2 * Virtio Network Device
4 * Copyright IBM, Corp. 2007
7 * Anthony Liguori <aliguori@us.ibm.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
14 #ifndef _QEMU_VIRTIO_NET_H
15 #define _QEMU_VIRTIO_NET_H
23 /* from Linux's virtio_net.h */
25 /* The ID for virtio_net */
26 #define VIRTIO_ID_NET 1
28 /* The feature bitmap for virtio net */
29 #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
30 #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
31 #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
32 #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
33 #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
34 #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
35 #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
36 #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
37 #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
38 #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
39 #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
40 #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
41 #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
42 #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
43 #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
44 #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
45 #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
46 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
48 #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
50 #define TX_TIMER_INTERVAL 150000 /* 150 us */
52 /* Maximum packet size we can receive from tap device: header + 64k */
53 #define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
55 struct virtio_net_config
57 /* The config defining mac address (6 bytes) */
59 /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
61 } __attribute__((packed
));
63 /* This is the first element of the scatter-gather list. If you don't
64 * specify GSO or CSUM features, you can simply ignore the header. */
67 #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
69 #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
70 #define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
71 #define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
72 #define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
73 #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
81 /* This is the version of the header to use when the MRG_RXBUF
82 * feature has been negotiated. */
83 struct virtio_net_hdr_mrg_rxbuf
85 struct virtio_net_hdr hdr
;
86 uint16_t num_buffers
; /* Number of merged rx buffers */
90 * Control virtqueue data structures
92 * The control virtqueue expects a header in the first sg entry
93 * and an ack/status response in the last entry. Data for the
94 * command goes in between.
96 struct virtio_net_ctrl_hdr
{
101 typedef uint8_t virtio_net_ctrl_ack
;
103 #define VIRTIO_NET_OK 0
104 #define VIRTIO_NET_ERR 1
107 * Control the RX mode, ie. promisucous, allmulti, etc...
108 * All commands require an "out" sg entry containing a 1 byte
109 * state value, zero = disable, non-zero = enable. Commands
110 * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
111 * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
113 #define VIRTIO_NET_CTRL_RX_MODE 0
114 #define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
115 #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
116 #define VIRTIO_NET_CTRL_RX_MODE_ALLUNI 2
117 #define VIRTIO_NET_CTRL_RX_MODE_NOMULTI 3
118 #define VIRTIO_NET_CTRL_RX_MODE_NOUNI 4
119 #define VIRTIO_NET_CTRL_RX_MODE_NOBCAST 5
122 * Control the MAC filter table.
124 * The MAC filter table is managed by the hypervisor, the guest should
125 * assume the size is infinite. Filtering should be considered
126 * non-perfect, ie. based on hypervisor resources, the guest may
127 * received packets from sources not specified in the filter list.
129 * In addition to the class/cmd header, the TABLE_SET command requires
130 * two out scatterlists. Each contains a 4 byte count of entries followed
131 * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
132 * first sg list contains unicast addresses, the second is for multicast.
133 * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
136 struct virtio_net_ctrl_mac
{
138 uint8_t macs
[][ETH_ALEN
];
140 #define VIRTIO_NET_CTRL_MAC 1
141 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
144 * Control VLAN filtering
146 * The VLAN filter table is controlled via a simple ADD/DEL interface.
147 * VLAN IDs not added may be filterd by the hypervisor. Del is the
148 * opposite of add. Both commands expect an out entry containing a 2
149 * byte VLAN ID. VLAN filterting is available with the
150 * VIRTIO_NET_F_CTRL_VLAN feature bit.
152 #define VIRTIO_NET_CTRL_VLAN 2
153 #define VIRTIO_NET_CTRL_VLAN_ADD 0
154 #define VIRTIO_NET_CTRL_VLAN_DEL 1