2 * SD Memory Card emulation. Mostly correct for MMC too.
4 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
18 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
19 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
20 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
21 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
24 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
25 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 #define OUT_OF_RANGE (1 << 31)
35 #define ADDRESS_ERROR (1 << 30)
36 #define BLOCK_LEN_ERROR (1 << 29)
37 #define ERASE_SEQ_ERROR (1 << 28)
38 #define ERASE_PARAM (1 << 27)
39 #define WP_VIOLATION (1 << 26)
40 #define CARD_IS_LOCKED (1 << 25)
41 #define LOCK_UNLOCK_FAILED (1 << 24)
42 #define COM_CRC_ERROR (1 << 23)
43 #define ILLEGAL_COMMAND (1 << 22)
44 #define CARD_ECC_FAILED (1 << 21)
45 #define CC_ERROR (1 << 20)
46 #define SD_ERROR (1 << 19)
47 #define CID_CSD_OVERWRITE (1 << 16)
48 #define WP_ERASE_SKIP (1 << 15)
49 #define CARD_ECC_DISABLED (1 << 14)
50 #define ERASE_RESET (1 << 13)
51 #define CURRENT_STATE (7 << 9)
52 #define READY_FOR_DATA (1 << 8)
53 #define APP_CMD (1 << 5)
54 #define AKE_SEQ_ERROR (1 << 3)
55 #define OCR_CCS_BITN 30
59 sd_bc
= 0, /* broadcast -- no response */
60 sd_bcr
, /* broadcast with response */
61 sd_ac
, /* addressed -- no data transfer */
62 sd_adtc
, /* addressed with data transfer */
71 typedef struct SDState SDState
;
72 typedef struct SDBus SDBus
;
74 #define TYPE_SD_CARD "sd-card"
75 #define SD_CARD(obj) OBJECT_CHECK(SDState, (obj), TYPE_SD_CARD)
76 #define SD_CARD_CLASS(klass) \
77 OBJECT_CLASS_CHECK(SDCardClass, (klass), TYPE_SD_CARD)
78 #define SD_CARD_GET_CLASS(obj) \
79 OBJECT_GET_CLASS(SDCardClass, (obj), TYPE_SD_CARD)
83 DeviceClass parent_class
;
86 int (*do_command
)(SDState
*sd
, SDRequest
*req
, uint8_t *response
);
87 void (*write_data
)(SDState
*sd
, uint8_t value
);
88 uint8_t (*read_data
)(SDState
*sd
);
89 bool (*data_ready
)(SDState
*sd
);
90 void (*enable
)(SDState
*sd
, bool enable
);
91 bool (*get_inserted
)(SDState
*sd
);
92 bool (*get_readonly
)(SDState
*sd
);
95 #define TYPE_SD_BUS "sd-bus"
96 #define SD_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SD_BUS)
97 #define SD_BUS_CLASS(klass) OBJECT_CLASS_CHECK(SDBusClass, (klass), TYPE_SD_BUS)
98 #define SD_BUS_GET_CLASS(obj) OBJECT_GET_CLASS(SDBusClass, (obj), TYPE_SD_BUS)
106 BusClass parent_class
;
109 /* These methods are called by the SD device to notify the controller
110 * when the card insertion or readonly status changes
112 void (*set_inserted
)(DeviceState
*dev
, bool inserted
);
113 void (*set_readonly
)(DeviceState
*dev
, bool readonly
);
116 /* Legacy functions to be used only by non-qdevified callers */
117 SDState
*sd_init(BlockBackend
*bs
, bool is_spi
);
118 int sd_do_command(SDState
*sd
, SDRequest
*req
,
120 void sd_write_data(SDState
*sd
, uint8_t value
);
121 uint8_t sd_read_data(SDState
*sd
);
122 void sd_set_cb(SDState
*sd
, qemu_irq readonly
, qemu_irq insert
);
123 bool sd_data_ready(SDState
*sd
);
124 /* sd_enable should not be used -- it is only used on the nseries boards,
125 * where it is part of a broken implementation of the MMC card slot switch
126 * (there should be two card slots which are multiplexed to a single MMC
127 * controller, but instead we model it with one card and controller and
128 * disable the card when the second slot is selected, so it looks like the
129 * second slot is always empty).
131 void sd_enable(SDState
*sd
, bool enable
);
133 /* Functions to be used by qdevified callers (working via
134 * an SDBus rather than directly with SDState)
136 int sdbus_do_command(SDBus
*sd
, SDRequest
*req
, uint8_t *response
);
137 void sdbus_write_data(SDBus
*sd
, uint8_t value
);
138 uint8_t sdbus_read_data(SDBus
*sd
);
139 bool sdbus_data_ready(SDBus
*sd
);
140 bool sdbus_get_inserted(SDBus
*sd
);
141 bool sdbus_get_readonly(SDBus
*sd
);
143 /* Functions to be used by SD devices to report back to qdevified controllers */
144 void sdbus_set_inserted(SDBus
*sd
, bool inserted
);
145 void sdbus_set_readonly(SDBus
*sd
, bool inserted
);
147 #endif /* __hw_sd_h */