tpm: Support for TIS selftest done flag
[qemu/cris-port.git] / hw / sd / sdhci.c
blob27b914aa94d94f3dd3b0d97c881dab2d4f7a44ea
1 /*
2 * SD Association Host Standard Specification v2.0 controller emulation
4 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
5 * Mitsyanko Igor <i.mitsyanko@samsung.com>
6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
8 * Based on MMC controller for Samsung S5PC1xx-based board emulation
9 * by Alexey Merkulov and Vladimir Monakhov.
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
19 * See the GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License along
22 * with this program; if not, see <http://www.gnu.org/licenses/>.
25 #include "hw/hw.h"
26 #include "sysemu/block-backend.h"
27 #include "sysemu/blockdev.h"
28 #include "sysemu/dma.h"
29 #include "qemu/timer.h"
30 #include "qemu/bitops.h"
32 #include "sdhci.h"
34 /* host controller debug messages */
35 #ifndef SDHC_DEBUG
36 #define SDHC_DEBUG 0
37 #endif
39 #if SDHC_DEBUG == 0
40 #define DPRINT_L1(fmt, args...) do { } while (0)
41 #define DPRINT_L2(fmt, args...) do { } while (0)
42 #define ERRPRINT(fmt, args...) do { } while (0)
43 #elif SDHC_DEBUG == 1
44 #define DPRINT_L1(fmt, args...) \
45 do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0)
46 #define DPRINT_L2(fmt, args...) do { } while (0)
47 #define ERRPRINT(fmt, args...) \
48 do {fprintf(stderr, "QEMU SDHC ERROR: "fmt, ## args); } while (0)
49 #else
50 #define DPRINT_L1(fmt, args...) \
51 do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0)
52 #define DPRINT_L2(fmt, args...) \
53 do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0)
54 #define ERRPRINT(fmt, args...) \
55 do {fprintf(stderr, "QEMU SDHC ERROR: "fmt, ## args); } while (0)
56 #endif
58 /* Default SD/MMC host controller features information, which will be
59 * presented in CAPABILITIES register of generic SD host controller at reset.
60 * If not stated otherwise:
61 * 0 - not supported, 1 - supported, other - prohibited.
63 #define SDHC_CAPAB_64BITBUS 0ul /* 64-bit System Bus Support */
64 #define SDHC_CAPAB_18V 1ul /* Voltage support 1.8v */
65 #define SDHC_CAPAB_30V 0ul /* Voltage support 3.0v */
66 #define SDHC_CAPAB_33V 1ul /* Voltage support 3.3v */
67 #define SDHC_CAPAB_SUSPRESUME 0ul /* Suspend/resume support */
68 #define SDHC_CAPAB_SDMA 1ul /* SDMA support */
69 #define SDHC_CAPAB_HIGHSPEED 1ul /* High speed support */
70 #define SDHC_CAPAB_ADMA1 1ul /* ADMA1 support */
71 #define SDHC_CAPAB_ADMA2 1ul /* ADMA2 support */
72 /* Maximum host controller R/W buffers size
73 * Possible values: 512, 1024, 2048 bytes */
74 #define SDHC_CAPAB_MAXBLOCKLENGTH 512ul
75 /* Maximum clock frequency for SDclock in MHz
76 * value in range 10-63 MHz, 0 - not defined */
77 #define SDHC_CAPAB_BASECLKFREQ 52ul
78 #define SDHC_CAPAB_TOUNIT 1ul /* Timeout clock unit 0 - kHz, 1 - MHz */
79 /* Timeout clock frequency 1-63, 0 - not defined */
80 #define SDHC_CAPAB_TOCLKFREQ 52ul
82 /* Now check all parameters and calculate CAPABILITIES REGISTER value */
83 #if SDHC_CAPAB_64BITBUS > 1 || SDHC_CAPAB_18V > 1 || SDHC_CAPAB_30V > 1 || \
84 SDHC_CAPAB_33V > 1 || SDHC_CAPAB_SUSPRESUME > 1 || SDHC_CAPAB_SDMA > 1 || \
85 SDHC_CAPAB_HIGHSPEED > 1 || SDHC_CAPAB_ADMA2 > 1 || SDHC_CAPAB_ADMA1 > 1 ||\
86 SDHC_CAPAB_TOUNIT > 1
87 #error Capabilities features can have value 0 or 1 only!
88 #endif
90 #if SDHC_CAPAB_MAXBLOCKLENGTH == 512
91 #define MAX_BLOCK_LENGTH 0ul
92 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 1024
93 #define MAX_BLOCK_LENGTH 1ul
94 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 2048
95 #define MAX_BLOCK_LENGTH 2ul
96 #else
97 #error Max host controller block size can have value 512, 1024 or 2048 only!
98 #endif
100 #if (SDHC_CAPAB_BASECLKFREQ > 0 && SDHC_CAPAB_BASECLKFREQ < 10) || \
101 SDHC_CAPAB_BASECLKFREQ > 63
102 #error SDclock frequency can have value in range 0, 10-63 only!
103 #endif
105 #if SDHC_CAPAB_TOCLKFREQ > 63
106 #error Timeout clock frequency can have value in range 0-63 only!
107 #endif
109 #define SDHC_CAPAB_REG_DEFAULT \
110 ((SDHC_CAPAB_64BITBUS << 28) | (SDHC_CAPAB_18V << 26) | \
111 (SDHC_CAPAB_30V << 25) | (SDHC_CAPAB_33V << 24) | \
112 (SDHC_CAPAB_SUSPRESUME << 23) | (SDHC_CAPAB_SDMA << 22) | \
113 (SDHC_CAPAB_HIGHSPEED << 21) | (SDHC_CAPAB_ADMA1 << 20) | \
114 (SDHC_CAPAB_ADMA2 << 19) | (MAX_BLOCK_LENGTH << 16) | \
115 (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \
116 (SDHC_CAPAB_TOCLKFREQ))
118 #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val))
120 static uint8_t sdhci_slotint(SDHCIState *s)
122 return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) ||
123 ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) ||
124 ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV));
127 static inline void sdhci_update_irq(SDHCIState *s)
129 qemu_set_irq(s->irq, sdhci_slotint(s));
132 static void sdhci_raise_insertion_irq(void *opaque)
134 SDHCIState *s = (SDHCIState *)opaque;
136 if (s->norintsts & SDHC_NIS_REMOVE) {
137 timer_mod(s->insert_timer,
138 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
139 } else {
140 s->prnsts = 0x1ff0000;
141 if (s->norintstsen & SDHC_NISEN_INSERT) {
142 s->norintsts |= SDHC_NIS_INSERT;
144 sdhci_update_irq(s);
148 static void sdhci_insert_eject_cb(void *opaque, int irq, int level)
150 SDHCIState *s = (SDHCIState *)opaque;
151 DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject");
153 if ((s->norintsts & SDHC_NIS_REMOVE) && level) {
154 /* Give target some time to notice card ejection */
155 timer_mod(s->insert_timer,
156 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
157 } else {
158 if (level) {
159 s->prnsts = 0x1ff0000;
160 if (s->norintstsen & SDHC_NISEN_INSERT) {
161 s->norintsts |= SDHC_NIS_INSERT;
163 } else {
164 s->prnsts = 0x1fa0000;
165 s->pwrcon &= ~SDHC_POWER_ON;
166 s->clkcon &= ~SDHC_CLOCK_SDCLK_EN;
167 if (s->norintstsen & SDHC_NISEN_REMOVE) {
168 s->norintsts |= SDHC_NIS_REMOVE;
171 sdhci_update_irq(s);
175 static void sdhci_card_readonly_cb(void *opaque, int irq, int level)
177 SDHCIState *s = (SDHCIState *)opaque;
179 if (level) {
180 s->prnsts &= ~SDHC_WRITE_PROTECT;
181 } else {
182 /* Write enabled */
183 s->prnsts |= SDHC_WRITE_PROTECT;
187 static void sdhci_reset(SDHCIState *s)
189 timer_del(s->insert_timer);
190 timer_del(s->transfer_timer);
191 /* Set all registers to 0. Capabilities registers are not cleared
192 * and assumed to always preserve their value, given to them during
193 * initialization */
194 memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
196 sd_set_cb(s->card, s->ro_cb, s->eject_cb);
197 s->data_count = 0;
198 s->stopped_state = sdhc_not_stopped;
201 static void sdhci_data_transfer(void *opaque);
203 static void sdhci_send_command(SDHCIState *s)
205 SDRequest request;
206 uint8_t response[16];
207 int rlen;
209 s->errintsts = 0;
210 s->acmd12errsts = 0;
211 request.cmd = s->cmdreg >> 8;
212 request.arg = s->argument;
213 DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg);
214 rlen = sd_do_command(s->card, &request, response);
216 if (s->cmdreg & SDHC_CMD_RESPONSE) {
217 if (rlen == 4) {
218 s->rspreg[0] = (response[0] << 24) | (response[1] << 16) |
219 (response[2] << 8) | response[3];
220 s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
221 DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]);
222 } else if (rlen == 16) {
223 s->rspreg[0] = (response[11] << 24) | (response[12] << 16) |
224 (response[13] << 8) | response[14];
225 s->rspreg[1] = (response[7] << 24) | (response[8] << 16) |
226 (response[9] << 8) | response[10];
227 s->rspreg[2] = (response[3] << 24) | (response[4] << 16) |
228 (response[5] << 8) | response[6];
229 s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
230 response[2];
231 DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.."
232 "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n",
233 s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]);
234 } else {
235 ERRPRINT("Timeout waiting for command response\n");
236 if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) {
237 s->errintsts |= SDHC_EIS_CMDTIMEOUT;
238 s->norintsts |= SDHC_NIS_ERR;
242 if ((s->norintstsen & SDHC_NISEN_TRSCMP) &&
243 (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) {
244 s->norintsts |= SDHC_NIS_TRSCMP;
246 } else if (rlen != 0 && (s->errintstsen & SDHC_EISEN_CMDIDX)) {
247 s->errintsts |= SDHC_EIS_CMDIDX;
248 s->norintsts |= SDHC_NIS_ERR;
251 if (s->norintstsen & SDHC_NISEN_CMDCMP) {
252 s->norintsts |= SDHC_NIS_CMDCMP;
255 sdhci_update_irq(s);
257 if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) {
258 s->data_count = 0;
259 sdhci_data_transfer(s);
263 static void sdhci_end_transfer(SDHCIState *s)
265 /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */
266 if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) {
267 SDRequest request;
268 uint8_t response[16];
270 request.cmd = 0x0C;
271 request.arg = 0;
272 DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg);
273 sd_do_command(s->card, &request, response);
274 /* Auto CMD12 response goes to the upper Response register */
275 s->rspreg[3] = (response[0] << 24) | (response[1] << 16) |
276 (response[2] << 8) | response[3];
279 s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE |
280 SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT |
281 SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE);
283 if (s->norintstsen & SDHC_NISEN_TRSCMP) {
284 s->norintsts |= SDHC_NIS_TRSCMP;
287 sdhci_update_irq(s);
291 * Programmed i/o data transfer
294 /* Fill host controller's read buffer with BLKSIZE bytes of data from card */
295 static void sdhci_read_block_from_card(SDHCIState *s)
297 int index = 0;
299 if ((s->trnmod & SDHC_TRNS_MULTI) &&
300 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
301 return;
304 for (index = 0; index < (s->blksize & 0x0fff); index++) {
305 s->fifo_buffer[index] = sd_read_data(s->card);
308 /* New data now available for READ through Buffer Port Register */
309 s->prnsts |= SDHC_DATA_AVAILABLE;
310 if (s->norintstsen & SDHC_NISEN_RBUFRDY) {
311 s->norintsts |= SDHC_NIS_RBUFRDY;
314 /* Clear DAT line active status if that was the last block */
315 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
316 ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) {
317 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
320 /* If stop at block gap request was set and it's not the last block of
321 * data - generate Block Event interrupt */
322 if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) &&
323 s->blkcnt != 1) {
324 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
325 if (s->norintstsen & SDHC_EISEN_BLKGAP) {
326 s->norintsts |= SDHC_EIS_BLKGAP;
330 sdhci_update_irq(s);
333 /* Read @size byte of data from host controller @s BUFFER DATA PORT register */
334 static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
336 uint32_t value = 0;
337 int i;
339 /* first check that a valid data exists in host controller input buffer */
340 if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) {
341 ERRPRINT("Trying to read from empty buffer\n");
342 return 0;
345 for (i = 0; i < size; i++) {
346 value |= s->fifo_buffer[s->data_count] << i * 8;
347 s->data_count++;
348 /* check if we've read all valid data (blksize bytes) from buffer */
349 if ((s->data_count) >= (s->blksize & 0x0fff)) {
350 DPRINT_L2("All %u bytes of data have been read from input buffer\n",
351 s->data_count);
352 s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
353 s->data_count = 0; /* next buff read must start at position [0] */
355 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
356 s->blkcnt--;
359 /* if that was the last block of data */
360 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
361 ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) ||
362 /* stop at gap request */
363 (s->stopped_state == sdhc_gap_read &&
364 !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) {
365 sdhci_end_transfer(s);
366 } else { /* if there are more data, read next block from card */
367 sdhci_read_block_from_card(s);
369 break;
373 return value;
376 /* Write data from host controller FIFO to card */
377 static void sdhci_write_block_to_card(SDHCIState *s)
379 int index = 0;
381 if (s->prnsts & SDHC_SPACE_AVAILABLE) {
382 if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
383 s->norintsts |= SDHC_NIS_WBUFRDY;
385 sdhci_update_irq(s);
386 return;
389 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
390 if (s->blkcnt == 0) {
391 return;
392 } else {
393 s->blkcnt--;
397 for (index = 0; index < (s->blksize & 0x0fff); index++) {
398 sd_write_data(s->card, s->fifo_buffer[index]);
401 /* Next data can be written through BUFFER DATORT register */
402 s->prnsts |= SDHC_SPACE_AVAILABLE;
404 /* Finish transfer if that was the last block of data */
405 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
406 ((s->trnmod & SDHC_TRNS_MULTI) &&
407 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) {
408 sdhci_end_transfer(s);
409 } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
410 s->norintsts |= SDHC_NIS_WBUFRDY;
413 /* Generate Block Gap Event if requested and if not the last block */
414 if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) &&
415 s->blkcnt > 0) {
416 s->prnsts &= ~SDHC_DOING_WRITE;
417 if (s->norintstsen & SDHC_EISEN_BLKGAP) {
418 s->norintsts |= SDHC_EIS_BLKGAP;
420 sdhci_end_transfer(s);
423 sdhci_update_irq(s);
426 /* Write @size bytes of @value data to host controller @s Buffer Data Port
427 * register */
428 static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
430 unsigned i;
432 /* Check that there is free space left in a buffer */
433 if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) {
434 ERRPRINT("Can't write to data buffer: buffer full\n");
435 return;
438 for (i = 0; i < size; i++) {
439 s->fifo_buffer[s->data_count] = value & 0xFF;
440 s->data_count++;
441 value >>= 8;
442 if (s->data_count >= (s->blksize & 0x0fff)) {
443 DPRINT_L2("write buffer filled with %u bytes of data\n",
444 s->data_count);
445 s->data_count = 0;
446 s->prnsts &= ~SDHC_SPACE_AVAILABLE;
447 if (s->prnsts & SDHC_DOING_WRITE) {
448 sdhci_write_block_to_card(s);
455 * Single DMA data transfer
458 /* Multi block SDMA transfer */
459 static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
461 bool page_aligned = false;
462 unsigned int n, begin;
463 const uint16_t block_size = s->blksize & 0x0fff;
464 uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12);
465 uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
467 /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for
468 * possible stop at page boundary if initial address is not page aligned,
469 * allow them to work properly */
470 if ((s->sdmasysad % boundary_chk) == 0) {
471 page_aligned = true;
474 if (s->trnmod & SDHC_TRNS_READ) {
475 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
476 SDHC_DAT_LINE_ACTIVE;
477 while (s->blkcnt) {
478 if (s->data_count == 0) {
479 for (n = 0; n < block_size; n++) {
480 s->fifo_buffer[n] = sd_read_data(s->card);
483 begin = s->data_count;
484 if (((boundary_count + begin) < block_size) && page_aligned) {
485 s->data_count = boundary_count + begin;
486 boundary_count = 0;
487 } else {
488 s->data_count = block_size;
489 boundary_count -= block_size - begin;
490 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
491 s->blkcnt--;
494 dma_memory_write(&address_space_memory, s->sdmasysad,
495 &s->fifo_buffer[begin], s->data_count - begin);
496 s->sdmasysad += s->data_count - begin;
497 if (s->data_count == block_size) {
498 s->data_count = 0;
500 if (page_aligned && boundary_count == 0) {
501 break;
504 } else {
505 s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT |
506 SDHC_DAT_LINE_ACTIVE;
507 while (s->blkcnt) {
508 begin = s->data_count;
509 if (((boundary_count + begin) < block_size) && page_aligned) {
510 s->data_count = boundary_count + begin;
511 boundary_count = 0;
512 } else {
513 s->data_count = block_size;
514 boundary_count -= block_size - begin;
516 dma_memory_read(&address_space_memory, s->sdmasysad,
517 &s->fifo_buffer[begin], s->data_count);
518 s->sdmasysad += s->data_count - begin;
519 if (s->data_count == block_size) {
520 for (n = 0; n < block_size; n++) {
521 sd_write_data(s->card, s->fifo_buffer[n]);
523 s->data_count = 0;
524 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
525 s->blkcnt--;
528 if (page_aligned && boundary_count == 0) {
529 break;
534 if (s->blkcnt == 0) {
535 sdhci_end_transfer(s);
536 } else {
537 if (s->norintstsen & SDHC_NISEN_DMA) {
538 s->norintsts |= SDHC_NIS_DMA;
540 sdhci_update_irq(s);
544 /* single block SDMA transfer */
546 static void sdhci_sdma_transfer_single_block(SDHCIState *s)
548 int n;
549 uint32_t datacnt = s->blksize & 0x0fff;
551 if (s->trnmod & SDHC_TRNS_READ) {
552 for (n = 0; n < datacnt; n++) {
553 s->fifo_buffer[n] = sd_read_data(s->card);
555 dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer,
556 datacnt);
557 } else {
558 dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer,
559 datacnt);
560 for (n = 0; n < datacnt; n++) {
561 sd_write_data(s->card, s->fifo_buffer[n]);
565 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
566 s->blkcnt--;
569 sdhci_end_transfer(s);
572 typedef struct ADMADescr {
573 hwaddr addr;
574 uint16_t length;
575 uint8_t attr;
576 uint8_t incr;
577 } ADMADescr;
579 static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
581 uint32_t adma1 = 0;
582 uint64_t adma2 = 0;
583 hwaddr entry_addr = (hwaddr)s->admasysaddr;
584 switch (SDHC_DMA_TYPE(s->hostctl)) {
585 case SDHC_CTRL_ADMA2_32:
586 dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2,
587 sizeof(adma2));
588 adma2 = le64_to_cpu(adma2);
589 /* The spec does not specify endianness of descriptor table.
590 * We currently assume that it is LE.
592 dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull;
593 dscr->length = (uint16_t)extract64(adma2, 16, 16);
594 dscr->attr = (uint8_t)extract64(adma2, 0, 7);
595 dscr->incr = 8;
596 break;
597 case SDHC_CTRL_ADMA1_32:
598 dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1,
599 sizeof(adma1));
600 adma1 = le32_to_cpu(adma1);
601 dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
602 dscr->attr = (uint8_t)extract32(adma1, 0, 7);
603 dscr->incr = 4;
604 if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) {
605 dscr->length = (uint16_t)extract32(adma1, 12, 16);
606 } else {
607 dscr->length = 4096;
609 break;
610 case SDHC_CTRL_ADMA2_64:
611 dma_memory_read(&address_space_memory, entry_addr,
612 (uint8_t *)(&dscr->attr), 1);
613 dma_memory_read(&address_space_memory, entry_addr + 2,
614 (uint8_t *)(&dscr->length), 2);
615 dscr->length = le16_to_cpu(dscr->length);
616 dma_memory_read(&address_space_memory, entry_addr + 4,
617 (uint8_t *)(&dscr->addr), 8);
618 dscr->attr = le64_to_cpu(dscr->attr);
619 dscr->attr &= 0xfffffff8;
620 dscr->incr = 12;
621 break;
625 /* Advanced DMA data transfer */
627 static void sdhci_do_adma(SDHCIState *s)
629 unsigned int n, begin, length;
630 const uint16_t block_size = s->blksize & 0x0fff;
631 ADMADescr dscr;
632 int i;
634 for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) {
635 s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH;
637 get_adma_description(s, &dscr);
638 DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n",
639 dscr.addr, dscr.length, dscr.attr);
641 if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) {
642 /* Indicate that error occurred in ST_FDS state */
643 s->admaerr &= ~SDHC_ADMAERR_STATE_MASK;
644 s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS;
646 /* Generate ADMA error interrupt */
647 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
648 s->errintsts |= SDHC_EIS_ADMAERR;
649 s->norintsts |= SDHC_NIS_ERR;
652 sdhci_update_irq(s);
653 return;
656 length = dscr.length ? dscr.length : 65536;
658 switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) {
659 case SDHC_ADMA_ATTR_ACT_TRAN: /* data transfer */
661 if (s->trnmod & SDHC_TRNS_READ) {
662 while (length) {
663 if (s->data_count == 0) {
664 for (n = 0; n < block_size; n++) {
665 s->fifo_buffer[n] = sd_read_data(s->card);
668 begin = s->data_count;
669 if ((length + begin) < block_size) {
670 s->data_count = length + begin;
671 length = 0;
672 } else {
673 s->data_count = block_size;
674 length -= block_size - begin;
676 dma_memory_write(&address_space_memory, dscr.addr,
677 &s->fifo_buffer[begin],
678 s->data_count - begin);
679 dscr.addr += s->data_count - begin;
680 if (s->data_count == block_size) {
681 s->data_count = 0;
682 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
683 s->blkcnt--;
684 if (s->blkcnt == 0) {
685 break;
690 } else {
691 while (length) {
692 begin = s->data_count;
693 if ((length + begin) < block_size) {
694 s->data_count = length + begin;
695 length = 0;
696 } else {
697 s->data_count = block_size;
698 length -= block_size - begin;
700 dma_memory_read(&address_space_memory, dscr.addr,
701 &s->fifo_buffer[begin],
702 s->data_count - begin);
703 dscr.addr += s->data_count - begin;
704 if (s->data_count == block_size) {
705 for (n = 0; n < block_size; n++) {
706 sd_write_data(s->card, s->fifo_buffer[n]);
708 s->data_count = 0;
709 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
710 s->blkcnt--;
711 if (s->blkcnt == 0) {
712 break;
718 s->admasysaddr += dscr.incr;
719 break;
720 case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */
721 s->admasysaddr = dscr.addr;
722 DPRINT_L1("ADMA link: admasysaddr=0x%lx\n", s->admasysaddr);
723 break;
724 default:
725 s->admasysaddr += dscr.incr;
726 break;
729 if (dscr.attr & SDHC_ADMA_ATTR_INT) {
730 DPRINT_L1("ADMA interrupt: admasysaddr=0x%lx\n", s->admasysaddr);
731 if (s->norintstsen & SDHC_NISEN_DMA) {
732 s->norintsts |= SDHC_NIS_DMA;
735 sdhci_update_irq(s);
738 /* ADMA transfer terminates if blkcnt == 0 or by END attribute */
739 if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
740 (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) {
741 DPRINT_L2("ADMA transfer completed\n");
742 if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) &&
743 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
744 s->blkcnt != 0)) {
745 ERRPRINT("SD/MMC host ADMA length mismatch\n");
746 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH |
747 SDHC_ADMAERR_STATE_ST_TFR;
748 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
749 ERRPRINT("Set ADMA error flag\n");
750 s->errintsts |= SDHC_EIS_ADMAERR;
751 s->norintsts |= SDHC_NIS_ERR;
754 sdhci_update_irq(s);
756 sdhci_end_transfer(s);
757 return;
762 /* we have unfinished business - reschedule to continue ADMA */
763 timer_mod(s->transfer_timer,
764 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY);
767 /* Perform data transfer according to controller configuration */
769 static void sdhci_data_transfer(void *opaque)
771 SDHCIState *s = (SDHCIState *)opaque;
773 if (s->trnmod & SDHC_TRNS_DMA) {
774 switch (SDHC_DMA_TYPE(s->hostctl)) {
775 case SDHC_CTRL_SDMA:
776 if ((s->trnmod & SDHC_TRNS_MULTI) &&
777 (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || s->blkcnt == 0)) {
778 break;
781 if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
782 sdhci_sdma_transfer_single_block(s);
783 } else {
784 sdhci_sdma_transfer_multi_blocks(s);
787 break;
788 case SDHC_CTRL_ADMA1_32:
789 if (!(s->capareg & SDHC_CAN_DO_ADMA1)) {
790 ERRPRINT("ADMA1 not supported\n");
791 break;
794 sdhci_do_adma(s);
795 break;
796 case SDHC_CTRL_ADMA2_32:
797 if (!(s->capareg & SDHC_CAN_DO_ADMA2)) {
798 ERRPRINT("ADMA2 not supported\n");
799 break;
802 sdhci_do_adma(s);
803 break;
804 case SDHC_CTRL_ADMA2_64:
805 if (!(s->capareg & SDHC_CAN_DO_ADMA2) ||
806 !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) {
807 ERRPRINT("64 bit ADMA not supported\n");
808 break;
811 sdhci_do_adma(s);
812 break;
813 default:
814 ERRPRINT("Unsupported DMA type\n");
815 break;
817 } else {
818 if ((s->trnmod & SDHC_TRNS_READ) && sd_data_ready(s->card)) {
819 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
820 SDHC_DAT_LINE_ACTIVE;
821 sdhci_read_block_from_card(s);
822 } else {
823 s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
824 SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
825 sdhci_write_block_to_card(s);
830 static bool sdhci_can_issue_command(SDHCIState *s)
832 if (!SDHC_CLOCK_IS_ON(s->clkcon) || !(s->pwrcon & SDHC_POWER_ON) ||
833 (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) &&
834 ((s->cmdreg & SDHC_CMD_DATA_PRESENT) ||
835 ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY &&
836 !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) {
837 return false;
840 return true;
843 /* The Buffer Data Port register must be accessed in sequential and
844 * continuous manner */
845 static inline bool
846 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num)
848 if ((s->data_count & 0x3) != byte_num) {
849 ERRPRINT("Non-sequential access to Buffer Data Port register"
850 "is prohibited\n");
851 return false;
853 return true;
856 static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
858 SDHCIState *s = (SDHCIState *)opaque;
859 uint32_t ret = 0;
861 switch (offset & ~0x3) {
862 case SDHC_SYSAD:
863 ret = s->sdmasysad;
864 break;
865 case SDHC_BLKSIZE:
866 ret = s->blksize | (s->blkcnt << 16);
867 break;
868 case SDHC_ARGUMENT:
869 ret = s->argument;
870 break;
871 case SDHC_TRNMOD:
872 ret = s->trnmod | (s->cmdreg << 16);
873 break;
874 case SDHC_RSPREG0 ... SDHC_RSPREG3:
875 ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2];
876 break;
877 case SDHC_BDATA:
878 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
879 ret = sdhci_read_dataport(s, size);
880 DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset,
881 ret, ret);
882 return ret;
884 break;
885 case SDHC_PRNSTS:
886 ret = s->prnsts;
887 break;
888 case SDHC_HOSTCTL:
889 ret = s->hostctl | (s->pwrcon << 8) | (s->blkgap << 16) |
890 (s->wakcon << 24);
891 break;
892 case SDHC_CLKCON:
893 ret = s->clkcon | (s->timeoutcon << 16);
894 break;
895 case SDHC_NORINTSTS:
896 ret = s->norintsts | (s->errintsts << 16);
897 break;
898 case SDHC_NORINTSTSEN:
899 ret = s->norintstsen | (s->errintstsen << 16);
900 break;
901 case SDHC_NORINTSIGEN:
902 ret = s->norintsigen | (s->errintsigen << 16);
903 break;
904 case SDHC_ACMD12ERRSTS:
905 ret = s->acmd12errsts;
906 break;
907 case SDHC_CAPAREG:
908 ret = s->capareg;
909 break;
910 case SDHC_MAXCURR:
911 ret = s->maxcurr;
912 break;
913 case SDHC_ADMAERR:
914 ret = s->admaerr;
915 break;
916 case SDHC_ADMASYSADDR:
917 ret = (uint32_t)s->admasysaddr;
918 break;
919 case SDHC_ADMASYSADDR + 4:
920 ret = (uint32_t)(s->admasysaddr >> 32);
921 break;
922 case SDHC_SLOT_INT_STATUS:
923 ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s);
924 break;
925 default:
926 ERRPRINT("bad %ub read: addr[0x%04x]\n", size, (int)offset);
927 break;
930 ret >>= (offset & 0x3) * 8;
931 ret &= (1ULL << (size * 8)) - 1;
932 DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, ret, ret);
933 return ret;
936 static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value)
938 if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) {
939 return;
941 s->blkgap = value & SDHC_STOP_AT_GAP_REQ;
943 if ((value & SDHC_CONTINUE_REQ) && s->stopped_state &&
944 (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) {
945 if (s->stopped_state == sdhc_gap_read) {
946 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ;
947 sdhci_read_block_from_card(s);
948 } else {
949 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE;
950 sdhci_write_block_to_card(s);
952 s->stopped_state = sdhc_not_stopped;
953 } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) {
954 if (s->prnsts & SDHC_DOING_READ) {
955 s->stopped_state = sdhc_gap_read;
956 } else if (s->prnsts & SDHC_DOING_WRITE) {
957 s->stopped_state = sdhc_gap_write;
962 static inline void sdhci_reset_write(SDHCIState *s, uint8_t value)
964 switch (value) {
965 case SDHC_RESET_ALL:
966 sdhci_reset(s);
967 break;
968 case SDHC_RESET_CMD:
969 s->prnsts &= ~SDHC_CMD_INHIBIT;
970 s->norintsts &= ~SDHC_NIS_CMDCMP;
971 break;
972 case SDHC_RESET_DATA:
973 s->data_count = 0;
974 s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE |
975 SDHC_DOING_READ | SDHC_DOING_WRITE |
976 SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE);
977 s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ);
978 s->stopped_state = sdhc_not_stopped;
979 s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY |
980 SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP);
981 break;
985 static void
986 sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
988 SDHCIState *s = (SDHCIState *)opaque;
989 unsigned shift = 8 * (offset & 0x3);
990 uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift);
991 uint32_t value = val;
992 value <<= shift;
994 switch (offset & ~0x3) {
995 case SDHC_SYSAD:
996 s->sdmasysad = (s->sdmasysad & mask) | value;
997 MASKED_WRITE(s->sdmasysad, mask, value);
998 /* Writing to last byte of sdmasysad might trigger transfer */
999 if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt &&
1000 s->blksize && SDHC_DMA_TYPE(s->hostctl) == SDHC_CTRL_SDMA) {
1001 sdhci_sdma_transfer_multi_blocks(s);
1003 break;
1004 case SDHC_BLKSIZE:
1005 if (!TRANSFERRING_DATA(s->prnsts)) {
1006 MASKED_WRITE(s->blksize, mask, value);
1007 MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16);
1009 break;
1010 case SDHC_ARGUMENT:
1011 MASKED_WRITE(s->argument, mask, value);
1012 break;
1013 case SDHC_TRNMOD:
1014 /* DMA can be enabled only if it is supported as indicated by
1015 * capabilities register */
1016 if (!(s->capareg & SDHC_CAN_DO_DMA)) {
1017 value &= ~SDHC_TRNS_DMA;
1019 MASKED_WRITE(s->trnmod, mask, value);
1020 MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16);
1022 /* Writing to the upper byte of CMDREG triggers SD command generation */
1023 if ((mask & 0xFF000000) || !sdhci_can_issue_command(s)) {
1024 break;
1027 sdhci_send_command(s);
1028 break;
1029 case SDHC_BDATA:
1030 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
1031 sdhci_write_dataport(s, value >> shift, size);
1033 break;
1034 case SDHC_HOSTCTL:
1035 if (!(mask & 0xFF0000)) {
1036 sdhci_blkgap_write(s, value >> 16);
1038 MASKED_WRITE(s->hostctl, mask, value);
1039 MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8);
1040 MASKED_WRITE(s->wakcon, mask >> 24, value >> 24);
1041 if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 ||
1042 !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) {
1043 s->pwrcon &= ~SDHC_POWER_ON;
1045 break;
1046 case SDHC_CLKCON:
1047 if (!(mask & 0xFF000000)) {
1048 sdhci_reset_write(s, value >> 24);
1050 MASKED_WRITE(s->clkcon, mask, value);
1051 MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16);
1052 if (s->clkcon & SDHC_CLOCK_INT_EN) {
1053 s->clkcon |= SDHC_CLOCK_INT_STABLE;
1054 } else {
1055 s->clkcon &= ~SDHC_CLOCK_INT_STABLE;
1057 break;
1058 case SDHC_NORINTSTS:
1059 if (s->norintstsen & SDHC_NISEN_CARDINT) {
1060 value &= ~SDHC_NIS_CARDINT;
1062 s->norintsts &= mask | ~value;
1063 s->errintsts &= (mask >> 16) | ~(value >> 16);
1064 if (s->errintsts) {
1065 s->norintsts |= SDHC_NIS_ERR;
1066 } else {
1067 s->norintsts &= ~SDHC_NIS_ERR;
1069 sdhci_update_irq(s);
1070 break;
1071 case SDHC_NORINTSTSEN:
1072 MASKED_WRITE(s->norintstsen, mask, value);
1073 MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16);
1074 s->norintsts &= s->norintstsen;
1075 s->errintsts &= s->errintstsen;
1076 if (s->errintsts) {
1077 s->norintsts |= SDHC_NIS_ERR;
1078 } else {
1079 s->norintsts &= ~SDHC_NIS_ERR;
1081 sdhci_update_irq(s);
1082 break;
1083 case SDHC_NORINTSIGEN:
1084 MASKED_WRITE(s->norintsigen, mask, value);
1085 MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16);
1086 sdhci_update_irq(s);
1087 break;
1088 case SDHC_ADMAERR:
1089 MASKED_WRITE(s->admaerr, mask, value);
1090 break;
1091 case SDHC_ADMASYSADDR:
1092 s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL |
1093 (uint64_t)mask)) | (uint64_t)value;
1094 break;
1095 case SDHC_ADMASYSADDR + 4:
1096 s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL |
1097 ((uint64_t)mask << 32))) | ((uint64_t)value << 32);
1098 break;
1099 case SDHC_FEAER:
1100 s->acmd12errsts |= value;
1101 s->errintsts |= (value >> 16) & s->errintstsen;
1102 if (s->acmd12errsts) {
1103 s->errintsts |= SDHC_EIS_CMD12ERR;
1105 if (s->errintsts) {
1106 s->norintsts |= SDHC_NIS_ERR;
1108 sdhci_update_irq(s);
1109 break;
1110 default:
1111 ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n",
1112 size, (int)offset, value >> shift, value >> shift);
1113 break;
1115 DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n",
1116 size, (int)offset, value >> shift, value >> shift);
1119 static const MemoryRegionOps sdhci_mmio_ops = {
1120 .read = sdhci_read,
1121 .write = sdhci_write,
1122 .valid = {
1123 .min_access_size = 1,
1124 .max_access_size = 4,
1125 .unaligned = false
1127 .endianness = DEVICE_LITTLE_ENDIAN,
1130 static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
1132 switch (SDHC_CAPAB_BLOCKSIZE(s->capareg)) {
1133 case 0:
1134 return 512;
1135 case 1:
1136 return 1024;
1137 case 2:
1138 return 2048;
1139 default:
1140 hw_error("SDHC: unsupported value for maximum block size\n");
1141 return 0;
1145 static void sdhci_initfn(SDHCIState *s)
1147 DriveInfo *di;
1149 di = drive_get_next(IF_SD);
1150 s->card = sd_init(di ? blk_by_legacy_dinfo(di) : NULL, false);
1151 if (s->card == NULL) {
1152 exit(1);
1154 s->eject_cb = qemu_allocate_irq(sdhci_insert_eject_cb, s, 0);
1155 s->ro_cb = qemu_allocate_irq(sdhci_card_readonly_cb, s, 0);
1156 sd_set_cb(s->card, s->ro_cb, s->eject_cb);
1158 s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s);
1159 s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s);
1162 static void sdhci_uninitfn(SDHCIState *s)
1164 timer_del(s->insert_timer);
1165 timer_free(s->insert_timer);
1166 timer_del(s->transfer_timer);
1167 timer_free(s->transfer_timer);
1168 qemu_free_irq(s->eject_cb);
1169 qemu_free_irq(s->ro_cb);
1171 if (s->fifo_buffer) {
1172 g_free(s->fifo_buffer);
1173 s->fifo_buffer = NULL;
1177 const VMStateDescription sdhci_vmstate = {
1178 .name = "sdhci",
1179 .version_id = 1,
1180 .minimum_version_id = 1,
1181 .fields = (VMStateField[]) {
1182 VMSTATE_UINT32(sdmasysad, SDHCIState),
1183 VMSTATE_UINT16(blksize, SDHCIState),
1184 VMSTATE_UINT16(blkcnt, SDHCIState),
1185 VMSTATE_UINT32(argument, SDHCIState),
1186 VMSTATE_UINT16(trnmod, SDHCIState),
1187 VMSTATE_UINT16(cmdreg, SDHCIState),
1188 VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4),
1189 VMSTATE_UINT32(prnsts, SDHCIState),
1190 VMSTATE_UINT8(hostctl, SDHCIState),
1191 VMSTATE_UINT8(pwrcon, SDHCIState),
1192 VMSTATE_UINT8(blkgap, SDHCIState),
1193 VMSTATE_UINT8(wakcon, SDHCIState),
1194 VMSTATE_UINT16(clkcon, SDHCIState),
1195 VMSTATE_UINT8(timeoutcon, SDHCIState),
1196 VMSTATE_UINT8(admaerr, SDHCIState),
1197 VMSTATE_UINT16(norintsts, SDHCIState),
1198 VMSTATE_UINT16(errintsts, SDHCIState),
1199 VMSTATE_UINT16(norintstsen, SDHCIState),
1200 VMSTATE_UINT16(errintstsen, SDHCIState),
1201 VMSTATE_UINT16(norintsigen, SDHCIState),
1202 VMSTATE_UINT16(errintsigen, SDHCIState),
1203 VMSTATE_UINT16(acmd12errsts, SDHCIState),
1204 VMSTATE_UINT16(data_count, SDHCIState),
1205 VMSTATE_UINT64(admasysaddr, SDHCIState),
1206 VMSTATE_UINT8(stopped_state, SDHCIState),
1207 VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, 0, buf_maxsz),
1208 VMSTATE_TIMER_PTR(insert_timer, SDHCIState),
1209 VMSTATE_TIMER_PTR(transfer_timer, SDHCIState),
1210 VMSTATE_END_OF_LIST()
1214 /* Capabilities registers provide information on supported features of this
1215 * specific host controller implementation */
1216 static Property sdhci_properties[] = {
1217 DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
1218 SDHC_CAPAB_REG_DEFAULT),
1219 DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
1220 DEFINE_PROP_END_OF_LIST(),
1223 static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
1225 SDHCIState *s = PCI_SDHCI(dev);
1226 dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
1227 dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
1228 sdhci_initfn(s);
1229 s->buf_maxsz = sdhci_get_fifolen(s);
1230 s->fifo_buffer = g_malloc0(s->buf_maxsz);
1231 s->irq = pci_allocate_irq(dev);
1232 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
1233 SDHC_REGISTERS_MAP_SIZE);
1234 pci_register_bar(dev, 0, 0, &s->iomem);
1237 static void sdhci_pci_exit(PCIDevice *dev)
1239 SDHCIState *s = PCI_SDHCI(dev);
1240 sdhci_uninitfn(s);
1243 static void sdhci_pci_class_init(ObjectClass *klass, void *data)
1245 DeviceClass *dc = DEVICE_CLASS(klass);
1246 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1248 k->realize = sdhci_pci_realize;
1249 k->exit = sdhci_pci_exit;
1250 k->vendor_id = PCI_VENDOR_ID_REDHAT;
1251 k->device_id = PCI_DEVICE_ID_REDHAT_SDHCI;
1252 k->class_id = PCI_CLASS_SYSTEM_SDHCI;
1253 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
1254 dc->vmsd = &sdhci_vmstate;
1255 dc->props = sdhci_properties;
1258 static const TypeInfo sdhci_pci_info = {
1259 .name = TYPE_PCI_SDHCI,
1260 .parent = TYPE_PCI_DEVICE,
1261 .instance_size = sizeof(SDHCIState),
1262 .class_init = sdhci_pci_class_init,
1265 static void sdhci_sysbus_init(Object *obj)
1267 SDHCIState *s = SYSBUS_SDHCI(obj);
1268 sdhci_initfn(s);
1271 static void sdhci_sysbus_finalize(Object *obj)
1273 SDHCIState *s = SYSBUS_SDHCI(obj);
1274 sdhci_uninitfn(s);
1277 static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
1279 SDHCIState *s = SYSBUS_SDHCI(dev);
1280 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1282 s->buf_maxsz = sdhci_get_fifolen(s);
1283 s->fifo_buffer = g_malloc0(s->buf_maxsz);
1284 sysbus_init_irq(sbd, &s->irq);
1285 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
1286 SDHC_REGISTERS_MAP_SIZE);
1287 sysbus_init_mmio(sbd, &s->iomem);
1290 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
1292 DeviceClass *dc = DEVICE_CLASS(klass);
1294 dc->vmsd = &sdhci_vmstate;
1295 dc->props = sdhci_properties;
1296 dc->realize = sdhci_sysbus_realize;
1299 static const TypeInfo sdhci_sysbus_info = {
1300 .name = TYPE_SYSBUS_SDHCI,
1301 .parent = TYPE_SYS_BUS_DEVICE,
1302 .instance_size = sizeof(SDHCIState),
1303 .instance_init = sdhci_sysbus_init,
1304 .instance_finalize = sdhci_sysbus_finalize,
1305 .class_init = sdhci_sysbus_class_init,
1308 static void sdhci_register_types(void)
1310 type_register_static(&sdhci_pci_info);
1311 type_register_static(&sdhci_sysbus_info);
1314 type_init(sdhci_register_types)