Postcopy+spice: Pass spice migration data earlier
[qemu/cris-port.git] / include / migration / migration.h
blob97622e4fd20c385beebabea52a1b9516ccd8736d
1 /*
2 * QEMU live migration
4 * Copyright IBM, Corp. 2008
6 * Authors:
7 * Anthony Liguori <aliguori@us.ibm.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
14 #ifndef QEMU_MIGRATION_H
15 #define QEMU_MIGRATION_H
17 #include "qapi/qmp/qdict.h"
18 #include "qemu-common.h"
19 #include "qemu/thread.h"
20 #include "qemu/notify.h"
21 #include "qapi/error.h"
22 #include "migration/vmstate.h"
23 #include "qapi-types.h"
24 #include "exec/cpu-common.h"
26 #define QEMU_VM_FILE_MAGIC 0x5145564d
27 #define QEMU_VM_FILE_VERSION_COMPAT 0x00000002
28 #define QEMU_VM_FILE_VERSION 0x00000003
30 #define QEMU_VM_EOF 0x00
31 #define QEMU_VM_SECTION_START 0x01
32 #define QEMU_VM_SECTION_PART 0x02
33 #define QEMU_VM_SECTION_END 0x03
34 #define QEMU_VM_SECTION_FULL 0x04
35 #define QEMU_VM_SUBSECTION 0x05
36 #define QEMU_VM_VMDESCRIPTION 0x06
37 #define QEMU_VM_CONFIGURATION 0x07
38 #define QEMU_VM_COMMAND 0x08
39 #define QEMU_VM_SECTION_FOOTER 0x7e
41 struct MigrationParams {
42 bool blk;
43 bool shared;
46 /* Messages sent on the return path from destination to source */
47 enum mig_rp_message_type {
48 MIG_RP_MSG_INVALID = 0, /* Must be 0 */
49 MIG_RP_MSG_SHUT, /* sibling will not send any more RP messages */
50 MIG_RP_MSG_PONG, /* Response to a PING; data (seq: be32 ) */
52 MIG_RP_MSG_REQ_PAGES_ID, /* data (start: be64, len: be32, id: string) */
53 MIG_RP_MSG_REQ_PAGES, /* data (start: be64, len: be32) */
55 MIG_RP_MSG_MAX
58 typedef QLIST_HEAD(, LoadStateEntry) LoadStateEntry_Head;
60 /* The current postcopy state is read/set by postcopy_state_get/set
61 * which update it atomically.
62 * The state is updated as postcopy messages are received, and
63 * in general only one thread should be writing to the state at any one
64 * time, initially the main thread and then the listen thread;
65 * Corner cases are where either thread finishes early and/or errors.
66 * The state is checked as messages are received to ensure that
67 * the source is sending us messages in the correct order.
68 * The state is also used by the RAM reception code to know if it
69 * has to place pages atomically, and the cleanup code at the end of
70 * the main thread to know if it has to delay cleanup until the end
71 * of postcopy.
73 typedef enum {
74 POSTCOPY_INCOMING_NONE = 0, /* Initial state - no postcopy */
75 POSTCOPY_INCOMING_ADVISE,
76 POSTCOPY_INCOMING_DISCARD,
77 POSTCOPY_INCOMING_LISTENING,
78 POSTCOPY_INCOMING_RUNNING,
79 POSTCOPY_INCOMING_END
80 } PostcopyState;
82 /* State for the incoming migration */
83 struct MigrationIncomingState {
84 QEMUFile *from_src_file;
87 * Free at the start of the main state load, set as the main thread finishes
88 * loading state.
90 QemuEvent main_thread_load_event;
92 bool have_fault_thread;
93 QemuThread fault_thread;
94 QemuSemaphore fault_thread_sem;
96 bool have_listen_thread;
97 QemuThread listen_thread;
98 QemuSemaphore listen_thread_sem;
100 /* For the kernel to send us notifications */
101 int userfault_fd;
102 /* To tell the fault_thread to quit */
103 int userfault_quit_fd;
104 QEMUFile *to_src_file;
105 QemuMutex rp_mutex; /* We send replies from multiple threads */
106 void *postcopy_tmp_page;
108 int state;
109 /* See savevm.c */
110 LoadStateEntry_Head loadvm_handlers;
113 MigrationIncomingState *migration_incoming_get_current(void);
114 MigrationIncomingState *migration_incoming_state_new(QEMUFile *f);
115 void migration_incoming_state_destroy(void);
118 * An outstanding page request, on the source, having been received
119 * and queued
121 struct MigrationSrcPageRequest {
122 RAMBlock *rb;
123 hwaddr offset;
124 hwaddr len;
126 QSIMPLEQ_ENTRY(MigrationSrcPageRequest) next_req;
129 struct MigrationState
131 int64_t bandwidth_limit;
132 size_t bytes_xfer;
133 size_t xfer_limit;
134 QemuThread thread;
135 QEMUBH *cleanup_bh;
136 QEMUFile *to_dst_file;
137 int parameters[MIGRATION_PARAMETER__MAX];
139 int state;
140 MigrationParams params;
142 /* State related to return path */
143 struct {
144 QEMUFile *from_dst_file;
145 QemuThread rp_thread;
146 bool error;
147 } rp_state;
149 double mbps;
150 int64_t total_time;
151 int64_t downtime;
152 int64_t expected_downtime;
153 int64_t dirty_pages_rate;
154 int64_t dirty_bytes_rate;
155 bool enabled_capabilities[MIGRATION_CAPABILITY__MAX];
156 int64_t xbzrle_cache_size;
157 int64_t setup_time;
158 int64_t dirty_sync_count;
160 /* Flag set once the migration has been asked to enter postcopy */
161 bool start_postcopy;
162 /* Flag set after postcopy has sent the device state */
163 bool postcopy_after_devices;
165 /* Flag set once the migration thread is running (and needs joining) */
166 bool migration_thread_running;
168 /* Queue of outstanding page requests from the destination */
169 QemuMutex src_page_req_mutex;
170 QSIMPLEQ_HEAD(src_page_requests, MigrationSrcPageRequest) src_page_requests;
171 /* The RAMBlock used in the last src_page_request */
172 RAMBlock *last_req_rb;
175 void migrate_set_state(int *state, int old_state, int new_state);
177 void process_incoming_migration(QEMUFile *f);
179 void qemu_start_incoming_migration(const char *uri, Error **errp);
181 uint64_t migrate_max_downtime(void);
183 void exec_start_incoming_migration(const char *host_port, Error **errp);
185 void exec_start_outgoing_migration(MigrationState *s, const char *host_port, Error **errp);
187 void tcp_start_incoming_migration(const char *host_port, Error **errp);
189 void tcp_start_outgoing_migration(MigrationState *s, const char *host_port, Error **errp);
191 void unix_start_incoming_migration(const char *path, Error **errp);
193 void unix_start_outgoing_migration(MigrationState *s, const char *path, Error **errp);
195 void fd_start_incoming_migration(const char *path, Error **errp);
197 void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error **errp);
199 void rdma_start_outgoing_migration(void *opaque, const char *host_port, Error **errp);
201 void rdma_start_incoming_migration(const char *host_port, Error **errp);
203 void migrate_fd_error(MigrationState *s);
205 void migrate_fd_connect(MigrationState *s);
207 int migrate_fd_close(MigrationState *s);
209 void add_migration_state_change_notifier(Notifier *notify);
210 void remove_migration_state_change_notifier(Notifier *notify);
211 MigrationState *migrate_init(const MigrationParams *params);
212 bool migration_in_setup(MigrationState *);
213 bool migration_has_finished(MigrationState *);
214 bool migration_has_failed(MigrationState *);
215 /* True if outgoing migration has entered postcopy phase */
216 bool migration_in_postcopy(MigrationState *);
217 /* ...and after the device transmission */
218 bool migration_in_postcopy_after_devices(MigrationState *);
219 MigrationState *migrate_get_current(void);
221 void migrate_compress_threads_create(void);
222 void migrate_compress_threads_join(void);
223 void migrate_decompress_threads_create(void);
224 void migrate_decompress_threads_join(void);
225 uint64_t ram_bytes_remaining(void);
226 uint64_t ram_bytes_transferred(void);
227 uint64_t ram_bytes_total(void);
228 void free_xbzrle_decoded_buf(void);
230 void acct_update_position(QEMUFile *f, size_t size, bool zero);
232 uint64_t dup_mig_bytes_transferred(void);
233 uint64_t dup_mig_pages_transferred(void);
234 uint64_t skipped_mig_bytes_transferred(void);
235 uint64_t skipped_mig_pages_transferred(void);
236 uint64_t norm_mig_bytes_transferred(void);
237 uint64_t norm_mig_pages_transferred(void);
238 uint64_t xbzrle_mig_bytes_transferred(void);
239 uint64_t xbzrle_mig_pages_transferred(void);
240 uint64_t xbzrle_mig_pages_overflow(void);
241 uint64_t xbzrle_mig_pages_cache_miss(void);
242 double xbzrle_mig_cache_miss_rate(void);
244 void ram_handle_compressed(void *host, uint8_t ch, uint64_t size);
245 void ram_debug_dump_bitmap(unsigned long *todump, bool expected);
246 /* For outgoing discard bitmap */
247 int ram_postcopy_send_discard_bitmap(MigrationState *ms);
248 /* For incoming postcopy discard */
249 int ram_discard_range(MigrationIncomingState *mis, const char *block_name,
250 uint64_t start, size_t length);
251 int ram_postcopy_incoming_init(MigrationIncomingState *mis);
254 * @migrate_add_blocker - prevent migration from proceeding
256 * @reason - an error to be returned whenever migration is attempted
258 void migrate_add_blocker(Error *reason);
261 * @migrate_del_blocker - remove a blocking error from migration
263 * @reason - the error blocking migration
265 void migrate_del_blocker(Error *reason);
267 bool migrate_postcopy_ram(void);
268 bool migrate_zero_blocks(void);
270 bool migrate_auto_converge(void);
272 int xbzrle_encode_buffer(uint8_t *old_buf, uint8_t *new_buf, int slen,
273 uint8_t *dst, int dlen);
274 int xbzrle_decode_buffer(uint8_t *src, int slen, uint8_t *dst, int dlen);
276 int migrate_use_xbzrle(void);
277 int64_t migrate_xbzrle_cache_size(void);
279 int64_t xbzrle_cache_resize(int64_t new_size);
281 bool migrate_use_compression(void);
282 int migrate_compress_level(void);
283 int migrate_compress_threads(void);
284 int migrate_decompress_threads(void);
285 bool migrate_use_events(void);
287 /* Sending on the return path - generic and then for each message type */
288 void migrate_send_rp_message(MigrationIncomingState *mis,
289 enum mig_rp_message_type message_type,
290 uint16_t len, void *data);
291 void migrate_send_rp_shut(MigrationIncomingState *mis,
292 uint32_t value);
293 void migrate_send_rp_pong(MigrationIncomingState *mis,
294 uint32_t value);
295 void migrate_send_rp_req_pages(MigrationIncomingState *mis, const char* rbname,
296 ram_addr_t start, size_t len);
298 void ram_control_before_iterate(QEMUFile *f, uint64_t flags);
299 void ram_control_after_iterate(QEMUFile *f, uint64_t flags);
300 void ram_control_load_hook(QEMUFile *f, uint64_t flags, void *data);
302 /* Whenever this is found in the data stream, the flags
303 * will be passed to ram_control_load_hook in the incoming-migration
304 * side. This lets before_ram_iterate/after_ram_iterate add
305 * transport-specific sections to the RAM migration data.
307 #define RAM_SAVE_FLAG_HOOK 0x80
309 #define RAM_SAVE_CONTROL_NOT_SUPP -1000
310 #define RAM_SAVE_CONTROL_DELAYED -2000
312 size_t ram_control_save_page(QEMUFile *f, ram_addr_t block_offset,
313 ram_addr_t offset, size_t size,
314 uint64_t *bytes_sent);
316 void ram_mig_init(void);
317 void savevm_skip_section_footers(void);
318 void register_global_state(void);
319 void global_state_set_optional(void);
320 void savevm_skip_configuration(void);
321 int global_state_store(void);
322 void global_state_store_running(void);
324 void flush_page_queue(MigrationState *ms);
325 int ram_save_queue_pages(MigrationState *ms, const char *rbname,
326 ram_addr_t start, ram_addr_t len);
328 PostcopyState postcopy_state_get(void);
329 /* Set the state and return the old state */
330 PostcopyState postcopy_state_set(PostcopyState new_state);
331 #endif