hw/char/cadence_uart.c

   1 /*
   2  * Device model for Cadence UART
   3  *
   4  * Reference: Xilinx Zynq 7000 reference manual
   5  *   - http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
   6  *   - Chapter 19 UART Controller
   7  *   - Appendix B for Register details
   8  *
   9  * Copyright (c) 2010 Xilinx Inc.
  10  * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com)
  11  * Copyright (c) 2012 PetaLogix Pty Ltd.
  12  * Written by Haibing Ma
  13  *            M.Habib
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License
  17  * as published by the Free Software Foundation; either version
  18  * 2 of the License, or (at your option) any later version.
  19  *
  20  * You should have received a copy of the GNU General Public License along
  21  * with this program; if not, see <http://www.gnu.org/licenses/>.
  22  */
  23
  24 #include "qemu/osdep.h"
  25 #include "hw/sysbus.h"
  26 #include "migration/vmstate.h"
  27 #include "chardev/char-fe.h"
  28 #include "chardev/char-serial.h"
  29 #include "qemu/timer.h"
  30 #include "qemu/log.h"
  31 #include "qemu/module.h"
  32 #include "hw/char/cadence_uart.h"
  33 #include "hw/irq.h"
  34 #include "hw/qdev-clock.h"
  35 #include "hw/qdev-properties-system.h"
  36 #include "trace.h"
  37
  38 #ifdef CADENCE_UART_ERR_DEBUG
  39 #define DB_PRINT(...) do { \
  40     fprintf(stderr,  ": %s: ", __func__); \
  41     fprintf(stderr, ## __VA_ARGS__); \
  42     } while (0)
  43 #else
  44     #define DB_PRINT(...)
  45 #endif
  46
  47 #define UART_SR_INTR_RTRIG     0x00000001
  48 #define UART_SR_INTR_REMPTY    0x00000002
  49 #define UART_SR_INTR_RFUL      0x00000004
  50 #define UART_SR_INTR_TEMPTY    0x00000008
  51 #define UART_SR_INTR_TFUL      0x00000010
  52 /* somewhat awkwardly, TTRIG is misaligned between SR and ISR */
  53 #define UART_SR_TTRIG          0x00002000
  54 #define UART_INTR_TTRIG        0x00000400
  55 /* bits fields in CSR that correlate to CISR. If any of these bits are set in
  56  * SR, then the same bit in CISR is set high too */
  57 #define UART_SR_TO_CISR_MASK   0x0000001F
  58
  59 #define UART_INTR_ROVR         0x00000020
  60 #define UART_INTR_FRAME        0x00000040
  61 #define UART_INTR_PARE         0x00000080
  62 #define UART_INTR_TIMEOUT      0x00000100
  63 #define UART_INTR_DMSI         0x00000200
  64 #define UART_INTR_TOVR         0x00001000
  65
  66 #define UART_SR_RACTIVE    0x00000400
  67 #define UART_SR_TACTIVE    0x00000800
  68 #define UART_SR_FDELT      0x00001000
  69
  70 #define UART_CR_RXRST       0x00000001
  71 #define UART_CR_TXRST       0x00000002
  72 #define UART_CR_RX_EN       0x00000004
  73 #define UART_CR_RX_DIS      0x00000008
  74 #define UART_CR_TX_EN       0x00000010
  75 #define UART_CR_TX_DIS      0x00000020
  76 #define UART_CR_RST_TO      0x00000040
  77 #define UART_CR_STARTBRK    0x00000080
  78 #define UART_CR_STOPBRK     0x00000100
  79
  80 #define UART_MR_CLKS            0x00000001
  81 #define UART_MR_CHRL            0x00000006
  82 #define UART_MR_CHRL_SH         1
  83 #define UART_MR_PAR             0x00000038
  84 #define UART_MR_PAR_SH          3
  85 #define UART_MR_NBSTOP          0x000000C0
  86 #define UART_MR_NBSTOP_SH       6
  87 #define UART_MR_CHMODE          0x00000300
  88 #define UART_MR_CHMODE_SH       8
  89 #define UART_MR_UCLKEN          0x00000400
  90 #define UART_MR_IRMODE          0x00000800
  91
  92 #define UART_DATA_BITS_6       (0x3 << UART_MR_CHRL_SH)
  93 #define UART_DATA_BITS_7       (0x2 << UART_MR_CHRL_SH)
  94 #define UART_PARITY_ODD        (0x1 << UART_MR_PAR_SH)
  95 #define UART_PARITY_EVEN       (0x0 << UART_MR_PAR_SH)
  96 #define UART_STOP_BITS_1       (0x3 << UART_MR_NBSTOP_SH)
  97 #define UART_STOP_BITS_2       (0x2 << UART_MR_NBSTOP_SH)
  98 #define NORMAL_MODE            (0x0 << UART_MR_CHMODE_SH)
  99 #define ECHO_MODE              (0x1 << UART_MR_CHMODE_SH)
 100 #define LOCAL_LOOPBACK         (0x2 << UART_MR_CHMODE_SH)
 101 #define REMOTE_LOOPBACK        (0x3 << UART_MR_CHMODE_SH)
 102
 103 #define UART_DEFAULT_REF_CLK (50 * 1000 * 1000)
 104
 105 #define R_CR       (0x00/4)
 106 #define R_MR       (0x04/4)
 107 #define R_IER      (0x08/4)
 108 #define R_IDR      (0x0C/4)
 109 #define R_IMR      (0x10/4)
 110 #define R_CISR     (0x14/4)
 111 #define R_BRGR     (0x18/4)
 112 #define R_RTOR     (0x1C/4)
 113 #define R_RTRIG    (0x20/4)
 114 #define R_MCR      (0x24/4)
 115 #define R_MSR      (0x28/4)
 116 #define R_SR       (0x2C/4)
 117 #define R_TX_RX    (0x30/4)
 118 #define R_BDIV     (0x34/4)
 119 #define R_FDEL     (0x38/4)
 120 #define R_PMIN     (0x3C/4)
 121 #define R_PWID     (0x40/4)
 122 #define R_TTRIG    (0x44/4)
 123
 124
 125 static void uart_update_status(CadenceUARTState *s)
 126 {
 127     s->r[R_SR] = 0;
 128
 129     s->r[R_SR] |= s->rx_count == CADENCE_UART_RX_FIFO_SIZE ? UART_SR_INTR_RFUL
 130                                                            : 0;
 131     s->r[R_SR] |= !s->rx_count ? UART_SR_INTR_REMPTY : 0;
 132     s->r[R_SR] |= s->rx_count >= s->r[R_RTRIG] ? UART_SR_INTR_RTRIG : 0;
 133
 134     s->r[R_SR] |= s->tx_count == CADENCE_UART_TX_FIFO_SIZE ? UART_SR_INTR_TFUL
 135                                                            : 0;
 136     s->r[R_SR] |= !s->tx_count ? UART_SR_INTR_TEMPTY : 0;
 137     s->r[R_SR] |= s->tx_count >= s->r[R_TTRIG] ? UART_SR_TTRIG : 0;
 138
 139     s->r[R_CISR] |= s->r[R_SR] & UART_SR_TO_CISR_MASK;
 140     s->r[R_CISR] |= s->r[R_SR] & UART_SR_TTRIG ? UART_INTR_TTRIG : 0;
 141     qemu_set_irq(s->irq, !!(s->r[R_IMR] & s->r[R_CISR]));
 142 }
 143
 144 static void fifo_trigger_update(void *opaque)
 145 {
 146     CadenceUARTState *s = opaque;
 147
 148     if (s->r[R_RTOR]) {
 149         s->r[R_CISR] |= UART_INTR_TIMEOUT;
 150         uart_update_status(s);
 151     }
 152 }
 153
 154 static void uart_rx_reset(CadenceUARTState *s)
 155 {
 156     s->rx_wpos = 0;
 157     s->rx_count = 0;
 158     qemu_chr_fe_accept_input(&s->chr);
 159 }
 160
 161 static void uart_tx_reset(CadenceUARTState *s)
 162 {
 163     s->tx_count = 0;
 164 }
 165
 166 static void uart_send_breaks(CadenceUARTState *s)
 167 {
 168     int break_enabled = 1;
 169
 170     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
 171                       &break_enabled);
 172 }
 173
 174 static void uart_parameters_setup(CadenceUARTState *s)
 175 {
 176     QEMUSerialSetParams ssp;
 177     unsigned int baud_rate, packet_size, input_clk;
 178     input_clk = clock_get_hz(s->refclk);
 179
 180     baud_rate = (s->r[R_MR] & UART_MR_CLKS) ? input_clk / 8 : input_clk;
 181     baud_rate /= (s->r[R_BRGR] * (s->r[R_BDIV] + 1));
 182     trace_cadence_uart_baudrate(baud_rate);
 183
 184     ssp.speed = baud_rate;
 185
 186     packet_size = 1;
 187
 188     switch (s->r[R_MR] & UART_MR_PAR) {
 189     case UART_PARITY_EVEN:
 190         ssp.parity = 'E';
 191         packet_size++;
 192         break;
 193     case UART_PARITY_ODD:
 194         ssp.parity = 'O';
 195         packet_size++;
 196         break;
 197     default:
 198         ssp.parity = 'N';
 199         break;
 200     }
 201
 202     switch (s->r[R_MR] & UART_MR_CHRL) {
 203     case UART_DATA_BITS_6:
 204         ssp.data_bits = 6;
 205         break;
 206     case UART_DATA_BITS_7:
 207         ssp.data_bits = 7;
 208         break;
 209     default:
 210         ssp.data_bits = 8;
 211         break;
 212     }
 213
 214     switch (s->r[R_MR] & UART_MR_NBSTOP) {
 215     case UART_STOP_BITS_1:
 216         ssp.stop_bits = 1;
 217         break;
 218     default:
 219         ssp.stop_bits = 2;
 220         break;
 221     }
 222
 223     packet_size += ssp.data_bits + ssp.stop_bits;
 224     if (ssp.speed == 0) {
 225         /*
 226          * Avoid division-by-zero below.
 227          * TODO: find something better
 228          */
 229         ssp.speed = 1;
 230     }
 231     s->char_tx_time = (NANOSECONDS_PER_SECOND / ssp.speed) * packet_size;
 232     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 233 }
 234
 235 static int uart_can_receive(void *opaque)
 236 {
 237     CadenceUARTState *s = opaque;
 238     int ret;
 239     uint32_t ch_mode;
 240
 241     /* ignore characters when unclocked or in reset */
 242     if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
 243         qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
 244                       __func__);
 245         return 0;
 246     }
 247
 248     ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE);
 249     ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 250
 251     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
 252         ret = MIN(ret, CADENCE_UART_RX_FIFO_SIZE - s->rx_count);
 253     }
 254     if (ch_mode == REMOTE_LOOPBACK || ch_mode == ECHO_MODE) {
 255         ret = MIN(ret, CADENCE_UART_TX_FIFO_SIZE - s->tx_count);
 256     }
 257     return ret;
 258 }
 259
 260 static void uart_ctrl_update(CadenceUARTState *s)
 261 {
 262     if (s->r[R_CR] & UART_CR_TXRST) {
 263         uart_tx_reset(s);
 264     }
 265
 266     if (s->r[R_CR] & UART_CR_RXRST) {
 267         uart_rx_reset(s);
 268     }
 269
 270     s->r[R_CR] &= ~(UART_CR_TXRST | UART_CR_RXRST);
 271
 272     if (s->r[R_CR] & UART_CR_STARTBRK && !(s->r[R_CR] & UART_CR_STOPBRK)) {
 273         uart_send_breaks(s);
 274     }
 275 }
 276
 277 static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
 278 {
 279     CadenceUARTState *s = opaque;
 280     uint64_t new_rx_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 281     int i;
 282
 283     if ((s->r[R_CR] & UART_CR_RX_DIS) || !(s->r[R_CR] & UART_CR_RX_EN)) {
 284         return;
 285     }
 286
 287     if (s->rx_count == CADENCE_UART_RX_FIFO_SIZE) {
 288         s->r[R_CISR] |= UART_INTR_ROVR;
 289     } else {
 290         for (i = 0; i < size; i++) {
 291             s->rx_fifo[s->rx_wpos] = buf[i];
 292             s->rx_wpos = (s->rx_wpos + 1) % CADENCE_UART_RX_FIFO_SIZE;
 293             s->rx_count++;
 294         }
 295         timer_mod(s->fifo_trigger_handle, new_rx_time +
 296                                                 (s->char_tx_time * 4));
 297     }
 298     uart_update_status(s);
 299 }
 300
 301 static gboolean cadence_uart_xmit(void *do_not_use, GIOCondition cond,
 302                                   void *opaque)
 303 {
 304     CadenceUARTState *s = opaque;
 305     int ret;
 306
 307     /* instant drain the fifo when there's no back-end */
 308     if (!qemu_chr_fe_backend_connected(&s->chr)) {
 309         s->tx_count = 0;
 310         return G_SOURCE_REMOVE;
 311     }
 312
 313     if (!s->tx_count) {
 314         return G_SOURCE_REMOVE;
 315     }
 316
 317     ret = qemu_chr_fe_write(&s->chr, s->tx_fifo, s->tx_count);
 318
 319     if (ret >= 0) {
 320         s->tx_count -= ret;
 321         memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_count);
 322     }
 323
 324     if (s->tx_count) {
 325         guint r = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
 326                                         cadence_uart_xmit, s);
 327         if (!r) {
 328             s->tx_count = 0;
 329             return G_SOURCE_REMOVE;
 330         }
 331     }
 332
 333     uart_update_status(s);
 334     return G_SOURCE_REMOVE;
 335 }
 336
 337 static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf,
 338                                int size)
 339 {
 340     if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) {
 341         return;
 342     }
 343
 344     if (size > CADENCE_UART_TX_FIFO_SIZE - s->tx_count) {
 345         size = CADENCE_UART_TX_FIFO_SIZE - s->tx_count;
 346         /*
 347          * This can only be a guest error via a bad tx fifo register push,
 348          * as can_receive() should stop remote loop and echo modes ever getting
 349          * us to here.
 350          */
 351         qemu_log_mask(LOG_GUEST_ERROR, "cadence_uart: TxFIFO overflow");
 352         s->r[R_CISR] |= UART_INTR_ROVR;
 353     }
 354
 355     memcpy(s->tx_fifo + s->tx_count, buf, size);
 356     s->tx_count += size;
 357
 358     cadence_uart_xmit(NULL, G_IO_OUT, s);
 359 }
 360
 361 static void uart_receive(void *opaque, const uint8_t *buf, int size)
 362 {
 363     CadenceUARTState *s = opaque;
 364     uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 365
 366     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
 367         uart_write_rx_fifo(opaque, buf, size);
 368     }
 369     if (ch_mode == REMOTE_LOOPBACK || ch_mode == ECHO_MODE) {
 370         uart_write_tx_fifo(s, buf, size);
 371     }
 372 }
 373
 374 static void uart_event(void *opaque, QEMUChrEvent event)
 375 {
 376     CadenceUARTState *s = opaque;
 377     uint8_t buf = '\0';
 378
 379     /* ignore characters when unclocked or in reset */
 380     if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
 381         qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
 382                       __func__);
 383         return;
 384     }
 385
 386     if (event == CHR_EVENT_BREAK) {
 387         uart_write_rx_fifo(opaque, &buf, 1);
 388     }
 389
 390     uart_update_status(s);
 391 }
 392
 393 static void uart_read_rx_fifo(CadenceUARTState *s, uint32_t *c)
 394 {
 395     if ((s->r[R_CR] & UART_CR_RX_DIS) || !(s->r[R_CR] & UART_CR_RX_EN)) {
 396         return;
 397     }
 398
 399     if (s->rx_count) {
 400         uint32_t rx_rpos = (CADENCE_UART_RX_FIFO_SIZE + s->rx_wpos -
 401                             s->rx_count) % CADENCE_UART_RX_FIFO_SIZE;
 402         *c = s->rx_fifo[rx_rpos];
 403         s->rx_count--;
 404
 405         qemu_chr_fe_accept_input(&s->chr);
 406     } else {
 407         *c = 0;
 408     }
 409
 410     uart_update_status(s);
 411 }
 412
 413 static MemTxResult uart_write(void *opaque, hwaddr offset,
 414                               uint64_t value, unsigned size, MemTxAttrs attrs)
 415 {
 416     CadenceUARTState *s = opaque;
 417
 418     /* ignore access when unclocked or in reset */
 419     if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
 420         qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
 421                       __func__);
 422         return MEMTX_ERROR;
 423     }
 424
 425     DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value);
 426     offset >>= 2;
 427     if (offset >= CADENCE_UART_R_MAX) {
 428         return MEMTX_DECODE_ERROR;
 429     }
 430     switch (offset) {
 431     case R_IER: /* ier (wts imr) */
 432         s->r[R_IMR] |= value;
 433         break;
 434     case R_IDR: /* idr (wtc imr) */
 435         s->r[R_IMR] &= ~value;
 436         break;
 437     case R_IMR: /* imr (read only) */
 438         break;
 439     case R_CISR: /* cisr (wtc) */
 440         s->r[R_CISR] &= ~value;
 441         break;
 442     case R_TX_RX: /* UARTDR */
 443         switch (s->r[R_MR] & UART_MR_CHMODE) {
 444         case NORMAL_MODE:
 445             uart_write_tx_fifo(s, (uint8_t *) &value, 1);
 446             break;
 447         case LOCAL_LOOPBACK:
 448             uart_write_rx_fifo(opaque, (uint8_t *) &value, 1);
 449             break;
 450         }
 451         break;
 452     case R_BRGR: /* Baud rate generator */
 453         value &= 0xffff;
 454         if (value >= 0x01) {
 455             s->r[offset] = value;
 456         }
 457         break;
 458     case R_BDIV:    /* Baud rate divider */
 459         value &= 0xff;
 460         if (value >= 0x04) {
 461             s->r[offset] = value;
 462         }
 463         break;
 464     default:
 465         s->r[offset] = value;
 466     }
 467
 468     switch (offset) {
 469     case R_CR:
 470         uart_ctrl_update(s);
 471         break;
 472     case R_MR:
 473         uart_parameters_setup(s);
 474         break;
 475     }
 476     uart_update_status(s);
 477
 478     return MEMTX_OK;
 479 }
 480
 481 static MemTxResult uart_read(void *opaque, hwaddr offset,
 482                              uint64_t *value, unsigned size, MemTxAttrs attrs)
 483 {
 484     CadenceUARTState *s = opaque;
 485     uint32_t c = 0;
 486
 487     /* ignore access when unclocked or in reset */
 488     if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) {
 489         qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n",
 490                       __func__);
 491         return MEMTX_ERROR;
 492     }
 493
 494     offset >>= 2;
 495     if (offset >= CADENCE_UART_R_MAX) {
 496         return MEMTX_DECODE_ERROR;
 497     }
 498     if (offset == R_TX_RX) {
 499         uart_read_rx_fifo(s, &c);
 500     } else {
 501         c = s->r[offset];
 502     }
 503
 504     DB_PRINT(" offset:%x data:%08x\n", (unsigned)(offset << 2), (unsigned)c);
 505     *value = c;
 506     return MEMTX_OK;
 507 }
 508
 509 static const MemoryRegionOps uart_ops = {
 510     .read_with_attrs = uart_read,
 511     .write_with_attrs = uart_write,
 512     .endianness = DEVICE_NATIVE_ENDIAN,
 513 };
 514
 515 static void cadence_uart_reset_init(Object *obj, ResetType type)
 516 {
 517     CadenceUARTState *s = CADENCE_UART(obj);
 518
 519     s->r[R_CR] = 0x00000128;
 520     s->r[R_IMR] = 0;
 521     s->r[R_CISR] = 0;
 522     s->r[R_RTRIG] = 0x00000020;
 523     s->r[R_BRGR] = 0x0000028B;
 524     s->r[R_BDIV] = 0x0000000F;
 525     s->r[R_TTRIG] = 0x00000020;
 526 }
 527
 528 static void cadence_uart_reset_hold(Object *obj, ResetType type)
 529 {
 530     CadenceUARTState *s = CADENCE_UART(obj);
 531
 532     uart_rx_reset(s);
 533     uart_tx_reset(s);
 534
 535     uart_update_status(s);
 536 }
 537
 538 static void cadence_uart_realize(DeviceState *dev, Error **errp)
 539 {
 540     CadenceUARTState *s = CADENCE_UART(dev);
 541
 542     s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL,
 543                                           fifo_trigger_update, s);
 544
 545     qemu_chr_fe_set_handlers(&s->chr, uart_can_receive, uart_receive,
 546                              uart_event, NULL, s, NULL, true);
 547 }
 548
 549 static void cadence_uart_refclk_update(void *opaque, ClockEvent event)
 550 {
 551     CadenceUARTState *s = opaque;
 552
 553     /* recompute uart's speed on clock change */
 554     uart_parameters_setup(s);
 555 }
 556
 557 static void cadence_uart_init(Object *obj)
 558 {
 559     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 560     CadenceUARTState *s = CADENCE_UART(obj);
 561
 562     memory_region_init_io(&s->iomem, obj, &uart_ops, s, "uart", 0x1000);
 563     sysbus_init_mmio(sbd, &s->iomem);
 564     sysbus_init_irq(sbd, &s->irq);
 565
 566     s->refclk = qdev_init_clock_in(DEVICE(obj), "refclk",
 567                                    cadence_uart_refclk_update, s, ClockUpdate);
 568     /* initialize the frequency in case the clock remains unconnected */
 569     clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
 570
 571     s->char_tx_time = (NANOSECONDS_PER_SECOND / 9600) * 10;
 572 }
 573
 574 static int cadence_uart_pre_load(void *opaque)
 575 {
 576     CadenceUARTState *s = opaque;
 577
 578     /* the frequency will be overridden if the refclk field is present */
 579     clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK);
 580     return 0;
 581 }
 582
 583 static int cadence_uart_post_load(void *opaque, int version_id)
 584 {
 585     CadenceUARTState *s = opaque;
 586
 587     /* Ensure these two aren't invalid numbers */
 588     if (s->r[R_BRGR] < 1 || s->r[R_BRGR] & ~0xFFFF ||
 589         s->r[R_BDIV] <= 3 || s->r[R_BDIV] & ~0xFF) {
 590         /* Value is invalid, abort */
 591         return 1;
 592     }
 593
 594     uart_parameters_setup(s);
 595     uart_update_status(s);
 596     return 0;
 597 }
 598
 599 static const VMStateDescription vmstate_cadence_uart = {
 600     .name = "cadence_uart",
 601     .version_id = 3,
 602     .minimum_version_id = 2,
 603     .pre_load = cadence_uart_pre_load,
 604     .post_load = cadence_uart_post_load,
 605     .fields = (const VMStateField[]) {
 606         VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX),
 607         VMSTATE_UINT8_ARRAY(rx_fifo, CadenceUARTState,
 608                             CADENCE_UART_RX_FIFO_SIZE),
 609         VMSTATE_UINT8_ARRAY(tx_fifo, CadenceUARTState,
 610                             CADENCE_UART_TX_FIFO_SIZE),
 611         VMSTATE_UINT32(rx_count, CadenceUARTState),
 612         VMSTATE_UINT32(tx_count, CadenceUARTState),
 613         VMSTATE_UINT32(rx_wpos, CadenceUARTState),
 614         VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState),
 615         VMSTATE_CLOCK_V(refclk, CadenceUARTState, 3),
 616         VMSTATE_END_OF_LIST()
 617     },
 618 };
 619
 620 static Property cadence_uart_properties[] = {
 621     DEFINE_PROP_CHR("chardev", CadenceUARTState, chr),
 622     DEFINE_PROP_END_OF_LIST(),
 623 };
 624
 625 static void cadence_uart_class_init(ObjectClass *klass, void *data)
 626 {
 627     DeviceClass *dc = DEVICE_CLASS(klass);
 628     ResettableClass *rc = RESETTABLE_CLASS(klass);
 629
 630     dc->realize = cadence_uart_realize;
 631     dc->vmsd = &vmstate_cadence_uart;
 632     rc->phases.enter = cadence_uart_reset_init;
 633     rc->phases.hold  = cadence_uart_reset_hold;
 634     device_class_set_props(dc, cadence_uart_properties);
 635   }
 636
 637 static const TypeInfo cadence_uart_info = {
 638     .name          = TYPE_CADENCE_UART,
 639     .parent        = TYPE_SYS_BUS_DEVICE,
 640     .instance_size = sizeof(CadenceUARTState),
 641     .instance_init = cadence_uart_init,
 642     .class_init    = cadence_uart_class_init,
 643 };
 644
 645 static void cadence_uart_register_types(void)
 646 {
 647     type_register_static(&cadence_uart_info);
 648 }
 649
 650 type_init(cadence_uart_register_types)