mirror: Check job_is_cancelled() earlier
[qemu/armbru.git] / block / qcow2-cluster.c
blob5727f92dcb390df9665006e45940873424b22af4
1 /*
2 * Block driver for the QCOW version 2 format
4 * Copyright (c) 2004-2006 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "qemu/osdep.h"
26 #include <zlib.h>
28 #include "qapi/error.h"
29 #include "qcow2.h"
30 #include "qemu/bswap.h"
31 #include "trace.h"
33 int qcow2_shrink_l1_table(BlockDriverState *bs, uint64_t exact_size)
35 BDRVQcow2State *s = bs->opaque;
36 int new_l1_size, i, ret;
38 if (exact_size >= s->l1_size) {
39 return 0;
42 new_l1_size = exact_size;
44 #ifdef DEBUG_ALLOC2
45 fprintf(stderr, "shrink l1_table from %d to %d\n", s->l1_size, new_l1_size);
46 #endif
48 BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_WRITE_TABLE);
49 ret = bdrv_pwrite_zeroes(bs->file, s->l1_table_offset +
50 new_l1_size * L1E_SIZE,
51 (s->l1_size - new_l1_size) * L1E_SIZE, 0);
52 if (ret < 0) {
53 goto fail;
56 ret = bdrv_flush(bs->file->bs);
57 if (ret < 0) {
58 goto fail;
61 BLKDBG_EVENT(bs->file, BLKDBG_L1_SHRINK_FREE_L2_CLUSTERS);
62 for (i = s->l1_size - 1; i > new_l1_size - 1; i--) {
63 if ((s->l1_table[i] & L1E_OFFSET_MASK) == 0) {
64 continue;
66 qcow2_free_clusters(bs, s->l1_table[i] & L1E_OFFSET_MASK,
67 s->cluster_size, QCOW2_DISCARD_ALWAYS);
68 s->l1_table[i] = 0;
70 return 0;
72 fail:
74 * If the write in the l1_table failed the image may contain a partially
75 * overwritten l1_table. In this case it would be better to clear the
76 * l1_table in memory to avoid possible image corruption.
78 memset(s->l1_table + new_l1_size, 0,
79 (s->l1_size - new_l1_size) * L1E_SIZE);
80 return ret;
83 int qcow2_grow_l1_table(BlockDriverState *bs, uint64_t min_size,
84 bool exact_size)
86 BDRVQcow2State *s = bs->opaque;
87 int new_l1_size2, ret, i;
88 uint64_t *new_l1_table;
89 int64_t old_l1_table_offset, old_l1_size;
90 int64_t new_l1_table_offset, new_l1_size;
91 uint8_t data[12];
93 if (min_size <= s->l1_size)
94 return 0;
96 /* Do a sanity check on min_size before trying to calculate new_l1_size
97 * (this prevents overflows during the while loop for the calculation of
98 * new_l1_size) */
99 if (min_size > INT_MAX / L1E_SIZE) {
100 return -EFBIG;
103 if (exact_size) {
104 new_l1_size = min_size;
105 } else {
106 /* Bump size up to reduce the number of times we have to grow */
107 new_l1_size = s->l1_size;
108 if (new_l1_size == 0) {
109 new_l1_size = 1;
111 while (min_size > new_l1_size) {
112 new_l1_size = DIV_ROUND_UP(new_l1_size * 3, 2);
116 QEMU_BUILD_BUG_ON(QCOW_MAX_L1_SIZE > INT_MAX);
117 if (new_l1_size > QCOW_MAX_L1_SIZE / L1E_SIZE) {
118 return -EFBIG;
121 #ifdef DEBUG_ALLOC2
122 fprintf(stderr, "grow l1_table from %d to %" PRId64 "\n",
123 s->l1_size, new_l1_size);
124 #endif
126 new_l1_size2 = L1E_SIZE * new_l1_size;
127 new_l1_table = qemu_try_blockalign(bs->file->bs, new_l1_size2);
128 if (new_l1_table == NULL) {
129 return -ENOMEM;
131 memset(new_l1_table, 0, new_l1_size2);
133 if (s->l1_size) {
134 memcpy(new_l1_table, s->l1_table, s->l1_size * L1E_SIZE);
137 /* write new table (align to cluster) */
138 BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ALLOC_TABLE);
139 new_l1_table_offset = qcow2_alloc_clusters(bs, new_l1_size2);
140 if (new_l1_table_offset < 0) {
141 qemu_vfree(new_l1_table);
142 return new_l1_table_offset;
145 ret = qcow2_cache_flush(bs, s->refcount_block_cache);
146 if (ret < 0) {
147 goto fail;
150 /* the L1 position has not yet been updated, so these clusters must
151 * indeed be completely free */
152 ret = qcow2_pre_write_overlap_check(bs, 0, new_l1_table_offset,
153 new_l1_size2, false);
154 if (ret < 0) {
155 goto fail;
158 BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_WRITE_TABLE);
159 for(i = 0; i < s->l1_size; i++)
160 new_l1_table[i] = cpu_to_be64(new_l1_table[i]);
161 ret = bdrv_pwrite_sync(bs->file, new_l1_table_offset,
162 new_l1_table, new_l1_size2);
163 if (ret < 0)
164 goto fail;
165 for(i = 0; i < s->l1_size; i++)
166 new_l1_table[i] = be64_to_cpu(new_l1_table[i]);
168 /* set new table */
169 BLKDBG_EVENT(bs->file, BLKDBG_L1_GROW_ACTIVATE_TABLE);
170 stl_be_p(data, new_l1_size);
171 stq_be_p(data + 4, new_l1_table_offset);
172 ret = bdrv_pwrite_sync(bs->file, offsetof(QCowHeader, l1_size),
173 data, sizeof(data));
174 if (ret < 0) {
175 goto fail;
177 qemu_vfree(s->l1_table);
178 old_l1_table_offset = s->l1_table_offset;
179 s->l1_table_offset = new_l1_table_offset;
180 s->l1_table = new_l1_table;
181 old_l1_size = s->l1_size;
182 s->l1_size = new_l1_size;
183 qcow2_free_clusters(bs, old_l1_table_offset, old_l1_size * L1E_SIZE,
184 QCOW2_DISCARD_OTHER);
185 return 0;
186 fail:
187 qemu_vfree(new_l1_table);
188 qcow2_free_clusters(bs, new_l1_table_offset, new_l1_size2,
189 QCOW2_DISCARD_OTHER);
190 return ret;
194 * l2_load
196 * @bs: The BlockDriverState
197 * @offset: A guest offset, used to calculate what slice of the L2
198 * table to load.
199 * @l2_offset: Offset to the L2 table in the image file.
200 * @l2_slice: Location to store the pointer to the L2 slice.
202 * Loads a L2 slice into memory (L2 slices are the parts of L2 tables
203 * that are loaded by the qcow2 cache). If the slice is in the cache,
204 * the cache is used; otherwise the L2 slice is loaded from the image
205 * file.
207 static int l2_load(BlockDriverState *bs, uint64_t offset,
208 uint64_t l2_offset, uint64_t **l2_slice)
210 BDRVQcow2State *s = bs->opaque;
211 int start_of_slice = l2_entry_size(s) *
212 (offset_to_l2_index(s, offset) - offset_to_l2_slice_index(s, offset));
214 return qcow2_cache_get(bs, s->l2_table_cache, l2_offset + start_of_slice,
215 (void **)l2_slice);
219 * Writes an L1 entry to disk (note that depending on the alignment
220 * requirements this function may write more that just one entry in
221 * order to prevent bdrv_pwrite from performing a read-modify-write)
223 int qcow2_write_l1_entry(BlockDriverState *bs, int l1_index)
225 BDRVQcow2State *s = bs->opaque;
226 int l1_start_index;
227 int i, ret;
228 int bufsize = MAX(L1E_SIZE,
229 MIN(bs->file->bs->bl.request_alignment, s->cluster_size));
230 int nentries = bufsize / L1E_SIZE;
231 g_autofree uint64_t *buf = g_try_new0(uint64_t, nentries);
233 if (buf == NULL) {
234 return -ENOMEM;
237 l1_start_index = QEMU_ALIGN_DOWN(l1_index, nentries);
238 for (i = 0; i < MIN(nentries, s->l1_size - l1_start_index); i++) {
239 buf[i] = cpu_to_be64(s->l1_table[l1_start_index + i]);
242 ret = qcow2_pre_write_overlap_check(bs, QCOW2_OL_ACTIVE_L1,
243 s->l1_table_offset + L1E_SIZE * l1_start_index, bufsize, false);
244 if (ret < 0) {
245 return ret;
248 BLKDBG_EVENT(bs->file, BLKDBG_L1_UPDATE);
249 ret = bdrv_pwrite_sync(bs->file,
250 s->l1_table_offset + L1E_SIZE * l1_start_index,
251 buf, bufsize);
252 if (ret < 0) {
253 return ret;
256 return 0;
260 * l2_allocate
262 * Allocate a new l2 entry in the file. If l1_index points to an already
263 * used entry in the L2 table (i.e. we are doing a copy on write for the L2
264 * table) copy the contents of the old L2 table into the newly allocated one.
265 * Otherwise the new table is initialized with zeros.
269 static int l2_allocate(BlockDriverState *bs, int l1_index)
271 BDRVQcow2State *s = bs->opaque;
272 uint64_t old_l2_offset;
273 uint64_t *l2_slice = NULL;
274 unsigned slice, slice_size2, n_slices;
275 int64_t l2_offset;
276 int ret;
278 old_l2_offset = s->l1_table[l1_index];
280 trace_qcow2_l2_allocate(bs, l1_index);
282 /* allocate a new l2 entry */
284 l2_offset = qcow2_alloc_clusters(bs, s->l2_size * l2_entry_size(s));
285 if (l2_offset < 0) {
286 ret = l2_offset;
287 goto fail;
290 /* The offset must fit in the offset field of the L1 table entry */
291 assert((l2_offset & L1E_OFFSET_MASK) == l2_offset);
293 /* If we're allocating the table at offset 0 then something is wrong */
294 if (l2_offset == 0) {
295 qcow2_signal_corruption(bs, true, -1, -1, "Preventing invalid "
296 "allocation of L2 table at offset 0");
297 ret = -EIO;
298 goto fail;
301 ret = qcow2_cache_flush(bs, s->refcount_block_cache);
302 if (ret < 0) {
303 goto fail;
306 /* allocate a new entry in the l2 cache */
308 slice_size2 = s->l2_slice_size * l2_entry_size(s);
309 n_slices = s->cluster_size / slice_size2;
311 trace_qcow2_l2_allocate_get_empty(bs, l1_index);
312 for (slice = 0; slice < n_slices; slice++) {
313 ret = qcow2_cache_get_empty(bs, s->l2_table_cache,
314 l2_offset + slice * slice_size2,
315 (void **) &l2_slice);
316 if (ret < 0) {
317 goto fail;
320 if ((old_l2_offset & L1E_OFFSET_MASK) == 0) {
321 /* if there was no old l2 table, clear the new slice */
322 memset(l2_slice, 0, slice_size2);
323 } else {
324 uint64_t *old_slice;
325 uint64_t old_l2_slice_offset =
326 (old_l2_offset & L1E_OFFSET_MASK) + slice * slice_size2;
328 /* if there was an old l2 table, read a slice from the disk */
329 BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ);
330 ret = qcow2_cache_get(bs, s->l2_table_cache, old_l2_slice_offset,
331 (void **) &old_slice);
332 if (ret < 0) {
333 goto fail;
336 memcpy(l2_slice, old_slice, slice_size2);
338 qcow2_cache_put(s->l2_table_cache, (void **) &old_slice);
341 /* write the l2 slice to the file */
342 BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE);
344 trace_qcow2_l2_allocate_write_l2(bs, l1_index);
345 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
346 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
349 ret = qcow2_cache_flush(bs, s->l2_table_cache);
350 if (ret < 0) {
351 goto fail;
354 /* update the L1 entry */
355 trace_qcow2_l2_allocate_write_l1(bs, l1_index);
356 s->l1_table[l1_index] = l2_offset | QCOW_OFLAG_COPIED;
357 ret = qcow2_write_l1_entry(bs, l1_index);
358 if (ret < 0) {
359 goto fail;
362 trace_qcow2_l2_allocate_done(bs, l1_index, 0);
363 return 0;
365 fail:
366 trace_qcow2_l2_allocate_done(bs, l1_index, ret);
367 if (l2_slice != NULL) {
368 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
370 s->l1_table[l1_index] = old_l2_offset;
371 if (l2_offset > 0) {
372 qcow2_free_clusters(bs, l2_offset, s->l2_size * l2_entry_size(s),
373 QCOW2_DISCARD_ALWAYS);
375 return ret;
379 * For a given L2 entry, count the number of contiguous subclusters of
380 * the same type starting from @sc_from. Compressed clusters are
381 * treated as if they were divided into subclusters of size
382 * s->subcluster_size.
384 * Return the number of contiguous subclusters and set @type to the
385 * subcluster type.
387 * If the L2 entry is invalid return -errno and set @type to
388 * QCOW2_SUBCLUSTER_INVALID.
390 static int qcow2_get_subcluster_range_type(BlockDriverState *bs,
391 uint64_t l2_entry,
392 uint64_t l2_bitmap,
393 unsigned sc_from,
394 QCow2SubclusterType *type)
396 BDRVQcow2State *s = bs->opaque;
397 uint32_t val;
399 *type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_from);
401 if (*type == QCOW2_SUBCLUSTER_INVALID) {
402 return -EINVAL;
403 } else if (!has_subclusters(s) || *type == QCOW2_SUBCLUSTER_COMPRESSED) {
404 return s->subclusters_per_cluster - sc_from;
407 switch (*type) {
408 case QCOW2_SUBCLUSTER_NORMAL:
409 val = l2_bitmap | QCOW_OFLAG_SUB_ALLOC_RANGE(0, sc_from);
410 return cto32(val) - sc_from;
412 case QCOW2_SUBCLUSTER_ZERO_PLAIN:
413 case QCOW2_SUBCLUSTER_ZERO_ALLOC:
414 val = (l2_bitmap | QCOW_OFLAG_SUB_ZERO_RANGE(0, sc_from)) >> 32;
415 return cto32(val) - sc_from;
417 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN:
418 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC:
419 val = ((l2_bitmap >> 32) | l2_bitmap)
420 & ~QCOW_OFLAG_SUB_ALLOC_RANGE(0, sc_from);
421 return ctz32(val) - sc_from;
423 default:
424 g_assert_not_reached();
429 * Return the number of contiguous subclusters of the exact same type
430 * in a given L2 slice, starting from cluster @l2_index, subcluster
431 * @sc_index. Allocated subclusters are required to be contiguous in
432 * the image file.
433 * At most @nb_clusters are checked (note that this means clusters,
434 * not subclusters).
435 * Compressed clusters are always processed one by one but for the
436 * purpose of this count they are treated as if they were divided into
437 * subclusters of size s->subcluster_size.
438 * On failure return -errno and update @l2_index to point to the
439 * invalid entry.
441 static int count_contiguous_subclusters(BlockDriverState *bs, int nb_clusters,
442 unsigned sc_index, uint64_t *l2_slice,
443 unsigned *l2_index)
445 BDRVQcow2State *s = bs->opaque;
446 int i, count = 0;
447 bool check_offset = false;
448 uint64_t expected_offset = 0;
449 QCow2SubclusterType expected_type = QCOW2_SUBCLUSTER_NORMAL, type;
451 assert(*l2_index + nb_clusters <= s->l2_slice_size);
453 for (i = 0; i < nb_clusters; i++) {
454 unsigned first_sc = (i == 0) ? sc_index : 0;
455 uint64_t l2_entry = get_l2_entry(s, l2_slice, *l2_index + i);
456 uint64_t l2_bitmap = get_l2_bitmap(s, l2_slice, *l2_index + i);
457 int ret = qcow2_get_subcluster_range_type(bs, l2_entry, l2_bitmap,
458 first_sc, &type);
459 if (ret < 0) {
460 *l2_index += i; /* Point to the invalid entry */
461 return -EIO;
463 if (i == 0) {
464 if (type == QCOW2_SUBCLUSTER_COMPRESSED) {
465 /* Compressed clusters are always processed one by one */
466 return ret;
468 expected_type = type;
469 expected_offset = l2_entry & L2E_OFFSET_MASK;
470 check_offset = (type == QCOW2_SUBCLUSTER_NORMAL ||
471 type == QCOW2_SUBCLUSTER_ZERO_ALLOC ||
472 type == QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC);
473 } else if (type != expected_type) {
474 break;
475 } else if (check_offset) {
476 expected_offset += s->cluster_size;
477 if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) {
478 break;
481 count += ret;
482 /* Stop if there are type changes before the end of the cluster */
483 if (first_sc + ret < s->subclusters_per_cluster) {
484 break;
488 return count;
491 static int coroutine_fn do_perform_cow_read(BlockDriverState *bs,
492 uint64_t src_cluster_offset,
493 unsigned offset_in_cluster,
494 QEMUIOVector *qiov)
496 int ret;
498 if (qiov->size == 0) {
499 return 0;
502 BLKDBG_EVENT(bs->file, BLKDBG_COW_READ);
504 if (!bs->drv) {
505 return -ENOMEDIUM;
509 * We never deal with requests that don't satisfy
510 * bdrv_check_qiov_request(), and aligning requests to clusters never
511 * breaks this condition. So, do some assertions before calling
512 * bs->drv->bdrv_co_preadv_part() which has int64_t arguments.
514 assert(src_cluster_offset <= INT64_MAX);
515 assert(src_cluster_offset + offset_in_cluster <= INT64_MAX);
516 assert(qiov->size <= INT64_MAX);
517 bdrv_check_qiov_request(src_cluster_offset + offset_in_cluster, qiov->size,
518 qiov, 0, &error_abort);
520 * Call .bdrv_co_readv() directly instead of using the public block-layer
521 * interface. This avoids double I/O throttling and request tracking,
522 * which can lead to deadlock when block layer copy-on-read is enabled.
524 ret = bs->drv->bdrv_co_preadv_part(bs,
525 src_cluster_offset + offset_in_cluster,
526 qiov->size, qiov, 0, 0);
527 if (ret < 0) {
528 return ret;
531 return 0;
534 static int coroutine_fn do_perform_cow_write(BlockDriverState *bs,
535 uint64_t cluster_offset,
536 unsigned offset_in_cluster,
537 QEMUIOVector *qiov)
539 BDRVQcow2State *s = bs->opaque;
540 int ret;
542 if (qiov->size == 0) {
543 return 0;
546 ret = qcow2_pre_write_overlap_check(bs, 0,
547 cluster_offset + offset_in_cluster, qiov->size, true);
548 if (ret < 0) {
549 return ret;
552 BLKDBG_EVENT(bs->file, BLKDBG_COW_WRITE);
553 ret = bdrv_co_pwritev(s->data_file, cluster_offset + offset_in_cluster,
554 qiov->size, qiov, 0);
555 if (ret < 0) {
556 return ret;
559 return 0;
564 * get_host_offset
566 * For a given offset of the virtual disk find the equivalent host
567 * offset in the qcow2 file and store it in *host_offset. Neither
568 * offset needs to be aligned to a cluster boundary.
570 * If the cluster is unallocated then *host_offset will be 0.
571 * If the cluster is compressed then *host_offset will contain the l2 entry.
573 * On entry, *bytes is the maximum number of contiguous bytes starting at
574 * offset that we are interested in.
576 * On exit, *bytes is the number of bytes starting at offset that have the same
577 * subcluster type and (if applicable) are stored contiguously in the image
578 * file. The subcluster type is stored in *subcluster_type.
579 * Compressed clusters are always processed one by one.
581 * Returns 0 on success, -errno in error cases.
583 int qcow2_get_host_offset(BlockDriverState *bs, uint64_t offset,
584 unsigned int *bytes, uint64_t *host_offset,
585 QCow2SubclusterType *subcluster_type)
587 BDRVQcow2State *s = bs->opaque;
588 unsigned int l2_index, sc_index;
589 uint64_t l1_index, l2_offset, *l2_slice, l2_entry, l2_bitmap;
590 int sc;
591 unsigned int offset_in_cluster;
592 uint64_t bytes_available, bytes_needed, nb_clusters;
593 QCow2SubclusterType type;
594 int ret;
596 offset_in_cluster = offset_into_cluster(s, offset);
597 bytes_needed = (uint64_t) *bytes + offset_in_cluster;
599 /* compute how many bytes there are between the start of the cluster
600 * containing offset and the end of the l2 slice that contains
601 * the entry pointing to it */
602 bytes_available =
603 ((uint64_t) (s->l2_slice_size - offset_to_l2_slice_index(s, offset)))
604 << s->cluster_bits;
606 if (bytes_needed > bytes_available) {
607 bytes_needed = bytes_available;
610 *host_offset = 0;
612 /* seek to the l2 offset in the l1 table */
614 l1_index = offset_to_l1_index(s, offset);
615 if (l1_index >= s->l1_size) {
616 type = QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN;
617 goto out;
620 l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK;
621 if (!l2_offset) {
622 type = QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN;
623 goto out;
626 if (offset_into_cluster(s, l2_offset)) {
627 qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64
628 " unaligned (L1 index: %#" PRIx64 ")",
629 l2_offset, l1_index);
630 return -EIO;
633 /* load the l2 slice in memory */
635 ret = l2_load(bs, offset, l2_offset, &l2_slice);
636 if (ret < 0) {
637 return ret;
640 /* find the cluster offset for the given disk offset */
642 l2_index = offset_to_l2_slice_index(s, offset);
643 sc_index = offset_to_sc_index(s, offset);
644 l2_entry = get_l2_entry(s, l2_slice, l2_index);
645 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index);
647 nb_clusters = size_to_clusters(s, bytes_needed);
648 /* bytes_needed <= *bytes + offset_in_cluster, both of which are unsigned
649 * integers; the minimum cluster size is 512, so this assertion is always
650 * true */
651 assert(nb_clusters <= INT_MAX);
653 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index);
654 if (s->qcow_version < 3 && (type == QCOW2_SUBCLUSTER_ZERO_PLAIN ||
655 type == QCOW2_SUBCLUSTER_ZERO_ALLOC)) {
656 qcow2_signal_corruption(bs, true, -1, -1, "Zero cluster entry found"
657 " in pre-v3 image (L2 offset: %#" PRIx64
658 ", L2 index: %#x)", l2_offset, l2_index);
659 ret = -EIO;
660 goto fail;
662 switch (type) {
663 case QCOW2_SUBCLUSTER_INVALID:
664 break; /* This is handled by count_contiguous_subclusters() below */
665 case QCOW2_SUBCLUSTER_COMPRESSED:
666 if (has_data_file(bs)) {
667 qcow2_signal_corruption(bs, true, -1, -1, "Compressed cluster "
668 "entry found in image with external data "
669 "file (L2 offset: %#" PRIx64 ", L2 index: "
670 "%#x)", l2_offset, l2_index);
671 ret = -EIO;
672 goto fail;
674 *host_offset = l2_entry;
675 break;
676 case QCOW2_SUBCLUSTER_ZERO_PLAIN:
677 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN:
678 break;
679 case QCOW2_SUBCLUSTER_ZERO_ALLOC:
680 case QCOW2_SUBCLUSTER_NORMAL:
681 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC: {
682 uint64_t host_cluster_offset = l2_entry & L2E_OFFSET_MASK;
683 *host_offset = host_cluster_offset + offset_in_cluster;
684 if (offset_into_cluster(s, host_cluster_offset)) {
685 qcow2_signal_corruption(bs, true, -1, -1,
686 "Cluster allocation offset %#"
687 PRIx64 " unaligned (L2 offset: %#" PRIx64
688 ", L2 index: %#x)", host_cluster_offset,
689 l2_offset, l2_index);
690 ret = -EIO;
691 goto fail;
693 if (has_data_file(bs) && *host_offset != offset) {
694 qcow2_signal_corruption(bs, true, -1, -1,
695 "External data file host cluster offset %#"
696 PRIx64 " does not match guest cluster "
697 "offset: %#" PRIx64
698 ", L2 index: %#x)", host_cluster_offset,
699 offset - offset_in_cluster, l2_index);
700 ret = -EIO;
701 goto fail;
703 break;
705 default:
706 abort();
709 sc = count_contiguous_subclusters(bs, nb_clusters, sc_index,
710 l2_slice, &l2_index);
711 if (sc < 0) {
712 qcow2_signal_corruption(bs, true, -1, -1, "Invalid cluster entry found "
713 " (L2 offset: %#" PRIx64 ", L2 index: %#x)",
714 l2_offset, l2_index);
715 ret = -EIO;
716 goto fail;
718 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
720 bytes_available = ((int64_t)sc + sc_index) << s->subcluster_bits;
722 out:
723 if (bytes_available > bytes_needed) {
724 bytes_available = bytes_needed;
727 /* bytes_available <= bytes_needed <= *bytes + offset_in_cluster;
728 * subtracting offset_in_cluster will therefore definitely yield something
729 * not exceeding UINT_MAX */
730 assert(bytes_available - offset_in_cluster <= UINT_MAX);
731 *bytes = bytes_available - offset_in_cluster;
733 *subcluster_type = type;
735 return 0;
737 fail:
738 qcow2_cache_put(s->l2_table_cache, (void **)&l2_slice);
739 return ret;
743 * get_cluster_table
745 * for a given disk offset, load (and allocate if needed)
746 * the appropriate slice of its l2 table.
748 * the cluster index in the l2 slice is given to the caller.
750 * Returns 0 on success, -errno in failure case
752 static int get_cluster_table(BlockDriverState *bs, uint64_t offset,
753 uint64_t **new_l2_slice,
754 int *new_l2_index)
756 BDRVQcow2State *s = bs->opaque;
757 unsigned int l2_index;
758 uint64_t l1_index, l2_offset;
759 uint64_t *l2_slice = NULL;
760 int ret;
762 /* seek to the l2 offset in the l1 table */
764 l1_index = offset_to_l1_index(s, offset);
765 if (l1_index >= s->l1_size) {
766 ret = qcow2_grow_l1_table(bs, l1_index + 1, false);
767 if (ret < 0) {
768 return ret;
772 assert(l1_index < s->l1_size);
773 l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK;
774 if (offset_into_cluster(s, l2_offset)) {
775 qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#" PRIx64
776 " unaligned (L1 index: %#" PRIx64 ")",
777 l2_offset, l1_index);
778 return -EIO;
781 if (!(s->l1_table[l1_index] & QCOW_OFLAG_COPIED)) {
782 /* First allocate a new L2 table (and do COW if needed) */
783 ret = l2_allocate(bs, l1_index);
784 if (ret < 0) {
785 return ret;
788 /* Then decrease the refcount of the old table */
789 if (l2_offset) {
790 qcow2_free_clusters(bs, l2_offset, s->l2_size * l2_entry_size(s),
791 QCOW2_DISCARD_OTHER);
794 /* Get the offset of the newly-allocated l2 table */
795 l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK;
796 assert(offset_into_cluster(s, l2_offset) == 0);
799 /* load the l2 slice in memory */
800 ret = l2_load(bs, offset, l2_offset, &l2_slice);
801 if (ret < 0) {
802 return ret;
805 /* find the cluster offset for the given disk offset */
807 l2_index = offset_to_l2_slice_index(s, offset);
809 *new_l2_slice = l2_slice;
810 *new_l2_index = l2_index;
812 return 0;
816 * alloc_compressed_cluster_offset
818 * For a given offset on the virtual disk, allocate a new compressed cluster
819 * and put the host offset of the cluster into *host_offset. If a cluster is
820 * already allocated at the offset, return an error.
822 * Return 0 on success and -errno in error cases
824 int qcow2_alloc_compressed_cluster_offset(BlockDriverState *bs,
825 uint64_t offset,
826 int compressed_size,
827 uint64_t *host_offset)
829 BDRVQcow2State *s = bs->opaque;
830 int l2_index, ret;
831 uint64_t *l2_slice;
832 int64_t cluster_offset;
833 int nb_csectors;
835 if (has_data_file(bs)) {
836 return 0;
839 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index);
840 if (ret < 0) {
841 return ret;
844 /* Compression can't overwrite anything. Fail if the cluster was already
845 * allocated. */
846 cluster_offset = get_l2_entry(s, l2_slice, l2_index);
847 if (cluster_offset & L2E_OFFSET_MASK) {
848 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
849 return -EIO;
852 cluster_offset = qcow2_alloc_bytes(bs, compressed_size);
853 if (cluster_offset < 0) {
854 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
855 return cluster_offset;
858 nb_csectors =
859 (cluster_offset + compressed_size - 1) / QCOW2_COMPRESSED_SECTOR_SIZE -
860 (cluster_offset / QCOW2_COMPRESSED_SECTOR_SIZE);
862 /* The offset and size must fit in their fields of the L2 table entry */
863 assert((cluster_offset & s->cluster_offset_mask) == cluster_offset);
864 assert((nb_csectors & s->csize_mask) == nb_csectors);
866 cluster_offset |= QCOW_OFLAG_COMPRESSED |
867 ((uint64_t)nb_csectors << s->csize_shift);
869 /* update L2 table */
871 /* compressed clusters never have the copied flag */
873 BLKDBG_EVENT(bs->file, BLKDBG_L2_UPDATE_COMPRESSED);
874 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
875 set_l2_entry(s, l2_slice, l2_index, cluster_offset);
876 if (has_subclusters(s)) {
877 set_l2_bitmap(s, l2_slice, l2_index, 0);
879 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
881 *host_offset = cluster_offset & s->cluster_offset_mask;
882 return 0;
885 static int perform_cow(BlockDriverState *bs, QCowL2Meta *m)
887 BDRVQcow2State *s = bs->opaque;
888 Qcow2COWRegion *start = &m->cow_start;
889 Qcow2COWRegion *end = &m->cow_end;
890 unsigned buffer_size;
891 unsigned data_bytes = end->offset - (start->offset + start->nb_bytes);
892 bool merge_reads;
893 uint8_t *start_buffer, *end_buffer;
894 QEMUIOVector qiov;
895 int ret;
897 assert(start->nb_bytes <= UINT_MAX - end->nb_bytes);
898 assert(start->nb_bytes + end->nb_bytes <= UINT_MAX - data_bytes);
899 assert(start->offset + start->nb_bytes <= end->offset);
901 if ((start->nb_bytes == 0 && end->nb_bytes == 0) || m->skip_cow) {
902 return 0;
905 /* If we have to read both the start and end COW regions and the
906 * middle region is not too large then perform just one read
907 * operation */
908 merge_reads = start->nb_bytes && end->nb_bytes && data_bytes <= 16384;
909 if (merge_reads) {
910 buffer_size = start->nb_bytes + data_bytes + end->nb_bytes;
911 } else {
912 /* If we have to do two reads, add some padding in the middle
913 * if necessary to make sure that the end region is optimally
914 * aligned. */
915 size_t align = bdrv_opt_mem_align(bs);
916 assert(align > 0 && align <= UINT_MAX);
917 assert(QEMU_ALIGN_UP(start->nb_bytes, align) <=
918 UINT_MAX - end->nb_bytes);
919 buffer_size = QEMU_ALIGN_UP(start->nb_bytes, align) + end->nb_bytes;
922 /* Reserve a buffer large enough to store all the data that we're
923 * going to read */
924 start_buffer = qemu_try_blockalign(bs, buffer_size);
925 if (start_buffer == NULL) {
926 return -ENOMEM;
928 /* The part of the buffer where the end region is located */
929 end_buffer = start_buffer + buffer_size - end->nb_bytes;
931 qemu_iovec_init(&qiov, 2 + (m->data_qiov ?
932 qemu_iovec_subvec_niov(m->data_qiov,
933 m->data_qiov_offset,
934 data_bytes)
935 : 0));
937 qemu_co_mutex_unlock(&s->lock);
938 /* First we read the existing data from both COW regions. We
939 * either read the whole region in one go, or the start and end
940 * regions separately. */
941 if (merge_reads) {
942 qemu_iovec_add(&qiov, start_buffer, buffer_size);
943 ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov);
944 } else {
945 qemu_iovec_add(&qiov, start_buffer, start->nb_bytes);
946 ret = do_perform_cow_read(bs, m->offset, start->offset, &qiov);
947 if (ret < 0) {
948 goto fail;
951 qemu_iovec_reset(&qiov);
952 qemu_iovec_add(&qiov, end_buffer, end->nb_bytes);
953 ret = do_perform_cow_read(bs, m->offset, end->offset, &qiov);
955 if (ret < 0) {
956 goto fail;
959 /* Encrypt the data if necessary before writing it */
960 if (bs->encrypted) {
961 ret = qcow2_co_encrypt(bs,
962 m->alloc_offset + start->offset,
963 m->offset + start->offset,
964 start_buffer, start->nb_bytes);
965 if (ret < 0) {
966 goto fail;
969 ret = qcow2_co_encrypt(bs,
970 m->alloc_offset + end->offset,
971 m->offset + end->offset,
972 end_buffer, end->nb_bytes);
973 if (ret < 0) {
974 goto fail;
978 /* And now we can write everything. If we have the guest data we
979 * can write everything in one single operation */
980 if (m->data_qiov) {
981 qemu_iovec_reset(&qiov);
982 if (start->nb_bytes) {
983 qemu_iovec_add(&qiov, start_buffer, start->nb_bytes);
985 qemu_iovec_concat(&qiov, m->data_qiov, m->data_qiov_offset, data_bytes);
986 if (end->nb_bytes) {
987 qemu_iovec_add(&qiov, end_buffer, end->nb_bytes);
989 /* NOTE: we have a write_aio blkdebug event here followed by
990 * a cow_write one in do_perform_cow_write(), but there's only
991 * one single I/O operation */
992 BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
993 ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov);
994 } else {
995 /* If there's no guest data then write both COW regions separately */
996 qemu_iovec_reset(&qiov);
997 qemu_iovec_add(&qiov, start_buffer, start->nb_bytes);
998 ret = do_perform_cow_write(bs, m->alloc_offset, start->offset, &qiov);
999 if (ret < 0) {
1000 goto fail;
1003 qemu_iovec_reset(&qiov);
1004 qemu_iovec_add(&qiov, end_buffer, end->nb_bytes);
1005 ret = do_perform_cow_write(bs, m->alloc_offset, end->offset, &qiov);
1008 fail:
1009 qemu_co_mutex_lock(&s->lock);
1012 * Before we update the L2 table to actually point to the new cluster, we
1013 * need to be sure that the refcounts have been increased and COW was
1014 * handled.
1016 if (ret == 0) {
1017 qcow2_cache_depends_on_flush(s->l2_table_cache);
1020 qemu_vfree(start_buffer);
1021 qemu_iovec_destroy(&qiov);
1022 return ret;
1025 int qcow2_alloc_cluster_link_l2(BlockDriverState *bs, QCowL2Meta *m)
1027 BDRVQcow2State *s = bs->opaque;
1028 int i, j = 0, l2_index, ret;
1029 uint64_t *old_cluster, *l2_slice;
1030 uint64_t cluster_offset = m->alloc_offset;
1032 trace_qcow2_cluster_link_l2(qemu_coroutine_self(), m->nb_clusters);
1033 assert(m->nb_clusters > 0);
1035 old_cluster = g_try_new(uint64_t, m->nb_clusters);
1036 if (old_cluster == NULL) {
1037 ret = -ENOMEM;
1038 goto err;
1041 /* copy content of unmodified sectors */
1042 ret = perform_cow(bs, m);
1043 if (ret < 0) {
1044 goto err;
1047 /* Update L2 table. */
1048 if (s->use_lazy_refcounts) {
1049 qcow2_mark_dirty(bs);
1051 if (qcow2_need_accurate_refcounts(s)) {
1052 qcow2_cache_set_dependency(bs, s->l2_table_cache,
1053 s->refcount_block_cache);
1056 ret = get_cluster_table(bs, m->offset, &l2_slice, &l2_index);
1057 if (ret < 0) {
1058 goto err;
1060 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
1062 assert(l2_index + m->nb_clusters <= s->l2_slice_size);
1063 assert(m->cow_end.offset + m->cow_end.nb_bytes <=
1064 m->nb_clusters << s->cluster_bits);
1065 for (i = 0; i < m->nb_clusters; i++) {
1066 uint64_t offset = cluster_offset + ((uint64_t)i << s->cluster_bits);
1067 /* if two concurrent writes happen to the same unallocated cluster
1068 * each write allocates separate cluster and writes data concurrently.
1069 * The first one to complete updates l2 table with pointer to its
1070 * cluster the second one has to do RMW (which is done above by
1071 * perform_cow()), update l2 table with its cluster pointer and free
1072 * old cluster. This is what this loop does */
1073 if (get_l2_entry(s, l2_slice, l2_index + i) != 0) {
1074 old_cluster[j++] = get_l2_entry(s, l2_slice, l2_index + i);
1077 /* The offset must fit in the offset field of the L2 table entry */
1078 assert((offset & L2E_OFFSET_MASK) == offset);
1080 set_l2_entry(s, l2_slice, l2_index + i, offset | QCOW_OFLAG_COPIED);
1082 /* Update bitmap with the subclusters that were just written */
1083 if (has_subclusters(s) && !m->prealloc) {
1084 uint64_t l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i);
1085 unsigned written_from = m->cow_start.offset;
1086 unsigned written_to = m->cow_end.offset + m->cow_end.nb_bytes;
1087 int first_sc, last_sc;
1088 /* Narrow written_from and written_to down to the current cluster */
1089 written_from = MAX(written_from, i << s->cluster_bits);
1090 written_to = MIN(written_to, (i + 1) << s->cluster_bits);
1091 assert(written_from < written_to);
1092 first_sc = offset_to_sc_index(s, written_from);
1093 last_sc = offset_to_sc_index(s, written_to - 1);
1094 l2_bitmap |= QCOW_OFLAG_SUB_ALLOC_RANGE(first_sc, last_sc + 1);
1095 l2_bitmap &= ~QCOW_OFLAG_SUB_ZERO_RANGE(first_sc, last_sc + 1);
1096 set_l2_bitmap(s, l2_slice, l2_index + i, l2_bitmap);
1101 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
1104 * If this was a COW, we need to decrease the refcount of the old cluster.
1106 * Don't discard clusters that reach a refcount of 0 (e.g. compressed
1107 * clusters), the next write will reuse them anyway.
1109 if (!m->keep_old_clusters && j != 0) {
1110 for (i = 0; i < j; i++) {
1111 qcow2_free_any_cluster(bs, old_cluster[i], QCOW2_DISCARD_NEVER);
1115 ret = 0;
1116 err:
1117 g_free(old_cluster);
1118 return ret;
1122 * Frees the allocated clusters because the request failed and they won't
1123 * actually be linked.
1125 void qcow2_alloc_cluster_abort(BlockDriverState *bs, QCowL2Meta *m)
1127 BDRVQcow2State *s = bs->opaque;
1128 if (!has_data_file(bs) && !m->keep_old_clusters) {
1129 qcow2_free_clusters(bs, m->alloc_offset,
1130 m->nb_clusters << s->cluster_bits,
1131 QCOW2_DISCARD_NEVER);
1136 * For a given write request, create a new QCowL2Meta structure, add
1137 * it to @m and the BDRVQcow2State.cluster_allocs list. If the write
1138 * request does not need copy-on-write or changes to the L2 metadata
1139 * then this function does nothing.
1141 * @host_cluster_offset points to the beginning of the first cluster.
1143 * @guest_offset and @bytes indicate the offset and length of the
1144 * request.
1146 * @l2_slice contains the L2 entries of all clusters involved in this
1147 * write request.
1149 * If @keep_old is true it means that the clusters were already
1150 * allocated and will be overwritten. If false then the clusters are
1151 * new and we have to decrease the reference count of the old ones.
1153 * Returns 0 on success, -errno on failure.
1155 static int calculate_l2_meta(BlockDriverState *bs, uint64_t host_cluster_offset,
1156 uint64_t guest_offset, unsigned bytes,
1157 uint64_t *l2_slice, QCowL2Meta **m, bool keep_old)
1159 BDRVQcow2State *s = bs->opaque;
1160 int sc_index, l2_index = offset_to_l2_slice_index(s, guest_offset);
1161 uint64_t l2_entry, l2_bitmap;
1162 unsigned cow_start_from, cow_end_to;
1163 unsigned cow_start_to = offset_into_cluster(s, guest_offset);
1164 unsigned cow_end_from = cow_start_to + bytes;
1165 unsigned nb_clusters = size_to_clusters(s, cow_end_from);
1166 QCowL2Meta *old_m = *m;
1167 QCow2SubclusterType type;
1168 int i;
1169 bool skip_cow = keep_old;
1171 assert(nb_clusters <= s->l2_slice_size - l2_index);
1173 /* Check the type of all affected subclusters */
1174 for (i = 0; i < nb_clusters; i++) {
1175 l2_entry = get_l2_entry(s, l2_slice, l2_index + i);
1176 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i);
1177 if (skip_cow) {
1178 unsigned write_from = MAX(cow_start_to, i << s->cluster_bits);
1179 unsigned write_to = MIN(cow_end_from, (i + 1) << s->cluster_bits);
1180 int first_sc = offset_to_sc_index(s, write_from);
1181 int last_sc = offset_to_sc_index(s, write_to - 1);
1182 int cnt = qcow2_get_subcluster_range_type(bs, l2_entry, l2_bitmap,
1183 first_sc, &type);
1184 /* Is any of the subclusters of type != QCOW2_SUBCLUSTER_NORMAL ? */
1185 if (type != QCOW2_SUBCLUSTER_NORMAL || first_sc + cnt <= last_sc) {
1186 skip_cow = false;
1188 } else {
1189 /* If we can't skip the cow we can still look for invalid entries */
1190 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, 0);
1192 if (type == QCOW2_SUBCLUSTER_INVALID) {
1193 int l1_index = offset_to_l1_index(s, guest_offset);
1194 uint64_t l2_offset = s->l1_table[l1_index] & L1E_OFFSET_MASK;
1195 qcow2_signal_corruption(bs, true, -1, -1, "Invalid cluster "
1196 "entry found (L2 offset: %#" PRIx64
1197 ", L2 index: %#x)",
1198 l2_offset, l2_index + i);
1199 return -EIO;
1203 if (skip_cow) {
1204 return 0;
1207 /* Get the L2 entry of the first cluster */
1208 l2_entry = get_l2_entry(s, l2_slice, l2_index);
1209 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index);
1210 sc_index = offset_to_sc_index(s, guest_offset);
1211 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index);
1213 if (!keep_old) {
1214 switch (type) {
1215 case QCOW2_SUBCLUSTER_COMPRESSED:
1216 cow_start_from = 0;
1217 break;
1218 case QCOW2_SUBCLUSTER_NORMAL:
1219 case QCOW2_SUBCLUSTER_ZERO_ALLOC:
1220 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC:
1221 if (has_subclusters(s)) {
1222 /* Skip all leading zero and unallocated subclusters */
1223 uint32_t alloc_bitmap = l2_bitmap & QCOW_L2_BITMAP_ALL_ALLOC;
1224 cow_start_from =
1225 MIN(sc_index, ctz32(alloc_bitmap)) << s->subcluster_bits;
1226 } else {
1227 cow_start_from = 0;
1229 break;
1230 case QCOW2_SUBCLUSTER_ZERO_PLAIN:
1231 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN:
1232 cow_start_from = sc_index << s->subcluster_bits;
1233 break;
1234 default:
1235 g_assert_not_reached();
1237 } else {
1238 switch (type) {
1239 case QCOW2_SUBCLUSTER_NORMAL:
1240 cow_start_from = cow_start_to;
1241 break;
1242 case QCOW2_SUBCLUSTER_ZERO_ALLOC:
1243 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC:
1244 cow_start_from = sc_index << s->subcluster_bits;
1245 break;
1246 default:
1247 g_assert_not_reached();
1251 /* Get the L2 entry of the last cluster */
1252 l2_index += nb_clusters - 1;
1253 l2_entry = get_l2_entry(s, l2_slice, l2_index);
1254 l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index);
1255 sc_index = offset_to_sc_index(s, guest_offset + bytes - 1);
1256 type = qcow2_get_subcluster_type(bs, l2_entry, l2_bitmap, sc_index);
1258 if (!keep_old) {
1259 switch (type) {
1260 case QCOW2_SUBCLUSTER_COMPRESSED:
1261 cow_end_to = ROUND_UP(cow_end_from, s->cluster_size);
1262 break;
1263 case QCOW2_SUBCLUSTER_NORMAL:
1264 case QCOW2_SUBCLUSTER_ZERO_ALLOC:
1265 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC:
1266 cow_end_to = ROUND_UP(cow_end_from, s->cluster_size);
1267 if (has_subclusters(s)) {
1268 /* Skip all trailing zero and unallocated subclusters */
1269 uint32_t alloc_bitmap = l2_bitmap & QCOW_L2_BITMAP_ALL_ALLOC;
1270 cow_end_to -=
1271 MIN(s->subclusters_per_cluster - sc_index - 1,
1272 clz32(alloc_bitmap)) << s->subcluster_bits;
1274 break;
1275 case QCOW2_SUBCLUSTER_ZERO_PLAIN:
1276 case QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN:
1277 cow_end_to = ROUND_UP(cow_end_from, s->subcluster_size);
1278 break;
1279 default:
1280 g_assert_not_reached();
1282 } else {
1283 switch (type) {
1284 case QCOW2_SUBCLUSTER_NORMAL:
1285 cow_end_to = cow_end_from;
1286 break;
1287 case QCOW2_SUBCLUSTER_ZERO_ALLOC:
1288 case QCOW2_SUBCLUSTER_UNALLOCATED_ALLOC:
1289 cow_end_to = ROUND_UP(cow_end_from, s->subcluster_size);
1290 break;
1291 default:
1292 g_assert_not_reached();
1296 *m = g_malloc0(sizeof(**m));
1297 **m = (QCowL2Meta) {
1298 .next = old_m,
1300 .alloc_offset = host_cluster_offset,
1301 .offset = start_of_cluster(s, guest_offset),
1302 .nb_clusters = nb_clusters,
1304 .keep_old_clusters = keep_old,
1306 .cow_start = {
1307 .offset = cow_start_from,
1308 .nb_bytes = cow_start_to - cow_start_from,
1310 .cow_end = {
1311 .offset = cow_end_from,
1312 .nb_bytes = cow_end_to - cow_end_from,
1316 qemu_co_queue_init(&(*m)->dependent_requests);
1317 QLIST_INSERT_HEAD(&s->cluster_allocs, *m, next_in_flight);
1319 return 0;
1323 * Returns true if writing to the cluster pointed to by @l2_entry
1324 * requires a new allocation (that is, if the cluster is unallocated
1325 * or has refcount > 1 and therefore cannot be written in-place).
1327 static bool cluster_needs_new_alloc(BlockDriverState *bs, uint64_t l2_entry)
1329 switch (qcow2_get_cluster_type(bs, l2_entry)) {
1330 case QCOW2_CLUSTER_NORMAL:
1331 case QCOW2_CLUSTER_ZERO_ALLOC:
1332 if (l2_entry & QCOW_OFLAG_COPIED) {
1333 return false;
1335 /* fallthrough */
1336 case QCOW2_CLUSTER_UNALLOCATED:
1337 case QCOW2_CLUSTER_COMPRESSED:
1338 case QCOW2_CLUSTER_ZERO_PLAIN:
1339 return true;
1340 default:
1341 abort();
1346 * Returns the number of contiguous clusters that can be written to
1347 * using one single write request, starting from @l2_index.
1348 * At most @nb_clusters are checked.
1350 * If @new_alloc is true this counts clusters that are either
1351 * unallocated, or allocated but with refcount > 1 (so they need to be
1352 * newly allocated and COWed).
1354 * If @new_alloc is false this counts clusters that are already
1355 * allocated and can be overwritten in-place (this includes clusters
1356 * of type QCOW2_CLUSTER_ZERO_ALLOC).
1358 static int count_single_write_clusters(BlockDriverState *bs, int nb_clusters,
1359 uint64_t *l2_slice, int l2_index,
1360 bool new_alloc)
1362 BDRVQcow2State *s = bs->opaque;
1363 uint64_t l2_entry = get_l2_entry(s, l2_slice, l2_index);
1364 uint64_t expected_offset = l2_entry & L2E_OFFSET_MASK;
1365 int i;
1367 for (i = 0; i < nb_clusters; i++) {
1368 l2_entry = get_l2_entry(s, l2_slice, l2_index + i);
1369 if (cluster_needs_new_alloc(bs, l2_entry) != new_alloc) {
1370 break;
1372 if (!new_alloc) {
1373 if (expected_offset != (l2_entry & L2E_OFFSET_MASK)) {
1374 break;
1376 expected_offset += s->cluster_size;
1380 assert(i <= nb_clusters);
1381 return i;
1385 * Check if there already is an AIO write request in flight which allocates
1386 * the same cluster. In this case we need to wait until the previous
1387 * request has completed and updated the L2 table accordingly.
1389 * Returns:
1390 * 0 if there was no dependency. *cur_bytes indicates the number of
1391 * bytes from guest_offset that can be read before the next
1392 * dependency must be processed (or the request is complete)
1394 * -EAGAIN if we had to wait for another request, previously gathered
1395 * information on cluster allocation may be invalid now. The caller
1396 * must start over anyway, so consider *cur_bytes undefined.
1398 static int handle_dependencies(BlockDriverState *bs, uint64_t guest_offset,
1399 uint64_t *cur_bytes, QCowL2Meta **m)
1401 BDRVQcow2State *s = bs->opaque;
1402 QCowL2Meta *old_alloc;
1403 uint64_t bytes = *cur_bytes;
1405 QLIST_FOREACH(old_alloc, &s->cluster_allocs, next_in_flight) {
1407 uint64_t start = guest_offset;
1408 uint64_t end = start + bytes;
1409 uint64_t old_start = start_of_cluster(s, l2meta_cow_start(old_alloc));
1410 uint64_t old_end = ROUND_UP(l2meta_cow_end(old_alloc), s->cluster_size);
1412 if (end <= old_start || start >= old_end) {
1413 /* No intersection */
1414 continue;
1417 if (old_alloc->keep_old_clusters &&
1418 (end <= l2meta_cow_start(old_alloc) ||
1419 start >= l2meta_cow_end(old_alloc)))
1422 * Clusters intersect but COW areas don't. And cluster itself is
1423 * already allocated. So, there is no actual conflict.
1425 continue;
1428 /* Conflict */
1430 if (start < old_start) {
1431 /* Stop at the start of a running allocation */
1432 bytes = old_start - start;
1433 } else {
1434 bytes = 0;
1438 * Stop if an l2meta already exists. After yielding, it wouldn't
1439 * be valid any more, so we'd have to clean up the old L2Metas
1440 * and deal with requests depending on them before starting to
1441 * gather new ones. Not worth the trouble.
1443 if (bytes == 0 && *m) {
1444 *cur_bytes = 0;
1445 return 0;
1448 if (bytes == 0) {
1450 * Wait for the dependency to complete. We need to recheck
1451 * the free/allocated clusters when we continue.
1453 qemu_co_queue_wait(&old_alloc->dependent_requests, &s->lock);
1454 return -EAGAIN;
1458 /* Make sure that existing clusters and new allocations are only used up to
1459 * the next dependency if we shortened the request above */
1460 *cur_bytes = bytes;
1462 return 0;
1466 * Checks how many already allocated clusters that don't require a new
1467 * allocation there are at the given guest_offset (up to *bytes).
1468 * If *host_offset is not INV_OFFSET, only physically contiguous clusters
1469 * beginning at this host offset are counted.
1471 * Note that guest_offset may not be cluster aligned. In this case, the
1472 * returned *host_offset points to exact byte referenced by guest_offset and
1473 * therefore isn't cluster aligned as well.
1475 * Returns:
1476 * 0: if no allocated clusters are available at the given offset.
1477 * *bytes is normally unchanged. It is set to 0 if the cluster
1478 * is allocated and can be overwritten in-place but doesn't have
1479 * the right physical offset.
1481 * 1: if allocated clusters that can be overwritten in place are
1482 * available at the requested offset. *bytes may have decreased
1483 * and describes the length of the area that can be written to.
1485 * -errno: in error cases
1487 static int handle_copied(BlockDriverState *bs, uint64_t guest_offset,
1488 uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m)
1490 BDRVQcow2State *s = bs->opaque;
1491 int l2_index;
1492 uint64_t l2_entry, cluster_offset;
1493 uint64_t *l2_slice;
1494 uint64_t nb_clusters;
1495 unsigned int keep_clusters;
1496 int ret;
1498 trace_qcow2_handle_copied(qemu_coroutine_self(), guest_offset, *host_offset,
1499 *bytes);
1501 assert(*host_offset == INV_OFFSET || offset_into_cluster(s, guest_offset)
1502 == offset_into_cluster(s, *host_offset));
1505 * Calculate the number of clusters to look for. We stop at L2 slice
1506 * boundaries to keep things simple.
1508 nb_clusters =
1509 size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes);
1511 l2_index = offset_to_l2_slice_index(s, guest_offset);
1512 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index);
1513 /* Limit total byte count to BDRV_REQUEST_MAX_BYTES */
1514 nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits);
1516 /* Find L2 entry for the first involved cluster */
1517 ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index);
1518 if (ret < 0) {
1519 return ret;
1522 l2_entry = get_l2_entry(s, l2_slice, l2_index);
1523 cluster_offset = l2_entry & L2E_OFFSET_MASK;
1525 if (!cluster_needs_new_alloc(bs, l2_entry)) {
1526 if (offset_into_cluster(s, cluster_offset)) {
1527 qcow2_signal_corruption(bs, true, -1, -1, "%s cluster offset "
1528 "%#" PRIx64 " unaligned (guest offset: %#"
1529 PRIx64 ")", l2_entry & QCOW_OFLAG_ZERO ?
1530 "Preallocated zero" : "Data",
1531 cluster_offset, guest_offset);
1532 ret = -EIO;
1533 goto out;
1536 /* If a specific host_offset is required, check it */
1537 if (*host_offset != INV_OFFSET && cluster_offset != *host_offset) {
1538 *bytes = 0;
1539 ret = 0;
1540 goto out;
1543 /* We keep all QCOW_OFLAG_COPIED clusters */
1544 keep_clusters = count_single_write_clusters(bs, nb_clusters, l2_slice,
1545 l2_index, false);
1546 assert(keep_clusters <= nb_clusters);
1548 *bytes = MIN(*bytes,
1549 keep_clusters * s->cluster_size
1550 - offset_into_cluster(s, guest_offset));
1551 assert(*bytes != 0);
1553 ret = calculate_l2_meta(bs, cluster_offset, guest_offset,
1554 *bytes, l2_slice, m, true);
1555 if (ret < 0) {
1556 goto out;
1559 ret = 1;
1560 } else {
1561 ret = 0;
1564 /* Cleanup */
1565 out:
1566 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
1568 /* Only return a host offset if we actually made progress. Otherwise we
1569 * would make requirements for handle_alloc() that it can't fulfill */
1570 if (ret > 0) {
1571 *host_offset = cluster_offset + offset_into_cluster(s, guest_offset);
1574 return ret;
1578 * Allocates new clusters for the given guest_offset.
1580 * At most *nb_clusters are allocated, and on return *nb_clusters is updated to
1581 * contain the number of clusters that have been allocated and are contiguous
1582 * in the image file.
1584 * If *host_offset is not INV_OFFSET, it specifies the offset in the image file
1585 * at which the new clusters must start. *nb_clusters can be 0 on return in
1586 * this case if the cluster at host_offset is already in use. If *host_offset
1587 * is INV_OFFSET, the clusters can be allocated anywhere in the image file.
1589 * *host_offset is updated to contain the offset into the image file at which
1590 * the first allocated cluster starts.
1592 * Return 0 on success and -errno in error cases. -EAGAIN means that the
1593 * function has been waiting for another request and the allocation must be
1594 * restarted, but the whole request should not be failed.
1596 static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
1597 uint64_t *host_offset, uint64_t *nb_clusters)
1599 BDRVQcow2State *s = bs->opaque;
1601 trace_qcow2_do_alloc_clusters_offset(qemu_coroutine_self(), guest_offset,
1602 *host_offset, *nb_clusters);
1604 if (has_data_file(bs)) {
1605 assert(*host_offset == INV_OFFSET ||
1606 *host_offset == start_of_cluster(s, guest_offset));
1607 *host_offset = start_of_cluster(s, guest_offset);
1608 return 0;
1611 /* Allocate new clusters */
1612 trace_qcow2_cluster_alloc_phys(qemu_coroutine_self());
1613 if (*host_offset == INV_OFFSET) {
1614 int64_t cluster_offset =
1615 qcow2_alloc_clusters(bs, *nb_clusters * s->cluster_size);
1616 if (cluster_offset < 0) {
1617 return cluster_offset;
1619 *host_offset = cluster_offset;
1620 return 0;
1621 } else {
1622 int64_t ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters);
1623 if (ret < 0) {
1624 return ret;
1626 *nb_clusters = ret;
1627 return 0;
1632 * Allocates new clusters for an area that is either still unallocated or
1633 * cannot be overwritten in-place. If *host_offset is not INV_OFFSET,
1634 * clusters are only allocated if the new allocation can match the specified
1635 * host offset.
1637 * Note that guest_offset may not be cluster aligned. In this case, the
1638 * returned *host_offset points to exact byte referenced by guest_offset and
1639 * therefore isn't cluster aligned as well.
1641 * Returns:
1642 * 0: if no clusters could be allocated. *bytes is set to 0,
1643 * *host_offset is left unchanged.
1645 * 1: if new clusters were allocated. *bytes may be decreased if the
1646 * new allocation doesn't cover all of the requested area.
1647 * *host_offset is updated to contain the host offset of the first
1648 * newly allocated cluster.
1650 * -errno: in error cases
1652 static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
1653 uint64_t *host_offset, uint64_t *bytes, QCowL2Meta **m)
1655 BDRVQcow2State *s = bs->opaque;
1656 int l2_index;
1657 uint64_t *l2_slice;
1658 uint64_t nb_clusters;
1659 int ret;
1661 uint64_t alloc_cluster_offset;
1663 trace_qcow2_handle_alloc(qemu_coroutine_self(), guest_offset, *host_offset,
1664 *bytes);
1665 assert(*bytes > 0);
1668 * Calculate the number of clusters to look for. We stop at L2 slice
1669 * boundaries to keep things simple.
1671 nb_clusters =
1672 size_to_clusters(s, offset_into_cluster(s, guest_offset) + *bytes);
1674 l2_index = offset_to_l2_slice_index(s, guest_offset);
1675 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index);
1676 /* Limit total allocation byte count to BDRV_REQUEST_MAX_BYTES */
1677 nb_clusters = MIN(nb_clusters, BDRV_REQUEST_MAX_BYTES >> s->cluster_bits);
1679 /* Find L2 entry for the first involved cluster */
1680 ret = get_cluster_table(bs, guest_offset, &l2_slice, &l2_index);
1681 if (ret < 0) {
1682 return ret;
1685 nb_clusters = count_single_write_clusters(bs, nb_clusters,
1686 l2_slice, l2_index, true);
1688 /* This function is only called when there were no non-COW clusters, so if
1689 * we can't find any unallocated or COW clusters either, something is
1690 * wrong with our code. */
1691 assert(nb_clusters > 0);
1693 /* Allocate at a given offset in the image file */
1694 alloc_cluster_offset = *host_offset == INV_OFFSET ? INV_OFFSET :
1695 start_of_cluster(s, *host_offset);
1696 ret = do_alloc_cluster_offset(bs, guest_offset, &alloc_cluster_offset,
1697 &nb_clusters);
1698 if (ret < 0) {
1699 goto out;
1702 /* Can't extend contiguous allocation */
1703 if (nb_clusters == 0) {
1704 *bytes = 0;
1705 ret = 0;
1706 goto out;
1709 assert(alloc_cluster_offset != INV_OFFSET);
1712 * Save info needed for meta data update.
1714 * requested_bytes: Number of bytes from the start of the first
1715 * newly allocated cluster to the end of the (possibly shortened
1716 * before) write request.
1718 * avail_bytes: Number of bytes from the start of the first
1719 * newly allocated to the end of the last newly allocated cluster.
1721 * nb_bytes: The number of bytes from the start of the first
1722 * newly allocated cluster to the end of the area that the write
1723 * request actually writes to (excluding COW at the end)
1725 uint64_t requested_bytes = *bytes + offset_into_cluster(s, guest_offset);
1726 int avail_bytes = nb_clusters << s->cluster_bits;
1727 int nb_bytes = MIN(requested_bytes, avail_bytes);
1729 *host_offset = alloc_cluster_offset + offset_into_cluster(s, guest_offset);
1730 *bytes = MIN(*bytes, nb_bytes - offset_into_cluster(s, guest_offset));
1731 assert(*bytes != 0);
1733 ret = calculate_l2_meta(bs, alloc_cluster_offset, guest_offset, *bytes,
1734 l2_slice, m, false);
1735 if (ret < 0) {
1736 goto out;
1739 ret = 1;
1741 out:
1742 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
1743 return ret;
1747 * For a given area on the virtual disk defined by @offset and @bytes,
1748 * find the corresponding area on the qcow2 image, allocating new
1749 * clusters (or subclusters) if necessary. The result can span a
1750 * combination of allocated and previously unallocated clusters.
1752 * Note that offset may not be cluster aligned. In this case, the returned
1753 * *host_offset points to exact byte referenced by offset and therefore
1754 * isn't cluster aligned as well.
1756 * On return, @host_offset is set to the beginning of the requested
1757 * area. This area is guaranteed to be contiguous on the qcow2 file
1758 * but it can be smaller than initially requested. In this case @bytes
1759 * is updated with the actual size.
1761 * If any clusters or subclusters were allocated then @m contains a
1762 * list with the information of all the affected regions. Note that
1763 * this can happen regardless of whether this function succeeds or
1764 * not. The caller is responsible for updating the L2 metadata of the
1765 * allocated clusters (on success) or freeing them (on failure), and
1766 * for clearing the contents of @m afterwards in both cases.
1768 * If the request conflicts with another write request in flight, the coroutine
1769 * is queued and will be reentered when the dependency has completed.
1771 * Return 0 on success and -errno in error cases
1773 int qcow2_alloc_host_offset(BlockDriverState *bs, uint64_t offset,
1774 unsigned int *bytes, uint64_t *host_offset,
1775 QCowL2Meta **m)
1777 BDRVQcow2State *s = bs->opaque;
1778 uint64_t start, remaining;
1779 uint64_t cluster_offset;
1780 uint64_t cur_bytes;
1781 int ret;
1783 trace_qcow2_alloc_clusters_offset(qemu_coroutine_self(), offset, *bytes);
1785 again:
1786 start = offset;
1787 remaining = *bytes;
1788 cluster_offset = INV_OFFSET;
1789 *host_offset = INV_OFFSET;
1790 cur_bytes = 0;
1791 *m = NULL;
1793 while (true) {
1795 if (*host_offset == INV_OFFSET && cluster_offset != INV_OFFSET) {
1796 *host_offset = cluster_offset;
1799 assert(remaining >= cur_bytes);
1801 start += cur_bytes;
1802 remaining -= cur_bytes;
1804 if (cluster_offset != INV_OFFSET) {
1805 cluster_offset += cur_bytes;
1808 if (remaining == 0) {
1809 break;
1812 cur_bytes = remaining;
1815 * Now start gathering as many contiguous clusters as possible:
1817 * 1. Check for overlaps with in-flight allocations
1819 * a) Overlap not in the first cluster -> shorten this request and
1820 * let the caller handle the rest in its next loop iteration.
1822 * b) Real overlaps of two requests. Yield and restart the search
1823 * for contiguous clusters (the situation could have changed
1824 * while we were sleeping)
1826 * c) TODO: Request starts in the same cluster as the in-flight
1827 * allocation ends. Shorten the COW of the in-fight allocation,
1828 * set cluster_offset to write to the same cluster and set up
1829 * the right synchronisation between the in-flight request and
1830 * the new one.
1832 ret = handle_dependencies(bs, start, &cur_bytes, m);
1833 if (ret == -EAGAIN) {
1834 /* Currently handle_dependencies() doesn't yield if we already had
1835 * an allocation. If it did, we would have to clean up the L2Meta
1836 * structs before starting over. */
1837 assert(*m == NULL);
1838 goto again;
1839 } else if (ret < 0) {
1840 return ret;
1841 } else if (cur_bytes == 0) {
1842 break;
1843 } else {
1844 /* handle_dependencies() may have decreased cur_bytes (shortened
1845 * the allocations below) so that the next dependency is processed
1846 * correctly during the next loop iteration. */
1850 * 2. Count contiguous COPIED clusters.
1852 ret = handle_copied(bs, start, &cluster_offset, &cur_bytes, m);
1853 if (ret < 0) {
1854 return ret;
1855 } else if (ret) {
1856 continue;
1857 } else if (cur_bytes == 0) {
1858 break;
1862 * 3. If the request still hasn't completed, allocate new clusters,
1863 * considering any cluster_offset of steps 1c or 2.
1865 ret = handle_alloc(bs, start, &cluster_offset, &cur_bytes, m);
1866 if (ret < 0) {
1867 return ret;
1868 } else if (ret) {
1869 continue;
1870 } else {
1871 assert(cur_bytes == 0);
1872 break;
1876 *bytes -= remaining;
1877 assert(*bytes > 0);
1878 assert(*host_offset != INV_OFFSET);
1879 assert(offset_into_cluster(s, *host_offset) ==
1880 offset_into_cluster(s, offset));
1882 return 0;
1886 * This discards as many clusters of nb_clusters as possible at once (i.e.
1887 * all clusters in the same L2 slice) and returns the number of discarded
1888 * clusters.
1890 static int discard_in_l2_slice(BlockDriverState *bs, uint64_t offset,
1891 uint64_t nb_clusters,
1892 enum qcow2_discard_type type, bool full_discard)
1894 BDRVQcow2State *s = bs->opaque;
1895 uint64_t *l2_slice;
1896 int l2_index;
1897 int ret;
1898 int i;
1900 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index);
1901 if (ret < 0) {
1902 return ret;
1905 /* Limit nb_clusters to one L2 slice */
1906 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index);
1907 assert(nb_clusters <= INT_MAX);
1909 for (i = 0; i < nb_clusters; i++) {
1910 uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i);
1911 uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i);
1912 uint64_t new_l2_entry = old_l2_entry;
1913 uint64_t new_l2_bitmap = old_l2_bitmap;
1914 QCow2ClusterType cluster_type =
1915 qcow2_get_cluster_type(bs, old_l2_entry);
1918 * If full_discard is true, the cluster should not read back as zeroes,
1919 * but rather fall through to the backing file.
1921 * If full_discard is false, make sure that a discarded area reads back
1922 * as zeroes for v3 images (we cannot do it for v2 without actually
1923 * writing a zero-filled buffer). We can skip the operation if the
1924 * cluster is already marked as zero, or if it's unallocated and we
1925 * don't have a backing file.
1927 * TODO We might want to use bdrv_block_status(bs) here, but we're
1928 * holding s->lock, so that doesn't work today.
1930 if (full_discard) {
1931 new_l2_entry = new_l2_bitmap = 0;
1932 } else if (bs->backing || qcow2_cluster_is_allocated(cluster_type)) {
1933 if (has_subclusters(s)) {
1934 new_l2_entry = 0;
1935 new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES;
1936 } else {
1937 new_l2_entry = s->qcow_version >= 3 ? QCOW_OFLAG_ZERO : 0;
1941 if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) {
1942 continue;
1945 /* First remove L2 entries */
1946 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
1947 set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry);
1948 if (has_subclusters(s)) {
1949 set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap);
1951 /* Then decrease the refcount */
1952 qcow2_free_any_cluster(bs, old_l2_entry, type);
1955 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
1957 return nb_clusters;
1960 int qcow2_cluster_discard(BlockDriverState *bs, uint64_t offset,
1961 uint64_t bytes, enum qcow2_discard_type type,
1962 bool full_discard)
1964 BDRVQcow2State *s = bs->opaque;
1965 uint64_t end_offset = offset + bytes;
1966 uint64_t nb_clusters;
1967 int64_t cleared;
1968 int ret;
1970 /* Caller must pass aligned values, except at image end */
1971 assert(QEMU_IS_ALIGNED(offset, s->cluster_size));
1972 assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) ||
1973 end_offset == bs->total_sectors << BDRV_SECTOR_BITS);
1975 nb_clusters = size_to_clusters(s, bytes);
1977 s->cache_discards = true;
1979 /* Each L2 slice is handled by its own loop iteration */
1980 while (nb_clusters > 0) {
1981 cleared = discard_in_l2_slice(bs, offset, nb_clusters, type,
1982 full_discard);
1983 if (cleared < 0) {
1984 ret = cleared;
1985 goto fail;
1988 nb_clusters -= cleared;
1989 offset += (cleared * s->cluster_size);
1992 ret = 0;
1993 fail:
1994 s->cache_discards = false;
1995 qcow2_process_discards(bs, ret);
1997 return ret;
2001 * This zeroes as many clusters of nb_clusters as possible at once (i.e.
2002 * all clusters in the same L2 slice) and returns the number of zeroed
2003 * clusters.
2005 static int zero_in_l2_slice(BlockDriverState *bs, uint64_t offset,
2006 uint64_t nb_clusters, int flags)
2008 BDRVQcow2State *s = bs->opaque;
2009 uint64_t *l2_slice;
2010 int l2_index;
2011 int ret;
2012 int i;
2014 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index);
2015 if (ret < 0) {
2016 return ret;
2019 /* Limit nb_clusters to one L2 slice */
2020 nb_clusters = MIN(nb_clusters, s->l2_slice_size - l2_index);
2021 assert(nb_clusters <= INT_MAX);
2023 for (i = 0; i < nb_clusters; i++) {
2024 uint64_t old_l2_entry = get_l2_entry(s, l2_slice, l2_index + i);
2025 uint64_t old_l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index + i);
2026 QCow2ClusterType type = qcow2_get_cluster_type(bs, old_l2_entry);
2027 bool unmap = (type == QCOW2_CLUSTER_COMPRESSED) ||
2028 ((flags & BDRV_REQ_MAY_UNMAP) && qcow2_cluster_is_allocated(type));
2029 uint64_t new_l2_entry = unmap ? 0 : old_l2_entry;
2030 uint64_t new_l2_bitmap = old_l2_bitmap;
2032 if (has_subclusters(s)) {
2033 new_l2_bitmap = QCOW_L2_BITMAP_ALL_ZEROES;
2034 } else {
2035 new_l2_entry |= QCOW_OFLAG_ZERO;
2038 if (old_l2_entry == new_l2_entry && old_l2_bitmap == new_l2_bitmap) {
2039 continue;
2042 /* First update L2 entries */
2043 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2044 set_l2_entry(s, l2_slice, l2_index + i, new_l2_entry);
2045 if (has_subclusters(s)) {
2046 set_l2_bitmap(s, l2_slice, l2_index + i, new_l2_bitmap);
2049 /* Then decrease the refcount */
2050 if (unmap) {
2051 qcow2_free_any_cluster(bs, old_l2_entry, QCOW2_DISCARD_REQUEST);
2055 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
2057 return nb_clusters;
2060 static int zero_l2_subclusters(BlockDriverState *bs, uint64_t offset,
2061 unsigned nb_subclusters)
2063 BDRVQcow2State *s = bs->opaque;
2064 uint64_t *l2_slice;
2065 uint64_t old_l2_bitmap, l2_bitmap;
2066 int l2_index, ret, sc = offset_to_sc_index(s, offset);
2068 /* For full clusters use zero_in_l2_slice() instead */
2069 assert(nb_subclusters > 0 && nb_subclusters < s->subclusters_per_cluster);
2070 assert(sc + nb_subclusters <= s->subclusters_per_cluster);
2071 assert(offset_into_subcluster(s, offset) == 0);
2073 ret = get_cluster_table(bs, offset, &l2_slice, &l2_index);
2074 if (ret < 0) {
2075 return ret;
2078 switch (qcow2_get_cluster_type(bs, get_l2_entry(s, l2_slice, l2_index))) {
2079 case QCOW2_CLUSTER_COMPRESSED:
2080 ret = -ENOTSUP; /* We cannot partially zeroize compressed clusters */
2081 goto out;
2082 case QCOW2_CLUSTER_NORMAL:
2083 case QCOW2_CLUSTER_UNALLOCATED:
2084 break;
2085 default:
2086 g_assert_not_reached();
2089 old_l2_bitmap = l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index);
2091 l2_bitmap |= QCOW_OFLAG_SUB_ZERO_RANGE(sc, sc + nb_subclusters);
2092 l2_bitmap &= ~QCOW_OFLAG_SUB_ALLOC_RANGE(sc, sc + nb_subclusters);
2094 if (old_l2_bitmap != l2_bitmap) {
2095 set_l2_bitmap(s, l2_slice, l2_index, l2_bitmap);
2096 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2099 ret = 0;
2100 out:
2101 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
2103 return ret;
2106 int qcow2_subcluster_zeroize(BlockDriverState *bs, uint64_t offset,
2107 uint64_t bytes, int flags)
2109 BDRVQcow2State *s = bs->opaque;
2110 uint64_t end_offset = offset + bytes;
2111 uint64_t nb_clusters;
2112 unsigned head, tail;
2113 int64_t cleared;
2114 int ret;
2116 /* If we have to stay in sync with an external data file, zero out
2117 * s->data_file first. */
2118 if (data_file_is_raw(bs)) {
2119 assert(has_data_file(bs));
2120 ret = bdrv_co_pwrite_zeroes(s->data_file, offset, bytes, flags);
2121 if (ret < 0) {
2122 return ret;
2126 /* Caller must pass aligned values, except at image end */
2127 assert(offset_into_subcluster(s, offset) == 0);
2128 assert(offset_into_subcluster(s, end_offset) == 0 ||
2129 end_offset >= bs->total_sectors << BDRV_SECTOR_BITS);
2132 * The zero flag is only supported by version 3 and newer. However, if we
2133 * have no backing file, we can resort to discard in version 2.
2135 if (s->qcow_version < 3) {
2136 if (!bs->backing) {
2137 return qcow2_cluster_discard(bs, offset, bytes,
2138 QCOW2_DISCARD_REQUEST, false);
2140 return -ENOTSUP;
2143 head = MIN(end_offset, ROUND_UP(offset, s->cluster_size)) - offset;
2144 offset += head;
2146 tail = (end_offset >= bs->total_sectors << BDRV_SECTOR_BITS) ? 0 :
2147 end_offset - MAX(offset, start_of_cluster(s, end_offset));
2148 end_offset -= tail;
2150 s->cache_discards = true;
2152 if (head) {
2153 ret = zero_l2_subclusters(bs, offset - head,
2154 size_to_subclusters(s, head));
2155 if (ret < 0) {
2156 goto fail;
2160 /* Each L2 slice is handled by its own loop iteration */
2161 nb_clusters = size_to_clusters(s, end_offset - offset);
2163 while (nb_clusters > 0) {
2164 cleared = zero_in_l2_slice(bs, offset, nb_clusters, flags);
2165 if (cleared < 0) {
2166 ret = cleared;
2167 goto fail;
2170 nb_clusters -= cleared;
2171 offset += (cleared * s->cluster_size);
2174 if (tail) {
2175 ret = zero_l2_subclusters(bs, end_offset, size_to_subclusters(s, tail));
2176 if (ret < 0) {
2177 goto fail;
2181 ret = 0;
2182 fail:
2183 s->cache_discards = false;
2184 qcow2_process_discards(bs, ret);
2186 return ret;
2190 * Expands all zero clusters in a specific L1 table (or deallocates them, for
2191 * non-backed non-pre-allocated zero clusters).
2193 * l1_entries and *visited_l1_entries are used to keep track of progress for
2194 * status_cb(). l1_entries contains the total number of L1 entries and
2195 * *visited_l1_entries counts all visited L1 entries.
2197 static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
2198 int l1_size, int64_t *visited_l1_entries,
2199 int64_t l1_entries,
2200 BlockDriverAmendStatusCB *status_cb,
2201 void *cb_opaque)
2203 BDRVQcow2State *s = bs->opaque;
2204 bool is_active_l1 = (l1_table == s->l1_table);
2205 uint64_t *l2_slice = NULL;
2206 unsigned slice, slice_size2, n_slices;
2207 int ret;
2208 int i, j;
2210 /* qcow2_downgrade() is not allowed in images with subclusters */
2211 assert(!has_subclusters(s));
2213 slice_size2 = s->l2_slice_size * l2_entry_size(s);
2214 n_slices = s->cluster_size / slice_size2;
2216 if (!is_active_l1) {
2217 /* inactive L2 tables require a buffer to be stored in when loading
2218 * them from disk */
2219 l2_slice = qemu_try_blockalign(bs->file->bs, slice_size2);
2220 if (l2_slice == NULL) {
2221 return -ENOMEM;
2225 for (i = 0; i < l1_size; i++) {
2226 uint64_t l2_offset = l1_table[i] & L1E_OFFSET_MASK;
2227 uint64_t l2_refcount;
2229 if (!l2_offset) {
2230 /* unallocated */
2231 (*visited_l1_entries)++;
2232 if (status_cb) {
2233 status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque);
2235 continue;
2238 if (offset_into_cluster(s, l2_offset)) {
2239 qcow2_signal_corruption(bs, true, -1, -1, "L2 table offset %#"
2240 PRIx64 " unaligned (L1 index: %#x)",
2241 l2_offset, i);
2242 ret = -EIO;
2243 goto fail;
2246 ret = qcow2_get_refcount(bs, l2_offset >> s->cluster_bits,
2247 &l2_refcount);
2248 if (ret < 0) {
2249 goto fail;
2252 for (slice = 0; slice < n_slices; slice++) {
2253 uint64_t slice_offset = l2_offset + slice * slice_size2;
2254 bool l2_dirty = false;
2255 if (is_active_l1) {
2256 /* get active L2 tables from cache */
2257 ret = qcow2_cache_get(bs, s->l2_table_cache, slice_offset,
2258 (void **)&l2_slice);
2259 } else {
2260 /* load inactive L2 tables from disk */
2261 ret = bdrv_pread(bs->file, slice_offset, l2_slice, slice_size2);
2263 if (ret < 0) {
2264 goto fail;
2267 for (j = 0; j < s->l2_slice_size; j++) {
2268 uint64_t l2_entry = get_l2_entry(s, l2_slice, j);
2269 int64_t offset = l2_entry & L2E_OFFSET_MASK;
2270 QCow2ClusterType cluster_type =
2271 qcow2_get_cluster_type(bs, l2_entry);
2273 if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN &&
2274 cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) {
2275 continue;
2278 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
2279 if (!bs->backing) {
2281 * not backed; therefore we can simply deallocate the
2282 * cluster. No need to call set_l2_bitmap(), this
2283 * function doesn't support images with subclusters.
2285 set_l2_entry(s, l2_slice, j, 0);
2286 l2_dirty = true;
2287 continue;
2290 offset = qcow2_alloc_clusters(bs, s->cluster_size);
2291 if (offset < 0) {
2292 ret = offset;
2293 goto fail;
2296 /* The offset must fit in the offset field */
2297 assert((offset & L2E_OFFSET_MASK) == offset);
2299 if (l2_refcount > 1) {
2300 /* For shared L2 tables, set the refcount accordingly
2301 * (it is already 1 and needs to be l2_refcount) */
2302 ret = qcow2_update_cluster_refcount(
2303 bs, offset >> s->cluster_bits,
2304 refcount_diff(1, l2_refcount), false,
2305 QCOW2_DISCARD_OTHER);
2306 if (ret < 0) {
2307 qcow2_free_clusters(bs, offset, s->cluster_size,
2308 QCOW2_DISCARD_OTHER);
2309 goto fail;
2314 if (offset_into_cluster(s, offset)) {
2315 int l2_index = slice * s->l2_slice_size + j;
2316 qcow2_signal_corruption(
2317 bs, true, -1, -1,
2318 "Cluster allocation offset "
2319 "%#" PRIx64 " unaligned (L2 offset: %#"
2320 PRIx64 ", L2 index: %#x)", offset,
2321 l2_offset, l2_index);
2322 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
2323 qcow2_free_clusters(bs, offset, s->cluster_size,
2324 QCOW2_DISCARD_ALWAYS);
2326 ret = -EIO;
2327 goto fail;
2330 ret = qcow2_pre_write_overlap_check(bs, 0, offset,
2331 s->cluster_size, true);
2332 if (ret < 0) {
2333 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
2334 qcow2_free_clusters(bs, offset, s->cluster_size,
2335 QCOW2_DISCARD_ALWAYS);
2337 goto fail;
2340 ret = bdrv_pwrite_zeroes(s->data_file, offset,
2341 s->cluster_size, 0);
2342 if (ret < 0) {
2343 if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
2344 qcow2_free_clusters(bs, offset, s->cluster_size,
2345 QCOW2_DISCARD_ALWAYS);
2347 goto fail;
2350 if (l2_refcount == 1) {
2351 set_l2_entry(s, l2_slice, j, offset | QCOW_OFLAG_COPIED);
2352 } else {
2353 set_l2_entry(s, l2_slice, j, offset);
2356 * No need to call set_l2_bitmap() after set_l2_entry() because
2357 * this function doesn't support images with subclusters.
2359 l2_dirty = true;
2362 if (is_active_l1) {
2363 if (l2_dirty) {
2364 qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
2365 qcow2_cache_depends_on_flush(s->l2_table_cache);
2367 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
2368 } else {
2369 if (l2_dirty) {
2370 ret = qcow2_pre_write_overlap_check(
2371 bs, QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2,
2372 slice_offset, slice_size2, false);
2373 if (ret < 0) {
2374 goto fail;
2377 ret = bdrv_pwrite(bs->file, slice_offset,
2378 l2_slice, slice_size2);
2379 if (ret < 0) {
2380 goto fail;
2386 (*visited_l1_entries)++;
2387 if (status_cb) {
2388 status_cb(bs, *visited_l1_entries, l1_entries, cb_opaque);
2392 ret = 0;
2394 fail:
2395 if (l2_slice) {
2396 if (!is_active_l1) {
2397 qemu_vfree(l2_slice);
2398 } else {
2399 qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
2402 return ret;
2406 * For backed images, expands all zero clusters on the image. For non-backed
2407 * images, deallocates all non-pre-allocated zero clusters (and claims the
2408 * allocation for pre-allocated ones). This is important for downgrading to a
2409 * qcow2 version which doesn't yet support metadata zero clusters.
2411 int qcow2_expand_zero_clusters(BlockDriverState *bs,
2412 BlockDriverAmendStatusCB *status_cb,
2413 void *cb_opaque)
2415 BDRVQcow2State *s = bs->opaque;
2416 uint64_t *l1_table = NULL;
2417 int64_t l1_entries = 0, visited_l1_entries = 0;
2418 int ret;
2419 int i, j;
2421 if (status_cb) {
2422 l1_entries = s->l1_size;
2423 for (i = 0; i < s->nb_snapshots; i++) {
2424 l1_entries += s->snapshots[i].l1_size;
2428 ret = expand_zero_clusters_in_l1(bs, s->l1_table, s->l1_size,
2429 &visited_l1_entries, l1_entries,
2430 status_cb, cb_opaque);
2431 if (ret < 0) {
2432 goto fail;
2435 /* Inactive L1 tables may point to active L2 tables - therefore it is
2436 * necessary to flush the L2 table cache before trying to access the L2
2437 * tables pointed to by inactive L1 entries (else we might try to expand
2438 * zero clusters that have already been expanded); furthermore, it is also
2439 * necessary to empty the L2 table cache, since it may contain tables which
2440 * are now going to be modified directly on disk, bypassing the cache.
2441 * qcow2_cache_empty() does both for us. */
2442 ret = qcow2_cache_empty(bs, s->l2_table_cache);
2443 if (ret < 0) {
2444 goto fail;
2447 for (i = 0; i < s->nb_snapshots; i++) {
2448 int l1_size2;
2449 uint64_t *new_l1_table;
2450 Error *local_err = NULL;
2452 ret = qcow2_validate_table(bs, s->snapshots[i].l1_table_offset,
2453 s->snapshots[i].l1_size, L1E_SIZE,
2454 QCOW_MAX_L1_SIZE, "Snapshot L1 table",
2455 &local_err);
2456 if (ret < 0) {
2457 error_report_err(local_err);
2458 goto fail;
2461 l1_size2 = s->snapshots[i].l1_size * L1E_SIZE;
2462 new_l1_table = g_try_realloc(l1_table, l1_size2);
2464 if (!new_l1_table) {
2465 ret = -ENOMEM;
2466 goto fail;
2469 l1_table = new_l1_table;
2471 ret = bdrv_pread(bs->file, s->snapshots[i].l1_table_offset,
2472 l1_table, l1_size2);
2473 if (ret < 0) {
2474 goto fail;
2477 for (j = 0; j < s->snapshots[i].l1_size; j++) {
2478 be64_to_cpus(&l1_table[j]);
2481 ret = expand_zero_clusters_in_l1(bs, l1_table, s->snapshots[i].l1_size,
2482 &visited_l1_entries, l1_entries,
2483 status_cb, cb_opaque);
2484 if (ret < 0) {
2485 goto fail;
2489 ret = 0;
2491 fail:
2492 g_free(l1_table);
2493 return ret;
2496 void qcow2_parse_compressed_l2_entry(BlockDriverState *bs, uint64_t l2_entry,
2497 uint64_t *coffset, int *csize)
2499 BDRVQcow2State *s = bs->opaque;
2500 int nb_csectors;
2502 assert(qcow2_get_cluster_type(bs, l2_entry) == QCOW2_CLUSTER_COMPRESSED);
2504 *coffset = l2_entry & s->cluster_offset_mask;
2506 nb_csectors = ((l2_entry >> s->csize_shift) & s->csize_mask) + 1;
2507 *csize = nb_csectors * QCOW2_COMPRESSED_SECTOR_SIZE -
2508 (*coffset & (QCOW2_COMPRESSED_SECTOR_SIZE - 1));