hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3)
[qemu/armbru.git] / target / xtensa / helper.c
blobca214b948a965a1a30f134e1b8cabd7dedd413c6
1 /*
2 * Copyright (c) 2011, Max Filippov, Open Source and Linux Lab.
3 * All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are met:
7 * * Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * * Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 * * Neither the name of the Open Source and Linux Lab nor the
13 * names of its contributors may be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
20 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
23 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
25 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 #include "qemu/osdep.h"
29 #include "qemu/log.h"
30 #include "cpu.h"
31 #include "exec/exec-all.h"
32 #include "gdbstub/helpers.h"
33 #include "exec/helper-proto.h"
34 #include "qemu/error-report.h"
35 #include "qemu/qemu-print.h"
36 #include "qemu/host-utils.h"
38 static struct XtensaConfigList *xtensa_cores;
40 static void add_translator_to_hash(GHashTable *translator,
41 const char *name,
42 const XtensaOpcodeOps *opcode)
44 if (!g_hash_table_insert(translator, (void *)name, (void *)opcode)) {
45 error_report("Multiple definitions of '%s' opcode in a single table",
46 name);
50 static GHashTable *hash_opcode_translators(const XtensaOpcodeTranslators *t)
52 unsigned i, j;
53 GHashTable *translator = g_hash_table_new(g_str_hash, g_str_equal);
55 for (i = 0; i < t->num_opcodes; ++i) {
56 if (t->opcode[i].op_flags & XTENSA_OP_NAME_ARRAY) {
57 const char * const *name = t->opcode[i].name;
59 for (j = 0; name[j]; ++j) {
60 add_translator_to_hash(translator,
61 (void *)name[j],
62 (void *)(t->opcode + i));
64 } else {
65 add_translator_to_hash(translator,
66 (void *)t->opcode[i].name,
67 (void *)(t->opcode + i));
70 return translator;
73 static XtensaOpcodeOps *
74 xtensa_find_opcode_ops(const XtensaOpcodeTranslators *t,
75 const char *name)
77 static GHashTable *translators;
78 GHashTable *translator;
80 if (translators == NULL) {
81 translators = g_hash_table_new(g_direct_hash, g_direct_equal);
83 translator = g_hash_table_lookup(translators, t);
84 if (translator == NULL) {
85 translator = hash_opcode_translators(t);
86 g_hash_table_insert(translators, (void *)t, translator);
88 return g_hash_table_lookup(translator, name);
91 static void init_libisa(XtensaConfig *config)
93 unsigned i, j;
94 unsigned opcodes;
95 unsigned formats;
96 unsigned regfiles;
98 config->isa = xtensa_isa_init(config->isa_internal, NULL, NULL);
99 assert(xtensa_isa_maxlength(config->isa) <= MAX_INSN_LENGTH);
100 assert(xtensa_insnbuf_size(config->isa) <= MAX_INSNBUF_LENGTH);
101 opcodes = xtensa_isa_num_opcodes(config->isa);
102 formats = xtensa_isa_num_formats(config->isa);
103 regfiles = xtensa_isa_num_regfiles(config->isa);
104 config->opcode_ops = g_new(XtensaOpcodeOps *, opcodes);
106 for (i = 0; i < formats; ++i) {
107 assert(xtensa_format_num_slots(config->isa, i) <= MAX_INSN_SLOTS);
110 for (i = 0; i < opcodes; ++i) {
111 const char *opc_name = xtensa_opcode_name(config->isa, i);
112 XtensaOpcodeOps *ops = NULL;
114 assert(xtensa_opcode_num_operands(config->isa, i) <= MAX_OPCODE_ARGS);
115 if (!config->opcode_translators) {
116 ops = xtensa_find_opcode_ops(&xtensa_core_opcodes, opc_name);
117 } else {
118 for (j = 0; !ops && config->opcode_translators[j]; ++j) {
119 ops = xtensa_find_opcode_ops(config->opcode_translators[j],
120 opc_name);
123 #ifdef DEBUG
124 if (ops == NULL) {
125 fprintf(stderr,
126 "opcode translator not found for %s's opcode '%s'\n",
127 config->name, opc_name);
129 #endif
130 config->opcode_ops[i] = ops;
132 config->a_regfile = xtensa_regfile_lookup(config->isa, "AR");
134 config->regfile = g_new(void **, regfiles);
135 for (i = 0; i < regfiles; ++i) {
136 const char *name = xtensa_regfile_name(config->isa, i);
137 int entries = xtensa_regfile_num_entries(config->isa, i);
138 int bits = xtensa_regfile_num_bits(config->isa, i);
140 config->regfile[i] = xtensa_get_regfile_by_name(name, entries, bits);
141 #ifdef DEBUG
142 if (config->regfile[i] == NULL) {
143 fprintf(stderr, "regfile '%s' not found for %s\n",
144 name, config->name);
146 #endif
148 xtensa_collect_sr_names(config);
151 static void xtensa_finalize_config(XtensaConfig *config)
153 if (config->isa_internal) {
154 init_libisa(config);
157 if (config->gdb_regmap.num_regs == 0 ||
158 config->gdb_regmap.num_core_regs == 0) {
159 unsigned n_regs = 0;
160 unsigned n_core_regs = 0;
162 xtensa_count_regs(config, &n_regs, &n_core_regs);
163 if (config->gdb_regmap.num_regs == 0) {
164 config->gdb_regmap.num_regs = n_regs;
166 if (config->gdb_regmap.num_core_regs == 0) {
167 config->gdb_regmap.num_core_regs = n_core_regs;
172 static void xtensa_core_class_init(ObjectClass *oc, void *data)
174 CPUClass *cc = CPU_CLASS(oc);
175 XtensaCPUClass *xcc = XTENSA_CPU_CLASS(oc);
176 XtensaConfig *config = data;
178 xtensa_finalize_config(config);
179 xcc->config = config;
182 * Use num_core_regs to see only non-privileged registers in an unmodified
183 * gdb. Use num_regs to see all registers. gdb modification is required
184 * for that: reset bit 0 in the 'flags' field of the registers definitions
185 * in the gdb/xtensa-config.c inside gdb source tree or inside gdb overlay.
187 cc->gdb_num_core_regs = config->gdb_regmap.num_regs;
190 void xtensa_register_core(XtensaConfigList *node)
192 TypeInfo type = {
193 .parent = TYPE_XTENSA_CPU,
194 .class_init = xtensa_core_class_init,
195 .class_data = (void *)node->config,
198 node->next = xtensa_cores;
199 xtensa_cores = node;
200 type.name = g_strdup_printf(XTENSA_CPU_TYPE_NAME("%s"), node->config->name);
201 type_register(&type);
202 g_free((gpointer)type.name);
205 static uint32_t check_hw_breakpoints(CPUXtensaState *env)
207 unsigned i;
209 for (i = 0; i < env->config->ndbreak; ++i) {
210 if (env->cpu_watchpoint[i] &&
211 env->cpu_watchpoint[i]->flags & BP_WATCHPOINT_HIT) {
212 return DEBUGCAUSE_DB | (i << DEBUGCAUSE_DBNUM_SHIFT);
215 return 0;
218 void xtensa_breakpoint_handler(CPUState *cs)
220 CPUXtensaState *env = cpu_env(cs);
222 if (cs->watchpoint_hit) {
223 if (cs->watchpoint_hit->flags & BP_CPU) {
224 uint32_t cause;
226 cs->watchpoint_hit = NULL;
227 cause = check_hw_breakpoints(env);
228 if (cause) {
229 debug_exception_env(env, cause);
231 cpu_loop_exit_noexc(cs);
233 } else {
234 if (cpu_breakpoint_test(cs, env->pc, BP_GDB)
235 || !cpu_breakpoint_test(cs, env->pc, BP_CPU)) {
236 return;
238 if (env->sregs[ICOUNT] == 0xffffffff &&
239 xtensa_get_cintlevel(env) < env->sregs[ICOUNTLEVEL]) {
240 debug_exception_env(env, DEBUGCAUSE_IC);
241 } else {
242 debug_exception_env(env, DEBUGCAUSE_IB);
244 cpu_loop_exit_noexc(cs);
248 #ifndef CONFIG_USER_ONLY
249 void xtensa_cpu_do_unaligned_access(CPUState *cs,
250 vaddr addr, MMUAccessType access_type,
251 int mmu_idx, uintptr_t retaddr)
253 XtensaCPU *cpu = XTENSA_CPU(cs);
254 CPUXtensaState *env = &cpu->env;
256 assert(xtensa_option_enabled(env->config,
257 XTENSA_OPTION_UNALIGNED_EXCEPTION));
258 cpu_restore_state(CPU(cpu), retaddr);
259 HELPER(exception_cause_vaddr)(env,
260 env->pc, LOAD_STORE_ALIGNMENT_CAUSE,
261 addr);
264 bool xtensa_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
265 MMUAccessType access_type, int mmu_idx,
266 bool probe, uintptr_t retaddr)
268 CPUXtensaState *env = cpu_env(cs);
269 uint32_t paddr;
270 uint32_t page_size;
271 unsigned access;
272 int ret = xtensa_get_physical_addr(env, true, address, access_type,
273 mmu_idx, &paddr, &page_size, &access);
275 qemu_log_mask(CPU_LOG_MMU, "%s(%08" VADDR_PRIx
276 ", %d, %d) -> %08x, ret = %d\n",
277 __func__, address, access_type, mmu_idx, paddr, ret);
279 if (ret == 0) {
280 tlb_set_page(cs,
281 address & TARGET_PAGE_MASK,
282 paddr & TARGET_PAGE_MASK,
283 access, mmu_idx, page_size);
284 return true;
285 } else if (probe) {
286 return false;
287 } else {
288 cpu_restore_state(cs, retaddr);
289 HELPER(exception_cause_vaddr)(env, env->pc, ret, address);
293 void xtensa_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, vaddr addr,
294 unsigned size, MMUAccessType access_type,
295 int mmu_idx, MemTxAttrs attrs,
296 MemTxResult response, uintptr_t retaddr)
298 CPUXtensaState *env = cpu_env(cs);
300 cpu_restore_state(cs, retaddr);
301 HELPER(exception_cause_vaddr)(env, env->pc,
302 access_type == MMU_INST_FETCH ?
303 INSTR_PIF_ADDR_ERROR_CAUSE :
304 LOAD_STORE_PIF_ADDR_ERROR_CAUSE,
305 addr);
308 void xtensa_runstall(CPUXtensaState *env, bool runstall)
310 CPUState *cpu = env_cpu(env);
312 env->runstall = runstall;
313 cpu->halted = runstall;
314 if (runstall) {
315 cpu_interrupt(cpu, CPU_INTERRUPT_HALT);
316 } else {
317 qemu_cpu_kick(cpu);
320 #endif /* !CONFIG_USER_ONLY */