qapi/qdev: Tidy up device_add documentation
[qemu/armbru.git] / hw / riscv / sifive_u.c
blob35a335b8d0ba54eb9c74c142d134a6c6875083df
1 /*
2 * QEMU RISC-V Board Compatible with SiFive Freedom U SDK
4 * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
5 * Copyright (c) 2017 SiFive, Inc.
6 * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
8 * Provides a board compatible with the SiFive Freedom U SDK:
10 * 0) UART
11 * 1) CLINT (Core Level Interruptor)
12 * 2) PLIC (Platform Level Interrupt Controller)
13 * 3) PRCI (Power, Reset, Clock, Interrupt)
14 * 4) GPIO (General Purpose Input/Output Controller)
15 * 5) OTP (One-Time Programmable) memory with stored serial number
16 * 6) GEM (Gigabit Ethernet Controller) and management block
17 * 7) DMA (Direct Memory Access Controller)
18 * 8) SPI0 connected to an SPI flash
19 * 9) SPI2 connected to an SD card
20 * 10) PWM0 and PWM1
22 * This board currently generates devicetree dynamically that indicates at least
23 * two harts and up to five harts.
25 * This program is free software; you can redistribute it and/or modify it
26 * under the terms and conditions of the GNU General Public License,
27 * version 2 or later, as published by the Free Software Foundation.
29 * This program is distributed in the hope it will be useful, but WITHOUT
30 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
31 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
32 * more details.
34 * You should have received a copy of the GNU General Public License along with
35 * this program. If not, see <http://www.gnu.org/licenses/>.
38 #include "qemu/osdep.h"
39 #include "qemu/error-report.h"
40 #include "qapi/error.h"
41 #include "qapi/visitor.h"
42 #include "hw/boards.h"
43 #include "hw/irq.h"
44 #include "hw/loader.h"
45 #include "hw/sysbus.h"
46 #include "hw/char/serial.h"
47 #include "hw/cpu/cluster.h"
48 #include "hw/misc/unimp.h"
49 #include "hw/sd/sd.h"
50 #include "hw/ssi/ssi.h"
51 #include "target/riscv/cpu.h"
52 #include "hw/riscv/riscv_hart.h"
53 #include "hw/riscv/sifive_u.h"
54 #include "hw/riscv/boot.h"
55 #include "hw/char/sifive_uart.h"
56 #include "hw/intc/riscv_aclint.h"
57 #include "hw/intc/sifive_plic.h"
58 #include "chardev/char.h"
59 #include "net/eth.h"
60 #include "sysemu/device_tree.h"
61 #include "sysemu/runstate.h"
62 #include "sysemu/sysemu.h"
64 #include <libfdt.h>
66 /* CLINT timebase frequency */
67 #define CLINT_TIMEBASE_FREQ 1000000
69 static const MemMapEntry sifive_u_memmap[] = {
70 [SIFIVE_U_DEV_DEBUG] = { 0x0, 0x100 },
71 [SIFIVE_U_DEV_MROM] = { 0x1000, 0xf000 },
72 [SIFIVE_U_DEV_CLINT] = { 0x2000000, 0x10000 },
73 [SIFIVE_U_DEV_L2CC] = { 0x2010000, 0x1000 },
74 [SIFIVE_U_DEV_PDMA] = { 0x3000000, 0x100000 },
75 [SIFIVE_U_DEV_L2LIM] = { 0x8000000, 0x2000000 },
76 [SIFIVE_U_DEV_PLIC] = { 0xc000000, 0x4000000 },
77 [SIFIVE_U_DEV_PRCI] = { 0x10000000, 0x1000 },
78 [SIFIVE_U_DEV_UART0] = { 0x10010000, 0x1000 },
79 [SIFIVE_U_DEV_UART1] = { 0x10011000, 0x1000 },
80 [SIFIVE_U_DEV_PWM0] = { 0x10020000, 0x1000 },
81 [SIFIVE_U_DEV_PWM1] = { 0x10021000, 0x1000 },
82 [SIFIVE_U_DEV_QSPI0] = { 0x10040000, 0x1000 },
83 [SIFIVE_U_DEV_QSPI2] = { 0x10050000, 0x1000 },
84 [SIFIVE_U_DEV_GPIO] = { 0x10060000, 0x1000 },
85 [SIFIVE_U_DEV_OTP] = { 0x10070000, 0x1000 },
86 [SIFIVE_U_DEV_GEM] = { 0x10090000, 0x2000 },
87 [SIFIVE_U_DEV_GEM_MGMT] = { 0x100a0000, 0x1000 },
88 [SIFIVE_U_DEV_DMC] = { 0x100b0000, 0x10000 },
89 [SIFIVE_U_DEV_FLASH0] = { 0x20000000, 0x10000000 },
90 [SIFIVE_U_DEV_DRAM] = { 0x80000000, 0x0 },
93 #define OTP_SERIAL 1
94 #define GEM_REVISION 0x10070109
96 static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
97 bool is_32_bit)
99 MachineState *ms = MACHINE(s);
100 uint64_t mem_size = ms->ram_size;
101 void *fdt;
102 int cpu;
103 uint32_t *cells;
104 char *nodename;
105 uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
106 uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
107 static const char * const ethclk_names[2] = { "pclk", "hclk" };
108 static const char * const clint_compat[2] = {
109 "sifive,clint0", "riscv,clint0"
111 static const char * const plic_compat[2] = {
112 "sifive,plic-1.0.0", "riscv,plic0"
115 fdt = ms->fdt = create_device_tree(&s->fdt_size);
116 if (!fdt) {
117 error_report("create_device_tree() failed");
118 exit(1);
121 qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00");
122 qemu_fdt_setprop_string(fdt, "/", "compatible",
123 "sifive,hifive-unleashed-a00");
124 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
125 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
127 qemu_fdt_add_subnode(fdt, "/soc");
128 qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
129 qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
130 qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
131 qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
133 hfclk_phandle = phandle++;
134 nodename = g_strdup_printf("/hfclk");
135 qemu_fdt_add_subnode(fdt, nodename);
136 qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
137 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
138 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
139 SIFIVE_U_HFCLK_FREQ);
140 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
141 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
142 g_free(nodename);
144 rtcclk_phandle = phandle++;
145 nodename = g_strdup_printf("/rtcclk");
146 qemu_fdt_add_subnode(fdt, nodename);
147 qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
148 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
149 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
150 SIFIVE_U_RTCCLK_FREQ);
151 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
152 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
153 g_free(nodename);
155 nodename = g_strdup_printf("/memory@%lx",
156 (long)memmap[SIFIVE_U_DEV_DRAM].base);
157 qemu_fdt_add_subnode(fdt, nodename);
158 qemu_fdt_setprop_cells(fdt, nodename, "reg",
159 memmap[SIFIVE_U_DEV_DRAM].base >> 32, memmap[SIFIVE_U_DEV_DRAM].base,
160 mem_size >> 32, mem_size);
161 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
162 g_free(nodename);
164 qemu_fdt_add_subnode(fdt, "/cpus");
165 qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
166 CLINT_TIMEBASE_FREQ);
167 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
168 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
170 for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
171 int cpu_phandle = phandle++;
172 nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
173 char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
174 char *isa;
175 qemu_fdt_add_subnode(fdt, nodename);
176 /* cpu 0 is the management hart that does not have mmu */
177 if (cpu != 0) {
178 if (is_32_bit) {
179 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
180 } else {
181 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
183 isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
184 } else {
185 isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
187 qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa);
188 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
189 qemu_fdt_setprop_string(fdt, nodename, "status", "okay");
190 qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu);
191 qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
192 qemu_fdt_add_subnode(fdt, intc);
193 qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle);
194 qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
195 qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
196 qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
197 g_free(isa);
198 g_free(intc);
199 g_free(nodename);
202 cells = g_new0(uint32_t, ms->smp.cpus * 4);
203 for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
204 nodename =
205 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
206 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
207 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
208 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
209 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
210 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
211 g_free(nodename);
213 nodename = g_strdup_printf("/soc/clint@%lx",
214 (long)memmap[SIFIVE_U_DEV_CLINT].base);
215 qemu_fdt_add_subnode(fdt, nodename);
216 qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
217 (char **)&clint_compat, ARRAY_SIZE(clint_compat));
218 qemu_fdt_setprop_cells(fdt, nodename, "reg",
219 0x0, memmap[SIFIVE_U_DEV_CLINT].base,
220 0x0, memmap[SIFIVE_U_DEV_CLINT].size);
221 qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
222 cells, ms->smp.cpus * sizeof(uint32_t) * 4);
223 g_free(cells);
224 g_free(nodename);
226 nodename = g_strdup_printf("/soc/otp@%lx",
227 (long)memmap[SIFIVE_U_DEV_OTP].base);
228 qemu_fdt_add_subnode(fdt, nodename);
229 qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE);
230 qemu_fdt_setprop_cells(fdt, nodename, "reg",
231 0x0, memmap[SIFIVE_U_DEV_OTP].base,
232 0x0, memmap[SIFIVE_U_DEV_OTP].size);
233 qemu_fdt_setprop_string(fdt, nodename, "compatible",
234 "sifive,fu540-c000-otp");
235 g_free(nodename);
237 prci_phandle = phandle++;
238 nodename = g_strdup_printf("/soc/clock-controller@%lx",
239 (long)memmap[SIFIVE_U_DEV_PRCI].base);
240 qemu_fdt_add_subnode(fdt, nodename);
241 qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
242 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
243 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
244 hfclk_phandle, rtcclk_phandle);
245 qemu_fdt_setprop_cells(fdt, nodename, "reg",
246 0x0, memmap[SIFIVE_U_DEV_PRCI].base,
247 0x0, memmap[SIFIVE_U_DEV_PRCI].size);
248 qemu_fdt_setprop_string(fdt, nodename, "compatible",
249 "sifive,fu540-c000-prci");
250 g_free(nodename);
252 plic_phandle = phandle++;
253 cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2);
254 for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
255 nodename =
256 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
257 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
258 /* cpu 0 is the management hart that does not have S-mode */
259 if (cpu == 0) {
260 cells[0] = cpu_to_be32(intc_phandle);
261 cells[1] = cpu_to_be32(IRQ_M_EXT);
262 } else {
263 cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle);
264 cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT);
265 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
266 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT);
268 g_free(nodename);
270 nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
271 (long)memmap[SIFIVE_U_DEV_PLIC].base);
272 qemu_fdt_add_subnode(fdt, nodename);
273 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
274 qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
275 (char **)&plic_compat, ARRAY_SIZE(plic_compat));
276 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
277 qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
278 cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
279 qemu_fdt_setprop_cells(fdt, nodename, "reg",
280 0x0, memmap[SIFIVE_U_DEV_PLIC].base,
281 0x0, memmap[SIFIVE_U_DEV_PLIC].size);
282 qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev",
283 SIFIVE_U_PLIC_NUM_SOURCES - 1);
284 qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
285 plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
286 g_free(cells);
287 g_free(nodename);
289 gpio_phandle = phandle++;
290 nodename = g_strdup_printf("/soc/gpio@%lx",
291 (long)memmap[SIFIVE_U_DEV_GPIO].base);
292 qemu_fdt_add_subnode(fdt, nodename);
293 qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle);
294 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
295 prci_phandle, PRCI_CLK_TLCLK);
296 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2);
297 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
298 qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2);
299 qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0);
300 qemu_fdt_setprop_cells(fdt, nodename, "reg",
301 0x0, memmap[SIFIVE_U_DEV_GPIO].base,
302 0x0, memmap[SIFIVE_U_DEV_GPIO].size);
303 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0,
304 SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3,
305 SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6,
306 SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9,
307 SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12,
308 SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15);
309 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
310 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0");
311 g_free(nodename);
313 nodename = g_strdup_printf("/gpio-restart");
314 qemu_fdt_add_subnode(fdt, nodename);
315 qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1);
316 qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart");
317 g_free(nodename);
319 nodename = g_strdup_printf("/soc/dma@%lx",
320 (long)memmap[SIFIVE_U_DEV_PDMA].base);
321 qemu_fdt_add_subnode(fdt, nodename);
322 qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1);
323 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
324 SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2,
325 SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5,
326 SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7);
327 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
328 qemu_fdt_setprop_cells(fdt, nodename, "reg",
329 0x0, memmap[SIFIVE_U_DEV_PDMA].base,
330 0x0, memmap[SIFIVE_U_DEV_PDMA].size);
331 qemu_fdt_setprop_string(fdt, nodename, "compatible",
332 "sifive,fu540-c000-pdma");
333 g_free(nodename);
335 nodename = g_strdup_printf("/soc/cache-controller@%lx",
336 (long)memmap[SIFIVE_U_DEV_L2CC].base);
337 qemu_fdt_add_subnode(fdt, nodename);
338 qemu_fdt_setprop_cells(fdt, nodename, "reg",
339 0x0, memmap[SIFIVE_U_DEV_L2CC].base,
340 0x0, memmap[SIFIVE_U_DEV_L2CC].size);
341 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
342 SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2);
343 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
344 qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0);
345 qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152);
346 qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024);
347 qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2);
348 qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64);
349 qemu_fdt_setprop_string(fdt, nodename, "compatible",
350 "sifive,fu540-c000-ccache");
351 g_free(nodename);
353 nodename = g_strdup_printf("/soc/spi@%lx",
354 (long)memmap[SIFIVE_U_DEV_QSPI2].base);
355 qemu_fdt_add_subnode(fdt, nodename);
356 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
357 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
358 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
359 prci_phandle, PRCI_CLK_TLCLK);
360 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ);
361 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
362 qemu_fdt_setprop_cells(fdt, nodename, "reg",
363 0x0, memmap[SIFIVE_U_DEV_QSPI2].base,
364 0x0, memmap[SIFIVE_U_DEV_QSPI2].size);
365 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
366 g_free(nodename);
368 nodename = g_strdup_printf("/soc/spi@%lx/mmc@0",
369 (long)memmap[SIFIVE_U_DEV_QSPI2].base);
370 qemu_fdt_add_subnode(fdt, nodename);
371 qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0);
372 qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300);
373 qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000);
374 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
375 qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot");
376 g_free(nodename);
378 nodename = g_strdup_printf("/soc/spi@%lx",
379 (long)memmap[SIFIVE_U_DEV_QSPI0].base);
380 qemu_fdt_add_subnode(fdt, nodename);
381 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
382 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
383 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
384 prci_phandle, PRCI_CLK_TLCLK);
385 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI0_IRQ);
386 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
387 qemu_fdt_setprop_cells(fdt, nodename, "reg",
388 0x0, memmap[SIFIVE_U_DEV_QSPI0].base,
389 0x0, memmap[SIFIVE_U_DEV_QSPI0].size);
390 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
391 g_free(nodename);
393 nodename = g_strdup_printf("/soc/spi@%lx/flash@0",
394 (long)memmap[SIFIVE_U_DEV_QSPI0].base);
395 qemu_fdt_add_subnode(fdt, nodename);
396 qemu_fdt_setprop_cell(fdt, nodename, "spi-rx-bus-width", 4);
397 qemu_fdt_setprop_cell(fdt, nodename, "spi-tx-bus-width", 4);
398 qemu_fdt_setprop(fdt, nodename, "m25p,fast-read", NULL, 0);
399 qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 50000000);
400 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
401 qemu_fdt_setprop_string(fdt, nodename, "compatible", "jedec,spi-nor");
402 g_free(nodename);
404 phy_phandle = phandle++;
405 nodename = g_strdup_printf("/soc/ethernet@%lx",
406 (long)memmap[SIFIVE_U_DEV_GEM].base);
407 qemu_fdt_add_subnode(fdt, nodename);
408 qemu_fdt_setprop_string(fdt, nodename, "compatible",
409 "sifive,fu540-c000-gem");
410 qemu_fdt_setprop_cells(fdt, nodename, "reg",
411 0x0, memmap[SIFIVE_U_DEV_GEM].base,
412 0x0, memmap[SIFIVE_U_DEV_GEM].size,
413 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].base,
414 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
415 qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
416 qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
417 qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
418 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
419 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
420 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
421 prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
422 qemu_fdt_setprop_string_array(fdt, nodename, "clock-names",
423 (char **)&ethclk_names, ARRAY_SIZE(ethclk_names));
424 qemu_fdt_setprop(fdt, nodename, "local-mac-address",
425 s->soc.gem.conf.macaddr.a, ETH_ALEN);
426 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
427 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
429 qemu_fdt_add_subnode(fdt, "/aliases");
430 qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename);
432 g_free(nodename);
434 nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
435 (long)memmap[SIFIVE_U_DEV_GEM].base);
436 qemu_fdt_add_subnode(fdt, nodename);
437 qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
438 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
439 g_free(nodename);
441 nodename = g_strdup_printf("/soc/pwm@%lx",
442 (long)memmap[SIFIVE_U_DEV_PWM0].base);
443 qemu_fdt_add_subnode(fdt, nodename);
444 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
445 qemu_fdt_setprop_cells(fdt, nodename, "reg",
446 0x0, memmap[SIFIVE_U_DEV_PWM0].base,
447 0x0, memmap[SIFIVE_U_DEV_PWM0].size);
448 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
449 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
450 SIFIVE_U_PWM0_IRQ0, SIFIVE_U_PWM0_IRQ1,
451 SIFIVE_U_PWM0_IRQ2, SIFIVE_U_PWM0_IRQ3);
452 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
453 prci_phandle, PRCI_CLK_TLCLK);
454 qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
455 g_free(nodename);
457 nodename = g_strdup_printf("/soc/pwm@%lx",
458 (long)memmap[SIFIVE_U_DEV_PWM1].base);
459 qemu_fdt_add_subnode(fdt, nodename);
460 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
461 qemu_fdt_setprop_cells(fdt, nodename, "reg",
462 0x0, memmap[SIFIVE_U_DEV_PWM1].base,
463 0x0, memmap[SIFIVE_U_DEV_PWM1].size);
464 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
465 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
466 SIFIVE_U_PWM1_IRQ0, SIFIVE_U_PWM1_IRQ1,
467 SIFIVE_U_PWM1_IRQ2, SIFIVE_U_PWM1_IRQ3);
468 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
469 prci_phandle, PRCI_CLK_TLCLK);
470 qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
471 g_free(nodename);
473 nodename = g_strdup_printf("/soc/serial@%lx",
474 (long)memmap[SIFIVE_U_DEV_UART1].base);
475 qemu_fdt_add_subnode(fdt, nodename);
476 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
477 qemu_fdt_setprop_cells(fdt, nodename, "reg",
478 0x0, memmap[SIFIVE_U_DEV_UART1].base,
479 0x0, memmap[SIFIVE_U_DEV_UART1].size);
480 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
481 prci_phandle, PRCI_CLK_TLCLK);
482 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
483 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART1_IRQ);
485 qemu_fdt_setprop_string(fdt, "/aliases", "serial1", nodename);
486 g_free(nodename);
488 nodename = g_strdup_printf("/soc/serial@%lx",
489 (long)memmap[SIFIVE_U_DEV_UART0].base);
490 qemu_fdt_add_subnode(fdt, nodename);
491 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
492 qemu_fdt_setprop_cells(fdt, nodename, "reg",
493 0x0, memmap[SIFIVE_U_DEV_UART0].base,
494 0x0, memmap[SIFIVE_U_DEV_UART0].size);
495 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
496 prci_phandle, PRCI_CLK_TLCLK);
497 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
498 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
500 qemu_fdt_add_subnode(fdt, "/chosen");
501 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
502 qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename);
504 g_free(nodename);
507 static void sifive_u_machine_reset(void *opaque, int n, int level)
509 /* gpio pin active low triggers reset */
510 if (!level) {
511 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
515 static void sifive_u_machine_init(MachineState *machine)
517 const MemMapEntry *memmap = sifive_u_memmap;
518 SiFiveUState *s = RISCV_U_MACHINE(machine);
519 MemoryRegion *system_memory = get_system_memory();
520 MemoryRegion *flash0 = g_new(MemoryRegion, 1);
521 target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
522 target_ulong firmware_end_addr, kernel_start_addr;
523 const char *firmware_name;
524 uint32_t start_addr_hi32 = 0x00000000;
525 int i;
526 uint32_t fdt_load_addr;
527 uint64_t kernel_entry;
528 DriveInfo *dinfo;
529 BlockBackend *blk;
530 DeviceState *flash_dev, *sd_dev, *card_dev;
531 qemu_irq flash_cs, sd_cs;
533 /* Initialize SoC */
534 object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
535 object_property_set_uint(OBJECT(&s->soc), "serial", s->serial,
536 &error_abort);
537 object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type,
538 &error_abort);
539 qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
541 /* register RAM */
542 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base,
543 machine->ram);
545 /* register QSPI0 Flash */
546 memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0",
547 memmap[SIFIVE_U_DEV_FLASH0].size, &error_fatal);
548 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_FLASH0].base,
549 flash0);
551 /* register gpio-restart */
552 qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10,
553 qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
555 /* load/create device tree */
556 if (machine->dtb) {
557 machine->fdt = load_device_tree(machine->dtb, &s->fdt_size);
558 if (!machine->fdt) {
559 error_report("load_device_tree() failed");
560 exit(1);
562 } else {
563 create_fdt(s, memmap, riscv_is_32bit(&s->soc.u_cpus));
566 if (s->start_in_flash) {
568 * If start_in_flash property is given, assign s->msel to a value
569 * that representing booting from QSPI0 memory-mapped flash.
571 * This also means that when both start_in_flash and msel properties
572 * are given, start_in_flash takes the precedence over msel.
574 * Note this is to keep backward compatibility not to break existing
575 * users that use start_in_flash property.
577 s->msel = MSEL_MEMMAP_QSPI0_FLASH;
580 switch (s->msel) {
581 case MSEL_MEMMAP_QSPI0_FLASH:
582 start_addr = memmap[SIFIVE_U_DEV_FLASH0].base;
583 break;
584 case MSEL_L2LIM_QSPI0_FLASH:
585 case MSEL_L2LIM_QSPI2_SD:
586 start_addr = memmap[SIFIVE_U_DEV_L2LIM].base;
587 break;
588 default:
589 start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
590 break;
593 firmware_name = riscv_default_firmware_name(&s->soc.u_cpus);
594 firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
595 start_addr, NULL);
597 if (machine->kernel_filename) {
598 kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
599 firmware_end_addr);
601 kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus,
602 kernel_start_addr, true, NULL);
603 } else {
605 * If dynamic firmware is used, it doesn't know where is the next mode
606 * if kernel argument is not set.
608 kernel_entry = 0;
611 fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base,
612 memmap[SIFIVE_U_DEV_DRAM].size,
613 machine);
614 riscv_load_fdt(fdt_load_addr, machine->fdt);
616 if (!riscv_is_32bit(&s->soc.u_cpus)) {
617 start_addr_hi32 = (uint64_t)start_addr >> 32;
620 /* reset vector */
621 uint32_t reset_vec[12] = {
622 s->msel, /* MSEL pin state */
623 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */
624 0x02c28613, /* addi a2, t0, %pcrel_lo(1b) */
625 0xf1402573, /* csrr a0, mhartid */
628 0x00028067, /* jr t0 */
629 start_addr, /* start: .dword */
630 start_addr_hi32,
631 fdt_load_addr, /* fdt_laddr: .dword */
632 0x00000000,
633 0x00000000,
634 /* fw_dyn: */
636 if (riscv_is_32bit(&s->soc.u_cpus)) {
637 reset_vec[4] = 0x0202a583; /* lw a1, 32(t0) */
638 reset_vec[5] = 0x0182a283; /* lw t0, 24(t0) */
639 } else {
640 reset_vec[4] = 0x0202b583; /* ld a1, 32(t0) */
641 reset_vec[5] = 0x0182b283; /* ld t0, 24(t0) */
645 /* copy in the reset vector in little_endian byte order */
646 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
647 reset_vec[i] = cpu_to_le32(reset_vec[i]);
649 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
650 memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
652 riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
653 memmap[SIFIVE_U_DEV_MROM].size,
654 sizeof(reset_vec), kernel_entry);
656 /* Connect an SPI flash to SPI0 */
657 flash_dev = qdev_new("is25wp256");
658 dinfo = drive_get(IF_MTD, 0, 0);
659 if (dinfo) {
660 qdev_prop_set_drive_err(flash_dev, "drive",
661 blk_by_legacy_dinfo(dinfo),
662 &error_fatal);
664 qdev_realize_and_unref(flash_dev, BUS(s->soc.spi0.spi), &error_fatal);
666 flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
667 sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs);
669 /* Connect an SD card to SPI2 */
670 sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd");
672 sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0);
673 sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs);
675 dinfo = drive_get(IF_SD, 0, 0);
676 blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
677 card_dev = qdev_new(TYPE_SD_CARD);
678 qdev_prop_set_drive_err(card_dev, "drive", blk, &error_fatal);
679 qdev_prop_set_bit(card_dev, "spi", true);
680 qdev_realize_and_unref(card_dev,
681 qdev_get_child_bus(sd_dev, "sd-bus"),
682 &error_fatal);
685 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
687 SiFiveUState *s = RISCV_U_MACHINE(obj);
689 return s->start_in_flash;
692 static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp)
694 SiFiveUState *s = RISCV_U_MACHINE(obj);
696 s->start_in_flash = value;
699 static void sifive_u_machine_instance_init(Object *obj)
701 SiFiveUState *s = RISCV_U_MACHINE(obj);
703 s->start_in_flash = false;
704 s->msel = 0;
705 object_property_add_uint32_ptr(obj, "msel", &s->msel,
706 OBJ_PROP_FLAG_READWRITE);
707 object_property_set_description(obj, "msel",
708 "Mode Select (MSEL[3:0]) pin state");
710 s->serial = OTP_SERIAL;
711 object_property_add_uint32_ptr(obj, "serial", &s->serial,
712 OBJ_PROP_FLAG_READWRITE);
713 object_property_set_description(obj, "serial", "Board serial number");
716 static void sifive_u_machine_class_init(ObjectClass *oc, void *data)
718 MachineClass *mc = MACHINE_CLASS(oc);
720 mc->desc = "RISC-V Board compatible with SiFive U SDK";
721 mc->init = sifive_u_machine_init;
722 mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
723 mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1;
724 mc->default_cpu_type = SIFIVE_U_CPU;
725 mc->default_cpus = mc->min_cpus;
726 mc->default_ram_id = "riscv.sifive.u.ram";
728 object_class_property_add_bool(oc, "start-in-flash",
729 sifive_u_machine_get_start_in_flash,
730 sifive_u_machine_set_start_in_flash);
731 object_class_property_set_description(oc, "start-in-flash",
732 "Set on to tell QEMU's ROM to jump to "
733 "flash. Otherwise QEMU will jump to DRAM "
734 "or L2LIM depending on the msel value");
737 static const TypeInfo sifive_u_machine_typeinfo = {
738 .name = MACHINE_TYPE_NAME("sifive_u"),
739 .parent = TYPE_MACHINE,
740 .class_init = sifive_u_machine_class_init,
741 .instance_init = sifive_u_machine_instance_init,
742 .instance_size = sizeof(SiFiveUState),
745 static void sifive_u_machine_init_register_types(void)
747 type_register_static(&sifive_u_machine_typeinfo);
750 type_init(sifive_u_machine_init_register_types)
752 static void sifive_u_soc_instance_init(Object *obj)
754 SiFiveUSoCState *s = RISCV_U_SOC(obj);
756 object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
757 qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
759 object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
760 TYPE_RISCV_HART_ARRAY);
761 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
762 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
763 qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU);
764 qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004);
766 object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
767 qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
769 object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
770 TYPE_RISCV_HART_ARRAY);
772 object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI);
773 object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP);
774 object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM);
775 object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
776 object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
777 object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
778 object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
779 object_initialize_child(obj, "pwm0", &s->pwm[0], TYPE_SIFIVE_PWM);
780 object_initialize_child(obj, "pwm1", &s->pwm[1], TYPE_SIFIVE_PWM);
783 static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
785 MachineState *ms = MACHINE(qdev_get_machine());
786 SiFiveUSoCState *s = RISCV_U_SOC(dev);
787 const MemMapEntry *memmap = sifive_u_memmap;
788 MemoryRegion *system_memory = get_system_memory();
789 MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
790 MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
791 char *plic_hart_config;
792 int i, j;
793 NICInfo *nd = &nd_table[0];
795 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
796 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
797 qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", s->cpu_type);
798 qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004);
800 sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_fatal);
801 sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_fatal);
803 * The cluster must be realized after the RISC-V hart array container,
804 * as the container's CPU object is only created on realize, and the
805 * CPU must exist and have been parented into the cluster before the
806 * cluster is realized.
808 qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
809 qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
811 /* boot rom */
812 memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom",
813 memmap[SIFIVE_U_DEV_MROM].size, &error_fatal);
814 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_MROM].base,
815 mask_rom);
818 * Add L2-LIM at reset size.
819 * This should be reduced in size as the L2 Cache Controller WayEnable
820 * register is incremented. Unfortunately I don't see a nice (or any) way
821 * to handle reducing or blocking out the L2 LIM while still allowing it
822 * be re returned to all enabled after a reset. For the time being, just
823 * leave it enabled all the time. This won't break anything, but will be
824 * too generous to misbehaving guests.
826 memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim",
827 memmap[SIFIVE_U_DEV_L2LIM].size, &error_fatal);
828 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_L2LIM].base,
829 l2lim_mem);
831 /* create PLIC hart topology configuration string */
832 plic_hart_config = riscv_plic_hart_config_string(ms->smp.cpus);
834 /* MMIO */
835 s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base,
836 plic_hart_config, ms->smp.cpus, 0,
837 SIFIVE_U_PLIC_NUM_SOURCES,
838 SIFIVE_U_PLIC_NUM_PRIORITIES,
839 SIFIVE_U_PLIC_PRIORITY_BASE,
840 SIFIVE_U_PLIC_PENDING_BASE,
841 SIFIVE_U_PLIC_ENABLE_BASE,
842 SIFIVE_U_PLIC_ENABLE_STRIDE,
843 SIFIVE_U_PLIC_CONTEXT_BASE,
844 SIFIVE_U_PLIC_CONTEXT_STRIDE,
845 memmap[SIFIVE_U_DEV_PLIC].size);
846 g_free(plic_hart_config);
847 sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART0].base,
848 serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ));
849 sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base,
850 serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ));
851 riscv_aclint_swi_create(memmap[SIFIVE_U_DEV_CLINT].base, 0,
852 ms->smp.cpus, false);
853 riscv_aclint_mtimer_create(memmap[SIFIVE_U_DEV_CLINT].base +
854 RISCV_ACLINT_SWI_SIZE,
855 RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
856 RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
857 CLINT_TIMEBASE_FREQ, false);
859 if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
860 return;
862 sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_DEV_PRCI].base);
864 qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16);
865 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
866 return;
868 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_DEV_GPIO].base);
870 /* Pass all GPIOs to the SOC layer so they are available to the board */
871 qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL);
873 /* Connect GPIO interrupts to the PLIC */
874 for (i = 0; i < 16; i++) {
875 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i,
876 qdev_get_gpio_in(DEVICE(s->plic),
877 SIFIVE_U_GPIO_IRQ0 + i));
880 /* PDMA */
881 sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp);
882 sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_DEV_PDMA].base);
884 /* Connect PDMA interrupts to the PLIC */
885 for (i = 0; i < SIFIVE_PDMA_IRQS; i++) {
886 sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i,
887 qdev_get_gpio_in(DEVICE(s->plic),
888 SIFIVE_U_PDMA_IRQ0 + i));
891 qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial);
892 if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) {
893 return;
895 sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_DEV_OTP].base);
897 /* FIXME use qdev NIC properties instead of nd_table[] */
898 if (nd->used) {
899 qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
900 qdev_set_nic_properties(DEVICE(&s->gem), nd);
902 object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION,
903 &error_abort);
904 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) {
905 return;
907 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_DEV_GEM].base);
908 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
909 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ));
911 /* PWM */
912 for (i = 0; i < 2; i++) {
913 if (!sysbus_realize(SYS_BUS_DEVICE(&s->pwm[i]), errp)) {
914 return;
916 sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwm[i]), 0,
917 memmap[SIFIVE_U_DEV_PWM0].base + (0x1000 * i));
919 /* Connect PWM interrupts to the PLIC */
920 for (j = 0; j < SIFIVE_PWM_IRQS; j++) {
921 sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwm[i]), j,
922 qdev_get_gpio_in(DEVICE(s->plic),
923 SIFIVE_U_PWM0_IRQ0 + (i * 4) + j));
927 create_unimplemented_device("riscv.sifive.u.gem-mgmt",
928 memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
930 create_unimplemented_device("riscv.sifive.u.dmc",
931 memmap[SIFIVE_U_DEV_DMC].base, memmap[SIFIVE_U_DEV_DMC].size);
933 create_unimplemented_device("riscv.sifive.u.l2cc",
934 memmap[SIFIVE_U_DEV_L2CC].base, memmap[SIFIVE_U_DEV_L2CC].size);
936 sysbus_realize(SYS_BUS_DEVICE(&s->spi0), errp);
937 sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi0), 0,
938 memmap[SIFIVE_U_DEV_QSPI0].base);
939 sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0,
940 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ));
941 sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp);
942 sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0,
943 memmap[SIFIVE_U_DEV_QSPI2].base);
944 sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0,
945 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ));
948 static Property sifive_u_soc_props[] = {
949 DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL),
950 DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState, cpu_type),
951 DEFINE_PROP_END_OF_LIST()
954 static void sifive_u_soc_class_init(ObjectClass *oc, void *data)
956 DeviceClass *dc = DEVICE_CLASS(oc);
958 device_class_set_props(dc, sifive_u_soc_props);
959 dc->realize = sifive_u_soc_realize;
960 /* Reason: Uses serial_hds in realize function, thus can't be used twice */
961 dc->user_creatable = false;
964 static const TypeInfo sifive_u_soc_type_info = {
965 .name = TYPE_RISCV_U_SOC,
966 .parent = TYPE_DEVICE,
967 .instance_size = sizeof(SiFiveUSoCState),
968 .instance_init = sifive_u_soc_instance_init,
969 .class_init = sifive_u_soc_class_init,
972 static void sifive_u_soc_register_types(void)
974 type_register_static(&sifive_u_soc_type_info);
977 type_init(sifive_u_soc_register_types)