disas.c

   1 /* General "disassemble this chunk" code.  Used for debugging. */
   2 #include "config.h"
   3 #include "qemu-common.h"
   4 #include "disas/bfd.h"
   5 #include "elf.h"
   6 #include <errno.h>
   7
   8 #include "cpu.h"
   9 #include "disas/disas.h"
  10
  11 typedef struct CPUDebug {
  12     struct disassemble_info info;
  13     CPUState *cpu;
  14 } CPUDebug;
  15
  16 /* Filled in by elfload.c.  Simplistic, but will do for now. */
  17 struct syminfo *syminfos = NULL;
  18
  19 /* Get LENGTH bytes from info's buffer, at target address memaddr.
  20    Transfer them to myaddr.  */
  21 int
  22 buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
  23                    struct disassemble_info *info)
  24 {
  25     if (memaddr < info->buffer_vma
  26         || memaddr + length > info->buffer_vma + info->buffer_length)
  27         /* Out of bounds.  Use EIO because GDB uses it.  */
  28         return EIO;
  29     memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
  30     return 0;
  31 }
  32
  33 /* Get LENGTH bytes from info's buffer, at target address memaddr.
  34    Transfer them to myaddr.  */
  35 static int
  36 target_read_memory (bfd_vma memaddr,
  37                     bfd_byte *myaddr,
  38                     int length,
  39                     struct disassemble_info *info)
  40 {
  41     CPUDebug *s = container_of(info, CPUDebug, info);
  42
  43     cpu_memory_rw_debug(s->cpu, memaddr, myaddr, length, 0);
  44     return 0;
  45 }
  46
  47 /* Print an error message.  We can assume that this is in response to
  48    an error return from buffer_read_memory.  */
  49 void
  50 perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
  51 {
  52   if (status != EIO)
  53     /* Can't happen.  */
  54     (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
  55   else
  56     /* Actually, address between memaddr and memaddr + len was
  57        out of bounds.  */
  58     (*info->fprintf_func) (info->stream,
  59                            "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
  60 }
  61
  62 /* This could be in a separate file, to save minuscule amounts of space
  63    in statically linked executables.  */
  64
  65 /* Just print the address is hex.  This is included for completeness even
  66    though both GDB and objdump provide their own (to print symbolic
  67    addresses).  */
  68
  69 void
  70 generic_print_address (bfd_vma addr, struct disassemble_info *info)
  71 {
  72     (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
  73 }
  74
  75 /* Print address in hex, truncated to the width of a host virtual address. */
  76 static void
  77 generic_print_host_address(bfd_vma addr, struct disassemble_info *info)
  78 {
  79     uint64_t mask = ~0ULL >> (64 - (sizeof(void *) * 8));
  80     generic_print_address(addr & mask, info);
  81 }
  82
  83 /* Just return the given address.  */
  84
  85 int
  86 generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
  87 {
  88   return 1;
  89 }
  90
  91 bfd_vma bfd_getl64 (const bfd_byte *addr)
  92 {
  93   unsigned long long v;
  94
  95   v = (unsigned long long) addr[0];
  96   v |= (unsigned long long) addr[1] << 8;
  97   v |= (unsigned long long) addr[2] << 16;
  98   v |= (unsigned long long) addr[3] << 24;
  99   v |= (unsigned long long) addr[4] << 32;
 100   v |= (unsigned long long) addr[5] << 40;
 101   v |= (unsigned long long) addr[6] << 48;
 102   v |= (unsigned long long) addr[7] << 56;
 103   return (bfd_vma) v;
 104 }
 105
 106 bfd_vma bfd_getl32 (const bfd_byte *addr)
 107 {
 108   unsigned long v;
 109
 110   v = (unsigned long) addr[0];
 111   v |= (unsigned long) addr[1] << 8;
 112   v |= (unsigned long) addr[2] << 16;
 113   v |= (unsigned long) addr[3] << 24;
 114   return (bfd_vma) v;
 115 }
 116
 117 bfd_vma bfd_getb32 (const bfd_byte *addr)
 118 {
 119   unsigned long v;
 120
 121   v = (unsigned long) addr[0] << 24;
 122   v |= (unsigned long) addr[1] << 16;
 123   v |= (unsigned long) addr[2] << 8;
 124   v |= (unsigned long) addr[3];
 125   return (bfd_vma) v;
 126 }
 127
 128 bfd_vma bfd_getl16 (const bfd_byte *addr)
 129 {
 130   unsigned long v;
 131
 132   v = (unsigned long) addr[0];
 133   v |= (unsigned long) addr[1] << 8;
 134   return (bfd_vma) v;
 135 }
 136
 137 bfd_vma bfd_getb16 (const bfd_byte *addr)
 138 {
 139   unsigned long v;
 140
 141   v = (unsigned long) addr[0] << 24;
 142   v |= (unsigned long) addr[1] << 16;
 143   return (bfd_vma) v;
 144 }
 145
 146 static int print_insn_objdump(bfd_vma pc, disassemble_info *info,
 147                               const char *prefix)
 148 {
 149     int i, n = info->buffer_length;
 150     uint8_t *buf = g_malloc(n);
 151
 152     info->read_memory_func(pc, buf, n, info);
 153
 154     for (i = 0; i < n; ++i) {
 155         if (i % 32 == 0) {
 156             info->fprintf_func(info->stream, "\n%s: ", prefix);
 157         }
 158         info->fprintf_func(info->stream, "%02x", buf[i]);
 159     }
 160
 161     g_free(buf);
 162     return n;
 163 }
 164
 165 static int print_insn_od_host(bfd_vma pc, disassemble_info *info)
 166 {
 167     return print_insn_objdump(pc, info, "OBJD-H");
 168 }
 169
 170 static int print_insn_od_target(bfd_vma pc, disassemble_info *info)
 171 {
 172     return print_insn_objdump(pc, info, "OBJD-T");
 173 }
 174
 175 /* Disassemble this for me please... (debugging). 'flags' has the following
 176    values:
 177     i386 - 1 means 16 bit code, 2 means 64 bit code
 178     ppc  - bits 0:15 specify (optionally) the machine instruction set;
 179            bit 16 indicates little endian.
 180     other targets - unused
 181  */
 182 void target_disas(FILE *out, CPUState *cpu, target_ulong code,
 183                   target_ulong size, int flags)
 184 {
 185     CPUClass *cc = CPU_GET_CLASS(cpu);
 186     target_ulong pc;
 187     int count;
 188     CPUDebug s;
 189
 190     INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
 191
 192     s.cpu = cpu;
 193     s.info.read_memory_func = target_read_memory;
 194     s.info.buffer_vma = code;
 195     s.info.buffer_length = size;
 196     s.info.print_address_func = generic_print_address;
 197
 198 #ifdef TARGET_WORDS_BIGENDIAN
 199     s.info.endian = BFD_ENDIAN_BIG;
 200 #else
 201     s.info.endian = BFD_ENDIAN_LITTLE;
 202 #endif
 203
 204     if (cc->disas_set_info) {
 205         cc->disas_set_info(cpu, &s.info);
 206     }
 207
 208 #if defined(TARGET_I386)
 209     if (flags == 2) {
 210         s.info.mach = bfd_mach_x86_64;
 211     } else if (flags == 1) {
 212         s.info.mach = bfd_mach_i386_i8086;
 213     } else {
 214         s.info.mach = bfd_mach_i386_i386;
 215     }
 216     s.info.print_insn = print_insn_i386;
 217 #elif defined(TARGET_SPARC)
 218     s.info.print_insn = print_insn_sparc;
 219 #ifdef TARGET_SPARC64
 220     s.info.mach = bfd_mach_sparc_v9b;
 221 #endif
 222 #elif defined(TARGET_PPC)
 223     if ((flags >> 16) & 1) {
 224         s.info.endian = BFD_ENDIAN_LITTLE;
 225     }
 226     if (flags & 0xFFFF) {
 227         /* If we have a precise definition of the instruction set, use it. */
 228         s.info.mach = flags & 0xFFFF;
 229     } else {
 230 #ifdef TARGET_PPC64
 231         s.info.mach = bfd_mach_ppc64;
 232 #else
 233         s.info.mach = bfd_mach_ppc;
 234 #endif
 235     }
 236     s.info.disassembler_options = (char *)"any";
 237     s.info.print_insn = print_insn_ppc;
 238 #elif defined(TARGET_M68K)
 239     s.info.print_insn = print_insn_m68k;
 240 #elif defined(TARGET_MIPS)
 241 #ifdef TARGET_WORDS_BIGENDIAN
 242     s.info.print_insn = print_insn_big_mips;
 243 #else
 244     s.info.print_insn = print_insn_little_mips;
 245 #endif
 246 #elif defined(TARGET_SH4)
 247     s.info.mach = bfd_mach_sh4;
 248     s.info.print_insn = print_insn_sh;
 249 #elif defined(TARGET_ALPHA)
 250     s.info.mach = bfd_mach_alpha_ev6;
 251     s.info.print_insn = print_insn_alpha;
 252 #elif defined(TARGET_S390X)
 253     s.info.mach = bfd_mach_s390_64;
 254     s.info.print_insn = print_insn_s390;
 255 #elif defined(TARGET_MOXIE)
 256     s.info.mach = bfd_arch_moxie;
 257     s.info.print_insn = print_insn_moxie;
 258 #elif defined(TARGET_LM32)
 259     s.info.mach = bfd_mach_lm32;
 260     s.info.print_insn = print_insn_lm32;
 261 #endif
 262     if (s.info.print_insn == NULL) {
 263         s.info.print_insn = print_insn_od_target;
 264     }
 265
 266     for (pc = code; size > 0; pc += count, size -= count) {
 267         fprintf(out, "0x" TARGET_FMT_lx ":  ", pc);
 268         count = s.info.print_insn(pc, &s.info);
 269 #if 0
 270         {
 271             int i;
 272             uint8_t b;
 273             fprintf(out, " {");
 274             for(i = 0; i < count; i++) {
 275                 target_read_memory(pc + i, &b, 1, &s.info);
 276                 fprintf(out, " %02x", b);
 277             }
 278             fprintf(out, " }");
 279         }
 280 #endif
 281         fprintf(out, "\n");
 282         if (count < 0)
 283             break;
 284         if (size < count) {
 285             fprintf(out,
 286                     "Disassembler disagrees with translator over instruction "
 287                     "decoding\n"
 288                     "Please report this to qemu-devel@nongnu.org\n");
 289             break;
 290         }
 291     }
 292 }
 293
 294 /* Disassemble this for me please... (debugging). */
 295 void disas(FILE *out, void *code, unsigned long size)
 296 {
 297     uintptr_t pc;
 298     int count;
 299     CPUDebug s;
 300     int (*print_insn)(bfd_vma pc, disassemble_info *info) = NULL;
 301
 302     INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
 303     s.info.print_address_func = generic_print_host_address;
 304
 305     s.info.buffer = code;
 306     s.info.buffer_vma = (uintptr_t)code;
 307     s.info.buffer_length = size;
 308
 309 #ifdef HOST_WORDS_BIGENDIAN
 310     s.info.endian = BFD_ENDIAN_BIG;
 311 #else
 312     s.info.endian = BFD_ENDIAN_LITTLE;
 313 #endif
 314 #if defined(CONFIG_TCG_INTERPRETER)
 315     print_insn = print_insn_tci;
 316 #elif defined(__i386__)
 317     s.info.mach = bfd_mach_i386_i386;
 318     print_insn = print_insn_i386;
 319 #elif defined(__x86_64__)
 320     s.info.mach = bfd_mach_x86_64;
 321     print_insn = print_insn_i386;
 322 #elif defined(_ARCH_PPC)
 323     s.info.disassembler_options = (char *)"any";
 324     print_insn = print_insn_ppc;
 325 #elif defined(__aarch64__) && defined(CONFIG_ARM_A64_DIS)
 326     print_insn = print_insn_arm_a64;
 327 #elif defined(__alpha__)
 328     print_insn = print_insn_alpha;
 329 #elif defined(__sparc__)
 330     print_insn = print_insn_sparc;
 331     s.info.mach = bfd_mach_sparc_v9b;
 332 #elif defined(__arm__)
 333     print_insn = print_insn_arm;
 334 #elif defined(__MIPSEB__)
 335     print_insn = print_insn_big_mips;
 336 #elif defined(__MIPSEL__)
 337     print_insn = print_insn_little_mips;
 338 #elif defined(__m68k__)
 339     print_insn = print_insn_m68k;
 340 #elif defined(__s390__)
 341     print_insn = print_insn_s390;
 342 #elif defined(__hppa__)
 343     print_insn = print_insn_hppa;
 344 #elif defined(__ia64__)
 345     print_insn = print_insn_ia64;
 346 #endif
 347     if (print_insn == NULL) {
 348         print_insn = print_insn_od_host;
 349     }
 350     for (pc = (uintptr_t)code; size > 0; pc += count, size -= count) {
 351         fprintf(out, "0x%08" PRIxPTR ":  ", pc);
 352         count = print_insn(pc, &s.info);
 353         fprintf(out, "\n");
 354         if (count < 0)
 355             break;
 356     }
 357 }
 358
 359 /* Look up symbol for debugging purpose.  Returns "" if unknown. */
 360 const char *lookup_symbol(target_ulong orig_addr)
 361 {
 362     const char *symbol = "";
 363     struct syminfo *s;
 364
 365     for (s = syminfos; s; s = s->next) {
 366         symbol = s->lookup_symbol(s, orig_addr);
 367         if (symbol[0] != '\0') {
 368             break;
 369         }
 370     }
 371
 372     return symbol;
 373 }
 374
 375 #if !defined(CONFIG_USER_ONLY)
 376
 377 #include "monitor/monitor.h"
 378
 379 static int monitor_disas_is_physical;
 380
 381 static int
 382 monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
 383                      struct disassemble_info *info)
 384 {
 385     CPUDebug *s = container_of(info, CPUDebug, info);
 386
 387     if (monitor_disas_is_physical) {
 388         cpu_physical_memory_read(memaddr, myaddr, length);
 389     } else {
 390         cpu_memory_rw_debug(s->cpu, memaddr, myaddr, length, 0);
 391     }
 392     return 0;
 393 }
 394
 395 static int GCC_FMT_ATTR(2, 3)
 396 monitor_fprintf(FILE *stream, const char *fmt, ...)
 397 {
 398     va_list ap;
 399     va_start(ap, fmt);
 400     monitor_vprintf((Monitor *)stream, fmt, ap);
 401     va_end(ap);
 402     return 0;
 403 }
 404
 405 /* Disassembler for the monitor.
 406    See target_disas for a description of flags. */
 407 void monitor_disas(Monitor *mon, CPUState *cpu,
 408                    target_ulong pc, int nb_insn, int is_physical, int flags)
 409 {
 410     CPUClass *cc = CPU_GET_CLASS(cpu);
 411     int count, i;
 412     CPUDebug s;
 413
 414     INIT_DISASSEMBLE_INFO(s.info, (FILE *)mon, monitor_fprintf);
 415
 416     s.cpu = cpu;
 417     monitor_disas_is_physical = is_physical;
 418     s.info.read_memory_func = monitor_read_memory;
 419     s.info.print_address_func = generic_print_address;
 420
 421     s.info.buffer_vma = pc;
 422
 423 #ifdef TARGET_WORDS_BIGENDIAN
 424     s.info.endian = BFD_ENDIAN_BIG;
 425 #else
 426     s.info.endian = BFD_ENDIAN_LITTLE;
 427 #endif
 428
 429     if (cc->disas_set_info) {
 430         cc->disas_set_info(cpu, &s.info);
 431     }
 432
 433 #if defined(TARGET_I386)
 434     if (flags == 2) {
 435         s.info.mach = bfd_mach_x86_64;
 436     } else if (flags == 1) {
 437         s.info.mach = bfd_mach_i386_i8086;
 438     } else {
 439         s.info.mach = bfd_mach_i386_i386;
 440     }
 441     s.info.print_insn = print_insn_i386;
 442 #elif defined(TARGET_ALPHA)
 443     s.info.print_insn = print_insn_alpha;
 444 #elif defined(TARGET_SPARC)
 445     s.info.print_insn = print_insn_sparc;
 446 #ifdef TARGET_SPARC64
 447     s.info.mach = bfd_mach_sparc_v9b;
 448 #endif
 449 #elif defined(TARGET_PPC)
 450     if (flags & 0xFFFF) {
 451         /* If we have a precise definition of the instruction set, use it. */
 452         s.info.mach = flags & 0xFFFF;
 453     } else {
 454 #ifdef TARGET_PPC64
 455         s.info.mach = bfd_mach_ppc64;
 456 #else
 457         s.info.mach = bfd_mach_ppc;
 458 #endif
 459     }
 460     if ((flags >> 16) & 1) {
 461         s.info.endian = BFD_ENDIAN_LITTLE;
 462     }
 463     s.info.print_insn = print_insn_ppc;
 464 #elif defined(TARGET_M68K)
 465     s.info.print_insn = print_insn_m68k;
 466 #elif defined(TARGET_MIPS)
 467 #ifdef TARGET_WORDS_BIGENDIAN
 468     s.info.print_insn = print_insn_big_mips;
 469 #else
 470     s.info.print_insn = print_insn_little_mips;
 471 #endif
 472 #elif defined(TARGET_SH4)
 473     s.info.mach = bfd_mach_sh4;
 474     s.info.print_insn = print_insn_sh;
 475 #elif defined(TARGET_S390X)
 476     s.info.mach = bfd_mach_s390_64;
 477     s.info.print_insn = print_insn_s390;
 478 #elif defined(TARGET_MOXIE)
 479     s.info.mach = bfd_arch_moxie;
 480     s.info.print_insn = print_insn_moxie;
 481 #elif defined(TARGET_LM32)
 482     s.info.mach = bfd_mach_lm32;
 483     s.info.print_insn = print_insn_lm32;
 484 #endif
 485     if (!s.info.print_insn) {
 486         monitor_printf(mon, "0x" TARGET_FMT_lx
 487                        ": Asm output not supported on this arch\n", pc);
 488         return;
 489     }
 490
 491     for(i = 0; i < nb_insn; i++) {
 492         monitor_printf(mon, "0x" TARGET_FMT_lx ":  ", pc);
 493         count = s.info.print_insn(pc, &s.info);
 494         monitor_printf(mon, "\n");
 495         if (count < 0)
 496             break;
 497         pc += count;
 498     }
 499 }
 500 #endif