qmp: Print descriptions of object properties
[qemu/cris-port.git] / disas.c
blob44a019a2e768bae17cb2bb1426d18b2923493776
1 /* General "disassemble this chunk" code. Used for debugging. */
2 #include "config.h"
3 #include "disas/bfd.h"
4 #include "elf.h"
5 #include <errno.h>
7 #include "cpu.h"
8 #include "disas/disas.h"
10 typedef struct CPUDebug {
11 struct disassemble_info info;
12 CPUArchState *env;
13 } CPUDebug;
15 /* Filled in by elfload.c. Simplistic, but will do for now. */
16 struct syminfo *syminfos = NULL;
18 /* Get LENGTH bytes from info's buffer, at target address memaddr.
19 Transfer them to myaddr. */
20 int
21 buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
22 struct disassemble_info *info)
24 if (memaddr < info->buffer_vma
25 || memaddr + length > info->buffer_vma + info->buffer_length)
26 /* Out of bounds. Use EIO because GDB uses it. */
27 return EIO;
28 memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
29 return 0;
32 /* Get LENGTH bytes from info's buffer, at target address memaddr.
33 Transfer them to myaddr. */
34 static int
35 target_read_memory (bfd_vma memaddr,
36 bfd_byte *myaddr,
37 int length,
38 struct disassemble_info *info)
40 CPUDebug *s = container_of(info, CPUDebug, info);
42 cpu_memory_rw_debug(ENV_GET_CPU(s->env), memaddr, myaddr, length, 0);
43 return 0;
46 /* Print an error message. We can assume that this is in response to
47 an error return from buffer_read_memory. */
48 void
49 perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
51 if (status != EIO)
52 /* Can't happen. */
53 (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
54 else
55 /* Actually, address between memaddr and memaddr + len was
56 out of bounds. */
57 (*info->fprintf_func) (info->stream,
58 "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
61 /* This could be in a separate file, to save minuscule amounts of space
62 in statically linked executables. */
64 /* Just print the address is hex. This is included for completeness even
65 though both GDB and objdump provide their own (to print symbolic
66 addresses). */
68 void
69 generic_print_address (bfd_vma addr, struct disassemble_info *info)
71 (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
74 /* Print address in hex, truncated to the width of a target virtual address. */
75 static void
76 generic_print_target_address(bfd_vma addr, struct disassemble_info *info)
78 uint64_t mask = ~0ULL >> (64 - TARGET_VIRT_ADDR_SPACE_BITS);
79 generic_print_address(addr & mask, info);
82 /* Print address in hex, truncated to the width of a host virtual address. */
83 static void
84 generic_print_host_address(bfd_vma addr, struct disassemble_info *info)
86 uint64_t mask = ~0ULL >> (64 - (sizeof(void *) * 8));
87 generic_print_address(addr & mask, info);
90 /* Just return the given address. */
92 int
93 generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
95 return 1;
98 bfd_vma bfd_getl64 (const bfd_byte *addr)
100 unsigned long long v;
102 v = (unsigned long long) addr[0];
103 v |= (unsigned long long) addr[1] << 8;
104 v |= (unsigned long long) addr[2] << 16;
105 v |= (unsigned long long) addr[3] << 24;
106 v |= (unsigned long long) addr[4] << 32;
107 v |= (unsigned long long) addr[5] << 40;
108 v |= (unsigned long long) addr[6] << 48;
109 v |= (unsigned long long) addr[7] << 56;
110 return (bfd_vma) v;
113 bfd_vma bfd_getl32 (const bfd_byte *addr)
115 unsigned long v;
117 v = (unsigned long) addr[0];
118 v |= (unsigned long) addr[1] << 8;
119 v |= (unsigned long) addr[2] << 16;
120 v |= (unsigned long) addr[3] << 24;
121 return (bfd_vma) v;
124 bfd_vma bfd_getb32 (const bfd_byte *addr)
126 unsigned long v;
128 v = (unsigned long) addr[0] << 24;
129 v |= (unsigned long) addr[1] << 16;
130 v |= (unsigned long) addr[2] << 8;
131 v |= (unsigned long) addr[3];
132 return (bfd_vma) v;
135 bfd_vma bfd_getl16 (const bfd_byte *addr)
137 unsigned long v;
139 v = (unsigned long) addr[0];
140 v |= (unsigned long) addr[1] << 8;
141 return (bfd_vma) v;
144 bfd_vma bfd_getb16 (const bfd_byte *addr)
146 unsigned long v;
148 v = (unsigned long) addr[0] << 24;
149 v |= (unsigned long) addr[1] << 16;
150 return (bfd_vma) v;
153 #ifdef TARGET_ARM
154 static int
155 print_insn_thumb1(bfd_vma pc, disassemble_info *info)
157 return print_insn_arm(pc | 1, info);
159 #endif
161 static int print_insn_objdump(bfd_vma pc, disassemble_info *info,
162 const char *prefix)
164 int i, n = info->buffer_length;
165 uint8_t *buf = g_malloc(n);
167 info->read_memory_func(pc, buf, n, info);
169 for (i = 0; i < n; ++i) {
170 if (i % 32 == 0) {
171 info->fprintf_func(info->stream, "\n%s: ", prefix);
173 info->fprintf_func(info->stream, "%02x", buf[i]);
176 g_free(buf);
177 return n;
180 static int print_insn_od_host(bfd_vma pc, disassemble_info *info)
182 return print_insn_objdump(pc, info, "OBJD-H");
185 static int print_insn_od_target(bfd_vma pc, disassemble_info *info)
187 return print_insn_objdump(pc, info, "OBJD-T");
190 /* Disassemble this for me please... (debugging). 'flags' has the following
191 values:
192 i386 - 1 means 16 bit code, 2 means 64 bit code
193 arm - bit 0 = thumb, bit 1 = reverse endian, bit 2 = A64
194 ppc - bits 0:15 specify (optionally) the machine instruction set;
195 bit 16 indicates little endian.
196 other targets - unused
198 void target_disas(FILE *out, CPUArchState *env, target_ulong code,
199 target_ulong size, int flags)
201 target_ulong pc;
202 int count;
203 CPUDebug s;
204 int (*print_insn)(bfd_vma pc, disassemble_info *info) = NULL;
206 INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
208 s.env = env;
209 s.info.read_memory_func = target_read_memory;
210 s.info.buffer_vma = code;
211 s.info.buffer_length = size;
212 s.info.print_address_func = generic_print_target_address;
214 #ifdef TARGET_WORDS_BIGENDIAN
215 s.info.endian = BFD_ENDIAN_BIG;
216 #else
217 s.info.endian = BFD_ENDIAN_LITTLE;
218 #endif
219 #if defined(TARGET_I386)
220 if (flags == 2) {
221 s.info.mach = bfd_mach_x86_64;
222 } else if (flags == 1) {
223 s.info.mach = bfd_mach_i386_i8086;
224 } else {
225 s.info.mach = bfd_mach_i386_i386;
227 print_insn = print_insn_i386;
228 #elif defined(TARGET_ARM)
229 if (flags & 4) {
230 /* We might not be compiled with the A64 disassembler
231 * because it needs a C++ compiler; in that case we will
232 * fall through to the default print_insn_od case.
234 #if defined(CONFIG_ARM_A64_DIS)
235 print_insn = print_insn_arm_a64;
236 #endif
237 } else if (flags & 1) {
238 print_insn = print_insn_thumb1;
239 } else {
240 print_insn = print_insn_arm;
242 if (flags & 2) {
243 #ifdef TARGET_WORDS_BIGENDIAN
244 s.info.endian = BFD_ENDIAN_LITTLE;
245 #else
246 s.info.endian = BFD_ENDIAN_BIG;
247 #endif
249 #elif defined(TARGET_SPARC)
250 print_insn = print_insn_sparc;
251 #ifdef TARGET_SPARC64
252 s.info.mach = bfd_mach_sparc_v9b;
253 #endif
254 #elif defined(TARGET_PPC)
255 if ((flags >> 16) & 1) {
256 s.info.endian = BFD_ENDIAN_LITTLE;
258 if (flags & 0xFFFF) {
259 /* If we have a precise definition of the instruction set, use it. */
260 s.info.mach = flags & 0xFFFF;
261 } else {
262 #ifdef TARGET_PPC64
263 s.info.mach = bfd_mach_ppc64;
264 #else
265 s.info.mach = bfd_mach_ppc;
266 #endif
268 s.info.disassembler_options = (char *)"any";
269 print_insn = print_insn_ppc;
270 #elif defined(TARGET_M68K)
271 print_insn = print_insn_m68k;
272 #elif defined(TARGET_MIPS)
273 #ifdef TARGET_WORDS_BIGENDIAN
274 print_insn = print_insn_big_mips;
275 #else
276 print_insn = print_insn_little_mips;
277 #endif
278 #elif defined(TARGET_SH4)
279 s.info.mach = bfd_mach_sh4;
280 print_insn = print_insn_sh;
281 #elif defined(TARGET_ALPHA)
282 s.info.mach = bfd_mach_alpha_ev6;
283 print_insn = print_insn_alpha;
284 #elif defined(TARGET_CRIS)
285 if (flags != 32) {
286 s.info.mach = bfd_mach_cris_v0_v10;
287 print_insn = print_insn_crisv10;
288 } else {
289 s.info.mach = bfd_mach_cris_v32;
290 print_insn = print_insn_crisv32;
292 #elif defined(TARGET_S390X)
293 s.info.mach = bfd_mach_s390_64;
294 print_insn = print_insn_s390;
295 #elif defined(TARGET_MICROBLAZE)
296 s.info.mach = bfd_arch_microblaze;
297 print_insn = print_insn_microblaze;
298 #elif defined(TARGET_MOXIE)
299 s.info.mach = bfd_arch_moxie;
300 print_insn = print_insn_moxie;
301 #elif defined(TARGET_LM32)
302 s.info.mach = bfd_mach_lm32;
303 print_insn = print_insn_lm32;
304 #endif
305 if (print_insn == NULL) {
306 print_insn = print_insn_od_target;
309 for (pc = code; size > 0; pc += count, size -= count) {
310 fprintf(out, "0x" TARGET_FMT_lx ": ", pc);
311 count = print_insn(pc, &s.info);
312 #if 0
314 int i;
315 uint8_t b;
316 fprintf(out, " {");
317 for(i = 0; i < count; i++) {
318 target_read_memory(pc + i, &b, 1, &s.info);
319 fprintf(out, " %02x", b);
321 fprintf(out, " }");
323 #endif
324 fprintf(out, "\n");
325 if (count < 0)
326 break;
327 if (size < count) {
328 fprintf(out,
329 "Disassembler disagrees with translator over instruction "
330 "decoding\n"
331 "Please report this to qemu-devel@nongnu.org\n");
332 break;
337 /* Disassemble this for me please... (debugging). */
338 void disas(FILE *out, void *code, unsigned long size)
340 uintptr_t pc;
341 int count;
342 CPUDebug s;
343 int (*print_insn)(bfd_vma pc, disassemble_info *info) = NULL;
345 INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
346 s.info.print_address_func = generic_print_host_address;
348 s.info.buffer = code;
349 s.info.buffer_vma = (uintptr_t)code;
350 s.info.buffer_length = size;
352 #ifdef HOST_WORDS_BIGENDIAN
353 s.info.endian = BFD_ENDIAN_BIG;
354 #else
355 s.info.endian = BFD_ENDIAN_LITTLE;
356 #endif
357 #if defined(CONFIG_TCG_INTERPRETER)
358 print_insn = print_insn_tci;
359 #elif defined(__i386__)
360 s.info.mach = bfd_mach_i386_i386;
361 print_insn = print_insn_i386;
362 #elif defined(__x86_64__)
363 s.info.mach = bfd_mach_x86_64;
364 print_insn = print_insn_i386;
365 #elif defined(_ARCH_PPC)
366 s.info.disassembler_options = (char *)"any";
367 print_insn = print_insn_ppc;
368 #elif defined(__aarch64__) && defined(CONFIG_ARM_A64_DIS)
369 print_insn = print_insn_arm_a64;
370 #elif defined(__alpha__)
371 print_insn = print_insn_alpha;
372 #elif defined(__sparc__)
373 print_insn = print_insn_sparc;
374 s.info.mach = bfd_mach_sparc_v9b;
375 #elif defined(__arm__)
376 print_insn = print_insn_arm;
377 #elif defined(__MIPSEB__)
378 print_insn = print_insn_big_mips;
379 #elif defined(__MIPSEL__)
380 print_insn = print_insn_little_mips;
381 #elif defined(__m68k__)
382 print_insn = print_insn_m68k;
383 #elif defined(__s390__)
384 print_insn = print_insn_s390;
385 #elif defined(__hppa__)
386 print_insn = print_insn_hppa;
387 #elif defined(__ia64__)
388 print_insn = print_insn_ia64;
389 #endif
390 if (print_insn == NULL) {
391 print_insn = print_insn_od_host;
393 for (pc = (uintptr_t)code; size > 0; pc += count, size -= count) {
394 fprintf(out, "0x%08" PRIxPTR ": ", pc);
395 count = print_insn(pc, &s.info);
396 fprintf(out, "\n");
397 if (count < 0)
398 break;
402 /* Look up symbol for debugging purpose. Returns "" if unknown. */
403 const char *lookup_symbol(target_ulong orig_addr)
405 const char *symbol = "";
406 struct syminfo *s;
408 for (s = syminfos; s; s = s->next) {
409 symbol = s->lookup_symbol(s, orig_addr);
410 if (symbol[0] != '\0') {
411 break;
415 return symbol;
418 #if !defined(CONFIG_USER_ONLY)
420 #include "monitor/monitor.h"
422 static int monitor_disas_is_physical;
424 static int
425 monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
426 struct disassemble_info *info)
428 CPUDebug *s = container_of(info, CPUDebug, info);
430 if (monitor_disas_is_physical) {
431 cpu_physical_memory_read(memaddr, myaddr, length);
432 } else {
433 cpu_memory_rw_debug(ENV_GET_CPU(s->env), memaddr, myaddr, length, 0);
435 return 0;
438 static int GCC_FMT_ATTR(2, 3)
439 monitor_fprintf(FILE *stream, const char *fmt, ...)
441 va_list ap;
442 va_start(ap, fmt);
443 monitor_vprintf((Monitor *)stream, fmt, ap);
444 va_end(ap);
445 return 0;
448 /* Disassembler for the monitor.
449 See target_disas for a description of flags. */
450 void monitor_disas(Monitor *mon, CPUArchState *env,
451 target_ulong pc, int nb_insn, int is_physical, int flags)
453 int count, i;
454 CPUDebug s;
455 int (*print_insn)(bfd_vma pc, disassemble_info *info);
457 INIT_DISASSEMBLE_INFO(s.info, (FILE *)mon, monitor_fprintf);
459 s.env = env;
460 monitor_disas_is_physical = is_physical;
461 s.info.read_memory_func = monitor_read_memory;
462 s.info.print_address_func = generic_print_target_address;
464 s.info.buffer_vma = pc;
466 #ifdef TARGET_WORDS_BIGENDIAN
467 s.info.endian = BFD_ENDIAN_BIG;
468 #else
469 s.info.endian = BFD_ENDIAN_LITTLE;
470 #endif
471 #if defined(TARGET_I386)
472 if (flags == 2) {
473 s.info.mach = bfd_mach_x86_64;
474 } else if (flags == 1) {
475 s.info.mach = bfd_mach_i386_i8086;
476 } else {
477 s.info.mach = bfd_mach_i386_i386;
479 print_insn = print_insn_i386;
480 #elif defined(TARGET_ARM)
481 print_insn = print_insn_arm;
482 #elif defined(TARGET_ALPHA)
483 print_insn = print_insn_alpha;
484 #elif defined(TARGET_SPARC)
485 print_insn = print_insn_sparc;
486 #ifdef TARGET_SPARC64
487 s.info.mach = bfd_mach_sparc_v9b;
488 #endif
489 #elif defined(TARGET_PPC)
490 if (flags & 0xFFFF) {
491 /* If we have a precise definition of the instruction set, use it. */
492 s.info.mach = flags & 0xFFFF;
493 } else {
494 #ifdef TARGET_PPC64
495 s.info.mach = bfd_mach_ppc64;
496 #else
497 s.info.mach = bfd_mach_ppc;
498 #endif
500 if ((flags >> 16) & 1) {
501 s.info.endian = BFD_ENDIAN_LITTLE;
503 print_insn = print_insn_ppc;
504 #elif defined(TARGET_M68K)
505 print_insn = print_insn_m68k;
506 #elif defined(TARGET_MIPS)
507 #ifdef TARGET_WORDS_BIGENDIAN
508 print_insn = print_insn_big_mips;
509 #else
510 print_insn = print_insn_little_mips;
511 #endif
512 #elif defined(TARGET_SH4)
513 s.info.mach = bfd_mach_sh4;
514 print_insn = print_insn_sh;
515 #elif defined(TARGET_S390X)
516 s.info.mach = bfd_mach_s390_64;
517 print_insn = print_insn_s390;
518 #elif defined(TARGET_MOXIE)
519 s.info.mach = bfd_arch_moxie;
520 print_insn = print_insn_moxie;
521 #elif defined(TARGET_LM32)
522 s.info.mach = bfd_mach_lm32;
523 print_insn = print_insn_lm32;
524 #else
525 monitor_printf(mon, "0x" TARGET_FMT_lx
526 ": Asm output not supported on this arch\n", pc);
527 return;
528 #endif
530 for(i = 0; i < nb_insn; i++) {
531 monitor_printf(mon, "0x" TARGET_FMT_lx ": ", pc);
532 count = print_insn(pc, &s.info);
533 monitor_printf(mon, "\n");
534 if (count < 0)
535 break;
536 pc += count;
539 #endif