hw/apb_pci.c

   1 /*
   2  * QEMU Ultrasparc APB PCI host
   3  *
   4  * Copyright (c) 2006 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 /* XXX This file and most of its contents are somewhat misnamed.  The
  26    Ultrasparc PCI host is called the PCI Bus Module (PBM).  The APB is
  27    the secondary PCI bridge.  */
  28
  29 #include "sysbus.h"
  30 #include "pci.h"
  31
  32 /* debug APB */
  33 //#define DEBUG_APB
  34
  35 #ifdef DEBUG_APB
  36 #define APB_DPRINTF(fmt, ...) \
  37 do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
  38 #else
  39 #define APB_DPRINTF(fmt, ...)
  40 #endif
  41
  42 typedef target_phys_addr_t pci_addr_t;
  43 #include "pci_host.h"
  44
  45 typedef struct APBState {
  46     SysBusDevice busdev;
  47     PCIHostState host_state;
  48 } APBState;
  49
  50 static void pci_apb_config_writel (void *opaque, target_phys_addr_t addr,
  51                                          uint32_t val)
  52 {
  53     APBState *s = opaque;
  54
  55 #ifdef TARGET_WORDS_BIGENDIAN
  56     val = bswap32(val);
  57 #endif
  58     APB_DPRINTF("config_writel addr " TARGET_FMT_plx " val %x\n", addr,
  59                 val);
  60     s->host_state.config_reg = val;
  61 }
  62
  63 static uint32_t pci_apb_config_readl (void *opaque,
  64                                             target_phys_addr_t addr)
  65 {
  66     APBState *s = opaque;
  67     uint32_t val;
  68
  69     val = s->host_state.config_reg;
  70 #ifdef TARGET_WORDS_BIGENDIAN
  71     val = bswap32(val);
  72 #endif
  73     APB_DPRINTF("config_readl addr " TARGET_FMT_plx " val %x\n", addr,
  74                 val);
  75     return val;
  76 }
  77
  78 static CPUWriteMemoryFunc * const pci_apb_config_write[] = {
  79     &pci_apb_config_writel,
  80     &pci_apb_config_writel,
  81     &pci_apb_config_writel,
  82 };
  83
  84 static CPUReadMemoryFunc * const pci_apb_config_read[] = {
  85     &pci_apb_config_readl,
  86     &pci_apb_config_readl,
  87     &pci_apb_config_readl,
  88 };
  89
  90 static void apb_config_writel (void *opaque, target_phys_addr_t addr,
  91                                uint32_t val)
  92 {
  93     //PCIBus *s = opaque;
  94
  95     switch (addr & 0x3f) {
  96     case 0x00: // Control/Status
  97     case 0x10: // AFSR
  98     case 0x18: // AFAR
  99     case 0x20: // Diagnostic
 100     case 0x28: // Target address space
 101         // XXX
 102     default:
 103         break;
 104     }
 105 }
 106
 107 static uint32_t apb_config_readl (void *opaque,
 108                                   target_phys_addr_t addr)
 109 {
 110     //PCIBus *s = opaque;
 111     uint32_t val;
 112
 113     switch (addr & 0x3f) {
 114     case 0x00: // Control/Status
 115     case 0x10: // AFSR
 116     case 0x18: // AFAR
 117     case 0x20: // Diagnostic
 118     case 0x28: // Target address space
 119         // XXX
 120     default:
 121         val = 0;
 122         break;
 123     }
 124     return val;
 125 }
 126
 127 static CPUWriteMemoryFunc * const apb_config_write[] = {
 128     &apb_config_writel,
 129     &apb_config_writel,
 130     &apb_config_writel,
 131 };
 132
 133 static CPUReadMemoryFunc * const apb_config_read[] = {
 134     &apb_config_readl,
 135     &apb_config_readl,
 136     &apb_config_readl,
 137 };
 138
 139 static CPUWriteMemoryFunc * const pci_apb_write[] = {
 140     &pci_host_data_writeb,
 141     &pci_host_data_writew,
 142     &pci_host_data_writel,
 143 };
 144
 145 static CPUReadMemoryFunc * const pci_apb_read[] = {
 146     &pci_host_data_readb,
 147     &pci_host_data_readw,
 148     &pci_host_data_readl,
 149 };
 150
 151 static void pci_apb_iowriteb (void *opaque, target_phys_addr_t addr,
 152                                   uint32_t val)
 153 {
 154     cpu_outb(NULL, addr & IOPORTS_MASK, val);
 155 }
 156
 157 static void pci_apb_iowritew (void *opaque, target_phys_addr_t addr,
 158                                   uint32_t val)
 159 {
 160     cpu_outw(NULL, addr & IOPORTS_MASK, val);
 161 }
 162
 163 static void pci_apb_iowritel (void *opaque, target_phys_addr_t addr,
 164                                 uint32_t val)
 165 {
 166     cpu_outl(NULL, addr & IOPORTS_MASK, val);
 167 }
 168
 169 static uint32_t pci_apb_ioreadb (void *opaque, target_phys_addr_t addr)
 170 {
 171     uint32_t val;
 172
 173     val = cpu_inb(NULL, addr & IOPORTS_MASK);
 174     return val;
 175 }
 176
 177 static uint32_t pci_apb_ioreadw (void *opaque, target_phys_addr_t addr)
 178 {
 179     uint32_t val;
 180
 181     val = cpu_inw(NULL, addr & IOPORTS_MASK);
 182     return val;
 183 }
 184
 185 static uint32_t pci_apb_ioreadl (void *opaque, target_phys_addr_t addr)
 186 {
 187     uint32_t val;
 188
 189     val = cpu_inl(NULL, addr & IOPORTS_MASK);
 190     return val;
 191 }
 192
 193 static CPUWriteMemoryFunc * const pci_apb_iowrite[] = {
 194     &pci_apb_iowriteb,
 195     &pci_apb_iowritew,
 196     &pci_apb_iowritel,
 197 };
 198
 199 static CPUReadMemoryFunc * const pci_apb_ioread[] = {
 200     &pci_apb_ioreadb,
 201     &pci_apb_ioreadw,
 202     &pci_apb_ioreadl,
 203 };
 204
 205 /* The APB host has an IRQ line for each IRQ line of each slot.  */
 206 static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num)
 207 {
 208     return ((pci_dev->devfn & 0x18) >> 1) + irq_num;
 209 }
 210
 211 static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num)
 212 {
 213     int bus_offset;
 214     if (pci_dev->devfn & 1)
 215         bus_offset = 16;
 216     else
 217         bus_offset = 0;
 218     return bus_offset + irq_num;
 219 }
 220
 221 static void pci_apb_set_irq(qemu_irq *pic, int irq_num, int level)
 222 {
 223     /* PCI IRQ map onto the first 32 INO.  */
 224     qemu_set_irq(pic[irq_num], level);
 225 }
 226
 227 PCIBus *pci_apb_init(target_phys_addr_t special_base,
 228                      target_phys_addr_t mem_base,
 229                      qemu_irq *pic, PCIBus **bus2, PCIBus **bus3)
 230 {
 231     DeviceState *dev;
 232     SysBusDevice *s;
 233     APBState *d;
 234
 235     /* Ultrasparc PBM main bus */
 236     dev = qdev_create(NULL, "pbm");
 237     qdev_init(dev);
 238     s = sysbus_from_qdev(dev);
 239     /* apb_config */
 240     sysbus_mmio_map(s, 0, special_base + 0x2000ULL);
 241     /* pci_ioport */
 242     sysbus_mmio_map(s, 1, special_base + 0x2000000ULL);
 243     /* mem_config: XXX size should be 4G-prom */
 244     sysbus_mmio_map(s, 2, special_base + 0x1000000ULL);
 245     /* mem_data */
 246     sysbus_mmio_map(s, 3, mem_base);
 247     d = FROM_SYSBUS(APBState, s);
 248     d->host_state.bus = pci_register_bus(NULL, "pci",
 249                                          pci_apb_set_irq, pci_pbm_map_irq, pic,
 250                                          0, 32);
 251     pci_create_simple(d->host_state.bus, 0, "pbm");
 252     /* APB secondary busses */
 253     *bus2 = pci_bridge_init(d->host_state.bus, 8, PCI_VENDOR_ID_SUN,
 254                             PCI_DEVICE_ID_SUN_SIMBA, pci_apb_map_irq,
 255                             "Advanced PCI Bus secondary bridge 1");
 256     *bus3 = pci_bridge_init(d->host_state.bus, 9, PCI_VENDOR_ID_SUN,
 257                             PCI_DEVICE_ID_SUN_SIMBA, pci_apb_map_irq,
 258                             "Advanced PCI Bus secondary bridge 2");
 259
 260     return d->host_state.bus;
 261 }
 262
 263 static void pci_pbm_init_device(SysBusDevice *dev)
 264 {
 265
 266     APBState *s;
 267     int pci_mem_config, pci_mem_data, apb_config, pci_ioport;
 268
 269     s = FROM_SYSBUS(APBState, dev);
 270     /* apb_config */
 271     apb_config = cpu_register_io_memory(apb_config_read,
 272                                         apb_config_write, s);
 273     sysbus_init_mmio(dev, 0x40ULL, apb_config);
 274     /* pci_ioport */
 275     pci_ioport = cpu_register_io_memory(pci_apb_ioread,
 276                                           pci_apb_iowrite, s);
 277     sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
 278     /* mem_config  */
 279     pci_mem_config = cpu_register_io_memory(pci_apb_config_read,
 280                                             pci_apb_config_write, s);
 281     sysbus_init_mmio(dev, 0x10ULL, pci_mem_config);
 282     /* mem_data */
 283     pci_mem_data = cpu_register_io_memory(pci_apb_read,
 284                                           pci_apb_write, &s->host_state);
 285     sysbus_init_mmio(dev, 0x10000000ULL, pci_mem_data);
 286 }
 287
 288 static void pbm_pci_host_init(PCIDevice *d)
 289 {
 290     pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_SUN);
 291     pci_config_set_device_id(d->config, PCI_DEVICE_ID_SUN_SABRE);
 292     d->config[0x04] = 0x06; // command = bus master, pci mem
 293     d->config[0x05] = 0x00;
 294     d->config[0x06] = 0xa0; // status = fast back-to-back, 66MHz, no error
 295     d->config[0x07] = 0x03; // status = medium devsel
 296     d->config[0x08] = 0x00; // revision
 297     d->config[0x09] = 0x00; // programming i/f
 298     pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
 299     d->config[0x0D] = 0x10; // latency_timer
 300     d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
 301 }
 302
 303 static PCIDeviceInfo pbm_pci_host_info = {
 304     .qdev.name = "pbm",
 305     .qdev.size = sizeof(PCIDevice),
 306     .init      = pbm_pci_host_init,
 307 };
 308
 309 static void pbm_register_devices(void)
 310 {
 311     sysbus_register_dev("pbm", sizeof(APBState), pci_pbm_init_device);
 312     pci_qdev_register(&pbm_pci_host_info);
 313 }
 314
 315 device_init(pbm_register_devices)