pseries: Update SLOF
[qemu/kevin.git] / hw / esp.h
blobfa855e2fdf3f1473845dcda06b127d4cbe2b2a69
1 #ifndef QEMU_HW_ESP_H
2 #define QEMU_HW_ESP_H
4 #include "scsi.h"
6 /* esp.c */
7 #define ESP_MAX_DEVS 7
8 typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len);
9 void esp_init(target_phys_addr_t espaddr, int it_shift,
10 ESPDMAMemoryReadWriteFunc dma_memory_read,
11 ESPDMAMemoryReadWriteFunc dma_memory_write,
12 void *dma_opaque, qemu_irq irq, qemu_irq *reset,
13 qemu_irq *dma_enable);
15 #define ESP_REGS 16
16 #define TI_BUFSZ 16
18 typedef struct ESPState ESPState;
20 struct ESPState {
21 uint8_t rregs[ESP_REGS];
22 uint8_t wregs[ESP_REGS];
23 qemu_irq irq;
24 uint8_t chip_id;
25 int32_t ti_size;
26 uint32_t ti_rptr, ti_wptr;
27 uint32_t status;
28 uint32_t dma;
29 uint8_t ti_buf[TI_BUFSZ];
30 SCSIBus bus;
31 SCSIDevice *current_dev;
32 SCSIRequest *current_req;
33 uint8_t cmdbuf[TI_BUFSZ];
34 uint32_t cmdlen;
35 uint32_t do_cmd;
37 /* The amount of data left in the current DMA transfer. */
38 uint32_t dma_left;
39 /* The size of the current DMA transfer. Zero if no transfer is in
40 progress. */
41 uint32_t dma_counter;
42 int dma_enabled;
44 uint32_t async_len;
45 uint8_t *async_buf;
47 ESPDMAMemoryReadWriteFunc dma_memory_read;
48 ESPDMAMemoryReadWriteFunc dma_memory_write;
49 void *dma_opaque;
50 void (*dma_cb)(ESPState *s);
53 #define ESP_TCLO 0x0
54 #define ESP_TCMID 0x1
55 #define ESP_FIFO 0x2
56 #define ESP_CMD 0x3
57 #define ESP_RSTAT 0x4
58 #define ESP_WBUSID 0x4
59 #define ESP_RINTR 0x5
60 #define ESP_WSEL 0x5
61 #define ESP_RSEQ 0x6
62 #define ESP_WSYNTP 0x6
63 #define ESP_RFLAGS 0x7
64 #define ESP_WSYNO 0x7
65 #define ESP_CFG1 0x8
66 #define ESP_RRES1 0x9
67 #define ESP_WCCF 0x9
68 #define ESP_RRES2 0xa
69 #define ESP_WTEST 0xa
70 #define ESP_CFG2 0xb
71 #define ESP_CFG3 0xc
72 #define ESP_RES3 0xd
73 #define ESP_TCHI 0xe
74 #define ESP_RES4 0xf
76 #define CMD_DMA 0x80
77 #define CMD_CMD 0x7f
79 #define CMD_NOP 0x00
80 #define CMD_FLUSH 0x01
81 #define CMD_RESET 0x02
82 #define CMD_BUSRESET 0x03
83 #define CMD_TI 0x10
84 #define CMD_ICCS 0x11
85 #define CMD_MSGACC 0x12
86 #define CMD_PAD 0x18
87 #define CMD_SATN 0x1a
88 #define CMD_RSTATN 0x1b
89 #define CMD_SEL 0x41
90 #define CMD_SELATN 0x42
91 #define CMD_SELATNS 0x43
92 #define CMD_ENSEL 0x44
93 #define CMD_DISSEL 0x45
95 #define STAT_DO 0x00
96 #define STAT_DI 0x01
97 #define STAT_CD 0x02
98 #define STAT_ST 0x03
99 #define STAT_MO 0x06
100 #define STAT_MI 0x07
101 #define STAT_PIO_MASK 0x06
103 #define STAT_TC 0x10
104 #define STAT_PE 0x20
105 #define STAT_GE 0x40
106 #define STAT_INT 0x80
108 #define BUSID_DID 0x07
110 #define INTR_FC 0x08
111 #define INTR_BS 0x10
112 #define INTR_DC 0x20
113 #define INTR_RST 0x80
115 #define SEQ_0 0x0
116 #define SEQ_CD 0x4
118 #define CFG1_RESREPT 0x40
120 #define TCHI_FAS100A 0x4
121 #define TCHI_AM53C974 0x12
123 void esp_dma_enable(ESPState *s, int irq, int level);
124 void esp_request_cancelled(SCSIRequest *req);
125 void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid);
126 void esp_transfer_data(SCSIRequest *req, uint32_t len);
127 void esp_hard_reset(ESPState *s);
128 uint64_t esp_reg_read(ESPState *s, uint32_t saddr);
129 void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val);
130 extern const VMStateDescription vmstate_esp;
132 #endif