2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ
= 0x1,
56 BDRV_REQ_ZERO_WRITE
= 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BlockDriverCompletionFunc
*cb
,
85 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
86 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
87 int64_t sector_num
, int nb_sectors
);
89 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
90 bool is_write
, double elapsed_time
, uint64_t *wait
);
91 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
92 double elapsed_time
, uint64_t *wait
);
93 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
94 bool is_write
, int64_t *wait
);
96 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
97 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
99 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
100 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
102 /* If non-zero, use only whitelisted block drivers */
103 static int use_bdrv_whitelist
;
106 static int is_windows_drive_prefix(const char *filename
)
108 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
109 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
113 int is_windows_drive(const char *filename
)
115 if (is_windows_drive_prefix(filename
) &&
118 if (strstart(filename
, "\\\\.\\", NULL
) ||
119 strstart(filename
, "//./", NULL
))
125 /* throttling disk I/O limits */
126 void bdrv_io_limits_disable(BlockDriverState
*bs
)
128 bs
->io_limits_enabled
= false;
130 while (qemu_co_queue_next(&bs
->throttled_reqs
));
132 if (bs
->block_timer
) {
133 qemu_del_timer(bs
->block_timer
);
134 qemu_free_timer(bs
->block_timer
);
135 bs
->block_timer
= NULL
;
142 static void bdrv_block_timer(void *opaque
)
144 BlockDriverState
*bs
= opaque
;
146 qemu_co_queue_next(&bs
->throttled_reqs
);
149 void bdrv_io_limits_enable(BlockDriverState
*bs
)
151 qemu_co_queue_init(&bs
->throttled_reqs
);
152 bs
->block_timer
= qemu_new_timer_ns(vm_clock
, bdrv_block_timer
, bs
);
153 bs
->io_limits_enabled
= true;
156 bool bdrv_io_limits_enabled(BlockDriverState
*bs
)
158 BlockIOLimit
*io_limits
= &bs
->io_limits
;
159 return io_limits
->bps
[BLOCK_IO_LIMIT_READ
]
160 || io_limits
->bps
[BLOCK_IO_LIMIT_WRITE
]
161 || io_limits
->bps
[BLOCK_IO_LIMIT_TOTAL
]
162 || io_limits
->iops
[BLOCK_IO_LIMIT_READ
]
163 || io_limits
->iops
[BLOCK_IO_LIMIT_WRITE
]
164 || io_limits
->iops
[BLOCK_IO_LIMIT_TOTAL
];
167 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
168 bool is_write
, int nb_sectors
)
170 int64_t wait_time
= -1;
172 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
173 qemu_co_queue_wait(&bs
->throttled_reqs
);
176 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
177 * throttled requests will not be dequeued until the current request is
178 * allowed to be serviced. So if the current request still exceeds the
179 * limits, it will be inserted to the head. All requests followed it will
180 * be still in throttled_reqs queue.
183 while (bdrv_exceed_io_limits(bs
, nb_sectors
, is_write
, &wait_time
)) {
184 qemu_mod_timer(bs
->block_timer
,
185 wait_time
+ qemu_get_clock_ns(vm_clock
));
186 qemu_co_queue_wait_insert_head(&bs
->throttled_reqs
);
189 qemu_co_queue_next(&bs
->throttled_reqs
);
192 /* check if the path starts with "<protocol>:" */
193 static int path_has_protocol(const char *path
)
198 if (is_windows_drive(path
) ||
199 is_windows_drive_prefix(path
)) {
202 p
= path
+ strcspn(path
, ":/\\");
204 p
= path
+ strcspn(path
, ":/");
210 int path_is_absolute(const char *path
)
213 /* specific case for names like: "\\.\d:" */
214 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
217 return (*path
== '/' || *path
== '\\');
219 return (*path
== '/');
223 /* if filename is absolute, just copy it to dest. Otherwise, build a
224 path to it by considering it is relative to base_path. URL are
226 void path_combine(char *dest
, int dest_size
,
227 const char *base_path
,
228 const char *filename
)
235 if (path_is_absolute(filename
)) {
236 pstrcpy(dest
, dest_size
, filename
);
238 p
= strchr(base_path
, ':');
243 p1
= strrchr(base_path
, '/');
247 p2
= strrchr(base_path
, '\\');
259 if (len
> dest_size
- 1)
261 memcpy(dest
, base_path
, len
);
263 pstrcat(dest
, dest_size
, filename
);
267 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
269 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
270 pstrcpy(dest
, sz
, bs
->backing_file
);
272 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
276 void bdrv_register(BlockDriver
*bdrv
)
278 /* Block drivers without coroutine functions need emulation */
279 if (!bdrv
->bdrv_co_readv
) {
280 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
281 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
283 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
284 * the block driver lacks aio we need to emulate that too.
286 if (!bdrv
->bdrv_aio_readv
) {
287 /* add AIO emulation layer */
288 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
289 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
293 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
296 /* create a new block device (by default it is empty) */
297 BlockDriverState
*bdrv_new(const char *device_name
)
299 BlockDriverState
*bs
;
301 bs
= g_malloc0(sizeof(BlockDriverState
));
302 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
303 if (device_name
[0] != '\0') {
304 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
306 bdrv_iostatus_disable(bs
);
307 notifier_list_init(&bs
->close_notifiers
);
308 notifier_with_return_list_init(&bs
->before_write_notifiers
);
313 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
315 notifier_list_add(&bs
->close_notifiers
, notify
);
318 BlockDriver
*bdrv_find_format(const char *format_name
)
321 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
322 if (!strcmp(drv1
->format_name
, format_name
)) {
329 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
331 static const char *whitelist_rw
[] = {
332 CONFIG_BDRV_RW_WHITELIST
334 static const char *whitelist_ro
[] = {
335 CONFIG_BDRV_RO_WHITELIST
339 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
340 return 1; /* no whitelist, anything goes */
343 for (p
= whitelist_rw
; *p
; p
++) {
344 if (!strcmp(drv
->format_name
, *p
)) {
349 for (p
= whitelist_ro
; *p
; p
++) {
350 if (!strcmp(drv
->format_name
, *p
)) {
358 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
361 BlockDriver
*drv
= bdrv_find_format(format_name
);
362 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
365 typedef struct CreateCo
{
368 QEMUOptionParameter
*options
;
372 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
374 CreateCo
*cco
= opaque
;
377 cco
->ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
);
380 int bdrv_create(BlockDriver
*drv
, const char* filename
,
381 QEMUOptionParameter
*options
)
388 .filename
= g_strdup(filename
),
393 if (!drv
->bdrv_create
) {
398 if (qemu_in_coroutine()) {
399 /* Fast-path if already in coroutine context */
400 bdrv_create_co_entry(&cco
);
402 co
= qemu_coroutine_create(bdrv_create_co_entry
);
403 qemu_coroutine_enter(co
, &cco
);
404 while (cco
.ret
== NOT_DONE
) {
412 g_free(cco
.filename
);
416 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
)
420 drv
= bdrv_find_protocol(filename
);
425 return bdrv_create(drv
, filename
, options
);
429 * Create a uniquely-named empty temporary file.
430 * Return 0 upon success, otherwise a negative errno value.
432 int get_tmp_filename(char *filename
, int size
)
435 char temp_dir
[MAX_PATH
];
436 /* GetTempFileName requires that its output buffer (4th param)
437 have length MAX_PATH or greater. */
438 assert(size
>= MAX_PATH
);
439 return (GetTempPath(MAX_PATH
, temp_dir
)
440 && GetTempFileName(temp_dir
, "qem", 0, filename
)
441 ? 0 : -GetLastError());
445 tmpdir
= getenv("TMPDIR");
448 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
451 fd
= mkstemp(filename
);
455 if (close(fd
) != 0) {
464 * Detect host devices. By convention, /dev/cdrom[N] is always
465 * recognized as a host CDROM.
467 static BlockDriver
*find_hdev_driver(const char *filename
)
469 int score_max
= 0, score
;
470 BlockDriver
*drv
= NULL
, *d
;
472 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
473 if (d
->bdrv_probe_device
) {
474 score
= d
->bdrv_probe_device(filename
);
475 if (score
> score_max
) {
485 BlockDriver
*bdrv_find_protocol(const char *filename
)
492 /* TODO Drivers without bdrv_file_open must be specified explicitly */
495 * XXX(hch): we really should not let host device detection
496 * override an explicit protocol specification, but moving this
497 * later breaks access to device names with colons in them.
498 * Thanks to the brain-dead persistent naming schemes on udev-
499 * based Linux systems those actually are quite common.
501 drv1
= find_hdev_driver(filename
);
506 if (!path_has_protocol(filename
)) {
507 return bdrv_find_format("file");
509 p
= strchr(filename
, ':');
512 if (len
> sizeof(protocol
) - 1)
513 len
= sizeof(protocol
) - 1;
514 memcpy(protocol
, filename
, len
);
515 protocol
[len
] = '\0';
516 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
517 if (drv1
->protocol_name
&&
518 !strcmp(drv1
->protocol_name
, protocol
)) {
525 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
528 int score
, score_max
;
529 BlockDriver
*drv1
, *drv
;
533 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
534 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
535 drv
= bdrv_find_format("raw");
543 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
551 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
552 if (drv1
->bdrv_probe
) {
553 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
554 if (score
> score_max
) {
568 * Set the current 'total_sectors' value
570 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
572 BlockDriver
*drv
= bs
->drv
;
574 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
578 /* query actual device if possible, otherwise just trust the hint */
579 if (drv
->bdrv_getlength
) {
580 int64_t length
= drv
->bdrv_getlength(bs
);
584 hint
= length
>> BDRV_SECTOR_BITS
;
587 bs
->total_sectors
= hint
;
592 * Set open flags for a given discard mode
594 * Return 0 on success, -1 if the discard mode was invalid.
596 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
598 *flags
&= ~BDRV_O_UNMAP
;
600 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
602 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
603 *flags
|= BDRV_O_UNMAP
;
612 * Set open flags for a given cache mode
614 * Return 0 on success, -1 if the cache mode was invalid.
616 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
618 *flags
&= ~BDRV_O_CACHE_MASK
;
620 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
621 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
622 } else if (!strcmp(mode
, "directsync")) {
623 *flags
|= BDRV_O_NOCACHE
;
624 } else if (!strcmp(mode
, "writeback")) {
625 *flags
|= BDRV_O_CACHE_WB
;
626 } else if (!strcmp(mode
, "unsafe")) {
627 *flags
|= BDRV_O_CACHE_WB
;
628 *flags
|= BDRV_O_NO_FLUSH
;
629 } else if (!strcmp(mode
, "writethrough")) {
630 /* this is the default */
639 * The copy-on-read flag is actually a reference count so multiple users may
640 * use the feature without worrying about clobbering its previous state.
641 * Copy-on-read stays enabled until all users have called to disable it.
643 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
648 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
650 assert(bs
->copy_on_read
> 0);
654 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
656 int open_flags
= flags
| BDRV_O_CACHE_WB
;
659 * Clear flags that are internal to the block layer before opening the
662 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
665 * Snapshots should be writable.
667 if (bs
->is_temporary
) {
668 open_flags
|= BDRV_O_RDWR
;
675 * Common part for opening disk images and files
677 * Removes all processed options from *options.
679 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
680 QDict
*options
, int flags
, BlockDriver
*drv
)
683 const char *filename
;
686 assert(bs
->file
== NULL
);
687 assert(options
!= NULL
&& bs
->options
!= options
);
690 filename
= file
->filename
;
692 filename
= qdict_get_try_str(options
, "filename");
695 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
697 /* bdrv_open() with directly using a protocol as drv. This layer is already
698 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
699 * and return immediately. */
700 if (file
!= NULL
&& drv
->bdrv_file_open
) {
705 bs
->open_flags
= flags
;
706 bs
->buffer_alignment
= 512;
707 open_flags
= bdrv_open_flags(bs
, flags
);
708 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
710 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
714 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
715 if (!bs
->read_only
&& (flags
& BDRV_O_COPY_ON_READ
)) {
716 bdrv_enable_copy_on_read(bs
);
719 if (filename
!= NULL
) {
720 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
722 bs
->filename
[0] = '\0';
726 bs
->opaque
= g_malloc0(drv
->instance_size
);
728 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
730 /* Open the image, either directly or using a protocol */
731 if (drv
->bdrv_file_open
) {
732 assert(file
== NULL
);
733 assert(drv
->bdrv_parse_filename
|| filename
!= NULL
);
734 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
);
737 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Can't use '%s' as a "
738 "block driver for the protocol level",
743 assert(file
!= NULL
);
745 ret
= drv
->bdrv_open(bs
, options
, open_flags
);
752 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
758 if (bs
->is_temporary
) {
759 assert(filename
!= NULL
);
774 * Opens a file using a protocol (file, host_device, nbd, ...)
776 * options is a QDict of options to pass to the block drivers, or NULL for an
777 * empty set of options. The reference to the QDict belongs to the block layer
778 * after the call (even on failure), so if the caller intends to reuse the
779 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
781 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
,
782 QDict
*options
, int flags
)
784 BlockDriverState
*bs
;
789 /* NULL means an empty set of options */
790 if (options
== NULL
) {
791 options
= qdict_new();
795 bs
->options
= options
;
796 options
= qdict_clone_shallow(options
);
798 /* Fetch the file name from the options QDict if necessary */
800 filename
= qdict_get_try_str(options
, "filename");
801 } else if (filename
&& !qdict_haskey(options
, "filename")) {
802 qdict_put(options
, "filename", qstring_from_str(filename
));
804 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Can't specify 'file' and "
805 "'filename' options at the same time");
810 /* Find the right block driver */
811 drvname
= qdict_get_try_str(options
, "driver");
813 drv
= bdrv_find_whitelisted_format(drvname
, !(flags
& BDRV_O_RDWR
));
814 qdict_del(options
, "driver");
815 } else if (filename
) {
816 drv
= bdrv_find_protocol(filename
);
818 qerror_report(ERROR_CLASS_GENERIC_ERROR
,
819 "Must specify either driver or file");
828 /* Parse the filename and open it */
829 if (drv
->bdrv_parse_filename
&& filename
) {
830 Error
*local_err
= NULL
;
831 drv
->bdrv_parse_filename(filename
, options
, &local_err
);
832 if (error_is_set(&local_err
)) {
833 qerror_report_err(local_err
);
834 error_free(local_err
);
838 qdict_del(options
, "filename");
839 } else if (!drv
->bdrv_parse_filename
&& !filename
) {
840 qerror_report(ERROR_CLASS_GENERIC_ERROR
,
841 "The '%s' block driver requires a file name",
847 ret
= bdrv_open_common(bs
, NULL
, options
, flags
, drv
);
852 /* Check if any unknown options were used */
853 if (qdict_size(options
) != 0) {
854 const QDictEntry
*entry
= qdict_first(options
);
855 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Block protocol '%s' doesn't "
856 "support the option '%s'",
857 drv
->format_name
, entry
->key
);
870 QDECREF(bs
->options
);
877 * Opens the backing file for a BlockDriverState if not yet open
879 * options is a QDict of options to pass to the block drivers, or NULL for an
880 * empty set of options. The reference to the QDict is transferred to this
881 * function (even on failure), so if the caller intends to reuse the dictionary,
882 * it needs to use QINCREF() before calling bdrv_file_open.
884 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
)
886 char backing_filename
[PATH_MAX
];
888 BlockDriver
*back_drv
= NULL
;
890 if (bs
->backing_hd
!= NULL
) {
895 /* NULL means an empty set of options */
896 if (options
== NULL
) {
897 options
= qdict_new();
900 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
901 if (qdict_haskey(options
, "file.filename")) {
902 backing_filename
[0] = '\0';
903 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
908 bs
->backing_hd
= bdrv_new("");
909 bdrv_get_full_backing_filename(bs
, backing_filename
,
910 sizeof(backing_filename
));
912 if (bs
->backing_format
[0] != '\0') {
913 back_drv
= bdrv_find_format(bs
->backing_format
);
916 /* backing files always opened read-only */
917 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
);
919 ret
= bdrv_open(bs
->backing_hd
,
920 *backing_filename
? backing_filename
: NULL
, options
,
921 back_flags
, back_drv
);
923 bdrv_delete(bs
->backing_hd
);
924 bs
->backing_hd
= NULL
;
925 bs
->open_flags
|= BDRV_O_NO_BACKING
;
931 static void extract_subqdict(QDict
*src
, QDict
**dst
, const char *start
)
933 const QDictEntry
*entry
, *next
;
937 entry
= qdict_first(src
);
939 while (entry
!= NULL
) {
940 next
= qdict_next(src
, entry
);
941 if (strstart(entry
->key
, start
, &p
)) {
942 qobject_incref(entry
->value
);
943 qdict_put_obj(*dst
, p
, entry
->value
);
944 qdict_del(src
, entry
->key
);
951 * Opens a disk image (raw, qcow2, vmdk, ...)
953 * options is a QDict of options to pass to the block drivers, or NULL for an
954 * empty set of options. The reference to the QDict belongs to the block layer
955 * after the call (even on failure), so if the caller intends to reuse the
956 * dictionary, it needs to use QINCREF() before calling bdrv_open.
958 int bdrv_open(BlockDriverState
*bs
, const char *filename
, QDict
*options
,
959 int flags
, BlockDriver
*drv
)
962 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
963 char tmp_filename
[PATH_MAX
+ 1];
964 BlockDriverState
*file
= NULL
;
965 QDict
*file_options
= NULL
;
967 /* NULL means an empty set of options */
968 if (options
== NULL
) {
969 options
= qdict_new();
972 bs
->options
= options
;
973 options
= qdict_clone_shallow(options
);
975 /* For snapshot=on, create a temporary qcow2 overlay */
976 if (flags
& BDRV_O_SNAPSHOT
) {
977 BlockDriverState
*bs1
;
979 BlockDriver
*bdrv_qcow2
;
980 QEMUOptionParameter
*create_options
;
981 char backing_filename
[PATH_MAX
];
983 if (qdict_size(options
) != 0) {
984 error_report("Can't use snapshot=on with driver-specific options");
988 assert(filename
!= NULL
);
990 /* if snapshot, we create a temporary backing file and open it
991 instead of opening 'filename' directly */
993 /* if there is a backing file, use it */
995 ret
= bdrv_open(bs1
, filename
, NULL
, 0, drv
);
1000 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
1004 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
1009 /* Real path is meaningless for protocols */
1010 if (path_has_protocol(filename
)) {
1011 snprintf(backing_filename
, sizeof(backing_filename
),
1013 } else if (!realpath(filename
, backing_filename
)) {
1018 bdrv_qcow2
= bdrv_find_format("qcow2");
1019 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1022 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1023 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FILE
,
1026 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FMT
,
1030 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
);
1031 free_option_parameters(create_options
);
1036 filename
= tmp_filename
;
1038 bs
->is_temporary
= 1;
1041 /* Open image file without format layer */
1042 if (flags
& BDRV_O_RDWR
) {
1043 flags
|= BDRV_O_ALLOW_RDWR
;
1046 extract_subqdict(options
, &file_options
, "file.");
1048 ret
= bdrv_file_open(&file
, filename
, file_options
,
1049 bdrv_open_flags(bs
, flags
| BDRV_O_UNMAP
));
1054 /* Find the right image format driver */
1056 ret
= find_image_format(file
, filename
, &drv
);
1060 goto unlink_and_fail
;
1063 /* Open the image */
1064 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
);
1066 goto unlink_and_fail
;
1069 if (bs
->file
!= file
) {
1074 /* If there is a backing file, use it */
1075 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1076 QDict
*backing_options
;
1078 extract_subqdict(options
, &backing_options
, "backing.");
1079 ret
= bdrv_open_backing_file(bs
, backing_options
);
1081 goto close_and_fail
;
1085 /* Check if any unknown options were used */
1086 if (qdict_size(options
) != 0) {
1087 const QDictEntry
*entry
= qdict_first(options
);
1088 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Block format '%s' used by "
1089 "device '%s' doesn't support the option '%s'",
1090 drv
->format_name
, bs
->device_name
, entry
->key
);
1093 goto close_and_fail
;
1097 if (!bdrv_key_required(bs
)) {
1098 bdrv_dev_change_media_cb(bs
, true);
1101 /* throttling disk I/O limits */
1102 if (bs
->io_limits_enabled
) {
1103 bdrv_io_limits_enable(bs
);
1112 if (bs
->is_temporary
) {
1116 QDECREF(bs
->options
);
1127 typedef struct BlockReopenQueueEntry
{
1129 BDRVReopenState state
;
1130 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1131 } BlockReopenQueueEntry
;
1134 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1135 * reopen of multiple devices.
1137 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1138 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1139 * be created and initialized. This newly created BlockReopenQueue should be
1140 * passed back in for subsequent calls that are intended to be of the same
1143 * bs is the BlockDriverState to add to the reopen queue.
1145 * flags contains the open flags for the associated bs
1147 * returns a pointer to bs_queue, which is either the newly allocated
1148 * bs_queue, or the existing bs_queue being used.
1151 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1152 BlockDriverState
*bs
, int flags
)
1156 BlockReopenQueueEntry
*bs_entry
;
1157 if (bs_queue
== NULL
) {
1158 bs_queue
= g_new0(BlockReopenQueue
, 1);
1159 QSIMPLEQ_INIT(bs_queue
);
1163 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
1166 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1167 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1169 bs_entry
->state
.bs
= bs
;
1170 bs_entry
->state
.flags
= flags
;
1176 * Reopen multiple BlockDriverStates atomically & transactionally.
1178 * The queue passed in (bs_queue) must have been built up previous
1179 * via bdrv_reopen_queue().
1181 * Reopens all BDS specified in the queue, with the appropriate
1182 * flags. All devices are prepared for reopen, and failure of any
1183 * device will cause all device changes to be abandonded, and intermediate
1186 * If all devices prepare successfully, then the changes are committed
1190 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1193 BlockReopenQueueEntry
*bs_entry
, *next
;
1194 Error
*local_err
= NULL
;
1196 assert(bs_queue
!= NULL
);
1200 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1201 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1202 error_propagate(errp
, local_err
);
1205 bs_entry
->prepared
= true;
1208 /* If we reach this point, we have success and just need to apply the
1211 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1212 bdrv_reopen_commit(&bs_entry
->state
);
1218 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1219 if (ret
&& bs_entry
->prepared
) {
1220 bdrv_reopen_abort(&bs_entry
->state
);
1229 /* Reopen a single BlockDriverState with the specified flags. */
1230 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1233 Error
*local_err
= NULL
;
1234 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1236 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1237 if (local_err
!= NULL
) {
1238 error_propagate(errp
, local_err
);
1245 * Prepares a BlockDriverState for reopen. All changes are staged in the
1246 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1247 * the block driver layer .bdrv_reopen_prepare()
1249 * bs is the BlockDriverState to reopen
1250 * flags are the new open flags
1251 * queue is the reopen queue
1253 * Returns 0 on success, non-zero on error. On error errp will be set
1256 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1257 * It is the responsibility of the caller to then call the abort() or
1258 * commit() for any other BDS that have been left in a prepare() state
1261 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1265 Error
*local_err
= NULL
;
1268 assert(reopen_state
!= NULL
);
1269 assert(reopen_state
->bs
->drv
!= NULL
);
1270 drv
= reopen_state
->bs
->drv
;
1272 /* if we are to stay read-only, do not allow permission change
1274 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1275 reopen_state
->flags
& BDRV_O_RDWR
) {
1276 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1277 reopen_state
->bs
->device_name
);
1282 ret
= bdrv_flush(reopen_state
->bs
);
1284 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1289 if (drv
->bdrv_reopen_prepare
) {
1290 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1292 if (local_err
!= NULL
) {
1293 error_propagate(errp
, local_err
);
1295 error_setg(errp
, "failed while preparing to reopen image '%s'",
1296 reopen_state
->bs
->filename
);
1301 /* It is currently mandatory to have a bdrv_reopen_prepare()
1302 * handler for each supported drv. */
1303 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1304 drv
->format_name
, reopen_state
->bs
->device_name
,
1305 "reopening of file");
1317 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1318 * makes them final by swapping the staging BlockDriverState contents into
1319 * the active BlockDriverState contents.
1321 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1325 assert(reopen_state
!= NULL
);
1326 drv
= reopen_state
->bs
->drv
;
1327 assert(drv
!= NULL
);
1329 /* If there are any driver level actions to take */
1330 if (drv
->bdrv_reopen_commit
) {
1331 drv
->bdrv_reopen_commit(reopen_state
);
1334 /* set BDS specific flags now */
1335 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1336 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1338 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1342 * Abort the reopen, and delete and free the staged changes in
1345 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1349 assert(reopen_state
!= NULL
);
1350 drv
= reopen_state
->bs
->drv
;
1351 assert(drv
!= NULL
);
1353 if (drv
->bdrv_reopen_abort
) {
1354 drv
->bdrv_reopen_abort(reopen_state
);
1359 void bdrv_close(BlockDriverState
*bs
)
1362 block_job_cancel_sync(bs
->job
);
1364 bdrv_drain_all(); /* complete I/O */
1366 bdrv_drain_all(); /* in case flush left pending I/O */
1367 notifier_list_notify(&bs
->close_notifiers
, bs
);
1370 if (bs
->backing_hd
) {
1371 bdrv_delete(bs
->backing_hd
);
1372 bs
->backing_hd
= NULL
;
1374 bs
->drv
->bdrv_close(bs
);
1377 if (bs
->is_temporary
) {
1378 unlink(bs
->filename
);
1383 bs
->copy_on_read
= 0;
1384 bs
->backing_file
[0] = '\0';
1385 bs
->backing_format
[0] = '\0';
1386 bs
->total_sectors
= 0;
1391 QDECREF(bs
->options
);
1394 if (bs
->file
!= NULL
) {
1395 bdrv_delete(bs
->file
);
1400 bdrv_dev_change_media_cb(bs
, false);
1402 /*throttling disk I/O limits*/
1403 if (bs
->io_limits_enabled
) {
1404 bdrv_io_limits_disable(bs
);
1408 void bdrv_close_all(void)
1410 BlockDriverState
*bs
;
1412 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1418 * Wait for pending requests to complete across all BlockDriverStates
1420 * This function does not flush data to disk, use bdrv_flush_all() for that
1421 * after calling this function.
1423 * Note that completion of an asynchronous I/O operation can trigger any
1424 * number of other I/O operations on other devices---for example a coroutine
1425 * can be arbitrarily complex and a constant flow of I/O can come until the
1426 * coroutine is complete. Because of this, it is not possible to have a
1427 * function to drain a single device's I/O queue.
1429 void bdrv_drain_all(void)
1431 BlockDriverState
*bs
;
1435 busy
= qemu_aio_wait();
1437 /* FIXME: We do not have timer support here, so this is effectively
1440 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1441 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
1442 qemu_co_queue_restart_all(&bs
->throttled_reqs
);
1448 /* If requests are still pending there is a bug somewhere */
1449 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1450 assert(QLIST_EMPTY(&bs
->tracked_requests
));
1451 assert(qemu_co_queue_empty(&bs
->throttled_reqs
));
1455 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1456 Also, NULL terminate the device_name to prevent double remove */
1457 void bdrv_make_anon(BlockDriverState
*bs
)
1459 if (bs
->device_name
[0] != '\0') {
1460 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1462 bs
->device_name
[0] = '\0';
1465 static void bdrv_rebind(BlockDriverState
*bs
)
1467 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1468 bs
->drv
->bdrv_rebind(bs
);
1472 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1473 BlockDriverState
*bs_src
)
1475 /* move some fields that need to stay attached to the device */
1476 bs_dest
->open_flags
= bs_src
->open_flags
;
1479 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1480 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1481 bs_dest
->dev
= bs_src
->dev
;
1482 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1483 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1485 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1487 /* i/o timing parameters */
1488 bs_dest
->slice_start
= bs_src
->slice_start
;
1489 bs_dest
->slice_end
= bs_src
->slice_end
;
1490 bs_dest
->slice_submitted
= bs_src
->slice_submitted
;
1491 bs_dest
->io_limits
= bs_src
->io_limits
;
1492 bs_dest
->throttled_reqs
= bs_src
->throttled_reqs
;
1493 bs_dest
->block_timer
= bs_src
->block_timer
;
1494 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1497 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1498 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1501 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1502 bs_dest
->iostatus
= bs_src
->iostatus
;
1505 bs_dest
->dirty_bitmap
= bs_src
->dirty_bitmap
;
1508 bs_dest
->in_use
= bs_src
->in_use
;
1509 bs_dest
->job
= bs_src
->job
;
1511 /* keep the same entry in bdrv_states */
1512 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1513 bs_src
->device_name
);
1514 bs_dest
->list
= bs_src
->list
;
1518 * Swap bs contents for two image chains while they are live,
1519 * while keeping required fields on the BlockDriverState that is
1520 * actually attached to a device.
1522 * This will modify the BlockDriverState fields, and swap contents
1523 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1525 * bs_new is required to be anonymous.
1527 * This function does not create any image files.
1529 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1531 BlockDriverState tmp
;
1533 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1534 assert(bs_new
->device_name
[0] == '\0');
1535 assert(bs_new
->dirty_bitmap
== NULL
);
1536 assert(bs_new
->job
== NULL
);
1537 assert(bs_new
->dev
== NULL
);
1538 assert(bs_new
->in_use
== 0);
1539 assert(bs_new
->io_limits_enabled
== false);
1540 assert(bs_new
->block_timer
== NULL
);
1546 /* there are some fields that should not be swapped, move them back */
1547 bdrv_move_feature_fields(&tmp
, bs_old
);
1548 bdrv_move_feature_fields(bs_old
, bs_new
);
1549 bdrv_move_feature_fields(bs_new
, &tmp
);
1551 /* bs_new shouldn't be in bdrv_states even after the swap! */
1552 assert(bs_new
->device_name
[0] == '\0');
1554 /* Check a few fields that should remain attached to the device */
1555 assert(bs_new
->dev
== NULL
);
1556 assert(bs_new
->job
== NULL
);
1557 assert(bs_new
->in_use
== 0);
1558 assert(bs_new
->io_limits_enabled
== false);
1559 assert(bs_new
->block_timer
== NULL
);
1561 bdrv_rebind(bs_new
);
1562 bdrv_rebind(bs_old
);
1566 * Add new bs contents at the top of an image chain while the chain is
1567 * live, while keeping required fields on the top layer.
1569 * This will modify the BlockDriverState fields, and swap contents
1570 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1572 * bs_new is required to be anonymous.
1574 * This function does not create any image files.
1576 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1578 bdrv_swap(bs_new
, bs_top
);
1580 /* The contents of 'tmp' will become bs_top, as we are
1581 * swapping bs_new and bs_top contents. */
1582 bs_top
->backing_hd
= bs_new
;
1583 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1584 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1586 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1587 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1590 void bdrv_delete(BlockDriverState
*bs
)
1594 assert(!bs
->in_use
);
1596 /* remove from list, if necessary */
1604 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1605 /* TODO change to DeviceState *dev when all users are qdevified */
1611 bdrv_iostatus_reset(bs
);
1615 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1616 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1618 if (bdrv_attach_dev(bs
, dev
) < 0) {
1623 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1624 /* TODO change to DeviceState *dev when all users are qdevified */
1626 assert(bs
->dev
== dev
);
1629 bs
->dev_opaque
= NULL
;
1630 bs
->buffer_alignment
= 512;
1633 /* TODO change to return DeviceState * when all users are qdevified */
1634 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1639 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1643 bs
->dev_opaque
= opaque
;
1646 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1647 enum MonitorEvent ev
,
1648 BlockErrorAction action
, bool is_read
)
1651 const char *action_str
;
1654 case BDRV_ACTION_REPORT
:
1655 action_str
= "report";
1657 case BDRV_ACTION_IGNORE
:
1658 action_str
= "ignore";
1660 case BDRV_ACTION_STOP
:
1661 action_str
= "stop";
1667 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1670 is_read
? "read" : "write");
1671 monitor_protocol_event(ev
, data
);
1673 qobject_decref(data
);
1676 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1680 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1681 bdrv_get_device_name(bs
), ejected
);
1682 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1684 qobject_decref(data
);
1687 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1689 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1690 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1691 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1692 if (tray_was_closed
) {
1694 bdrv_emit_qmp_eject_event(bs
, true);
1698 bdrv_emit_qmp_eject_event(bs
, false);
1703 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1705 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1708 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1710 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1711 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1715 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1717 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1718 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1723 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1725 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1726 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1730 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1732 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1733 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1739 * Run consistency checks on an image
1741 * Returns 0 if the check could be completed (it doesn't mean that the image is
1742 * free of errors) or -errno when an internal error occurred. The results of the
1743 * check are stored in res.
1745 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1747 if (bs
->drv
->bdrv_check
== NULL
) {
1751 memset(res
, 0, sizeof(*res
));
1752 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1755 #define COMMIT_BUF_SECTORS 2048
1757 /* commit COW file into the raw image */
1758 int bdrv_commit(BlockDriverState
*bs
)
1760 BlockDriver
*drv
= bs
->drv
;
1761 int64_t sector
, total_sectors
;
1762 int n
, ro
, open_flags
;
1765 char filename
[PATH_MAX
];
1770 if (!bs
->backing_hd
) {
1774 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1778 ro
= bs
->backing_hd
->read_only
;
1779 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1780 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1781 open_flags
= bs
->backing_hd
->open_flags
;
1784 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1789 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1790 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1792 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1793 if (bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
)) {
1795 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1800 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1807 if (drv
->bdrv_make_empty
) {
1808 ret
= drv
->bdrv_make_empty(bs
);
1813 * Make sure all data we wrote to the backing device is actually
1817 bdrv_flush(bs
->backing_hd
);
1823 /* ignoring error return here */
1824 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1830 int bdrv_commit_all(void)
1832 BlockDriverState
*bs
;
1834 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1835 if (bs
->drv
&& bs
->backing_hd
) {
1836 int ret
= bdrv_commit(bs
);
1846 * Remove an active request from the tracked requests list
1848 * This function should be called when a tracked request is completing.
1850 static void tracked_request_end(BdrvTrackedRequest
*req
)
1852 QLIST_REMOVE(req
, list
);
1853 qemu_co_queue_restart_all(&req
->wait_queue
);
1857 * Add an active request to the tracked requests list
1859 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1860 BlockDriverState
*bs
,
1862 int nb_sectors
, bool is_write
)
1864 *req
= (BdrvTrackedRequest
){
1866 .sector_num
= sector_num
,
1867 .nb_sectors
= nb_sectors
,
1868 .is_write
= is_write
,
1869 .co
= qemu_coroutine_self(),
1872 qemu_co_queue_init(&req
->wait_queue
);
1874 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
1878 * Round a region to cluster boundaries
1880 void bdrv_round_to_clusters(BlockDriverState
*bs
,
1881 int64_t sector_num
, int nb_sectors
,
1882 int64_t *cluster_sector_num
,
1883 int *cluster_nb_sectors
)
1885 BlockDriverInfo bdi
;
1887 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
1888 *cluster_sector_num
= sector_num
;
1889 *cluster_nb_sectors
= nb_sectors
;
1891 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
1892 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
1893 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
1898 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
1899 int64_t sector_num
, int nb_sectors
) {
1901 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
1905 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
1911 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
1912 int64_t sector_num
, int nb_sectors
)
1914 BdrvTrackedRequest
*req
;
1915 int64_t cluster_sector_num
;
1916 int cluster_nb_sectors
;
1919 /* If we touch the same cluster it counts as an overlap. This guarantees
1920 * that allocating writes will be serialized and not race with each other
1921 * for the same cluster. For example, in copy-on-read it ensures that the
1922 * CoR read and write operations are atomic and guest writes cannot
1923 * interleave between them.
1925 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
1926 &cluster_sector_num
, &cluster_nb_sectors
);
1930 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
1931 if (tracked_request_overlaps(req
, cluster_sector_num
,
1932 cluster_nb_sectors
)) {
1933 /* Hitting this means there was a reentrant request, for
1934 * example, a block driver issuing nested requests. This must
1935 * never happen since it means deadlock.
1937 assert(qemu_coroutine_self() != req
->co
);
1939 qemu_co_queue_wait(&req
->wait_queue
);
1950 * -EINVAL - backing format specified, but no file
1951 * -ENOSPC - can't update the backing file because no space is left in the
1953 * -ENOTSUP - format driver doesn't support changing the backing file
1955 int bdrv_change_backing_file(BlockDriverState
*bs
,
1956 const char *backing_file
, const char *backing_fmt
)
1958 BlockDriver
*drv
= bs
->drv
;
1961 /* Backing file format doesn't make sense without a backing file */
1962 if (backing_fmt
&& !backing_file
) {
1966 if (drv
->bdrv_change_backing_file
!= NULL
) {
1967 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
1973 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
1974 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
1980 * Finds the image layer in the chain that has 'bs' as its backing file.
1982 * active is the current topmost image.
1984 * Returns NULL if bs is not found in active's image chain,
1985 * or if active == bs.
1987 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
1988 BlockDriverState
*bs
)
1990 BlockDriverState
*overlay
= NULL
;
1991 BlockDriverState
*intermediate
;
1993 assert(active
!= NULL
);
1996 /* if bs is the same as active, then by definition it has no overlay
2002 intermediate
= active
;
2003 while (intermediate
->backing_hd
) {
2004 if (intermediate
->backing_hd
== bs
) {
2005 overlay
= intermediate
;
2008 intermediate
= intermediate
->backing_hd
;
2014 typedef struct BlkIntermediateStates
{
2015 BlockDriverState
*bs
;
2016 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2017 } BlkIntermediateStates
;
2021 * Drops images above 'base' up to and including 'top', and sets the image
2022 * above 'top' to have base as its backing file.
2024 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2025 * information in 'bs' can be properly updated.
2027 * E.g., this will convert the following chain:
2028 * bottom <- base <- intermediate <- top <- active
2032 * bottom <- base <- active
2034 * It is allowed for bottom==base, in which case it converts:
2036 * base <- intermediate <- top <- active
2043 * if active == top, that is considered an error
2046 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2047 BlockDriverState
*base
)
2049 BlockDriverState
*intermediate
;
2050 BlockDriverState
*base_bs
= NULL
;
2051 BlockDriverState
*new_top_bs
= NULL
;
2052 BlkIntermediateStates
*intermediate_state
, *next
;
2055 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2056 QSIMPLEQ_INIT(&states_to_delete
);
2058 if (!top
->drv
|| !base
->drv
) {
2062 new_top_bs
= bdrv_find_overlay(active
, top
);
2064 if (new_top_bs
== NULL
) {
2065 /* we could not find the image above 'top', this is an error */
2069 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2070 * to do, no intermediate images */
2071 if (new_top_bs
->backing_hd
== base
) {
2078 /* now we will go down through the list, and add each BDS we find
2079 * into our deletion queue, until we hit the 'base'
2081 while (intermediate
) {
2082 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2083 intermediate_state
->bs
= intermediate
;
2084 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2086 if (intermediate
->backing_hd
== base
) {
2087 base_bs
= intermediate
->backing_hd
;
2090 intermediate
= intermediate
->backing_hd
;
2092 if (base_bs
== NULL
) {
2093 /* something went wrong, we did not end at the base. safely
2094 * unravel everything, and exit with error */
2098 /* success - we can delete the intermediate states, and link top->base */
2099 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2100 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2104 new_top_bs
->backing_hd
= base_bs
;
2107 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2108 /* so that bdrv_close() does not recursively close the chain */
2109 intermediate_state
->bs
->backing_hd
= NULL
;
2110 bdrv_delete(intermediate_state
->bs
);
2115 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2116 g_free(intermediate_state
);
2122 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2127 if (!bdrv_is_inserted(bs
))
2133 len
= bdrv_getlength(bs
);
2138 if ((offset
> len
) || (len
- offset
< size
))
2144 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2147 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2148 nb_sectors
* BDRV_SECTOR_SIZE
);
2151 typedef struct RwCo
{
2152 BlockDriverState
*bs
;
2160 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2162 RwCo
*rwco
= opaque
;
2164 if (!rwco
->is_write
) {
2165 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
2166 rwco
->nb_sectors
, rwco
->qiov
, 0);
2168 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
2169 rwco
->nb_sectors
, rwco
->qiov
, 0);
2174 * Process a vectored synchronous request using coroutines
2176 static int bdrv_rwv_co(BlockDriverState
*bs
, int64_t sector_num
,
2177 QEMUIOVector
*qiov
, bool is_write
)
2182 .sector_num
= sector_num
,
2183 .nb_sectors
= qiov
->size
>> BDRV_SECTOR_BITS
,
2185 .is_write
= is_write
,
2188 assert((qiov
->size
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2191 * In sync call context, when the vcpu is blocked, this throttling timer
2192 * will not fire; so the I/O throttling function has to be disabled here
2193 * if it has been enabled.
2195 if (bs
->io_limits_enabled
) {
2196 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2197 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2198 bdrv_io_limits_disable(bs
);
2201 if (qemu_in_coroutine()) {
2202 /* Fast-path if already in coroutine context */
2203 bdrv_rw_co_entry(&rwco
);
2205 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2206 qemu_coroutine_enter(co
, &rwco
);
2207 while (rwco
.ret
== NOT_DONE
) {
2215 * Process a synchronous request using coroutines
2217 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2218 int nb_sectors
, bool is_write
)
2221 struct iovec iov
= {
2222 .iov_base
= (void *)buf
,
2223 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2226 qemu_iovec_init_external(&qiov
, &iov
, 1);
2227 return bdrv_rwv_co(bs
, sector_num
, &qiov
, is_write
);
2230 /* return < 0 if error. See bdrv_write() for the return codes */
2231 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2232 uint8_t *buf
, int nb_sectors
)
2234 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false);
2237 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2238 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2239 uint8_t *buf
, int nb_sectors
)
2244 enabled
= bs
->io_limits_enabled
;
2245 bs
->io_limits_enabled
= false;
2246 ret
= bdrv_read(bs
, 0, buf
, 1);
2247 bs
->io_limits_enabled
= enabled
;
2251 /* Return < 0 if error. Important errors are:
2252 -EIO generic I/O error (may happen for all errors)
2253 -ENOMEDIUM No media inserted.
2254 -EINVAL Invalid sector number or nb_sectors
2255 -EACCES Trying to write a read-only device
2257 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2258 const uint8_t *buf
, int nb_sectors
)
2260 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true);
2263 int bdrv_writev(BlockDriverState
*bs
, int64_t sector_num
, QEMUIOVector
*qiov
)
2265 return bdrv_rwv_co(bs
, sector_num
, qiov
, true);
2268 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2269 void *buf
, int count1
)
2271 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2272 int len
, nb_sectors
, count
;
2277 /* first read to align to sector start */
2278 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2281 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2283 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2285 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2293 /* read the sectors "in place" */
2294 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2295 if (nb_sectors
> 0) {
2296 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2298 sector_num
+= nb_sectors
;
2299 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2304 /* add data from the last sector */
2306 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2308 memcpy(buf
, tmp_buf
, count
);
2313 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2315 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2316 int len
, nb_sectors
, count
;
2322 /* first write to align to sector start */
2323 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2326 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2328 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2330 qemu_iovec_to_buf(qiov
, 0, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)),
2332 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2340 /* write the sectors "in place" */
2341 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2342 if (nb_sectors
> 0) {
2343 QEMUIOVector qiov_inplace
;
2345 qemu_iovec_init(&qiov_inplace
, qiov
->niov
);
2346 qemu_iovec_concat(&qiov_inplace
, qiov
, len
,
2347 nb_sectors
<< BDRV_SECTOR_BITS
);
2348 ret
= bdrv_writev(bs
, sector_num
, &qiov_inplace
);
2349 qemu_iovec_destroy(&qiov_inplace
);
2354 sector_num
+= nb_sectors
;
2355 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2359 /* add data from the last sector */
2361 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2363 qemu_iovec_to_buf(qiov
, qiov
->size
- count
, tmp_buf
, count
);
2364 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2370 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2371 const void *buf
, int count1
)
2374 struct iovec iov
= {
2375 .iov_base
= (void *) buf
,
2379 qemu_iovec_init_external(&qiov
, &iov
, 1);
2380 return bdrv_pwritev(bs
, offset
, &qiov
);
2384 * Writes to the file and ensures that no writes are reordered across this
2385 * request (acts as a barrier)
2387 * Returns 0 on success, -errno in error cases.
2389 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2390 const void *buf
, int count
)
2394 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2399 /* No flush needed for cache modes that already do it */
2400 if (bs
->enable_write_cache
) {
2407 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2408 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2410 /* Perform I/O through a temporary buffer so that users who scribble over
2411 * their read buffer while the operation is in progress do not end up
2412 * modifying the image file. This is critical for zero-copy guest I/O
2413 * where anything might happen inside guest memory.
2415 void *bounce_buffer
;
2417 BlockDriver
*drv
= bs
->drv
;
2419 QEMUIOVector bounce_qiov
;
2420 int64_t cluster_sector_num
;
2421 int cluster_nb_sectors
;
2425 /* Cover entire cluster so no additional backing file I/O is required when
2426 * allocating cluster in the image file.
2428 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2429 &cluster_sector_num
, &cluster_nb_sectors
);
2431 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2432 cluster_sector_num
, cluster_nb_sectors
);
2434 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2435 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2436 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2438 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2444 if (drv
->bdrv_co_write_zeroes
&&
2445 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2446 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2447 cluster_nb_sectors
);
2449 /* This does not change the data on the disk, it is not necessary
2450 * to flush even in cache=writethrough mode.
2452 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2457 /* It might be okay to ignore write errors for guest requests. If this
2458 * is a deliberate copy-on-read then we don't want to ignore the error.
2459 * Simply report it in all cases.
2464 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2465 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2466 nb_sectors
* BDRV_SECTOR_SIZE
);
2469 qemu_vfree(bounce_buffer
);
2474 * Handle a read request in coroutine context
2476 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2477 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2478 BdrvRequestFlags flags
)
2480 BlockDriver
*drv
= bs
->drv
;
2481 BdrvTrackedRequest req
;
2487 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2491 /* throttling disk read I/O */
2492 if (bs
->io_limits_enabled
) {
2493 bdrv_io_limits_intercept(bs
, false, nb_sectors
);
2496 if (bs
->copy_on_read
) {
2497 flags
|= BDRV_REQ_COPY_ON_READ
;
2499 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2500 bs
->copy_on_read_in_flight
++;
2503 if (bs
->copy_on_read_in_flight
) {
2504 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2507 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2509 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2512 ret
= bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2517 if (!ret
|| pnum
!= nb_sectors
) {
2518 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2523 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2526 tracked_request_end(&req
);
2528 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2529 bs
->copy_on_read_in_flight
--;
2535 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2536 int nb_sectors
, QEMUIOVector
*qiov
)
2538 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2540 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2543 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2544 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2546 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2548 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2549 BDRV_REQ_COPY_ON_READ
);
2552 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2553 int64_t sector_num
, int nb_sectors
)
2555 BlockDriver
*drv
= bs
->drv
;
2560 /* TODO Emulate only part of misaligned requests instead of letting block
2561 * drivers return -ENOTSUP and emulate everything */
2563 /* First try the efficient write zeroes operation */
2564 if (drv
->bdrv_co_write_zeroes
) {
2565 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2566 if (ret
!= -ENOTSUP
) {
2571 /* Fall back to bounce buffer if write zeroes is unsupported */
2572 iov
.iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
;
2573 iov
.iov_base
= qemu_blockalign(bs
, iov
.iov_len
);
2574 memset(iov
.iov_base
, 0, iov
.iov_len
);
2575 qemu_iovec_init_external(&qiov
, &iov
, 1);
2577 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, &qiov
);
2579 qemu_vfree(iov
.iov_base
);
2584 * Handle a write request in coroutine context
2586 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2587 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2588 BdrvRequestFlags flags
)
2590 BlockDriver
*drv
= bs
->drv
;
2591 BdrvTrackedRequest req
;
2597 if (bs
->read_only
) {
2600 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2604 /* throttling disk write I/O */
2605 if (bs
->io_limits_enabled
) {
2606 bdrv_io_limits_intercept(bs
, true, nb_sectors
);
2609 if (bs
->copy_on_read_in_flight
) {
2610 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2613 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2615 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, &req
);
2618 /* Do nothing, write notifier decided to fail this request */
2619 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
2620 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
);
2622 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2625 if (ret
== 0 && !bs
->enable_write_cache
) {
2626 ret
= bdrv_co_flush(bs
);
2629 if (bs
->dirty_bitmap
) {
2630 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2633 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2634 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2637 tracked_request_end(&req
);
2642 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2643 int nb_sectors
, QEMUIOVector
*qiov
)
2645 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2647 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2650 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2651 int64_t sector_num
, int nb_sectors
)
2653 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2655 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2656 BDRV_REQ_ZERO_WRITE
);
2660 * Truncate file to 'offset' bytes (needed only for file protocols)
2662 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2664 BlockDriver
*drv
= bs
->drv
;
2668 if (!drv
->bdrv_truncate
)
2672 if (bdrv_in_use(bs
))
2674 ret
= drv
->bdrv_truncate(bs
, offset
);
2676 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2677 bdrv_dev_resize_cb(bs
);
2683 * Length of a allocated file in bytes. Sparse files are counted by actual
2684 * allocated space. Return < 0 if error or unknown.
2686 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2688 BlockDriver
*drv
= bs
->drv
;
2692 if (drv
->bdrv_get_allocated_file_size
) {
2693 return drv
->bdrv_get_allocated_file_size(bs
);
2696 return bdrv_get_allocated_file_size(bs
->file
);
2702 * Length of a file in bytes. Return < 0 if error or unknown.
2704 int64_t bdrv_getlength(BlockDriverState
*bs
)
2706 BlockDriver
*drv
= bs
->drv
;
2710 if (bs
->growable
|| bdrv_dev_has_removable_media(bs
)) {
2711 if (drv
->bdrv_getlength
) {
2712 return drv
->bdrv_getlength(bs
);
2715 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2718 /* return 0 as number of sectors if no device present or error */
2719 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2722 length
= bdrv_getlength(bs
);
2726 length
= length
>> BDRV_SECTOR_BITS
;
2727 *nb_sectors_ptr
= length
;
2730 /* throttling disk io limits */
2731 void bdrv_set_io_limits(BlockDriverState
*bs
,
2732 BlockIOLimit
*io_limits
)
2734 bs
->io_limits
= *io_limits
;
2735 bs
->io_limits_enabled
= bdrv_io_limits_enabled(bs
);
2738 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2739 BlockdevOnError on_write_error
)
2741 bs
->on_read_error
= on_read_error
;
2742 bs
->on_write_error
= on_write_error
;
2745 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2747 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2750 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2752 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2755 case BLOCKDEV_ON_ERROR_ENOSPC
:
2756 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2757 case BLOCKDEV_ON_ERROR_STOP
:
2758 return BDRV_ACTION_STOP
;
2759 case BLOCKDEV_ON_ERROR_REPORT
:
2760 return BDRV_ACTION_REPORT
;
2761 case BLOCKDEV_ON_ERROR_IGNORE
:
2762 return BDRV_ACTION_IGNORE
;
2768 /* This is done by device models because, while the block layer knows
2769 * about the error, it does not know whether an operation comes from
2770 * the device or the block layer (from a job, for example).
2772 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
2773 bool is_read
, int error
)
2776 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
2777 if (action
== BDRV_ACTION_STOP
) {
2778 vm_stop(RUN_STATE_IO_ERROR
);
2779 bdrv_iostatus_set_err(bs
, error
);
2783 int bdrv_is_read_only(BlockDriverState
*bs
)
2785 return bs
->read_only
;
2788 int bdrv_is_sg(BlockDriverState
*bs
)
2793 int bdrv_enable_write_cache(BlockDriverState
*bs
)
2795 return bs
->enable_write_cache
;
2798 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
2800 bs
->enable_write_cache
= wce
;
2802 /* so a reopen() will preserve wce */
2804 bs
->open_flags
|= BDRV_O_CACHE_WB
;
2806 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
2810 int bdrv_is_encrypted(BlockDriverState
*bs
)
2812 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
2814 return bs
->encrypted
;
2817 int bdrv_key_required(BlockDriverState
*bs
)
2819 BlockDriverState
*backing_hd
= bs
->backing_hd
;
2821 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
2823 return (bs
->encrypted
&& !bs
->valid_key
);
2826 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
2829 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
2830 ret
= bdrv_set_key(bs
->backing_hd
, key
);
2836 if (!bs
->encrypted
) {
2838 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
2841 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
2844 } else if (!bs
->valid_key
) {
2846 /* call the change callback now, we skipped it on open */
2847 bdrv_dev_change_media_cb(bs
, true);
2852 const char *bdrv_get_format_name(BlockDriverState
*bs
)
2854 return bs
->drv
? bs
->drv
->format_name
: NULL
;
2857 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
2862 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
2863 it(opaque
, drv
->format_name
);
2867 BlockDriverState
*bdrv_find(const char *name
)
2869 BlockDriverState
*bs
;
2871 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2872 if (!strcmp(name
, bs
->device_name
)) {
2879 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
2882 return QTAILQ_FIRST(&bdrv_states
);
2884 return QTAILQ_NEXT(bs
, list
);
2887 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
2889 BlockDriverState
*bs
;
2891 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2896 const char *bdrv_get_device_name(BlockDriverState
*bs
)
2898 return bs
->device_name
;
2901 int bdrv_get_flags(BlockDriverState
*bs
)
2903 return bs
->open_flags
;
2906 void bdrv_flush_all(void)
2908 BlockDriverState
*bs
;
2910 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2915 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
2920 int bdrv_has_zero_init(BlockDriverState
*bs
)
2924 if (bs
->drv
->bdrv_has_zero_init
) {
2925 return bs
->drv
->bdrv_has_zero_init(bs
);
2932 typedef struct BdrvCoIsAllocatedData
{
2933 BlockDriverState
*bs
;
2934 BlockDriverState
*base
;
2940 } BdrvCoIsAllocatedData
;
2943 * Returns true iff the specified sector is present in the disk image. Drivers
2944 * not implementing the functionality are assumed to not support backing files,
2945 * hence all their sectors are reported as allocated.
2947 * If 'sector_num' is beyond the end of the disk image the return value is 0
2948 * and 'pnum' is set to 0.
2950 * 'pnum' is set to the number of sectors (including and immediately following
2951 * the specified sector) that are known to be in the same
2952 * allocated/unallocated state.
2954 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2955 * beyond the end of the disk image it will be clamped.
2957 int coroutine_fn
bdrv_co_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
2958 int nb_sectors
, int *pnum
)
2962 if (sector_num
>= bs
->total_sectors
) {
2967 n
= bs
->total_sectors
- sector_num
;
2968 if (n
< nb_sectors
) {
2972 if (!bs
->drv
->bdrv_co_is_allocated
) {
2977 return bs
->drv
->bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, pnum
);
2980 /* Coroutine wrapper for bdrv_is_allocated() */
2981 static void coroutine_fn
bdrv_is_allocated_co_entry(void *opaque
)
2983 BdrvCoIsAllocatedData
*data
= opaque
;
2984 BlockDriverState
*bs
= data
->bs
;
2986 data
->ret
= bdrv_co_is_allocated(bs
, data
->sector_num
, data
->nb_sectors
,
2992 * Synchronous wrapper around bdrv_co_is_allocated().
2994 * See bdrv_co_is_allocated() for details.
2996 int bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
,
3000 BdrvCoIsAllocatedData data
= {
3002 .sector_num
= sector_num
,
3003 .nb_sectors
= nb_sectors
,
3008 co
= qemu_coroutine_create(bdrv_is_allocated_co_entry
);
3009 qemu_coroutine_enter(co
, &data
);
3010 while (!data
.done
) {
3017 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3019 * Return true if the given sector is allocated in any image between
3020 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3021 * sector is allocated in any image of the chain. Return false otherwise.
3023 * 'pnum' is set to the number of sectors (including and immediately following
3024 * the specified sector) that are known to be in the same
3025 * allocated/unallocated state.
3028 int coroutine_fn
bdrv_co_is_allocated_above(BlockDriverState
*top
,
3029 BlockDriverState
*base
,
3031 int nb_sectors
, int *pnum
)
3033 BlockDriverState
*intermediate
;
3034 int ret
, n
= nb_sectors
;
3037 while (intermediate
&& intermediate
!= base
) {
3039 ret
= bdrv_co_is_allocated(intermediate
, sector_num
, nb_sectors
,
3049 * [sector_num, nb_sectors] is unallocated on top but intermediate
3052 * [sector_num+x, nr_sectors] allocated.
3054 if (n
> pnum_inter
&&
3055 (intermediate
== top
||
3056 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
3060 intermediate
= intermediate
->backing_hd
;
3067 /* Coroutine wrapper for bdrv_is_allocated_above() */
3068 static void coroutine_fn
bdrv_is_allocated_above_co_entry(void *opaque
)
3070 BdrvCoIsAllocatedData
*data
= opaque
;
3071 BlockDriverState
*top
= data
->bs
;
3072 BlockDriverState
*base
= data
->base
;
3074 data
->ret
= bdrv_co_is_allocated_above(top
, base
, data
->sector_num
,
3075 data
->nb_sectors
, data
->pnum
);
3080 * Synchronous wrapper around bdrv_co_is_allocated_above().
3082 * See bdrv_co_is_allocated_above() for details.
3084 int bdrv_is_allocated_above(BlockDriverState
*top
, BlockDriverState
*base
,
3085 int64_t sector_num
, int nb_sectors
, int *pnum
)
3088 BdrvCoIsAllocatedData data
= {
3091 .sector_num
= sector_num
,
3092 .nb_sectors
= nb_sectors
,
3097 co
= qemu_coroutine_create(bdrv_is_allocated_above_co_entry
);
3098 qemu_coroutine_enter(co
, &data
);
3099 while (!data
.done
) {
3105 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
3107 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3108 return bs
->backing_file
;
3109 else if (bs
->encrypted
)
3110 return bs
->filename
;
3115 void bdrv_get_backing_filename(BlockDriverState
*bs
,
3116 char *filename
, int filename_size
)
3118 pstrcpy(filename
, filename_size
, bs
->backing_file
);
3121 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
3122 const uint8_t *buf
, int nb_sectors
)
3124 BlockDriver
*drv
= bs
->drv
;
3127 if (!drv
->bdrv_write_compressed
)
3129 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3132 assert(!bs
->dirty_bitmap
);
3134 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3137 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3139 BlockDriver
*drv
= bs
->drv
;
3142 if (!drv
->bdrv_get_info
)
3144 memset(bdi
, 0, sizeof(*bdi
));
3145 return drv
->bdrv_get_info(bs
, bdi
);
3148 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3149 int64_t pos
, int size
)
3152 struct iovec iov
= {
3153 .iov_base
= (void *) buf
,
3157 qemu_iovec_init_external(&qiov
, &iov
, 1);
3158 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
3161 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
3163 BlockDriver
*drv
= bs
->drv
;
3167 } else if (drv
->bdrv_save_vmstate
) {
3168 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
3169 } else if (bs
->file
) {
3170 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
3176 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3177 int64_t pos
, int size
)
3179 BlockDriver
*drv
= bs
->drv
;
3182 if (drv
->bdrv_load_vmstate
)
3183 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3185 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3189 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3191 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
3195 bs
->drv
->bdrv_debug_event(bs
, event
);
3198 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3201 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3205 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3206 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3212 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3214 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3218 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3219 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3225 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3227 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3231 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3232 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3238 int bdrv_is_snapshot(BlockDriverState
*bs
)
3240 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3243 /* backing_file can either be relative, or absolute, or a protocol. If it is
3244 * relative, it must be relative to the chain. So, passing in bs->filename
3245 * from a BDS as backing_file should not be done, as that may be relative to
3246 * the CWD rather than the chain. */
3247 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3248 const char *backing_file
)
3250 char *filename_full
= NULL
;
3251 char *backing_file_full
= NULL
;
3252 char *filename_tmp
= NULL
;
3253 int is_protocol
= 0;
3254 BlockDriverState
*curr_bs
= NULL
;
3255 BlockDriverState
*retval
= NULL
;
3257 if (!bs
|| !bs
->drv
|| !backing_file
) {
3261 filename_full
= g_malloc(PATH_MAX
);
3262 backing_file_full
= g_malloc(PATH_MAX
);
3263 filename_tmp
= g_malloc(PATH_MAX
);
3265 is_protocol
= path_has_protocol(backing_file
);
3267 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3269 /* If either of the filename paths is actually a protocol, then
3270 * compare unmodified paths; otherwise make paths relative */
3271 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3272 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3273 retval
= curr_bs
->backing_hd
;
3277 /* If not an absolute filename path, make it relative to the current
3278 * image's filename path */
3279 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3282 /* We are going to compare absolute pathnames */
3283 if (!realpath(filename_tmp
, filename_full
)) {
3287 /* We need to make sure the backing filename we are comparing against
3288 * is relative to the current image filename (or absolute) */
3289 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3290 curr_bs
->backing_file
);
3292 if (!realpath(filename_tmp
, backing_file_full
)) {
3296 if (strcmp(backing_file_full
, filename_full
) == 0) {
3297 retval
= curr_bs
->backing_hd
;
3303 g_free(filename_full
);
3304 g_free(backing_file_full
);
3305 g_free(filename_tmp
);
3309 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3315 if (!bs
->backing_hd
) {
3319 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3322 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3324 BlockDriverState
*curr_bs
= NULL
;
3332 while (curr_bs
->backing_hd
) {
3333 curr_bs
= curr_bs
->backing_hd
;
3338 /**************************************************************/
3341 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3342 QEMUIOVector
*qiov
, int nb_sectors
,
3343 BlockDriverCompletionFunc
*cb
, void *opaque
)
3345 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3347 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3351 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3352 QEMUIOVector
*qiov
, int nb_sectors
,
3353 BlockDriverCompletionFunc
*cb
, void *opaque
)
3355 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3357 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3362 typedef struct MultiwriteCB
{
3367 BlockDriverCompletionFunc
*cb
;
3369 QEMUIOVector
*free_qiov
;
3373 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3377 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3378 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3379 if (mcb
->callbacks
[i
].free_qiov
) {
3380 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3382 g_free(mcb
->callbacks
[i
].free_qiov
);
3386 static void multiwrite_cb(void *opaque
, int ret
)
3388 MultiwriteCB
*mcb
= opaque
;
3390 trace_multiwrite_cb(mcb
, ret
);
3392 if (ret
< 0 && !mcb
->error
) {
3396 mcb
->num_requests
--;
3397 if (mcb
->num_requests
== 0) {
3398 multiwrite_user_cb(mcb
);
3403 static int multiwrite_req_compare(const void *a
, const void *b
)
3405 const BlockRequest
*req1
= a
, *req2
= b
;
3408 * Note that we can't simply subtract req2->sector from req1->sector
3409 * here as that could overflow the return value.
3411 if (req1
->sector
> req2
->sector
) {
3413 } else if (req1
->sector
< req2
->sector
) {
3421 * Takes a bunch of requests and tries to merge them. Returns the number of
3422 * requests that remain after merging.
3424 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3425 int num_reqs
, MultiwriteCB
*mcb
)
3429 // Sort requests by start sector
3430 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3432 // Check if adjacent requests touch the same clusters. If so, combine them,
3433 // filling up gaps with zero sectors.
3435 for (i
= 1; i
< num_reqs
; i
++) {
3437 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3439 // Handle exactly sequential writes and overlapping writes.
3440 if (reqs
[i
].sector
<= oldreq_last
) {
3444 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3450 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3451 qemu_iovec_init(qiov
,
3452 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3454 // Add the first request to the merged one. If the requests are
3455 // overlapping, drop the last sectors of the first request.
3456 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3457 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3459 // We should need to add any zeros between the two requests
3460 assert (reqs
[i
].sector
<= oldreq_last
);
3462 // Add the second request
3463 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3465 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3466 reqs
[outidx
].qiov
= qiov
;
3468 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3471 reqs
[outidx
].sector
= reqs
[i
].sector
;
3472 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3473 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3481 * Submit multiple AIO write requests at once.
3483 * On success, the function returns 0 and all requests in the reqs array have
3484 * been submitted. In error case this function returns -1, and any of the
3485 * requests may or may not be submitted yet. In particular, this means that the
3486 * callback will be called for some of the requests, for others it won't. The
3487 * caller must check the error field of the BlockRequest to wait for the right
3488 * callbacks (if error != 0, no callback will be called).
3490 * The implementation may modify the contents of the reqs array, e.g. to merge
3491 * requests. However, the fields opaque and error are left unmodified as they
3492 * are used to signal failure for a single request to the caller.
3494 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3499 /* don't submit writes if we don't have a medium */
3500 if (bs
->drv
== NULL
) {
3501 for (i
= 0; i
< num_reqs
; i
++) {
3502 reqs
[i
].error
= -ENOMEDIUM
;
3507 if (num_reqs
== 0) {
3511 // Create MultiwriteCB structure
3512 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3513 mcb
->num_requests
= 0;
3514 mcb
->num_callbacks
= num_reqs
;
3516 for (i
= 0; i
< num_reqs
; i
++) {
3517 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3518 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3521 // Check for mergable requests
3522 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3524 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3526 /* Run the aio requests. */
3527 mcb
->num_requests
= num_reqs
;
3528 for (i
= 0; i
< num_reqs
; i
++) {
3529 bdrv_aio_writev(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3530 reqs
[i
].nb_sectors
, multiwrite_cb
, mcb
);
3536 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3538 acb
->aiocb_info
->cancel(acb
);
3541 /* block I/O throttling */
3542 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
3543 bool is_write
, double elapsed_time
, uint64_t *wait
)
3545 uint64_t bps_limit
= 0;
3547 double bytes_limit
, bytes_base
, bytes_res
;
3548 double slice_time
, wait_time
;
3550 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3551 bps_limit
= bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
3552 } else if (bs
->io_limits
.bps
[is_write
]) {
3553 bps_limit
= bs
->io_limits
.bps
[is_write
];
3562 slice_time
= bs
->slice_end
- bs
->slice_start
;
3563 slice_time
/= (NANOSECONDS_PER_SECOND
);
3564 bytes_limit
= bps_limit
* slice_time
;
3565 bytes_base
= bs
->slice_submitted
.bytes
[is_write
];
3566 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3567 bytes_base
+= bs
->slice_submitted
.bytes
[!is_write
];
3570 /* bytes_base: the bytes of data which have been read/written; and
3571 * it is obtained from the history statistic info.
3572 * bytes_res: the remaining bytes of data which need to be read/written.
3573 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3574 * the total time for completing reading/writting all data.
3576 bytes_res
= (unsigned) nb_sectors
* BDRV_SECTOR_SIZE
;
3578 if (bytes_base
+ bytes_res
<= bytes_limit
) {
3586 /* Calc approx time to dispatch */
3587 wait_time
= (bytes_base
+ bytes_res
) / bps_limit
- elapsed_time
;
3589 /* When the I/O rate at runtime exceeds the limits,
3590 * bs->slice_end need to be extended in order that the current statistic
3591 * info can be kept until the timer fire, so it is increased and tuned
3592 * based on the result of experiment.
3594 extension
= wait_time
* NANOSECONDS_PER_SECOND
;
3595 extension
= DIV_ROUND_UP(extension
, BLOCK_IO_SLICE_TIME
) *
3596 BLOCK_IO_SLICE_TIME
;
3597 bs
->slice_end
+= extension
;
3599 *wait
= wait_time
* NANOSECONDS_PER_SECOND
;
3605 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
3606 double elapsed_time
, uint64_t *wait
)
3608 uint64_t iops_limit
= 0;
3609 double ios_limit
, ios_base
;
3610 double slice_time
, wait_time
;
3612 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3613 iops_limit
= bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
3614 } else if (bs
->io_limits
.iops
[is_write
]) {
3615 iops_limit
= bs
->io_limits
.iops
[is_write
];
3624 slice_time
= bs
->slice_end
- bs
->slice_start
;
3625 slice_time
/= (NANOSECONDS_PER_SECOND
);
3626 ios_limit
= iops_limit
* slice_time
;
3627 ios_base
= bs
->slice_submitted
.ios
[is_write
];
3628 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3629 ios_base
+= bs
->slice_submitted
.ios
[!is_write
];
3632 if (ios_base
+ 1 <= ios_limit
) {
3640 /* Calc approx time to dispatch, in seconds */
3641 wait_time
= (ios_base
+ 1) / iops_limit
;
3642 if (wait_time
> elapsed_time
) {
3643 wait_time
= wait_time
- elapsed_time
;
3648 /* Exceeded current slice, extend it by another slice time */
3649 bs
->slice_end
+= BLOCK_IO_SLICE_TIME
;
3651 *wait
= wait_time
* NANOSECONDS_PER_SECOND
;
3657 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
3658 bool is_write
, int64_t *wait
)
3660 int64_t now
, max_wait
;
3661 uint64_t bps_wait
= 0, iops_wait
= 0;
3662 double elapsed_time
;
3663 int bps_ret
, iops_ret
;
3665 now
= qemu_get_clock_ns(vm_clock
);
3666 if (now
> bs
->slice_end
) {
3667 bs
->slice_start
= now
;
3668 bs
->slice_end
= now
+ BLOCK_IO_SLICE_TIME
;
3669 memset(&bs
->slice_submitted
, 0, sizeof(bs
->slice_submitted
));
3672 elapsed_time
= now
- bs
->slice_start
;
3673 elapsed_time
/= (NANOSECONDS_PER_SECOND
);
3675 bps_ret
= bdrv_exceed_bps_limits(bs
, nb_sectors
,
3676 is_write
, elapsed_time
, &bps_wait
);
3677 iops_ret
= bdrv_exceed_iops_limits(bs
, is_write
,
3678 elapsed_time
, &iops_wait
);
3679 if (bps_ret
|| iops_ret
) {
3680 max_wait
= bps_wait
> iops_wait
? bps_wait
: iops_wait
;
3685 now
= qemu_get_clock_ns(vm_clock
);
3686 if (bs
->slice_end
< now
+ max_wait
) {
3687 bs
->slice_end
= now
+ max_wait
;
3697 bs
->slice_submitted
.bytes
[is_write
] += (int64_t)nb_sectors
*
3699 bs
->slice_submitted
.ios
[is_write
]++;
3704 /**************************************************************/
3705 /* async block device emulation */
3707 typedef struct BlockDriverAIOCBSync
{
3708 BlockDriverAIOCB common
;
3711 /* vector translation state */
3715 } BlockDriverAIOCBSync
;
3717 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3719 BlockDriverAIOCBSync
*acb
=
3720 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3721 qemu_bh_delete(acb
->bh
);
3723 qemu_aio_release(acb
);
3726 static const AIOCBInfo bdrv_em_aiocb_info
= {
3727 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3728 .cancel
= bdrv_aio_cancel_em
,
3731 static void bdrv_aio_bh_cb(void *opaque
)
3733 BlockDriverAIOCBSync
*acb
= opaque
;
3736 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3737 qemu_vfree(acb
->bounce
);
3738 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3739 qemu_bh_delete(acb
->bh
);
3741 qemu_aio_release(acb
);
3744 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3748 BlockDriverCompletionFunc
*cb
,
3753 BlockDriverAIOCBSync
*acb
;
3755 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3756 acb
->is_write
= is_write
;
3758 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3759 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3762 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3763 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3765 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3768 qemu_bh_schedule(acb
->bh
);
3770 return &acb
->common
;
3773 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3774 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3775 BlockDriverCompletionFunc
*cb
, void *opaque
)
3777 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3780 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3781 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3782 BlockDriverCompletionFunc
*cb
, void *opaque
)
3784 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3788 typedef struct BlockDriverAIOCBCoroutine
{
3789 BlockDriverAIOCB common
;
3794 } BlockDriverAIOCBCoroutine
;
3796 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3798 BlockDriverAIOCBCoroutine
*acb
=
3799 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3808 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3809 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3810 .cancel
= bdrv_aio_co_cancel_em
,
3813 static void bdrv_co_em_bh(void *opaque
)
3815 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3817 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
3823 qemu_bh_delete(acb
->bh
);
3824 qemu_aio_release(acb
);
3827 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3828 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
3830 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3831 BlockDriverState
*bs
= acb
->common
.bs
;
3833 if (!acb
->is_write
) {
3834 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
3835 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3837 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
3838 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3841 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3842 qemu_bh_schedule(acb
->bh
);
3845 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
3849 BlockDriverCompletionFunc
*cb
,
3854 BlockDriverAIOCBCoroutine
*acb
;
3856 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3857 acb
->req
.sector
= sector_num
;
3858 acb
->req
.nb_sectors
= nb_sectors
;
3859 acb
->req
.qiov
= qiov
;
3860 acb
->is_write
= is_write
;
3863 co
= qemu_coroutine_create(bdrv_co_do_rw
);
3864 qemu_coroutine_enter(co
, acb
);
3866 return &acb
->common
;
3869 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
3871 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3872 BlockDriverState
*bs
= acb
->common
.bs
;
3874 acb
->req
.error
= bdrv_co_flush(bs
);
3875 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3876 qemu_bh_schedule(acb
->bh
);
3879 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
3880 BlockDriverCompletionFunc
*cb
, void *opaque
)
3882 trace_bdrv_aio_flush(bs
, opaque
);
3885 BlockDriverAIOCBCoroutine
*acb
;
3887 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3890 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
3891 qemu_coroutine_enter(co
, acb
);
3893 return &acb
->common
;
3896 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
3898 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3899 BlockDriverState
*bs
= acb
->common
.bs
;
3901 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
3902 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3903 qemu_bh_schedule(acb
->bh
);
3906 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
3907 int64_t sector_num
, int nb_sectors
,
3908 BlockDriverCompletionFunc
*cb
, void *opaque
)
3911 BlockDriverAIOCBCoroutine
*acb
;
3913 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
3915 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3916 acb
->req
.sector
= sector_num
;
3917 acb
->req
.nb_sectors
= nb_sectors
;
3919 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
3920 qemu_coroutine_enter(co
, acb
);
3922 return &acb
->common
;
3925 void bdrv_init(void)
3927 module_call_init(MODULE_INIT_BLOCK
);
3930 void bdrv_init_with_whitelist(void)
3932 use_bdrv_whitelist
= 1;
3936 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
3937 BlockDriverCompletionFunc
*cb
, void *opaque
)
3939 BlockDriverAIOCB
*acb
;
3941 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
3942 acb
->aiocb_info
= aiocb_info
;
3945 acb
->opaque
= opaque
;
3949 void qemu_aio_release(void *p
)
3951 BlockDriverAIOCB
*acb
= p
;
3952 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
3955 /**************************************************************/
3956 /* Coroutine block device emulation */
3958 typedef struct CoroutineIOCompletion
{
3959 Coroutine
*coroutine
;
3961 } CoroutineIOCompletion
;
3963 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
3965 CoroutineIOCompletion
*co
= opaque
;
3968 qemu_coroutine_enter(co
->coroutine
, NULL
);
3971 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
3972 int nb_sectors
, QEMUIOVector
*iov
,
3975 CoroutineIOCompletion co
= {
3976 .coroutine
= qemu_coroutine_self(),
3978 BlockDriverAIOCB
*acb
;
3981 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
3982 bdrv_co_io_em_complete
, &co
);
3984 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
3985 bdrv_co_io_em_complete
, &co
);
3988 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
3992 qemu_coroutine_yield();
3997 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
3998 int64_t sector_num
, int nb_sectors
,
4001 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4004 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4005 int64_t sector_num
, int nb_sectors
,
4008 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4011 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4013 RwCo
*rwco
= opaque
;
4015 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4018 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4022 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4026 /* Write back cached data to the OS even with cache=unsafe */
4027 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4028 if (bs
->drv
->bdrv_co_flush_to_os
) {
4029 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4035 /* But don't actually force it to the disk with cache=unsafe */
4036 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4040 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4041 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4042 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4043 } else if (bs
->drv
->bdrv_aio_flush
) {
4044 BlockDriverAIOCB
*acb
;
4045 CoroutineIOCompletion co
= {
4046 .coroutine
= qemu_coroutine_self(),
4049 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4053 qemu_coroutine_yield();
4058 * Some block drivers always operate in either writethrough or unsafe
4059 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4060 * know how the server works (because the behaviour is hardcoded or
4061 * depends on server-side configuration), so we can't ensure that
4062 * everything is safe on disk. Returning an error doesn't work because
4063 * that would break guests even if the server operates in writethrough
4066 * Let's hope the user knows what he's doing.
4074 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4075 * in the case of cache=unsafe, so there are no useless flushes.
4078 return bdrv_co_flush(bs
->file
);
4081 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4083 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4084 bs
->drv
->bdrv_invalidate_cache(bs
);
4088 void bdrv_invalidate_cache_all(void)
4090 BlockDriverState
*bs
;
4092 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4093 bdrv_invalidate_cache(bs
);
4097 void bdrv_clear_incoming_migration_all(void)
4099 BlockDriverState
*bs
;
4101 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4102 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4106 int bdrv_flush(BlockDriverState
*bs
)
4114 if (qemu_in_coroutine()) {
4115 /* Fast-path if already in coroutine context */
4116 bdrv_flush_co_entry(&rwco
);
4118 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4119 qemu_coroutine_enter(co
, &rwco
);
4120 while (rwco
.ret
== NOT_DONE
) {
4128 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4130 RwCo
*rwco
= opaque
;
4132 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4135 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4140 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4142 } else if (bs
->read_only
) {
4146 if (bs
->dirty_bitmap
) {
4147 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4150 /* Do nothing if disabled. */
4151 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4155 if (bs
->drv
->bdrv_co_discard
) {
4156 return bs
->drv
->bdrv_co_discard(bs
, sector_num
, nb_sectors
);
4157 } else if (bs
->drv
->bdrv_aio_discard
) {
4158 BlockDriverAIOCB
*acb
;
4159 CoroutineIOCompletion co
= {
4160 .coroutine
= qemu_coroutine_self(),
4163 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4164 bdrv_co_io_em_complete
, &co
);
4168 qemu_coroutine_yield();
4176 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4181 .sector_num
= sector_num
,
4182 .nb_sectors
= nb_sectors
,
4186 if (qemu_in_coroutine()) {
4187 /* Fast-path if already in coroutine context */
4188 bdrv_discard_co_entry(&rwco
);
4190 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4191 qemu_coroutine_enter(co
, &rwco
);
4192 while (rwco
.ret
== NOT_DONE
) {
4200 /**************************************************************/
4201 /* removable device support */
4204 * Return TRUE if the media is present
4206 int bdrv_is_inserted(BlockDriverState
*bs
)
4208 BlockDriver
*drv
= bs
->drv
;
4212 if (!drv
->bdrv_is_inserted
)
4214 return drv
->bdrv_is_inserted(bs
);
4218 * Return whether the media changed since the last call to this
4219 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4221 int bdrv_media_changed(BlockDriverState
*bs
)
4223 BlockDriver
*drv
= bs
->drv
;
4225 if (drv
&& drv
->bdrv_media_changed
) {
4226 return drv
->bdrv_media_changed(bs
);
4232 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4234 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4236 BlockDriver
*drv
= bs
->drv
;
4238 if (drv
&& drv
->bdrv_eject
) {
4239 drv
->bdrv_eject(bs
, eject_flag
);
4242 if (bs
->device_name
[0] != '\0') {
4243 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4248 * Lock or unlock the media (if it is locked, the user won't be able
4249 * to eject it manually).
4251 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4253 BlockDriver
*drv
= bs
->drv
;
4255 trace_bdrv_lock_medium(bs
, locked
);
4257 if (drv
&& drv
->bdrv_lock_medium
) {
4258 drv
->bdrv_lock_medium(bs
, locked
);
4262 /* needed for generic scsi interface */
4264 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4266 BlockDriver
*drv
= bs
->drv
;
4268 if (drv
&& drv
->bdrv_ioctl
)
4269 return drv
->bdrv_ioctl(bs
, req
, buf
);
4273 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4274 unsigned long int req
, void *buf
,
4275 BlockDriverCompletionFunc
*cb
, void *opaque
)
4277 BlockDriver
*drv
= bs
->drv
;
4279 if (drv
&& drv
->bdrv_aio_ioctl
)
4280 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4284 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4286 bs
->buffer_alignment
= align
;
4289 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4291 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4295 * Check if all memory in this vector is sector aligned.
4297 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4301 for (i
= 0; i
< qiov
->niov
; i
++) {
4302 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4310 void bdrv_set_dirty_tracking(BlockDriverState
*bs
, int granularity
)
4312 int64_t bitmap_size
;
4314 assert((granularity
& (granularity
- 1)) == 0);
4317 granularity
>>= BDRV_SECTOR_BITS
;
4318 assert(!bs
->dirty_bitmap
);
4319 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4320 bs
->dirty_bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4322 if (bs
->dirty_bitmap
) {
4323 hbitmap_free(bs
->dirty_bitmap
);
4324 bs
->dirty_bitmap
= NULL
;
4329 int bdrv_get_dirty(BlockDriverState
*bs
, int64_t sector
)
4331 if (bs
->dirty_bitmap
) {
4332 return hbitmap_get(bs
->dirty_bitmap
, sector
);
4338 void bdrv_dirty_iter_init(BlockDriverState
*bs
, HBitmapIter
*hbi
)
4340 hbitmap_iter_init(hbi
, bs
->dirty_bitmap
, 0);
4343 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4346 hbitmap_set(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4349 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4352 hbitmap_reset(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4355 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
)
4357 if (bs
->dirty_bitmap
) {
4358 return hbitmap_count(bs
->dirty_bitmap
);
4364 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4366 assert(bs
->in_use
!= in_use
);
4367 bs
->in_use
= in_use
;
4370 int bdrv_in_use(BlockDriverState
*bs
)
4375 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4377 bs
->iostatus_enabled
= true;
4378 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4381 /* The I/O status is only enabled if the drive explicitly
4382 * enables it _and_ the VM is configured to stop on errors */
4383 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4385 return (bs
->iostatus_enabled
&&
4386 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4387 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4388 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4391 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4393 bs
->iostatus_enabled
= false;
4396 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4398 if (bdrv_iostatus_is_enabled(bs
)) {
4399 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4401 block_job_iostatus_reset(bs
->job
);
4406 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4408 assert(bdrv_iostatus_is_enabled(bs
));
4409 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4410 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4411 BLOCK_DEVICE_IO_STATUS_FAILED
;
4416 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4417 enum BlockAcctType type
)
4419 assert(type
< BDRV_MAX_IOTYPE
);
4421 cookie
->bytes
= bytes
;
4422 cookie
->start_time_ns
= get_clock();
4423 cookie
->type
= type
;
4427 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4429 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4431 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4432 bs
->nr_ops
[cookie
->type
]++;
4433 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4436 void bdrv_img_create(const char *filename
, const char *fmt
,
4437 const char *base_filename
, const char *base_fmt
,
4438 char *options
, uint64_t img_size
, int flags
,
4439 Error
**errp
, bool quiet
)
4441 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4442 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4443 BlockDriverState
*bs
= NULL
;
4444 BlockDriver
*drv
, *proto_drv
;
4445 BlockDriver
*backing_drv
= NULL
;
4448 /* Find driver and parse its options */
4449 drv
= bdrv_find_format(fmt
);
4451 error_setg(errp
, "Unknown file format '%s'", fmt
);
4455 proto_drv
= bdrv_find_protocol(filename
);
4457 error_setg(errp
, "Unknown protocol '%s'", filename
);
4461 create_options
= append_option_parameters(create_options
,
4462 drv
->create_options
);
4463 create_options
= append_option_parameters(create_options
,
4464 proto_drv
->create_options
);
4466 /* Create parameter list with default values */
4467 param
= parse_option_parameters("", create_options
, param
);
4469 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4471 /* Parse -o options */
4473 param
= parse_option_parameters(options
, create_options
, param
);
4474 if (param
== NULL
) {
4475 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4480 if (base_filename
) {
4481 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4483 error_setg(errp
, "Backing file not supported for file format '%s'",
4490 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4491 error_setg(errp
, "Backing file format not supported for file "
4492 "format '%s'", fmt
);
4497 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4498 if (backing_file
&& backing_file
->value
.s
) {
4499 if (!strcmp(filename
, backing_file
->value
.s
)) {
4500 error_setg(errp
, "Error: Trying to create an image with the "
4501 "same filename as the backing file");
4506 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4507 if (backing_fmt
&& backing_fmt
->value
.s
) {
4508 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4510 error_setg(errp
, "Unknown backing file format '%s'",
4511 backing_fmt
->value
.s
);
4516 // The size for the image must always be specified, with one exception:
4517 // If we are using a backing file, we can obtain the size from there
4518 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4519 if (size
&& size
->value
.n
== -1) {
4520 if (backing_file
&& backing_file
->value
.s
) {
4525 /* backing files always opened read-only */
4527 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4531 ret
= bdrv_open(bs
, backing_file
->value
.s
, NULL
, back_flags
,
4534 error_setg_errno(errp
, -ret
, "Could not open '%s'",
4535 backing_file
->value
.s
);
4538 bdrv_get_geometry(bs
, &size
);
4541 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4542 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4544 error_setg(errp
, "Image creation needs a size parameter");
4550 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4551 print_option_parameters(param
);
4554 ret
= bdrv_create(drv
, filename
, param
);
4556 if (ret
== -ENOTSUP
) {
4557 error_setg(errp
,"Formatting or formatting option not supported for "
4558 "file format '%s'", fmt
);
4559 } else if (ret
== -EFBIG
) {
4560 const char *cluster_size_hint
= "";
4561 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
4562 cluster_size_hint
= " (try using a larger cluster size)";
4564 error_setg(errp
, "The image size is too large for file format '%s'%s",
4565 fmt
, cluster_size_hint
);
4567 error_setg(errp
, "%s: error while creating %s: %s", filename
, fmt
,
4573 free_option_parameters(create_options
);
4574 free_option_parameters(param
);
4581 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
4583 /* Currently BlockDriverState always uses the main loop AioContext */
4584 return qemu_get_aio_context();
4587 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
4588 NotifierWithReturn
*notifier
)
4590 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);