hw/pl031.c

   1 /*
   2  * ARM AMBA PrimeCell PL031 RTC
   3  *
   4  * Copyright (c) 2007 CodeSourcery
   5  *
   6  * This file is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  */
  11
  12 #include "sysbus.h"
  13 #include "qemu-timer.h"
  14
  15 //#define DEBUG_PL031
  16
  17 #ifdef DEBUG_PL031
  18 #define DPRINTF(fmt, ...) \
  19 do { printf("pl031: " fmt , ## __VA_ARGS__); } while (0)
  20 #else
  21 #define DPRINTF(fmt, ...) do {} while(0)
  22 #endif
  23
  24 #define RTC_DR      0x00    /* Data read register */
  25 #define RTC_MR      0x04    /* Match register */
  26 #define RTC_LR      0x08    /* Data load register */
  27 #define RTC_CR      0x0c    /* Control register */
  28 #define RTC_IMSC    0x10    /* Interrupt mask and set register */
  29 #define RTC_RIS     0x14    /* Raw interrupt status register */
  30 #define RTC_MIS     0x18    /* Masked interrupt status register */
  31 #define RTC_ICR     0x1c    /* Interrupt clear register */
  32
  33 typedef struct {
  34     SysBusDevice busdev;
  35     QEMUTimer *timer;
  36     qemu_irq irq;
  37
  38     uint32_t tick_offset;
  39
  40     uint32_t mr;
  41     uint32_t lr;
  42     uint32_t cr;
  43     uint32_t im;
  44     uint32_t is;
  45 } pl031_state;
  46
  47 static const unsigned char pl031_id[] = {
  48     0x31, 0x10, 0x14, 0x00,         /* Device ID        */
  49     0x0d, 0xf0, 0x05, 0xb1          /* Cell ID      */
  50 };
  51
  52 static void pl031_update(pl031_state *s)
  53 {
  54     qemu_set_irq(s->irq, s->is & s->im);
  55 }
  56
  57 static void pl031_interrupt(void * opaque)
  58 {
  59     pl031_state *s = (pl031_state *)opaque;
  60
  61     s->im = 1;
  62     DPRINTF("Alarm raised\n");
  63     pl031_update(s);
  64 }
  65
  66 static uint32_t pl031_get_count(pl031_state *s)
  67 {
  68     /* This assumes qemu_get_clock returns the time since the machine was
  69        created.  */
  70     return s->tick_offset + qemu_get_clock(vm_clock) / get_ticks_per_sec();
  71 }
  72
  73 static void pl031_set_alarm(pl031_state *s)
  74 {
  75     int64_t now;
  76     uint32_t ticks;
  77
  78     now = qemu_get_clock(vm_clock);
  79     ticks = s->tick_offset + now / get_ticks_per_sec();
  80
  81     /* The timer wraps around.  This subtraction also wraps in the same way,
  82        and gives correct results when alarm < now_ticks.  */
  83     ticks = s->mr - ticks;
  84     DPRINTF("Alarm set in %ud ticks\n", ticks);
  85     if (ticks == 0) {
  86         qemu_del_timer(s->timer);
  87         pl031_interrupt(s);
  88     } else {
  89         qemu_mod_timer(s->timer, now + (int64_t)ticks * get_ticks_per_sec());
  90     }
  91 }
  92
  93 static uint32_t pl031_read(void *opaque, target_phys_addr_t offset)
  94 {
  95     pl031_state *s = (pl031_state *)opaque;
  96
  97     if (offset >= 0xfe0  &&  offset < 0x1000)
  98         return pl031_id[(offset - 0xfe0) >> 2];
  99
 100     switch (offset) {
 101     case RTC_DR:
 102         return pl031_get_count(s);
 103     case RTC_MR:
 104         return s->mr;
 105     case RTC_IMSC:
 106         return s->im;
 107     case RTC_RIS:
 108         return s->is;
 109     case RTC_LR:
 110         return s->lr;
 111     case RTC_CR:
 112         /* RTC is permanently enabled.  */
 113         return 1;
 114     case RTC_MIS:
 115         return s->is & s->im;
 116     case RTC_ICR:
 117         fprintf(stderr, "qemu: pl031_read: Unexpected offset 0x%x\n",
 118                 (int)offset);
 119         break;
 120     default:
 121         hw_error("pl031_read: Bad offset 0x%x\n", (int)offset);
 122         break;
 123     }
 124
 125     return 0;
 126 }
 127
 128 static void pl031_write(void * opaque, target_phys_addr_t offset,
 129                         uint32_t value)
 130 {
 131     pl031_state *s = (pl031_state *)opaque;
 132
 133
 134     switch (offset) {
 135     case RTC_LR:
 136         s->tick_offset += value - pl031_get_count(s);
 137         pl031_set_alarm(s);
 138         break;
 139     case RTC_MR:
 140         s->mr = value;
 141         pl031_set_alarm(s);
 142         break;
 143     case RTC_IMSC:
 144         s->im = value & 1;
 145         DPRINTF("Interrupt mask %d\n", s->im);
 146         pl031_update(s);
 147         break;
 148     case RTC_ICR:
 149         /* The PL031 documentation (DDI0224B) states that the interupt is
 150            cleared when bit 0 of the written value is set.  However the
 151            arm926e documentation (DDI0287B) states that the interrupt is
 152            cleared when any value is written.  */
 153         DPRINTF("Interrupt cleared");
 154         s->is = 0;
 155         pl031_update(s);
 156         break;
 157     case RTC_CR:
 158         /* Written value is ignored.  */
 159         break;
 160
 161     case RTC_DR:
 162     case RTC_MIS:
 163     case RTC_RIS:
 164         fprintf(stderr, "qemu: pl031_write: Unexpected offset 0x%x\n",
 165                 (int)offset);
 166         break;
 167
 168     default:
 169         hw_error("pl031_write: Bad offset 0x%x\n", (int)offset);
 170         break;
 171     }
 172 }
 173
 174 static CPUWriteMemoryFunc * const  pl031_writefn[] = {
 175     pl031_write,
 176     pl031_write,
 177     pl031_write
 178 };
 179
 180 static CPUReadMemoryFunc * const  pl031_readfn[] = {
 181     pl031_read,
 182     pl031_read,
 183     pl031_read
 184 };
 185
 186 static int pl031_init(SysBusDevice *dev)
 187 {
 188     int iomemtype;
 189     pl031_state *s = FROM_SYSBUS(pl031_state, dev);
 190     struct tm tm;
 191
 192     iomemtype = cpu_register_io_memory(pl031_readfn, pl031_writefn, s,
 193                                        DEVICE_NATIVE_ENDIAN);
 194     if (iomemtype == -1) {
 195         hw_error("pl031_init: Can't register I/O memory\n");
 196     }
 197
 198     sysbus_init_mmio(dev, 0x1000, iomemtype);
 199
 200     sysbus_init_irq(dev, &s->irq);
 201     /* ??? We assume vm_clock is zero at this point.  */
 202     qemu_get_timedate(&tm, 0);
 203     s->tick_offset = mktimegm(&tm);
 204
 205     s->timer = qemu_new_timer(vm_clock, pl031_interrupt, s);
 206     return 0;
 207 }
 208
 209 static void pl031_register_devices(void)
 210 {
 211     sysbus_register_dev("pl031", sizeof(pl031_state), pl031_init);
 212 }
 213
 214 device_init(pl031_register_devices)