2 * Emulation of Linux signals
4 * Copyright (c) 2003 Fabrice Bellard
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
19 #include "qemu/osdep.h"
20 #include "qemu/bitops.h"
21 #include "gdbstub/user.h"
22 #include "hw/core/tcg-cpu-ops.h"
24 #include <sys/ucontext.h>
25 #include <sys/resource.h>
28 #include "user-internals.h"
32 #include "signal-common.h"
33 #include "host-signal.h"
34 #include "user/safe-syscall.h"
36 static struct target_sigaction sigact_table
[TARGET_NSIG
];
38 static void host_signal_handler(int host_signum
, siginfo_t
*info
,
41 /* Fallback addresses into sigtramp page. */
42 abi_ulong default_sigreturn
;
43 abi_ulong default_rt_sigreturn
;
46 * System includes define _NSIG as SIGRTMAX + 1,
47 * but qemu (like the kernel) defines TARGET_NSIG as TARGET_SIGRTMAX
48 * and the first signal is SIGHUP defined as 1
49 * Signal number 0 is reserved for use as kill(pid, 0), to test whether
50 * a process exists without sending it a signal.
53 QEMU_BUILD_BUG_ON(__SIGRTMAX
+ 1 != _NSIG
);
55 static uint8_t host_to_target_signal_table
[_NSIG
] = {
56 #define MAKE_SIG_ENTRY(sig) [sig] = TARGET_##sig,
59 /* next signals stay the same */
62 static uint8_t target_to_host_signal_table
[TARGET_NSIG
+ 1];
64 /* valid sig is between 1 and _NSIG - 1 */
65 int host_to_target_signal(int sig
)
67 if (sig
< 1 || sig
>= _NSIG
) {
70 return host_to_target_signal_table
[sig
];
73 /* valid sig is between 1 and TARGET_NSIG */
74 int target_to_host_signal(int sig
)
76 if (sig
< 1 || sig
> TARGET_NSIG
) {
79 return target_to_host_signal_table
[sig
];
82 static inline void target_sigaddset(target_sigset_t
*set
, int signum
)
85 abi_ulong mask
= (abi_ulong
)1 << (signum
% TARGET_NSIG_BPW
);
86 set
->sig
[signum
/ TARGET_NSIG_BPW
] |= mask
;
89 static inline int target_sigismember(const target_sigset_t
*set
, int signum
)
92 abi_ulong mask
= (abi_ulong
)1 << (signum
% TARGET_NSIG_BPW
);
93 return ((set
->sig
[signum
/ TARGET_NSIG_BPW
] & mask
) != 0);
96 void host_to_target_sigset_internal(target_sigset_t
*d
,
99 int host_sig
, target_sig
;
100 target_sigemptyset(d
);
101 for (host_sig
= 1; host_sig
< _NSIG
; host_sig
++) {
102 target_sig
= host_to_target_signal(host_sig
);
103 if (target_sig
< 1 || target_sig
> TARGET_NSIG
) {
106 if (sigismember(s
, host_sig
)) {
107 target_sigaddset(d
, target_sig
);
112 void host_to_target_sigset(target_sigset_t
*d
, const sigset_t
*s
)
117 host_to_target_sigset_internal(&d1
, s
);
118 for(i
= 0;i
< TARGET_NSIG_WORDS
; i
++)
119 d
->sig
[i
] = tswapal(d1
.sig
[i
]);
122 void target_to_host_sigset_internal(sigset_t
*d
,
123 const target_sigset_t
*s
)
125 int host_sig
, target_sig
;
127 for (target_sig
= 1; target_sig
<= TARGET_NSIG
; target_sig
++) {
128 host_sig
= target_to_host_signal(target_sig
);
129 if (host_sig
< 1 || host_sig
>= _NSIG
) {
132 if (target_sigismember(s
, target_sig
)) {
133 sigaddset(d
, host_sig
);
138 void target_to_host_sigset(sigset_t
*d
, const target_sigset_t
*s
)
143 for(i
= 0;i
< TARGET_NSIG_WORDS
; i
++)
144 s1
.sig
[i
] = tswapal(s
->sig
[i
]);
145 target_to_host_sigset_internal(d
, &s1
);
148 void host_to_target_old_sigset(abi_ulong
*old_sigset
,
149 const sigset_t
*sigset
)
152 host_to_target_sigset(&d
, sigset
);
153 *old_sigset
= d
.sig
[0];
156 void target_to_host_old_sigset(sigset_t
*sigset
,
157 const abi_ulong
*old_sigset
)
162 d
.sig
[0] = *old_sigset
;
163 for(i
= 1;i
< TARGET_NSIG_WORDS
; i
++)
165 target_to_host_sigset(sigset
, &d
);
168 int block_signals(void)
170 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
173 /* It's OK to block everything including SIGSEGV, because we won't
174 * run any further guest code before unblocking signals in
175 * process_pending_signals().
178 sigprocmask(SIG_SETMASK
, &set
, 0);
180 return qatomic_xchg(&ts
->signal_pending
, 1);
183 /* Wrapper for sigprocmask function
184 * Emulates a sigprocmask in a safe way for the guest. Note that set and oldset
185 * are host signal set, not guest ones. Returns -QEMU_ERESTARTSYS if
186 * a signal was already pending and the syscall must be restarted, or
188 * If set is NULL, this is guaranteed not to fail.
190 int do_sigprocmask(int how
, const sigset_t
*set
, sigset_t
*oldset
)
192 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
195 *oldset
= ts
->signal_mask
;
201 if (block_signals()) {
202 return -QEMU_ERESTARTSYS
;
207 sigorset(&ts
->signal_mask
, &ts
->signal_mask
, set
);
210 for (i
= 1; i
<= NSIG
; ++i
) {
211 if (sigismember(set
, i
)) {
212 sigdelset(&ts
->signal_mask
, i
);
217 ts
->signal_mask
= *set
;
220 g_assert_not_reached();
223 /* Silently ignore attempts to change blocking status of KILL or STOP */
224 sigdelset(&ts
->signal_mask
, SIGKILL
);
225 sigdelset(&ts
->signal_mask
, SIGSTOP
);
230 /* Just set the guest's signal mask to the specified value; the
231 * caller is assumed to have called block_signals() already.
233 void set_sigmask(const sigset_t
*set
)
235 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
237 ts
->signal_mask
= *set
;
240 /* sigaltstack management */
242 int on_sig_stack(unsigned long sp
)
244 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
246 return (sp
- ts
->sigaltstack_used
.ss_sp
247 < ts
->sigaltstack_used
.ss_size
);
250 int sas_ss_flags(unsigned long sp
)
252 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
254 return (ts
->sigaltstack_used
.ss_size
== 0 ? SS_DISABLE
255 : on_sig_stack(sp
) ? SS_ONSTACK
: 0);
258 abi_ulong
target_sigsp(abi_ulong sp
, struct target_sigaction
*ka
)
261 * This is the X/Open sanctioned signal stack switching.
263 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
265 if ((ka
->sa_flags
& TARGET_SA_ONSTACK
) && !sas_ss_flags(sp
)) {
266 return ts
->sigaltstack_used
.ss_sp
+ ts
->sigaltstack_used
.ss_size
;
271 void target_save_altstack(target_stack_t
*uss
, CPUArchState
*env
)
273 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
275 __put_user(ts
->sigaltstack_used
.ss_sp
, &uss
->ss_sp
);
276 __put_user(sas_ss_flags(get_sp_from_cpustate(env
)), &uss
->ss_flags
);
277 __put_user(ts
->sigaltstack_used
.ss_size
, &uss
->ss_size
);
280 abi_long
target_restore_altstack(target_stack_t
*uss
, CPUArchState
*env
)
282 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
283 size_t minstacksize
= TARGET_MINSIGSTKSZ
;
286 #if defined(TARGET_PPC64)
287 /* ELF V2 for PPC64 has a 4K minimum stack size for signal handlers */
288 struct image_info
*image
= ts
->info
;
289 if (get_ppc64_abi(image
) > 1) {
294 __get_user(ss
.ss_sp
, &uss
->ss_sp
);
295 __get_user(ss
.ss_size
, &uss
->ss_size
);
296 __get_user(ss
.ss_flags
, &uss
->ss_flags
);
298 if (on_sig_stack(get_sp_from_cpustate(env
))) {
299 return -TARGET_EPERM
;
302 switch (ss
.ss_flags
) {
304 return -TARGET_EINVAL
;
306 case TARGET_SS_DISABLE
:
311 case TARGET_SS_ONSTACK
:
313 if (ss
.ss_size
< minstacksize
) {
314 return -TARGET_ENOMEM
;
319 ts
->sigaltstack_used
.ss_sp
= ss
.ss_sp
;
320 ts
->sigaltstack_used
.ss_size
= ss
.ss_size
;
324 /* siginfo conversion */
326 static inline void host_to_target_siginfo_noswap(target_siginfo_t
*tinfo
,
327 const siginfo_t
*info
)
329 int sig
= host_to_target_signal(info
->si_signo
);
330 int si_code
= info
->si_code
;
332 tinfo
->si_signo
= sig
;
334 tinfo
->si_code
= info
->si_code
;
336 /* This memset serves two purposes:
337 * (1) ensure we don't leak random junk to the guest later
338 * (2) placate false positives from gcc about fields
339 * being used uninitialized if it chooses to inline both this
340 * function and tswap_siginfo() into host_to_target_siginfo().
342 memset(tinfo
->_sifields
._pad
, 0, sizeof(tinfo
->_sifields
._pad
));
344 /* This is awkward, because we have to use a combination of
345 * the si_code and si_signo to figure out which of the union's
346 * members are valid. (Within the host kernel it is always possible
347 * to tell, but the kernel carefully avoids giving userspace the
348 * high 16 bits of si_code, so we don't have the information to
349 * do this the easy way...) We therefore make our best guess,
350 * bearing in mind that a guest can spoof most of the si_codes
351 * via rt_sigqueueinfo() if it likes.
353 * Once we have made our guess, we record it in the top 16 bits of
354 * the si_code, so that tswap_siginfo() later can use it.
355 * tswap_siginfo() will strip these top bits out before writing
356 * si_code to the guest (sign-extending the lower bits).
363 /* Sent via kill(), tkill() or tgkill(), or direct from the kernel.
364 * These are the only unspoofable si_code values.
366 tinfo
->_sifields
._kill
._pid
= info
->si_pid
;
367 tinfo
->_sifields
._kill
._uid
= info
->si_uid
;
368 si_type
= QEMU_SI_KILL
;
371 /* Everything else is spoofable. Make best guess based on signal */
374 tinfo
->_sifields
._sigchld
._pid
= info
->si_pid
;
375 tinfo
->_sifields
._sigchld
._uid
= info
->si_uid
;
376 if (si_code
== CLD_EXITED
)
377 tinfo
->_sifields
._sigchld
._status
= info
->si_status
;
379 tinfo
->_sifields
._sigchld
._status
380 = host_to_target_signal(info
->si_status
& 0x7f)
381 | (info
->si_status
& ~0x7f);
382 tinfo
->_sifields
._sigchld
._utime
= info
->si_utime
;
383 tinfo
->_sifields
._sigchld
._stime
= info
->si_stime
;
384 si_type
= QEMU_SI_CHLD
;
387 tinfo
->_sifields
._sigpoll
._band
= info
->si_band
;
388 tinfo
->_sifields
._sigpoll
._fd
= info
->si_fd
;
389 si_type
= QEMU_SI_POLL
;
392 /* Assume a sigqueue()/mq_notify()/rt_sigqueueinfo() source. */
393 tinfo
->_sifields
._rt
._pid
= info
->si_pid
;
394 tinfo
->_sifields
._rt
._uid
= info
->si_uid
;
395 /* XXX: potential problem if 64 bit */
396 tinfo
->_sifields
._rt
._sigval
.sival_ptr
397 = (abi_ulong
)(unsigned long)info
->si_value
.sival_ptr
;
398 si_type
= QEMU_SI_RT
;
404 tinfo
->si_code
= deposit32(si_code
, 16, 16, si_type
);
407 void tswap_siginfo(target_siginfo_t
*tinfo
,
408 const target_siginfo_t
*info
)
410 int si_type
= extract32(info
->si_code
, 16, 16);
411 int si_code
= sextract32(info
->si_code
, 0, 16);
413 __put_user(info
->si_signo
, &tinfo
->si_signo
);
414 __put_user(info
->si_errno
, &tinfo
->si_errno
);
415 __put_user(si_code
, &tinfo
->si_code
);
417 /* We can use our internal marker of which fields in the structure
418 * are valid, rather than duplicating the guesswork of
419 * host_to_target_siginfo_noswap() here.
423 __put_user(info
->_sifields
._kill
._pid
, &tinfo
->_sifields
._kill
._pid
);
424 __put_user(info
->_sifields
._kill
._uid
, &tinfo
->_sifields
._kill
._uid
);
427 __put_user(info
->_sifields
._timer
._timer1
,
428 &tinfo
->_sifields
._timer
._timer1
);
429 __put_user(info
->_sifields
._timer
._timer2
,
430 &tinfo
->_sifields
._timer
._timer2
);
433 __put_user(info
->_sifields
._sigpoll
._band
,
434 &tinfo
->_sifields
._sigpoll
._band
);
435 __put_user(info
->_sifields
._sigpoll
._fd
,
436 &tinfo
->_sifields
._sigpoll
._fd
);
439 __put_user(info
->_sifields
._sigfault
._addr
,
440 &tinfo
->_sifields
._sigfault
._addr
);
443 __put_user(info
->_sifields
._sigchld
._pid
,
444 &tinfo
->_sifields
._sigchld
._pid
);
445 __put_user(info
->_sifields
._sigchld
._uid
,
446 &tinfo
->_sifields
._sigchld
._uid
);
447 __put_user(info
->_sifields
._sigchld
._status
,
448 &tinfo
->_sifields
._sigchld
._status
);
449 __put_user(info
->_sifields
._sigchld
._utime
,
450 &tinfo
->_sifields
._sigchld
._utime
);
451 __put_user(info
->_sifields
._sigchld
._stime
,
452 &tinfo
->_sifields
._sigchld
._stime
);
455 __put_user(info
->_sifields
._rt
._pid
, &tinfo
->_sifields
._rt
._pid
);
456 __put_user(info
->_sifields
._rt
._uid
, &tinfo
->_sifields
._rt
._uid
);
457 __put_user(info
->_sifields
._rt
._sigval
.sival_ptr
,
458 &tinfo
->_sifields
._rt
._sigval
.sival_ptr
);
461 g_assert_not_reached();
465 void host_to_target_siginfo(target_siginfo_t
*tinfo
, const siginfo_t
*info
)
467 target_siginfo_t tgt_tmp
;
468 host_to_target_siginfo_noswap(&tgt_tmp
, info
);
469 tswap_siginfo(tinfo
, &tgt_tmp
);
472 /* XXX: we support only POSIX RT signals are used. */
473 /* XXX: find a solution for 64 bit (additional malloced data is needed) */
474 void target_to_host_siginfo(siginfo_t
*info
, const target_siginfo_t
*tinfo
)
476 /* This conversion is used only for the rt_sigqueueinfo syscall,
477 * and so we know that the _rt fields are the valid ones.
481 __get_user(info
->si_signo
, &tinfo
->si_signo
);
482 __get_user(info
->si_errno
, &tinfo
->si_errno
);
483 __get_user(info
->si_code
, &tinfo
->si_code
);
484 __get_user(info
->si_pid
, &tinfo
->_sifields
._rt
._pid
);
485 __get_user(info
->si_uid
, &tinfo
->_sifields
._rt
._uid
);
486 __get_user(sival_ptr
, &tinfo
->_sifields
._rt
._sigval
.sival_ptr
);
487 info
->si_value
.sival_ptr
= (void *)(long)sival_ptr
;
490 static int fatal_signal (int sig
)
495 case TARGET_SIGWINCH
:
496 /* Ignored by default. */
503 /* Job control signals. */
510 /* returns 1 if given signal should dump core if not handled */
511 static int core_dump_signal(int sig
)
527 static void signal_table_init(void)
529 int host_sig
, target_sig
, count
;
532 * Signals are supported starting from TARGET_SIGRTMIN and going up
533 * until we run out of host realtime signals.
534 * glibc at least uses only the lower 2 rt signals and probably
535 * nobody's using the upper ones.
536 * it's why SIGRTMIN (34) is generally greater than __SIGRTMIN (32)
537 * To fix this properly we need to do manual signal delivery multiplexed
538 * over a single host signal.
539 * Attempts for configure "missing" signals via sigaction will be
542 for (host_sig
= SIGRTMIN
; host_sig
<= SIGRTMAX
; host_sig
++) {
543 target_sig
= host_sig
- SIGRTMIN
+ TARGET_SIGRTMIN
;
544 if (target_sig
<= TARGET_NSIG
) {
545 host_to_target_signal_table
[host_sig
] = target_sig
;
549 /* generate signal conversion tables */
550 for (target_sig
= 1; target_sig
<= TARGET_NSIG
; target_sig
++) {
551 target_to_host_signal_table
[target_sig
] = _NSIG
; /* poison */
553 for (host_sig
= 1; host_sig
< _NSIG
; host_sig
++) {
554 if (host_to_target_signal_table
[host_sig
] == 0) {
555 host_to_target_signal_table
[host_sig
] = host_sig
;
557 target_sig
= host_to_target_signal_table
[host_sig
];
558 if (target_sig
<= TARGET_NSIG
) {
559 target_to_host_signal_table
[target_sig
] = host_sig
;
563 if (trace_event_get_state_backends(TRACE_SIGNAL_TABLE_INIT
)) {
564 for (target_sig
= 1, count
= 0; target_sig
<= TARGET_NSIG
; target_sig
++) {
565 if (target_to_host_signal_table
[target_sig
] == _NSIG
) {
569 trace_signal_table_init(count
);
573 void signal_init(void)
575 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
576 struct sigaction act
;
577 struct sigaction oact
;
581 /* initialize signal conversion tables */
584 /* Set the signal mask from the host mask. */
585 sigprocmask(0, 0, &ts
->signal_mask
);
587 sigfillset(&act
.sa_mask
);
588 act
.sa_flags
= SA_SIGINFO
;
589 act
.sa_sigaction
= host_signal_handler
;
590 for(i
= 1; i
<= TARGET_NSIG
; i
++) {
592 if (i
== TARGET_SIGPROF
) {
596 host_sig
= target_to_host_signal(i
);
597 sigaction(host_sig
, NULL
, &oact
);
598 if (oact
.sa_sigaction
== (void *)SIG_IGN
) {
599 sigact_table
[i
- 1]._sa_handler
= TARGET_SIG_IGN
;
600 } else if (oact
.sa_sigaction
== (void *)SIG_DFL
) {
601 sigact_table
[i
- 1]._sa_handler
= TARGET_SIG_DFL
;
603 /* If there's already a handler installed then something has
604 gone horribly wrong, so don't even try to handle that case. */
605 /* Install some handlers for our own use. We need at least
606 SIGSEGV and SIGBUS, to detect exceptions. We can not just
607 trap all signals because it affects syscall interrupt
608 behavior. But do trap all default-fatal signals. */
609 if (fatal_signal (i
))
610 sigaction(host_sig
, &act
, NULL
);
614 /* Force a synchronously taken signal. The kernel force_sig() function
615 * also forces the signal to "not blocked, not ignored", but for QEMU
616 * that work is done in process_pending_signals().
618 void force_sig(int sig
)
620 CPUState
*cpu
= thread_cpu
;
621 CPUArchState
*env
= cpu
->env_ptr
;
622 target_siginfo_t info
= {};
626 info
.si_code
= TARGET_SI_KERNEL
;
627 info
._sifields
._kill
._pid
= 0;
628 info
._sifields
._kill
._uid
= 0;
629 queue_signal(env
, info
.si_signo
, QEMU_SI_KILL
, &info
);
633 * Force a synchronously taken QEMU_SI_FAULT signal. For QEMU the
634 * 'force' part is handled in process_pending_signals().
636 void force_sig_fault(int sig
, int code
, abi_ulong addr
)
638 CPUState
*cpu
= thread_cpu
;
639 CPUArchState
*env
= cpu
->env_ptr
;
640 target_siginfo_t info
= {};
645 info
._sifields
._sigfault
._addr
= addr
;
646 queue_signal(env
, sig
, QEMU_SI_FAULT
, &info
);
649 /* Force a SIGSEGV if we couldn't write to memory trying to set
650 * up the signal frame. oldsig is the signal we were trying to handle
651 * at the point of failure.
653 #if !defined(TARGET_RISCV)
654 void force_sigsegv(int oldsig
)
656 if (oldsig
== SIGSEGV
) {
657 /* Make sure we don't try to deliver the signal again; this will
658 * end up with handle_pending_signal() calling dump_core_and_abort().
660 sigact_table
[oldsig
- 1]._sa_handler
= TARGET_SIG_DFL
;
662 force_sig(TARGET_SIGSEGV
);
666 void cpu_loop_exit_sigsegv(CPUState
*cpu
, target_ulong addr
,
667 MMUAccessType access_type
, bool maperr
, uintptr_t ra
)
669 const struct TCGCPUOps
*tcg_ops
= CPU_GET_CLASS(cpu
)->tcg_ops
;
671 if (tcg_ops
->record_sigsegv
) {
672 tcg_ops
->record_sigsegv(cpu
, addr
, access_type
, maperr
, ra
);
675 force_sig_fault(TARGET_SIGSEGV
,
676 maperr
? TARGET_SEGV_MAPERR
: TARGET_SEGV_ACCERR
,
678 cpu
->exception_index
= EXCP_INTERRUPT
;
679 cpu_loop_exit_restore(cpu
, ra
);
682 void cpu_loop_exit_sigbus(CPUState
*cpu
, target_ulong addr
,
683 MMUAccessType access_type
, uintptr_t ra
)
685 const struct TCGCPUOps
*tcg_ops
= CPU_GET_CLASS(cpu
)->tcg_ops
;
687 if (tcg_ops
->record_sigbus
) {
688 tcg_ops
->record_sigbus(cpu
, addr
, access_type
, ra
);
691 force_sig_fault(TARGET_SIGBUS
, TARGET_BUS_ADRALN
, addr
);
692 cpu
->exception_index
= EXCP_INTERRUPT
;
693 cpu_loop_exit_restore(cpu
, ra
);
696 /* abort execution with signal */
698 void dump_core_and_abort(CPUArchState
*cpu_env
, int target_sig
)
700 CPUState
*cpu
= thread_cpu
;
701 CPUArchState
*env
= cpu
->env_ptr
;
702 TaskState
*ts
= (TaskState
*)cpu
->opaque
;
703 int host_sig
, core_dumped
= 0;
704 struct sigaction act
;
706 host_sig
= target_to_host_signal(target_sig
);
707 trace_user_dump_core_and_abort(env
, target_sig
, host_sig
);
708 gdb_signalled(env
, target_sig
);
710 /* dump core if supported by target binary format */
711 if (core_dump_signal(target_sig
) && (ts
->bprm
->core_dump
!= NULL
)) {
714 ((*ts
->bprm
->core_dump
)(target_sig
, env
) == 0);
717 /* we already dumped the core of target process, we don't want
718 * a coredump of qemu itself */
719 struct rlimit nodump
;
720 getrlimit(RLIMIT_CORE
, &nodump
);
722 setrlimit(RLIMIT_CORE
, &nodump
);
723 (void) fprintf(stderr
, "qemu: uncaught target signal %d (%s) - %s\n",
724 target_sig
, strsignal(host_sig
), "core dumped" );
727 preexit_cleanup(cpu_env
, 128 + target_sig
);
729 /* The proper exit code for dying from an uncaught signal is
730 * -<signal>. The kernel doesn't allow exit() or _exit() to pass
731 * a negative value. To get the proper exit code we need to
732 * actually die from an uncaught signal. Here the default signal
733 * handler is installed, we send ourself a signal and we wait for
735 sigfillset(&act
.sa_mask
);
736 act
.sa_handler
= SIG_DFL
;
738 sigaction(host_sig
, &act
, NULL
);
740 /* For some reason raise(host_sig) doesn't send the signal when
741 * statically linked on x86-64. */
742 kill(getpid(), host_sig
);
744 /* Make sure the signal isn't masked (just reuse the mask inside
746 sigdelset(&act
.sa_mask
, host_sig
);
747 sigsuspend(&act
.sa_mask
);
753 /* queue a signal so that it will be send to the virtual CPU as soon
755 void queue_signal(CPUArchState
*env
, int sig
, int si_type
,
756 target_siginfo_t
*info
)
758 CPUState
*cpu
= env_cpu(env
);
759 TaskState
*ts
= cpu
->opaque
;
761 trace_user_queue_signal(env
, sig
);
763 info
->si_code
= deposit32(info
->si_code
, 16, 16, si_type
);
765 ts
->sync_signal
.info
= *info
;
766 ts
->sync_signal
.pending
= sig
;
767 /* signal that a new signal is pending */
768 qatomic_set(&ts
->signal_pending
, 1);
772 /* Adjust the signal context to rewind out of safe-syscall if we're in it */
773 static inline void rewind_if_in_safe_syscall(void *puc
)
775 host_sigcontext
*uc
= (host_sigcontext
*)puc
;
776 uintptr_t pcreg
= host_signal_pc(uc
);
778 if (pcreg
> (uintptr_t)safe_syscall_start
779 && pcreg
< (uintptr_t)safe_syscall_end
) {
780 host_signal_set_pc(uc
, (uintptr_t)safe_syscall_start
);
784 static void host_signal_handler(int host_sig
, siginfo_t
*info
, void *puc
)
786 CPUArchState
*env
= thread_cpu
->env_ptr
;
787 CPUState
*cpu
= env_cpu(env
);
788 TaskState
*ts
= cpu
->opaque
;
789 target_siginfo_t tinfo
;
790 host_sigcontext
*uc
= puc
;
791 struct emulated_sigtable
*k
;
794 bool sync_sig
= false;
795 void *sigmask
= host_signal_mask(uc
);
798 * Non-spoofed SIGSEGV and SIGBUS are synchronous, and need special
799 * handling wrt signal blocking and unwinding.
801 if ((host_sig
== SIGSEGV
|| host_sig
== SIGBUS
) && info
->si_code
> 0) {
802 MMUAccessType access_type
;
807 host_addr
= (uintptr_t)info
->si_addr
;
810 * Convert forcefully to guest address space: addresses outside
811 * reserved_va are still valid to report via SEGV_MAPERR.
813 guest_addr
= h2g_nocheck(host_addr
);
815 pc
= host_signal_pc(uc
);
816 is_write
= host_signal_write(info
, uc
);
817 access_type
= adjust_signal_pc(&pc
, is_write
);
819 if (host_sig
== SIGSEGV
) {
822 if (info
->si_code
== SEGV_ACCERR
&& h2g_valid(host_addr
)) {
823 /* If this was a write to a TB protected page, restart. */
825 handle_sigsegv_accerr_write(cpu
, sigmask
, pc
, guest_addr
)) {
830 * With reserved_va, the whole address space is PROT_NONE,
831 * which means that we may get ACCERR when we want MAPERR.
833 if (page_get_flags(guest_addr
) & PAGE_VALID
) {
836 info
->si_code
= SEGV_MAPERR
;
840 sigprocmask(SIG_SETMASK
, sigmask
, NULL
);
841 cpu_loop_exit_sigsegv(cpu
, guest_addr
, access_type
, maperr
, pc
);
843 sigprocmask(SIG_SETMASK
, sigmask
, NULL
);
844 if (info
->si_code
== BUS_ADRALN
) {
845 cpu_loop_exit_sigbus(cpu
, guest_addr
, access_type
, pc
);
852 /* get target signal number */
853 guest_sig
= host_to_target_signal(host_sig
);
854 if (guest_sig
< 1 || guest_sig
> TARGET_NSIG
) {
857 trace_user_host_signal(env
, host_sig
, guest_sig
);
859 host_to_target_siginfo_noswap(&tinfo
, info
);
860 k
= &ts
->sigtab
[guest_sig
- 1];
862 k
->pending
= guest_sig
;
863 ts
->signal_pending
= 1;
866 * For synchronous signals, unwind the cpu state to the faulting
867 * insn and then exit back to the main loop so that the signal
868 * is delivered immediately.
871 cpu
->exception_index
= EXCP_INTERRUPT
;
872 cpu_loop_exit_restore(cpu
, pc
);
875 rewind_if_in_safe_syscall(puc
);
878 * Block host signals until target signal handler entered. We
879 * can't block SIGSEGV or SIGBUS while we're executing guest
880 * code in case the guest code provokes one in the window between
881 * now and it getting out to the main loop. Signals will be
882 * unblocked again in process_pending_signals().
884 * WARNING: we cannot use sigfillset() here because the sigmask
885 * field is a kernel sigset_t, which is much smaller than the
886 * libc sigset_t which sigfillset() operates on. Using sigfillset()
887 * would write 0xff bytes off the end of the structure and trash
888 * data on the struct.
890 memset(sigmask
, 0xff, SIGSET_T_SIZE
);
891 sigdelset(sigmask
, SIGSEGV
);
892 sigdelset(sigmask
, SIGBUS
);
894 /* interrupt the virtual CPU as soon as possible */
895 cpu_exit(thread_cpu
);
898 /* do_sigaltstack() returns target values and errnos. */
899 /* compare linux/kernel/signal.c:do_sigaltstack() */
900 abi_long
do_sigaltstack(abi_ulong uss_addr
, abi_ulong uoss_addr
,
903 target_stack_t oss
, *uoss
= NULL
;
904 abi_long ret
= -TARGET_EFAULT
;
907 /* Verify writability now, but do not alter user memory yet. */
908 if (!lock_user_struct(VERIFY_WRITE
, uoss
, uoss_addr
, 0)) {
911 target_save_altstack(&oss
, env
);
917 if (!lock_user_struct(VERIFY_READ
, uss
, uss_addr
, 1)) {
920 ret
= target_restore_altstack(uss
, env
);
927 memcpy(uoss
, &oss
, sizeof(oss
));
928 unlock_user_struct(uoss
, uoss_addr
, 1);
935 unlock_user_struct(uoss
, uoss_addr
, 0);
940 /* do_sigaction() return target values and host errnos */
941 int do_sigaction(int sig
, const struct target_sigaction
*act
,
942 struct target_sigaction
*oact
, abi_ulong ka_restorer
)
944 struct target_sigaction
*k
;
945 struct sigaction act1
;
949 trace_signal_do_sigaction_guest(sig
, TARGET_NSIG
);
951 if (sig
< 1 || sig
> TARGET_NSIG
) {
952 return -TARGET_EINVAL
;
955 if (act
&& (sig
== TARGET_SIGKILL
|| sig
== TARGET_SIGSTOP
)) {
956 return -TARGET_EINVAL
;
959 if (block_signals()) {
960 return -QEMU_ERESTARTSYS
;
963 k
= &sigact_table
[sig
- 1];
965 __put_user(k
->_sa_handler
, &oact
->_sa_handler
);
966 __put_user(k
->sa_flags
, &oact
->sa_flags
);
967 #ifdef TARGET_ARCH_HAS_SA_RESTORER
968 __put_user(k
->sa_restorer
, &oact
->sa_restorer
);
971 oact
->sa_mask
= k
->sa_mask
;
974 __get_user(k
->_sa_handler
, &act
->_sa_handler
);
975 __get_user(k
->sa_flags
, &act
->sa_flags
);
976 #ifdef TARGET_ARCH_HAS_SA_RESTORER
977 __get_user(k
->sa_restorer
, &act
->sa_restorer
);
979 #ifdef TARGET_ARCH_HAS_KA_RESTORER
980 k
->ka_restorer
= ka_restorer
;
982 /* To be swapped in target_to_host_sigset. */
983 k
->sa_mask
= act
->sa_mask
;
985 /* we update the host linux signal state */
986 host_sig
= target_to_host_signal(sig
);
987 trace_signal_do_sigaction_host(host_sig
, TARGET_NSIG
);
988 if (host_sig
> SIGRTMAX
) {
989 /* we don't have enough host signals to map all target signals */
990 qemu_log_mask(LOG_UNIMP
, "Unsupported target signal #%d, ignored\n",
993 * we don't return an error here because some programs try to
994 * register an handler for all possible rt signals even if they
996 * An error here can abort them whereas there can be no problem
997 * to not have the signal available later.
998 * This is the case for golang,
999 * See https://github.com/golang/go/issues/33746
1000 * So we silently ignore the error.
1004 if (host_sig
!= SIGSEGV
&& host_sig
!= SIGBUS
) {
1005 sigfillset(&act1
.sa_mask
);
1006 act1
.sa_flags
= SA_SIGINFO
;
1007 if (k
->sa_flags
& TARGET_SA_RESTART
)
1008 act1
.sa_flags
|= SA_RESTART
;
1009 /* NOTE: it is important to update the host kernel signal
1010 ignore state to avoid getting unexpected interrupted
1012 if (k
->_sa_handler
== TARGET_SIG_IGN
) {
1013 act1
.sa_sigaction
= (void *)SIG_IGN
;
1014 } else if (k
->_sa_handler
== TARGET_SIG_DFL
) {
1015 if (fatal_signal (sig
))
1016 act1
.sa_sigaction
= host_signal_handler
;
1018 act1
.sa_sigaction
= (void *)SIG_DFL
;
1020 act1
.sa_sigaction
= host_signal_handler
;
1022 ret
= sigaction(host_sig
, &act1
, NULL
);
1028 static void handle_pending_signal(CPUArchState
*cpu_env
, int sig
,
1029 struct emulated_sigtable
*k
)
1031 CPUState
*cpu
= env_cpu(cpu_env
);
1034 target_sigset_t target_old_set
;
1035 struct target_sigaction
*sa
;
1036 TaskState
*ts
= cpu
->opaque
;
1038 trace_user_handle_signal(cpu_env
, sig
);
1039 /* dequeue signal */
1042 sig
= gdb_handlesig(cpu
, sig
);
1045 handler
= TARGET_SIG_IGN
;
1047 sa
= &sigact_table
[sig
- 1];
1048 handler
= sa
->_sa_handler
;
1051 if (unlikely(qemu_loglevel_mask(LOG_STRACE
))) {
1052 print_taken_signal(sig
, &k
->info
);
1055 if (handler
== TARGET_SIG_DFL
) {
1056 /* default handler : ignore some signal. The other are job control or fatal */
1057 if (sig
== TARGET_SIGTSTP
|| sig
== TARGET_SIGTTIN
|| sig
== TARGET_SIGTTOU
) {
1058 kill(getpid(),SIGSTOP
);
1059 } else if (sig
!= TARGET_SIGCHLD
&&
1060 sig
!= TARGET_SIGURG
&&
1061 sig
!= TARGET_SIGWINCH
&&
1062 sig
!= TARGET_SIGCONT
) {
1063 dump_core_and_abort(cpu_env
, sig
);
1065 } else if (handler
== TARGET_SIG_IGN
) {
1067 } else if (handler
== TARGET_SIG_ERR
) {
1068 dump_core_and_abort(cpu_env
, sig
);
1070 /* compute the blocked signals during the handler execution */
1071 sigset_t
*blocked_set
;
1073 target_to_host_sigset(&set
, &sa
->sa_mask
);
1074 /* SA_NODEFER indicates that the current signal should not be
1075 blocked during the handler */
1076 if (!(sa
->sa_flags
& TARGET_SA_NODEFER
))
1077 sigaddset(&set
, target_to_host_signal(sig
));
1079 /* save the previous blocked signal state to restore it at the
1080 end of the signal execution (see do_sigreturn) */
1081 host_to_target_sigset_internal(&target_old_set
, &ts
->signal_mask
);
1083 /* block signals in the handler */
1084 blocked_set
= ts
->in_sigsuspend
?
1085 &ts
->sigsuspend_mask
: &ts
->signal_mask
;
1086 sigorset(&ts
->signal_mask
, blocked_set
, &set
);
1087 ts
->in_sigsuspend
= 0;
1089 /* if the CPU is in VM86 mode, we restore the 32 bit values */
1090 #if defined(TARGET_I386) && !defined(TARGET_X86_64)
1092 CPUX86State
*env
= cpu_env
;
1093 if (env
->eflags
& VM_MASK
)
1094 save_v86_state(env
);
1097 /* prepare the stack frame of the virtual CPU */
1098 #if defined(TARGET_ARCH_HAS_SETUP_FRAME)
1099 if (sa
->sa_flags
& TARGET_SA_SIGINFO
) {
1100 setup_rt_frame(sig
, sa
, &k
->info
, &target_old_set
, cpu_env
);
1102 setup_frame(sig
, sa
, &target_old_set
, cpu_env
);
1105 /* These targets do not have traditional signals. */
1106 setup_rt_frame(sig
, sa
, &k
->info
, &target_old_set
, cpu_env
);
1108 if (sa
->sa_flags
& TARGET_SA_RESETHAND
) {
1109 sa
->_sa_handler
= TARGET_SIG_DFL
;
1114 void process_pending_signals(CPUArchState
*cpu_env
)
1116 CPUState
*cpu
= env_cpu(cpu_env
);
1118 TaskState
*ts
= cpu
->opaque
;
1120 sigset_t
*blocked_set
;
1122 while (qatomic_read(&ts
->signal_pending
)) {
1124 sigprocmask(SIG_SETMASK
, &set
, 0);
1127 sig
= ts
->sync_signal
.pending
;
1129 /* Synchronous signals are forced,
1130 * see force_sig_info() and callers in Linux
1131 * Note that not all of our queue_signal() calls in QEMU correspond
1132 * to force_sig_info() calls in Linux (some are send_sig_info()).
1133 * However it seems like a kernel bug to me to allow the process
1134 * to block a synchronous signal since it could then just end up
1135 * looping round and round indefinitely.
1137 if (sigismember(&ts
->signal_mask
, target_to_host_signal_table
[sig
])
1138 || sigact_table
[sig
- 1]._sa_handler
== TARGET_SIG_IGN
) {
1139 sigdelset(&ts
->signal_mask
, target_to_host_signal_table
[sig
]);
1140 sigact_table
[sig
- 1]._sa_handler
= TARGET_SIG_DFL
;
1143 handle_pending_signal(cpu_env
, sig
, &ts
->sync_signal
);
1146 for (sig
= 1; sig
<= TARGET_NSIG
; sig
++) {
1147 blocked_set
= ts
->in_sigsuspend
?
1148 &ts
->sigsuspend_mask
: &ts
->signal_mask
;
1150 if (ts
->sigtab
[sig
- 1].pending
&&
1151 (!sigismember(blocked_set
,
1152 target_to_host_signal_table
[sig
]))) {
1153 handle_pending_signal(cpu_env
, sig
, &ts
->sigtab
[sig
- 1]);
1154 /* Restart scan from the beginning, as handle_pending_signal
1155 * might have resulted in a new synchronous signal (eg SIGSEGV).
1161 /* if no signal is pending, unblock signals and recheck (the act
1162 * of unblocking might cause us to take another host signal which
1163 * will set signal_pending again).
1165 qatomic_set(&ts
->signal_pending
, 0);
1166 ts
->in_sigsuspend
= 0;
1167 set
= ts
->signal_mask
;
1168 sigdelset(&set
, SIGSEGV
);
1169 sigdelset(&set
, SIGBUS
);
1170 sigprocmask(SIG_SETMASK
, &set
, 0);
1172 ts
->in_sigsuspend
= 0;
1175 int process_sigsuspend_mask(sigset_t
**pset
, target_ulong sigset
,
1176 target_ulong sigsize
)
1178 TaskState
*ts
= (TaskState
*)thread_cpu
->opaque
;
1179 sigset_t
*host_set
= &ts
->sigsuspend_mask
;
1180 target_sigset_t
*target_sigset
;
1182 if (sigsize
!= sizeof(*target_sigset
)) {
1183 /* Like the kernel, we enforce correct size sigsets */
1184 return -TARGET_EINVAL
;
1187 target_sigset
= lock_user(VERIFY_READ
, sigset
, sigsize
, 1);
1188 if (!target_sigset
) {
1189 return -TARGET_EFAULT
;
1191 target_to_host_sigset(host_set
, target_sigset
);
1192 unlock_user(target_sigset
, sigset
, 0);