset
);
403 abi_long
do_swapcontext(CPUArchState
*env
, abi_ulong uold_ctx
,
404 abi_ulong unew_ctx
, abi_long ctx_size
);
406 * block_signals: block all signals while handling this guest syscall
408 * Block all signals, and arrange that the signal mask is returned to
409 * its correct value for the guest before we resume execution of guest code.
410 * If this function returns non-zero, then the caller should immediately
411 * return -TARGET_ERESTARTSYS to the main loop, which will take the pending
412 * signal and restart execution of the syscall.
413 * If block_signals() returns zero, then the caller can continue with
414 * emulation of the system call knowing that no signals can be taken
415 * (and therefore that no race conditions will result).
416 * This should only be called once, because if it is called a second time
417 * it will always return non-zero. (Think of it like a mutex that can't
418 * be recursively locked.)
419 * Signals will be unblocked again by process_pending_signals().
421 * Return value: non-zero if there was a pending signal, zero if not.
423 int block_signals(void); /* Returns non zero if signal pending */
427 void save_v86_state(CPUX86State
*env
);
428 void handle_vm86_trap(CPUX86State
*env
, int trapno
);
429 void handle_vm86_fault(CPUX86State
*env
);
430 int do_vm86(CPUX86State
*env
, long subfunction
, abi_ulong v86_addr
);
431 #elif defined(TARGET_SPARC64)
432 void sparc64_set_context(CPUSPARCState
*env
);
433 void sparc64_get_context(CPUSPARCState
*env
);
437 int target_mprotect(abi_ulong start
, abi_ulong len
, int prot
);
438 abi_long
target_mmap(abi_ulong start
, abi_ulong len
, int prot
,
439 int flags
, int fd
, abi_ulong offset
);
440 int target_munmap(abi_ulong start
, abi_ulong len
);
441 abi_long
target_mremap(abi_ulong old_addr
, abi_ulong old_size
,
442 abi_ulong new_size
, unsigned long flags
,
444 extern unsigned long last_brk
;
445 extern abi_ulong mmap_next_start
;
446 abi_ulong
mmap_find_vma(abi_ulong
, abi_ulong
, abi_ulong
);
447 void mmap_fork_start(void);
448 void mmap_fork_end(int child
);
451 extern unsigned long guest_stack_size
;
455 #define VERIFY_READ 0
456 #define VERIFY_WRITE 1 /* implies read access */
458 static inline int access_ok(int type
, abi_ulong addr
, abi_ulong size
)
460 return guest_addr_valid(addr
) &&
461 (size
== 0 || guest_addr_valid(addr
+ size
- 1)) &&
462 page_check_range((target_ulong
)addr
, size
,
463 (type
== VERIFY_READ
) ? PAGE_READ
: (PAGE_READ
| PAGE_WRITE
)) == 0;
466 /* NOTE __get_user and __put_user use host pointers and don't check access.
467 These are usually used to access struct data members once the struct has
468 been locked - usually with lock_user_struct. */
472 * - Use __builtin_choose_expr to avoid type promotion from ?:,
473 * - Invalid sizes result in a compile time error stemming from
474 * the fact that abort has no parameters.
475 * - It's easier to use the endian-specific unaligned load/store
476 * functions than host-endian unaligned load/store plus tswapN.
477 * - The pragmas are necessary only to silence a clang false-positive
478 * warning: see https://bugs.llvm.org/show_bug.cgi?id=39113 .
479 * - gcc has bugs in its _Pragma() support in some versions, eg
480 * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 -- so we only
481 * include the warning-suppression pragmas for clang
483 #if defined(__clang__) && __has_warning("-Waddress-of-packed-member")
484 #define PRAGMA_DISABLE_PACKED_WARNING \
485 _Pragma("GCC diagnostic push"); \
486 _Pragma("GCC diagnostic ignored \"-Waddress-of-packed-member\"")
488 #define PRAGMA_REENABLE_PACKED_WARNING \
489 _Pragma("GCC diagnostic pop")
492 #define PRAGMA_DISABLE_PACKED_WARNING
493 #define PRAGMA_REENABLE_PACKED_WARNING
496 #define __put_user_e(x, hptr, e) \
498 PRAGMA_DISABLE_PACKED_WARNING; \
499 (__builtin_choose_expr(sizeof(*(hptr)) == 1, stb_p, \
500 __builtin_choose_expr(sizeof(*(hptr)) == 2, stw_##e##_p, \
501 __builtin_choose_expr(sizeof(*(hptr)) == 4, stl_##e##_p, \
502 __builtin_choose_expr(sizeof(*(hptr)) == 8, stq_##e##_p, abort)))) \
503 ((hptr), (x)), (void)0); \
504 PRAGMA_REENABLE_PACKED_WARNING; \
507 #define __get_user_e(x, hptr, e) \
509 PRAGMA_DISABLE_PACKED_WARNING; \
510 ((x) = (typeof(*hptr))( \
511 __builtin_choose_expr(sizeof(*(hptr)) == 1, ldub_p, \
512 __builtin_choose_expr(sizeof(*(hptr)) == 2, lduw_##e##_p, \
513 __builtin_choose_expr(sizeof(*(hptr)) == 4, ldl_##e##_p, \
514 __builtin_choose_expr(sizeof(*(hptr)) == 8, ldq_##e##_p, abort)))) \
516 PRAGMA_REENABLE_PACKED_WARNING; \
520 #ifdef TARGET_WORDS_BIGENDIAN
521 # define __put_user(x, hptr) __put_user_e(x, hptr, be)
522 # define __get_user(x, hptr) __get_user_e(x, hptr, be)
524 # define __put_user(x, hptr) __put_user_e(x, hptr, le)
525 # define __get_user(x, hptr) __get_user_e(x, hptr, le)
528 /* put_user()/get_user() take a guest address and check access */
529 /* These are usually used to access an atomic data type, such as an int,
530 * that has been passed by address. These internally perform locking
531 * and unlocking on the data type.
533 #define put_user(x, gaddr, target_type) \
535 abi_ulong __gaddr = (gaddr); \
536 target_type *__hptr; \
537 abi_long __ret = 0; \
538 if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \
539 __put_user((x), __hptr); \
540 unlock_user(__hptr, __gaddr, sizeof(target_type)); \
542 __ret = -TARGET_EFAULT; \
546 #define get_user(x, gaddr, target_type) \
548 abi_ulong __gaddr = (gaddr); \
549 target_type *__hptr; \
550 abi_long __ret = 0; \
551 if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \
552 __get_user((x), __hptr); \
553 unlock_user(__hptr, __gaddr, 0); \
555 /* avoid warning */ \
557 __ret = -TARGET_EFAULT; \
562 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong)
563 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long)
564 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t)
565 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t)
566 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t)
567 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t)
568 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t)
569 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t)
570 #define put_user_u8(x, gaddr) put_user((x), (gaddr), uint8_t)
571 #define put_user_s8(x, gaddr) put_user((x), (gaddr), int8_t)
573 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong)
574 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long)
575 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t)
576 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t)
577 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t)
578 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t)
579 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t)
580 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t)
581 #define get_user_u8(x, gaddr) get_user((x), (gaddr), uint8_t)
582 #define get_user_s8(x, gaddr) get_user((x), (gaddr), int8_t)
584 /* copy_from_user() and copy_to_user() are usually used to copy data
585 * buffers between the target and host. These internally perform
586 * locking/unlocking of the memory.
588 abi_long
copy_from_user(void *hptr
, abi_ulong gaddr
, size_t len
);
589 abi_long
copy_to_user(abi_ulong gaddr
, void *hptr
, size_t len
);
591 /* Functions for accessing guest memory. The tget and tput functions
592 read/write single values, byteswapping as necessary. The lock_user function
593 gets a pointer to a contiguous area of guest memory, but does not perform
594 any byteswapping. lock_user may return either a pointer to the guest
595 memory, or a temporary buffer. */
597 /* Lock an area of guest memory into the host. If copy is true then the
598 host area will have the same contents as the guest. */
599 static inline void *lock_user(int type
, abi_ulong guest_addr
, long len
, int copy
)
601 if (!access_ok(type
, guest_addr
, len
))
606 addr
= g_malloc(len
);
608 memcpy(addr
, g2h(guest_addr
), len
);
610 memset(addr
, 0, len
);
614 return g2h(guest_addr
);
618 /* Unlock an area of guest memory. The first LEN bytes must be
619 flushed back to guest memory. host_ptr = NULL is explicitly
620 allowed and does nothing. */
621 static inline void unlock_user(void *host_ptr
, abi_ulong guest_addr
,
628 if (host_ptr
== g2h(guest_addr
))
631 memcpy(g2h(guest_addr
), host_ptr
, len
);
636 /* Return the length of a string in target memory or -TARGET_EFAULT if
638 abi_long
target_strlen(abi_ulong gaddr
);
640 /* Like lock_user but for null terminated strings. */
641 static inline void *lock_user_string(abi_ulong guest_addr
)
644 len
= target_strlen(guest_addr
);
647 return lock_user(VERIFY_READ
, guest_addr
, (long)(len
+ 1), 1);
650 /* Helper macros for locking/unlocking a target struct. */
651 #define lock_user_struct(type, host_ptr, guest_addr, copy) \
652 (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy))
653 #define unlock_user_struct(host_ptr, guest_addr, copy) \
654 unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
658 static inline int is_error(abi_long ret
)
660 return (abi_ulong
)ret
>= (abi_ulong
)(-4096);
664 * preexit_cleanup: housekeeping before the guest exits
667 * code: the exit code
669 void preexit_cleanup(CPUArchState
*env
, int code
);
671 /* Include target-specific struct and function definitions;
672 * they may need access to the target-independent structures
673 * above, so include them last.
675 #include "target_cpu.h"
676 #include "target_structs.h"