4 * Copyright IBM, Corp. 2008
7 * Anthony Liguori <aliguori@us.ibm.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
12 * Contributions after 2012-01-13 are licensed under the terms of the
13 * GNU GPL, version 2 or (at your option) any later version.
16 #include "qemu-common.h"
17 #include "qemu/error-report.h"
18 #include "qemu/main-loop.h"
19 #include "migration/migration.h"
20 #include "migration/qemu-file.h"
21 #include "sysemu/sysemu.h"
22 #include "block/block.h"
23 #include "qapi/qmp/qerror.h"
24 #include "qapi/util.h"
25 #include "qemu/sockets.h"
27 #include "migration/block.h"
28 #include "migration/postcopy-ram.h"
29 #include "qemu/thread.h"
30 #include "qmp-commands.h"
32 #include "qapi-event.h"
34 #include "exec/memory.h"
35 #include "exec/address-spaces.h"
37 #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */
39 /* Amount of time to allocate to each "chunk" of bandwidth-throttled
41 #define BUFFER_DELAY 100
42 #define XFER_LIMIT_RATIO (1000 / BUFFER_DELAY)
44 /* Default compression thread count */
45 #define DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT 8
46 /* Default decompression thread count, usually decompression is at
47 * least 4 times as fast as compression.*/
48 #define DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT 2
49 /*0: means nocompress, 1: best speed, ... 9: best compress ratio */
50 #define DEFAULT_MIGRATE_COMPRESS_LEVEL 1
51 /* Define default autoconverge cpu throttle migration parameters */
52 #define DEFAULT_MIGRATE_X_CPU_THROTTLE_INITIAL 20
53 #define DEFAULT_MIGRATE_X_CPU_THROTTLE_INCREMENT 10
55 /* Migration XBZRLE default cache size */
56 #define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024)
58 static NotifierList migration_state_notifiers
=
59 NOTIFIER_LIST_INITIALIZER(migration_state_notifiers
);
61 static bool deferred_incoming
;
64 * Current state of incoming postcopy; note this is not part of
65 * MigrationIncomingState since it's state is used during cleanup
66 * at the end as MIS is being freed.
68 static PostcopyState incoming_postcopy_state
;
70 /* When we add fault tolerance, we could have several
71 migrations at once. For now we don't need to add
72 dynamic creation of migration */
75 MigrationState
*migrate_get_current(void)
78 static MigrationState current_migration
= {
79 .state
= MIGRATION_STATUS_NONE
,
80 .bandwidth_limit
= MAX_THROTTLE
,
81 .xbzrle_cache_size
= DEFAULT_MIGRATE_CACHE_SIZE
,
83 .parameters
[MIGRATION_PARAMETER_COMPRESS_LEVEL
] =
84 DEFAULT_MIGRATE_COMPRESS_LEVEL
,
85 .parameters
[MIGRATION_PARAMETER_COMPRESS_THREADS
] =
86 DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT
,
87 .parameters
[MIGRATION_PARAMETER_DECOMPRESS_THREADS
] =
88 DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT
,
89 .parameters
[MIGRATION_PARAMETER_X_CPU_THROTTLE_INITIAL
] =
90 DEFAULT_MIGRATE_X_CPU_THROTTLE_INITIAL
,
91 .parameters
[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT
] =
92 DEFAULT_MIGRATE_X_CPU_THROTTLE_INCREMENT
,
96 qemu_mutex_init(¤t_migration
.src_page_req_mutex
);
99 return ¤t_migration
;
103 static MigrationIncomingState
*mis_current
;
105 MigrationIncomingState
*migration_incoming_get_current(void)
110 MigrationIncomingState
*migration_incoming_state_new(QEMUFile
* f
)
112 mis_current
= g_new0(MigrationIncomingState
, 1);
113 mis_current
->from_src_file
= f
;
114 QLIST_INIT(&mis_current
->loadvm_handlers
);
115 qemu_mutex_init(&mis_current
->rp_mutex
);
116 qemu_event_init(&mis_current
->main_thread_load_event
, false);
121 void migration_incoming_state_destroy(void)
123 qemu_event_destroy(&mis_current
->main_thread_load_event
);
124 loadvm_free_handlers(mis_current
);
133 uint8_t runstate
[100];
138 static GlobalState global_state
;
140 int global_state_store(void)
142 if (!runstate_store((char *)global_state
.runstate
,
143 sizeof(global_state
.runstate
))) {
144 error_report("runstate name too big: %s", global_state
.runstate
);
145 trace_migrate_state_too_big();
151 void global_state_store_running(void)
153 const char *state
= RunState_lookup
[RUN_STATE_RUNNING
];
154 strncpy((char *)global_state
.runstate
,
155 state
, sizeof(global_state
.runstate
));
158 static bool global_state_received(void)
160 return global_state
.received
;
163 static RunState
global_state_get_runstate(void)
165 return global_state
.state
;
168 void global_state_set_optional(void)
170 global_state
.optional
= true;
173 static bool global_state_needed(void *opaque
)
175 GlobalState
*s
= opaque
;
176 char *runstate
= (char *)s
->runstate
;
178 /* If it is not optional, it is mandatory */
180 if (s
->optional
== false) {
184 /* If state is running or paused, it is not needed */
186 if (strcmp(runstate
, "running") == 0 ||
187 strcmp(runstate
, "paused") == 0) {
191 /* for any other state it is needed */
195 static int global_state_post_load(void *opaque
, int version_id
)
197 GlobalState
*s
= opaque
;
198 Error
*local_err
= NULL
;
200 char *runstate
= (char *)s
->runstate
;
203 trace_migrate_global_state_post_load(runstate
);
205 r
= qapi_enum_parse(RunState_lookup
, runstate
, RUN_STATE__MAX
,
210 error_report_err(local_err
);
219 static void global_state_pre_save(void *opaque
)
221 GlobalState
*s
= opaque
;
223 trace_migrate_global_state_pre_save((char *)s
->runstate
);
224 s
->size
= strlen((char *)s
->runstate
) + 1;
227 static const VMStateDescription vmstate_globalstate
= {
228 .name
= "globalstate",
230 .minimum_version_id
= 1,
231 .post_load
= global_state_post_load
,
232 .pre_save
= global_state_pre_save
,
233 .needed
= global_state_needed
,
234 .fields
= (VMStateField
[]) {
235 VMSTATE_UINT32(size
, GlobalState
),
236 VMSTATE_BUFFER(runstate
, GlobalState
),
237 VMSTATE_END_OF_LIST()
241 void register_global_state(void)
243 /* We would use it independently that we receive it */
244 strcpy((char *)&global_state
.runstate
, "");
245 global_state
.received
= false;
246 vmstate_register(NULL
, 0, &vmstate_globalstate
, &global_state
);
249 static void migrate_generate_event(int new_state
)
251 if (migrate_use_events()) {
252 qapi_event_send_migration(new_state
, &error_abort
);
257 * Called on -incoming with a defer: uri.
258 * The migration can be started later after any parameters have been
261 static void deferred_incoming_migration(Error
**errp
)
263 if (deferred_incoming
) {
264 error_setg(errp
, "Incoming migration already deferred");
266 deferred_incoming
= true;
269 /* Request a range of pages from the source VM at the given
271 * rbname: Name of the RAMBlock to request the page in, if NULL it's the same
272 * as the last request (a name must have been given previously)
273 * Start: Address offset within the RB
274 * Len: Length in bytes required - must be a multiple of pagesize
276 void migrate_send_rp_req_pages(MigrationIncomingState
*mis
, const char *rbname
,
277 ram_addr_t start
, size_t len
)
279 uint8_t bufc
[12 + 1 + 255]; /* start (8), len (4), rbname upto 256 */
280 size_t msglen
= 12; /* start + len */
282 *(uint64_t *)bufc
= cpu_to_be64((uint64_t)start
);
283 *(uint32_t *)(bufc
+ 8) = cpu_to_be32((uint32_t)len
);
286 int rbname_len
= strlen(rbname
);
287 assert(rbname_len
< 256);
289 bufc
[msglen
++] = rbname_len
;
290 memcpy(bufc
+ msglen
, rbname
, rbname_len
);
291 msglen
+= rbname_len
;
292 migrate_send_rp_message(mis
, MIG_RP_MSG_REQ_PAGES_ID
, msglen
, bufc
);
294 migrate_send_rp_message(mis
, MIG_RP_MSG_REQ_PAGES
, msglen
, bufc
);
298 void qemu_start_incoming_migration(const char *uri
, Error
**errp
)
302 qapi_event_send_migration(MIGRATION_STATUS_SETUP
, &error_abort
);
303 if (!strcmp(uri
, "defer")) {
304 deferred_incoming_migration(errp
);
305 } else if (strstart(uri
, "tcp:", &p
)) {
306 tcp_start_incoming_migration(p
, errp
);
308 } else if (strstart(uri
, "rdma:", &p
)) {
309 rdma_start_incoming_migration(p
, errp
);
312 } else if (strstart(uri
, "exec:", &p
)) {
313 exec_start_incoming_migration(p
, errp
);
314 } else if (strstart(uri
, "unix:", &p
)) {
315 unix_start_incoming_migration(p
, errp
);
316 } else if (strstart(uri
, "fd:", &p
)) {
317 fd_start_incoming_migration(p
, errp
);
320 error_setg(errp
, "unknown migration protocol: %s", uri
);
324 static void process_incoming_migration_co(void *opaque
)
326 QEMUFile
*f
= opaque
;
327 Error
*local_err
= NULL
;
328 MigrationIncomingState
*mis
;
332 mis
= migration_incoming_state_new(f
);
333 postcopy_state_set(POSTCOPY_INCOMING_NONE
);
334 migrate_generate_event(MIGRATION_STATUS_ACTIVE
);
336 ret
= qemu_loadvm_state(f
);
338 ps
= postcopy_state_get();
339 trace_process_incoming_migration_co_end(ret
, ps
);
340 if (ps
!= POSTCOPY_INCOMING_NONE
) {
341 if (ps
== POSTCOPY_INCOMING_ADVISE
) {
343 * Where a migration had postcopy enabled (and thus went to advise)
344 * but managed to complete within the precopy period, we can use
347 postcopy_ram_incoming_cleanup(mis
);
348 } else if (ret
>= 0) {
350 * Postcopy was started, cleanup should happen at the end of the
353 trace_process_incoming_migration_co_postcopy_end_main();
356 /* Else if something went wrong then just fall out of the normal exit */
360 free_xbzrle_decoded_buf();
361 migration_incoming_state_destroy();
364 migrate_generate_event(MIGRATION_STATUS_FAILED
);
365 error_report("load of migration failed: %s", strerror(-ret
));
366 migrate_decompress_threads_join();
370 /* Make sure all file formats flush their mutable metadata */
371 bdrv_invalidate_cache_all(&local_err
);
373 migrate_generate_event(MIGRATION_STATUS_FAILED
);
374 error_report_err(local_err
);
375 migrate_decompress_threads_join();
380 * This must happen after all error conditions are dealt with and
381 * we're sure the VM is going to be running on this host.
383 qemu_announce_self();
385 /* If global state section was not received or we are in running
386 state, we need to obey autostart. Any other state is set with
389 if (!global_state_received() ||
390 global_state_get_runstate() == RUN_STATE_RUNNING
) {
394 runstate_set(RUN_STATE_PAUSED
);
397 runstate_set(global_state_get_runstate());
399 migrate_decompress_threads_join();
401 * This must happen after any state changes since as soon as an external
402 * observer sees this event they might start to prod at the VM assuming
405 migrate_generate_event(MIGRATION_STATUS_COMPLETED
);
408 void process_incoming_migration(QEMUFile
*f
)
410 Coroutine
*co
= qemu_coroutine_create(process_incoming_migration_co
);
411 int fd
= qemu_get_fd(f
);
414 migrate_decompress_threads_create();
415 qemu_set_nonblock(fd
);
416 qemu_coroutine_enter(co
, f
);
420 * Send a message on the return channel back to the source
423 void migrate_send_rp_message(MigrationIncomingState
*mis
,
424 enum mig_rp_message_type message_type
,
425 uint16_t len
, void *data
)
427 trace_migrate_send_rp_message((int)message_type
, len
);
428 qemu_mutex_lock(&mis
->rp_mutex
);
429 qemu_put_be16(mis
->to_src_file
, (unsigned int)message_type
);
430 qemu_put_be16(mis
->to_src_file
, len
);
431 qemu_put_buffer(mis
->to_src_file
, data
, len
);
432 qemu_fflush(mis
->to_src_file
);
433 qemu_mutex_unlock(&mis
->rp_mutex
);
437 * Send a 'SHUT' message on the return channel with the given value
438 * to indicate that we've finished with the RP. Non-0 value indicates
441 void migrate_send_rp_shut(MigrationIncomingState
*mis
,
446 buf
= cpu_to_be32(value
);
447 migrate_send_rp_message(mis
, MIG_RP_MSG_SHUT
, sizeof(buf
), &buf
);
451 * Send a 'PONG' message on the return channel with the given value
452 * (normally in response to a 'PING')
454 void migrate_send_rp_pong(MigrationIncomingState
*mis
,
459 buf
= cpu_to_be32(value
);
460 migrate_send_rp_message(mis
, MIG_RP_MSG_PONG
, sizeof(buf
), &buf
);
463 /* amount of nanoseconds we are willing to wait for migration to be down.
464 * the choice of nanoseconds is because it is the maximum resolution that
465 * get_clock() can achieve. It is an internal measure. All user-visible
466 * units must be in seconds */
467 static uint64_t max_downtime
= 300000000;
469 uint64_t migrate_max_downtime(void)
474 MigrationCapabilityStatusList
*qmp_query_migrate_capabilities(Error
**errp
)
476 MigrationCapabilityStatusList
*head
= NULL
;
477 MigrationCapabilityStatusList
*caps
;
478 MigrationState
*s
= migrate_get_current();
481 caps
= NULL
; /* silence compiler warning */
482 for (i
= 0; i
< MIGRATION_CAPABILITY__MAX
; i
++) {
484 head
= g_malloc0(sizeof(*caps
));
487 caps
->next
= g_malloc0(sizeof(*caps
));
491 g_malloc(sizeof(*caps
->value
));
492 caps
->value
->capability
= i
;
493 caps
->value
->state
= s
->enabled_capabilities
[i
];
499 MigrationParameters
*qmp_query_migrate_parameters(Error
**errp
)
501 MigrationParameters
*params
;
502 MigrationState
*s
= migrate_get_current();
504 params
= g_malloc0(sizeof(*params
));
505 params
->compress_level
= s
->parameters
[MIGRATION_PARAMETER_COMPRESS_LEVEL
];
506 params
->compress_threads
=
507 s
->parameters
[MIGRATION_PARAMETER_COMPRESS_THREADS
];
508 params
->decompress_threads
=
509 s
->parameters
[MIGRATION_PARAMETER_DECOMPRESS_THREADS
];
510 params
->x_cpu_throttle_initial
=
511 s
->parameters
[MIGRATION_PARAMETER_X_CPU_THROTTLE_INITIAL
];
512 params
->x_cpu_throttle_increment
=
513 s
->parameters
[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT
];
519 * Return true if we're already in the middle of a migration
520 * (i.e. any of the active or setup states)
522 static bool migration_is_setup_or_active(int state
)
525 case MIGRATION_STATUS_ACTIVE
:
526 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
527 case MIGRATION_STATUS_SETUP
:
536 static void get_xbzrle_cache_stats(MigrationInfo
*info
)
538 if (migrate_use_xbzrle()) {
539 info
->has_xbzrle_cache
= true;
540 info
->xbzrle_cache
= g_malloc0(sizeof(*info
->xbzrle_cache
));
541 info
->xbzrle_cache
->cache_size
= migrate_xbzrle_cache_size();
542 info
->xbzrle_cache
->bytes
= xbzrle_mig_bytes_transferred();
543 info
->xbzrle_cache
->pages
= xbzrle_mig_pages_transferred();
544 info
->xbzrle_cache
->cache_miss
= xbzrle_mig_pages_cache_miss();
545 info
->xbzrle_cache
->cache_miss_rate
= xbzrle_mig_cache_miss_rate();
546 info
->xbzrle_cache
->overflow
= xbzrle_mig_pages_overflow();
550 MigrationInfo
*qmp_query_migrate(Error
**errp
)
552 MigrationInfo
*info
= g_malloc0(sizeof(*info
));
553 MigrationState
*s
= migrate_get_current();
556 case MIGRATION_STATUS_NONE
:
557 /* no migration has happened ever */
559 case MIGRATION_STATUS_SETUP
:
560 info
->has_status
= true;
561 info
->has_total_time
= false;
563 case MIGRATION_STATUS_ACTIVE
:
564 case MIGRATION_STATUS_CANCELLING
:
565 info
->has_status
= true;
566 info
->has_total_time
= true;
567 info
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
)
569 info
->has_expected_downtime
= true;
570 info
->expected_downtime
= s
->expected_downtime
;
571 info
->has_setup_time
= true;
572 info
->setup_time
= s
->setup_time
;
574 info
->has_ram
= true;
575 info
->ram
= g_malloc0(sizeof(*info
->ram
));
576 info
->ram
->transferred
= ram_bytes_transferred();
577 info
->ram
->remaining
= ram_bytes_remaining();
578 info
->ram
->total
= ram_bytes_total();
579 info
->ram
->duplicate
= dup_mig_pages_transferred();
580 info
->ram
->skipped
= skipped_mig_pages_transferred();
581 info
->ram
->normal
= norm_mig_pages_transferred();
582 info
->ram
->normal_bytes
= norm_mig_bytes_transferred();
583 info
->ram
->dirty_pages_rate
= s
->dirty_pages_rate
;
584 info
->ram
->mbps
= s
->mbps
;
585 info
->ram
->dirty_sync_count
= s
->dirty_sync_count
;
587 if (blk_mig_active()) {
588 info
->has_disk
= true;
589 info
->disk
= g_malloc0(sizeof(*info
->disk
));
590 info
->disk
->transferred
= blk_mig_bytes_transferred();
591 info
->disk
->remaining
= blk_mig_bytes_remaining();
592 info
->disk
->total
= blk_mig_bytes_total();
595 if (cpu_throttle_active()) {
596 info
->has_x_cpu_throttle_percentage
= true;
597 info
->x_cpu_throttle_percentage
= cpu_throttle_get_percentage();
600 get_xbzrle_cache_stats(info
);
602 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
603 /* Mostly the same as active; TODO add some postcopy stats */
604 info
->has_status
= true;
605 info
->has_total_time
= true;
606 info
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
)
608 info
->has_expected_downtime
= true;
609 info
->expected_downtime
= s
->expected_downtime
;
610 info
->has_setup_time
= true;
611 info
->setup_time
= s
->setup_time
;
613 info
->has_ram
= true;
614 info
->ram
= g_malloc0(sizeof(*info
->ram
));
615 info
->ram
->transferred
= ram_bytes_transferred();
616 info
->ram
->remaining
= ram_bytes_remaining();
617 info
->ram
->total
= ram_bytes_total();
618 info
->ram
->duplicate
= dup_mig_pages_transferred();
619 info
->ram
->skipped
= skipped_mig_pages_transferred();
620 info
->ram
->normal
= norm_mig_pages_transferred();
621 info
->ram
->normal_bytes
= norm_mig_bytes_transferred();
622 info
->ram
->dirty_pages_rate
= s
->dirty_pages_rate
;
623 info
->ram
->mbps
= s
->mbps
;
625 if (blk_mig_active()) {
626 info
->has_disk
= true;
627 info
->disk
= g_malloc0(sizeof(*info
->disk
));
628 info
->disk
->transferred
= blk_mig_bytes_transferred();
629 info
->disk
->remaining
= blk_mig_bytes_remaining();
630 info
->disk
->total
= blk_mig_bytes_total();
633 get_xbzrle_cache_stats(info
);
635 case MIGRATION_STATUS_COMPLETED
:
636 get_xbzrle_cache_stats(info
);
638 info
->has_status
= true;
639 info
->has_total_time
= true;
640 info
->total_time
= s
->total_time
;
641 info
->has_downtime
= true;
642 info
->downtime
= s
->downtime
;
643 info
->has_setup_time
= true;
644 info
->setup_time
= s
->setup_time
;
646 info
->has_ram
= true;
647 info
->ram
= g_malloc0(sizeof(*info
->ram
));
648 info
->ram
->transferred
= ram_bytes_transferred();
649 info
->ram
->remaining
= 0;
650 info
->ram
->total
= ram_bytes_total();
651 info
->ram
->duplicate
= dup_mig_pages_transferred();
652 info
->ram
->skipped
= skipped_mig_pages_transferred();
653 info
->ram
->normal
= norm_mig_pages_transferred();
654 info
->ram
->normal_bytes
= norm_mig_bytes_transferred();
655 info
->ram
->mbps
= s
->mbps
;
656 info
->ram
->dirty_sync_count
= s
->dirty_sync_count
;
658 case MIGRATION_STATUS_FAILED
:
659 info
->has_status
= true;
661 case MIGRATION_STATUS_CANCELLED
:
662 info
->has_status
= true;
665 info
->status
= s
->state
;
670 void qmp_migrate_set_capabilities(MigrationCapabilityStatusList
*params
,
673 MigrationState
*s
= migrate_get_current();
674 MigrationCapabilityStatusList
*cap
;
676 if (migration_is_setup_or_active(s
->state
)) {
677 error_setg(errp
, QERR_MIGRATION_ACTIVE
);
681 for (cap
= params
; cap
; cap
= cap
->next
) {
682 s
->enabled_capabilities
[cap
->value
->capability
] = cap
->value
->state
;
685 if (migrate_postcopy_ram()) {
686 if (migrate_use_compression()) {
687 /* The decompression threads asynchronously write into RAM
688 * rather than use the atomic copies needed to avoid
689 * userfaulting. It should be possible to fix the decompression
690 * threads for compatibility in future.
692 error_report("Postcopy is not currently compatible with "
694 s
->enabled_capabilities
[MIGRATION_CAPABILITY_X_POSTCOPY_RAM
] =
700 void qmp_migrate_set_parameters(bool has_compress_level
,
701 int64_t compress_level
,
702 bool has_compress_threads
,
703 int64_t compress_threads
,
704 bool has_decompress_threads
,
705 int64_t decompress_threads
,
706 bool has_x_cpu_throttle_initial
,
707 int64_t x_cpu_throttle_initial
,
708 bool has_x_cpu_throttle_increment
,
709 int64_t x_cpu_throttle_increment
, Error
**errp
)
711 MigrationState
*s
= migrate_get_current();
713 if (has_compress_level
&& (compress_level
< 0 || compress_level
> 9)) {
714 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "compress_level",
715 "is invalid, it should be in the range of 0 to 9");
718 if (has_compress_threads
&&
719 (compress_threads
< 1 || compress_threads
> 255)) {
720 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
722 "is invalid, it should be in the range of 1 to 255");
725 if (has_decompress_threads
&&
726 (decompress_threads
< 1 || decompress_threads
> 255)) {
727 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
728 "decompress_threads",
729 "is invalid, it should be in the range of 1 to 255");
732 if (has_x_cpu_throttle_initial
&&
733 (x_cpu_throttle_initial
< 1 || x_cpu_throttle_initial
> 99)) {
734 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
735 "x_cpu_throttle_initial",
736 "an integer in the range of 1 to 99");
738 if (has_x_cpu_throttle_increment
&&
739 (x_cpu_throttle_increment
< 1 || x_cpu_throttle_increment
> 99)) {
740 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
741 "x_cpu_throttle_increment",
742 "an integer in the range of 1 to 99");
745 if (has_compress_level
) {
746 s
->parameters
[MIGRATION_PARAMETER_COMPRESS_LEVEL
] = compress_level
;
748 if (has_compress_threads
) {
749 s
->parameters
[MIGRATION_PARAMETER_COMPRESS_THREADS
] = compress_threads
;
751 if (has_decompress_threads
) {
752 s
->parameters
[MIGRATION_PARAMETER_DECOMPRESS_THREADS
] =
755 if (has_x_cpu_throttle_initial
) {
756 s
->parameters
[MIGRATION_PARAMETER_X_CPU_THROTTLE_INITIAL
] =
757 x_cpu_throttle_initial
;
760 if (has_x_cpu_throttle_increment
) {
761 s
->parameters
[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT
] =
762 x_cpu_throttle_increment
;
766 void qmp_migrate_start_postcopy(Error
**errp
)
768 MigrationState
*s
= migrate_get_current();
770 if (!migrate_postcopy_ram()) {
771 error_setg(errp
, "Enable postcopy with migrate_set_capability before"
772 " the start of migration");
776 if (s
->state
== MIGRATION_STATUS_NONE
) {
777 error_setg(errp
, "Postcopy must be started after migration has been"
782 * we don't error if migration has finished since that would be racy
783 * with issuing this command.
785 atomic_set(&s
->start_postcopy
, true);
788 /* shared migration helpers */
790 static void migrate_set_state(MigrationState
*s
, int old_state
, int new_state
)
792 if (atomic_cmpxchg(&s
->state
, old_state
, new_state
) == old_state
) {
793 trace_migrate_set_state(new_state
);
794 migrate_generate_event(new_state
);
798 static void migrate_fd_cleanup(void *opaque
)
800 MigrationState
*s
= opaque
;
802 qemu_bh_delete(s
->cleanup_bh
);
803 s
->cleanup_bh
= NULL
;
808 trace_migrate_fd_cleanup();
809 qemu_mutex_unlock_iothread();
810 if (s
->migration_thread_running
) {
811 qemu_thread_join(&s
->thread
);
812 s
->migration_thread_running
= false;
814 qemu_mutex_lock_iothread();
816 migrate_compress_threads_join();
817 qemu_fclose(s
->file
);
821 assert((s
->state
!= MIGRATION_STATUS_ACTIVE
) &&
822 (s
->state
!= MIGRATION_STATUS_POSTCOPY_ACTIVE
));
824 if (s
->state
== MIGRATION_STATUS_CANCELLING
) {
825 migrate_set_state(s
, MIGRATION_STATUS_CANCELLING
,
826 MIGRATION_STATUS_CANCELLED
);
829 notifier_list_notify(&migration_state_notifiers
, s
);
832 void migrate_fd_error(MigrationState
*s
)
834 trace_migrate_fd_error();
835 assert(s
->file
== NULL
);
836 migrate_set_state(s
, MIGRATION_STATUS_SETUP
, MIGRATION_STATUS_FAILED
);
837 notifier_list_notify(&migration_state_notifiers
, s
);
840 static void migrate_fd_cancel(MigrationState
*s
)
843 QEMUFile
*f
= migrate_get_current()->file
;
844 trace_migrate_fd_cancel();
846 if (s
->rp_state
.from_dst_file
) {
847 /* shutdown the rp socket, so causing the rp thread to shutdown */
848 qemu_file_shutdown(s
->rp_state
.from_dst_file
);
852 old_state
= s
->state
;
853 if (!migration_is_setup_or_active(old_state
)) {
856 migrate_set_state(s
, old_state
, MIGRATION_STATUS_CANCELLING
);
857 } while (s
->state
!= MIGRATION_STATUS_CANCELLING
);
860 * If we're unlucky the migration code might be stuck somewhere in a
861 * send/write while the network has failed and is waiting to timeout;
862 * if we've got shutdown(2) available then we can force it to quit.
863 * The outgoing qemu file gets closed in migrate_fd_cleanup that is
864 * called in a bh, so there is no race against this cancel.
866 if (s
->state
== MIGRATION_STATUS_CANCELLING
&& f
) {
867 qemu_file_shutdown(f
);
871 void add_migration_state_change_notifier(Notifier
*notify
)
873 notifier_list_add(&migration_state_notifiers
, notify
);
876 void remove_migration_state_change_notifier(Notifier
*notify
)
878 notifier_remove(notify
);
881 bool migration_in_setup(MigrationState
*s
)
883 return s
->state
== MIGRATION_STATUS_SETUP
;
886 bool migration_has_finished(MigrationState
*s
)
888 return s
->state
== MIGRATION_STATUS_COMPLETED
;
891 bool migration_has_failed(MigrationState
*s
)
893 return (s
->state
== MIGRATION_STATUS_CANCELLED
||
894 s
->state
== MIGRATION_STATUS_FAILED
);
897 bool migration_in_postcopy(MigrationState
*s
)
899 return (s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
);
902 MigrationState
*migrate_init(const MigrationParams
*params
)
904 MigrationState
*s
= migrate_get_current();
907 * Reinitialise all migration state, except
908 * parameters/capabilities that the user set, and
915 s
->state
= MIGRATION_STATUS_NONE
;
917 s
->rp_state
.from_dst_file
= NULL
;
918 s
->rp_state
.error
= false;
921 s
->expected_downtime
= 0;
922 s
->dirty_pages_rate
= 0;
923 s
->dirty_bytes_rate
= 0;
925 s
->dirty_sync_count
= 0;
926 s
->start_postcopy
= false;
927 s
->migration_thread_running
= false;
928 s
->last_req_rb
= NULL
;
930 migrate_set_state(s
, MIGRATION_STATUS_NONE
, MIGRATION_STATUS_SETUP
);
932 QSIMPLEQ_INIT(&s
->src_page_requests
);
934 s
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
938 static GSList
*migration_blockers
;
940 void migrate_add_blocker(Error
*reason
)
942 migration_blockers
= g_slist_prepend(migration_blockers
, reason
);
945 void migrate_del_blocker(Error
*reason
)
947 migration_blockers
= g_slist_remove(migration_blockers
, reason
);
950 void qmp_migrate_incoming(const char *uri
, Error
**errp
)
952 Error
*local_err
= NULL
;
953 static bool once
= true;
955 if (!deferred_incoming
) {
956 error_setg(errp
, "For use with '-incoming defer'");
960 error_setg(errp
, "The incoming migration has already been started");
963 qemu_start_incoming_migration(uri
, &local_err
);
966 error_propagate(errp
, local_err
);
973 void qmp_migrate(const char *uri
, bool has_blk
, bool blk
,
974 bool has_inc
, bool inc
, bool has_detach
, bool detach
,
977 Error
*local_err
= NULL
;
978 MigrationState
*s
= migrate_get_current();
979 MigrationParams params
;
982 params
.blk
= has_blk
&& blk
;
983 params
.shared
= has_inc
&& inc
;
985 if (migration_is_setup_or_active(s
->state
) ||
986 s
->state
== MIGRATION_STATUS_CANCELLING
) {
987 error_setg(errp
, QERR_MIGRATION_ACTIVE
);
990 if (runstate_check(RUN_STATE_INMIGRATE
)) {
991 error_setg(errp
, "Guest is waiting for an incoming migration");
995 if (qemu_savevm_state_blocked(errp
)) {
999 if (migration_blockers
) {
1000 *errp
= error_copy(migration_blockers
->data
);
1004 /* We are starting a new migration, so we want to start in a clean
1005 state. This change is only needed if previous migration
1006 failed/was cancelled. We don't use migrate_set_state() because
1007 we are setting the initial state, not changing it. */
1008 s
->state
= MIGRATION_STATUS_NONE
;
1010 s
= migrate_init(¶ms
);
1012 if (strstart(uri
, "tcp:", &p
)) {
1013 tcp_start_outgoing_migration(s
, p
, &local_err
);
1015 } else if (strstart(uri
, "rdma:", &p
)) {
1016 rdma_start_outgoing_migration(s
, p
, &local_err
);
1019 } else if (strstart(uri
, "exec:", &p
)) {
1020 exec_start_outgoing_migration(s
, p
, &local_err
);
1021 } else if (strstart(uri
, "unix:", &p
)) {
1022 unix_start_outgoing_migration(s
, p
, &local_err
);
1023 } else if (strstart(uri
, "fd:", &p
)) {
1024 fd_start_outgoing_migration(s
, p
, &local_err
);
1027 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "uri",
1028 "a valid migration protocol");
1029 migrate_set_state(s
, MIGRATION_STATUS_SETUP
, MIGRATION_STATUS_FAILED
);
1034 migrate_fd_error(s
);
1035 error_propagate(errp
, local_err
);
1040 void qmp_migrate_cancel(Error
**errp
)
1042 migrate_fd_cancel(migrate_get_current());
1045 void qmp_migrate_set_cache_size(int64_t value
, Error
**errp
)
1047 MigrationState
*s
= migrate_get_current();
1050 /* Check for truncation */
1051 if (value
!= (size_t)value
) {
1052 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1053 "exceeding address space");
1057 /* Cache should not be larger than guest ram size */
1058 if (value
> ram_bytes_total()) {
1059 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1060 "exceeds guest ram size ");
1064 new_size
= xbzrle_cache_resize(value
);
1066 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1067 "is smaller than page size");
1071 s
->xbzrle_cache_size
= new_size
;
1074 int64_t qmp_query_migrate_cache_size(Error
**errp
)
1076 return migrate_xbzrle_cache_size();
1079 void qmp_migrate_set_speed(int64_t value
, Error
**errp
)
1086 if (value
> SIZE_MAX
) {
1090 s
= migrate_get_current();
1091 s
->bandwidth_limit
= value
;
1093 qemu_file_set_rate_limit(s
->file
, s
->bandwidth_limit
/ XFER_LIMIT_RATIO
);
1097 void qmp_migrate_set_downtime(double value
, Error
**errp
)
1100 value
= MAX(0, MIN(UINT64_MAX
, value
));
1101 max_downtime
= (uint64_t)value
;
1104 bool migrate_postcopy_ram(void)
1108 s
= migrate_get_current();
1110 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_X_POSTCOPY_RAM
];
1113 bool migrate_auto_converge(void)
1117 s
= migrate_get_current();
1119 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_AUTO_CONVERGE
];
1122 bool migrate_zero_blocks(void)
1126 s
= migrate_get_current();
1128 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_ZERO_BLOCKS
];
1131 bool migrate_use_compression(void)
1135 s
= migrate_get_current();
1137 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_COMPRESS
];
1140 int migrate_compress_level(void)
1144 s
= migrate_get_current();
1146 return s
->parameters
[MIGRATION_PARAMETER_COMPRESS_LEVEL
];
1149 int migrate_compress_threads(void)
1153 s
= migrate_get_current();
1155 return s
->parameters
[MIGRATION_PARAMETER_COMPRESS_THREADS
];
1158 int migrate_decompress_threads(void)
1162 s
= migrate_get_current();
1164 return s
->parameters
[MIGRATION_PARAMETER_DECOMPRESS_THREADS
];
1167 bool migrate_use_events(void)
1171 s
= migrate_get_current();
1173 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_EVENTS
];
1176 int migrate_use_xbzrle(void)
1180 s
= migrate_get_current();
1182 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_XBZRLE
];
1185 int64_t migrate_xbzrle_cache_size(void)
1189 s
= migrate_get_current();
1191 return s
->xbzrle_cache_size
;
1194 /* migration thread support */
1196 * Something bad happened to the RP stream, mark an error
1197 * The caller shall print or trace something to indicate why
1199 static void mark_source_rp_bad(MigrationState
*s
)
1201 s
->rp_state
.error
= true;
1204 static struct rp_cmd_args
{
1205 ssize_t len
; /* -1 = variable */
1208 [MIG_RP_MSG_INVALID
] = { .len
= -1, .name
= "INVALID" },
1209 [MIG_RP_MSG_SHUT
] = { .len
= 4, .name
= "SHUT" },
1210 [MIG_RP_MSG_PONG
] = { .len
= 4, .name
= "PONG" },
1211 [MIG_RP_MSG_REQ_PAGES
] = { .len
= 12, .name
= "REQ_PAGES" },
1212 [MIG_RP_MSG_REQ_PAGES_ID
] = { .len
= -1, .name
= "REQ_PAGES_ID" },
1213 [MIG_RP_MSG_MAX
] = { .len
= -1, .name
= "MAX" },
1217 * Process a request for pages received on the return path,
1218 * We're allowed to send more than requested (e.g. to round to our page size)
1219 * and we don't need to send pages that have already been sent.
1221 static void migrate_handle_rp_req_pages(MigrationState
*ms
, const char* rbname
,
1222 ram_addr_t start
, size_t len
)
1224 long our_host_ps
= getpagesize();
1226 trace_migrate_handle_rp_req_pages(rbname
, start
, len
);
1229 * Since we currently insist on matching page sizes, just sanity check
1230 * we're being asked for whole host pages.
1232 if (start
& (our_host_ps
-1) ||
1233 (len
& (our_host_ps
-1))) {
1234 error_report("%s: Misaligned page request, start: " RAM_ADDR_FMT
1235 " len: %zd", __func__
, start
, len
);
1236 mark_source_rp_bad(ms
);
1240 if (ram_save_queue_pages(ms
, rbname
, start
, len
)) {
1241 mark_source_rp_bad(ms
);
1246 * Handles messages sent on the return path towards the source VM
1249 static void *source_return_path_thread(void *opaque
)
1251 MigrationState
*ms
= opaque
;
1252 QEMUFile
*rp
= ms
->rp_state
.from_dst_file
;
1253 uint16_t header_len
, header_type
;
1254 const int max_len
= 512;
1255 uint8_t buf
[max_len
];
1256 uint32_t tmp32
, sibling_error
;
1257 ram_addr_t start
= 0; /* =0 to silence warning */
1258 size_t len
= 0, expected_len
;
1261 trace_source_return_path_thread_entry();
1262 while (!ms
->rp_state
.error
&& !qemu_file_get_error(rp
) &&
1263 migration_is_setup_or_active(ms
->state
)) {
1264 trace_source_return_path_thread_loop_top();
1265 header_type
= qemu_get_be16(rp
);
1266 header_len
= qemu_get_be16(rp
);
1268 if (header_type
>= MIG_RP_MSG_MAX
||
1269 header_type
== MIG_RP_MSG_INVALID
) {
1270 error_report("RP: Received invalid message 0x%04x length 0x%04x",
1271 header_type
, header_len
);
1272 mark_source_rp_bad(ms
);
1276 if ((rp_cmd_args
[header_type
].len
!= -1 &&
1277 header_len
!= rp_cmd_args
[header_type
].len
) ||
1278 header_len
> max_len
) {
1279 error_report("RP: Received '%s' message (0x%04x) with"
1280 "incorrect length %d expecting %zu",
1281 rp_cmd_args
[header_type
].name
, header_type
, header_len
,
1282 (size_t)rp_cmd_args
[header_type
].len
);
1283 mark_source_rp_bad(ms
);
1287 /* We know we've got a valid header by this point */
1288 res
= qemu_get_buffer(rp
, buf
, header_len
);
1289 if (res
!= header_len
) {
1290 error_report("RP: Failed reading data for message 0x%04x"
1291 " read %d expected %d",
1292 header_type
, res
, header_len
);
1293 mark_source_rp_bad(ms
);
1297 /* OK, we have the message and the data */
1298 switch (header_type
) {
1299 case MIG_RP_MSG_SHUT
:
1300 sibling_error
= be32_to_cpup((uint32_t *)buf
);
1301 trace_source_return_path_thread_shut(sibling_error
);
1302 if (sibling_error
) {
1303 error_report("RP: Sibling indicated error %d", sibling_error
);
1304 mark_source_rp_bad(ms
);
1307 * We'll let the main thread deal with closing the RP
1308 * we could do a shutdown(2) on it, but we're the only user
1309 * anyway, so there's nothing gained.
1313 case MIG_RP_MSG_PONG
:
1314 tmp32
= be32_to_cpup((uint32_t *)buf
);
1315 trace_source_return_path_thread_pong(tmp32
);
1318 case MIG_RP_MSG_REQ_PAGES
:
1319 start
= be64_to_cpup((uint64_t *)buf
);
1320 len
= be32_to_cpup((uint32_t *)(buf
+ 8));
1321 migrate_handle_rp_req_pages(ms
, NULL
, start
, len
);
1324 case MIG_RP_MSG_REQ_PAGES_ID
:
1325 expected_len
= 12 + 1; /* header + termination */
1327 if (header_len
>= expected_len
) {
1328 start
= be64_to_cpup((uint64_t *)buf
);
1329 len
= be32_to_cpup((uint32_t *)(buf
+ 8));
1330 /* Now we expect an idstr */
1331 tmp32
= buf
[12]; /* Length of the following idstr */
1332 buf
[13 + tmp32
] = '\0';
1333 expected_len
+= tmp32
;
1335 if (header_len
!= expected_len
) {
1336 error_report("RP: Req_Page_id with length %d expecting %zd",
1337 header_len
, expected_len
);
1338 mark_source_rp_bad(ms
);
1341 migrate_handle_rp_req_pages(ms
, (char *)&buf
[13], start
, len
);
1348 if (qemu_file_get_error(rp
)) {
1349 trace_source_return_path_thread_bad_end();
1350 mark_source_rp_bad(ms
);
1353 trace_source_return_path_thread_end();
1355 ms
->rp_state
.from_dst_file
= NULL
;
1360 static int open_return_path_on_source(MigrationState
*ms
)
1363 ms
->rp_state
.from_dst_file
= qemu_file_get_return_path(ms
->file
);
1364 if (!ms
->rp_state
.from_dst_file
) {
1368 trace_open_return_path_on_source();
1369 qemu_thread_create(&ms
->rp_state
.rp_thread
, "return path",
1370 source_return_path_thread
, ms
, QEMU_THREAD_JOINABLE
);
1372 trace_open_return_path_on_source_continue();
1377 /* Returns 0 if the RP was ok, otherwise there was an error on the RP */
1378 static int await_return_path_close_on_source(MigrationState
*ms
)
1381 * If this is a normal exit then the destination will send a SHUT and the
1382 * rp_thread will exit, however if there's an error we need to cause
1385 if (qemu_file_get_error(ms
->file
) && ms
->rp_state
.from_dst_file
) {
1387 * shutdown(2), if we have it, will cause it to unblock if it's stuck
1388 * waiting for the destination.
1390 qemu_file_shutdown(ms
->rp_state
.from_dst_file
);
1391 mark_source_rp_bad(ms
);
1393 trace_await_return_path_close_on_source_joining();
1394 qemu_thread_join(&ms
->rp_state
.rp_thread
);
1395 trace_await_return_path_close_on_source_close();
1396 return ms
->rp_state
.error
;
1400 * Switch from normal iteration to postcopy
1401 * Returns non-0 on error
1403 static int postcopy_start(MigrationState
*ms
, bool *old_vm_running
)
1406 const QEMUSizedBuffer
*qsb
;
1407 int64_t time_at_stop
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1408 migrate_set_state(ms
, MIGRATION_STATUS_ACTIVE
,
1409 MIGRATION_STATUS_POSTCOPY_ACTIVE
);
1411 trace_postcopy_start();
1412 qemu_mutex_lock_iothread();
1413 trace_postcopy_start_set_run();
1415 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER
);
1416 *old_vm_running
= runstate_is_running();
1417 global_state_store();
1418 ret
= vm_stop_force_state(RUN_STATE_FINISH_MIGRATE
);
1425 * Cause any non-postcopiable, but iterative devices to
1426 * send out their final data.
1428 qemu_savevm_state_complete_precopy(ms
->file
, true);
1431 * in Finish migrate and with the io-lock held everything should
1432 * be quiet, but we've potentially still got dirty pages and we
1433 * need to tell the destination to throw any pages it's already received
1436 if (ram_postcopy_send_discard_bitmap(ms
)) {
1437 error_report("postcopy send discard bitmap failed");
1442 * send rest of state - note things that are doing postcopy
1443 * will notice we're in POSTCOPY_ACTIVE and not actually
1444 * wrap their state up here
1446 qemu_file_set_rate_limit(ms
->file
, INT64_MAX
);
1447 /* Ping just for debugging, helps line traces up */
1448 qemu_savevm_send_ping(ms
->file
, 2);
1451 * While loading the device state we may trigger page transfer
1452 * requests and the fd must be free to process those, and thus
1453 * the destination must read the whole device state off the fd before
1454 * it starts processing it. Unfortunately the ad-hoc migration format
1455 * doesn't allow the destination to know the size to read without fully
1456 * parsing it through each devices load-state code (especially the open
1457 * coded devices that use get/put).
1458 * So we wrap the device state up in a package with a length at the start;
1459 * to do this we use a qemu_buf to hold the whole of the device state.
1461 QEMUFile
*fb
= qemu_bufopen("w", NULL
);
1463 error_report("Failed to create buffered file");
1468 * Make sure the receiver can get incoming pages before we send the rest
1471 qemu_savevm_send_postcopy_listen(fb
);
1473 qemu_savevm_state_complete_precopy(fb
, false);
1474 qemu_savevm_send_ping(fb
, 3);
1476 qemu_savevm_send_postcopy_run(fb
);
1478 /* <><> end of stuff going into the package */
1479 qsb
= qemu_buf_get(fb
);
1481 /* Now send that blob */
1482 if (qemu_savevm_send_packaged(ms
->file
, qsb
)) {
1486 ms
->downtime
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
) - time_at_stop
;
1488 qemu_mutex_unlock_iothread();
1491 * Although this ping is just for debug, it could potentially be
1492 * used for getting a better measurement of downtime at the source.
1494 qemu_savevm_send_ping(ms
->file
, 4);
1496 ret
= qemu_file_get_error(ms
->file
);
1498 error_report("postcopy_start: Migration stream errored");
1499 migrate_set_state(ms
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1500 MIGRATION_STATUS_FAILED
);
1508 migrate_set_state(ms
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1509 MIGRATION_STATUS_FAILED
);
1510 qemu_mutex_unlock_iothread();
1515 * migration_completion: Used by migration_thread when there's not much left.
1516 * The caller 'breaks' the loop when this returns.
1518 * @s: Current migration state
1519 * @current_active_state: The migration state we expect to be in
1520 * @*old_vm_running: Pointer to old_vm_running flag
1521 * @*start_time: Pointer to time to update
1523 static void migration_completion(MigrationState
*s
, int current_active_state
,
1524 bool *old_vm_running
,
1525 int64_t *start_time
)
1529 if (s
->state
== MIGRATION_STATUS_ACTIVE
) {
1530 qemu_mutex_lock_iothread();
1531 *start_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1532 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER
);
1533 *old_vm_running
= runstate_is_running();
1534 ret
= global_state_store();
1537 ret
= vm_stop_force_state(RUN_STATE_FINISH_MIGRATE
);
1539 qemu_file_set_rate_limit(s
->file
, INT64_MAX
);
1540 qemu_savevm_state_complete_precopy(s
->file
, false);
1543 qemu_mutex_unlock_iothread();
1548 } else if (s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
) {
1549 trace_migration_completion_postcopy_end();
1551 qemu_savevm_state_complete_postcopy(s
->file
);
1552 trace_migration_completion_postcopy_end_after_complete();
1556 * If rp was opened we must clean up the thread before
1557 * cleaning everything else up (since if there are no failures
1558 * it will wait for the destination to send it's status in
1560 * Postcopy opens rp if enabled (even if it's not avtivated)
1562 if (migrate_postcopy_ram()) {
1564 trace_migration_completion_postcopy_end_before_rp();
1565 rp_error
= await_return_path_close_on_source(s
);
1566 trace_migration_completion_postcopy_end_after_rp(rp_error
);
1572 if (qemu_file_get_error(s
->file
)) {
1573 trace_migration_completion_file_err();
1577 migrate_set_state(s
, current_active_state
, MIGRATION_STATUS_COMPLETED
);
1581 migrate_set_state(s
, current_active_state
, MIGRATION_STATUS_FAILED
);
1585 * Master migration thread on the source VM.
1586 * It drives the migration and pumps the data down the outgoing channel.
1588 static void *migration_thread(void *opaque
)
1590 MigrationState
*s
= opaque
;
1591 /* Used by the bandwidth calcs, updated later */
1592 int64_t initial_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1593 int64_t setup_start
= qemu_clock_get_ms(QEMU_CLOCK_HOST
);
1594 int64_t initial_bytes
= 0;
1595 int64_t max_size
= 0;
1596 int64_t start_time
= initial_time
;
1598 bool old_vm_running
= false;
1599 bool entered_postcopy
= false;
1600 /* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */
1601 enum MigrationStatus current_active_state
= MIGRATION_STATUS_ACTIVE
;
1603 rcu_register_thread();
1605 qemu_savevm_state_header(s
->file
);
1607 if (migrate_postcopy_ram()) {
1608 /* Now tell the dest that it should open its end so it can reply */
1609 qemu_savevm_send_open_return_path(s
->file
);
1611 /* And do a ping that will make stuff easier to debug */
1612 qemu_savevm_send_ping(s
->file
, 1);
1615 * Tell the destination that we *might* want to do postcopy later;
1616 * if the other end can't do postcopy it should fail now, nice and
1619 qemu_savevm_send_postcopy_advise(s
->file
);
1622 qemu_savevm_state_begin(s
->file
, &s
->params
);
1624 s
->setup_time
= qemu_clock_get_ms(QEMU_CLOCK_HOST
) - setup_start
;
1625 current_active_state
= MIGRATION_STATUS_ACTIVE
;
1626 migrate_set_state(s
, MIGRATION_STATUS_SETUP
, MIGRATION_STATUS_ACTIVE
);
1628 trace_migration_thread_setup_complete();
1630 while (s
->state
== MIGRATION_STATUS_ACTIVE
||
1631 s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
) {
1632 int64_t current_time
;
1633 uint64_t pending_size
;
1635 if (!qemu_file_rate_limit(s
->file
)) {
1636 uint64_t pend_post
, pend_nonpost
;
1638 qemu_savevm_state_pending(s
->file
, max_size
, &pend_nonpost
,
1640 pending_size
= pend_nonpost
+ pend_post
;
1641 trace_migrate_pending(pending_size
, max_size
,
1642 pend_post
, pend_nonpost
);
1643 if (pending_size
&& pending_size
>= max_size
) {
1644 /* Still a significant amount to transfer */
1646 if (migrate_postcopy_ram() &&
1647 s
->state
!= MIGRATION_STATUS_POSTCOPY_ACTIVE
&&
1648 pend_nonpost
<= max_size
&&
1649 atomic_read(&s
->start_postcopy
)) {
1651 if (!postcopy_start(s
, &old_vm_running
)) {
1652 current_active_state
= MIGRATION_STATUS_POSTCOPY_ACTIVE
;
1653 entered_postcopy
= true;
1658 /* Just another iteration step */
1659 qemu_savevm_state_iterate(s
->file
, entered_postcopy
);
1661 trace_migration_thread_low_pending(pending_size
);
1662 migration_completion(s
, current_active_state
,
1663 &old_vm_running
, &start_time
);
1668 if (qemu_file_get_error(s
->file
)) {
1669 migrate_set_state(s
, current_active_state
, MIGRATION_STATUS_FAILED
);
1670 trace_migration_thread_file_err();
1673 current_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1674 if (current_time
>= initial_time
+ BUFFER_DELAY
) {
1675 uint64_t transferred_bytes
= qemu_ftell(s
->file
) - initial_bytes
;
1676 uint64_t time_spent
= current_time
- initial_time
;
1677 double bandwidth
= (double)transferred_bytes
/ time_spent
;
1678 max_size
= bandwidth
* migrate_max_downtime() / 1000000;
1680 s
->mbps
= time_spent
? (((double) transferred_bytes
* 8.0) /
1681 ((double) time_spent
/ 1000.0)) / 1000.0 / 1000.0 : -1;
1683 trace_migrate_transferred(transferred_bytes
, time_spent
,
1684 bandwidth
, max_size
);
1685 /* if we haven't sent anything, we don't want to recalculate
1686 10000 is a small enough number for our purposes */
1687 if (s
->dirty_bytes_rate
&& transferred_bytes
> 10000) {
1688 s
->expected_downtime
= s
->dirty_bytes_rate
/ bandwidth
;
1691 qemu_file_reset_rate_limit(s
->file
);
1692 initial_time
= current_time
;
1693 initial_bytes
= qemu_ftell(s
->file
);
1695 if (qemu_file_rate_limit(s
->file
)) {
1696 /* usleep expects microseconds */
1697 g_usleep((initial_time
+ BUFFER_DELAY
- current_time
)*1000);
1701 trace_migration_thread_after_loop();
1702 /* If we enabled cpu throttling for auto-converge, turn it off. */
1703 cpu_throttle_stop();
1704 end_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1706 qemu_mutex_lock_iothread();
1707 qemu_savevm_state_cleanup();
1708 if (s
->state
== MIGRATION_STATUS_COMPLETED
) {
1709 uint64_t transferred_bytes
= qemu_ftell(s
->file
);
1710 s
->total_time
= end_time
- s
->total_time
;
1711 if (!entered_postcopy
) {
1712 s
->downtime
= end_time
- start_time
;
1714 if (s
->total_time
) {
1715 s
->mbps
= (((double) transferred_bytes
* 8.0) /
1716 ((double) s
->total_time
)) / 1000;
1718 runstate_set(RUN_STATE_POSTMIGRATE
);
1720 if (old_vm_running
&& !entered_postcopy
) {
1724 qemu_bh_schedule(s
->cleanup_bh
);
1725 qemu_mutex_unlock_iothread();
1727 rcu_unregister_thread();
1731 void migrate_fd_connect(MigrationState
*s
)
1733 /* This is a best 1st approximation. ns to ms */
1734 s
->expected_downtime
= max_downtime
/1000000;
1735 s
->cleanup_bh
= qemu_bh_new(migrate_fd_cleanup
, s
);
1737 qemu_file_set_rate_limit(s
->file
,
1738 s
->bandwidth_limit
/ XFER_LIMIT_RATIO
);
1740 /* Notify before starting migration thread */
1741 notifier_list_notify(&migration_state_notifiers
, s
);
1744 * Open the return path; currently for postcopy but other things might
1747 if (migrate_postcopy_ram()) {
1748 if (open_return_path_on_source(s
)) {
1749 error_report("Unable to open return-path for postcopy");
1750 migrate_set_state(s
, MIGRATION_STATUS_SETUP
,
1751 MIGRATION_STATUS_FAILED
);
1752 migrate_fd_cleanup(s
);
1757 migrate_compress_threads_create();
1758 qemu_thread_create(&s
->thread
, "migration", migration_thread
, s
,
1759 QEMU_THREAD_JOINABLE
);
1760 s
->migration_thread_running
= true;
1763 PostcopyState
postcopy_state_get(void)
1765 return atomic_mb_read(&incoming_postcopy_state
);
1768 /* Set the state and return the old state */
1769 PostcopyState
postcopy_state_set(PostcopyState new_state
)
1771 return atomic_xchg(&incoming_postcopy_state
, new_state
);