qapi-commands: Inline single-use helpers of gen_marshal()
[qemu/cris-port.git] / hw / ssi / xilinx_spips.c
blobe2b77dc3defefe8c102b07fa7441f765d1b8b5f5
1 /*
2 * QEMU model of the Xilinx Zynq SPI controller
4 * Copyright (c) 2012 Peter A. G. Crosthwaite
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "qemu/osdep.h"
26 #include "hw/sysbus.h"
27 #include "sysemu/sysemu.h"
28 #include "hw/ptimer.h"
29 #include "qemu/log.h"
30 #include "qemu/fifo8.h"
31 #include "hw/ssi/ssi.h"
32 #include "qemu/bitops.h"
33 #include "hw/ssi/xilinx_spips.h"
35 #ifndef XILINX_SPIPS_ERR_DEBUG
36 #define XILINX_SPIPS_ERR_DEBUG 0
37 #endif
39 #define DB_PRINT_L(level, ...) do { \
40 if (XILINX_SPIPS_ERR_DEBUG > (level)) { \
41 fprintf(stderr, ": %s: ", __func__); \
42 fprintf(stderr, ## __VA_ARGS__); \
43 } \
44 } while (0);
46 /* config register */
47 #define R_CONFIG (0x00 / 4)
48 #define IFMODE (1U << 31)
49 #define ENDIAN (1 << 26)
50 #define MODEFAIL_GEN_EN (1 << 17)
51 #define MAN_START_COM (1 << 16)
52 #define MAN_START_EN (1 << 15)
53 #define MANUAL_CS (1 << 14)
54 #define CS (0xF << 10)
55 #define CS_SHIFT (10)
56 #define PERI_SEL (1 << 9)
57 #define REF_CLK (1 << 8)
58 #define FIFO_WIDTH (3 << 6)
59 #define BAUD_RATE_DIV (7 << 3)
60 #define CLK_PH (1 << 2)
61 #define CLK_POL (1 << 1)
62 #define MODE_SEL (1 << 0)
63 #define R_CONFIG_RSVD (0x7bf40000)
65 /* interrupt mechanism */
66 #define R_INTR_STATUS (0x04 / 4)
67 #define R_INTR_EN (0x08 / 4)
68 #define R_INTR_DIS (0x0C / 4)
69 #define R_INTR_MASK (0x10 / 4)
70 #define IXR_TX_FIFO_UNDERFLOW (1 << 6)
71 #define IXR_RX_FIFO_FULL (1 << 5)
72 #define IXR_RX_FIFO_NOT_EMPTY (1 << 4)
73 #define IXR_TX_FIFO_FULL (1 << 3)
74 #define IXR_TX_FIFO_NOT_FULL (1 << 2)
75 #define IXR_TX_FIFO_MODE_FAIL (1 << 1)
76 #define IXR_RX_FIFO_OVERFLOW (1 << 0)
77 #define IXR_ALL ((IXR_TX_FIFO_UNDERFLOW<<1)-1)
79 #define R_EN (0x14 / 4)
80 #define R_DELAY (0x18 / 4)
81 #define R_TX_DATA (0x1C / 4)
82 #define R_RX_DATA (0x20 / 4)
83 #define R_SLAVE_IDLE_COUNT (0x24 / 4)
84 #define R_TX_THRES (0x28 / 4)
85 #define R_RX_THRES (0x2C / 4)
86 #define R_TXD1 (0x80 / 4)
87 #define R_TXD2 (0x84 / 4)
88 #define R_TXD3 (0x88 / 4)
90 #define R_LQSPI_CFG (0xa0 / 4)
91 #define R_LQSPI_CFG_RESET 0x03A002EB
92 #define LQSPI_CFG_LQ_MODE (1U << 31)
93 #define LQSPI_CFG_TWO_MEM (1 << 30)
94 #define LQSPI_CFG_SEP_BUS (1 << 30)
95 #define LQSPI_CFG_U_PAGE (1 << 28)
96 #define LQSPI_CFG_MODE_EN (1 << 25)
97 #define LQSPI_CFG_MODE_WIDTH 8
98 #define LQSPI_CFG_MODE_SHIFT 16
99 #define LQSPI_CFG_DUMMY_WIDTH 3
100 #define LQSPI_CFG_DUMMY_SHIFT 8
101 #define LQSPI_CFG_INST_CODE 0xFF
103 #define R_LQSPI_STS (0xA4 / 4)
104 #define LQSPI_STS_WR_RECVD (1 << 1)
106 #define R_MOD_ID (0xFC / 4)
108 /* size of TXRX FIFOs */
109 #define RXFF_A 32
110 #define TXFF_A 32
112 #define RXFF_A_Q (64 * 4)
113 #define TXFF_A_Q (64 * 4)
115 /* 16MB per linear region */
116 #define LQSPI_ADDRESS_BITS 24
117 /* Bite off 4k chunks at a time */
118 #define LQSPI_CACHE_SIZE 1024
120 #define SNOOP_CHECKING 0xFF
121 #define SNOOP_NONE 0xFE
122 #define SNOOP_STRIPING 0
124 typedef enum {
125 READ = 0x3,
126 FAST_READ = 0xb,
127 DOR = 0x3b,
128 QOR = 0x6b,
129 DIOR = 0xbb,
130 QIOR = 0xeb,
132 PP = 0x2,
133 DPP = 0xa2,
134 QPP = 0x32,
135 } FlashCMD;
137 typedef struct {
138 XilinxSPIPS parent_obj;
140 uint8_t lqspi_buf[LQSPI_CACHE_SIZE];
141 hwaddr lqspi_cached_addr;
142 } XilinxQSPIPS;
144 typedef struct XilinxSPIPSClass {
145 SysBusDeviceClass parent_class;
147 const MemoryRegionOps *reg_ops;
149 uint32_t rx_fifo_size;
150 uint32_t tx_fifo_size;
151 } XilinxSPIPSClass;
153 static inline int num_effective_busses(XilinxSPIPS *s)
155 return (s->regs[R_LQSPI_CFG] & LQSPI_CFG_SEP_BUS &&
156 s->regs[R_LQSPI_CFG] & LQSPI_CFG_TWO_MEM) ? s->num_busses : 1;
159 static inline bool xilinx_spips_cs_is_set(XilinxSPIPS *s, int i, int field)
161 return ~field & (1 << i) && (s->regs[R_CONFIG] & MANUAL_CS
162 || !fifo8_is_empty(&s->tx_fifo));
165 static void xilinx_spips_update_cs_lines(XilinxSPIPS *s)
167 int i, j;
168 bool found = false;
169 int field = s->regs[R_CONFIG] >> CS_SHIFT;
171 for (i = 0; i < s->num_cs; i++) {
172 for (j = 0; j < num_effective_busses(s); j++) {
173 int upage = !!(s->regs[R_LQSPI_STS] & LQSPI_CFG_U_PAGE);
174 int cs_to_set = (j * s->num_cs + i + upage) %
175 (s->num_cs * s->num_busses);
177 if (xilinx_spips_cs_is_set(s, i, field) && !found) {
178 DB_PRINT_L(0, "selecting slave %d\n", i);
179 qemu_set_irq(s->cs_lines[cs_to_set], 0);
180 } else {
181 DB_PRINT_L(0, "deselecting slave %d\n", i);
182 qemu_set_irq(s->cs_lines[cs_to_set], 1);
185 if (xilinx_spips_cs_is_set(s, i, field)) {
186 found = true;
189 if (!found) {
190 s->snoop_state = SNOOP_CHECKING;
191 DB_PRINT_L(1, "moving to snoop check state\n");
195 static void xilinx_spips_update_ixr(XilinxSPIPS *s)
197 if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_LQ_MODE) {
198 return;
200 /* These are set/cleared as they occur */
201 s->regs[R_INTR_STATUS] &= (IXR_TX_FIFO_UNDERFLOW | IXR_RX_FIFO_OVERFLOW |
202 IXR_TX_FIFO_MODE_FAIL);
203 /* these are pure functions of fifo state, set them here */
204 s->regs[R_INTR_STATUS] |=
205 (fifo8_is_full(&s->rx_fifo) ? IXR_RX_FIFO_FULL : 0) |
206 (s->rx_fifo.num >= s->regs[R_RX_THRES] ? IXR_RX_FIFO_NOT_EMPTY : 0) |
207 (fifo8_is_full(&s->tx_fifo) ? IXR_TX_FIFO_FULL : 0) |
208 (s->tx_fifo.num < s->regs[R_TX_THRES] ? IXR_TX_FIFO_NOT_FULL : 0);
209 /* drive external interrupt pin */
210 int new_irqline = !!(s->regs[R_INTR_MASK] & s->regs[R_INTR_STATUS] &
211 IXR_ALL);
212 if (new_irqline != s->irqline) {
213 s->irqline = new_irqline;
214 qemu_set_irq(s->irq, s->irqline);
218 static void xilinx_spips_reset(DeviceState *d)
220 XilinxSPIPS *s = XILINX_SPIPS(d);
222 int i;
223 for (i = 0; i < XLNX_SPIPS_R_MAX; i++) {
224 s->regs[i] = 0;
227 fifo8_reset(&s->rx_fifo);
228 fifo8_reset(&s->rx_fifo);
229 /* non zero resets */
230 s->regs[R_CONFIG] |= MODEFAIL_GEN_EN;
231 s->regs[R_SLAVE_IDLE_COUNT] = 0xFF;
232 s->regs[R_TX_THRES] = 1;
233 s->regs[R_RX_THRES] = 1;
234 /* FIXME: move magic number definition somewhere sensible */
235 s->regs[R_MOD_ID] = 0x01090106;
236 s->regs[R_LQSPI_CFG] = R_LQSPI_CFG_RESET;
237 s->snoop_state = SNOOP_CHECKING;
238 xilinx_spips_update_ixr(s);
239 xilinx_spips_update_cs_lines(s);
242 /* N way (num) in place bit striper. Lay out row wise bits (LSB to MSB)
243 * column wise (from element 0 to N-1). num is the length of x, and dir
244 * reverses the direction of the transform. Best illustrated by example:
245 * Each digit in the below array is a single bit (num == 3):
247 * {{ 76543210, } ----- stripe (dir == false) -----> {{ FCheb630, }
248 * { hgfedcba, } { GDAfc741, }
249 * { HGFEDCBA, }} <---- upstripe (dir == true) ----- { HEBgda52, }}
252 static inline void stripe8(uint8_t *x, int num, bool dir)
254 uint8_t r[num];
255 memset(r, 0, sizeof(uint8_t) * num);
256 int idx[2] = {0, 0};
257 int bit[2] = {0, 0};
258 int d = dir;
260 for (idx[0] = 0; idx[0] < num; ++idx[0]) {
261 for (bit[0] = 0; bit[0] < 8; ++bit[0]) {
262 r[idx[d]] |= x[idx[!d]] & 1 << bit[!d] ? 1 << bit[d] : 0;
263 idx[1] = (idx[1] + 1) % num;
264 if (!idx[1]) {
265 bit[1]++;
269 memcpy(x, r, sizeof(uint8_t) * num);
272 static void xilinx_spips_flush_txfifo(XilinxSPIPS *s)
274 int debug_level = 0;
276 for (;;) {
277 int i;
278 uint8_t tx = 0;
279 uint8_t tx_rx[num_effective_busses(s)];
281 if (fifo8_is_empty(&s->tx_fifo)) {
282 if (!(s->regs[R_LQSPI_CFG] & LQSPI_CFG_LQ_MODE)) {
283 s->regs[R_INTR_STATUS] |= IXR_TX_FIFO_UNDERFLOW;
285 xilinx_spips_update_ixr(s);
286 return;
287 } else if (s->snoop_state == SNOOP_STRIPING) {
288 for (i = 0; i < num_effective_busses(s); ++i) {
289 tx_rx[i] = fifo8_pop(&s->tx_fifo);
291 stripe8(tx_rx, num_effective_busses(s), false);
292 } else {
293 tx = fifo8_pop(&s->tx_fifo);
294 for (i = 0; i < num_effective_busses(s); ++i) {
295 tx_rx[i] = tx;
299 for (i = 0; i < num_effective_busses(s); ++i) {
300 DB_PRINT_L(debug_level, "tx = %02x\n", tx_rx[i]);
301 tx_rx[i] = ssi_transfer(s->spi[i], (uint32_t)tx_rx[i]);
302 DB_PRINT_L(debug_level, "rx = %02x\n", tx_rx[i]);
305 if (fifo8_is_full(&s->rx_fifo)) {
306 s->regs[R_INTR_STATUS] |= IXR_RX_FIFO_OVERFLOW;
307 DB_PRINT_L(0, "rx FIFO overflow");
308 } else if (s->snoop_state == SNOOP_STRIPING) {
309 stripe8(tx_rx, num_effective_busses(s), true);
310 for (i = 0; i < num_effective_busses(s); ++i) {
311 fifo8_push(&s->rx_fifo, (uint8_t)tx_rx[i]);
313 } else {
314 fifo8_push(&s->rx_fifo, (uint8_t)tx_rx[0]);
317 DB_PRINT_L(debug_level, "initial snoop state: %x\n",
318 (unsigned)s->snoop_state);
319 switch (s->snoop_state) {
320 case (SNOOP_CHECKING):
321 switch (tx) { /* new instruction code */
322 case READ: /* 3 address bytes, no dummy bytes/cycles */
323 case PP:
324 case DPP:
325 case QPP:
326 s->snoop_state = 3;
327 break;
328 case FAST_READ: /* 3 address bytes, 1 dummy byte */
329 case DOR:
330 case QOR:
331 case DIOR: /* FIXME: these vary between vendor - set to spansion */
332 s->snoop_state = 4;
333 break;
334 case QIOR: /* 3 address bytes, 2 dummy bytes */
335 s->snoop_state = 6;
336 break;
337 default:
338 s->snoop_state = SNOOP_NONE;
340 break;
341 case (SNOOP_STRIPING):
342 case (SNOOP_NONE):
343 /* Once we hit the boring stuff - squelch debug noise */
344 if (!debug_level) {
345 DB_PRINT_L(0, "squelching debug info ....\n");
346 debug_level = 1;
348 break;
349 default:
350 s->snoop_state--;
352 DB_PRINT_L(debug_level, "final snoop state: %x\n",
353 (unsigned)s->snoop_state);
357 static inline void rx_data_bytes(XilinxSPIPS *s, uint8_t *value, int max)
359 int i;
361 for (i = 0; i < max && !fifo8_is_empty(&s->rx_fifo); ++i) {
362 value[i] = fifo8_pop(&s->rx_fifo);
366 static uint64_t xilinx_spips_read(void *opaque, hwaddr addr,
367 unsigned size)
369 XilinxSPIPS *s = opaque;
370 uint32_t mask = ~0;
371 uint32_t ret;
372 uint8_t rx_buf[4];
374 addr >>= 2;
375 switch (addr) {
376 case R_CONFIG:
377 mask = ~(R_CONFIG_RSVD | MAN_START_COM);
378 break;
379 case R_INTR_STATUS:
380 ret = s->regs[addr] & IXR_ALL;
381 s->regs[addr] = 0;
382 DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4, ret);
383 return ret;
384 case R_INTR_MASK:
385 mask = IXR_ALL;
386 break;
387 case R_EN:
388 mask = 0x1;
389 break;
390 case R_SLAVE_IDLE_COUNT:
391 mask = 0xFF;
392 break;
393 case R_MOD_ID:
394 mask = 0x01FFFFFF;
395 break;
396 case R_INTR_EN:
397 case R_INTR_DIS:
398 case R_TX_DATA:
399 mask = 0;
400 break;
401 case R_RX_DATA:
402 memset(rx_buf, 0, sizeof(rx_buf));
403 rx_data_bytes(s, rx_buf, s->num_txrx_bytes);
404 ret = s->regs[R_CONFIG] & ENDIAN ? cpu_to_be32(*(uint32_t *)rx_buf)
405 : cpu_to_le32(*(uint32_t *)rx_buf);
406 DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4, ret);
407 xilinx_spips_update_ixr(s);
408 return ret;
410 DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4,
411 s->regs[addr] & mask);
412 return s->regs[addr] & mask;
416 static inline void tx_data_bytes(XilinxSPIPS *s, uint32_t value, int num)
418 int i;
419 for (i = 0; i < num && !fifo8_is_full(&s->tx_fifo); ++i) {
420 if (s->regs[R_CONFIG] & ENDIAN) {
421 fifo8_push(&s->tx_fifo, (uint8_t)(value >> 24));
422 value <<= 8;
423 } else {
424 fifo8_push(&s->tx_fifo, (uint8_t)value);
425 value >>= 8;
430 static void xilinx_spips_write(void *opaque, hwaddr addr,
431 uint64_t value, unsigned size)
433 int mask = ~0;
434 int man_start_com = 0;
435 XilinxSPIPS *s = opaque;
437 DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr, (unsigned)value);
438 addr >>= 2;
439 switch (addr) {
440 case R_CONFIG:
441 mask = ~(R_CONFIG_RSVD | MAN_START_COM);
442 if (value & MAN_START_COM) {
443 man_start_com = 1;
445 break;
446 case R_INTR_STATUS:
447 mask = IXR_ALL;
448 s->regs[R_INTR_STATUS] &= ~(mask & value);
449 goto no_reg_update;
450 case R_INTR_DIS:
451 mask = IXR_ALL;
452 s->regs[R_INTR_MASK] &= ~(mask & value);
453 goto no_reg_update;
454 case R_INTR_EN:
455 mask = IXR_ALL;
456 s->regs[R_INTR_MASK] |= mask & value;
457 goto no_reg_update;
458 case R_EN:
459 mask = 0x1;
460 break;
461 case R_SLAVE_IDLE_COUNT:
462 mask = 0xFF;
463 break;
464 case R_RX_DATA:
465 case R_INTR_MASK:
466 case R_MOD_ID:
467 mask = 0;
468 break;
469 case R_TX_DATA:
470 tx_data_bytes(s, (uint32_t)value, s->num_txrx_bytes);
471 goto no_reg_update;
472 case R_TXD1:
473 tx_data_bytes(s, (uint32_t)value, 1);
474 goto no_reg_update;
475 case R_TXD2:
476 tx_data_bytes(s, (uint32_t)value, 2);
477 goto no_reg_update;
478 case R_TXD3:
479 tx_data_bytes(s, (uint32_t)value, 3);
480 goto no_reg_update;
482 s->regs[addr] = (s->regs[addr] & ~mask) | (value & mask);
483 no_reg_update:
484 xilinx_spips_update_cs_lines(s);
485 if ((man_start_com && s->regs[R_CONFIG] & MAN_START_EN) ||
486 (fifo8_is_empty(&s->tx_fifo) && s->regs[R_CONFIG] & MAN_START_EN)) {
487 xilinx_spips_flush_txfifo(s);
489 xilinx_spips_update_cs_lines(s);
490 xilinx_spips_update_ixr(s);
493 static const MemoryRegionOps spips_ops = {
494 .read = xilinx_spips_read,
495 .write = xilinx_spips_write,
496 .endianness = DEVICE_LITTLE_ENDIAN,
499 static void xilinx_qspips_write(void *opaque, hwaddr addr,
500 uint64_t value, unsigned size)
502 XilinxQSPIPS *q = XILINX_QSPIPS(opaque);
504 xilinx_spips_write(opaque, addr, value, size);
505 addr >>= 2;
507 if (addr == R_LQSPI_CFG) {
508 q->lqspi_cached_addr = ~0ULL;
512 static const MemoryRegionOps qspips_ops = {
513 .read = xilinx_spips_read,
514 .write = xilinx_qspips_write,
515 .endianness = DEVICE_LITTLE_ENDIAN,
518 #define LQSPI_CACHE_SIZE 1024
520 static uint64_t
521 lqspi_read(void *opaque, hwaddr addr, unsigned int size)
523 int i;
524 XilinxQSPIPS *q = opaque;
525 XilinxSPIPS *s = opaque;
526 uint32_t ret;
528 if (addr >= q->lqspi_cached_addr &&
529 addr <= q->lqspi_cached_addr + LQSPI_CACHE_SIZE - 4) {
530 uint8_t *retp = &q->lqspi_buf[addr - q->lqspi_cached_addr];
531 ret = cpu_to_le32(*(uint32_t *)retp);
532 DB_PRINT_L(1, "addr: %08x, data: %08x\n", (unsigned)addr,
533 (unsigned)ret);
534 return ret;
535 } else {
536 int flash_addr = (addr / num_effective_busses(s));
537 int slave = flash_addr >> LQSPI_ADDRESS_BITS;
538 int cache_entry = 0;
539 uint32_t u_page_save = s->regs[R_LQSPI_STS] & ~LQSPI_CFG_U_PAGE;
541 s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE;
542 s->regs[R_LQSPI_STS] |= slave ? LQSPI_CFG_U_PAGE : 0;
544 DB_PRINT_L(0, "config reg status: %08x\n", s->regs[R_LQSPI_CFG]);
546 fifo8_reset(&s->tx_fifo);
547 fifo8_reset(&s->rx_fifo);
549 /* instruction */
550 DB_PRINT_L(0, "pushing read instruction: %02x\n",
551 (unsigned)(uint8_t)(s->regs[R_LQSPI_CFG] &
552 LQSPI_CFG_INST_CODE));
553 fifo8_push(&s->tx_fifo, s->regs[R_LQSPI_CFG] & LQSPI_CFG_INST_CODE);
554 /* read address */
555 DB_PRINT_L(0, "pushing read address %06x\n", flash_addr);
556 fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 16));
557 fifo8_push(&s->tx_fifo, (uint8_t)(flash_addr >> 8));
558 fifo8_push(&s->tx_fifo, (uint8_t)flash_addr);
559 /* mode bits */
560 if (s->regs[R_LQSPI_CFG] & LQSPI_CFG_MODE_EN) {
561 fifo8_push(&s->tx_fifo, extract32(s->regs[R_LQSPI_CFG],
562 LQSPI_CFG_MODE_SHIFT,
563 LQSPI_CFG_MODE_WIDTH));
565 /* dummy bytes */
566 for (i = 0; i < (extract32(s->regs[R_LQSPI_CFG], LQSPI_CFG_DUMMY_SHIFT,
567 LQSPI_CFG_DUMMY_WIDTH)); ++i) {
568 DB_PRINT_L(0, "pushing dummy byte\n");
569 fifo8_push(&s->tx_fifo, 0);
571 xilinx_spips_update_cs_lines(s);
572 xilinx_spips_flush_txfifo(s);
573 fifo8_reset(&s->rx_fifo);
575 DB_PRINT_L(0, "starting QSPI data read\n");
577 while (cache_entry < LQSPI_CACHE_SIZE) {
578 for (i = 0; i < 64; ++i) {
579 tx_data_bytes(s, 0, 1);
581 xilinx_spips_flush_txfifo(s);
582 for (i = 0; i < 64; ++i) {
583 rx_data_bytes(s, &q->lqspi_buf[cache_entry++], 1);
587 s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE;
588 s->regs[R_LQSPI_STS] |= u_page_save;
589 xilinx_spips_update_cs_lines(s);
591 q->lqspi_cached_addr = flash_addr * num_effective_busses(s);
592 return lqspi_read(opaque, addr, size);
596 static const MemoryRegionOps lqspi_ops = {
597 .read = lqspi_read,
598 .endianness = DEVICE_NATIVE_ENDIAN,
599 .valid = {
600 .min_access_size = 1,
601 .max_access_size = 4
605 static void xilinx_spips_realize(DeviceState *dev, Error **errp)
607 XilinxSPIPS *s = XILINX_SPIPS(dev);
608 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
609 XilinxSPIPSClass *xsc = XILINX_SPIPS_GET_CLASS(s);
610 int i;
612 DB_PRINT_L(0, "realized spips\n");
614 s->spi = g_new(SSIBus *, s->num_busses);
615 for (i = 0; i < s->num_busses; ++i) {
616 char bus_name[16];
617 snprintf(bus_name, 16, "spi%d", i);
618 s->spi[i] = ssi_create_bus(dev, bus_name);
621 s->cs_lines = g_new0(qemu_irq, s->num_cs * s->num_busses);
622 ssi_auto_connect_slaves(DEVICE(s), s->cs_lines, s->spi[0]);
623 ssi_auto_connect_slaves(DEVICE(s), s->cs_lines, s->spi[1]);
624 sysbus_init_irq(sbd, &s->irq);
625 for (i = 0; i < s->num_cs * s->num_busses; ++i) {
626 sysbus_init_irq(sbd, &s->cs_lines[i]);
629 memory_region_init_io(&s->iomem, OBJECT(s), xsc->reg_ops, s,
630 "spi", XLNX_SPIPS_R_MAX * 4);
631 sysbus_init_mmio(sbd, &s->iomem);
633 s->irqline = -1;
635 fifo8_create(&s->rx_fifo, xsc->rx_fifo_size);
636 fifo8_create(&s->tx_fifo, xsc->tx_fifo_size);
639 static void xilinx_qspips_realize(DeviceState *dev, Error **errp)
641 XilinxSPIPS *s = XILINX_SPIPS(dev);
642 XilinxQSPIPS *q = XILINX_QSPIPS(dev);
643 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
645 DB_PRINT_L(0, "realized qspips\n");
647 s->num_busses = 2;
648 s->num_cs = 2;
649 s->num_txrx_bytes = 4;
651 xilinx_spips_realize(dev, errp);
652 memory_region_init_io(&s->mmlqspi, OBJECT(s), &lqspi_ops, s, "lqspi",
653 (1 << LQSPI_ADDRESS_BITS) * 2);
654 sysbus_init_mmio(sbd, &s->mmlqspi);
656 q->lqspi_cached_addr = ~0ULL;
659 static int xilinx_spips_post_load(void *opaque, int version_id)
661 xilinx_spips_update_ixr((XilinxSPIPS *)opaque);
662 xilinx_spips_update_cs_lines((XilinxSPIPS *)opaque);
663 return 0;
666 static const VMStateDescription vmstate_xilinx_spips = {
667 .name = "xilinx_spips",
668 .version_id = 2,
669 .minimum_version_id = 2,
670 .post_load = xilinx_spips_post_load,
671 .fields = (VMStateField[]) {
672 VMSTATE_FIFO8(tx_fifo, XilinxSPIPS),
673 VMSTATE_FIFO8(rx_fifo, XilinxSPIPS),
674 VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, XLNX_SPIPS_R_MAX),
675 VMSTATE_UINT8(snoop_state, XilinxSPIPS),
676 VMSTATE_END_OF_LIST()
680 static Property xilinx_spips_properties[] = {
681 DEFINE_PROP_UINT8("num-busses", XilinxSPIPS, num_busses, 1),
682 DEFINE_PROP_UINT8("num-ss-bits", XilinxSPIPS, num_cs, 4),
683 DEFINE_PROP_UINT8("num-txrx-bytes", XilinxSPIPS, num_txrx_bytes, 1),
684 DEFINE_PROP_END_OF_LIST(),
687 static void xilinx_qspips_class_init(ObjectClass *klass, void * data)
689 DeviceClass *dc = DEVICE_CLASS(klass);
690 XilinxSPIPSClass *xsc = XILINX_SPIPS_CLASS(klass);
692 dc->realize = xilinx_qspips_realize;
693 xsc->reg_ops = &qspips_ops;
694 xsc->rx_fifo_size = RXFF_A_Q;
695 xsc->tx_fifo_size = TXFF_A_Q;
698 static void xilinx_spips_class_init(ObjectClass *klass, void *data)
700 DeviceClass *dc = DEVICE_CLASS(klass);
701 XilinxSPIPSClass *xsc = XILINX_SPIPS_CLASS(klass);
703 dc->realize = xilinx_spips_realize;
704 dc->reset = xilinx_spips_reset;
705 dc->props = xilinx_spips_properties;
706 dc->vmsd = &vmstate_xilinx_spips;
708 xsc->reg_ops = &spips_ops;
709 xsc->rx_fifo_size = RXFF_A;
710 xsc->tx_fifo_size = TXFF_A;
713 static const TypeInfo xilinx_spips_info = {
714 .name = TYPE_XILINX_SPIPS,
715 .parent = TYPE_SYS_BUS_DEVICE,
716 .instance_size = sizeof(XilinxSPIPS),
717 .class_init = xilinx_spips_class_init,
718 .class_size = sizeof(XilinxSPIPSClass),
721 static const TypeInfo xilinx_qspips_info = {
722 .name = TYPE_XILINX_QSPIPS,
723 .parent = TYPE_XILINX_SPIPS,
724 .instance_size = sizeof(XilinxQSPIPS),
725 .class_init = xilinx_qspips_class_init,
728 static void xilinx_spips_register_types(void)
730 type_register_static(&xilinx_spips_info);
731 type_register_static(&xilinx_qspips_info);
734 type_init(xilinx_spips_register_types)