2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 struct BdrvDirtyBitmap
{
54 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
57 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BlockDriverCompletionFunc
*cb
,
85 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
86 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
87 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
89 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
90 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
92 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
93 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
95 /* If non-zero, use only whitelisted block drivers */
96 static int use_bdrv_whitelist
;
99 static int is_windows_drive_prefix(const char *filename
)
101 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
102 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
106 int is_windows_drive(const char *filename
)
108 if (is_windows_drive_prefix(filename
) &&
111 if (strstart(filename
, "\\\\.\\", NULL
) ||
112 strstart(filename
, "//./", NULL
))
118 /* throttling disk I/O limits */
119 void bdrv_set_io_limits(BlockDriverState
*bs
,
124 throttle_config(&bs
->throttle_state
, cfg
);
126 for (i
= 0; i
< 2; i
++) {
127 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
131 /* this function drain all the throttled IOs */
132 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
134 bool drained
= false;
135 bool enabled
= bs
->io_limits_enabled
;
138 bs
->io_limits_enabled
= false;
140 for (i
= 0; i
< 2; i
++) {
141 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
146 bs
->io_limits_enabled
= enabled
;
151 void bdrv_io_limits_disable(BlockDriverState
*bs
)
153 bs
->io_limits_enabled
= false;
155 bdrv_start_throttled_reqs(bs
);
157 throttle_destroy(&bs
->throttle_state
);
160 static void bdrv_throttle_read_timer_cb(void *opaque
)
162 BlockDriverState
*bs
= opaque
;
163 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
166 static void bdrv_throttle_write_timer_cb(void *opaque
)
168 BlockDriverState
*bs
= opaque
;
169 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
172 /* should be called before bdrv_set_io_limits if a limit is set */
173 void bdrv_io_limits_enable(BlockDriverState
*bs
)
175 assert(!bs
->io_limits_enabled
);
176 throttle_init(&bs
->throttle_state
,
178 bdrv_throttle_read_timer_cb
,
179 bdrv_throttle_write_timer_cb
,
181 bs
->io_limits_enabled
= true;
184 /* This function makes an IO wait if needed
186 * @nb_sectors: the number of sectors of the IO
187 * @is_write: is the IO a write
189 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
193 /* does this io must wait */
194 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
196 /* if must wait or any request of this type throttled queue the IO */
198 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
199 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
202 /* the IO will be executed, do the accounting */
203 throttle_account(&bs
->throttle_state
,
205 nb_sectors
* BDRV_SECTOR_SIZE
);
207 /* if the next request must wait -> do nothing */
208 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
212 /* else queue next request for execution */
213 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
216 /* check if the path starts with "<protocol>:" */
217 static int path_has_protocol(const char *path
)
222 if (is_windows_drive(path
) ||
223 is_windows_drive_prefix(path
)) {
226 p
= path
+ strcspn(path
, ":/\\");
228 p
= path
+ strcspn(path
, ":/");
234 int path_is_absolute(const char *path
)
237 /* specific case for names like: "\\.\d:" */
238 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
241 return (*path
== '/' || *path
== '\\');
243 return (*path
== '/');
247 /* if filename is absolute, just copy it to dest. Otherwise, build a
248 path to it by considering it is relative to base_path. URL are
250 void path_combine(char *dest
, int dest_size
,
251 const char *base_path
,
252 const char *filename
)
259 if (path_is_absolute(filename
)) {
260 pstrcpy(dest
, dest_size
, filename
);
262 p
= strchr(base_path
, ':');
267 p1
= strrchr(base_path
, '/');
271 p2
= strrchr(base_path
, '\\');
283 if (len
> dest_size
- 1)
285 memcpy(dest
, base_path
, len
);
287 pstrcat(dest
, dest_size
, filename
);
291 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
293 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
294 pstrcpy(dest
, sz
, bs
->backing_file
);
296 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
300 void bdrv_register(BlockDriver
*bdrv
)
302 /* Block drivers without coroutine functions need emulation */
303 if (!bdrv
->bdrv_co_readv
) {
304 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
305 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
307 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
308 * the block driver lacks aio we need to emulate that too.
310 if (!bdrv
->bdrv_aio_readv
) {
311 /* add AIO emulation layer */
312 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
313 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
317 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
320 /* create a new block device (by default it is empty) */
321 BlockDriverState
*bdrv_new(const char *device_name
)
323 BlockDriverState
*bs
;
325 bs
= g_malloc0(sizeof(BlockDriverState
));
326 QLIST_INIT(&bs
->dirty_bitmaps
);
327 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
328 if (device_name
[0] != '\0') {
329 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
331 bdrv_iostatus_disable(bs
);
332 notifier_list_init(&bs
->close_notifiers
);
333 notifier_with_return_list_init(&bs
->before_write_notifiers
);
334 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
335 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
341 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
343 notifier_list_add(&bs
->close_notifiers
, notify
);
346 BlockDriver
*bdrv_find_format(const char *format_name
)
349 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
350 if (!strcmp(drv1
->format_name
, format_name
)) {
357 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
359 static const char *whitelist_rw
[] = {
360 CONFIG_BDRV_RW_WHITELIST
362 static const char *whitelist_ro
[] = {
363 CONFIG_BDRV_RO_WHITELIST
367 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
368 return 1; /* no whitelist, anything goes */
371 for (p
= whitelist_rw
; *p
; p
++) {
372 if (!strcmp(drv
->format_name
, *p
)) {
377 for (p
= whitelist_ro
; *p
; p
++) {
378 if (!strcmp(drv
->format_name
, *p
)) {
386 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
389 BlockDriver
*drv
= bdrv_find_format(format_name
);
390 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
393 typedef struct CreateCo
{
396 QEMUOptionParameter
*options
;
401 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
403 Error
*local_err
= NULL
;
406 CreateCo
*cco
= opaque
;
409 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
, &local_err
);
410 if (error_is_set(&local_err
)) {
411 error_propagate(&cco
->err
, local_err
);
416 int bdrv_create(BlockDriver
*drv
, const char* filename
,
417 QEMUOptionParameter
*options
, Error
**errp
)
424 .filename
= g_strdup(filename
),
430 if (!drv
->bdrv_create
) {
431 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
436 if (qemu_in_coroutine()) {
437 /* Fast-path if already in coroutine context */
438 bdrv_create_co_entry(&cco
);
440 co
= qemu_coroutine_create(bdrv_create_co_entry
);
441 qemu_coroutine_enter(co
, &cco
);
442 while (cco
.ret
== NOT_DONE
) {
449 if (error_is_set(&cco
.err
)) {
450 error_propagate(errp
, cco
.err
);
452 error_setg_errno(errp
, -ret
, "Could not create image");
457 g_free(cco
.filename
);
461 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
,
465 Error
*local_err
= NULL
;
468 drv
= bdrv_find_protocol(filename
, true);
470 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
474 ret
= bdrv_create(drv
, filename
, options
, &local_err
);
475 if (error_is_set(&local_err
)) {
476 error_propagate(errp
, local_err
);
482 * Create a uniquely-named empty temporary file.
483 * Return 0 upon success, otherwise a negative errno value.
485 int get_tmp_filename(char *filename
, int size
)
488 char temp_dir
[MAX_PATH
];
489 /* GetTempFileName requires that its output buffer (4th param)
490 have length MAX_PATH or greater. */
491 assert(size
>= MAX_PATH
);
492 return (GetTempPath(MAX_PATH
, temp_dir
)
493 && GetTempFileName(temp_dir
, "qem", 0, filename
)
494 ? 0 : -GetLastError());
498 tmpdir
= getenv("TMPDIR");
501 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
504 fd
= mkstemp(filename
);
508 if (close(fd
) != 0) {
517 * Detect host devices. By convention, /dev/cdrom[N] is always
518 * recognized as a host CDROM.
520 static BlockDriver
*find_hdev_driver(const char *filename
)
522 int score_max
= 0, score
;
523 BlockDriver
*drv
= NULL
, *d
;
525 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
526 if (d
->bdrv_probe_device
) {
527 score
= d
->bdrv_probe_device(filename
);
528 if (score
> score_max
) {
538 BlockDriver
*bdrv_find_protocol(const char *filename
,
539 bool allow_protocol_prefix
)
546 /* TODO Drivers without bdrv_file_open must be specified explicitly */
549 * XXX(hch): we really should not let host device detection
550 * override an explicit protocol specification, but moving this
551 * later breaks access to device names with colons in them.
552 * Thanks to the brain-dead persistent naming schemes on udev-
553 * based Linux systems those actually are quite common.
555 drv1
= find_hdev_driver(filename
);
560 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
561 return bdrv_find_format("file");
564 p
= strchr(filename
, ':');
567 if (len
> sizeof(protocol
) - 1)
568 len
= sizeof(protocol
) - 1;
569 memcpy(protocol
, filename
, len
);
570 protocol
[len
] = '\0';
571 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
572 if (drv1
->protocol_name
&&
573 !strcmp(drv1
->protocol_name
, protocol
)) {
580 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
581 BlockDriver
**pdrv
, Error
**errp
)
583 int score
, score_max
;
584 BlockDriver
*drv1
, *drv
;
588 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
589 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
590 drv
= bdrv_find_format("raw");
592 error_setg(errp
, "Could not find raw image format");
599 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
601 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
609 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
610 if (drv1
->bdrv_probe
) {
611 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
612 if (score
> score_max
) {
619 error_setg(errp
, "Could not determine image format: No compatible "
628 * Set the current 'total_sectors' value
630 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
632 BlockDriver
*drv
= bs
->drv
;
634 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
638 /* query actual device if possible, otherwise just trust the hint */
639 if (drv
->bdrv_getlength
) {
640 int64_t length
= drv
->bdrv_getlength(bs
);
644 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
647 bs
->total_sectors
= hint
;
652 * Set open flags for a given discard mode
654 * Return 0 on success, -1 if the discard mode was invalid.
656 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
658 *flags
&= ~BDRV_O_UNMAP
;
660 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
662 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
663 *flags
|= BDRV_O_UNMAP
;
672 * Set open flags for a given cache mode
674 * Return 0 on success, -1 if the cache mode was invalid.
676 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
678 *flags
&= ~BDRV_O_CACHE_MASK
;
680 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
681 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
682 } else if (!strcmp(mode
, "directsync")) {
683 *flags
|= BDRV_O_NOCACHE
;
684 } else if (!strcmp(mode
, "writeback")) {
685 *flags
|= BDRV_O_CACHE_WB
;
686 } else if (!strcmp(mode
, "unsafe")) {
687 *flags
|= BDRV_O_CACHE_WB
;
688 *flags
|= BDRV_O_NO_FLUSH
;
689 } else if (!strcmp(mode
, "writethrough")) {
690 /* this is the default */
699 * The copy-on-read flag is actually a reference count so multiple users may
700 * use the feature without worrying about clobbering its previous state.
701 * Copy-on-read stays enabled until all users have called to disable it.
703 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
708 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
710 assert(bs
->copy_on_read
> 0);
714 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
716 int open_flags
= flags
| BDRV_O_CACHE_WB
;
719 * Clear flags that are internal to the block layer before opening the
722 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
725 * Snapshots should be writable.
727 if (bs
->is_temporary
) {
728 open_flags
|= BDRV_O_RDWR
;
735 * Common part for opening disk images and files
737 * Removes all processed options from *options.
739 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
740 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
743 const char *filename
;
744 Error
*local_err
= NULL
;
747 assert(bs
->file
== NULL
);
748 assert(options
!= NULL
&& bs
->options
!= options
);
751 filename
= file
->filename
;
753 filename
= qdict_get_try_str(options
, "filename");
756 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
758 /* bdrv_open() with directly using a protocol as drv. This layer is already
759 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
760 * and return immediately. */
761 if (file
!= NULL
&& drv
->bdrv_file_open
) {
766 bs
->open_flags
= flags
;
767 bs
->buffer_alignment
= 512;
768 bs
->zero_beyond_eof
= true;
769 open_flags
= bdrv_open_flags(bs
, flags
);
770 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
772 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
774 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
775 ? "Driver '%s' can only be used for read-only devices"
776 : "Driver '%s' is not whitelisted",
781 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
782 if (flags
& BDRV_O_COPY_ON_READ
) {
783 if (!bs
->read_only
) {
784 bdrv_enable_copy_on_read(bs
);
786 error_setg(errp
, "Can't use copy-on-read on read-only device");
791 if (filename
!= NULL
) {
792 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
794 bs
->filename
[0] = '\0';
798 bs
->opaque
= g_malloc0(drv
->instance_size
);
800 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
802 /* Open the image, either directly or using a protocol */
803 if (drv
->bdrv_file_open
) {
804 assert(file
== NULL
);
805 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
806 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
809 error_setg(errp
, "Can't use '%s' as a block driver for the "
810 "protocol level", drv
->format_name
);
815 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
819 if (error_is_set(&local_err
)) {
820 error_propagate(errp
, local_err
);
821 } else if (bs
->filename
[0]) {
822 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
824 error_setg_errno(errp
, -ret
, "Could not open image");
829 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
831 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
836 if (bs
->is_temporary
) {
837 assert(bs
->filename
[0] != '\0');
838 unlink(bs
->filename
);
852 * Opens a file using a protocol (file, host_device, nbd, ...)
854 * options is a QDict of options to pass to the block drivers, or NULL for an
855 * empty set of options. The reference to the QDict belongs to the block layer
856 * after the call (even on failure), so if the caller intends to reuse the
857 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
859 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
,
860 QDict
*options
, int flags
, Error
**errp
)
862 BlockDriverState
*bs
;
865 bool allow_protocol_prefix
= false;
866 Error
*local_err
= NULL
;
869 /* NULL means an empty set of options */
870 if (options
== NULL
) {
871 options
= qdict_new();
875 bs
->options
= options
;
876 options
= qdict_clone_shallow(options
);
878 /* Fetch the file name from the options QDict if necessary */
880 filename
= qdict_get_try_str(options
, "filename");
881 } else if (filename
&& !qdict_haskey(options
, "filename")) {
882 qdict_put(options
, "filename", qstring_from_str(filename
));
883 allow_protocol_prefix
= true;
885 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
891 /* Find the right block driver */
892 drvname
= qdict_get_try_str(options
, "driver");
894 drv
= bdrv_find_format(drvname
);
896 error_setg(errp
, "Unknown driver '%s'", drvname
);
898 qdict_del(options
, "driver");
899 } else if (filename
) {
900 drv
= bdrv_find_protocol(filename
, allow_protocol_prefix
);
902 error_setg(errp
, "Unknown protocol");
905 error_setg(errp
, "Must specify either driver or file");
910 /* errp has been set already */
915 /* Parse the filename and open it */
916 if (drv
->bdrv_parse_filename
&& filename
) {
917 drv
->bdrv_parse_filename(filename
, options
, &local_err
);
918 if (error_is_set(&local_err
)) {
919 error_propagate(errp
, local_err
);
923 qdict_del(options
, "filename");
924 } else if (drv
->bdrv_needs_filename
&& !filename
) {
925 error_setg(errp
, "The '%s' block driver requires a file name",
931 ret
= bdrv_open_common(bs
, NULL
, options
, flags
, drv
, &local_err
);
933 error_propagate(errp
, local_err
);
937 /* Check if any unknown options were used */
938 if (qdict_size(options
) != 0) {
939 const QDictEntry
*entry
= qdict_first(options
);
940 error_setg(errp
, "Block protocol '%s' doesn't support the option '%s'",
941 drv
->format_name
, entry
->key
);
954 QDECREF(bs
->options
);
961 * Opens the backing file for a BlockDriverState if not yet open
963 * options is a QDict of options to pass to the block drivers, or NULL for an
964 * empty set of options. The reference to the QDict is transferred to this
965 * function (even on failure), so if the caller intends to reuse the dictionary,
966 * it needs to use QINCREF() before calling bdrv_file_open.
968 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
970 char backing_filename
[PATH_MAX
];
972 BlockDriver
*back_drv
= NULL
;
973 Error
*local_err
= NULL
;
975 if (bs
->backing_hd
!= NULL
) {
980 /* NULL means an empty set of options */
981 if (options
== NULL
) {
982 options
= qdict_new();
985 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
986 if (qdict_haskey(options
, "file.filename")) {
987 backing_filename
[0] = '\0';
988 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
992 bdrv_get_full_backing_filename(bs
, backing_filename
,
993 sizeof(backing_filename
));
996 bs
->backing_hd
= bdrv_new("");
998 if (bs
->backing_format
[0] != '\0') {
999 back_drv
= bdrv_find_format(bs
->backing_format
);
1002 /* backing files always opened read-only */
1003 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
|
1004 BDRV_O_COPY_ON_READ
);
1006 ret
= bdrv_open(bs
->backing_hd
,
1007 *backing_filename
? backing_filename
: NULL
, options
,
1008 back_flags
, back_drv
, &local_err
);
1010 bdrv_unref(bs
->backing_hd
);
1011 bs
->backing_hd
= NULL
;
1012 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1013 error_setg(errp
, "Could not open backing file: %s",
1014 error_get_pretty(local_err
));
1015 error_free(local_err
);
1018 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
),
1019 bs
->backing_hd
->file
->filename
);
1024 * Opens a disk image (raw, qcow2, vmdk, ...)
1026 * options is a QDict of options to pass to the block drivers, or NULL for an
1027 * empty set of options. The reference to the QDict belongs to the block layer
1028 * after the call (even on failure), so if the caller intends to reuse the
1029 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1031 int bdrv_open(BlockDriverState
*bs
, const char *filename
, QDict
*options
,
1032 int flags
, BlockDriver
*drv
, Error
**errp
)
1035 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1036 char tmp_filename
[PATH_MAX
+ 1];
1037 BlockDriverState
*file
= NULL
;
1038 QDict
*file_options
= NULL
;
1039 const char *drvname
;
1040 Error
*local_err
= NULL
;
1042 /* NULL means an empty set of options */
1043 if (options
== NULL
) {
1044 options
= qdict_new();
1047 bs
->options
= options
;
1048 options
= qdict_clone_shallow(options
);
1050 /* For snapshot=on, create a temporary qcow2 overlay */
1051 if (flags
& BDRV_O_SNAPSHOT
) {
1052 BlockDriverState
*bs1
;
1054 BlockDriver
*bdrv_qcow2
;
1055 QEMUOptionParameter
*create_options
;
1056 char backing_filename
[PATH_MAX
];
1058 if (qdict_size(options
) != 0) {
1059 error_setg(errp
, "Can't use snapshot=on with driver-specific options");
1063 assert(filename
!= NULL
);
1065 /* if snapshot, we create a temporary backing file and open it
1066 instead of opening 'filename' directly */
1068 /* if there is a backing file, use it */
1070 ret
= bdrv_open(bs1
, filename
, NULL
, 0, drv
, &local_err
);
1075 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
1079 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
1081 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1085 /* Real path is meaningless for protocols */
1086 if (path_has_protocol(filename
)) {
1087 snprintf(backing_filename
, sizeof(backing_filename
),
1089 } else if (!realpath(filename
, backing_filename
)) {
1091 error_setg_errno(errp
, errno
, "Could not resolve path '%s'", filename
);
1095 bdrv_qcow2
= bdrv_find_format("qcow2");
1096 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1099 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1100 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FILE
,
1103 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FMT
,
1107 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
, &local_err
);
1108 free_option_parameters(create_options
);
1110 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1111 "'%s': %s", tmp_filename
,
1112 error_get_pretty(local_err
));
1113 error_free(local_err
);
1118 filename
= tmp_filename
;
1120 bs
->is_temporary
= 1;
1123 /* Open image file without format layer */
1124 if (flags
& BDRV_O_RDWR
) {
1125 flags
|= BDRV_O_ALLOW_RDWR
;
1128 qdict_extract_subqdict(options
, &file_options
, "file.");
1130 ret
= bdrv_file_open(&file
, filename
, file_options
,
1131 bdrv_open_flags(bs
, flags
| BDRV_O_UNMAP
), &local_err
);
1136 /* Find the right image format driver */
1137 drvname
= qdict_get_try_str(options
, "driver");
1139 drv
= bdrv_find_format(drvname
);
1140 qdict_del(options
, "driver");
1142 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1144 goto unlink_and_fail
;
1149 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1153 goto unlink_and_fail
;
1156 /* Open the image */
1157 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1159 goto unlink_and_fail
;
1162 if (bs
->file
!= file
) {
1167 /* If there is a backing file, use it */
1168 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1169 QDict
*backing_options
;
1171 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1172 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1174 goto close_and_fail
;
1178 /* Check if any unknown options were used */
1179 if (qdict_size(options
) != 0) {
1180 const QDictEntry
*entry
= qdict_first(options
);
1181 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1182 "support the option '%s'", drv
->format_name
, bs
->device_name
,
1186 goto close_and_fail
;
1190 if (!bdrv_key_required(bs
)) {
1191 bdrv_dev_change_media_cb(bs
, true);
1200 if (bs
->is_temporary
) {
1204 QDECREF(bs
->options
);
1207 if (error_is_set(&local_err
)) {
1208 error_propagate(errp
, local_err
);
1215 if (error_is_set(&local_err
)) {
1216 error_propagate(errp
, local_err
);
1221 typedef struct BlockReopenQueueEntry
{
1223 BDRVReopenState state
;
1224 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1225 } BlockReopenQueueEntry
;
1228 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1229 * reopen of multiple devices.
1231 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1232 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1233 * be created and initialized. This newly created BlockReopenQueue should be
1234 * passed back in for subsequent calls that are intended to be of the same
1237 * bs is the BlockDriverState to add to the reopen queue.
1239 * flags contains the open flags for the associated bs
1241 * returns a pointer to bs_queue, which is either the newly allocated
1242 * bs_queue, or the existing bs_queue being used.
1245 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1246 BlockDriverState
*bs
, int flags
)
1250 BlockReopenQueueEntry
*bs_entry
;
1251 if (bs_queue
== NULL
) {
1252 bs_queue
= g_new0(BlockReopenQueue
, 1);
1253 QSIMPLEQ_INIT(bs_queue
);
1257 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
1260 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1261 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1263 bs_entry
->state
.bs
= bs
;
1264 bs_entry
->state
.flags
= flags
;
1270 * Reopen multiple BlockDriverStates atomically & transactionally.
1272 * The queue passed in (bs_queue) must have been built up previous
1273 * via bdrv_reopen_queue().
1275 * Reopens all BDS specified in the queue, with the appropriate
1276 * flags. All devices are prepared for reopen, and failure of any
1277 * device will cause all device changes to be abandonded, and intermediate
1280 * If all devices prepare successfully, then the changes are committed
1284 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1287 BlockReopenQueueEntry
*bs_entry
, *next
;
1288 Error
*local_err
= NULL
;
1290 assert(bs_queue
!= NULL
);
1294 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1295 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1296 error_propagate(errp
, local_err
);
1299 bs_entry
->prepared
= true;
1302 /* If we reach this point, we have success and just need to apply the
1305 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1306 bdrv_reopen_commit(&bs_entry
->state
);
1312 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1313 if (ret
&& bs_entry
->prepared
) {
1314 bdrv_reopen_abort(&bs_entry
->state
);
1323 /* Reopen a single BlockDriverState with the specified flags. */
1324 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1327 Error
*local_err
= NULL
;
1328 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1330 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1331 if (local_err
!= NULL
) {
1332 error_propagate(errp
, local_err
);
1339 * Prepares a BlockDriverState for reopen. All changes are staged in the
1340 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1341 * the block driver layer .bdrv_reopen_prepare()
1343 * bs is the BlockDriverState to reopen
1344 * flags are the new open flags
1345 * queue is the reopen queue
1347 * Returns 0 on success, non-zero on error. On error errp will be set
1350 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1351 * It is the responsibility of the caller to then call the abort() or
1352 * commit() for any other BDS that have been left in a prepare() state
1355 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1359 Error
*local_err
= NULL
;
1362 assert(reopen_state
!= NULL
);
1363 assert(reopen_state
->bs
->drv
!= NULL
);
1364 drv
= reopen_state
->bs
->drv
;
1366 /* if we are to stay read-only, do not allow permission change
1368 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1369 reopen_state
->flags
& BDRV_O_RDWR
) {
1370 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1371 reopen_state
->bs
->device_name
);
1376 ret
= bdrv_flush(reopen_state
->bs
);
1378 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1383 if (drv
->bdrv_reopen_prepare
) {
1384 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1386 if (local_err
!= NULL
) {
1387 error_propagate(errp
, local_err
);
1389 error_setg(errp
, "failed while preparing to reopen image '%s'",
1390 reopen_state
->bs
->filename
);
1395 /* It is currently mandatory to have a bdrv_reopen_prepare()
1396 * handler for each supported drv. */
1397 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1398 drv
->format_name
, reopen_state
->bs
->device_name
,
1399 "reopening of file");
1411 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1412 * makes them final by swapping the staging BlockDriverState contents into
1413 * the active BlockDriverState contents.
1415 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1419 assert(reopen_state
!= NULL
);
1420 drv
= reopen_state
->bs
->drv
;
1421 assert(drv
!= NULL
);
1423 /* If there are any driver level actions to take */
1424 if (drv
->bdrv_reopen_commit
) {
1425 drv
->bdrv_reopen_commit(reopen_state
);
1428 /* set BDS specific flags now */
1429 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1430 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1432 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1436 * Abort the reopen, and delete and free the staged changes in
1439 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1443 assert(reopen_state
!= NULL
);
1444 drv
= reopen_state
->bs
->drv
;
1445 assert(drv
!= NULL
);
1447 if (drv
->bdrv_reopen_abort
) {
1448 drv
->bdrv_reopen_abort(reopen_state
);
1453 void bdrv_close(BlockDriverState
*bs
)
1456 block_job_cancel_sync(bs
->job
);
1458 bdrv_drain_all(); /* complete I/O */
1460 bdrv_drain_all(); /* in case flush left pending I/O */
1461 notifier_list_notify(&bs
->close_notifiers
, bs
);
1464 if (bs
->backing_hd
) {
1465 bdrv_unref(bs
->backing_hd
);
1466 bs
->backing_hd
= NULL
;
1468 bs
->drv
->bdrv_close(bs
);
1471 if (bs
->is_temporary
) {
1472 unlink(bs
->filename
);
1477 bs
->copy_on_read
= 0;
1478 bs
->backing_file
[0] = '\0';
1479 bs
->backing_format
[0] = '\0';
1480 bs
->total_sectors
= 0;
1485 bs
->zero_beyond_eof
= false;
1486 QDECREF(bs
->options
);
1489 if (bs
->file
!= NULL
) {
1490 bdrv_unref(bs
->file
);
1495 bdrv_dev_change_media_cb(bs
, false);
1497 /*throttling disk I/O limits*/
1498 if (bs
->io_limits_enabled
) {
1499 bdrv_io_limits_disable(bs
);
1503 void bdrv_close_all(void)
1505 BlockDriverState
*bs
;
1507 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1512 /* Check if any requests are in-flight (including throttled requests) */
1513 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1515 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1518 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1521 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1524 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1527 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1533 static bool bdrv_requests_pending_all(void)
1535 BlockDriverState
*bs
;
1536 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1537 if (bdrv_requests_pending(bs
)) {
1545 * Wait for pending requests to complete across all BlockDriverStates
1547 * This function does not flush data to disk, use bdrv_flush_all() for that
1548 * after calling this function.
1550 * Note that completion of an asynchronous I/O operation can trigger any
1551 * number of other I/O operations on other devices---for example a coroutine
1552 * can be arbitrarily complex and a constant flow of I/O can come until the
1553 * coroutine is complete. Because of this, it is not possible to have a
1554 * function to drain a single device's I/O queue.
1556 void bdrv_drain_all(void)
1558 /* Always run first iteration so any pending completion BHs run */
1560 BlockDriverState
*bs
;
1563 /* FIXME: We do not have timer support here, so this is effectively
1566 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1567 if (bdrv_start_throttled_reqs(bs
)) {
1572 busy
= bdrv_requests_pending_all();
1573 busy
|= aio_poll(qemu_get_aio_context(), busy
);
1577 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1578 Also, NULL terminate the device_name to prevent double remove */
1579 void bdrv_make_anon(BlockDriverState
*bs
)
1581 if (bs
->device_name
[0] != '\0') {
1582 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1584 bs
->device_name
[0] = '\0';
1587 static void bdrv_rebind(BlockDriverState
*bs
)
1589 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1590 bs
->drv
->bdrv_rebind(bs
);
1594 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1595 BlockDriverState
*bs_src
)
1597 /* move some fields that need to stay attached to the device */
1598 bs_dest
->open_flags
= bs_src
->open_flags
;
1601 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1602 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1603 bs_dest
->dev
= bs_src
->dev
;
1604 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1605 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1607 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1609 /* i/o throttled req */
1610 memcpy(&bs_dest
->throttle_state
,
1611 &bs_src
->throttle_state
,
1612 sizeof(ThrottleState
));
1613 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1614 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1615 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1618 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1619 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1622 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1623 bs_dest
->iostatus
= bs_src
->iostatus
;
1626 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1628 /* reference count */
1629 bs_dest
->refcnt
= bs_src
->refcnt
;
1632 bs_dest
->in_use
= bs_src
->in_use
;
1633 bs_dest
->job
= bs_src
->job
;
1635 /* keep the same entry in bdrv_states */
1636 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1637 bs_src
->device_name
);
1638 bs_dest
->list
= bs_src
->list
;
1642 * Swap bs contents for two image chains while they are live,
1643 * while keeping required fields on the BlockDriverState that is
1644 * actually attached to a device.
1646 * This will modify the BlockDriverState fields, and swap contents
1647 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1649 * bs_new is required to be anonymous.
1651 * This function does not create any image files.
1653 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1655 BlockDriverState tmp
;
1657 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1658 assert(bs_new
->device_name
[0] == '\0');
1659 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
1660 assert(bs_new
->job
== NULL
);
1661 assert(bs_new
->dev
== NULL
);
1662 assert(bs_new
->in_use
== 0);
1663 assert(bs_new
->io_limits_enabled
== false);
1664 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1670 /* there are some fields that should not be swapped, move them back */
1671 bdrv_move_feature_fields(&tmp
, bs_old
);
1672 bdrv_move_feature_fields(bs_old
, bs_new
);
1673 bdrv_move_feature_fields(bs_new
, &tmp
);
1675 /* bs_new shouldn't be in bdrv_states even after the swap! */
1676 assert(bs_new
->device_name
[0] == '\0');
1678 /* Check a few fields that should remain attached to the device */
1679 assert(bs_new
->dev
== NULL
);
1680 assert(bs_new
->job
== NULL
);
1681 assert(bs_new
->in_use
== 0);
1682 assert(bs_new
->io_limits_enabled
== false);
1683 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1685 bdrv_rebind(bs_new
);
1686 bdrv_rebind(bs_old
);
1690 * Add new bs contents at the top of an image chain while the chain is
1691 * live, while keeping required fields on the top layer.
1693 * This will modify the BlockDriverState fields, and swap contents
1694 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1696 * bs_new is required to be anonymous.
1698 * This function does not create any image files.
1700 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1702 bdrv_swap(bs_new
, bs_top
);
1704 /* The contents of 'tmp' will become bs_top, as we are
1705 * swapping bs_new and bs_top contents. */
1706 bs_top
->backing_hd
= bs_new
;
1707 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1708 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1710 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1711 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1714 static void bdrv_delete(BlockDriverState
*bs
)
1718 assert(!bs
->in_use
);
1719 assert(!bs
->refcnt
);
1720 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
1724 /* remove from list, if necessary */
1730 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1731 /* TODO change to DeviceState *dev when all users are qdevified */
1737 bdrv_iostatus_reset(bs
);
1741 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1742 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1744 if (bdrv_attach_dev(bs
, dev
) < 0) {
1749 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1750 /* TODO change to DeviceState *dev when all users are qdevified */
1752 assert(bs
->dev
== dev
);
1755 bs
->dev_opaque
= NULL
;
1756 bs
->buffer_alignment
= 512;
1759 /* TODO change to return DeviceState * when all users are qdevified */
1760 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1765 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1769 bs
->dev_opaque
= opaque
;
1772 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1773 enum MonitorEvent ev
,
1774 BlockErrorAction action
, bool is_read
)
1777 const char *action_str
;
1780 case BDRV_ACTION_REPORT
:
1781 action_str
= "report";
1783 case BDRV_ACTION_IGNORE
:
1784 action_str
= "ignore";
1786 case BDRV_ACTION_STOP
:
1787 action_str
= "stop";
1793 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1796 is_read
? "read" : "write");
1797 monitor_protocol_event(ev
, data
);
1799 qobject_decref(data
);
1802 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1806 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1807 bdrv_get_device_name(bs
), ejected
);
1808 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1810 qobject_decref(data
);
1813 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1815 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1816 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1817 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1818 if (tray_was_closed
) {
1820 bdrv_emit_qmp_eject_event(bs
, true);
1824 bdrv_emit_qmp_eject_event(bs
, false);
1829 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1831 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1834 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1836 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1837 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1841 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1843 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1844 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1849 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1851 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1852 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1856 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1858 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1859 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1865 * Run consistency checks on an image
1867 * Returns 0 if the check could be completed (it doesn't mean that the image is
1868 * free of errors) or -errno when an internal error occurred. The results of the
1869 * check are stored in res.
1871 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1873 if (bs
->drv
->bdrv_check
== NULL
) {
1877 memset(res
, 0, sizeof(*res
));
1878 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1881 #define COMMIT_BUF_SECTORS 2048
1883 /* commit COW file into the raw image */
1884 int bdrv_commit(BlockDriverState
*bs
)
1886 BlockDriver
*drv
= bs
->drv
;
1887 int64_t sector
, total_sectors
;
1888 int n
, ro
, open_flags
;
1891 char filename
[PATH_MAX
];
1896 if (!bs
->backing_hd
) {
1900 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1904 ro
= bs
->backing_hd
->read_only
;
1905 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1906 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1907 open_flags
= bs
->backing_hd
->open_flags
;
1910 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1915 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1916 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1918 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1919 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
1924 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1929 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1936 if (drv
->bdrv_make_empty
) {
1937 ret
= drv
->bdrv_make_empty(bs
);
1942 * Make sure all data we wrote to the backing device is actually
1946 bdrv_flush(bs
->backing_hd
);
1952 /* ignoring error return here */
1953 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1959 int bdrv_commit_all(void)
1961 BlockDriverState
*bs
;
1963 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1964 if (bs
->drv
&& bs
->backing_hd
) {
1965 int ret
= bdrv_commit(bs
);
1975 * Remove an active request from the tracked requests list
1977 * This function should be called when a tracked request is completing.
1979 static void tracked_request_end(BdrvTrackedRequest
*req
)
1981 QLIST_REMOVE(req
, list
);
1982 qemu_co_queue_restart_all(&req
->wait_queue
);
1986 * Add an active request to the tracked requests list
1988 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1989 BlockDriverState
*bs
,
1991 int nb_sectors
, bool is_write
)
1993 *req
= (BdrvTrackedRequest
){
1995 .sector_num
= sector_num
,
1996 .nb_sectors
= nb_sectors
,
1997 .is_write
= is_write
,
1998 .co
= qemu_coroutine_self(),
2001 qemu_co_queue_init(&req
->wait_queue
);
2003 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2007 * Round a region to cluster boundaries
2009 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2010 int64_t sector_num
, int nb_sectors
,
2011 int64_t *cluster_sector_num
,
2012 int *cluster_nb_sectors
)
2014 BlockDriverInfo bdi
;
2016 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2017 *cluster_sector_num
= sector_num
;
2018 *cluster_nb_sectors
= nb_sectors
;
2020 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2021 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2022 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2027 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2028 int64_t sector_num
, int nb_sectors
) {
2030 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
2034 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
2040 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
2041 int64_t sector_num
, int nb_sectors
)
2043 BdrvTrackedRequest
*req
;
2044 int64_t cluster_sector_num
;
2045 int cluster_nb_sectors
;
2048 /* If we touch the same cluster it counts as an overlap. This guarantees
2049 * that allocating writes will be serialized and not race with each other
2050 * for the same cluster. For example, in copy-on-read it ensures that the
2051 * CoR read and write operations are atomic and guest writes cannot
2052 * interleave between them.
2054 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2055 &cluster_sector_num
, &cluster_nb_sectors
);
2059 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2060 if (tracked_request_overlaps(req
, cluster_sector_num
,
2061 cluster_nb_sectors
)) {
2062 /* Hitting this means there was a reentrant request, for
2063 * example, a block driver issuing nested requests. This must
2064 * never happen since it means deadlock.
2066 assert(qemu_coroutine_self() != req
->co
);
2068 qemu_co_queue_wait(&req
->wait_queue
);
2079 * -EINVAL - backing format specified, but no file
2080 * -ENOSPC - can't update the backing file because no space is left in the
2082 * -ENOTSUP - format driver doesn't support changing the backing file
2084 int bdrv_change_backing_file(BlockDriverState
*bs
,
2085 const char *backing_file
, const char *backing_fmt
)
2087 BlockDriver
*drv
= bs
->drv
;
2090 /* Backing file format doesn't make sense without a backing file */
2091 if (backing_fmt
&& !backing_file
) {
2095 if (drv
->bdrv_change_backing_file
!= NULL
) {
2096 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2102 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2103 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2109 * Finds the image layer in the chain that has 'bs' as its backing file.
2111 * active is the current topmost image.
2113 * Returns NULL if bs is not found in active's image chain,
2114 * or if active == bs.
2116 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2117 BlockDriverState
*bs
)
2119 BlockDriverState
*overlay
= NULL
;
2120 BlockDriverState
*intermediate
;
2122 assert(active
!= NULL
);
2125 /* if bs is the same as active, then by definition it has no overlay
2131 intermediate
= active
;
2132 while (intermediate
->backing_hd
) {
2133 if (intermediate
->backing_hd
== bs
) {
2134 overlay
= intermediate
;
2137 intermediate
= intermediate
->backing_hd
;
2143 typedef struct BlkIntermediateStates
{
2144 BlockDriverState
*bs
;
2145 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2146 } BlkIntermediateStates
;
2150 * Drops images above 'base' up to and including 'top', and sets the image
2151 * above 'top' to have base as its backing file.
2153 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2154 * information in 'bs' can be properly updated.
2156 * E.g., this will convert the following chain:
2157 * bottom <- base <- intermediate <- top <- active
2161 * bottom <- base <- active
2163 * It is allowed for bottom==base, in which case it converts:
2165 * base <- intermediate <- top <- active
2172 * if active == top, that is considered an error
2175 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2176 BlockDriverState
*base
)
2178 BlockDriverState
*intermediate
;
2179 BlockDriverState
*base_bs
= NULL
;
2180 BlockDriverState
*new_top_bs
= NULL
;
2181 BlkIntermediateStates
*intermediate_state
, *next
;
2184 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2185 QSIMPLEQ_INIT(&states_to_delete
);
2187 if (!top
->drv
|| !base
->drv
) {
2191 new_top_bs
= bdrv_find_overlay(active
, top
);
2193 if (new_top_bs
== NULL
) {
2194 /* we could not find the image above 'top', this is an error */
2198 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2199 * to do, no intermediate images */
2200 if (new_top_bs
->backing_hd
== base
) {
2207 /* now we will go down through the list, and add each BDS we find
2208 * into our deletion queue, until we hit the 'base'
2210 while (intermediate
) {
2211 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2212 intermediate_state
->bs
= intermediate
;
2213 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2215 if (intermediate
->backing_hd
== base
) {
2216 base_bs
= intermediate
->backing_hd
;
2219 intermediate
= intermediate
->backing_hd
;
2221 if (base_bs
== NULL
) {
2222 /* something went wrong, we did not end at the base. safely
2223 * unravel everything, and exit with error */
2227 /* success - we can delete the intermediate states, and link top->base */
2228 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2229 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2233 new_top_bs
->backing_hd
= base_bs
;
2236 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2237 /* so that bdrv_close() does not recursively close the chain */
2238 intermediate_state
->bs
->backing_hd
= NULL
;
2239 bdrv_unref(intermediate_state
->bs
);
2244 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2245 g_free(intermediate_state
);
2251 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2256 if (!bdrv_is_inserted(bs
))
2262 len
= bdrv_getlength(bs
);
2267 if ((offset
> len
) || (len
- offset
< size
))
2273 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2276 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2277 nb_sectors
* BDRV_SECTOR_SIZE
);
2280 typedef struct RwCo
{
2281 BlockDriverState
*bs
;
2287 BdrvRequestFlags flags
;
2290 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2292 RwCo
*rwco
= opaque
;
2294 if (!rwco
->is_write
) {
2295 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
2296 rwco
->nb_sectors
, rwco
->qiov
,
2299 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
2300 rwco
->nb_sectors
, rwco
->qiov
,
2306 * Process a vectored synchronous request using coroutines
2308 static int bdrv_rwv_co(BlockDriverState
*bs
, int64_t sector_num
,
2309 QEMUIOVector
*qiov
, bool is_write
,
2310 BdrvRequestFlags flags
)
2315 .sector_num
= sector_num
,
2316 .nb_sectors
= qiov
->size
>> BDRV_SECTOR_BITS
,
2318 .is_write
= is_write
,
2322 assert((qiov
->size
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2325 * In sync call context, when the vcpu is blocked, this throttling timer
2326 * will not fire; so the I/O throttling function has to be disabled here
2327 * if it has been enabled.
2329 if (bs
->io_limits_enabled
) {
2330 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2331 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2332 bdrv_io_limits_disable(bs
);
2335 if (qemu_in_coroutine()) {
2336 /* Fast-path if already in coroutine context */
2337 bdrv_rw_co_entry(&rwco
);
2339 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2340 qemu_coroutine_enter(co
, &rwco
);
2341 while (rwco
.ret
== NOT_DONE
) {
2349 * Process a synchronous request using coroutines
2351 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2352 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2355 struct iovec iov
= {
2356 .iov_base
= (void *)buf
,
2357 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2360 qemu_iovec_init_external(&qiov
, &iov
, 1);
2361 return bdrv_rwv_co(bs
, sector_num
, &qiov
, is_write
, flags
);
2364 /* return < 0 if error. See bdrv_write() for the return codes */
2365 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2366 uint8_t *buf
, int nb_sectors
)
2368 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2371 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2372 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2373 uint8_t *buf
, int nb_sectors
)
2378 enabled
= bs
->io_limits_enabled
;
2379 bs
->io_limits_enabled
= false;
2380 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2381 bs
->io_limits_enabled
= enabled
;
2385 /* Return < 0 if error. Important errors are:
2386 -EIO generic I/O error (may happen for all errors)
2387 -ENOMEDIUM No media inserted.
2388 -EINVAL Invalid sector number or nb_sectors
2389 -EACCES Trying to write a read-only device
2391 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2392 const uint8_t *buf
, int nb_sectors
)
2394 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2397 int bdrv_writev(BlockDriverState
*bs
, int64_t sector_num
, QEMUIOVector
*qiov
)
2399 return bdrv_rwv_co(bs
, sector_num
, qiov
, true, 0);
2402 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2403 int nb_sectors
, BdrvRequestFlags flags
)
2405 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2406 BDRV_REQ_ZERO_WRITE
| flags
);
2410 * Completely zero out a block device with the help of bdrv_write_zeroes.
2411 * The operation is sped up by checking the block status and only writing
2412 * zeroes to the device if they currently do not return zeroes. Optional
2413 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2415 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2417 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2419 int64_t target_size
= bdrv_getlength(bs
) / BDRV_SECTOR_SIZE
;
2420 int64_t ret
, nb_sectors
, sector_num
= 0;
2424 nb_sectors
= target_size
- sector_num
;
2425 if (nb_sectors
<= 0) {
2428 if (nb_sectors
> INT_MAX
) {
2429 nb_sectors
= INT_MAX
;
2431 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2432 if (ret
& BDRV_BLOCK_ZERO
) {
2436 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2438 error_report("error writing zeroes at sector %" PRId64
": %s",
2439 sector_num
, strerror(-ret
));
2446 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2447 void *buf
, int count1
)
2449 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2450 int len
, nb_sectors
, count
;
2455 /* first read to align to sector start */
2456 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2459 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2461 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2463 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2471 /* read the sectors "in place" */
2472 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2473 if (nb_sectors
> 0) {
2474 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2476 sector_num
+= nb_sectors
;
2477 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2482 /* add data from the last sector */
2484 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2486 memcpy(buf
, tmp_buf
, count
);
2491 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2493 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2494 int len
, nb_sectors
, count
;
2500 /* first write to align to sector start */
2501 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2504 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2506 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2508 qemu_iovec_to_buf(qiov
, 0, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)),
2510 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2518 /* write the sectors "in place" */
2519 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2520 if (nb_sectors
> 0) {
2521 QEMUIOVector qiov_inplace
;
2523 qemu_iovec_init(&qiov_inplace
, qiov
->niov
);
2524 qemu_iovec_concat(&qiov_inplace
, qiov
, len
,
2525 nb_sectors
<< BDRV_SECTOR_BITS
);
2526 ret
= bdrv_writev(bs
, sector_num
, &qiov_inplace
);
2527 qemu_iovec_destroy(&qiov_inplace
);
2532 sector_num
+= nb_sectors
;
2533 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2537 /* add data from the last sector */
2539 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2541 qemu_iovec_to_buf(qiov
, qiov
->size
- count
, tmp_buf
, count
);
2542 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2548 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2549 const void *buf
, int count1
)
2552 struct iovec iov
= {
2553 .iov_base
= (void *) buf
,
2557 qemu_iovec_init_external(&qiov
, &iov
, 1);
2558 return bdrv_pwritev(bs
, offset
, &qiov
);
2562 * Writes to the file and ensures that no writes are reordered across this
2563 * request (acts as a barrier)
2565 * Returns 0 on success, -errno in error cases.
2567 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2568 const void *buf
, int count
)
2572 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2577 /* No flush needed for cache modes that already do it */
2578 if (bs
->enable_write_cache
) {
2585 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2586 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2588 /* Perform I/O through a temporary buffer so that users who scribble over
2589 * their read buffer while the operation is in progress do not end up
2590 * modifying the image file. This is critical for zero-copy guest I/O
2591 * where anything might happen inside guest memory.
2593 void *bounce_buffer
;
2595 BlockDriver
*drv
= bs
->drv
;
2597 QEMUIOVector bounce_qiov
;
2598 int64_t cluster_sector_num
;
2599 int cluster_nb_sectors
;
2603 /* Cover entire cluster so no additional backing file I/O is required when
2604 * allocating cluster in the image file.
2606 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2607 &cluster_sector_num
, &cluster_nb_sectors
);
2609 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2610 cluster_sector_num
, cluster_nb_sectors
);
2612 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2613 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2614 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2616 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2622 if (drv
->bdrv_co_write_zeroes
&&
2623 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2624 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2625 cluster_nb_sectors
, 0);
2627 /* This does not change the data on the disk, it is not necessary
2628 * to flush even in cache=writethrough mode.
2630 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2635 /* It might be okay to ignore write errors for guest requests. If this
2636 * is a deliberate copy-on-read then we don't want to ignore the error.
2637 * Simply report it in all cases.
2642 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2643 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2644 nb_sectors
* BDRV_SECTOR_SIZE
);
2647 qemu_vfree(bounce_buffer
);
2652 * Handle a read request in coroutine context
2654 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2655 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2656 BdrvRequestFlags flags
)
2658 BlockDriver
*drv
= bs
->drv
;
2659 BdrvTrackedRequest req
;
2665 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2669 if (bs
->copy_on_read
) {
2670 flags
|= BDRV_REQ_COPY_ON_READ
;
2672 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2673 bs
->copy_on_read_in_flight
++;
2676 if (bs
->copy_on_read_in_flight
) {
2677 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2680 /* throttling disk I/O */
2681 if (bs
->io_limits_enabled
) {
2682 bdrv_io_limits_intercept(bs
, nb_sectors
, false);
2685 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2687 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2690 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2695 if (!ret
|| pnum
!= nb_sectors
) {
2696 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2701 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
2702 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2704 /* Read zeros after EOF of growable BDSes */
2705 int64_t len
, total_sectors
, max_nb_sectors
;
2707 len
= bdrv_getlength(bs
);
2713 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
2714 max_nb_sectors
= MAX(0, total_sectors
- sector_num
);
2715 if (max_nb_sectors
> 0) {
2716 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
2717 MIN(nb_sectors
, max_nb_sectors
), qiov
);
2722 /* Reading beyond end of file is supposed to produce zeroes */
2723 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
2724 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
2725 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
2727 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
2732 tracked_request_end(&req
);
2734 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2735 bs
->copy_on_read_in_flight
--;
2741 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2742 int nb_sectors
, QEMUIOVector
*qiov
)
2744 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2746 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2749 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2750 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2752 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2754 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2755 BDRV_REQ_COPY_ON_READ
);
2758 /* if no limit is specified in the BlockLimits use a default
2759 * of 32768 512-byte sectors (16 MiB) per request.
2761 #define MAX_WRITE_ZEROES_DEFAULT 32768
2763 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2764 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
2766 BlockDriver
*drv
= bs
->drv
;
2768 struct iovec iov
= {0};
2771 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
2772 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
2774 while (nb_sectors
> 0 && !ret
) {
2775 int num
= nb_sectors
;
2778 if (bs
->bl
.write_zeroes_alignment
&&
2779 num
>= bs
->bl
.write_zeroes_alignment
&&
2780 sector_num
% bs
->bl
.write_zeroes_alignment
) {
2781 if (num
> bs
->bl
.write_zeroes_alignment
) {
2782 num
= bs
->bl
.write_zeroes_alignment
;
2784 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
2787 /* limit request size */
2788 if (num
> max_write_zeroes
) {
2789 num
= max_write_zeroes
;
2793 /* First try the efficient write zeroes operation */
2794 if (drv
->bdrv_co_write_zeroes
) {
2795 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
2798 if (ret
== -ENOTSUP
) {
2799 /* Fall back to bounce buffer if write zeroes is unsupported */
2800 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
2801 if (iov
.iov_base
== NULL
) {
2802 /* allocate bounce buffer only once and ensure that it
2803 * is big enough for this and all future requests.
2805 size_t bufsize
= num
<= nb_sectors
? num
: max_write_zeroes
;
2806 iov
.iov_base
= qemu_blockalign(bs
, bufsize
* BDRV_SECTOR_SIZE
);
2807 memset(iov
.iov_base
, 0, bufsize
* BDRV_SECTOR_SIZE
);
2809 qemu_iovec_init_external(&qiov
, &iov
, 1);
2811 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
2818 qemu_vfree(iov
.iov_base
);
2823 * Handle a write request in coroutine context
2825 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2826 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2827 BdrvRequestFlags flags
)
2829 BlockDriver
*drv
= bs
->drv
;
2830 BdrvTrackedRequest req
;
2836 if (bs
->read_only
) {
2839 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2843 if (bs
->copy_on_read_in_flight
) {
2844 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2847 /* throttling disk I/O */
2848 if (bs
->io_limits_enabled
) {
2849 bdrv_io_limits_intercept(bs
, nb_sectors
, true);
2852 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2854 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, &req
);
2857 /* Do nothing, write notifier decided to fail this request */
2858 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
2859 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
2861 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2864 if (ret
== 0 && !bs
->enable_write_cache
) {
2865 ret
= bdrv_co_flush(bs
);
2868 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2870 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2871 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2873 if (bs
->growable
&& ret
>= 0) {
2874 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
2877 tracked_request_end(&req
);
2882 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2883 int nb_sectors
, QEMUIOVector
*qiov
)
2885 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2887 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2890 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2891 int64_t sector_num
, int nb_sectors
,
2892 BdrvRequestFlags flags
)
2894 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2896 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
2897 flags
&= ~BDRV_REQ_MAY_UNMAP
;
2900 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2901 BDRV_REQ_ZERO_WRITE
| flags
);
2905 * Truncate file to 'offset' bytes (needed only for file protocols)
2907 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2909 BlockDriver
*drv
= bs
->drv
;
2913 if (!drv
->bdrv_truncate
)
2917 if (bdrv_in_use(bs
))
2919 ret
= drv
->bdrv_truncate(bs
, offset
);
2921 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2922 bdrv_dev_resize_cb(bs
);
2928 * Length of a allocated file in bytes. Sparse files are counted by actual
2929 * allocated space. Return < 0 if error or unknown.
2931 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2933 BlockDriver
*drv
= bs
->drv
;
2937 if (drv
->bdrv_get_allocated_file_size
) {
2938 return drv
->bdrv_get_allocated_file_size(bs
);
2941 return bdrv_get_allocated_file_size(bs
->file
);
2947 * Length of a file in bytes. Return < 0 if error or unknown.
2949 int64_t bdrv_getlength(BlockDriverState
*bs
)
2951 BlockDriver
*drv
= bs
->drv
;
2955 if (drv
->has_variable_length
) {
2956 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
2961 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2964 /* return 0 as number of sectors if no device present or error */
2965 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2968 length
= bdrv_getlength(bs
);
2972 length
= length
>> BDRV_SECTOR_BITS
;
2973 *nb_sectors_ptr
= length
;
2976 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2977 BlockdevOnError on_write_error
)
2979 bs
->on_read_error
= on_read_error
;
2980 bs
->on_write_error
= on_write_error
;
2983 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2985 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2988 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2990 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2993 case BLOCKDEV_ON_ERROR_ENOSPC
:
2994 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2995 case BLOCKDEV_ON_ERROR_STOP
:
2996 return BDRV_ACTION_STOP
;
2997 case BLOCKDEV_ON_ERROR_REPORT
:
2998 return BDRV_ACTION_REPORT
;
2999 case BLOCKDEV_ON_ERROR_IGNORE
:
3000 return BDRV_ACTION_IGNORE
;
3006 /* This is done by device models because, while the block layer knows
3007 * about the error, it does not know whether an operation comes from
3008 * the device or the block layer (from a job, for example).
3010 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3011 bool is_read
, int error
)
3014 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3015 if (action
== BDRV_ACTION_STOP
) {
3016 vm_stop(RUN_STATE_IO_ERROR
);
3017 bdrv_iostatus_set_err(bs
, error
);
3021 int bdrv_is_read_only(BlockDriverState
*bs
)
3023 return bs
->read_only
;
3026 int bdrv_is_sg(BlockDriverState
*bs
)
3031 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3033 return bs
->enable_write_cache
;
3036 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3038 bs
->enable_write_cache
= wce
;
3040 /* so a reopen() will preserve wce */
3042 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3044 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3048 int bdrv_is_encrypted(BlockDriverState
*bs
)
3050 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3052 return bs
->encrypted
;
3055 int bdrv_key_required(BlockDriverState
*bs
)
3057 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3059 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3061 return (bs
->encrypted
&& !bs
->valid_key
);
3064 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3067 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3068 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3074 if (!bs
->encrypted
) {
3076 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3079 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3082 } else if (!bs
->valid_key
) {
3084 /* call the change callback now, we skipped it on open */
3085 bdrv_dev_change_media_cb(bs
, true);
3090 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3092 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3095 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3100 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3101 it(opaque
, drv
->format_name
);
3105 BlockDriverState
*bdrv_find(const char *name
)
3107 BlockDriverState
*bs
;
3109 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
3110 if (!strcmp(name
, bs
->device_name
)) {
3117 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3120 return QTAILQ_FIRST(&bdrv_states
);
3122 return QTAILQ_NEXT(bs
, list
);
3125 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3127 BlockDriverState
*bs
;
3129 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
3134 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3136 return bs
->device_name
;
3139 int bdrv_get_flags(BlockDriverState
*bs
)
3141 return bs
->open_flags
;
3144 int bdrv_flush_all(void)
3146 BlockDriverState
*bs
;
3149 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
3150 int ret
= bdrv_flush(bs
);
3151 if (ret
< 0 && !result
) {
3159 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3164 int bdrv_has_zero_init(BlockDriverState
*bs
)
3168 /* If BS is a copy on write image, it is initialized to
3169 the contents of the base image, which may not be zeroes. */
3170 if (bs
->backing_hd
) {
3173 if (bs
->drv
->bdrv_has_zero_init
) {
3174 return bs
->drv
->bdrv_has_zero_init(bs
);
3181 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3183 BlockDriverInfo bdi
;
3185 if (bs
->backing_hd
) {
3189 if (bdrv_get_info(bs
, &bdi
) == 0) {
3190 return bdi
.unallocated_blocks_are_zero
;
3196 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3198 BlockDriverInfo bdi
;
3200 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3204 if (bdrv_get_info(bs
, &bdi
) == 0) {
3205 return bdi
.can_write_zeroes_with_unmap
;
3211 typedef struct BdrvCoGetBlockStatusData
{
3212 BlockDriverState
*bs
;
3213 BlockDriverState
*base
;
3219 } BdrvCoGetBlockStatusData
;
3222 * Returns true iff the specified sector is present in the disk image. Drivers
3223 * not implementing the functionality are assumed to not support backing files,
3224 * hence all their sectors are reported as allocated.
3226 * If 'sector_num' is beyond the end of the disk image the return value is 0
3227 * and 'pnum' is set to 0.
3229 * 'pnum' is set to the number of sectors (including and immediately following
3230 * the specified sector) that are known to be in the same
3231 * allocated/unallocated state.
3233 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3234 * beyond the end of the disk image it will be clamped.
3236 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3238 int nb_sectors
, int *pnum
)
3244 length
= bdrv_getlength(bs
);
3249 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3254 n
= bs
->total_sectors
- sector_num
;
3255 if (n
< nb_sectors
) {
3259 if (!bs
->drv
->bdrv_co_get_block_status
) {
3261 ret
= BDRV_BLOCK_DATA
;
3262 if (bs
->drv
->protocol_name
) {
3263 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3268 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3274 if (ret
& BDRV_BLOCK_RAW
) {
3275 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3276 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3280 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3281 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3282 ret
|= BDRV_BLOCK_ZERO
;
3283 } else if (bs
->backing_hd
) {
3284 BlockDriverState
*bs2
= bs
->backing_hd
;
3285 int64_t length2
= bdrv_getlength(bs2
);
3286 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3287 ret
|= BDRV_BLOCK_ZERO
;
3293 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3294 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3295 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3298 /* Ignore errors. This is just providing extra information, it
3299 * is useful but not necessary.
3301 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
3308 /* Coroutine wrapper for bdrv_get_block_status() */
3309 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
3311 BdrvCoGetBlockStatusData
*data
= opaque
;
3312 BlockDriverState
*bs
= data
->bs
;
3314 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
3320 * Synchronous wrapper around bdrv_co_get_block_status().
3322 * See bdrv_co_get_block_status() for details.
3324 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
3325 int nb_sectors
, int *pnum
)
3328 BdrvCoGetBlockStatusData data
= {
3330 .sector_num
= sector_num
,
3331 .nb_sectors
= nb_sectors
,
3336 if (qemu_in_coroutine()) {
3337 /* Fast-path if already in coroutine context */
3338 bdrv_get_block_status_co_entry(&data
);
3340 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
3341 qemu_coroutine_enter(co
, &data
);
3342 while (!data
.done
) {
3349 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
3350 int nb_sectors
, int *pnum
)
3352 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3357 (ret
& BDRV_BLOCK_DATA
) ||
3358 ((ret
& BDRV_BLOCK_ZERO
) && !bdrv_has_zero_init(bs
));
3362 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3364 * Return true if the given sector is allocated in any image between
3365 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3366 * sector is allocated in any image of the chain. Return false otherwise.
3368 * 'pnum' is set to the number of sectors (including and immediately following
3369 * the specified sector) that are known to be in the same
3370 * allocated/unallocated state.
3373 int bdrv_is_allocated_above(BlockDriverState
*top
,
3374 BlockDriverState
*base
,
3376 int nb_sectors
, int *pnum
)
3378 BlockDriverState
*intermediate
;
3379 int ret
, n
= nb_sectors
;
3382 while (intermediate
&& intermediate
!= base
) {
3384 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
3394 * [sector_num, nb_sectors] is unallocated on top but intermediate
3397 * [sector_num+x, nr_sectors] allocated.
3399 if (n
> pnum_inter
&&
3400 (intermediate
== top
||
3401 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
3405 intermediate
= intermediate
->backing_hd
;
3412 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
3414 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3415 return bs
->backing_file
;
3416 else if (bs
->encrypted
)
3417 return bs
->filename
;
3422 void bdrv_get_backing_filename(BlockDriverState
*bs
,
3423 char *filename
, int filename_size
)
3425 pstrcpy(filename
, filename_size
, bs
->backing_file
);
3428 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
3429 const uint8_t *buf
, int nb_sectors
)
3431 BlockDriver
*drv
= bs
->drv
;
3434 if (!drv
->bdrv_write_compressed
)
3436 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3439 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
3441 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3444 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3446 BlockDriver
*drv
= bs
->drv
;
3449 if (!drv
->bdrv_get_info
)
3451 memset(bdi
, 0, sizeof(*bdi
));
3452 return drv
->bdrv_get_info(bs
, bdi
);
3455 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
3457 BlockDriver
*drv
= bs
->drv
;
3458 if (drv
&& drv
->bdrv_get_specific_info
) {
3459 return drv
->bdrv_get_specific_info(bs
);
3464 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3465 int64_t pos
, int size
)
3468 struct iovec iov
= {
3469 .iov_base
= (void *) buf
,
3473 qemu_iovec_init_external(&qiov
, &iov
, 1);
3474 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
3477 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
3479 BlockDriver
*drv
= bs
->drv
;
3483 } else if (drv
->bdrv_save_vmstate
) {
3484 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
3485 } else if (bs
->file
) {
3486 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
3492 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3493 int64_t pos
, int size
)
3495 BlockDriver
*drv
= bs
->drv
;
3498 if (drv
->bdrv_load_vmstate
)
3499 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3501 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3505 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3507 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
3511 bs
->drv
->bdrv_debug_event(bs
, event
);
3514 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3517 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3521 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3522 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3528 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3530 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3534 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3535 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3541 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3543 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3547 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3548 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3554 int bdrv_is_snapshot(BlockDriverState
*bs
)
3556 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3559 /* backing_file can either be relative, or absolute, or a protocol. If it is
3560 * relative, it must be relative to the chain. So, passing in bs->filename
3561 * from a BDS as backing_file should not be done, as that may be relative to
3562 * the CWD rather than the chain. */
3563 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3564 const char *backing_file
)
3566 char *filename_full
= NULL
;
3567 char *backing_file_full
= NULL
;
3568 char *filename_tmp
= NULL
;
3569 int is_protocol
= 0;
3570 BlockDriverState
*curr_bs
= NULL
;
3571 BlockDriverState
*retval
= NULL
;
3573 if (!bs
|| !bs
->drv
|| !backing_file
) {
3577 filename_full
= g_malloc(PATH_MAX
);
3578 backing_file_full
= g_malloc(PATH_MAX
);
3579 filename_tmp
= g_malloc(PATH_MAX
);
3581 is_protocol
= path_has_protocol(backing_file
);
3583 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3585 /* If either of the filename paths is actually a protocol, then
3586 * compare unmodified paths; otherwise make paths relative */
3587 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3588 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3589 retval
= curr_bs
->backing_hd
;
3593 /* If not an absolute filename path, make it relative to the current
3594 * image's filename path */
3595 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3598 /* We are going to compare absolute pathnames */
3599 if (!realpath(filename_tmp
, filename_full
)) {
3603 /* We need to make sure the backing filename we are comparing against
3604 * is relative to the current image filename (or absolute) */
3605 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3606 curr_bs
->backing_file
);
3608 if (!realpath(filename_tmp
, backing_file_full
)) {
3612 if (strcmp(backing_file_full
, filename_full
) == 0) {
3613 retval
= curr_bs
->backing_hd
;
3619 g_free(filename_full
);
3620 g_free(backing_file_full
);
3621 g_free(filename_tmp
);
3625 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3631 if (!bs
->backing_hd
) {
3635 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3638 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3640 BlockDriverState
*curr_bs
= NULL
;
3648 while (curr_bs
->backing_hd
) {
3649 curr_bs
= curr_bs
->backing_hd
;
3654 /**************************************************************/
3657 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3658 QEMUIOVector
*qiov
, int nb_sectors
,
3659 BlockDriverCompletionFunc
*cb
, void *opaque
)
3661 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3663 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3667 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3668 QEMUIOVector
*qiov
, int nb_sectors
,
3669 BlockDriverCompletionFunc
*cb
, void *opaque
)
3671 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3673 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3678 typedef struct MultiwriteCB
{
3683 BlockDriverCompletionFunc
*cb
;
3685 QEMUIOVector
*free_qiov
;
3689 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3693 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3694 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3695 if (mcb
->callbacks
[i
].free_qiov
) {
3696 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3698 g_free(mcb
->callbacks
[i
].free_qiov
);
3702 static void multiwrite_cb(void *opaque
, int ret
)
3704 MultiwriteCB
*mcb
= opaque
;
3706 trace_multiwrite_cb(mcb
, ret
);
3708 if (ret
< 0 && !mcb
->error
) {
3712 mcb
->num_requests
--;
3713 if (mcb
->num_requests
== 0) {
3714 multiwrite_user_cb(mcb
);
3719 static int multiwrite_req_compare(const void *a
, const void *b
)
3721 const BlockRequest
*req1
= a
, *req2
= b
;
3724 * Note that we can't simply subtract req2->sector from req1->sector
3725 * here as that could overflow the return value.
3727 if (req1
->sector
> req2
->sector
) {
3729 } else if (req1
->sector
< req2
->sector
) {
3737 * Takes a bunch of requests and tries to merge them. Returns the number of
3738 * requests that remain after merging.
3740 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3741 int num_reqs
, MultiwriteCB
*mcb
)
3745 // Sort requests by start sector
3746 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3748 // Check if adjacent requests touch the same clusters. If so, combine them,
3749 // filling up gaps with zero sectors.
3751 for (i
= 1; i
< num_reqs
; i
++) {
3753 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3755 // Handle exactly sequential writes and overlapping writes.
3756 if (reqs
[i
].sector
<= oldreq_last
) {
3760 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3766 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3767 qemu_iovec_init(qiov
,
3768 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3770 // Add the first request to the merged one. If the requests are
3771 // overlapping, drop the last sectors of the first request.
3772 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3773 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3775 // We should need to add any zeros between the two requests
3776 assert (reqs
[i
].sector
<= oldreq_last
);
3778 // Add the second request
3779 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3781 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3782 reqs
[outidx
].qiov
= qiov
;
3784 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3787 reqs
[outidx
].sector
= reqs
[i
].sector
;
3788 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3789 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3797 * Submit multiple AIO write requests at once.
3799 * On success, the function returns 0 and all requests in the reqs array have
3800 * been submitted. In error case this function returns -1, and any of the
3801 * requests may or may not be submitted yet. In particular, this means that the
3802 * callback will be called for some of the requests, for others it won't. The
3803 * caller must check the error field of the BlockRequest to wait for the right
3804 * callbacks (if error != 0, no callback will be called).
3806 * The implementation may modify the contents of the reqs array, e.g. to merge
3807 * requests. However, the fields opaque and error are left unmodified as they
3808 * are used to signal failure for a single request to the caller.
3810 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3815 /* don't submit writes if we don't have a medium */
3816 if (bs
->drv
== NULL
) {
3817 for (i
= 0; i
< num_reqs
; i
++) {
3818 reqs
[i
].error
= -ENOMEDIUM
;
3823 if (num_reqs
== 0) {
3827 // Create MultiwriteCB structure
3828 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3829 mcb
->num_requests
= 0;
3830 mcb
->num_callbacks
= num_reqs
;
3832 for (i
= 0; i
< num_reqs
; i
++) {
3833 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3834 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3837 // Check for mergable requests
3838 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3840 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3842 /* Run the aio requests. */
3843 mcb
->num_requests
= num_reqs
;
3844 for (i
= 0; i
< num_reqs
; i
++) {
3845 bdrv_aio_writev(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3846 reqs
[i
].nb_sectors
, multiwrite_cb
, mcb
);
3852 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3854 acb
->aiocb_info
->cancel(acb
);
3857 /**************************************************************/
3858 /* async block device emulation */
3860 typedef struct BlockDriverAIOCBSync
{
3861 BlockDriverAIOCB common
;
3864 /* vector translation state */
3868 } BlockDriverAIOCBSync
;
3870 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3872 BlockDriverAIOCBSync
*acb
=
3873 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3874 qemu_bh_delete(acb
->bh
);
3876 qemu_aio_release(acb
);
3879 static const AIOCBInfo bdrv_em_aiocb_info
= {
3880 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3881 .cancel
= bdrv_aio_cancel_em
,
3884 static void bdrv_aio_bh_cb(void *opaque
)
3886 BlockDriverAIOCBSync
*acb
= opaque
;
3889 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3890 qemu_vfree(acb
->bounce
);
3891 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3892 qemu_bh_delete(acb
->bh
);
3894 qemu_aio_release(acb
);
3897 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3901 BlockDriverCompletionFunc
*cb
,
3906 BlockDriverAIOCBSync
*acb
;
3908 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3909 acb
->is_write
= is_write
;
3911 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3912 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3915 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3916 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3918 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3921 qemu_bh_schedule(acb
->bh
);
3923 return &acb
->common
;
3926 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3927 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3928 BlockDriverCompletionFunc
*cb
, void *opaque
)
3930 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3933 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3934 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3935 BlockDriverCompletionFunc
*cb
, void *opaque
)
3937 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3941 typedef struct BlockDriverAIOCBCoroutine
{
3942 BlockDriverAIOCB common
;
3947 } BlockDriverAIOCBCoroutine
;
3949 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3951 BlockDriverAIOCBCoroutine
*acb
=
3952 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3961 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3962 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3963 .cancel
= bdrv_aio_co_cancel_em
,
3966 static void bdrv_co_em_bh(void *opaque
)
3968 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3970 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
3976 qemu_bh_delete(acb
->bh
);
3977 qemu_aio_release(acb
);
3980 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3981 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
3983 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3984 BlockDriverState
*bs
= acb
->common
.bs
;
3986 if (!acb
->is_write
) {
3987 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
3988 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3990 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
3991 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3994 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3995 qemu_bh_schedule(acb
->bh
);
3998 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4002 BlockDriverCompletionFunc
*cb
,
4007 BlockDriverAIOCBCoroutine
*acb
;
4009 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4010 acb
->req
.sector
= sector_num
;
4011 acb
->req
.nb_sectors
= nb_sectors
;
4012 acb
->req
.qiov
= qiov
;
4013 acb
->is_write
= is_write
;
4016 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4017 qemu_coroutine_enter(co
, acb
);
4019 return &acb
->common
;
4022 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4024 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4025 BlockDriverState
*bs
= acb
->common
.bs
;
4027 acb
->req
.error
= bdrv_co_flush(bs
);
4028 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4029 qemu_bh_schedule(acb
->bh
);
4032 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4033 BlockDriverCompletionFunc
*cb
, void *opaque
)
4035 trace_bdrv_aio_flush(bs
, opaque
);
4038 BlockDriverAIOCBCoroutine
*acb
;
4040 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4043 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4044 qemu_coroutine_enter(co
, acb
);
4046 return &acb
->common
;
4049 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4051 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4052 BlockDriverState
*bs
= acb
->common
.bs
;
4054 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4055 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4056 qemu_bh_schedule(acb
->bh
);
4059 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4060 int64_t sector_num
, int nb_sectors
,
4061 BlockDriverCompletionFunc
*cb
, void *opaque
)
4064 BlockDriverAIOCBCoroutine
*acb
;
4066 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4068 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4069 acb
->req
.sector
= sector_num
;
4070 acb
->req
.nb_sectors
= nb_sectors
;
4072 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4073 qemu_coroutine_enter(co
, acb
);
4075 return &acb
->common
;
4078 void bdrv_init(void)
4080 module_call_init(MODULE_INIT_BLOCK
);
4083 void bdrv_init_with_whitelist(void)
4085 use_bdrv_whitelist
= 1;
4089 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4090 BlockDriverCompletionFunc
*cb
, void *opaque
)
4092 BlockDriverAIOCB
*acb
;
4094 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4095 acb
->aiocb_info
= aiocb_info
;
4098 acb
->opaque
= opaque
;
4102 void qemu_aio_release(void *p
)
4104 BlockDriverAIOCB
*acb
= p
;
4105 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4108 /**************************************************************/
4109 /* Coroutine block device emulation */
4111 typedef struct CoroutineIOCompletion
{
4112 Coroutine
*coroutine
;
4114 } CoroutineIOCompletion
;
4116 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4118 CoroutineIOCompletion
*co
= opaque
;
4121 qemu_coroutine_enter(co
->coroutine
, NULL
);
4124 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4125 int nb_sectors
, QEMUIOVector
*iov
,
4128 CoroutineIOCompletion co
= {
4129 .coroutine
= qemu_coroutine_self(),
4131 BlockDriverAIOCB
*acb
;
4134 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4135 bdrv_co_io_em_complete
, &co
);
4137 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4138 bdrv_co_io_em_complete
, &co
);
4141 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4145 qemu_coroutine_yield();
4150 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4151 int64_t sector_num
, int nb_sectors
,
4154 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4157 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4158 int64_t sector_num
, int nb_sectors
,
4161 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4164 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4166 RwCo
*rwco
= opaque
;
4168 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4171 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4175 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4179 /* Write back cached data to the OS even with cache=unsafe */
4180 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4181 if (bs
->drv
->bdrv_co_flush_to_os
) {
4182 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4188 /* But don't actually force it to the disk with cache=unsafe */
4189 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4193 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4194 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4195 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4196 } else if (bs
->drv
->bdrv_aio_flush
) {
4197 BlockDriverAIOCB
*acb
;
4198 CoroutineIOCompletion co
= {
4199 .coroutine
= qemu_coroutine_self(),
4202 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4206 qemu_coroutine_yield();
4211 * Some block drivers always operate in either writethrough or unsafe
4212 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4213 * know how the server works (because the behaviour is hardcoded or
4214 * depends on server-side configuration), so we can't ensure that
4215 * everything is safe on disk. Returning an error doesn't work because
4216 * that would break guests even if the server operates in writethrough
4219 * Let's hope the user knows what he's doing.
4227 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4228 * in the case of cache=unsafe, so there are no useless flushes.
4231 return bdrv_co_flush(bs
->file
);
4234 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4236 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4237 bs
->drv
->bdrv_invalidate_cache(bs
);
4241 void bdrv_invalidate_cache_all(void)
4243 BlockDriverState
*bs
;
4245 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4246 bdrv_invalidate_cache(bs
);
4250 void bdrv_clear_incoming_migration_all(void)
4252 BlockDriverState
*bs
;
4254 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4255 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4259 int bdrv_flush(BlockDriverState
*bs
)
4267 if (qemu_in_coroutine()) {
4268 /* Fast-path if already in coroutine context */
4269 bdrv_flush_co_entry(&rwco
);
4271 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4272 qemu_coroutine_enter(co
, &rwco
);
4273 while (rwco
.ret
== NOT_DONE
) {
4281 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4283 RwCo
*rwco
= opaque
;
4285 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4288 /* if no limit is specified in the BlockLimits use a default
4289 * of 32768 512-byte sectors (16 MiB) per request.
4291 #define MAX_DISCARD_DEFAULT 32768
4293 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4298 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4300 } else if (bs
->read_only
) {
4304 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4306 /* Do nothing if disabled. */
4307 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4311 if (bs
->drv
->bdrv_co_discard
) {
4312 int max_discard
= bs
->bl
.max_discard
?
4313 bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
4315 while (nb_sectors
> 0) {
4317 int num
= nb_sectors
;
4320 if (bs
->bl
.discard_alignment
&&
4321 num
>= bs
->bl
.discard_alignment
&&
4322 sector_num
% bs
->bl
.discard_alignment
) {
4323 if (num
> bs
->bl
.discard_alignment
) {
4324 num
= bs
->bl
.discard_alignment
;
4326 num
-= sector_num
% bs
->bl
.discard_alignment
;
4329 /* limit request size */
4330 if (num
> max_discard
) {
4334 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
4343 } else if (bs
->drv
->bdrv_aio_discard
) {
4344 BlockDriverAIOCB
*acb
;
4345 CoroutineIOCompletion co
= {
4346 .coroutine
= qemu_coroutine_self(),
4349 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4350 bdrv_co_io_em_complete
, &co
);
4354 qemu_coroutine_yield();
4362 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4367 .sector_num
= sector_num
,
4368 .nb_sectors
= nb_sectors
,
4372 if (qemu_in_coroutine()) {
4373 /* Fast-path if already in coroutine context */
4374 bdrv_discard_co_entry(&rwco
);
4376 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4377 qemu_coroutine_enter(co
, &rwco
);
4378 while (rwco
.ret
== NOT_DONE
) {
4386 /**************************************************************/
4387 /* removable device support */
4390 * Return TRUE if the media is present
4392 int bdrv_is_inserted(BlockDriverState
*bs
)
4394 BlockDriver
*drv
= bs
->drv
;
4398 if (!drv
->bdrv_is_inserted
)
4400 return drv
->bdrv_is_inserted(bs
);
4404 * Return whether the media changed since the last call to this
4405 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4407 int bdrv_media_changed(BlockDriverState
*bs
)
4409 BlockDriver
*drv
= bs
->drv
;
4411 if (drv
&& drv
->bdrv_media_changed
) {
4412 return drv
->bdrv_media_changed(bs
);
4418 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4420 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4422 BlockDriver
*drv
= bs
->drv
;
4424 if (drv
&& drv
->bdrv_eject
) {
4425 drv
->bdrv_eject(bs
, eject_flag
);
4428 if (bs
->device_name
[0] != '\0') {
4429 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4434 * Lock or unlock the media (if it is locked, the user won't be able
4435 * to eject it manually).
4437 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4439 BlockDriver
*drv
= bs
->drv
;
4441 trace_bdrv_lock_medium(bs
, locked
);
4443 if (drv
&& drv
->bdrv_lock_medium
) {
4444 drv
->bdrv_lock_medium(bs
, locked
);
4448 /* needed for generic scsi interface */
4450 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4452 BlockDriver
*drv
= bs
->drv
;
4454 if (drv
&& drv
->bdrv_ioctl
)
4455 return drv
->bdrv_ioctl(bs
, req
, buf
);
4459 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4460 unsigned long int req
, void *buf
,
4461 BlockDriverCompletionFunc
*cb
, void *opaque
)
4463 BlockDriver
*drv
= bs
->drv
;
4465 if (drv
&& drv
->bdrv_aio_ioctl
)
4466 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4470 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4472 bs
->buffer_alignment
= align
;
4475 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4477 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4481 * Check if all memory in this vector is sector aligned.
4483 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4487 for (i
= 0; i
< qiov
->niov
; i
++) {
4488 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4496 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
)
4498 int64_t bitmap_size
;
4499 BdrvDirtyBitmap
*bitmap
;
4501 assert((granularity
& (granularity
- 1)) == 0);
4503 granularity
>>= BDRV_SECTOR_BITS
;
4504 assert(granularity
);
4505 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4506 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
4507 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4508 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
4512 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
4514 BdrvDirtyBitmap
*bm
, *next
;
4515 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
4517 QLIST_REMOVE(bitmap
, list
);
4518 hbitmap_free(bitmap
->bitmap
);
4525 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
4527 BdrvDirtyBitmap
*bm
;
4528 BlockDirtyInfoList
*list
= NULL
;
4529 BlockDirtyInfoList
**plist
= &list
;
4531 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
4532 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
4533 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
4534 info
->count
= bdrv_get_dirty_count(bs
, bm
);
4536 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
4537 entry
->value
= info
;
4539 plist
= &entry
->next
;
4545 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
4548 return hbitmap_get(bitmap
->bitmap
, sector
);
4554 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
4555 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
4557 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
4560 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4563 BdrvDirtyBitmap
*bitmap
;
4564 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
4565 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
4569 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
4571 BdrvDirtyBitmap
*bitmap
;
4572 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
4573 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
4577 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
4579 return hbitmap_count(bitmap
->bitmap
);
4582 /* Get a reference to bs */
4583 void bdrv_ref(BlockDriverState
*bs
)
4588 /* Release a previously grabbed reference to bs.
4589 * If after releasing, reference count is zero, the BlockDriverState is
4591 void bdrv_unref(BlockDriverState
*bs
)
4593 assert(bs
->refcnt
> 0);
4594 if (--bs
->refcnt
== 0) {
4599 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4601 assert(bs
->in_use
!= in_use
);
4602 bs
->in_use
= in_use
;
4605 int bdrv_in_use(BlockDriverState
*bs
)
4610 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4612 bs
->iostatus_enabled
= true;
4613 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4616 /* The I/O status is only enabled if the drive explicitly
4617 * enables it _and_ the VM is configured to stop on errors */
4618 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4620 return (bs
->iostatus_enabled
&&
4621 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4622 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4623 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4626 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4628 bs
->iostatus_enabled
= false;
4631 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4633 if (bdrv_iostatus_is_enabled(bs
)) {
4634 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4636 block_job_iostatus_reset(bs
->job
);
4641 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4643 assert(bdrv_iostatus_is_enabled(bs
));
4644 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4645 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4646 BLOCK_DEVICE_IO_STATUS_FAILED
;
4651 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4652 enum BlockAcctType type
)
4654 assert(type
< BDRV_MAX_IOTYPE
);
4656 cookie
->bytes
= bytes
;
4657 cookie
->start_time_ns
= get_clock();
4658 cookie
->type
= type
;
4662 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4664 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4666 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4667 bs
->nr_ops
[cookie
->type
]++;
4668 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4671 void bdrv_img_create(const char *filename
, const char *fmt
,
4672 const char *base_filename
, const char *base_fmt
,
4673 char *options
, uint64_t img_size
, int flags
,
4674 Error
**errp
, bool quiet
)
4676 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4677 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4678 BlockDriverState
*bs
= NULL
;
4679 BlockDriver
*drv
, *proto_drv
;
4680 BlockDriver
*backing_drv
= NULL
;
4681 Error
*local_err
= NULL
;
4684 /* Find driver and parse its options */
4685 drv
= bdrv_find_format(fmt
);
4687 error_setg(errp
, "Unknown file format '%s'", fmt
);
4691 proto_drv
= bdrv_find_protocol(filename
, true);
4693 error_setg(errp
, "Unknown protocol '%s'", filename
);
4697 create_options
= append_option_parameters(create_options
,
4698 drv
->create_options
);
4699 create_options
= append_option_parameters(create_options
,
4700 proto_drv
->create_options
);
4702 /* Create parameter list with default values */
4703 param
= parse_option_parameters("", create_options
, param
);
4705 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4707 /* Parse -o options */
4709 param
= parse_option_parameters(options
, create_options
, param
);
4710 if (param
== NULL
) {
4711 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4716 if (base_filename
) {
4717 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4719 error_setg(errp
, "Backing file not supported for file format '%s'",
4726 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4727 error_setg(errp
, "Backing file format not supported for file "
4728 "format '%s'", fmt
);
4733 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4734 if (backing_file
&& backing_file
->value
.s
) {
4735 if (!strcmp(filename
, backing_file
->value
.s
)) {
4736 error_setg(errp
, "Error: Trying to create an image with the "
4737 "same filename as the backing file");
4742 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4743 if (backing_fmt
&& backing_fmt
->value
.s
) {
4744 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4746 error_setg(errp
, "Unknown backing file format '%s'",
4747 backing_fmt
->value
.s
);
4752 // The size for the image must always be specified, with one exception:
4753 // If we are using a backing file, we can obtain the size from there
4754 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4755 if (size
&& size
->value
.n
== -1) {
4756 if (backing_file
&& backing_file
->value
.s
) {
4761 /* backing files always opened read-only */
4763 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4767 ret
= bdrv_open(bs
, backing_file
->value
.s
, NULL
, back_flags
,
4768 backing_drv
, &local_err
);
4770 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
4771 backing_file
->value
.s
,
4772 error_get_pretty(local_err
));
4773 error_free(local_err
);
4777 bdrv_get_geometry(bs
, &size
);
4780 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4781 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4783 error_setg(errp
, "Image creation needs a size parameter");
4789 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4790 print_option_parameters(param
);
4793 ret
= bdrv_create(drv
, filename
, param
, &local_err
);
4794 if (ret
== -EFBIG
) {
4795 /* This is generally a better message than whatever the driver would
4796 * deliver (especially because of the cluster_size_hint), since that
4797 * is most probably not much different from "image too large". */
4798 const char *cluster_size_hint
= "";
4799 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
4800 cluster_size_hint
= " (try using a larger cluster size)";
4802 error_setg(errp
, "The image size is too large for file format '%s'"
4803 "%s", fmt
, cluster_size_hint
);
4804 error_free(local_err
);
4809 free_option_parameters(create_options
);
4810 free_option_parameters(param
);
4815 if (error_is_set(&local_err
)) {
4816 error_propagate(errp
, local_err
);
4820 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
4822 /* Currently BlockDriverState always uses the main loop AioContext */
4823 return qemu_get_aio_context();
4826 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
4827 NotifierWithReturn
*notifier
)
4829 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
4832 int bdrv_amend_options(BlockDriverState
*bs
, QEMUOptionParameter
*options
)
4834 if (bs
->drv
->bdrv_amend_options
== NULL
) {
4837 return bs
->drv
->bdrv_amend_options(bs
, options
);
4840 ExtSnapshotPerm
bdrv_check_ext_snapshot(BlockDriverState
*bs
)
4842 if (bs
->drv
->bdrv_check_ext_snapshot
) {
4843 return bs
->drv
->bdrv_check_ext_snapshot(bs
);
4846 if (bs
->file
&& bs
->file
->drv
&& bs
->file
->drv
->bdrv_check_ext_snapshot
) {
4847 return bs
->file
->drv
->bdrv_check_ext_snapshot(bs
);
4850 /* external snapshots are allowed by default */
4851 return EXT_SNAPSHOT_ALLOWED
;
4854 ExtSnapshotPerm
bdrv_check_ext_snapshot_forbidden(BlockDriverState
*bs
)
4856 return EXT_SNAPSHOT_FORBIDDEN
;