Add qemu_savevm_state_complete_postcopy
[qemu/cris-port.git] / qga / main.c
blobd2a0ffc807f1ddf7de9f5d44f7c1697a8fed5a52
1 /*
2 * QEMU Guest Agent
4 * Copyright IBM Corp. 2011
6 * Authors:
7 * Adam Litke <aglitke@linux.vnet.ibm.com>
8 * Michael Roth <mdroth@linux.vnet.ibm.com>
10 * This work is licensed under the terms of the GNU GPL, version 2 or later.
11 * See the COPYING file in the top-level directory.
13 #include <stdlib.h>
14 #include <stdio.h>
15 #include <stdbool.h>
16 #include <glib.h>
17 #include <getopt.h>
18 #include <glib/gstdio.h>
19 #ifndef _WIN32
20 #include <syslog.h>
21 #include <sys/wait.h>
22 #include <sys/stat.h>
23 #endif
24 #include "qapi/qmp/json-streamer.h"
25 #include "qapi/qmp/json-parser.h"
26 #include "qapi/qmp/qint.h"
27 #include "qapi/qmp/qjson.h"
28 #include "qga/guest-agent-core.h"
29 #include "qemu/module.h"
30 #include "signal.h"
31 #include "qapi/qmp/qerror.h"
32 #include "qapi/qmp/dispatch.h"
33 #include "qga/channel.h"
34 #include "qemu/bswap.h"
35 #ifdef _WIN32
36 #include "qga/service-win32.h"
37 #include "qga/vss-win32.h"
38 #endif
39 #ifdef __linux__
40 #include <linux/fs.h>
41 #ifdef FIFREEZE
42 #define CONFIG_FSFREEZE
43 #endif
44 #endif
46 #ifndef _WIN32
47 #define QGA_VIRTIO_PATH_DEFAULT "/dev/virtio-ports/org.qemu.guest_agent.0"
48 #define QGA_STATE_RELATIVE_DIR "run"
49 #define QGA_SERIAL_PATH_DEFAULT "/dev/ttyS0"
50 #else
51 #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0"
52 #define QGA_STATE_RELATIVE_DIR "qemu-ga"
53 #define QGA_SERIAL_PATH_DEFAULT "COM1"
54 #endif
55 #ifdef CONFIG_FSFREEZE
56 #define QGA_FSFREEZE_HOOK_DEFAULT CONFIG_QEMU_CONFDIR "/fsfreeze-hook"
57 #endif
58 #define QGA_SENTINEL_BYTE 0xFF
59 #define QGA_CONF_DEFAULT CONFIG_QEMU_CONFDIR G_DIR_SEPARATOR_S "qemu-ga.conf"
61 static struct {
62 const char *state_dir;
63 const char *pidfile;
64 } dfl_pathnames;
66 typedef struct GAPersistentState {
67 #define QGA_PSTATE_DEFAULT_FD_COUNTER 1000
68 int64_t fd_counter;
69 } GAPersistentState;
71 struct GAState {
72 JSONMessageParser parser;
73 GMainLoop *main_loop;
74 GAChannel *channel;
75 bool virtio; /* fastpath to check for virtio to deal with poll() quirks */
76 GACommandState *command_state;
77 GLogLevelFlags log_level;
78 FILE *log_file;
79 bool logging_enabled;
80 #ifdef _WIN32
81 GAService service;
82 #endif
83 bool delimit_response;
84 bool frozen;
85 GList *blacklist;
86 char *state_filepath_isfrozen;
87 struct {
88 const char *log_filepath;
89 const char *pid_filepath;
90 } deferred_options;
91 #ifdef CONFIG_FSFREEZE
92 const char *fsfreeze_hook;
93 #endif
94 gchar *pstate_filepath;
95 GAPersistentState pstate;
98 struct GAState *ga_state;
100 /* commands that are safe to issue while filesystems are frozen */
101 static const char *ga_freeze_whitelist[] = {
102 "guest-ping",
103 "guest-info",
104 "guest-sync",
105 "guest-sync-delimited",
106 "guest-fsfreeze-status",
107 "guest-fsfreeze-thaw",
108 NULL
111 #ifdef _WIN32
112 DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data,
113 LPVOID ctx);
114 VOID WINAPI service_main(DWORD argc, TCHAR *argv[]);
115 #endif
117 static void
118 init_dfl_pathnames(void)
120 g_assert(dfl_pathnames.state_dir == NULL);
121 g_assert(dfl_pathnames.pidfile == NULL);
122 dfl_pathnames.state_dir = qemu_get_local_state_pathname(
123 QGA_STATE_RELATIVE_DIR);
124 dfl_pathnames.pidfile = qemu_get_local_state_pathname(
125 QGA_STATE_RELATIVE_DIR G_DIR_SEPARATOR_S "qemu-ga.pid");
128 static void quit_handler(int sig)
130 /* if we're frozen, don't exit unless we're absolutely forced to,
131 * because it's basically impossible for graceful exit to complete
132 * unless all log/pid files are on unfreezable filesystems. there's
133 * also a very likely chance killing the agent before unfreezing
134 * the filesystems is a mistake (or will be viewed as one later).
136 if (ga_is_frozen(ga_state)) {
137 return;
139 g_debug("received signal num %d, quitting", sig);
141 if (g_main_loop_is_running(ga_state->main_loop)) {
142 g_main_loop_quit(ga_state->main_loop);
146 #ifndef _WIN32
147 static gboolean register_signal_handlers(void)
149 struct sigaction sigact;
150 int ret;
152 memset(&sigact, 0, sizeof(struct sigaction));
153 sigact.sa_handler = quit_handler;
155 ret = sigaction(SIGINT, &sigact, NULL);
156 if (ret == -1) {
157 g_error("error configuring signal handler: %s", strerror(errno));
159 ret = sigaction(SIGTERM, &sigact, NULL);
160 if (ret == -1) {
161 g_error("error configuring signal handler: %s", strerror(errno));
164 sigact.sa_handler = SIG_IGN;
165 if (sigaction(SIGPIPE, &sigact, NULL) != 0) {
166 g_error("error configuring SIGPIPE signal handler: %s",
167 strerror(errno));
170 return true;
173 /* TODO: use this in place of all post-fork() fclose(std*) callers */
174 void reopen_fd_to_null(int fd)
176 int nullfd;
178 nullfd = open("/dev/null", O_RDWR);
179 if (nullfd < 0) {
180 return;
183 dup2(nullfd, fd);
185 if (nullfd != fd) {
186 close(nullfd);
189 #endif
191 static void usage(const char *cmd)
193 printf(
194 "Usage: %s [-m <method> -p <path>] [<options>]\n"
195 "QEMU Guest Agent %s\n"
196 "\n"
197 " -m, --method transport method: one of unix-listen, virtio-serial, or\n"
198 " isa-serial (virtio-serial is the default)\n"
199 " -p, --path device/socket path (the default for virtio-serial is:\n"
200 " %s,\n"
201 " the default for isa-serial is:\n"
202 " %s)\n"
203 " -l, --logfile set logfile path, logs to stderr by default\n"
204 " -f, --pidfile specify pidfile (default is %s)\n"
205 #ifdef CONFIG_FSFREEZE
206 " -F, --fsfreeze-hook\n"
207 " enable fsfreeze hook. Accepts an optional argument that\n"
208 " specifies script to run on freeze/thaw. Script will be\n"
209 " called with 'freeze'/'thaw' arguments accordingly.\n"
210 " (default is %s)\n"
211 " If using -F with an argument, do not follow -F with a\n"
212 " space.\n"
213 " (for example: -F/var/run/fsfreezehook.sh)\n"
214 #endif
215 " -t, --statedir specify dir to store state information (absolute paths\n"
216 " only, default is %s)\n"
217 " -v, --verbose log extra debugging information\n"
218 " -V, --version print version information and exit\n"
219 " -d, --daemonize become a daemon\n"
220 #ifdef _WIN32
221 " -s, --service service commands: install, uninstall, vss-install, vss-uninstall\n"
222 #endif
223 " -b, --blacklist comma-separated list of RPCs to disable (no spaces, \"?\"\n"
224 " to list available RPCs)\n"
225 " -D, --dump-conf dump a qemu-ga config file based on current config\n"
226 " options / command-line parameters to stdout\n"
227 " -h, --help display this help and exit\n"
228 "\n"
229 "Report bugs to <mdroth@linux.vnet.ibm.com>\n"
230 , cmd, QEMU_VERSION, QGA_VIRTIO_PATH_DEFAULT, QGA_SERIAL_PATH_DEFAULT,
231 dfl_pathnames.pidfile,
232 #ifdef CONFIG_FSFREEZE
233 QGA_FSFREEZE_HOOK_DEFAULT,
234 #endif
235 dfl_pathnames.state_dir);
238 static const char *ga_log_level_str(GLogLevelFlags level)
240 switch (level & G_LOG_LEVEL_MASK) {
241 case G_LOG_LEVEL_ERROR:
242 return "error";
243 case G_LOG_LEVEL_CRITICAL:
244 return "critical";
245 case G_LOG_LEVEL_WARNING:
246 return "warning";
247 case G_LOG_LEVEL_MESSAGE:
248 return "message";
249 case G_LOG_LEVEL_INFO:
250 return "info";
251 case G_LOG_LEVEL_DEBUG:
252 return "debug";
253 default:
254 return "user";
258 bool ga_logging_enabled(GAState *s)
260 return s->logging_enabled;
263 void ga_disable_logging(GAState *s)
265 s->logging_enabled = false;
268 void ga_enable_logging(GAState *s)
270 s->logging_enabled = true;
273 static void ga_log(const gchar *domain, GLogLevelFlags level,
274 const gchar *msg, gpointer opaque)
276 GAState *s = opaque;
277 GTimeVal time;
278 const char *level_str = ga_log_level_str(level);
280 if (!ga_logging_enabled(s)) {
281 return;
284 level &= G_LOG_LEVEL_MASK;
285 #ifndef _WIN32
286 if (g_strcmp0(domain, "syslog") == 0) {
287 syslog(LOG_INFO, "%s: %s", level_str, msg);
288 } else if (level & s->log_level) {
289 #else
290 if (level & s->log_level) {
291 #endif
292 g_get_current_time(&time);
293 fprintf(s->log_file,
294 "%lu.%lu: %s: %s\n", time.tv_sec, time.tv_usec, level_str, msg);
295 fflush(s->log_file);
299 void ga_set_response_delimited(GAState *s)
301 s->delimit_response = true;
304 static FILE *ga_open_logfile(const char *logfile)
306 FILE *f;
308 f = fopen(logfile, "a");
309 if (!f) {
310 return NULL;
313 qemu_set_cloexec(fileno(f));
314 return f;
317 #ifndef _WIN32
318 static bool ga_open_pidfile(const char *pidfile)
320 int pidfd;
321 char pidstr[32];
323 pidfd = qemu_open(pidfile, O_CREAT|O_WRONLY, S_IRUSR|S_IWUSR);
324 if (pidfd == -1 || lockf(pidfd, F_TLOCK, 0)) {
325 g_critical("Cannot lock pid file, %s", strerror(errno));
326 if (pidfd != -1) {
327 close(pidfd);
329 return false;
332 if (ftruncate(pidfd, 0)) {
333 g_critical("Failed to truncate pid file");
334 goto fail;
336 snprintf(pidstr, sizeof(pidstr), "%d\n", getpid());
337 if (write(pidfd, pidstr, strlen(pidstr)) != strlen(pidstr)) {
338 g_critical("Failed to write pid file");
339 goto fail;
342 /* keep pidfile open & locked forever */
343 return true;
345 fail:
346 unlink(pidfile);
347 close(pidfd);
348 return false;
350 #else /* _WIN32 */
351 static bool ga_open_pidfile(const char *pidfile)
353 return true;
355 #endif
357 static gint ga_strcmp(gconstpointer str1, gconstpointer str2)
359 return strcmp(str1, str2);
362 /* disable commands that aren't safe for fsfreeze */
363 static void ga_disable_non_whitelisted(QmpCommand *cmd, void *opaque)
365 bool whitelisted = false;
366 int i = 0;
367 const char *name = qmp_command_name(cmd);
369 while (ga_freeze_whitelist[i] != NULL) {
370 if (strcmp(name, ga_freeze_whitelist[i]) == 0) {
371 whitelisted = true;
373 i++;
375 if (!whitelisted) {
376 g_debug("disabling command: %s", name);
377 qmp_disable_command(name);
381 /* [re-]enable all commands, except those explicitly blacklisted by user */
382 static void ga_enable_non_blacklisted(QmpCommand *cmd, void *opaque)
384 GList *blacklist = opaque;
385 const char *name = qmp_command_name(cmd);
387 if (g_list_find_custom(blacklist, name, ga_strcmp) == NULL &&
388 !qmp_command_is_enabled(cmd)) {
389 g_debug("enabling command: %s", name);
390 qmp_enable_command(name);
394 static bool ga_create_file(const char *path)
396 int fd = open(path, O_CREAT | O_WRONLY, S_IWUSR | S_IRUSR);
397 if (fd == -1) {
398 g_warning("unable to open/create file %s: %s", path, strerror(errno));
399 return false;
401 close(fd);
402 return true;
405 static bool ga_delete_file(const char *path)
407 int ret = unlink(path);
408 if (ret == -1) {
409 g_warning("unable to delete file: %s: %s", path, strerror(errno));
410 return false;
413 return true;
416 bool ga_is_frozen(GAState *s)
418 return s->frozen;
421 void ga_set_frozen(GAState *s)
423 if (ga_is_frozen(s)) {
424 return;
426 /* disable all non-whitelisted (for frozen state) commands */
427 qmp_for_each_command(ga_disable_non_whitelisted, NULL);
428 g_warning("disabling logging due to filesystem freeze");
429 ga_disable_logging(s);
430 s->frozen = true;
431 if (!ga_create_file(s->state_filepath_isfrozen)) {
432 g_warning("unable to create %s, fsfreeze may not function properly",
433 s->state_filepath_isfrozen);
437 void ga_unset_frozen(GAState *s)
439 if (!ga_is_frozen(s)) {
440 return;
443 /* if we delayed creation/opening of pid/log files due to being
444 * in a frozen state at start up, do it now
446 if (s->deferred_options.log_filepath) {
447 s->log_file = ga_open_logfile(s->deferred_options.log_filepath);
448 if (!s->log_file) {
449 s->log_file = stderr;
451 s->deferred_options.log_filepath = NULL;
453 ga_enable_logging(s);
454 g_warning("logging re-enabled due to filesystem unfreeze");
455 if (s->deferred_options.pid_filepath) {
456 if (!ga_open_pidfile(s->deferred_options.pid_filepath)) {
457 g_warning("failed to create/open pid file");
459 s->deferred_options.pid_filepath = NULL;
462 /* enable all disabled, non-blacklisted commands */
463 qmp_for_each_command(ga_enable_non_blacklisted, s->blacklist);
464 s->frozen = false;
465 if (!ga_delete_file(s->state_filepath_isfrozen)) {
466 g_warning("unable to delete %s, fsfreeze may not function properly",
467 s->state_filepath_isfrozen);
471 #ifdef CONFIG_FSFREEZE
472 const char *ga_fsfreeze_hook(GAState *s)
474 return s->fsfreeze_hook;
476 #endif
478 static void become_daemon(const char *pidfile)
480 #ifndef _WIN32
481 pid_t pid, sid;
483 pid = fork();
484 if (pid < 0) {
485 exit(EXIT_FAILURE);
487 if (pid > 0) {
488 exit(EXIT_SUCCESS);
491 if (pidfile) {
492 if (!ga_open_pidfile(pidfile)) {
493 g_critical("failed to create pidfile");
494 exit(EXIT_FAILURE);
498 umask(S_IRWXG | S_IRWXO);
499 sid = setsid();
500 if (sid < 0) {
501 goto fail;
503 if ((chdir("/")) < 0) {
504 goto fail;
507 reopen_fd_to_null(STDIN_FILENO);
508 reopen_fd_to_null(STDOUT_FILENO);
509 reopen_fd_to_null(STDERR_FILENO);
510 return;
512 fail:
513 if (pidfile) {
514 unlink(pidfile);
516 g_critical("failed to daemonize");
517 exit(EXIT_FAILURE);
518 #endif
521 static int send_response(GAState *s, QObject *payload)
523 const char *buf;
524 QString *payload_qstr, *response_qstr;
525 GIOStatus status;
527 g_assert(payload && s->channel);
529 payload_qstr = qobject_to_json(payload);
530 if (!payload_qstr) {
531 return -EINVAL;
534 if (s->delimit_response) {
535 s->delimit_response = false;
536 response_qstr = qstring_new();
537 qstring_append_chr(response_qstr, QGA_SENTINEL_BYTE);
538 qstring_append(response_qstr, qstring_get_str(payload_qstr));
539 QDECREF(payload_qstr);
540 } else {
541 response_qstr = payload_qstr;
544 qstring_append_chr(response_qstr, '\n');
545 buf = qstring_get_str(response_qstr);
546 status = ga_channel_write_all(s->channel, buf, strlen(buf));
547 QDECREF(response_qstr);
548 if (status != G_IO_STATUS_NORMAL) {
549 return -EIO;
552 return 0;
555 static void process_command(GAState *s, QDict *req)
557 QObject *rsp = NULL;
558 int ret;
560 g_assert(req);
561 g_debug("processing command");
562 rsp = qmp_dispatch(QOBJECT(req));
563 if (rsp) {
564 ret = send_response(s, rsp);
565 if (ret) {
566 g_warning("error sending response: %s", strerror(ret));
568 qobject_decref(rsp);
572 /* handle requests/control events coming in over the channel */
573 static void process_event(JSONMessageParser *parser, QList *tokens)
575 GAState *s = container_of(parser, GAState, parser);
576 QDict *qdict;
577 Error *err = NULL;
578 int ret;
580 g_assert(s && parser);
582 g_debug("process_event: called");
583 qdict = qobject_to_qdict(json_parser_parse_err(tokens, NULL, &err));
584 if (err || !qdict) {
585 QDECREF(qdict);
586 qdict = qdict_new();
587 if (!err) {
588 g_warning("failed to parse event: unknown error");
589 error_setg(&err, QERR_JSON_PARSING);
590 } else {
591 g_warning("failed to parse event: %s", error_get_pretty(err));
593 qdict_put_obj(qdict, "error", qmp_build_error_object(err));
594 error_free(err);
597 /* handle host->guest commands */
598 if (qdict_haskey(qdict, "execute")) {
599 process_command(s, qdict);
600 } else {
601 if (!qdict_haskey(qdict, "error")) {
602 QDECREF(qdict);
603 qdict = qdict_new();
604 g_warning("unrecognized payload format");
605 error_setg(&err, QERR_UNSUPPORTED);
606 qdict_put_obj(qdict, "error", qmp_build_error_object(err));
607 error_free(err);
609 ret = send_response(s, QOBJECT(qdict));
610 if (ret < 0) {
611 g_warning("error sending error response: %s", strerror(-ret));
615 QDECREF(qdict);
618 /* false return signals GAChannel to close the current client connection */
619 static gboolean channel_event_cb(GIOCondition condition, gpointer data)
621 GAState *s = data;
622 gchar buf[QGA_READ_COUNT_DEFAULT+1];
623 gsize count;
624 GError *err = NULL;
625 GIOStatus status = ga_channel_read(s->channel, buf, QGA_READ_COUNT_DEFAULT, &count);
626 if (err != NULL) {
627 g_warning("error reading channel: %s", err->message);
628 g_error_free(err);
629 return false;
631 switch (status) {
632 case G_IO_STATUS_ERROR:
633 g_warning("error reading channel");
634 return false;
635 case G_IO_STATUS_NORMAL:
636 buf[count] = 0;
637 g_debug("read data, count: %d, data: %s", (int)count, buf);
638 json_message_parser_feed(&s->parser, (char *)buf, (int)count);
639 break;
640 case G_IO_STATUS_EOF:
641 g_debug("received EOF");
642 if (!s->virtio) {
643 return false;
645 /* fall through */
646 case G_IO_STATUS_AGAIN:
647 /* virtio causes us to spin here when no process is attached to
648 * host-side chardev. sleep a bit to mitigate this
650 if (s->virtio) {
651 usleep(100*1000);
653 return true;
654 default:
655 g_warning("unknown channel read status, closing");
656 return false;
658 return true;
661 static gboolean channel_init(GAState *s, const gchar *method, const gchar *path)
663 GAChannelMethod channel_method;
665 if (strcmp(method, "virtio-serial") == 0) {
666 s->virtio = true; /* virtio requires special handling in some cases */
667 channel_method = GA_CHANNEL_VIRTIO_SERIAL;
668 } else if (strcmp(method, "isa-serial") == 0) {
669 channel_method = GA_CHANNEL_ISA_SERIAL;
670 } else if (strcmp(method, "unix-listen") == 0) {
671 channel_method = GA_CHANNEL_UNIX_LISTEN;
672 } else {
673 g_critical("unsupported channel method/type: %s", method);
674 return false;
677 s->channel = ga_channel_new(channel_method, path, channel_event_cb, s);
678 if (!s->channel) {
679 g_critical("failed to create guest agent channel");
680 return false;
683 return true;
686 #ifdef _WIN32
687 DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data,
688 LPVOID ctx)
690 DWORD ret = NO_ERROR;
691 GAService *service = &ga_state->service;
693 switch (ctrl)
695 case SERVICE_CONTROL_STOP:
696 case SERVICE_CONTROL_SHUTDOWN:
697 quit_handler(SIGTERM);
698 service->status.dwCurrentState = SERVICE_STOP_PENDING;
699 SetServiceStatus(service->status_handle, &service->status);
700 break;
702 default:
703 ret = ERROR_CALL_NOT_IMPLEMENTED;
705 return ret;
708 VOID WINAPI service_main(DWORD argc, TCHAR *argv[])
710 GAService *service = &ga_state->service;
712 service->status_handle = RegisterServiceCtrlHandlerEx(QGA_SERVICE_NAME,
713 service_ctrl_handler, NULL);
715 if (service->status_handle == 0) {
716 g_critical("Failed to register extended requests function!\n");
717 return;
720 service->status.dwServiceType = SERVICE_WIN32;
721 service->status.dwCurrentState = SERVICE_RUNNING;
722 service->status.dwControlsAccepted = SERVICE_ACCEPT_STOP | SERVICE_ACCEPT_SHUTDOWN;
723 service->status.dwWin32ExitCode = NO_ERROR;
724 service->status.dwServiceSpecificExitCode = NO_ERROR;
725 service->status.dwCheckPoint = 0;
726 service->status.dwWaitHint = 0;
727 SetServiceStatus(service->status_handle, &service->status);
729 g_main_loop_run(ga_state->main_loop);
731 service->status.dwCurrentState = SERVICE_STOPPED;
732 SetServiceStatus(service->status_handle, &service->status);
734 #endif
736 static void set_persistent_state_defaults(GAPersistentState *pstate)
738 g_assert(pstate);
739 pstate->fd_counter = QGA_PSTATE_DEFAULT_FD_COUNTER;
742 static void persistent_state_from_keyfile(GAPersistentState *pstate,
743 GKeyFile *keyfile)
745 g_assert(pstate);
746 g_assert(keyfile);
747 /* if any fields are missing, either because the file was tampered with
748 * by agents of chaos, or because the field wasn't present at the time the
749 * file was created, the best we can ever do is start over with the default
750 * values. so load them now, and ignore any errors in accessing key-value
751 * pairs
753 set_persistent_state_defaults(pstate);
755 if (g_key_file_has_key(keyfile, "global", "fd_counter", NULL)) {
756 pstate->fd_counter =
757 g_key_file_get_integer(keyfile, "global", "fd_counter", NULL);
761 static void persistent_state_to_keyfile(const GAPersistentState *pstate,
762 GKeyFile *keyfile)
764 g_assert(pstate);
765 g_assert(keyfile);
767 g_key_file_set_integer(keyfile, "global", "fd_counter", pstate->fd_counter);
770 static gboolean write_persistent_state(const GAPersistentState *pstate,
771 const gchar *path)
773 GKeyFile *keyfile = g_key_file_new();
774 GError *gerr = NULL;
775 gboolean ret = true;
776 gchar *data = NULL;
777 gsize data_len;
779 g_assert(pstate);
781 persistent_state_to_keyfile(pstate, keyfile);
782 data = g_key_file_to_data(keyfile, &data_len, &gerr);
783 if (gerr) {
784 g_critical("failed to convert persistent state to string: %s",
785 gerr->message);
786 ret = false;
787 goto out;
790 g_file_set_contents(path, data, data_len, &gerr);
791 if (gerr) {
792 g_critical("failed to write persistent state to %s: %s",
793 path, gerr->message);
794 ret = false;
795 goto out;
798 out:
799 if (gerr) {
800 g_error_free(gerr);
802 if (keyfile) {
803 g_key_file_free(keyfile);
805 g_free(data);
806 return ret;
809 static gboolean read_persistent_state(GAPersistentState *pstate,
810 const gchar *path, gboolean frozen)
812 GKeyFile *keyfile = NULL;
813 GError *gerr = NULL;
814 struct stat st;
815 gboolean ret = true;
817 g_assert(pstate);
819 if (stat(path, &st) == -1) {
820 /* it's okay if state file doesn't exist, but any other error
821 * indicates a permissions issue or some other misconfiguration
822 * that we likely won't be able to recover from.
824 if (errno != ENOENT) {
825 g_critical("unable to access state file at path %s: %s",
826 path, strerror(errno));
827 ret = false;
828 goto out;
831 /* file doesn't exist. initialize state to default values and
832 * attempt to save now. (we could wait till later when we have
833 * modified state we need to commit, but if there's a problem,
834 * such as a missing parent directory, we want to catch it now)
836 * there is a potential scenario where someone either managed to
837 * update the agent from a version that didn't use a key store
838 * while qemu-ga thought the filesystem was frozen, or
839 * deleted the key store prior to issuing a fsfreeze, prior
840 * to restarting the agent. in this case we go ahead and defer
841 * initial creation till we actually have modified state to
842 * write, otherwise fail to recover from freeze.
844 set_persistent_state_defaults(pstate);
845 if (!frozen) {
846 ret = write_persistent_state(pstate, path);
847 if (!ret) {
848 g_critical("unable to create state file at path %s", path);
849 ret = false;
850 goto out;
853 ret = true;
854 goto out;
857 keyfile = g_key_file_new();
858 g_key_file_load_from_file(keyfile, path, 0, &gerr);
859 if (gerr) {
860 g_critical("error loading persistent state from path: %s, %s",
861 path, gerr->message);
862 ret = false;
863 goto out;
866 persistent_state_from_keyfile(pstate, keyfile);
868 out:
869 if (keyfile) {
870 g_key_file_free(keyfile);
872 if (gerr) {
873 g_error_free(gerr);
876 return ret;
879 int64_t ga_get_fd_handle(GAState *s, Error **errp)
881 int64_t handle;
883 g_assert(s->pstate_filepath);
884 /* we blacklist commands and avoid operations that potentially require
885 * writing to disk when we're in a frozen state. this includes opening
886 * new files, so we should never get here in that situation
888 g_assert(!ga_is_frozen(s));
890 handle = s->pstate.fd_counter++;
892 /* This should never happen on a reasonable timeframe, as guest-file-open
893 * would have to be issued 2^63 times */
894 if (s->pstate.fd_counter == INT64_MAX) {
895 abort();
898 if (!write_persistent_state(&s->pstate, s->pstate_filepath)) {
899 error_setg(errp, "failed to commit persistent state to disk");
900 return -1;
903 return handle;
906 static void ga_print_cmd(QmpCommand *cmd, void *opaque)
908 printf("%s\n", qmp_command_name(cmd));
911 static GList *split_list(const gchar *str, const gchar *delim)
913 GList *list = NULL;
914 int i;
915 gchar **strv;
917 strv = g_strsplit(str, delim, -1);
918 for (i = 0; strv[i]; i++) {
919 list = g_list_prepend(list, strv[i]);
921 g_free(strv);
923 return list;
926 typedef struct GAConfig {
927 char *channel_path;
928 char *method;
929 char *log_filepath;
930 char *pid_filepath;
931 #ifdef CONFIG_FSFREEZE
932 char *fsfreeze_hook;
933 #endif
934 char *state_dir;
935 #ifdef _WIN32
936 const char *service;
937 #endif
938 gchar *bliststr; /* blacklist may point to this string */
939 GList *blacklist;
940 int daemonize;
941 GLogLevelFlags log_level;
942 int dumpconf;
943 } GAConfig;
945 static void config_load(GAConfig *config)
947 GError *gerr = NULL;
948 GKeyFile *keyfile;
949 const char *conf = g_getenv("QGA_CONF") ?: QGA_CONF_DEFAULT;
951 /* read system config */
952 keyfile = g_key_file_new();
953 if (!g_key_file_load_from_file(keyfile, conf, 0, &gerr)) {
954 goto end;
956 if (g_key_file_has_key(keyfile, "general", "daemon", NULL)) {
957 config->daemonize =
958 g_key_file_get_boolean(keyfile, "general", "daemon", &gerr);
960 if (g_key_file_has_key(keyfile, "general", "method", NULL)) {
961 config->method =
962 g_key_file_get_string(keyfile, "general", "method", &gerr);
964 if (g_key_file_has_key(keyfile, "general", "path", NULL)) {
965 config->channel_path =
966 g_key_file_get_string(keyfile, "general", "path", &gerr);
968 if (g_key_file_has_key(keyfile, "general", "logfile", NULL)) {
969 config->log_filepath =
970 g_key_file_get_string(keyfile, "general", "logfile", &gerr);
972 if (g_key_file_has_key(keyfile, "general", "pidfile", NULL)) {
973 config->pid_filepath =
974 g_key_file_get_string(keyfile, "general", "pidfile", &gerr);
976 #ifdef CONFIG_FSFREEZE
977 if (g_key_file_has_key(keyfile, "general", "fsfreeze-hook", NULL)) {
978 config->fsfreeze_hook =
979 g_key_file_get_string(keyfile,
980 "general", "fsfreeze-hook", &gerr);
982 #endif
983 if (g_key_file_has_key(keyfile, "general", "statedir", NULL)) {
984 config->state_dir =
985 g_key_file_get_string(keyfile, "general", "statedir", &gerr);
987 if (g_key_file_has_key(keyfile, "general", "verbose", NULL) &&
988 g_key_file_get_boolean(keyfile, "general", "verbose", &gerr)) {
989 /* enable all log levels */
990 config->log_level = G_LOG_LEVEL_MASK;
992 if (g_key_file_has_key(keyfile, "general", "blacklist", NULL)) {
993 config->bliststr =
994 g_key_file_get_string(keyfile, "general", "blacklist", &gerr);
995 config->blacklist = g_list_concat(config->blacklist,
996 split_list(config->bliststr, ","));
999 end:
1000 g_key_file_free(keyfile);
1001 if (gerr &&
1002 !(gerr->domain == G_FILE_ERROR && gerr->code == G_FILE_ERROR_NOENT)) {
1003 g_critical("error loading configuration from path: %s, %s",
1004 QGA_CONF_DEFAULT, gerr->message);
1005 exit(EXIT_FAILURE);
1007 g_clear_error(&gerr);
1010 static gchar *list_join(GList *list, const gchar separator)
1012 GString *str = g_string_new("");
1014 while (list) {
1015 str = g_string_append(str, (gchar *)list->data);
1016 list = g_list_next(list);
1017 if (list) {
1018 str = g_string_append_c(str, separator);
1022 return g_string_free(str, FALSE);
1025 static void config_dump(GAConfig *config)
1027 GError *error = NULL;
1028 GKeyFile *keyfile;
1029 gchar *tmp;
1031 keyfile = g_key_file_new();
1032 g_assert(keyfile);
1034 g_key_file_set_boolean(keyfile, "general", "daemon", config->daemonize);
1035 g_key_file_set_string(keyfile, "general", "method", config->method);
1036 g_key_file_set_string(keyfile, "general", "path", config->channel_path);
1037 if (config->log_filepath) {
1038 g_key_file_set_string(keyfile, "general", "logfile",
1039 config->log_filepath);
1041 g_key_file_set_string(keyfile, "general", "pidfile", config->pid_filepath);
1042 #ifdef CONFIG_FSFREEZE
1043 if (config->fsfreeze_hook) {
1044 g_key_file_set_string(keyfile, "general", "fsfreeze-hook",
1045 config->fsfreeze_hook);
1047 #endif
1048 g_key_file_set_string(keyfile, "general", "statedir", config->state_dir);
1049 g_key_file_set_boolean(keyfile, "general", "verbose",
1050 config->log_level == G_LOG_LEVEL_MASK);
1051 tmp = list_join(config->blacklist, ',');
1052 g_key_file_set_string(keyfile, "general", "blacklist", tmp);
1053 g_free(tmp);
1055 tmp = g_key_file_to_data(keyfile, NULL, &error);
1056 printf("%s", tmp);
1058 g_free(tmp);
1059 g_key_file_free(keyfile);
1062 static void config_parse(GAConfig *config, int argc, char **argv)
1064 const char *sopt = "hVvdm:p:l:f:F::b:s:t:D";
1065 int opt_ind = 0, ch;
1066 const struct option lopt[] = {
1067 { "help", 0, NULL, 'h' },
1068 { "version", 0, NULL, 'V' },
1069 { "dump-conf", 0, NULL, 'D' },
1070 { "logfile", 1, NULL, 'l' },
1071 { "pidfile", 1, NULL, 'f' },
1072 #ifdef CONFIG_FSFREEZE
1073 { "fsfreeze-hook", 2, NULL, 'F' },
1074 #endif
1075 { "verbose", 0, NULL, 'v' },
1076 { "method", 1, NULL, 'm' },
1077 { "path", 1, NULL, 'p' },
1078 { "daemonize", 0, NULL, 'd' },
1079 { "blacklist", 1, NULL, 'b' },
1080 #ifdef _WIN32
1081 { "service", 1, NULL, 's' },
1082 #endif
1083 { "statedir", 1, NULL, 't' },
1084 { NULL, 0, NULL, 0 }
1087 while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
1088 switch (ch) {
1089 case 'm':
1090 g_free(config->method);
1091 config->method = g_strdup(optarg);
1092 break;
1093 case 'p':
1094 g_free(config->channel_path);
1095 config->channel_path = g_strdup(optarg);
1096 break;
1097 case 'l':
1098 g_free(config->log_filepath);
1099 config->log_filepath = g_strdup(optarg);
1100 break;
1101 case 'f':
1102 g_free(config->pid_filepath);
1103 config->pid_filepath = g_strdup(optarg);
1104 break;
1105 #ifdef CONFIG_FSFREEZE
1106 case 'F':
1107 g_free(config->fsfreeze_hook);
1108 config->fsfreeze_hook = g_strdup(optarg ?: QGA_FSFREEZE_HOOK_DEFAULT);
1109 break;
1110 #endif
1111 case 't':
1112 g_free(config->state_dir);
1113 config->state_dir = g_strdup(optarg);
1114 break;
1115 case 'v':
1116 /* enable all log levels */
1117 config->log_level = G_LOG_LEVEL_MASK;
1118 break;
1119 case 'V':
1120 printf("QEMU Guest Agent %s\n", QEMU_VERSION);
1121 exit(EXIT_SUCCESS);
1122 case 'd':
1123 config->daemonize = 1;
1124 break;
1125 case 'D':
1126 config->dumpconf = 1;
1127 break;
1128 case 'b': {
1129 if (is_help_option(optarg)) {
1130 qmp_for_each_command(ga_print_cmd, NULL);
1131 exit(EXIT_SUCCESS);
1133 config->blacklist = g_list_concat(config->blacklist,
1134 split_list(optarg, ","));
1135 break;
1137 #ifdef _WIN32
1138 case 's':
1139 config->service = optarg;
1140 if (strcmp(config->service, "install") == 0) {
1141 if (ga_install_vss_provider()) {
1142 exit(EXIT_FAILURE);
1144 if (ga_install_service(config->channel_path,
1145 config->log_filepath, config->state_dir)) {
1146 exit(EXIT_FAILURE);
1148 exit(EXIT_SUCCESS);
1149 } else if (strcmp(config->service, "uninstall") == 0) {
1150 ga_uninstall_vss_provider();
1151 exit(ga_uninstall_service());
1152 } else if (strcmp(config->service, "vss-install") == 0) {
1153 if (ga_install_vss_provider()) {
1154 exit(EXIT_FAILURE);
1156 exit(EXIT_SUCCESS);
1157 } else if (strcmp(config->service, "vss-uninstall") == 0) {
1158 ga_uninstall_vss_provider();
1159 exit(EXIT_SUCCESS);
1160 } else {
1161 printf("Unknown service command.\n");
1162 exit(EXIT_FAILURE);
1164 break;
1165 #endif
1166 case 'h':
1167 usage(argv[0]);
1168 exit(EXIT_SUCCESS);
1169 case '?':
1170 g_print("Unknown option, try '%s --help' for more information.\n",
1171 argv[0]);
1172 exit(EXIT_FAILURE);
1177 static void config_free(GAConfig *config)
1179 g_free(config->method);
1180 g_free(config->log_filepath);
1181 g_free(config->pid_filepath);
1182 g_free(config->state_dir);
1183 g_free(config->channel_path);
1184 g_free(config->bliststr);
1185 #ifdef CONFIG_FSFREEZE
1186 g_free(config->fsfreeze_hook);
1187 #endif
1188 g_free(config);
1191 static bool check_is_frozen(GAState *s)
1193 #ifndef _WIN32
1194 /* check if a previous instance of qemu-ga exited with filesystems' state
1195 * marked as frozen. this could be a stale value (a non-qemu-ga process
1196 * or reboot may have since unfrozen them), but better to require an
1197 * uneeded unfreeze than to risk hanging on start-up
1199 struct stat st;
1200 if (stat(s->state_filepath_isfrozen, &st) == -1) {
1201 /* it's okay if the file doesn't exist, but if we can't access for
1202 * some other reason, such as permissions, there's a configuration
1203 * that needs to be addressed. so just bail now before we get into
1204 * more trouble later
1206 if (errno != ENOENT) {
1207 g_critical("unable to access state file at path %s: %s",
1208 s->state_filepath_isfrozen, strerror(errno));
1209 return EXIT_FAILURE;
1211 } else {
1212 g_warning("previous instance appears to have exited with frozen"
1213 " filesystems. deferring logging/pidfile creation and"
1214 " disabling non-fsfreeze-safe commands until"
1215 " guest-fsfreeze-thaw is issued, or filesystems are"
1216 " manually unfrozen and the file %s is removed",
1217 s->state_filepath_isfrozen);
1218 return true;
1220 #endif
1221 return false;
1224 static int run_agent(GAState *s, GAConfig *config)
1226 ga_state = s;
1228 g_log_set_default_handler(ga_log, s);
1229 g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR);
1230 ga_enable_logging(s);
1232 #ifdef _WIN32
1233 /* On win32 the state directory is application specific (be it the default
1234 * or a user override). We got past the command line parsing; let's create
1235 * the directory (with any intermediate directories). If we run into an
1236 * error later on, we won't try to clean up the directory, it is considered
1237 * persistent.
1239 if (g_mkdir_with_parents(config->state_dir, S_IRWXU) == -1) {
1240 g_critical("unable to create (an ancestor of) the state directory"
1241 " '%s': %s", config->state_dir, strerror(errno));
1242 return EXIT_FAILURE;
1244 #endif
1246 if (ga_is_frozen(s)) {
1247 if (config->daemonize) {
1248 /* delay opening/locking of pidfile till filesystems are unfrozen */
1249 s->deferred_options.pid_filepath = config->pid_filepath;
1250 become_daemon(NULL);
1252 if (config->log_filepath) {
1253 /* delay opening the log file till filesystems are unfrozen */
1254 s->deferred_options.log_filepath = config->log_filepath;
1256 ga_disable_logging(s);
1257 qmp_for_each_command(ga_disable_non_whitelisted, NULL);
1258 } else {
1259 if (config->daemonize) {
1260 become_daemon(config->pid_filepath);
1262 if (config->log_filepath) {
1263 FILE *log_file = ga_open_logfile(config->log_filepath);
1264 if (!log_file) {
1265 g_critical("unable to open specified log file: %s",
1266 strerror(errno));
1267 return EXIT_FAILURE;
1269 s->log_file = log_file;
1273 /* load persistent state from disk */
1274 if (!read_persistent_state(&s->pstate,
1275 s->pstate_filepath,
1276 ga_is_frozen(s))) {
1277 g_critical("failed to load persistent state");
1278 return EXIT_FAILURE;
1281 config->blacklist = ga_command_blacklist_init(config->blacklist);
1282 if (config->blacklist) {
1283 GList *l = config->blacklist;
1284 s->blacklist = config->blacklist;
1285 do {
1286 g_debug("disabling command: %s", (char *)l->data);
1287 qmp_disable_command(l->data);
1288 l = g_list_next(l);
1289 } while (l);
1291 s->command_state = ga_command_state_new();
1292 ga_command_state_init(s, s->command_state);
1293 ga_command_state_init_all(s->command_state);
1294 json_message_parser_init(&s->parser, process_event);
1295 ga_state = s;
1296 #ifndef _WIN32
1297 if (!register_signal_handlers()) {
1298 g_critical("failed to register signal handlers");
1299 return EXIT_FAILURE;
1301 #endif
1303 s->main_loop = g_main_loop_new(NULL, false);
1304 if (!channel_init(ga_state, config->method, config->channel_path)) {
1305 g_critical("failed to initialize guest agent channel");
1306 return EXIT_FAILURE;
1308 #ifndef _WIN32
1309 g_main_loop_run(ga_state->main_loop);
1310 #else
1311 if (config->daemonize) {
1312 SERVICE_TABLE_ENTRY service_table[] = {
1313 { (char *)QGA_SERVICE_NAME, service_main }, { NULL, NULL } };
1314 StartServiceCtrlDispatcher(service_table);
1315 } else {
1316 g_main_loop_run(ga_state->main_loop);
1318 #endif
1320 return EXIT_SUCCESS;
1323 static void free_blacklist_entry(gpointer entry, gpointer unused)
1325 g_free(entry);
1328 int main(int argc, char **argv)
1330 int ret = EXIT_SUCCESS;
1331 GAState *s = g_new0(GAState, 1);
1332 GAConfig *config = g_new0(GAConfig, 1);
1334 config->log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL;
1336 module_call_init(MODULE_INIT_QAPI);
1338 init_dfl_pathnames();
1339 config_load(config);
1340 config_parse(config, argc, argv);
1342 if (config->pid_filepath == NULL) {
1343 config->pid_filepath = g_strdup(dfl_pathnames.pidfile);
1346 if (config->state_dir == NULL) {
1347 config->state_dir = g_strdup(dfl_pathnames.state_dir);
1350 if (config->method == NULL) {
1351 config->method = g_strdup("virtio-serial");
1354 if (config->channel_path == NULL) {
1355 if (strcmp(config->method, "virtio-serial") == 0) {
1356 /* try the default path for the virtio-serial port */
1357 config->channel_path = g_strdup(QGA_VIRTIO_PATH_DEFAULT);
1358 } else if (strcmp(config->method, "isa-serial") == 0) {
1359 /* try the default path for the serial port - COM1 */
1360 config->channel_path = g_strdup(QGA_SERIAL_PATH_DEFAULT);
1361 } else {
1362 g_critical("must specify a path for this channel");
1363 ret = EXIT_FAILURE;
1364 goto end;
1368 s->log_level = config->log_level;
1369 s->log_file = stderr;
1370 #ifdef CONFIG_FSFREEZE
1371 s->fsfreeze_hook = config->fsfreeze_hook;
1372 #endif
1373 s->pstate_filepath = g_strdup_printf("%s/qga.state", config->state_dir);
1374 s->state_filepath_isfrozen = g_strdup_printf("%s/qga.state.isfrozen",
1375 config->state_dir);
1376 s->frozen = check_is_frozen(s);
1378 if (config->dumpconf) {
1379 config_dump(config);
1380 goto end;
1383 ret = run_agent(s, config);
1385 end:
1386 if (s->command_state) {
1387 ga_command_state_cleanup_all(s->command_state);
1389 if (s->channel) {
1390 ga_channel_free(s->channel);
1392 g_list_foreach(config->blacklist, free_blacklist_entry, NULL);
1393 g_free(s->pstate_filepath);
1394 g_free(s->state_filepath_isfrozen);
1396 if (config->daemonize) {
1397 unlink(config->pid_filepath);
1400 config_free(config);
1402 return ret;