cirrus: Fix host CPU blits
[qemu/cris-port.git] / block.c
blob8800a6b5b37215f8c264676dce5857e2d206a8b4
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 bdrv_get_aio_context(bs),
183 QEMU_CLOCK_VIRTUAL,
184 bdrv_throttle_read_timer_cb,
185 bdrv_throttle_write_timer_cb,
186 bs);
187 bs->io_limits_enabled = true;
190 /* This function makes an IO wait if needed
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196 unsigned int bytes,
197 bool is_write)
199 /* does this io must wait */
200 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
202 /* if must wait or any request of this type throttled queue the IO */
203 if (must_wait ||
204 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs->throttle_state, is_write, bytes);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214 return;
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
223 if (!bs || !bs->drv) {
224 /* 4k should be on the safe side */
225 return 4096;
228 return bs->bl.opt_mem_alignment;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
234 const char *p;
236 #ifdef _WIN32
237 if (is_windows_drive(path) ||
238 is_windows_drive_prefix(path)) {
239 return 0;
241 p = path + strcspn(path, ":/\\");
242 #else
243 p = path + strcspn(path, ":/");
244 #endif
246 return *p == ':';
249 int path_is_absolute(const char *path)
251 #ifdef _WIN32
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254 return 1;
256 return (*path == '/' || *path == '\\');
257 #else
258 return (*path == '/');
259 #endif
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
264 supported. */
265 void path_combine(char *dest, int dest_size,
266 const char *base_path,
267 const char *filename)
269 const char *p, *p1;
270 int len;
272 if (dest_size <= 0)
273 return;
274 if (path_is_absolute(filename)) {
275 pstrcpy(dest, dest_size, filename);
276 } else {
277 p = strchr(base_path, ':');
278 if (p)
279 p++;
280 else
281 p = base_path;
282 p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
285 const char *p2;
286 p2 = strrchr(base_path, '\\');
287 if (!p1 || p2 > p1)
288 p1 = p2;
290 #endif
291 if (p1)
292 p1++;
293 else
294 p1 = base_path;
295 if (p1 > p)
296 p = p1;
297 len = p - base_path;
298 if (len > dest_size - 1)
299 len = dest_size - 1;
300 memcpy(dest, base_path, len);
301 dest[len] = '\0';
302 pstrcat(dest, dest_size, filename);
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309 pstrcpy(dest, sz, bs->backing_file);
310 } else {
311 path_combine(dest, sz, bs->filename, bs->backing_file);
315 void bdrv_register(BlockDriver *bdrv)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv->bdrv_co_readv) {
319 bdrv->bdrv_co_readv = bdrv_co_readv_em;
320 bdrv->bdrv_co_writev = bdrv_co_writev_em;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv->bdrv_aio_readv) {
326 /* add AIO emulation layer */
327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
338 BlockDriverState *bs;
339 int i;
341 if (bdrv_find(device_name)) {
342 error_setg(errp, "Device with id '%s' already exists",
343 device_name);
344 return NULL;
346 if (bdrv_find_node(device_name)) {
347 error_setg(errp, "Device with node-name '%s' already exists",
348 device_name);
349 return NULL;
352 bs = g_malloc0(sizeof(BlockDriverState));
353 QLIST_INIT(&bs->dirty_bitmaps);
354 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355 if (device_name[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
358 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359 QLIST_INIT(&bs->op_blockers[i]);
361 bdrv_iostatus_disable(bs);
362 notifier_list_init(&bs->close_notifiers);
363 notifier_with_return_list_init(&bs->before_write_notifiers);
364 qemu_co_queue_init(&bs->throttled_reqs[0]);
365 qemu_co_queue_init(&bs->throttled_reqs[1]);
366 bs->refcnt = 1;
367 bs->aio_context = qemu_get_aio_context();
369 return bs;
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
374 notifier_list_add(&bs->close_notifiers, notify);
377 BlockDriver *bdrv_find_format(const char *format_name)
379 BlockDriver *drv1;
380 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381 if (!strcmp(drv1->format_name, format_name)) {
382 return drv1;
385 return NULL;
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
390 static const char *whitelist_rw[] = {
391 CONFIG_BDRV_RW_WHITELIST
393 static const char *whitelist_ro[] = {
394 CONFIG_BDRV_RO_WHITELIST
396 const char **p;
398 if (!whitelist_rw[0] && !whitelist_ro[0]) {
399 return 1; /* no whitelist, anything goes */
402 for (p = whitelist_rw; *p; p++) {
403 if (!strcmp(drv->format_name, *p)) {
404 return 1;
407 if (read_only) {
408 for (p = whitelist_ro; *p; p++) {
409 if (!strcmp(drv->format_name, *p)) {
410 return 1;
414 return 0;
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418 bool read_only)
420 BlockDriver *drv = bdrv_find_format(format_name);
421 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
424 typedef struct CreateCo {
425 BlockDriver *drv;
426 char *filename;
427 QemuOpts *opts;
428 int ret;
429 Error *err;
430 } CreateCo;
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
434 Error *local_err = NULL;
435 int ret;
437 CreateCo *cco = opaque;
438 assert(cco->drv);
440 ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441 if (local_err) {
442 error_propagate(&cco->err, local_err);
444 cco->ret = ret;
447 int bdrv_create(BlockDriver *drv, const char* filename,
448 QemuOpts *opts, Error **errp)
450 int ret;
452 Coroutine *co;
453 CreateCo cco = {
454 .drv = drv,
455 .filename = g_strdup(filename),
456 .opts = opts,
457 .ret = NOT_DONE,
458 .err = NULL,
461 if (!drv->bdrv_create) {
462 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463 ret = -ENOTSUP;
464 goto out;
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco);
470 } else {
471 co = qemu_coroutine_create(bdrv_create_co_entry);
472 qemu_coroutine_enter(co, &cco);
473 while (cco.ret == NOT_DONE) {
474 qemu_aio_wait();
478 ret = cco.ret;
479 if (ret < 0) {
480 if (cco.err) {
481 error_propagate(errp, cco.err);
482 } else {
483 error_setg_errno(errp, -ret, "Could not create image");
487 out:
488 g_free(cco.filename);
489 return ret;
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
494 BlockDriver *drv;
495 Error *local_err = NULL;
496 int ret;
498 drv = bdrv_find_protocol(filename, true);
499 if (drv == NULL) {
500 error_setg(errp, "Could not find protocol for file '%s'", filename);
501 return -ENOENT;
504 ret = bdrv_create(drv, filename, opts, &local_err);
505 if (local_err) {
506 error_propagate(errp, local_err);
508 return ret;
511 int bdrv_refresh_limits(BlockDriverState *bs)
513 BlockDriver *drv = bs->drv;
515 memset(&bs->bl, 0, sizeof(bs->bl));
517 if (!drv) {
518 return 0;
521 /* Take some limits from the children as a default */
522 if (bs->file) {
523 bdrv_refresh_limits(bs->file);
524 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
525 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
526 } else {
527 bs->bl.opt_mem_alignment = 512;
530 if (bs->backing_hd) {
531 bdrv_refresh_limits(bs->backing_hd);
532 bs->bl.opt_transfer_length =
533 MAX(bs->bl.opt_transfer_length,
534 bs->backing_hd->bl.opt_transfer_length);
535 bs->bl.opt_mem_alignment =
536 MAX(bs->bl.opt_mem_alignment,
537 bs->backing_hd->bl.opt_mem_alignment);
540 /* Then let the driver override it */
541 if (drv->bdrv_refresh_limits) {
542 return drv->bdrv_refresh_limits(bs);
545 return 0;
549 * Create a uniquely-named empty temporary file.
550 * Return 0 upon success, otherwise a negative errno value.
552 int get_tmp_filename(char *filename, int size)
554 #ifdef _WIN32
555 char temp_dir[MAX_PATH];
556 /* GetTempFileName requires that its output buffer (4th param)
557 have length MAX_PATH or greater. */
558 assert(size >= MAX_PATH);
559 return (GetTempPath(MAX_PATH, temp_dir)
560 && GetTempFileName(temp_dir, "qem", 0, filename)
561 ? 0 : -GetLastError());
562 #else
563 int fd;
564 const char *tmpdir;
565 tmpdir = getenv("TMPDIR");
566 if (!tmpdir) {
567 tmpdir = "/var/tmp";
569 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
570 return -EOVERFLOW;
572 fd = mkstemp(filename);
573 if (fd < 0) {
574 return -errno;
576 if (close(fd) != 0) {
577 unlink(filename);
578 return -errno;
580 return 0;
581 #endif
585 * Detect host devices. By convention, /dev/cdrom[N] is always
586 * recognized as a host CDROM.
588 static BlockDriver *find_hdev_driver(const char *filename)
590 int score_max = 0, score;
591 BlockDriver *drv = NULL, *d;
593 QLIST_FOREACH(d, &bdrv_drivers, list) {
594 if (d->bdrv_probe_device) {
595 score = d->bdrv_probe_device(filename);
596 if (score > score_max) {
597 score_max = score;
598 drv = d;
603 return drv;
606 BlockDriver *bdrv_find_protocol(const char *filename,
607 bool allow_protocol_prefix)
609 BlockDriver *drv1;
610 char protocol[128];
611 int len;
612 const char *p;
614 /* TODO Drivers without bdrv_file_open must be specified explicitly */
617 * XXX(hch): we really should not let host device detection
618 * override an explicit protocol specification, but moving this
619 * later breaks access to device names with colons in them.
620 * Thanks to the brain-dead persistent naming schemes on udev-
621 * based Linux systems those actually are quite common.
623 drv1 = find_hdev_driver(filename);
624 if (drv1) {
625 return drv1;
628 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
629 return bdrv_find_format("file");
632 p = strchr(filename, ':');
633 assert(p != NULL);
634 len = p - filename;
635 if (len > sizeof(protocol) - 1)
636 len = sizeof(protocol) - 1;
637 memcpy(protocol, filename, len);
638 protocol[len] = '\0';
639 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
640 if (drv1->protocol_name &&
641 !strcmp(drv1->protocol_name, protocol)) {
642 return drv1;
645 return NULL;
648 static int find_image_format(BlockDriverState *bs, const char *filename,
649 BlockDriver **pdrv, Error **errp)
651 int score, score_max;
652 BlockDriver *drv1, *drv;
653 uint8_t buf[2048];
654 int ret = 0;
656 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
658 drv = bdrv_find_format("raw");
659 if (!drv) {
660 error_setg(errp, "Could not find raw image format");
661 ret = -ENOENT;
663 *pdrv = drv;
664 return ret;
667 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
668 if (ret < 0) {
669 error_setg_errno(errp, -ret, "Could not read image for determining its "
670 "format");
671 *pdrv = NULL;
672 return ret;
675 score_max = 0;
676 drv = NULL;
677 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
678 if (drv1->bdrv_probe) {
679 score = drv1->bdrv_probe(buf, ret, filename);
680 if (score > score_max) {
681 score_max = score;
682 drv = drv1;
686 if (!drv) {
687 error_setg(errp, "Could not determine image format: No compatible "
688 "driver found");
689 ret = -ENOENT;
691 *pdrv = drv;
692 return ret;
696 * Set the current 'total_sectors' value
698 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
700 BlockDriver *drv = bs->drv;
702 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
703 if (bs->sg)
704 return 0;
706 /* query actual device if possible, otherwise just trust the hint */
707 if (drv->bdrv_getlength) {
708 int64_t length = drv->bdrv_getlength(bs);
709 if (length < 0) {
710 return length;
712 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
715 bs->total_sectors = hint;
716 return 0;
720 * Set open flags for a given discard mode
722 * Return 0 on success, -1 if the discard mode was invalid.
724 int bdrv_parse_discard_flags(const char *mode, int *flags)
726 *flags &= ~BDRV_O_UNMAP;
728 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
729 /* do nothing */
730 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
731 *flags |= BDRV_O_UNMAP;
732 } else {
733 return -1;
736 return 0;
740 * Set open flags for a given cache mode
742 * Return 0 on success, -1 if the cache mode was invalid.
744 int bdrv_parse_cache_flags(const char *mode, int *flags)
746 *flags &= ~BDRV_O_CACHE_MASK;
748 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
749 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
750 } else if (!strcmp(mode, "directsync")) {
751 *flags |= BDRV_O_NOCACHE;
752 } else if (!strcmp(mode, "writeback")) {
753 *flags |= BDRV_O_CACHE_WB;
754 } else if (!strcmp(mode, "unsafe")) {
755 *flags |= BDRV_O_CACHE_WB;
756 *flags |= BDRV_O_NO_FLUSH;
757 } else if (!strcmp(mode, "writethrough")) {
758 /* this is the default */
759 } else {
760 return -1;
763 return 0;
767 * The copy-on-read flag is actually a reference count so multiple users may
768 * use the feature without worrying about clobbering its previous state.
769 * Copy-on-read stays enabled until all users have called to disable it.
771 void bdrv_enable_copy_on_read(BlockDriverState *bs)
773 bs->copy_on_read++;
776 void bdrv_disable_copy_on_read(BlockDriverState *bs)
778 assert(bs->copy_on_read > 0);
779 bs->copy_on_read--;
783 * Returns the flags that a temporary snapshot should get, based on the
784 * originally requested flags (the originally requested image will have flags
785 * like a backing file)
787 static int bdrv_temp_snapshot_flags(int flags)
789 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
793 * Returns the flags that bs->file should get, based on the given flags for
794 * the parent BDS
796 static int bdrv_inherited_flags(int flags)
798 /* Enable protocol handling, disable format probing for bs->file */
799 flags |= BDRV_O_PROTOCOL;
801 /* Our block drivers take care to send flushes and respect unmap policy,
802 * so we can enable both unconditionally on lower layers. */
803 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
805 /* Clear flags that only apply to the top layer */
806 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
808 return flags;
812 * Returns the flags that bs->backing_hd should get, based on the given flags
813 * for the parent BDS
815 static int bdrv_backing_flags(int flags)
817 /* backing files always opened read-only */
818 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
820 /* snapshot=on is handled on the top layer */
821 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
823 return flags;
826 static int bdrv_open_flags(BlockDriverState *bs, int flags)
828 int open_flags = flags | BDRV_O_CACHE_WB;
831 * Clear flags that are internal to the block layer before opening the
832 * image.
834 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
837 * Snapshots should be writable.
839 if (flags & BDRV_O_TEMPORARY) {
840 open_flags |= BDRV_O_RDWR;
843 return open_flags;
846 static void bdrv_assign_node_name(BlockDriverState *bs,
847 const char *node_name,
848 Error **errp)
850 if (!node_name) {
851 return;
854 /* empty string node name is invalid */
855 if (node_name[0] == '\0') {
856 error_setg(errp, "Empty node name");
857 return;
860 /* takes care of avoiding namespaces collisions */
861 if (bdrv_find(node_name)) {
862 error_setg(errp, "node-name=%s is conflicting with a device id",
863 node_name);
864 return;
867 /* takes care of avoiding duplicates node names */
868 if (bdrv_find_node(node_name)) {
869 error_setg(errp, "Duplicate node name");
870 return;
873 /* copy node name into the bs and insert it into the graph list */
874 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
875 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
879 * Common part for opening disk images and files
881 * Removes all processed options from *options.
883 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
884 QDict *options, int flags, BlockDriver *drv, Error **errp)
886 int ret, open_flags;
887 const char *filename;
888 const char *node_name = NULL;
889 Error *local_err = NULL;
891 assert(drv != NULL);
892 assert(bs->file == NULL);
893 assert(options != NULL && bs->options != options);
895 if (file != NULL) {
896 filename = file->filename;
897 } else {
898 filename = qdict_get_try_str(options, "filename");
901 if (drv->bdrv_needs_filename && !filename) {
902 error_setg(errp, "The '%s' block driver requires a file name",
903 drv->format_name);
904 return -EINVAL;
907 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
909 node_name = qdict_get_try_str(options, "node-name");
910 bdrv_assign_node_name(bs, node_name, &local_err);
911 if (local_err) {
912 error_propagate(errp, local_err);
913 return -EINVAL;
915 qdict_del(options, "node-name");
917 /* bdrv_open() with directly using a protocol as drv. This layer is already
918 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919 * and return immediately. */
920 if (file != NULL && drv->bdrv_file_open) {
921 bdrv_swap(file, bs);
922 return 0;
925 bs->open_flags = flags;
926 bs->guest_block_size = 512;
927 bs->request_alignment = 512;
928 bs->zero_beyond_eof = true;
929 open_flags = bdrv_open_flags(bs, flags);
930 bs->read_only = !(open_flags & BDRV_O_RDWR);
931 bs->growable = !!(flags & BDRV_O_PROTOCOL);
933 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
934 error_setg(errp,
935 !bs->read_only && bdrv_is_whitelisted(drv, true)
936 ? "Driver '%s' can only be used for read-only devices"
937 : "Driver '%s' is not whitelisted",
938 drv->format_name);
939 return -ENOTSUP;
942 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
943 if (flags & BDRV_O_COPY_ON_READ) {
944 if (!bs->read_only) {
945 bdrv_enable_copy_on_read(bs);
946 } else {
947 error_setg(errp, "Can't use copy-on-read on read-only device");
948 return -EINVAL;
952 if (filename != NULL) {
953 pstrcpy(bs->filename, sizeof(bs->filename), filename);
954 } else {
955 bs->filename[0] = '\0';
958 bs->drv = drv;
959 bs->opaque = g_malloc0(drv->instance_size);
961 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
963 /* Open the image, either directly or using a protocol */
964 if (drv->bdrv_file_open) {
965 assert(file == NULL);
966 assert(!drv->bdrv_needs_filename || filename != NULL);
967 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
968 } else {
969 if (file == NULL) {
970 error_setg(errp, "Can't use '%s' as a block driver for the "
971 "protocol level", drv->format_name);
972 ret = -EINVAL;
973 goto free_and_fail;
975 bs->file = file;
976 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
979 if (ret < 0) {
980 if (local_err) {
981 error_propagate(errp, local_err);
982 } else if (bs->filename[0]) {
983 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
984 } else {
985 error_setg_errno(errp, -ret, "Could not open image");
987 goto free_and_fail;
990 ret = refresh_total_sectors(bs, bs->total_sectors);
991 if (ret < 0) {
992 error_setg_errno(errp, -ret, "Could not refresh total sector count");
993 goto free_and_fail;
996 bdrv_refresh_limits(bs);
997 assert(bdrv_opt_mem_align(bs) != 0);
998 assert((bs->request_alignment != 0) || bs->sg);
999 return 0;
1001 free_and_fail:
1002 bs->file = NULL;
1003 g_free(bs->opaque);
1004 bs->opaque = NULL;
1005 bs->drv = NULL;
1006 return ret;
1009 static QDict *parse_json_filename(const char *filename, Error **errp)
1011 QObject *options_obj;
1012 QDict *options;
1013 int ret;
1015 ret = strstart(filename, "json:", &filename);
1016 assert(ret);
1018 options_obj = qobject_from_json(filename);
1019 if (!options_obj) {
1020 error_setg(errp, "Could not parse the JSON options");
1021 return NULL;
1024 if (qobject_type(options_obj) != QTYPE_QDICT) {
1025 qobject_decref(options_obj);
1026 error_setg(errp, "Invalid JSON object given");
1027 return NULL;
1030 options = qobject_to_qdict(options_obj);
1031 qdict_flatten(options);
1033 return options;
1037 * Fills in default options for opening images and converts the legacy
1038 * filename/flags pair to option QDict entries.
1040 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1041 BlockDriver *drv, Error **errp)
1043 const char *filename = *pfilename;
1044 const char *drvname;
1045 bool protocol = flags & BDRV_O_PROTOCOL;
1046 bool parse_filename = false;
1047 Error *local_err = NULL;
1049 /* Parse json: pseudo-protocol */
1050 if (filename && g_str_has_prefix(filename, "json:")) {
1051 QDict *json_options = parse_json_filename(filename, &local_err);
1052 if (local_err) {
1053 error_propagate(errp, local_err);
1054 return -EINVAL;
1057 /* Options given in the filename have lower priority than options
1058 * specified directly */
1059 qdict_join(*options, json_options, false);
1060 QDECREF(json_options);
1061 *pfilename = filename = NULL;
1064 /* Fetch the file name from the options QDict if necessary */
1065 if (protocol && filename) {
1066 if (!qdict_haskey(*options, "filename")) {
1067 qdict_put(*options, "filename", qstring_from_str(filename));
1068 parse_filename = true;
1069 } else {
1070 error_setg(errp, "Can't specify 'file' and 'filename' options at "
1071 "the same time");
1072 return -EINVAL;
1076 /* Find the right block driver */
1077 filename = qdict_get_try_str(*options, "filename");
1078 drvname = qdict_get_try_str(*options, "driver");
1080 if (drv) {
1081 if (drvname) {
1082 error_setg(errp, "Driver specified twice");
1083 return -EINVAL;
1085 drvname = drv->format_name;
1086 qdict_put(*options, "driver", qstring_from_str(drvname));
1087 } else {
1088 if (!drvname && protocol) {
1089 if (filename) {
1090 drv = bdrv_find_protocol(filename, parse_filename);
1091 if (!drv) {
1092 error_setg(errp, "Unknown protocol");
1093 return -EINVAL;
1096 drvname = drv->format_name;
1097 qdict_put(*options, "driver", qstring_from_str(drvname));
1098 } else {
1099 error_setg(errp, "Must specify either driver or file");
1100 return -EINVAL;
1102 } else if (drvname) {
1103 drv = bdrv_find_format(drvname);
1104 if (!drv) {
1105 error_setg(errp, "Unknown driver '%s'", drvname);
1106 return -ENOENT;
1111 assert(drv || !protocol);
1113 /* Driver-specific filename parsing */
1114 if (drv && drv->bdrv_parse_filename && parse_filename) {
1115 drv->bdrv_parse_filename(filename, *options, &local_err);
1116 if (local_err) {
1117 error_propagate(errp, local_err);
1118 return -EINVAL;
1121 if (!drv->bdrv_needs_filename) {
1122 qdict_del(*options, "filename");
1126 return 0;
1129 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1132 if (bs->backing_hd) {
1133 assert(bs->backing_blocker);
1134 bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1135 } else if (backing_hd) {
1136 error_setg(&bs->backing_blocker,
1137 "device is used as backing hd of '%s'",
1138 bs->device_name);
1141 bs->backing_hd = backing_hd;
1142 if (!backing_hd) {
1143 error_free(bs->backing_blocker);
1144 bs->backing_blocker = NULL;
1145 goto out;
1147 bs->open_flags &= ~BDRV_O_NO_BACKING;
1148 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1149 pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1150 backing_hd->drv ? backing_hd->drv->format_name : "");
1152 bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1153 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1154 bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1155 bs->backing_blocker);
1156 out:
1157 bdrv_refresh_limits(bs);
1161 * Opens the backing file for a BlockDriverState if not yet open
1163 * options is a QDict of options to pass to the block drivers, or NULL for an
1164 * empty set of options. The reference to the QDict is transferred to this
1165 * function (even on failure), so if the caller intends to reuse the dictionary,
1166 * it needs to use QINCREF() before calling bdrv_file_open.
1168 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1170 char *backing_filename = g_malloc0(PATH_MAX);
1171 int ret = 0;
1172 BlockDriver *back_drv = NULL;
1173 BlockDriverState *backing_hd;
1174 Error *local_err = NULL;
1176 if (bs->backing_hd != NULL) {
1177 QDECREF(options);
1178 goto free_exit;
1181 /* NULL means an empty set of options */
1182 if (options == NULL) {
1183 options = qdict_new();
1186 bs->open_flags &= ~BDRV_O_NO_BACKING;
1187 if (qdict_haskey(options, "file.filename")) {
1188 backing_filename[0] = '\0';
1189 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1190 QDECREF(options);
1191 goto free_exit;
1192 } else {
1193 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1196 if (!bs->drv || !bs->drv->supports_backing) {
1197 ret = -EINVAL;
1198 error_setg(errp, "Driver doesn't support backing files");
1199 QDECREF(options);
1200 goto free_exit;
1203 backing_hd = bdrv_new("", errp);
1205 if (bs->backing_format[0] != '\0') {
1206 back_drv = bdrv_find_format(bs->backing_format);
1209 assert(bs->backing_hd == NULL);
1210 ret = bdrv_open(&backing_hd,
1211 *backing_filename ? backing_filename : NULL, NULL, options,
1212 bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1213 if (ret < 0) {
1214 bdrv_unref(backing_hd);
1215 backing_hd = NULL;
1216 bs->open_flags |= BDRV_O_NO_BACKING;
1217 error_setg(errp, "Could not open backing file: %s",
1218 error_get_pretty(local_err));
1219 error_free(local_err);
1220 goto free_exit;
1222 bdrv_set_backing_hd(bs, backing_hd);
1224 free_exit:
1225 g_free(backing_filename);
1226 return ret;
1230 * Opens a disk image whose options are given as BlockdevRef in another block
1231 * device's options.
1233 * If allow_none is true, no image will be opened if filename is false and no
1234 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1236 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1237 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1238 * itself, all options starting with "${bdref_key}." are considered part of the
1239 * BlockdevRef.
1241 * The BlockdevRef will be removed from the options QDict.
1243 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1245 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1246 QDict *options, const char *bdref_key, int flags,
1247 bool allow_none, Error **errp)
1249 QDict *image_options;
1250 int ret;
1251 char *bdref_key_dot;
1252 const char *reference;
1254 assert(pbs);
1255 assert(*pbs == NULL);
1257 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1258 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1259 g_free(bdref_key_dot);
1261 reference = qdict_get_try_str(options, bdref_key);
1262 if (!filename && !reference && !qdict_size(image_options)) {
1263 if (allow_none) {
1264 ret = 0;
1265 } else {
1266 error_setg(errp, "A block device must be specified for \"%s\"",
1267 bdref_key);
1268 ret = -EINVAL;
1270 QDECREF(image_options);
1271 goto done;
1274 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1276 done:
1277 qdict_del(options, bdref_key);
1278 return ret;
1281 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1283 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1284 char *tmp_filename = g_malloc0(PATH_MAX + 1);
1285 int64_t total_size;
1286 BlockDriver *bdrv_qcow2;
1287 QemuOpts *opts = NULL;
1288 QDict *snapshot_options;
1289 BlockDriverState *bs_snapshot;
1290 Error *local_err;
1291 int ret;
1293 /* if snapshot, we create a temporary backing file and open it
1294 instead of opening 'filename' directly */
1296 /* Get the required size from the image */
1297 total_size = bdrv_getlength(bs);
1298 if (total_size < 0) {
1299 ret = total_size;
1300 error_setg_errno(errp, -total_size, "Could not get image size");
1301 goto out;
1303 total_size &= BDRV_SECTOR_MASK;
1305 /* Create the temporary image */
1306 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1307 if (ret < 0) {
1308 error_setg_errno(errp, -ret, "Could not get temporary filename");
1309 goto out;
1312 bdrv_qcow2 = bdrv_find_format("qcow2");
1313 opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1314 &error_abort);
1315 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1316 ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1317 qemu_opts_del(opts);
1318 if (ret < 0) {
1319 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1320 "'%s': %s", tmp_filename,
1321 error_get_pretty(local_err));
1322 error_free(local_err);
1323 goto out;
1326 /* Prepare a new options QDict for the temporary file */
1327 snapshot_options = qdict_new();
1328 qdict_put(snapshot_options, "file.driver",
1329 qstring_from_str("file"));
1330 qdict_put(snapshot_options, "file.filename",
1331 qstring_from_str(tmp_filename));
1333 bs_snapshot = bdrv_new("", &error_abort);
1335 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1336 flags, bdrv_qcow2, &local_err);
1337 if (ret < 0) {
1338 error_propagate(errp, local_err);
1339 goto out;
1342 bdrv_append(bs_snapshot, bs);
1344 out:
1345 g_free(tmp_filename);
1346 return ret;
1350 * Opens a disk image (raw, qcow2, vmdk, ...)
1352 * options is a QDict of options to pass to the block drivers, or NULL for an
1353 * empty set of options. The reference to the QDict belongs to the block layer
1354 * after the call (even on failure), so if the caller intends to reuse the
1355 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1357 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1358 * If it is not NULL, the referenced BDS will be reused.
1360 * The reference parameter may be used to specify an existing block device which
1361 * should be opened. If specified, neither options nor a filename may be given,
1362 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1364 int bdrv_open(BlockDriverState **pbs, const char *filename,
1365 const char *reference, QDict *options, int flags,
1366 BlockDriver *drv, Error **errp)
1368 int ret;
1369 BlockDriverState *file = NULL, *bs;
1370 const char *drvname;
1371 Error *local_err = NULL;
1372 int snapshot_flags = 0;
1374 assert(pbs);
1376 if (reference) {
1377 bool options_non_empty = options ? qdict_size(options) : false;
1378 QDECREF(options);
1380 if (*pbs) {
1381 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1382 "another block device");
1383 return -EINVAL;
1386 if (filename || options_non_empty) {
1387 error_setg(errp, "Cannot reference an existing block device with "
1388 "additional options or a new filename");
1389 return -EINVAL;
1392 bs = bdrv_lookup_bs(reference, reference, errp);
1393 if (!bs) {
1394 return -ENODEV;
1396 bdrv_ref(bs);
1397 *pbs = bs;
1398 return 0;
1401 if (*pbs) {
1402 bs = *pbs;
1403 } else {
1404 bs = bdrv_new("", &error_abort);
1407 /* NULL means an empty set of options */
1408 if (options == NULL) {
1409 options = qdict_new();
1412 ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1413 if (local_err) {
1414 goto fail;
1417 /* Find the right image format driver */
1418 drv = NULL;
1419 drvname = qdict_get_try_str(options, "driver");
1420 if (drvname) {
1421 drv = bdrv_find_format(drvname);
1422 qdict_del(options, "driver");
1423 if (!drv) {
1424 error_setg(errp, "Unknown driver: '%s'", drvname);
1425 ret = -EINVAL;
1426 goto fail;
1430 assert(drvname || !(flags & BDRV_O_PROTOCOL));
1431 if (drv && !drv->bdrv_file_open) {
1432 /* If the user explicitly wants a format driver here, we'll need to add
1433 * another layer for the protocol in bs->file */
1434 flags &= ~BDRV_O_PROTOCOL;
1437 bs->options = options;
1438 options = qdict_clone_shallow(options);
1440 /* Open image file without format layer */
1441 if ((flags & BDRV_O_PROTOCOL) == 0) {
1442 if (flags & BDRV_O_RDWR) {
1443 flags |= BDRV_O_ALLOW_RDWR;
1445 if (flags & BDRV_O_SNAPSHOT) {
1446 snapshot_flags = bdrv_temp_snapshot_flags(flags);
1447 flags = bdrv_backing_flags(flags);
1450 assert(file == NULL);
1451 ret = bdrv_open_image(&file, filename, options, "file",
1452 bdrv_inherited_flags(flags),
1453 true, &local_err);
1454 if (ret < 0) {
1455 goto fail;
1459 /* Image format probing */
1460 if (!drv && file) {
1461 ret = find_image_format(file, filename, &drv, &local_err);
1462 if (ret < 0) {
1463 goto fail;
1465 } else if (!drv) {
1466 error_setg(errp, "Must specify either driver or file");
1467 ret = -EINVAL;
1468 goto fail;
1471 /* Open the image */
1472 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1473 if (ret < 0) {
1474 goto fail;
1477 if (file && (bs->file != file)) {
1478 bdrv_unref(file);
1479 file = NULL;
1482 /* If there is a backing file, use it */
1483 if ((flags & BDRV_O_NO_BACKING) == 0) {
1484 QDict *backing_options;
1486 qdict_extract_subqdict(options, &backing_options, "backing.");
1487 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1488 if (ret < 0) {
1489 goto close_and_fail;
1493 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1494 * temporary snapshot afterwards. */
1495 if (snapshot_flags) {
1496 ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1497 if (local_err) {
1498 goto close_and_fail;
1502 /* Check if any unknown options were used */
1503 if (options && (qdict_size(options) != 0)) {
1504 const QDictEntry *entry = qdict_first(options);
1505 if (flags & BDRV_O_PROTOCOL) {
1506 error_setg(errp, "Block protocol '%s' doesn't support the option "
1507 "'%s'", drv->format_name, entry->key);
1508 } else {
1509 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1510 "support the option '%s'", drv->format_name,
1511 bs->device_name, entry->key);
1514 ret = -EINVAL;
1515 goto close_and_fail;
1518 if (!bdrv_key_required(bs)) {
1519 bdrv_dev_change_media_cb(bs, true);
1520 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1521 && !runstate_check(RUN_STATE_INMIGRATE)
1522 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1523 error_setg(errp,
1524 "Guest must be stopped for opening of encrypted image");
1525 ret = -EBUSY;
1526 goto close_and_fail;
1529 QDECREF(options);
1530 *pbs = bs;
1531 return 0;
1533 fail:
1534 if (file != NULL) {
1535 bdrv_unref(file);
1537 QDECREF(bs->options);
1538 QDECREF(options);
1539 bs->options = NULL;
1540 if (!*pbs) {
1541 /* If *pbs is NULL, a new BDS has been created in this function and
1542 needs to be freed now. Otherwise, it does not need to be closed,
1543 since it has not really been opened yet. */
1544 bdrv_unref(bs);
1546 if (local_err) {
1547 error_propagate(errp, local_err);
1549 return ret;
1551 close_and_fail:
1552 /* See fail path, but now the BDS has to be always closed */
1553 if (*pbs) {
1554 bdrv_close(bs);
1555 } else {
1556 bdrv_unref(bs);
1558 QDECREF(options);
1559 if (local_err) {
1560 error_propagate(errp, local_err);
1562 return ret;
1565 typedef struct BlockReopenQueueEntry {
1566 bool prepared;
1567 BDRVReopenState state;
1568 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1569 } BlockReopenQueueEntry;
1572 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1573 * reopen of multiple devices.
1575 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1576 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1577 * be created and initialized. This newly created BlockReopenQueue should be
1578 * passed back in for subsequent calls that are intended to be of the same
1579 * atomic 'set'.
1581 * bs is the BlockDriverState to add to the reopen queue.
1583 * flags contains the open flags for the associated bs
1585 * returns a pointer to bs_queue, which is either the newly allocated
1586 * bs_queue, or the existing bs_queue being used.
1589 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1590 BlockDriverState *bs, int flags)
1592 assert(bs != NULL);
1594 BlockReopenQueueEntry *bs_entry;
1595 if (bs_queue == NULL) {
1596 bs_queue = g_new0(BlockReopenQueue, 1);
1597 QSIMPLEQ_INIT(bs_queue);
1600 /* bdrv_open() masks this flag out */
1601 flags &= ~BDRV_O_PROTOCOL;
1603 if (bs->file) {
1604 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1607 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1608 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1610 bs_entry->state.bs = bs;
1611 bs_entry->state.flags = flags;
1613 return bs_queue;
1617 * Reopen multiple BlockDriverStates atomically & transactionally.
1619 * The queue passed in (bs_queue) must have been built up previous
1620 * via bdrv_reopen_queue().
1622 * Reopens all BDS specified in the queue, with the appropriate
1623 * flags. All devices are prepared for reopen, and failure of any
1624 * device will cause all device changes to be abandonded, and intermediate
1625 * data cleaned up.
1627 * If all devices prepare successfully, then the changes are committed
1628 * to all devices.
1631 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1633 int ret = -1;
1634 BlockReopenQueueEntry *bs_entry, *next;
1635 Error *local_err = NULL;
1637 assert(bs_queue != NULL);
1639 bdrv_drain_all();
1641 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1642 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1643 error_propagate(errp, local_err);
1644 goto cleanup;
1646 bs_entry->prepared = true;
1649 /* If we reach this point, we have success and just need to apply the
1650 * changes
1652 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1653 bdrv_reopen_commit(&bs_entry->state);
1656 ret = 0;
1658 cleanup:
1659 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1660 if (ret && bs_entry->prepared) {
1661 bdrv_reopen_abort(&bs_entry->state);
1663 g_free(bs_entry);
1665 g_free(bs_queue);
1666 return ret;
1670 /* Reopen a single BlockDriverState with the specified flags. */
1671 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1673 int ret = -1;
1674 Error *local_err = NULL;
1675 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1677 ret = bdrv_reopen_multiple(queue, &local_err);
1678 if (local_err != NULL) {
1679 error_propagate(errp, local_err);
1681 return ret;
1686 * Prepares a BlockDriverState for reopen. All changes are staged in the
1687 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1688 * the block driver layer .bdrv_reopen_prepare()
1690 * bs is the BlockDriverState to reopen
1691 * flags are the new open flags
1692 * queue is the reopen queue
1694 * Returns 0 on success, non-zero on error. On error errp will be set
1695 * as well.
1697 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1698 * It is the responsibility of the caller to then call the abort() or
1699 * commit() for any other BDS that have been left in a prepare() state
1702 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1703 Error **errp)
1705 int ret = -1;
1706 Error *local_err = NULL;
1707 BlockDriver *drv;
1709 assert(reopen_state != NULL);
1710 assert(reopen_state->bs->drv != NULL);
1711 drv = reopen_state->bs->drv;
1713 /* if we are to stay read-only, do not allow permission change
1714 * to r/w */
1715 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1716 reopen_state->flags & BDRV_O_RDWR) {
1717 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1718 reopen_state->bs->device_name);
1719 goto error;
1723 ret = bdrv_flush(reopen_state->bs);
1724 if (ret) {
1725 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1726 strerror(-ret));
1727 goto error;
1730 if (drv->bdrv_reopen_prepare) {
1731 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1732 if (ret) {
1733 if (local_err != NULL) {
1734 error_propagate(errp, local_err);
1735 } else {
1736 error_setg(errp, "failed while preparing to reopen image '%s'",
1737 reopen_state->bs->filename);
1739 goto error;
1741 } else {
1742 /* It is currently mandatory to have a bdrv_reopen_prepare()
1743 * handler for each supported drv. */
1744 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1745 drv->format_name, reopen_state->bs->device_name,
1746 "reopening of file");
1747 ret = -1;
1748 goto error;
1751 ret = 0;
1753 error:
1754 return ret;
1758 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1759 * makes them final by swapping the staging BlockDriverState contents into
1760 * the active BlockDriverState contents.
1762 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1764 BlockDriver *drv;
1766 assert(reopen_state != NULL);
1767 drv = reopen_state->bs->drv;
1768 assert(drv != NULL);
1770 /* If there are any driver level actions to take */
1771 if (drv->bdrv_reopen_commit) {
1772 drv->bdrv_reopen_commit(reopen_state);
1775 /* set BDS specific flags now */
1776 reopen_state->bs->open_flags = reopen_state->flags;
1777 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1778 BDRV_O_CACHE_WB);
1779 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1781 bdrv_refresh_limits(reopen_state->bs);
1785 * Abort the reopen, and delete and free the staged changes in
1786 * reopen_state
1788 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1790 BlockDriver *drv;
1792 assert(reopen_state != NULL);
1793 drv = reopen_state->bs->drv;
1794 assert(drv != NULL);
1796 if (drv->bdrv_reopen_abort) {
1797 drv->bdrv_reopen_abort(reopen_state);
1802 void bdrv_close(BlockDriverState *bs)
1804 if (bs->job) {
1805 block_job_cancel_sync(bs->job);
1807 bdrv_drain_all(); /* complete I/O */
1808 bdrv_flush(bs);
1809 bdrv_drain_all(); /* in case flush left pending I/O */
1810 notifier_list_notify(&bs->close_notifiers, bs);
1812 if (bs->drv) {
1813 if (bs->backing_hd) {
1814 BlockDriverState *backing_hd = bs->backing_hd;
1815 bdrv_set_backing_hd(bs, NULL);
1816 bdrv_unref(backing_hd);
1818 bs->drv->bdrv_close(bs);
1819 g_free(bs->opaque);
1820 bs->opaque = NULL;
1821 bs->drv = NULL;
1822 bs->copy_on_read = 0;
1823 bs->backing_file[0] = '\0';
1824 bs->backing_format[0] = '\0';
1825 bs->total_sectors = 0;
1826 bs->encrypted = 0;
1827 bs->valid_key = 0;
1828 bs->sg = 0;
1829 bs->growable = 0;
1830 bs->zero_beyond_eof = false;
1831 QDECREF(bs->options);
1832 bs->options = NULL;
1834 if (bs->file != NULL) {
1835 bdrv_unref(bs->file);
1836 bs->file = NULL;
1840 bdrv_dev_change_media_cb(bs, false);
1842 /*throttling disk I/O limits*/
1843 if (bs->io_limits_enabled) {
1844 bdrv_io_limits_disable(bs);
1848 void bdrv_close_all(void)
1850 BlockDriverState *bs;
1852 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1853 AioContext *aio_context = bdrv_get_aio_context(bs);
1855 aio_context_acquire(aio_context);
1856 bdrv_close(bs);
1857 aio_context_release(aio_context);
1861 /* Check if any requests are in-flight (including throttled requests) */
1862 static bool bdrv_requests_pending(BlockDriverState *bs)
1864 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1865 return true;
1867 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1868 return true;
1870 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1871 return true;
1873 if (bs->file && bdrv_requests_pending(bs->file)) {
1874 return true;
1876 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1877 return true;
1879 return false;
1883 * Wait for pending requests to complete across all BlockDriverStates
1885 * This function does not flush data to disk, use bdrv_flush_all() for that
1886 * after calling this function.
1888 * Note that completion of an asynchronous I/O operation can trigger any
1889 * number of other I/O operations on other devices---for example a coroutine
1890 * can be arbitrarily complex and a constant flow of I/O can come until the
1891 * coroutine is complete. Because of this, it is not possible to have a
1892 * function to drain a single device's I/O queue.
1894 void bdrv_drain_all(void)
1896 /* Always run first iteration so any pending completion BHs run */
1897 bool busy = true;
1898 BlockDriverState *bs;
1900 while (busy) {
1901 busy = false;
1903 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1904 AioContext *aio_context = bdrv_get_aio_context(bs);
1905 bool bs_busy;
1907 aio_context_acquire(aio_context);
1908 bdrv_flush_io_queue(bs);
1909 bdrv_start_throttled_reqs(bs);
1910 bs_busy = bdrv_requests_pending(bs);
1911 bs_busy |= aio_poll(aio_context, bs_busy);
1912 aio_context_release(aio_context);
1914 busy |= bs_busy;
1919 /* make a BlockDriverState anonymous by removing from bdrv_state and
1920 * graph_bdrv_state list.
1921 Also, NULL terminate the device_name to prevent double remove */
1922 void bdrv_make_anon(BlockDriverState *bs)
1924 if (bs->device_name[0] != '\0') {
1925 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1927 bs->device_name[0] = '\0';
1928 if (bs->node_name[0] != '\0') {
1929 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1931 bs->node_name[0] = '\0';
1934 static void bdrv_rebind(BlockDriverState *bs)
1936 if (bs->drv && bs->drv->bdrv_rebind) {
1937 bs->drv->bdrv_rebind(bs);
1941 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1942 BlockDriverState *bs_src)
1944 /* move some fields that need to stay attached to the device */
1946 /* dev info */
1947 bs_dest->dev_ops = bs_src->dev_ops;
1948 bs_dest->dev_opaque = bs_src->dev_opaque;
1949 bs_dest->dev = bs_src->dev;
1950 bs_dest->guest_block_size = bs_src->guest_block_size;
1951 bs_dest->copy_on_read = bs_src->copy_on_read;
1953 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1955 /* i/o throttled req */
1956 memcpy(&bs_dest->throttle_state,
1957 &bs_src->throttle_state,
1958 sizeof(ThrottleState));
1959 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1960 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1961 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1963 /* r/w error */
1964 bs_dest->on_read_error = bs_src->on_read_error;
1965 bs_dest->on_write_error = bs_src->on_write_error;
1967 /* i/o status */
1968 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1969 bs_dest->iostatus = bs_src->iostatus;
1971 /* dirty bitmap */
1972 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1974 /* reference count */
1975 bs_dest->refcnt = bs_src->refcnt;
1977 /* job */
1978 bs_dest->job = bs_src->job;
1980 /* keep the same entry in bdrv_states */
1981 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1982 bs_src->device_name);
1983 bs_dest->device_list = bs_src->device_list;
1984 memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1985 sizeof(bs_dest->op_blockers));
1989 * Swap bs contents for two image chains while they are live,
1990 * while keeping required fields on the BlockDriverState that is
1991 * actually attached to a device.
1993 * This will modify the BlockDriverState fields, and swap contents
1994 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1996 * bs_new is required to be anonymous.
1998 * This function does not create any image files.
2000 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2002 BlockDriverState tmp;
2004 /* The code needs to swap the node_name but simply swapping node_list won't
2005 * work so first remove the nodes from the graph list, do the swap then
2006 * insert them back if needed.
2008 if (bs_new->node_name[0] != '\0') {
2009 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2011 if (bs_old->node_name[0] != '\0') {
2012 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2015 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2016 assert(bs_new->device_name[0] == '\0');
2017 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2018 assert(bs_new->job == NULL);
2019 assert(bs_new->dev == NULL);
2020 assert(bs_new->io_limits_enabled == false);
2021 assert(!throttle_have_timer(&bs_new->throttle_state));
2023 tmp = *bs_new;
2024 *bs_new = *bs_old;
2025 *bs_old = tmp;
2027 /* there are some fields that should not be swapped, move them back */
2028 bdrv_move_feature_fields(&tmp, bs_old);
2029 bdrv_move_feature_fields(bs_old, bs_new);
2030 bdrv_move_feature_fields(bs_new, &tmp);
2032 /* bs_new shouldn't be in bdrv_states even after the swap! */
2033 assert(bs_new->device_name[0] == '\0');
2035 /* Check a few fields that should remain attached to the device */
2036 assert(bs_new->dev == NULL);
2037 assert(bs_new->job == NULL);
2038 assert(bs_new->io_limits_enabled == false);
2039 assert(!throttle_have_timer(&bs_new->throttle_state));
2041 /* insert the nodes back into the graph node list if needed */
2042 if (bs_new->node_name[0] != '\0') {
2043 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2045 if (bs_old->node_name[0] != '\0') {
2046 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2049 bdrv_rebind(bs_new);
2050 bdrv_rebind(bs_old);
2054 * Add new bs contents at the top of an image chain while the chain is
2055 * live, while keeping required fields on the top layer.
2057 * This will modify the BlockDriverState fields, and swap contents
2058 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2060 * bs_new is required to be anonymous.
2062 * This function does not create any image files.
2064 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2066 bdrv_swap(bs_new, bs_top);
2068 /* The contents of 'tmp' will become bs_top, as we are
2069 * swapping bs_new and bs_top contents. */
2070 bdrv_set_backing_hd(bs_top, bs_new);
2073 static void bdrv_delete(BlockDriverState *bs)
2075 assert(!bs->dev);
2076 assert(!bs->job);
2077 assert(bdrv_op_blocker_is_empty(bs));
2078 assert(!bs->refcnt);
2079 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2081 bdrv_close(bs);
2083 /* remove from list, if necessary */
2084 bdrv_make_anon(bs);
2086 g_free(bs);
2089 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2090 /* TODO change to DeviceState *dev when all users are qdevified */
2092 if (bs->dev) {
2093 return -EBUSY;
2095 bs->dev = dev;
2096 bdrv_iostatus_reset(bs);
2097 return 0;
2100 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2101 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2103 if (bdrv_attach_dev(bs, dev) < 0) {
2104 abort();
2108 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2109 /* TODO change to DeviceState *dev when all users are qdevified */
2111 assert(bs->dev == dev);
2112 bs->dev = NULL;
2113 bs->dev_ops = NULL;
2114 bs->dev_opaque = NULL;
2115 bs->guest_block_size = 512;
2118 /* TODO change to return DeviceState * when all users are qdevified */
2119 void *bdrv_get_attached_dev(BlockDriverState *bs)
2121 return bs->dev;
2124 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2125 void *opaque)
2127 bs->dev_ops = ops;
2128 bs->dev_opaque = opaque;
2131 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2133 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2134 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2135 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2136 if (tray_was_closed) {
2137 /* tray open */
2138 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2139 true, &error_abort);
2141 if (load) {
2142 /* tray close */
2143 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2144 false, &error_abort);
2149 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2151 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2154 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2156 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2157 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2161 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2163 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2164 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2166 return false;
2169 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2171 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2172 bs->dev_ops->resize_cb(bs->dev_opaque);
2176 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2178 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2179 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2181 return false;
2185 * Run consistency checks on an image
2187 * Returns 0 if the check could be completed (it doesn't mean that the image is
2188 * free of errors) or -errno when an internal error occurred. The results of the
2189 * check are stored in res.
2191 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2193 if (bs->drv->bdrv_check == NULL) {
2194 return -ENOTSUP;
2197 memset(res, 0, sizeof(*res));
2198 return bs->drv->bdrv_check(bs, res, fix);
2201 #define COMMIT_BUF_SECTORS 2048
2203 /* commit COW file into the raw image */
2204 int bdrv_commit(BlockDriverState *bs)
2206 BlockDriver *drv = bs->drv;
2207 int64_t sector, total_sectors, length, backing_length;
2208 int n, ro, open_flags;
2209 int ret = 0;
2210 uint8_t *buf = NULL;
2211 char filename[PATH_MAX];
2213 if (!drv)
2214 return -ENOMEDIUM;
2216 if (!bs->backing_hd) {
2217 return -ENOTSUP;
2220 if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2221 bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2222 return -EBUSY;
2225 ro = bs->backing_hd->read_only;
2226 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2227 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2228 open_flags = bs->backing_hd->open_flags;
2230 if (ro) {
2231 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2232 return -EACCES;
2236 length = bdrv_getlength(bs);
2237 if (length < 0) {
2238 ret = length;
2239 goto ro_cleanup;
2242 backing_length = bdrv_getlength(bs->backing_hd);
2243 if (backing_length < 0) {
2244 ret = backing_length;
2245 goto ro_cleanup;
2248 /* If our top snapshot is larger than the backing file image,
2249 * grow the backing file image if possible. If not possible,
2250 * we must return an error */
2251 if (length > backing_length) {
2252 ret = bdrv_truncate(bs->backing_hd, length);
2253 if (ret < 0) {
2254 goto ro_cleanup;
2258 total_sectors = length >> BDRV_SECTOR_BITS;
2259 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2261 for (sector = 0; sector < total_sectors; sector += n) {
2262 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2263 if (ret < 0) {
2264 goto ro_cleanup;
2266 if (ret) {
2267 ret = bdrv_read(bs, sector, buf, n);
2268 if (ret < 0) {
2269 goto ro_cleanup;
2272 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2273 if (ret < 0) {
2274 goto ro_cleanup;
2279 if (drv->bdrv_make_empty) {
2280 ret = drv->bdrv_make_empty(bs);
2281 if (ret < 0) {
2282 goto ro_cleanup;
2284 bdrv_flush(bs);
2288 * Make sure all data we wrote to the backing device is actually
2289 * stable on disk.
2291 if (bs->backing_hd) {
2292 bdrv_flush(bs->backing_hd);
2295 ret = 0;
2296 ro_cleanup:
2297 g_free(buf);
2299 if (ro) {
2300 /* ignoring error return here */
2301 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2304 return ret;
2307 int bdrv_commit_all(void)
2309 BlockDriverState *bs;
2311 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2312 AioContext *aio_context = bdrv_get_aio_context(bs);
2314 aio_context_acquire(aio_context);
2315 if (bs->drv && bs->backing_hd) {
2316 int ret = bdrv_commit(bs);
2317 if (ret < 0) {
2318 aio_context_release(aio_context);
2319 return ret;
2322 aio_context_release(aio_context);
2324 return 0;
2328 * Remove an active request from the tracked requests list
2330 * This function should be called when a tracked request is completing.
2332 static void tracked_request_end(BdrvTrackedRequest *req)
2334 if (req->serialising) {
2335 req->bs->serialising_in_flight--;
2338 QLIST_REMOVE(req, list);
2339 qemu_co_queue_restart_all(&req->wait_queue);
2343 * Add an active request to the tracked requests list
2345 static void tracked_request_begin(BdrvTrackedRequest *req,
2346 BlockDriverState *bs,
2347 int64_t offset,
2348 unsigned int bytes, bool is_write)
2350 *req = (BdrvTrackedRequest){
2351 .bs = bs,
2352 .offset = offset,
2353 .bytes = bytes,
2354 .is_write = is_write,
2355 .co = qemu_coroutine_self(),
2356 .serialising = false,
2357 .overlap_offset = offset,
2358 .overlap_bytes = bytes,
2361 qemu_co_queue_init(&req->wait_queue);
2363 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2366 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2368 int64_t overlap_offset = req->offset & ~(align - 1);
2369 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2370 - overlap_offset;
2372 if (!req->serialising) {
2373 req->bs->serialising_in_flight++;
2374 req->serialising = true;
2377 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2378 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2382 * Round a region to cluster boundaries
2384 void bdrv_round_to_clusters(BlockDriverState *bs,
2385 int64_t sector_num, int nb_sectors,
2386 int64_t *cluster_sector_num,
2387 int *cluster_nb_sectors)
2389 BlockDriverInfo bdi;
2391 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2392 *cluster_sector_num = sector_num;
2393 *cluster_nb_sectors = nb_sectors;
2394 } else {
2395 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2396 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2397 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2398 nb_sectors, c);
2402 static int bdrv_get_cluster_size(BlockDriverState *bs)
2404 BlockDriverInfo bdi;
2405 int ret;
2407 ret = bdrv_get_info(bs, &bdi);
2408 if (ret < 0 || bdi.cluster_size == 0) {
2409 return bs->request_alignment;
2410 } else {
2411 return bdi.cluster_size;
2415 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2416 int64_t offset, unsigned int bytes)
2418 /* aaaa bbbb */
2419 if (offset >= req->overlap_offset + req->overlap_bytes) {
2420 return false;
2422 /* bbbb aaaa */
2423 if (req->overlap_offset >= offset + bytes) {
2424 return false;
2426 return true;
2429 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2431 BlockDriverState *bs = self->bs;
2432 BdrvTrackedRequest *req;
2433 bool retry;
2434 bool waited = false;
2436 if (!bs->serialising_in_flight) {
2437 return false;
2440 do {
2441 retry = false;
2442 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2443 if (req == self || (!req->serialising && !self->serialising)) {
2444 continue;
2446 if (tracked_request_overlaps(req, self->overlap_offset,
2447 self->overlap_bytes))
2449 /* Hitting this means there was a reentrant request, for
2450 * example, a block driver issuing nested requests. This must
2451 * never happen since it means deadlock.
2453 assert(qemu_coroutine_self() != req->co);
2455 /* If the request is already (indirectly) waiting for us, or
2456 * will wait for us as soon as it wakes up, then just go on
2457 * (instead of producing a deadlock in the former case). */
2458 if (!req->waiting_for) {
2459 self->waiting_for = req;
2460 qemu_co_queue_wait(&req->wait_queue);
2461 self->waiting_for = NULL;
2462 retry = true;
2463 waited = true;
2464 break;
2468 } while (retry);
2470 return waited;
2474 * Return values:
2475 * 0 - success
2476 * -EINVAL - backing format specified, but no file
2477 * -ENOSPC - can't update the backing file because no space is left in the
2478 * image file header
2479 * -ENOTSUP - format driver doesn't support changing the backing file
2481 int bdrv_change_backing_file(BlockDriverState *bs,
2482 const char *backing_file, const char *backing_fmt)
2484 BlockDriver *drv = bs->drv;
2485 int ret;
2487 /* Backing file format doesn't make sense without a backing file */
2488 if (backing_fmt && !backing_file) {
2489 return -EINVAL;
2492 if (drv->bdrv_change_backing_file != NULL) {
2493 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2494 } else {
2495 ret = -ENOTSUP;
2498 if (ret == 0) {
2499 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2500 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2502 return ret;
2506 * Finds the image layer in the chain that has 'bs' as its backing file.
2508 * active is the current topmost image.
2510 * Returns NULL if bs is not found in active's image chain,
2511 * or if active == bs.
2513 * Returns the bottommost base image if bs == NULL.
2515 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2516 BlockDriverState *bs)
2518 while (active && bs != active->backing_hd) {
2519 active = active->backing_hd;
2522 return active;
2525 /* Given a BDS, searches for the base layer. */
2526 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
2528 return bdrv_find_overlay(bs, NULL);
2531 typedef struct BlkIntermediateStates {
2532 BlockDriverState *bs;
2533 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2534 } BlkIntermediateStates;
2538 * Drops images above 'base' up to and including 'top', and sets the image
2539 * above 'top' to have base as its backing file.
2541 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2542 * information in 'bs' can be properly updated.
2544 * E.g., this will convert the following chain:
2545 * bottom <- base <- intermediate <- top <- active
2547 * to
2549 * bottom <- base <- active
2551 * It is allowed for bottom==base, in which case it converts:
2553 * base <- intermediate <- top <- active
2555 * to
2557 * base <- active
2559 * If backing_file_str is non-NULL, it will be used when modifying top's
2560 * overlay image metadata.
2562 * Error conditions:
2563 * if active == top, that is considered an error
2566 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2567 BlockDriverState *base, const char *backing_file_str)
2569 BlockDriverState *intermediate;
2570 BlockDriverState *base_bs = NULL;
2571 BlockDriverState *new_top_bs = NULL;
2572 BlkIntermediateStates *intermediate_state, *next;
2573 int ret = -EIO;
2575 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2576 QSIMPLEQ_INIT(&states_to_delete);
2578 if (!top->drv || !base->drv) {
2579 goto exit;
2582 new_top_bs = bdrv_find_overlay(active, top);
2584 if (new_top_bs == NULL) {
2585 /* we could not find the image above 'top', this is an error */
2586 goto exit;
2589 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2590 * to do, no intermediate images */
2591 if (new_top_bs->backing_hd == base) {
2592 ret = 0;
2593 goto exit;
2596 intermediate = top;
2598 /* now we will go down through the list, and add each BDS we find
2599 * into our deletion queue, until we hit the 'base'
2601 while (intermediate) {
2602 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2603 intermediate_state->bs = intermediate;
2604 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2606 if (intermediate->backing_hd == base) {
2607 base_bs = intermediate->backing_hd;
2608 break;
2610 intermediate = intermediate->backing_hd;
2612 if (base_bs == NULL) {
2613 /* something went wrong, we did not end at the base. safely
2614 * unravel everything, and exit with error */
2615 goto exit;
2618 /* success - we can delete the intermediate states, and link top->base */
2619 backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
2620 ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
2621 base_bs->drv ? base_bs->drv->format_name : "");
2622 if (ret) {
2623 goto exit;
2625 bdrv_set_backing_hd(new_top_bs, base_bs);
2627 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2628 /* so that bdrv_close() does not recursively close the chain */
2629 bdrv_set_backing_hd(intermediate_state->bs, NULL);
2630 bdrv_unref(intermediate_state->bs);
2632 ret = 0;
2634 exit:
2635 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2636 g_free(intermediate_state);
2638 return ret;
2642 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2643 size_t size)
2645 int64_t len;
2647 if (size > INT_MAX) {
2648 return -EIO;
2651 if (!bdrv_is_inserted(bs))
2652 return -ENOMEDIUM;
2654 if (bs->growable)
2655 return 0;
2657 len = bdrv_getlength(bs);
2659 if (offset < 0)
2660 return -EIO;
2662 if ((offset > len) || (len - offset < size))
2663 return -EIO;
2665 return 0;
2668 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2669 int nb_sectors)
2671 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2672 return -EIO;
2675 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2676 nb_sectors * BDRV_SECTOR_SIZE);
2679 typedef struct RwCo {
2680 BlockDriverState *bs;
2681 int64_t offset;
2682 QEMUIOVector *qiov;
2683 bool is_write;
2684 int ret;
2685 BdrvRequestFlags flags;
2686 } RwCo;
2688 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2690 RwCo *rwco = opaque;
2692 if (!rwco->is_write) {
2693 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2694 rwco->qiov->size, rwco->qiov,
2695 rwco->flags);
2696 } else {
2697 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2698 rwco->qiov->size, rwco->qiov,
2699 rwco->flags);
2704 * Process a vectored synchronous request using coroutines
2706 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2707 QEMUIOVector *qiov, bool is_write,
2708 BdrvRequestFlags flags)
2710 Coroutine *co;
2711 RwCo rwco = {
2712 .bs = bs,
2713 .offset = offset,
2714 .qiov = qiov,
2715 .is_write = is_write,
2716 .ret = NOT_DONE,
2717 .flags = flags,
2721 * In sync call context, when the vcpu is blocked, this throttling timer
2722 * will not fire; so the I/O throttling function has to be disabled here
2723 * if it has been enabled.
2725 if (bs->io_limits_enabled) {
2726 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2727 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2728 bdrv_io_limits_disable(bs);
2731 if (qemu_in_coroutine()) {
2732 /* Fast-path if already in coroutine context */
2733 bdrv_rw_co_entry(&rwco);
2734 } else {
2735 AioContext *aio_context = bdrv_get_aio_context(bs);
2737 co = qemu_coroutine_create(bdrv_rw_co_entry);
2738 qemu_coroutine_enter(co, &rwco);
2739 while (rwco.ret == NOT_DONE) {
2740 aio_poll(aio_context, true);
2743 return rwco.ret;
2747 * Process a synchronous request using coroutines
2749 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2750 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2752 QEMUIOVector qiov;
2753 struct iovec iov = {
2754 .iov_base = (void *)buf,
2755 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2758 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2759 return -EINVAL;
2762 qemu_iovec_init_external(&qiov, &iov, 1);
2763 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2764 &qiov, is_write, flags);
2767 /* return < 0 if error. See bdrv_write() for the return codes */
2768 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2769 uint8_t *buf, int nb_sectors)
2771 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2774 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2775 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2776 uint8_t *buf, int nb_sectors)
2778 bool enabled;
2779 int ret;
2781 enabled = bs->io_limits_enabled;
2782 bs->io_limits_enabled = false;
2783 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2784 bs->io_limits_enabled = enabled;
2785 return ret;
2788 /* Return < 0 if error. Important errors are:
2789 -EIO generic I/O error (may happen for all errors)
2790 -ENOMEDIUM No media inserted.
2791 -EINVAL Invalid sector number or nb_sectors
2792 -EACCES Trying to write a read-only device
2794 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2795 const uint8_t *buf, int nb_sectors)
2797 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2800 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2801 int nb_sectors, BdrvRequestFlags flags)
2803 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2804 BDRV_REQ_ZERO_WRITE | flags);
2808 * Completely zero out a block device with the help of bdrv_write_zeroes.
2809 * The operation is sped up by checking the block status and only writing
2810 * zeroes to the device if they currently do not return zeroes. Optional
2811 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2813 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2815 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2817 int64_t target_size;
2818 int64_t ret, nb_sectors, sector_num = 0;
2819 int n;
2821 target_size = bdrv_getlength(bs);
2822 if (target_size < 0) {
2823 return target_size;
2825 target_size /= BDRV_SECTOR_SIZE;
2827 for (;;) {
2828 nb_sectors = target_size - sector_num;
2829 if (nb_sectors <= 0) {
2830 return 0;
2832 if (nb_sectors > INT_MAX) {
2833 nb_sectors = INT_MAX;
2835 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2836 if (ret < 0) {
2837 error_report("error getting block status at sector %" PRId64 ": %s",
2838 sector_num, strerror(-ret));
2839 return ret;
2841 if (ret & BDRV_BLOCK_ZERO) {
2842 sector_num += n;
2843 continue;
2845 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2846 if (ret < 0) {
2847 error_report("error writing zeroes at sector %" PRId64 ": %s",
2848 sector_num, strerror(-ret));
2849 return ret;
2851 sector_num += n;
2855 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2857 QEMUIOVector qiov;
2858 struct iovec iov = {
2859 .iov_base = (void *)buf,
2860 .iov_len = bytes,
2862 int ret;
2864 if (bytes < 0) {
2865 return -EINVAL;
2868 qemu_iovec_init_external(&qiov, &iov, 1);
2869 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2870 if (ret < 0) {
2871 return ret;
2874 return bytes;
2877 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2879 int ret;
2881 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2882 if (ret < 0) {
2883 return ret;
2886 return qiov->size;
2889 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2890 const void *buf, int bytes)
2892 QEMUIOVector qiov;
2893 struct iovec iov = {
2894 .iov_base = (void *) buf,
2895 .iov_len = bytes,
2898 if (bytes < 0) {
2899 return -EINVAL;
2902 qemu_iovec_init_external(&qiov, &iov, 1);
2903 return bdrv_pwritev(bs, offset, &qiov);
2907 * Writes to the file and ensures that no writes are reordered across this
2908 * request (acts as a barrier)
2910 * Returns 0 on success, -errno in error cases.
2912 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2913 const void *buf, int count)
2915 int ret;
2917 ret = bdrv_pwrite(bs, offset, buf, count);
2918 if (ret < 0) {
2919 return ret;
2922 /* No flush needed for cache modes that already do it */
2923 if (bs->enable_write_cache) {
2924 bdrv_flush(bs);
2927 return 0;
2930 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2931 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2933 /* Perform I/O through a temporary buffer so that users who scribble over
2934 * their read buffer while the operation is in progress do not end up
2935 * modifying the image file. This is critical for zero-copy guest I/O
2936 * where anything might happen inside guest memory.
2938 void *bounce_buffer;
2940 BlockDriver *drv = bs->drv;
2941 struct iovec iov;
2942 QEMUIOVector bounce_qiov;
2943 int64_t cluster_sector_num;
2944 int cluster_nb_sectors;
2945 size_t skip_bytes;
2946 int ret;
2948 /* Cover entire cluster so no additional backing file I/O is required when
2949 * allocating cluster in the image file.
2951 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2952 &cluster_sector_num, &cluster_nb_sectors);
2954 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2955 cluster_sector_num, cluster_nb_sectors);
2957 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2958 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2959 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2961 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2962 &bounce_qiov);
2963 if (ret < 0) {
2964 goto err;
2967 if (drv->bdrv_co_write_zeroes &&
2968 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2969 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2970 cluster_nb_sectors, 0);
2971 } else {
2972 /* This does not change the data on the disk, it is not necessary
2973 * to flush even in cache=writethrough mode.
2975 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2976 &bounce_qiov);
2979 if (ret < 0) {
2980 /* It might be okay to ignore write errors for guest requests. If this
2981 * is a deliberate copy-on-read then we don't want to ignore the error.
2982 * Simply report it in all cases.
2984 goto err;
2987 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2988 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2989 nb_sectors * BDRV_SECTOR_SIZE);
2991 err:
2992 qemu_vfree(bounce_buffer);
2993 return ret;
2997 * Forwards an already correctly aligned request to the BlockDriver. This
2998 * handles copy on read and zeroing after EOF; any other features must be
2999 * implemented by the caller.
3001 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3002 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3003 int64_t align, QEMUIOVector *qiov, int flags)
3005 BlockDriver *drv = bs->drv;
3006 int ret;
3008 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3009 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3011 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3012 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3014 /* Handle Copy on Read and associated serialisation */
3015 if (flags & BDRV_REQ_COPY_ON_READ) {
3016 /* If we touch the same cluster it counts as an overlap. This
3017 * guarantees that allocating writes will be serialized and not race
3018 * with each other for the same cluster. For example, in copy-on-read
3019 * it ensures that the CoR read and write operations are atomic and
3020 * guest writes cannot interleave between them. */
3021 mark_request_serialising(req, bdrv_get_cluster_size(bs));
3024 wait_serialising_requests(req);
3026 if (flags & BDRV_REQ_COPY_ON_READ) {
3027 int pnum;
3029 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3030 if (ret < 0) {
3031 goto out;
3034 if (!ret || pnum != nb_sectors) {
3035 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3036 goto out;
3040 /* Forward the request to the BlockDriver */
3041 if (!(bs->zero_beyond_eof && bs->growable)) {
3042 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3043 } else {
3044 /* Read zeros after EOF of growable BDSes */
3045 int64_t len, total_sectors, max_nb_sectors;
3047 len = bdrv_getlength(bs);
3048 if (len < 0) {
3049 ret = len;
3050 goto out;
3053 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3054 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3055 align >> BDRV_SECTOR_BITS);
3056 if (max_nb_sectors > 0) {
3057 ret = drv->bdrv_co_readv(bs, sector_num,
3058 MIN(nb_sectors, max_nb_sectors), qiov);
3059 } else {
3060 ret = 0;
3063 /* Reading beyond end of file is supposed to produce zeroes */
3064 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3065 uint64_t offset = MAX(0, total_sectors - sector_num);
3066 uint64_t bytes = (sector_num + nb_sectors - offset) *
3067 BDRV_SECTOR_SIZE;
3068 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3072 out:
3073 return ret;
3077 * Handle a read request in coroutine context
3079 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3080 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3081 BdrvRequestFlags flags)
3083 BlockDriver *drv = bs->drv;
3084 BdrvTrackedRequest req;
3086 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3087 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3088 uint8_t *head_buf = NULL;
3089 uint8_t *tail_buf = NULL;
3090 QEMUIOVector local_qiov;
3091 bool use_local_qiov = false;
3092 int ret;
3094 if (!drv) {
3095 return -ENOMEDIUM;
3097 if (bdrv_check_byte_request(bs, offset, bytes)) {
3098 return -EIO;
3101 if (bs->copy_on_read) {
3102 flags |= BDRV_REQ_COPY_ON_READ;
3105 /* throttling disk I/O */
3106 if (bs->io_limits_enabled) {
3107 bdrv_io_limits_intercept(bs, bytes, false);
3110 /* Align read if necessary by padding qiov */
3111 if (offset & (align - 1)) {
3112 head_buf = qemu_blockalign(bs, align);
3113 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3114 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3115 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3116 use_local_qiov = true;
3118 bytes += offset & (align - 1);
3119 offset = offset & ~(align - 1);
3122 if ((offset + bytes) & (align - 1)) {
3123 if (!use_local_qiov) {
3124 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3125 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3126 use_local_qiov = true;
3128 tail_buf = qemu_blockalign(bs, align);
3129 qemu_iovec_add(&local_qiov, tail_buf,
3130 align - ((offset + bytes) & (align - 1)));
3132 bytes = ROUND_UP(bytes, align);
3135 tracked_request_begin(&req, bs, offset, bytes, false);
3136 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3137 use_local_qiov ? &local_qiov : qiov,
3138 flags);
3139 tracked_request_end(&req);
3141 if (use_local_qiov) {
3142 qemu_iovec_destroy(&local_qiov);
3143 qemu_vfree(head_buf);
3144 qemu_vfree(tail_buf);
3147 return ret;
3150 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3151 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3152 BdrvRequestFlags flags)
3154 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3155 return -EINVAL;
3158 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3159 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3162 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3163 int nb_sectors, QEMUIOVector *qiov)
3165 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3167 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3170 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3171 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3173 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3175 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3176 BDRV_REQ_COPY_ON_READ);
3179 /* if no limit is specified in the BlockLimits use a default
3180 * of 32768 512-byte sectors (16 MiB) per request.
3182 #define MAX_WRITE_ZEROES_DEFAULT 32768
3184 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3185 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3187 BlockDriver *drv = bs->drv;
3188 QEMUIOVector qiov;
3189 struct iovec iov = {0};
3190 int ret = 0;
3192 int max_write_zeroes = bs->bl.max_write_zeroes ?
3193 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3195 while (nb_sectors > 0 && !ret) {
3196 int num = nb_sectors;
3198 /* Align request. Block drivers can expect the "bulk" of the request
3199 * to be aligned.
3201 if (bs->bl.write_zeroes_alignment
3202 && num > bs->bl.write_zeroes_alignment) {
3203 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3204 /* Make a small request up to the first aligned sector. */
3205 num = bs->bl.write_zeroes_alignment;
3206 num -= sector_num % bs->bl.write_zeroes_alignment;
3207 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3208 /* Shorten the request to the last aligned sector. num cannot
3209 * underflow because num > bs->bl.write_zeroes_alignment.
3211 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3215 /* limit request size */
3216 if (num > max_write_zeroes) {
3217 num = max_write_zeroes;
3220 ret = -ENOTSUP;
3221 /* First try the efficient write zeroes operation */
3222 if (drv->bdrv_co_write_zeroes) {
3223 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3226 if (ret == -ENOTSUP) {
3227 /* Fall back to bounce buffer if write zeroes is unsupported */
3228 iov.iov_len = num * BDRV_SECTOR_SIZE;
3229 if (iov.iov_base == NULL) {
3230 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3231 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3233 qemu_iovec_init_external(&qiov, &iov, 1);
3235 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3237 /* Keep bounce buffer around if it is big enough for all
3238 * all future requests.
3240 if (num < max_write_zeroes) {
3241 qemu_vfree(iov.iov_base);
3242 iov.iov_base = NULL;
3246 sector_num += num;
3247 nb_sectors -= num;
3250 qemu_vfree(iov.iov_base);
3251 return ret;
3255 * Forwards an already correctly aligned write request to the BlockDriver.
3257 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3258 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3259 QEMUIOVector *qiov, int flags)
3261 BlockDriver *drv = bs->drv;
3262 bool waited;
3263 int ret;
3265 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3266 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3268 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3269 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3271 waited = wait_serialising_requests(req);
3272 assert(!waited || !req->serialising);
3273 assert(req->overlap_offset <= offset);
3274 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3276 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3278 if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3279 !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3280 qemu_iovec_is_zero(qiov)) {
3281 flags |= BDRV_REQ_ZERO_WRITE;
3282 if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3283 flags |= BDRV_REQ_MAY_UNMAP;
3287 if (ret < 0) {
3288 /* Do nothing, write notifier decided to fail this request */
3289 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3290 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3291 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3292 } else {
3293 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3294 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3296 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3298 if (ret == 0 && !bs->enable_write_cache) {
3299 ret = bdrv_co_flush(bs);
3302 bdrv_set_dirty(bs, sector_num, nb_sectors);
3304 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3305 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3307 if (bs->growable && ret >= 0) {
3308 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3311 return ret;
3315 * Handle a write request in coroutine context
3317 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3318 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3319 BdrvRequestFlags flags)
3321 BdrvTrackedRequest req;
3322 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3323 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3324 uint8_t *head_buf = NULL;
3325 uint8_t *tail_buf = NULL;
3326 QEMUIOVector local_qiov;
3327 bool use_local_qiov = false;
3328 int ret;
3330 if (!bs->drv) {
3331 return -ENOMEDIUM;
3333 if (bs->read_only) {
3334 return -EACCES;
3336 if (bdrv_check_byte_request(bs, offset, bytes)) {
3337 return -EIO;
3340 /* throttling disk I/O */
3341 if (bs->io_limits_enabled) {
3342 bdrv_io_limits_intercept(bs, bytes, true);
3346 * Align write if necessary by performing a read-modify-write cycle.
3347 * Pad qiov with the read parts and be sure to have a tracked request not
3348 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3350 tracked_request_begin(&req, bs, offset, bytes, true);
3352 if (offset & (align - 1)) {
3353 QEMUIOVector head_qiov;
3354 struct iovec head_iov;
3356 mark_request_serialising(&req, align);
3357 wait_serialising_requests(&req);
3359 head_buf = qemu_blockalign(bs, align);
3360 head_iov = (struct iovec) {
3361 .iov_base = head_buf,
3362 .iov_len = align,
3364 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3366 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3367 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3368 align, &head_qiov, 0);
3369 if (ret < 0) {
3370 goto fail;
3372 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3374 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3375 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3376 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3377 use_local_qiov = true;
3379 bytes += offset & (align - 1);
3380 offset = offset & ~(align - 1);
3383 if ((offset + bytes) & (align - 1)) {
3384 QEMUIOVector tail_qiov;
3385 struct iovec tail_iov;
3386 size_t tail_bytes;
3387 bool waited;
3389 mark_request_serialising(&req, align);
3390 waited = wait_serialising_requests(&req);
3391 assert(!waited || !use_local_qiov);
3393 tail_buf = qemu_blockalign(bs, align);
3394 tail_iov = (struct iovec) {
3395 .iov_base = tail_buf,
3396 .iov_len = align,
3398 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3400 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3401 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3402 align, &tail_qiov, 0);
3403 if (ret < 0) {
3404 goto fail;
3406 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3408 if (!use_local_qiov) {
3409 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3410 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3411 use_local_qiov = true;
3414 tail_bytes = (offset + bytes) & (align - 1);
3415 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3417 bytes = ROUND_UP(bytes, align);
3420 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3421 use_local_qiov ? &local_qiov : qiov,
3422 flags);
3424 fail:
3425 tracked_request_end(&req);
3427 if (use_local_qiov) {
3428 qemu_iovec_destroy(&local_qiov);
3430 qemu_vfree(head_buf);
3431 qemu_vfree(tail_buf);
3433 return ret;
3436 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3437 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3438 BdrvRequestFlags flags)
3440 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3441 return -EINVAL;
3444 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3445 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3448 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3449 int nb_sectors, QEMUIOVector *qiov)
3451 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3453 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3456 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3457 int64_t sector_num, int nb_sectors,
3458 BdrvRequestFlags flags)
3460 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3462 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3463 flags &= ~BDRV_REQ_MAY_UNMAP;
3466 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3467 BDRV_REQ_ZERO_WRITE | flags);
3471 * Truncate file to 'offset' bytes (needed only for file protocols)
3473 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3475 BlockDriver *drv = bs->drv;
3476 int ret;
3477 if (!drv)
3478 return -ENOMEDIUM;
3479 if (!drv->bdrv_truncate)
3480 return -ENOTSUP;
3481 if (bs->read_only)
3482 return -EACCES;
3484 ret = drv->bdrv_truncate(bs, offset);
3485 if (ret == 0) {
3486 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3487 bdrv_dev_resize_cb(bs);
3489 return ret;
3493 * Length of a allocated file in bytes. Sparse files are counted by actual
3494 * allocated space. Return < 0 if error or unknown.
3496 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3498 BlockDriver *drv = bs->drv;
3499 if (!drv) {
3500 return -ENOMEDIUM;
3502 if (drv->bdrv_get_allocated_file_size) {
3503 return drv->bdrv_get_allocated_file_size(bs);
3505 if (bs->file) {
3506 return bdrv_get_allocated_file_size(bs->file);
3508 return -ENOTSUP;
3512 * Length of a file in bytes. Return < 0 if error or unknown.
3514 int64_t bdrv_getlength(BlockDriverState *bs)
3516 BlockDriver *drv = bs->drv;
3517 if (!drv)
3518 return -ENOMEDIUM;
3520 if (drv->has_variable_length) {
3521 int ret = refresh_total_sectors(bs, bs->total_sectors);
3522 if (ret < 0) {
3523 return ret;
3526 return bs->total_sectors * BDRV_SECTOR_SIZE;
3529 /* return 0 as number of sectors if no device present or error */
3530 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3532 int64_t length;
3533 length = bdrv_getlength(bs);
3534 if (length < 0)
3535 length = 0;
3536 else
3537 length = length >> BDRV_SECTOR_BITS;
3538 *nb_sectors_ptr = length;
3541 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3542 BlockdevOnError on_write_error)
3544 bs->on_read_error = on_read_error;
3545 bs->on_write_error = on_write_error;
3548 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3550 return is_read ? bs->on_read_error : bs->on_write_error;
3553 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3555 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3557 switch (on_err) {
3558 case BLOCKDEV_ON_ERROR_ENOSPC:
3559 return (error == ENOSPC) ?
3560 BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3561 case BLOCKDEV_ON_ERROR_STOP:
3562 return BLOCK_ERROR_ACTION_STOP;
3563 case BLOCKDEV_ON_ERROR_REPORT:
3564 return BLOCK_ERROR_ACTION_REPORT;
3565 case BLOCKDEV_ON_ERROR_IGNORE:
3566 return BLOCK_ERROR_ACTION_IGNORE;
3567 default:
3568 abort();
3572 /* This is done by device models because, while the block layer knows
3573 * about the error, it does not know whether an operation comes from
3574 * the device or the block layer (from a job, for example).
3576 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3577 bool is_read, int error)
3579 assert(error >= 0);
3581 if (action == BLOCK_ERROR_ACTION_STOP) {
3582 /* First set the iostatus, so that "info block" returns an iostatus
3583 * that matches the events raised so far (an additional error iostatus
3584 * is fine, but not a lost one).
3586 bdrv_iostatus_set_err(bs, error);
3588 /* Then raise the request to stop the VM and the event.
3589 * qemu_system_vmstop_request_prepare has two effects. First,
3590 * it ensures that the STOP event always comes after the
3591 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3592 * can observe the STOP event and do a "cont" before the STOP
3593 * event is issued, the VM will not stop. In this case, vm_start()
3594 * also ensures that the STOP/RESUME pair of events is emitted.
3596 qemu_system_vmstop_request_prepare();
3597 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3598 is_read ? IO_OPERATION_TYPE_READ :
3599 IO_OPERATION_TYPE_WRITE,
3600 action, &error_abort);
3601 qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3602 } else {
3603 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3604 is_read ? IO_OPERATION_TYPE_READ :
3605 IO_OPERATION_TYPE_WRITE,
3606 action, &error_abort);
3610 int bdrv_is_read_only(BlockDriverState *bs)
3612 return bs->read_only;
3615 int bdrv_is_sg(BlockDriverState *bs)
3617 return bs->sg;
3620 int bdrv_enable_write_cache(BlockDriverState *bs)
3622 return bs->enable_write_cache;
3625 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3627 bs->enable_write_cache = wce;
3629 /* so a reopen() will preserve wce */
3630 if (wce) {
3631 bs->open_flags |= BDRV_O_CACHE_WB;
3632 } else {
3633 bs->open_flags &= ~BDRV_O_CACHE_WB;
3637 int bdrv_is_encrypted(BlockDriverState *bs)
3639 if (bs->backing_hd && bs->backing_hd->encrypted)
3640 return 1;
3641 return bs->encrypted;
3644 int bdrv_key_required(BlockDriverState *bs)
3646 BlockDriverState *backing_hd = bs->backing_hd;
3648 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3649 return 1;
3650 return (bs->encrypted && !bs->valid_key);
3653 int bdrv_set_key(BlockDriverState *bs, const char *key)
3655 int ret;
3656 if (bs->backing_hd && bs->backing_hd->encrypted) {
3657 ret = bdrv_set_key(bs->backing_hd, key);
3658 if (ret < 0)
3659 return ret;
3660 if (!bs->encrypted)
3661 return 0;
3663 if (!bs->encrypted) {
3664 return -EINVAL;
3665 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3666 return -ENOMEDIUM;
3668 ret = bs->drv->bdrv_set_key(bs, key);
3669 if (ret < 0) {
3670 bs->valid_key = 0;
3671 } else if (!bs->valid_key) {
3672 bs->valid_key = 1;
3673 /* call the change callback now, we skipped it on open */
3674 bdrv_dev_change_media_cb(bs, true);
3676 return ret;
3679 const char *bdrv_get_format_name(BlockDriverState *bs)
3681 return bs->drv ? bs->drv->format_name : NULL;
3684 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3685 void *opaque)
3687 BlockDriver *drv;
3688 int count = 0;
3689 const char **formats = NULL;
3691 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3692 if (drv->format_name) {
3693 bool found = false;
3694 int i = count;
3695 while (formats && i && !found) {
3696 found = !strcmp(formats[--i], drv->format_name);
3699 if (!found) {
3700 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3701 formats[count++] = drv->format_name;
3702 it(opaque, drv->format_name);
3706 g_free(formats);
3709 /* This function is to find block backend bs */
3710 BlockDriverState *bdrv_find(const char *name)
3712 BlockDriverState *bs;
3714 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3715 if (!strcmp(name, bs->device_name)) {
3716 return bs;
3719 return NULL;
3722 /* This function is to find a node in the bs graph */
3723 BlockDriverState *bdrv_find_node(const char *node_name)
3725 BlockDriverState *bs;
3727 assert(node_name);
3729 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3730 if (!strcmp(node_name, bs->node_name)) {
3731 return bs;
3734 return NULL;
3737 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3738 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3740 BlockDeviceInfoList *list, *entry;
3741 BlockDriverState *bs;
3743 list = NULL;
3744 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3745 entry = g_malloc0(sizeof(*entry));
3746 entry->value = bdrv_block_device_info(bs);
3747 entry->next = list;
3748 list = entry;
3751 return list;
3754 BlockDriverState *bdrv_lookup_bs(const char *device,
3755 const char *node_name,
3756 Error **errp)
3758 BlockDriverState *bs = NULL;
3760 if (device) {
3761 bs = bdrv_find(device);
3763 if (bs) {
3764 return bs;
3768 if (node_name) {
3769 bs = bdrv_find_node(node_name);
3771 if (bs) {
3772 return bs;
3776 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3777 device ? device : "",
3778 node_name ? node_name : "");
3779 return NULL;
3782 /* If 'base' is in the same chain as 'top', return true. Otherwise,
3783 * return false. If either argument is NULL, return false. */
3784 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base)
3786 while (top && top != base) {
3787 top = top->backing_hd;
3790 return top != NULL;
3793 BlockDriverState *bdrv_next(BlockDriverState *bs)
3795 if (!bs) {
3796 return QTAILQ_FIRST(&bdrv_states);
3798 return QTAILQ_NEXT(bs, device_list);
3801 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3803 BlockDriverState *bs;
3805 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3806 it(opaque, bs);
3810 const char *bdrv_get_device_name(BlockDriverState *bs)
3812 return bs->device_name;
3815 int bdrv_get_flags(BlockDriverState *bs)
3817 return bs->open_flags;
3820 int bdrv_flush_all(void)
3822 BlockDriverState *bs;
3823 int result = 0;
3825 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3826 AioContext *aio_context = bdrv_get_aio_context(bs);
3827 int ret;
3829 aio_context_acquire(aio_context);
3830 ret = bdrv_flush(bs);
3831 if (ret < 0 && !result) {
3832 result = ret;
3834 aio_context_release(aio_context);
3837 return result;
3840 int bdrv_has_zero_init_1(BlockDriverState *bs)
3842 return 1;
3845 int bdrv_has_zero_init(BlockDriverState *bs)
3847 assert(bs->drv);
3849 /* If BS is a copy on write image, it is initialized to
3850 the contents of the base image, which may not be zeroes. */
3851 if (bs->backing_hd) {
3852 return 0;
3854 if (bs->drv->bdrv_has_zero_init) {
3855 return bs->drv->bdrv_has_zero_init(bs);
3858 /* safe default */
3859 return 0;
3862 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3864 BlockDriverInfo bdi;
3866 if (bs->backing_hd) {
3867 return false;
3870 if (bdrv_get_info(bs, &bdi) == 0) {
3871 return bdi.unallocated_blocks_are_zero;
3874 return false;
3877 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3879 BlockDriverInfo bdi;
3881 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3882 return false;
3885 if (bdrv_get_info(bs, &bdi) == 0) {
3886 return bdi.can_write_zeroes_with_unmap;
3889 return false;
3892 typedef struct BdrvCoGetBlockStatusData {
3893 BlockDriverState *bs;
3894 BlockDriverState *base;
3895 int64_t sector_num;
3896 int nb_sectors;
3897 int *pnum;
3898 int64_t ret;
3899 bool done;
3900 } BdrvCoGetBlockStatusData;
3903 * Returns true iff the specified sector is present in the disk image. Drivers
3904 * not implementing the functionality are assumed to not support backing files,
3905 * hence all their sectors are reported as allocated.
3907 * If 'sector_num' is beyond the end of the disk image the return value is 0
3908 * and 'pnum' is set to 0.
3910 * 'pnum' is set to the number of sectors (including and immediately following
3911 * the specified sector) that are known to be in the same
3912 * allocated/unallocated state.
3914 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3915 * beyond the end of the disk image it will be clamped.
3917 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3918 int64_t sector_num,
3919 int nb_sectors, int *pnum)
3921 int64_t length;
3922 int64_t n;
3923 int64_t ret, ret2;
3925 length = bdrv_getlength(bs);
3926 if (length < 0) {
3927 return length;
3930 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3931 *pnum = 0;
3932 return 0;
3935 n = bs->total_sectors - sector_num;
3936 if (n < nb_sectors) {
3937 nb_sectors = n;
3940 if (!bs->drv->bdrv_co_get_block_status) {
3941 *pnum = nb_sectors;
3942 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3943 if (bs->drv->protocol_name) {
3944 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3946 return ret;
3949 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3950 if (ret < 0) {
3951 *pnum = 0;
3952 return ret;
3955 if (ret & BDRV_BLOCK_RAW) {
3956 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3957 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3958 *pnum, pnum);
3961 if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3962 ret |= BDRV_BLOCK_ALLOCATED;
3965 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3966 if (bdrv_unallocated_blocks_are_zero(bs)) {
3967 ret |= BDRV_BLOCK_ZERO;
3968 } else if (bs->backing_hd) {
3969 BlockDriverState *bs2 = bs->backing_hd;
3970 int64_t length2 = bdrv_getlength(bs2);
3971 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3972 ret |= BDRV_BLOCK_ZERO;
3977 if (bs->file &&
3978 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3979 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3980 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3981 *pnum, pnum);
3982 if (ret2 >= 0) {
3983 /* Ignore errors. This is just providing extra information, it
3984 * is useful but not necessary.
3986 ret |= (ret2 & BDRV_BLOCK_ZERO);
3990 return ret;
3993 /* Coroutine wrapper for bdrv_get_block_status() */
3994 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3996 BdrvCoGetBlockStatusData *data = opaque;
3997 BlockDriverState *bs = data->bs;
3999 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
4000 data->pnum);
4001 data->done = true;
4005 * Synchronous wrapper around bdrv_co_get_block_status().
4007 * See bdrv_co_get_block_status() for details.
4009 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4010 int nb_sectors, int *pnum)
4012 Coroutine *co;
4013 BdrvCoGetBlockStatusData data = {
4014 .bs = bs,
4015 .sector_num = sector_num,
4016 .nb_sectors = nb_sectors,
4017 .pnum = pnum,
4018 .done = false,
4021 if (qemu_in_coroutine()) {
4022 /* Fast-path if already in coroutine context */
4023 bdrv_get_block_status_co_entry(&data);
4024 } else {
4025 AioContext *aio_context = bdrv_get_aio_context(bs);
4027 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4028 qemu_coroutine_enter(co, &data);
4029 while (!data.done) {
4030 aio_poll(aio_context, true);
4033 return data.ret;
4036 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4037 int nb_sectors, int *pnum)
4039 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4040 if (ret < 0) {
4041 return ret;
4043 return (ret & BDRV_BLOCK_ALLOCATED);
4047 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4049 * Return true if the given sector is allocated in any image between
4050 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4051 * sector is allocated in any image of the chain. Return false otherwise.
4053 * 'pnum' is set to the number of sectors (including and immediately following
4054 * the specified sector) that are known to be in the same
4055 * allocated/unallocated state.
4058 int bdrv_is_allocated_above(BlockDriverState *top,
4059 BlockDriverState *base,
4060 int64_t sector_num,
4061 int nb_sectors, int *pnum)
4063 BlockDriverState *intermediate;
4064 int ret, n = nb_sectors;
4066 intermediate = top;
4067 while (intermediate && intermediate != base) {
4068 int pnum_inter;
4069 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4070 &pnum_inter);
4071 if (ret < 0) {
4072 return ret;
4073 } else if (ret) {
4074 *pnum = pnum_inter;
4075 return 1;
4079 * [sector_num, nb_sectors] is unallocated on top but intermediate
4080 * might have
4082 * [sector_num+x, nr_sectors] allocated.
4084 if (n > pnum_inter &&
4085 (intermediate == top ||
4086 sector_num + pnum_inter < intermediate->total_sectors)) {
4087 n = pnum_inter;
4090 intermediate = intermediate->backing_hd;
4093 *pnum = n;
4094 return 0;
4097 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4099 if (bs->backing_hd && bs->backing_hd->encrypted)
4100 return bs->backing_file;
4101 else if (bs->encrypted)
4102 return bs->filename;
4103 else
4104 return NULL;
4107 void bdrv_get_backing_filename(BlockDriverState *bs,
4108 char *filename, int filename_size)
4110 pstrcpy(filename, filename_size, bs->backing_file);
4113 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4114 const uint8_t *buf, int nb_sectors)
4116 BlockDriver *drv = bs->drv;
4117 if (!drv)
4118 return -ENOMEDIUM;
4119 if (!drv->bdrv_write_compressed)
4120 return -ENOTSUP;
4121 if (bdrv_check_request(bs, sector_num, nb_sectors))
4122 return -EIO;
4124 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4126 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4129 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4131 BlockDriver *drv = bs->drv;
4132 if (!drv)
4133 return -ENOMEDIUM;
4134 if (!drv->bdrv_get_info)
4135 return -ENOTSUP;
4136 memset(bdi, 0, sizeof(*bdi));
4137 return drv->bdrv_get_info(bs, bdi);
4140 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4142 BlockDriver *drv = bs->drv;
4143 if (drv && drv->bdrv_get_specific_info) {
4144 return drv->bdrv_get_specific_info(bs);
4146 return NULL;
4149 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4150 int64_t pos, int size)
4152 QEMUIOVector qiov;
4153 struct iovec iov = {
4154 .iov_base = (void *) buf,
4155 .iov_len = size,
4158 qemu_iovec_init_external(&qiov, &iov, 1);
4159 return bdrv_writev_vmstate(bs, &qiov, pos);
4162 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4164 BlockDriver *drv = bs->drv;
4166 if (!drv) {
4167 return -ENOMEDIUM;
4168 } else if (drv->bdrv_save_vmstate) {
4169 return drv->bdrv_save_vmstate(bs, qiov, pos);
4170 } else if (bs->file) {
4171 return bdrv_writev_vmstate(bs->file, qiov, pos);
4174 return -ENOTSUP;
4177 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4178 int64_t pos, int size)
4180 BlockDriver *drv = bs->drv;
4181 if (!drv)
4182 return -ENOMEDIUM;
4183 if (drv->bdrv_load_vmstate)
4184 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4185 if (bs->file)
4186 return bdrv_load_vmstate(bs->file, buf, pos, size);
4187 return -ENOTSUP;
4190 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4192 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4193 return;
4196 bs->drv->bdrv_debug_event(bs, event);
4199 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4200 const char *tag)
4202 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4203 bs = bs->file;
4206 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4207 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4210 return -ENOTSUP;
4213 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4215 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4216 bs = bs->file;
4219 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4220 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4223 return -ENOTSUP;
4226 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4228 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4229 bs = bs->file;
4232 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4233 return bs->drv->bdrv_debug_resume(bs, tag);
4236 return -ENOTSUP;
4239 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4241 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4242 bs = bs->file;
4245 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4246 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4249 return false;
4252 int bdrv_is_snapshot(BlockDriverState *bs)
4254 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4257 /* backing_file can either be relative, or absolute, or a protocol. If it is
4258 * relative, it must be relative to the chain. So, passing in bs->filename
4259 * from a BDS as backing_file should not be done, as that may be relative to
4260 * the CWD rather than the chain. */
4261 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4262 const char *backing_file)
4264 char *filename_full = NULL;
4265 char *backing_file_full = NULL;
4266 char *filename_tmp = NULL;
4267 int is_protocol = 0;
4268 BlockDriverState *curr_bs = NULL;
4269 BlockDriverState *retval = NULL;
4271 if (!bs || !bs->drv || !backing_file) {
4272 return NULL;
4275 filename_full = g_malloc(PATH_MAX);
4276 backing_file_full = g_malloc(PATH_MAX);
4277 filename_tmp = g_malloc(PATH_MAX);
4279 is_protocol = path_has_protocol(backing_file);
4281 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4283 /* If either of the filename paths is actually a protocol, then
4284 * compare unmodified paths; otherwise make paths relative */
4285 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4286 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4287 retval = curr_bs->backing_hd;
4288 break;
4290 } else {
4291 /* If not an absolute filename path, make it relative to the current
4292 * image's filename path */
4293 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4294 backing_file);
4296 /* We are going to compare absolute pathnames */
4297 if (!realpath(filename_tmp, filename_full)) {
4298 continue;
4301 /* We need to make sure the backing filename we are comparing against
4302 * is relative to the current image filename (or absolute) */
4303 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4304 curr_bs->backing_file);
4306 if (!realpath(filename_tmp, backing_file_full)) {
4307 continue;
4310 if (strcmp(backing_file_full, filename_full) == 0) {
4311 retval = curr_bs->backing_hd;
4312 break;
4317 g_free(filename_full);
4318 g_free(backing_file_full);
4319 g_free(filename_tmp);
4320 return retval;
4323 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4325 if (!bs->drv) {
4326 return 0;
4329 if (!bs->backing_hd) {
4330 return 0;
4333 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4336 /**************************************************************/
4337 /* async I/Os */
4339 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4340 QEMUIOVector *qiov, int nb_sectors,
4341 BlockDriverCompletionFunc *cb, void *opaque)
4343 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4345 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4346 cb, opaque, false);
4349 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4350 QEMUIOVector *qiov, int nb_sectors,
4351 BlockDriverCompletionFunc *cb, void *opaque)
4353 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4355 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4356 cb, opaque, true);
4359 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4360 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4361 BlockDriverCompletionFunc *cb, void *opaque)
4363 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4365 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4366 BDRV_REQ_ZERO_WRITE | flags,
4367 cb, opaque, true);
4371 typedef struct MultiwriteCB {
4372 int error;
4373 int num_requests;
4374 int num_callbacks;
4375 struct {
4376 BlockDriverCompletionFunc *cb;
4377 void *opaque;
4378 QEMUIOVector *free_qiov;
4379 } callbacks[];
4380 } MultiwriteCB;
4382 static void multiwrite_user_cb(MultiwriteCB *mcb)
4384 int i;
4386 for (i = 0; i < mcb->num_callbacks; i++) {
4387 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4388 if (mcb->callbacks[i].free_qiov) {
4389 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4391 g_free(mcb->callbacks[i].free_qiov);
4395 static void multiwrite_cb(void *opaque, int ret)
4397 MultiwriteCB *mcb = opaque;
4399 trace_multiwrite_cb(mcb, ret);
4401 if (ret < 0 && !mcb->error) {
4402 mcb->error = ret;
4405 mcb->num_requests--;
4406 if (mcb->num_requests == 0) {
4407 multiwrite_user_cb(mcb);
4408 g_free(mcb);
4412 static int multiwrite_req_compare(const void *a, const void *b)
4414 const BlockRequest *req1 = a, *req2 = b;
4417 * Note that we can't simply subtract req2->sector from req1->sector
4418 * here as that could overflow the return value.
4420 if (req1->sector > req2->sector) {
4421 return 1;
4422 } else if (req1->sector < req2->sector) {
4423 return -1;
4424 } else {
4425 return 0;
4430 * Takes a bunch of requests and tries to merge them. Returns the number of
4431 * requests that remain after merging.
4433 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4434 int num_reqs, MultiwriteCB *mcb)
4436 int i, outidx;
4438 // Sort requests by start sector
4439 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4441 // Check if adjacent requests touch the same clusters. If so, combine them,
4442 // filling up gaps with zero sectors.
4443 outidx = 0;
4444 for (i = 1; i < num_reqs; i++) {
4445 int merge = 0;
4446 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4448 // Handle exactly sequential writes and overlapping writes.
4449 if (reqs[i].sector <= oldreq_last) {
4450 merge = 1;
4453 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4454 merge = 0;
4457 if (merge) {
4458 size_t size;
4459 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4460 qemu_iovec_init(qiov,
4461 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4463 // Add the first request to the merged one. If the requests are
4464 // overlapping, drop the last sectors of the first request.
4465 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4466 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4468 // We should need to add any zeros between the two requests
4469 assert (reqs[i].sector <= oldreq_last);
4471 // Add the second request
4472 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4474 reqs[outidx].nb_sectors = qiov->size >> 9;
4475 reqs[outidx].qiov = qiov;
4477 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4478 } else {
4479 outidx++;
4480 reqs[outidx].sector = reqs[i].sector;
4481 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4482 reqs[outidx].qiov = reqs[i].qiov;
4486 return outidx + 1;
4490 * Submit multiple AIO write requests at once.
4492 * On success, the function returns 0 and all requests in the reqs array have
4493 * been submitted. In error case this function returns -1, and any of the
4494 * requests may or may not be submitted yet. In particular, this means that the
4495 * callback will be called for some of the requests, for others it won't. The
4496 * caller must check the error field of the BlockRequest to wait for the right
4497 * callbacks (if error != 0, no callback will be called).
4499 * The implementation may modify the contents of the reqs array, e.g. to merge
4500 * requests. However, the fields opaque and error are left unmodified as they
4501 * are used to signal failure for a single request to the caller.
4503 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4505 MultiwriteCB *mcb;
4506 int i;
4508 /* don't submit writes if we don't have a medium */
4509 if (bs->drv == NULL) {
4510 for (i = 0; i < num_reqs; i++) {
4511 reqs[i].error = -ENOMEDIUM;
4513 return -1;
4516 if (num_reqs == 0) {
4517 return 0;
4520 // Create MultiwriteCB structure
4521 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4522 mcb->num_requests = 0;
4523 mcb->num_callbacks = num_reqs;
4525 for (i = 0; i < num_reqs; i++) {
4526 mcb->callbacks[i].cb = reqs[i].cb;
4527 mcb->callbacks[i].opaque = reqs[i].opaque;
4530 // Check for mergable requests
4531 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4533 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4535 /* Run the aio requests. */
4536 mcb->num_requests = num_reqs;
4537 for (i = 0; i < num_reqs; i++) {
4538 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4539 reqs[i].nb_sectors, reqs[i].flags,
4540 multiwrite_cb, mcb,
4541 true);
4544 return 0;
4547 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4549 acb->aiocb_info->cancel(acb);
4552 /**************************************************************/
4553 /* async block device emulation */
4555 typedef struct BlockDriverAIOCBSync {
4556 BlockDriverAIOCB common;
4557 QEMUBH *bh;
4558 int ret;
4559 /* vector translation state */
4560 QEMUIOVector *qiov;
4561 uint8_t *bounce;
4562 int is_write;
4563 } BlockDriverAIOCBSync;
4565 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4567 BlockDriverAIOCBSync *acb =
4568 container_of(blockacb, BlockDriverAIOCBSync, common);
4569 qemu_bh_delete(acb->bh);
4570 acb->bh = NULL;
4571 qemu_aio_release(acb);
4574 static const AIOCBInfo bdrv_em_aiocb_info = {
4575 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4576 .cancel = bdrv_aio_cancel_em,
4579 static void bdrv_aio_bh_cb(void *opaque)
4581 BlockDriverAIOCBSync *acb = opaque;
4583 if (!acb->is_write)
4584 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4585 qemu_vfree(acb->bounce);
4586 acb->common.cb(acb->common.opaque, acb->ret);
4587 qemu_bh_delete(acb->bh);
4588 acb->bh = NULL;
4589 qemu_aio_release(acb);
4592 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4593 int64_t sector_num,
4594 QEMUIOVector *qiov,
4595 int nb_sectors,
4596 BlockDriverCompletionFunc *cb,
4597 void *opaque,
4598 int is_write)
4601 BlockDriverAIOCBSync *acb;
4603 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4604 acb->is_write = is_write;
4605 acb->qiov = qiov;
4606 acb->bounce = qemu_blockalign(bs, qiov->size);
4607 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4609 if (is_write) {
4610 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4611 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4612 } else {
4613 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4616 qemu_bh_schedule(acb->bh);
4618 return &acb->common;
4621 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4622 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4623 BlockDriverCompletionFunc *cb, void *opaque)
4625 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4628 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4629 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4630 BlockDriverCompletionFunc *cb, void *opaque)
4632 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4636 typedef struct BlockDriverAIOCBCoroutine {
4637 BlockDriverAIOCB common;
4638 BlockRequest req;
4639 bool is_write;
4640 bool *done;
4641 QEMUBH* bh;
4642 } BlockDriverAIOCBCoroutine;
4644 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4646 AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4647 BlockDriverAIOCBCoroutine *acb =
4648 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4649 bool done = false;
4651 acb->done = &done;
4652 while (!done) {
4653 aio_poll(aio_context, true);
4657 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4658 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4659 .cancel = bdrv_aio_co_cancel_em,
4662 static void bdrv_co_em_bh(void *opaque)
4664 BlockDriverAIOCBCoroutine *acb = opaque;
4666 acb->common.cb(acb->common.opaque, acb->req.error);
4668 if (acb->done) {
4669 *acb->done = true;
4672 qemu_bh_delete(acb->bh);
4673 qemu_aio_release(acb);
4676 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4677 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4679 BlockDriverAIOCBCoroutine *acb = opaque;
4680 BlockDriverState *bs = acb->common.bs;
4682 if (!acb->is_write) {
4683 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4684 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4685 } else {
4686 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4687 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4690 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4691 qemu_bh_schedule(acb->bh);
4694 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4695 int64_t sector_num,
4696 QEMUIOVector *qiov,
4697 int nb_sectors,
4698 BdrvRequestFlags flags,
4699 BlockDriverCompletionFunc *cb,
4700 void *opaque,
4701 bool is_write)
4703 Coroutine *co;
4704 BlockDriverAIOCBCoroutine *acb;
4706 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4707 acb->req.sector = sector_num;
4708 acb->req.nb_sectors = nb_sectors;
4709 acb->req.qiov = qiov;
4710 acb->req.flags = flags;
4711 acb->is_write = is_write;
4712 acb->done = NULL;
4714 co = qemu_coroutine_create(bdrv_co_do_rw);
4715 qemu_coroutine_enter(co, acb);
4717 return &acb->common;
4720 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4722 BlockDriverAIOCBCoroutine *acb = opaque;
4723 BlockDriverState *bs = acb->common.bs;
4725 acb->req.error = bdrv_co_flush(bs);
4726 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4727 qemu_bh_schedule(acb->bh);
4730 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4731 BlockDriverCompletionFunc *cb, void *opaque)
4733 trace_bdrv_aio_flush(bs, opaque);
4735 Coroutine *co;
4736 BlockDriverAIOCBCoroutine *acb;
4738 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4739 acb->done = NULL;
4741 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4742 qemu_coroutine_enter(co, acb);
4744 return &acb->common;
4747 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4749 BlockDriverAIOCBCoroutine *acb = opaque;
4750 BlockDriverState *bs = acb->common.bs;
4752 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4753 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4754 qemu_bh_schedule(acb->bh);
4757 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4758 int64_t sector_num, int nb_sectors,
4759 BlockDriverCompletionFunc *cb, void *opaque)
4761 Coroutine *co;
4762 BlockDriverAIOCBCoroutine *acb;
4764 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4766 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4767 acb->req.sector = sector_num;
4768 acb->req.nb_sectors = nb_sectors;
4769 acb->done = NULL;
4770 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4771 qemu_coroutine_enter(co, acb);
4773 return &acb->common;
4776 void bdrv_init(void)
4778 module_call_init(MODULE_INIT_BLOCK);
4781 void bdrv_init_with_whitelist(void)
4783 use_bdrv_whitelist = 1;
4784 bdrv_init();
4787 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4788 BlockDriverCompletionFunc *cb, void *opaque)
4790 BlockDriverAIOCB *acb;
4792 acb = g_slice_alloc(aiocb_info->aiocb_size);
4793 acb->aiocb_info = aiocb_info;
4794 acb->bs = bs;
4795 acb->cb = cb;
4796 acb->opaque = opaque;
4797 return acb;
4800 void qemu_aio_release(void *p)
4802 BlockDriverAIOCB *acb = p;
4803 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4806 /**************************************************************/
4807 /* Coroutine block device emulation */
4809 typedef struct CoroutineIOCompletion {
4810 Coroutine *coroutine;
4811 int ret;
4812 } CoroutineIOCompletion;
4814 static void bdrv_co_io_em_complete(void *opaque, int ret)
4816 CoroutineIOCompletion *co = opaque;
4818 co->ret = ret;
4819 qemu_coroutine_enter(co->coroutine, NULL);
4822 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4823 int nb_sectors, QEMUIOVector *iov,
4824 bool is_write)
4826 CoroutineIOCompletion co = {
4827 .coroutine = qemu_coroutine_self(),
4829 BlockDriverAIOCB *acb;
4831 if (is_write) {
4832 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4833 bdrv_co_io_em_complete, &co);
4834 } else {
4835 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4836 bdrv_co_io_em_complete, &co);
4839 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4840 if (!acb) {
4841 return -EIO;
4843 qemu_coroutine_yield();
4845 return co.ret;
4848 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4849 int64_t sector_num, int nb_sectors,
4850 QEMUIOVector *iov)
4852 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4855 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4856 int64_t sector_num, int nb_sectors,
4857 QEMUIOVector *iov)
4859 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4862 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4864 RwCo *rwco = opaque;
4866 rwco->ret = bdrv_co_flush(rwco->bs);
4869 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4871 int ret;
4873 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4874 return 0;
4877 /* Write back cached data to the OS even with cache=unsafe */
4878 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4879 if (bs->drv->bdrv_co_flush_to_os) {
4880 ret = bs->drv->bdrv_co_flush_to_os(bs);
4881 if (ret < 0) {
4882 return ret;
4886 /* But don't actually force it to the disk with cache=unsafe */
4887 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4888 goto flush_parent;
4891 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4892 if (bs->drv->bdrv_co_flush_to_disk) {
4893 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4894 } else if (bs->drv->bdrv_aio_flush) {
4895 BlockDriverAIOCB *acb;
4896 CoroutineIOCompletion co = {
4897 .coroutine = qemu_coroutine_self(),
4900 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4901 if (acb == NULL) {
4902 ret = -EIO;
4903 } else {
4904 qemu_coroutine_yield();
4905 ret = co.ret;
4907 } else {
4909 * Some block drivers always operate in either writethrough or unsafe
4910 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4911 * know how the server works (because the behaviour is hardcoded or
4912 * depends on server-side configuration), so we can't ensure that
4913 * everything is safe on disk. Returning an error doesn't work because
4914 * that would break guests even if the server operates in writethrough
4915 * mode.
4917 * Let's hope the user knows what he's doing.
4919 ret = 0;
4921 if (ret < 0) {
4922 return ret;
4925 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4926 * in the case of cache=unsafe, so there are no useless flushes.
4928 flush_parent:
4929 return bdrv_co_flush(bs->file);
4932 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4934 Error *local_err = NULL;
4935 int ret;
4937 if (!bs->drv) {
4938 return;
4941 if (bs->drv->bdrv_invalidate_cache) {
4942 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4943 } else if (bs->file) {
4944 bdrv_invalidate_cache(bs->file, &local_err);
4946 if (local_err) {
4947 error_propagate(errp, local_err);
4948 return;
4951 ret = refresh_total_sectors(bs, bs->total_sectors);
4952 if (ret < 0) {
4953 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4954 return;
4958 void bdrv_invalidate_cache_all(Error **errp)
4960 BlockDriverState *bs;
4961 Error *local_err = NULL;
4963 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4964 AioContext *aio_context = bdrv_get_aio_context(bs);
4966 aio_context_acquire(aio_context);
4967 bdrv_invalidate_cache(bs, &local_err);
4968 aio_context_release(aio_context);
4969 if (local_err) {
4970 error_propagate(errp, local_err);
4971 return;
4976 void bdrv_clear_incoming_migration_all(void)
4978 BlockDriverState *bs;
4980 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4981 AioContext *aio_context = bdrv_get_aio_context(bs);
4983 aio_context_acquire(aio_context);
4984 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4985 aio_context_release(aio_context);
4989 int bdrv_flush(BlockDriverState *bs)
4991 Coroutine *co;
4992 RwCo rwco = {
4993 .bs = bs,
4994 .ret = NOT_DONE,
4997 if (qemu_in_coroutine()) {
4998 /* Fast-path if already in coroutine context */
4999 bdrv_flush_co_entry(&rwco);
5000 } else {
5001 AioContext *aio_context = bdrv_get_aio_context(bs);
5003 co = qemu_coroutine_create(bdrv_flush_co_entry);
5004 qemu_coroutine_enter(co, &rwco);
5005 while (rwco.ret == NOT_DONE) {
5006 aio_poll(aio_context, true);
5010 return rwco.ret;
5013 typedef struct DiscardCo {
5014 BlockDriverState *bs;
5015 int64_t sector_num;
5016 int nb_sectors;
5017 int ret;
5018 } DiscardCo;
5019 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5021 DiscardCo *rwco = opaque;
5023 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5026 /* if no limit is specified in the BlockLimits use a default
5027 * of 32768 512-byte sectors (16 MiB) per request.
5029 #define MAX_DISCARD_DEFAULT 32768
5031 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5032 int nb_sectors)
5034 int max_discard;
5036 if (!bs->drv) {
5037 return -ENOMEDIUM;
5038 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5039 return -EIO;
5040 } else if (bs->read_only) {
5041 return -EROFS;
5044 bdrv_reset_dirty(bs, sector_num, nb_sectors);
5046 /* Do nothing if disabled. */
5047 if (!(bs->open_flags & BDRV_O_UNMAP)) {
5048 return 0;
5051 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5052 return 0;
5055 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5056 while (nb_sectors > 0) {
5057 int ret;
5058 int num = nb_sectors;
5060 /* align request */
5061 if (bs->bl.discard_alignment &&
5062 num >= bs->bl.discard_alignment &&
5063 sector_num % bs->bl.discard_alignment) {
5064 if (num > bs->bl.discard_alignment) {
5065 num = bs->bl.discard_alignment;
5067 num -= sector_num % bs->bl.discard_alignment;
5070 /* limit request size */
5071 if (num > max_discard) {
5072 num = max_discard;
5075 if (bs->drv->bdrv_co_discard) {
5076 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5077 } else {
5078 BlockDriverAIOCB *acb;
5079 CoroutineIOCompletion co = {
5080 .coroutine = qemu_coroutine_self(),
5083 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5084 bdrv_co_io_em_complete, &co);
5085 if (acb == NULL) {
5086 return -EIO;
5087 } else {
5088 qemu_coroutine_yield();
5089 ret = co.ret;
5092 if (ret && ret != -ENOTSUP) {
5093 return ret;
5096 sector_num += num;
5097 nb_sectors -= num;
5099 return 0;
5102 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5104 Coroutine *co;
5105 DiscardCo rwco = {
5106 .bs = bs,
5107 .sector_num = sector_num,
5108 .nb_sectors = nb_sectors,
5109 .ret = NOT_DONE,
5112 if (qemu_in_coroutine()) {
5113 /* Fast-path if already in coroutine context */
5114 bdrv_discard_co_entry(&rwco);
5115 } else {
5116 AioContext *aio_context = bdrv_get_aio_context(bs);
5118 co = qemu_coroutine_create(bdrv_discard_co_entry);
5119 qemu_coroutine_enter(co, &rwco);
5120 while (rwco.ret == NOT_DONE) {
5121 aio_poll(aio_context, true);
5125 return rwco.ret;
5128 /**************************************************************/
5129 /* removable device support */
5132 * Return TRUE if the media is present
5134 int bdrv_is_inserted(BlockDriverState *bs)
5136 BlockDriver *drv = bs->drv;
5138 if (!drv)
5139 return 0;
5140 if (!drv->bdrv_is_inserted)
5141 return 1;
5142 return drv->bdrv_is_inserted(bs);
5146 * Return whether the media changed since the last call to this
5147 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5149 int bdrv_media_changed(BlockDriverState *bs)
5151 BlockDriver *drv = bs->drv;
5153 if (drv && drv->bdrv_media_changed) {
5154 return drv->bdrv_media_changed(bs);
5156 return -ENOTSUP;
5160 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5162 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5164 BlockDriver *drv = bs->drv;
5166 if (drv && drv->bdrv_eject) {
5167 drv->bdrv_eject(bs, eject_flag);
5170 if (bs->device_name[0] != '\0') {
5171 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5172 eject_flag, &error_abort);
5177 * Lock or unlock the media (if it is locked, the user won't be able
5178 * to eject it manually).
5180 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5182 BlockDriver *drv = bs->drv;
5184 trace_bdrv_lock_medium(bs, locked);
5186 if (drv && drv->bdrv_lock_medium) {
5187 drv->bdrv_lock_medium(bs, locked);
5191 /* needed for generic scsi interface */
5193 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5195 BlockDriver *drv = bs->drv;
5197 if (drv && drv->bdrv_ioctl)
5198 return drv->bdrv_ioctl(bs, req, buf);
5199 return -ENOTSUP;
5202 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5203 unsigned long int req, void *buf,
5204 BlockDriverCompletionFunc *cb, void *opaque)
5206 BlockDriver *drv = bs->drv;
5208 if (drv && drv->bdrv_aio_ioctl)
5209 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5210 return NULL;
5213 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5215 bs->guest_block_size = align;
5218 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5220 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5224 * Check if all memory in this vector is sector aligned.
5226 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5228 int i;
5229 size_t alignment = bdrv_opt_mem_align(bs);
5231 for (i = 0; i < qiov->niov; i++) {
5232 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5233 return false;
5235 if (qiov->iov[i].iov_len % alignment) {
5236 return false;
5240 return true;
5243 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5244 Error **errp)
5246 int64_t bitmap_size;
5247 BdrvDirtyBitmap *bitmap;
5249 assert((granularity & (granularity - 1)) == 0);
5251 granularity >>= BDRV_SECTOR_BITS;
5252 assert(granularity);
5253 bitmap_size = bdrv_getlength(bs);
5254 if (bitmap_size < 0) {
5255 error_setg_errno(errp, -bitmap_size, "could not get length of device");
5256 errno = -bitmap_size;
5257 return NULL;
5259 bitmap_size >>= BDRV_SECTOR_BITS;
5260 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5261 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5262 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5263 return bitmap;
5266 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5268 BdrvDirtyBitmap *bm, *next;
5269 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5270 if (bm == bitmap) {
5271 QLIST_REMOVE(bitmap, list);
5272 hbitmap_free(bitmap->bitmap);
5273 g_free(bitmap);
5274 return;
5279 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5281 BdrvDirtyBitmap *bm;
5282 BlockDirtyInfoList *list = NULL;
5283 BlockDirtyInfoList **plist = &list;
5285 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5286 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5287 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5288 info->count = bdrv_get_dirty_count(bs, bm);
5289 info->granularity =
5290 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5291 entry->value = info;
5292 *plist = entry;
5293 plist = &entry->next;
5296 return list;
5299 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5301 if (bitmap) {
5302 return hbitmap_get(bitmap->bitmap, sector);
5303 } else {
5304 return 0;
5308 void bdrv_dirty_iter_init(BlockDriverState *bs,
5309 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5311 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5314 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5315 int nr_sectors)
5317 BdrvDirtyBitmap *bitmap;
5318 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5319 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5323 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5325 BdrvDirtyBitmap *bitmap;
5326 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5327 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5331 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5333 return hbitmap_count(bitmap->bitmap);
5336 /* Get a reference to bs */
5337 void bdrv_ref(BlockDriverState *bs)
5339 bs->refcnt++;
5342 /* Release a previously grabbed reference to bs.
5343 * If after releasing, reference count is zero, the BlockDriverState is
5344 * deleted. */
5345 void bdrv_unref(BlockDriverState *bs)
5347 assert(bs->refcnt > 0);
5348 if (--bs->refcnt == 0) {
5349 bdrv_delete(bs);
5353 struct BdrvOpBlocker {
5354 Error *reason;
5355 QLIST_ENTRY(BdrvOpBlocker) list;
5358 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5360 BdrvOpBlocker *blocker;
5361 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5362 if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5363 blocker = QLIST_FIRST(&bs->op_blockers[op]);
5364 if (errp) {
5365 error_setg(errp, "Device '%s' is busy: %s",
5366 bs->device_name, error_get_pretty(blocker->reason));
5368 return true;
5370 return false;
5373 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5375 BdrvOpBlocker *blocker;
5376 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5378 blocker = g_malloc0(sizeof(BdrvOpBlocker));
5379 blocker->reason = reason;
5380 QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5383 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5385 BdrvOpBlocker *blocker, *next;
5386 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5387 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5388 if (blocker->reason == reason) {
5389 QLIST_REMOVE(blocker, list);
5390 g_free(blocker);
5395 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5397 int i;
5398 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5399 bdrv_op_block(bs, i, reason);
5403 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5405 int i;
5406 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5407 bdrv_op_unblock(bs, i, reason);
5411 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5413 int i;
5415 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5416 if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5417 return false;
5420 return true;
5423 void bdrv_iostatus_enable(BlockDriverState *bs)
5425 bs->iostatus_enabled = true;
5426 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5429 /* The I/O status is only enabled if the drive explicitly
5430 * enables it _and_ the VM is configured to stop on errors */
5431 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5433 return (bs->iostatus_enabled &&
5434 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5435 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5436 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5439 void bdrv_iostatus_disable(BlockDriverState *bs)
5441 bs->iostatus_enabled = false;
5444 void bdrv_iostatus_reset(BlockDriverState *bs)
5446 if (bdrv_iostatus_is_enabled(bs)) {
5447 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5448 if (bs->job) {
5449 block_job_iostatus_reset(bs->job);
5454 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5456 assert(bdrv_iostatus_is_enabled(bs));
5457 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5458 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5459 BLOCK_DEVICE_IO_STATUS_FAILED;
5463 void
5464 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5465 enum BlockAcctType type)
5467 assert(type < BDRV_MAX_IOTYPE);
5469 cookie->bytes = bytes;
5470 cookie->start_time_ns = get_clock();
5471 cookie->type = type;
5474 void
5475 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5477 assert(cookie->type < BDRV_MAX_IOTYPE);
5479 bs->nr_bytes[cookie->type] += cookie->bytes;
5480 bs->nr_ops[cookie->type]++;
5481 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5484 void bdrv_img_create(const char *filename, const char *fmt,
5485 const char *base_filename, const char *base_fmt,
5486 char *options, uint64_t img_size, int flags,
5487 Error **errp, bool quiet)
5489 QemuOptsList *create_opts = NULL;
5490 QemuOpts *opts = NULL;
5491 const char *backing_fmt, *backing_file;
5492 int64_t size;
5493 BlockDriver *drv, *proto_drv;
5494 BlockDriver *backing_drv = NULL;
5495 Error *local_err = NULL;
5496 int ret = 0;
5498 /* Find driver and parse its options */
5499 drv = bdrv_find_format(fmt);
5500 if (!drv) {
5501 error_setg(errp, "Unknown file format '%s'", fmt);
5502 return;
5505 proto_drv = bdrv_find_protocol(filename, true);
5506 if (!proto_drv) {
5507 error_setg(errp, "Unknown protocol '%s'", filename);
5508 return;
5511 create_opts = qemu_opts_append(create_opts, drv->create_opts);
5512 create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5514 /* Create parameter list with default values */
5515 opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5516 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5518 /* Parse -o options */
5519 if (options) {
5520 if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5521 error_setg(errp, "Invalid options for file format '%s'", fmt);
5522 goto out;
5526 if (base_filename) {
5527 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5528 error_setg(errp, "Backing file not supported for file format '%s'",
5529 fmt);
5530 goto out;
5534 if (base_fmt) {
5535 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5536 error_setg(errp, "Backing file format not supported for file "
5537 "format '%s'", fmt);
5538 goto out;
5542 backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5543 if (backing_file) {
5544 if (!strcmp(filename, backing_file)) {
5545 error_setg(errp, "Error: Trying to create an image with the "
5546 "same filename as the backing file");
5547 goto out;
5551 backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5552 if (backing_fmt) {
5553 backing_drv = bdrv_find_format(backing_fmt);
5554 if (!backing_drv) {
5555 error_setg(errp, "Unknown backing file format '%s'",
5556 backing_fmt);
5557 goto out;
5561 // The size for the image must always be specified, with one exception:
5562 // If we are using a backing file, we can obtain the size from there
5563 size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5564 if (size == -1) {
5565 if (backing_file) {
5566 BlockDriverState *bs;
5567 uint64_t size;
5568 int back_flags;
5570 /* backing files always opened read-only */
5571 back_flags =
5572 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5574 bs = NULL;
5575 ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5576 backing_drv, &local_err);
5577 if (ret < 0) {
5578 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5579 backing_file,
5580 error_get_pretty(local_err));
5581 error_free(local_err);
5582 local_err = NULL;
5583 goto out;
5585 bdrv_get_geometry(bs, &size);
5586 size *= 512;
5588 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5590 bdrv_unref(bs);
5591 } else {
5592 error_setg(errp, "Image creation needs a size parameter");
5593 goto out;
5597 if (!quiet) {
5598 printf("Formatting '%s', fmt=%s ", filename, fmt);
5599 qemu_opts_print(opts);
5600 puts("");
5603 ret = bdrv_create(drv, filename, opts, &local_err);
5605 if (ret == -EFBIG) {
5606 /* This is generally a better message than whatever the driver would
5607 * deliver (especially because of the cluster_size_hint), since that
5608 * is most probably not much different from "image too large". */
5609 const char *cluster_size_hint = "";
5610 if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5611 cluster_size_hint = " (try using a larger cluster size)";
5613 error_setg(errp, "The image size is too large for file format '%s'"
5614 "%s", fmt, cluster_size_hint);
5615 error_free(local_err);
5616 local_err = NULL;
5619 out:
5620 qemu_opts_del(opts);
5621 qemu_opts_free(create_opts);
5622 if (local_err) {
5623 error_propagate(errp, local_err);
5627 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5629 return bs->aio_context;
5632 void bdrv_detach_aio_context(BlockDriverState *bs)
5634 if (!bs->drv) {
5635 return;
5638 if (bs->io_limits_enabled) {
5639 throttle_detach_aio_context(&bs->throttle_state);
5641 if (bs->drv->bdrv_detach_aio_context) {
5642 bs->drv->bdrv_detach_aio_context(bs);
5644 if (bs->file) {
5645 bdrv_detach_aio_context(bs->file);
5647 if (bs->backing_hd) {
5648 bdrv_detach_aio_context(bs->backing_hd);
5651 bs->aio_context = NULL;
5654 void bdrv_attach_aio_context(BlockDriverState *bs,
5655 AioContext *new_context)
5657 if (!bs->drv) {
5658 return;
5661 bs->aio_context = new_context;
5663 if (bs->backing_hd) {
5664 bdrv_attach_aio_context(bs->backing_hd, new_context);
5666 if (bs->file) {
5667 bdrv_attach_aio_context(bs->file, new_context);
5669 if (bs->drv->bdrv_attach_aio_context) {
5670 bs->drv->bdrv_attach_aio_context(bs, new_context);
5672 if (bs->io_limits_enabled) {
5673 throttle_attach_aio_context(&bs->throttle_state, new_context);
5677 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5679 bdrv_drain_all(); /* ensure there are no in-flight requests */
5681 bdrv_detach_aio_context(bs);
5683 /* This function executes in the old AioContext so acquire the new one in
5684 * case it runs in a different thread.
5686 aio_context_acquire(new_context);
5687 bdrv_attach_aio_context(bs, new_context);
5688 aio_context_release(new_context);
5691 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5692 NotifierWithReturn *notifier)
5694 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5697 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5699 if (!bs->drv->bdrv_amend_options) {
5700 return -ENOTSUP;
5702 return bs->drv->bdrv_amend_options(bs, opts);
5705 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5706 * of block filter and by bdrv_is_first_non_filter.
5707 * It is used to test if the given bs is the candidate or recurse more in the
5708 * node graph.
5710 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5711 BlockDriverState *candidate)
5713 /* return false if basic checks fails */
5714 if (!bs || !bs->drv) {
5715 return false;
5718 /* the code reached a non block filter driver -> check if the bs is
5719 * the same as the candidate. It's the recursion termination condition.
5721 if (!bs->drv->is_filter) {
5722 return bs == candidate;
5724 /* Down this path the driver is a block filter driver */
5726 /* If the block filter recursion method is defined use it to recurse down
5727 * the node graph.
5729 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5730 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5733 /* the driver is a block filter but don't allow to recurse -> return false
5735 return false;
5738 /* This function checks if the candidate is the first non filter bs down it's
5739 * bs chain. Since we don't have pointers to parents it explore all bs chains
5740 * from the top. Some filters can choose not to pass down the recursion.
5742 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5744 BlockDriverState *bs;
5746 /* walk down the bs forest recursively */
5747 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5748 bool perm;
5750 /* try to recurse in this top level bs */
5751 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5753 /* candidate is the first non filter */
5754 if (perm) {
5755 return true;
5759 return false;
5762 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5764 BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5765 if (!to_replace_bs) {
5766 error_setg(errp, "Node name '%s' not found", node_name);
5767 return NULL;
5770 if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5771 return NULL;
5774 /* We don't want arbitrary node of the BDS chain to be replaced only the top
5775 * most non filter in order to prevent data corruption.
5776 * Another benefit is that this tests exclude backing files which are
5777 * blocked by the backing blockers.
5779 if (!bdrv_is_first_non_filter(to_replace_bs)) {
5780 error_setg(errp, "Only top most non filter can be replaced");
5781 return NULL;
5784 return to_replace_bs;
5787 void bdrv_io_plug(BlockDriverState *bs)
5789 BlockDriver *drv = bs->drv;
5790 if (drv && drv->bdrv_io_plug) {
5791 drv->bdrv_io_plug(bs);
5792 } else if (bs->file) {
5793 bdrv_io_plug(bs->file);
5797 void bdrv_io_unplug(BlockDriverState *bs)
5799 BlockDriver *drv = bs->drv;
5800 if (drv && drv->bdrv_io_unplug) {
5801 drv->bdrv_io_unplug(bs);
5802 } else if (bs->file) {
5803 bdrv_io_unplug(bs->file);
5807 void bdrv_flush_io_queue(BlockDriverState *bs)
5809 BlockDriver *drv = bs->drv;
5810 if (drv && drv->bdrv_flush_io_queue) {
5811 drv->bdrv_flush_io_queue(bs);
5812 } else if (bs->file) {
5813 bdrv_flush_io_queue(bs->file);