4 * Copyright (c) 2003-2008 Fabrice Bellard
5 * Copyright (c) 2009-2015 Red Hat Inc
8 * Juan Quintela <quintela@redhat.com>
10 * Permission is hereby granted, free of charge, to any person obtaining a copy
11 * of this software and associated documentation files (the "Software"), to deal
12 * in the Software without restriction, including without limitation the rights
13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
14 * copies of the Software, and to permit persons to whom the Software is
15 * furnished to do so, subject to the following conditions:
17 * The above copyright notice and this permission notice shall be included in
18 * all copies or substantial portions of the Software.
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
29 #include "qemu/osdep.h"
30 #include "hw/boards.h"
31 #include "hw/xen/xen.h"
33 #include "migration.h"
34 #include "migration/snapshot.h"
35 #include "migration/misc.h"
36 #include "migration/register.h"
37 #include "migration/global_state.h"
39 #include "qemu-file-channel.h"
40 #include "qemu-file.h"
42 #include "postcopy-ram.h"
43 #include "qapi/qmp/qerror.h"
44 #include "qemu/error-report.h"
45 #include "sysemu/cpus.h"
46 #include "exec/memory.h"
47 #include "exec/target_page.h"
48 #include "qmp-commands.h"
51 #include "block/snapshot.h"
52 #include "qemu/cutils.h"
53 #include "io/channel-buffer.h"
54 #include "io/channel-file.h"
57 #define ETH_P_RARP 0x8035
59 #define ARP_HTYPE_ETH 0x0001
60 #define ARP_PTYPE_IP 0x0800
61 #define ARP_OP_REQUEST_REV 0x3
63 const unsigned int postcopy_ram_discard_version
= 0;
65 /* Subcommands for QEMU_VM_COMMAND */
67 MIG_CMD_INVALID
= 0, /* Must be 0 */
68 MIG_CMD_OPEN_RETURN_PATH
, /* Tell the dest to open the Return path */
69 MIG_CMD_PING
, /* Request a PONG on the RP */
71 MIG_CMD_POSTCOPY_ADVISE
, /* Prior to any page transfers, just
72 warn we might want to do PC */
73 MIG_CMD_POSTCOPY_LISTEN
, /* Start listening for incoming
74 pages as it's running. */
75 MIG_CMD_POSTCOPY_RUN
, /* Start execution */
77 MIG_CMD_POSTCOPY_RAM_DISCARD
, /* A list of pages to discard that
78 were previously sent during
79 precopy but are dirty. */
80 MIG_CMD_PACKAGED
, /* Send a wrapped stream within this stream */
84 #define MAX_VM_CMD_PACKAGED_SIZE (1ul << 24)
85 static struct mig_cmd_args
{
86 ssize_t len
; /* -1 = variable */
89 [MIG_CMD_INVALID
] = { .len
= -1, .name
= "INVALID" },
90 [MIG_CMD_OPEN_RETURN_PATH
] = { .len
= 0, .name
= "OPEN_RETURN_PATH" },
91 [MIG_CMD_PING
] = { .len
= sizeof(uint32_t), .name
= "PING" },
92 [MIG_CMD_POSTCOPY_ADVISE
] = { .len
= -1, .name
= "POSTCOPY_ADVISE" },
93 [MIG_CMD_POSTCOPY_LISTEN
] = { .len
= 0, .name
= "POSTCOPY_LISTEN" },
94 [MIG_CMD_POSTCOPY_RUN
] = { .len
= 0, .name
= "POSTCOPY_RUN" },
95 [MIG_CMD_POSTCOPY_RAM_DISCARD
] = {
96 .len
= -1, .name
= "POSTCOPY_RAM_DISCARD" },
97 [MIG_CMD_PACKAGED
] = { .len
= 4, .name
= "PACKAGED" },
98 [MIG_CMD_MAX
] = { .len
= -1, .name
= "MAX" },
101 /* Note for MIG_CMD_POSTCOPY_ADVISE:
102 * The format of arguments is depending on postcopy mode:
103 * - postcopy RAM only
104 * uint64_t host page size
105 * uint64_t taget page size
107 * - postcopy RAM and postcopy dirty bitmaps
108 * format is the same as for postcopy RAM only
110 * - postcopy dirty bitmaps only
111 * Nothing. Command length field is 0.
113 * Be careful: adding a new postcopy entity with some other parameters should
114 * not break format self-description ability. Good way is to introduce some
115 * generic extendable format with an exception for two old entities.
118 static int announce_self_create(uint8_t *buf
,
121 /* Ethernet header. */
122 memset(buf
, 0xff, 6); /* destination MAC addr */
123 memcpy(buf
+ 6, mac_addr
, 6); /* source MAC addr */
124 *(uint16_t *)(buf
+ 12) = htons(ETH_P_RARP
); /* ethertype */
127 *(uint16_t *)(buf
+ 14) = htons(ARP_HTYPE_ETH
); /* hardware addr space */
128 *(uint16_t *)(buf
+ 16) = htons(ARP_PTYPE_IP
); /* protocol addr space */
129 *(buf
+ 18) = 6; /* hardware addr length (ethernet) */
130 *(buf
+ 19) = 4; /* protocol addr length (IPv4) */
131 *(uint16_t *)(buf
+ 20) = htons(ARP_OP_REQUEST_REV
); /* opcode */
132 memcpy(buf
+ 22, mac_addr
, 6); /* source hw addr */
133 memset(buf
+ 28, 0x00, 4); /* source protocol addr */
134 memcpy(buf
+ 32, mac_addr
, 6); /* target hw addr */
135 memset(buf
+ 38, 0x00, 4); /* target protocol addr */
137 /* Padding to get up to 60 bytes (ethernet min packet size, minus FCS). */
138 memset(buf
+ 42, 0x00, 18);
140 return 60; /* len (FCS will be added by hardware) */
143 static void qemu_announce_self_iter(NICState
*nic
, void *opaque
)
148 trace_qemu_announce_self_iter(qemu_ether_ntoa(&nic
->conf
->macaddr
));
149 len
= announce_self_create(buf
, nic
->conf
->macaddr
.a
);
151 qemu_send_packet_raw(qemu_get_queue(nic
), buf
, len
);
155 static void qemu_announce_self_once(void *opaque
)
157 static int count
= SELF_ANNOUNCE_ROUNDS
;
158 QEMUTimer
*timer
= *(QEMUTimer
**)opaque
;
160 qemu_foreach_nic(qemu_announce_self_iter
, NULL
);
163 /* delay 50ms, 150ms, 250ms, ... */
164 timer_mod(timer
, qemu_clock_get_ms(QEMU_CLOCK_REALTIME
) +
165 self_announce_delay(count
));
172 void qemu_announce_self(void)
174 static QEMUTimer
*timer
;
175 timer
= timer_new_ms(QEMU_CLOCK_REALTIME
, qemu_announce_self_once
, &timer
);
176 qemu_announce_self_once(&timer
);
179 /***********************************************************/
180 /* savevm/loadvm support */
182 static ssize_t
block_writev_buffer(void *opaque
, struct iovec
*iov
, int iovcnt
,
188 qemu_iovec_init_external(&qiov
, iov
, iovcnt
);
189 ret
= bdrv_writev_vmstate(opaque
, &qiov
, pos
);
197 static ssize_t
block_get_buffer(void *opaque
, uint8_t *buf
, int64_t pos
,
200 return bdrv_load_vmstate(opaque
, buf
, pos
, size
);
203 static int bdrv_fclose(void *opaque
)
205 return bdrv_flush(opaque
);
208 static const QEMUFileOps bdrv_read_ops
= {
209 .get_buffer
= block_get_buffer
,
213 static const QEMUFileOps bdrv_write_ops
= {
214 .writev_buffer
= block_writev_buffer
,
218 static QEMUFile
*qemu_fopen_bdrv(BlockDriverState
*bs
, int is_writable
)
221 return qemu_fopen_ops(bs
, &bdrv_write_ops
);
223 return qemu_fopen_ops(bs
, &bdrv_read_ops
);
227 /* QEMUFile timer support.
228 * Not in qemu-file.c to not add qemu-timer.c as dependency to qemu-file.c
231 void timer_put(QEMUFile
*f
, QEMUTimer
*ts
)
233 uint64_t expire_time
;
235 expire_time
= timer_expire_time_ns(ts
);
236 qemu_put_be64(f
, expire_time
);
239 void timer_get(QEMUFile
*f
, QEMUTimer
*ts
)
241 uint64_t expire_time
;
243 expire_time
= qemu_get_be64(f
);
244 if (expire_time
!= -1) {
245 timer_mod_ns(ts
, expire_time
);
252 /* VMState timer support.
253 * Not in vmstate.c to not add qemu-timer.c as dependency to vmstate.c
256 static int get_timer(QEMUFile
*f
, void *pv
, size_t size
, VMStateField
*field
)
263 static int put_timer(QEMUFile
*f
, void *pv
, size_t size
, VMStateField
*field
,
272 const VMStateInfo vmstate_info_timer
= {
279 typedef struct CompatEntry
{
284 typedef struct SaveStateEntry
{
285 QTAILQ_ENTRY(SaveStateEntry
) entry
;
290 /* version id read from the stream */
293 /* section id read from the stream */
296 const VMStateDescription
*vmsd
;
302 typedef struct SaveState
{
303 QTAILQ_HEAD(, SaveStateEntry
) handlers
;
304 int global_section_id
;
307 uint32_t target_page_bits
;
310 static SaveState savevm_state
= {
311 .handlers
= QTAILQ_HEAD_INITIALIZER(savevm_state
.handlers
),
312 .global_section_id
= 0,
315 static int configuration_pre_save(void *opaque
)
317 SaveState
*state
= opaque
;
318 const char *current_name
= MACHINE_GET_CLASS(current_machine
)->name
;
320 state
->len
= strlen(current_name
);
321 state
->name
= current_name
;
322 state
->target_page_bits
= qemu_target_page_bits();
327 static int configuration_pre_load(void *opaque
)
329 SaveState
*state
= opaque
;
331 /* If there is no target-page-bits subsection it means the source
332 * predates the variable-target-page-bits support and is using the
333 * minimum possible value for this CPU.
335 state
->target_page_bits
= qemu_target_page_bits_min();
339 static int configuration_post_load(void *opaque
, int version_id
)
341 SaveState
*state
= opaque
;
342 const char *current_name
= MACHINE_GET_CLASS(current_machine
)->name
;
344 if (strncmp(state
->name
, current_name
, state
->len
) != 0) {
345 error_report("Machine type received is '%.*s' and local is '%s'",
346 (int) state
->len
, state
->name
, current_name
);
350 if (state
->target_page_bits
!= qemu_target_page_bits()) {
351 error_report("Received TARGET_PAGE_BITS is %d but local is %d",
352 state
->target_page_bits
, qemu_target_page_bits());
359 /* The target-page-bits subsection is present only if the
360 * target page size is not the same as the default (ie the
361 * minimum page size for a variable-page-size guest CPU).
362 * If it is present then it contains the actual target page
363 * bits for the machine, and migration will fail if the
364 * two ends don't agree about it.
366 static bool vmstate_target_page_bits_needed(void *opaque
)
368 return qemu_target_page_bits()
369 > qemu_target_page_bits_min();
372 static const VMStateDescription vmstate_target_page_bits
= {
373 .name
= "configuration/target-page-bits",
375 .minimum_version_id
= 1,
376 .needed
= vmstate_target_page_bits_needed
,
377 .fields
= (VMStateField
[]) {
378 VMSTATE_UINT32(target_page_bits
, SaveState
),
379 VMSTATE_END_OF_LIST()
383 static const VMStateDescription vmstate_configuration
= {
384 .name
= "configuration",
386 .pre_load
= configuration_pre_load
,
387 .post_load
= configuration_post_load
,
388 .pre_save
= configuration_pre_save
,
389 .fields
= (VMStateField
[]) {
390 VMSTATE_UINT32(len
, SaveState
),
391 VMSTATE_VBUFFER_ALLOC_UINT32(name
, SaveState
, 0, NULL
, len
),
392 VMSTATE_END_OF_LIST()
394 .subsections
= (const VMStateDescription
*[]) {
395 &vmstate_target_page_bits
,
400 static void dump_vmstate_vmsd(FILE *out_file
,
401 const VMStateDescription
*vmsd
, int indent
,
404 static void dump_vmstate_vmsf(FILE *out_file
, const VMStateField
*field
,
407 fprintf(out_file
, "%*s{\n", indent
, "");
409 fprintf(out_file
, "%*s\"field\": \"%s\",\n", indent
, "", field
->name
);
410 fprintf(out_file
, "%*s\"version_id\": %d,\n", indent
, "",
412 fprintf(out_file
, "%*s\"field_exists\": %s,\n", indent
, "",
413 field
->field_exists
? "true" : "false");
414 fprintf(out_file
, "%*s\"size\": %zu", indent
, "", field
->size
);
415 if (field
->vmsd
!= NULL
) {
416 fprintf(out_file
, ",\n");
417 dump_vmstate_vmsd(out_file
, field
->vmsd
, indent
, false);
419 fprintf(out_file
, "\n%*s}", indent
- 2, "");
422 static void dump_vmstate_vmss(FILE *out_file
,
423 const VMStateDescription
**subsection
,
426 if (*subsection
!= NULL
) {
427 dump_vmstate_vmsd(out_file
, *subsection
, indent
, true);
431 static void dump_vmstate_vmsd(FILE *out_file
,
432 const VMStateDescription
*vmsd
, int indent
,
436 fprintf(out_file
, "%*s{\n", indent
, "");
438 fprintf(out_file
, "%*s\"%s\": {\n", indent
, "", "Description");
441 fprintf(out_file
, "%*s\"name\": \"%s\",\n", indent
, "", vmsd
->name
);
442 fprintf(out_file
, "%*s\"version_id\": %d,\n", indent
, "",
444 fprintf(out_file
, "%*s\"minimum_version_id\": %d", indent
, "",
445 vmsd
->minimum_version_id
);
446 if (vmsd
->fields
!= NULL
) {
447 const VMStateField
*field
= vmsd
->fields
;
450 fprintf(out_file
, ",\n%*s\"Fields\": [\n", indent
, "");
452 while (field
->name
!= NULL
) {
453 if (field
->flags
& VMS_MUST_EXIST
) {
454 /* Ignore VMSTATE_VALIDATE bits; these don't get migrated */
459 fprintf(out_file
, ",\n");
461 dump_vmstate_vmsf(out_file
, field
, indent
+ 2);
465 fprintf(out_file
, "\n%*s]", indent
, "");
467 if (vmsd
->subsections
!= NULL
) {
468 const VMStateDescription
**subsection
= vmsd
->subsections
;
471 fprintf(out_file
, ",\n%*s\"Subsections\": [\n", indent
, "");
473 while (*subsection
!= NULL
) {
475 fprintf(out_file
, ",\n");
477 dump_vmstate_vmss(out_file
, subsection
, indent
+ 2);
481 fprintf(out_file
, "\n%*s]", indent
, "");
483 fprintf(out_file
, "\n%*s}", indent
- 2, "");
486 static void dump_machine_type(FILE *out_file
)
490 mc
= MACHINE_GET_CLASS(current_machine
);
492 fprintf(out_file
, " \"vmschkmachine\": {\n");
493 fprintf(out_file
, " \"Name\": \"%s\"\n", mc
->name
);
494 fprintf(out_file
, " },\n");
497 void dump_vmstate_json_to_file(FILE *out_file
)
502 fprintf(out_file
, "{\n");
503 dump_machine_type(out_file
);
506 list
= object_class_get_list(TYPE_DEVICE
, true);
507 for (elt
= list
; elt
; elt
= elt
->next
) {
508 DeviceClass
*dc
= OBJECT_CLASS_CHECK(DeviceClass
, elt
->data
,
518 fprintf(out_file
, ",\n");
520 name
= object_class_get_name(OBJECT_CLASS(dc
));
521 fprintf(out_file
, "%*s\"%s\": {\n", indent
, "", name
);
523 fprintf(out_file
, "%*s\"Name\": \"%s\",\n", indent
, "", name
);
524 fprintf(out_file
, "%*s\"version_id\": %d,\n", indent
, "",
525 dc
->vmsd
->version_id
);
526 fprintf(out_file
, "%*s\"minimum_version_id\": %d,\n", indent
, "",
527 dc
->vmsd
->minimum_version_id
);
529 dump_vmstate_vmsd(out_file
, dc
->vmsd
, indent
, false);
531 fprintf(out_file
, "\n%*s}", indent
- 2, "");
534 fprintf(out_file
, "\n}\n");
538 static int calculate_new_instance_id(const char *idstr
)
543 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
544 if (strcmp(idstr
, se
->idstr
) == 0
545 && instance_id
<= se
->instance_id
) {
546 instance_id
= se
->instance_id
+ 1;
552 static int calculate_compat_instance_id(const char *idstr
)
557 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
562 if (strcmp(idstr
, se
->compat
->idstr
) == 0
563 && instance_id
<= se
->compat
->instance_id
) {
564 instance_id
= se
->compat
->instance_id
+ 1;
570 static inline MigrationPriority
save_state_priority(SaveStateEntry
*se
)
573 return se
->vmsd
->priority
;
575 return MIG_PRI_DEFAULT
;
578 static void savevm_state_handler_insert(SaveStateEntry
*nse
)
580 MigrationPriority priority
= save_state_priority(nse
);
583 assert(priority
<= MIG_PRI_MAX
);
585 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
586 if (save_state_priority(se
) < priority
) {
592 QTAILQ_INSERT_BEFORE(se
, nse
, entry
);
594 QTAILQ_INSERT_TAIL(&savevm_state
.handlers
, nse
, entry
);
598 /* TODO: Individual devices generally have very little idea about the rest
599 of the system, so instance_id should be removed/replaced.
600 Meanwhile pass -1 as instance_id if you do not already have a clearly
601 distinguishing id for all instances of your device class. */
602 int register_savevm_live(DeviceState
*dev
,
611 se
= g_new0(SaveStateEntry
, 1);
612 se
->version_id
= version_id
;
613 se
->section_id
= savevm_state
.global_section_id
++;
617 /* if this is a live_savem then set is_ram */
618 if (ops
->save_setup
!= NULL
) {
623 char *id
= qdev_get_dev_path(dev
);
625 if (snprintf(se
->idstr
, sizeof(se
->idstr
), "%s/", id
) >=
627 error_report("Path too long for VMState (%s)", id
);
635 se
->compat
= g_new0(CompatEntry
, 1);
636 pstrcpy(se
->compat
->idstr
, sizeof(se
->compat
->idstr
), idstr
);
637 se
->compat
->instance_id
= instance_id
== -1 ?
638 calculate_compat_instance_id(idstr
) : instance_id
;
642 pstrcat(se
->idstr
, sizeof(se
->idstr
), idstr
);
644 if (instance_id
== -1) {
645 se
->instance_id
= calculate_new_instance_id(se
->idstr
);
647 se
->instance_id
= instance_id
;
649 assert(!se
->compat
|| se
->instance_id
== 0);
650 savevm_state_handler_insert(se
);
654 void unregister_savevm(DeviceState
*dev
, const char *idstr
, void *opaque
)
656 SaveStateEntry
*se
, *new_se
;
660 char *path
= qdev_get_dev_path(dev
);
662 pstrcpy(id
, sizeof(id
), path
);
663 pstrcat(id
, sizeof(id
), "/");
667 pstrcat(id
, sizeof(id
), idstr
);
669 QTAILQ_FOREACH_SAFE(se
, &savevm_state
.handlers
, entry
, new_se
) {
670 if (strcmp(se
->idstr
, id
) == 0 && se
->opaque
== opaque
) {
671 QTAILQ_REMOVE(&savevm_state
.handlers
, se
, entry
);
678 int vmstate_register_with_alias_id(DeviceState
*dev
, int instance_id
,
679 const VMStateDescription
*vmsd
,
680 void *opaque
, int alias_id
,
681 int required_for_version
,
686 /* If this triggers, alias support can be dropped for the vmsd. */
687 assert(alias_id
== -1 || required_for_version
>= vmsd
->minimum_version_id
);
689 se
= g_new0(SaveStateEntry
, 1);
690 se
->version_id
= vmsd
->version_id
;
691 se
->section_id
= savevm_state
.global_section_id
++;
694 se
->alias_id
= alias_id
;
697 char *id
= qdev_get_dev_path(dev
);
699 if (snprintf(se
->idstr
, sizeof(se
->idstr
), "%s/", id
) >=
701 error_setg(errp
, "Path too long for VMState (%s)", id
);
709 se
->compat
= g_new0(CompatEntry
, 1);
710 pstrcpy(se
->compat
->idstr
, sizeof(se
->compat
->idstr
), vmsd
->name
);
711 se
->compat
->instance_id
= instance_id
== -1 ?
712 calculate_compat_instance_id(vmsd
->name
) : instance_id
;
716 pstrcat(se
->idstr
, sizeof(se
->idstr
), vmsd
->name
);
718 if (instance_id
== -1) {
719 se
->instance_id
= calculate_new_instance_id(se
->idstr
);
721 se
->instance_id
= instance_id
;
723 assert(!se
->compat
|| se
->instance_id
== 0);
724 savevm_state_handler_insert(se
);
728 void vmstate_unregister(DeviceState
*dev
, const VMStateDescription
*vmsd
,
731 SaveStateEntry
*se
, *new_se
;
733 QTAILQ_FOREACH_SAFE(se
, &savevm_state
.handlers
, entry
, new_se
) {
734 if (se
->vmsd
== vmsd
&& se
->opaque
== opaque
) {
735 QTAILQ_REMOVE(&savevm_state
.handlers
, se
, entry
);
742 static int vmstate_load(QEMUFile
*f
, SaveStateEntry
*se
)
744 trace_vmstate_load(se
->idstr
, se
->vmsd
? se
->vmsd
->name
: "(old)");
745 if (!se
->vmsd
) { /* Old style */
746 return se
->ops
->load_state(f
, se
->opaque
, se
->load_version_id
);
748 return vmstate_load_state(f
, se
->vmsd
, se
->opaque
, se
->load_version_id
);
751 static void vmstate_save_old_style(QEMUFile
*f
, SaveStateEntry
*se
, QJSON
*vmdesc
)
753 int64_t old_offset
, size
;
755 old_offset
= qemu_ftell_fast(f
);
756 se
->ops
->save_state(f
, se
->opaque
);
757 size
= qemu_ftell_fast(f
) - old_offset
;
760 json_prop_int(vmdesc
, "size", size
);
761 json_start_array(vmdesc
, "fields");
762 json_start_object(vmdesc
, NULL
);
763 json_prop_str(vmdesc
, "name", "data");
764 json_prop_int(vmdesc
, "size", size
);
765 json_prop_str(vmdesc
, "type", "buffer");
766 json_end_object(vmdesc
);
767 json_end_array(vmdesc
);
771 static int vmstate_save(QEMUFile
*f
, SaveStateEntry
*se
, QJSON
*vmdesc
)
773 trace_vmstate_save(se
->idstr
, se
->vmsd
? se
->vmsd
->name
: "(old)");
775 vmstate_save_old_style(f
, se
, vmdesc
);
778 return vmstate_save_state(f
, se
->vmsd
, se
->opaque
, vmdesc
);
782 * Write the header for device section (QEMU_VM_SECTION START/END/PART/FULL)
784 static void save_section_header(QEMUFile
*f
, SaveStateEntry
*se
,
785 uint8_t section_type
)
787 qemu_put_byte(f
, section_type
);
788 qemu_put_be32(f
, se
->section_id
);
790 if (section_type
== QEMU_VM_SECTION_FULL
||
791 section_type
== QEMU_VM_SECTION_START
) {
793 size_t len
= strlen(se
->idstr
);
794 qemu_put_byte(f
, len
);
795 qemu_put_buffer(f
, (uint8_t *)se
->idstr
, len
);
797 qemu_put_be32(f
, se
->instance_id
);
798 qemu_put_be32(f
, se
->version_id
);
803 * Write a footer onto device sections that catches cases misformatted device
806 static void save_section_footer(QEMUFile
*f
, SaveStateEntry
*se
)
808 if (migrate_get_current()->send_section_footer
) {
809 qemu_put_byte(f
, QEMU_VM_SECTION_FOOTER
);
810 qemu_put_be32(f
, se
->section_id
);
815 * qemu_savevm_command_send: Send a 'QEMU_VM_COMMAND' type element with the
816 * command and associated data.
818 * @f: File to send command on
819 * @command: Command type to send
820 * @len: Length of associated data
821 * @data: Data associated with command.
823 static void qemu_savevm_command_send(QEMUFile
*f
,
824 enum qemu_vm_cmd command
,
828 trace_savevm_command_send(command
, len
);
829 qemu_put_byte(f
, QEMU_VM_COMMAND
);
830 qemu_put_be16(f
, (uint16_t)command
);
831 qemu_put_be16(f
, len
);
832 qemu_put_buffer(f
, data
, len
);
836 void qemu_savevm_send_ping(QEMUFile
*f
, uint32_t value
)
840 trace_savevm_send_ping(value
);
841 buf
= cpu_to_be32(value
);
842 qemu_savevm_command_send(f
, MIG_CMD_PING
, sizeof(value
), (uint8_t *)&buf
);
845 void qemu_savevm_send_open_return_path(QEMUFile
*f
)
847 trace_savevm_send_open_return_path();
848 qemu_savevm_command_send(f
, MIG_CMD_OPEN_RETURN_PATH
, 0, NULL
);
851 /* We have a buffer of data to send; we don't want that all to be loaded
852 * by the command itself, so the command contains just the length of the
853 * extra buffer that we then send straight after it.
854 * TODO: Must be a better way to organise that
860 int qemu_savevm_send_packaged(QEMUFile
*f
, const uint8_t *buf
, size_t len
)
864 if (len
> MAX_VM_CMD_PACKAGED_SIZE
) {
865 error_report("%s: Unreasonably large packaged state: %zu",
870 tmp
= cpu_to_be32(len
);
872 trace_qemu_savevm_send_packaged();
873 qemu_savevm_command_send(f
, MIG_CMD_PACKAGED
, 4, (uint8_t *)&tmp
);
875 qemu_put_buffer(f
, buf
, len
);
880 /* Send prior to any postcopy transfer */
881 void qemu_savevm_send_postcopy_advise(QEMUFile
*f
)
883 if (migrate_postcopy_ram()) {
885 tmp
[0] = cpu_to_be64(ram_pagesize_summary());
886 tmp
[1] = cpu_to_be64(qemu_target_page_size());
888 trace_qemu_savevm_send_postcopy_advise();
889 qemu_savevm_command_send(f
, MIG_CMD_POSTCOPY_ADVISE
,
892 qemu_savevm_command_send(f
, MIG_CMD_POSTCOPY_ADVISE
, 0, NULL
);
896 /* Sent prior to starting the destination running in postcopy, discard pages
897 * that have already been sent but redirtied on the source.
898 * CMD_POSTCOPY_RAM_DISCARD consist of:
900 * byte Length of name field (not including 0)
901 * n x byte RAM block name
902 * byte 0 terminator (just for safety)
903 * n x Byte ranges within the named RAMBlock
904 * be64 Start of the range
907 * name: RAMBlock name that these entries are part of
908 * len: Number of page entries
909 * start_list: 'len' addresses
910 * length_list: 'len' addresses
913 void qemu_savevm_send_postcopy_ram_discard(QEMUFile
*f
, const char *name
,
915 uint64_t *start_list
,
916 uint64_t *length_list
)
921 size_t name_len
= strlen(name
);
923 trace_qemu_savevm_send_postcopy_ram_discard(name
, len
);
924 assert(name_len
< 256);
925 buf
= g_malloc0(1 + 1 + name_len
+ 1 + (8 + 8) * len
);
926 buf
[0] = postcopy_ram_discard_version
;
928 memcpy(buf
+ 2, name
, name_len
);
929 tmplen
= 2 + name_len
;
930 buf
[tmplen
++] = '\0';
932 for (t
= 0; t
< len
; t
++) {
933 stq_be_p(buf
+ tmplen
, start_list
[t
]);
935 stq_be_p(buf
+ tmplen
, length_list
[t
]);
938 qemu_savevm_command_send(f
, MIG_CMD_POSTCOPY_RAM_DISCARD
, tmplen
, buf
);
942 /* Get the destination into a state where it can receive postcopy data. */
943 void qemu_savevm_send_postcopy_listen(QEMUFile
*f
)
945 trace_savevm_send_postcopy_listen();
946 qemu_savevm_command_send(f
, MIG_CMD_POSTCOPY_LISTEN
, 0, NULL
);
949 /* Kick the destination into running */
950 void qemu_savevm_send_postcopy_run(QEMUFile
*f
)
952 trace_savevm_send_postcopy_run();
953 qemu_savevm_command_send(f
, MIG_CMD_POSTCOPY_RUN
, 0, NULL
);
956 bool qemu_savevm_state_blocked(Error
**errp
)
960 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
961 if (se
->vmsd
&& se
->vmsd
->unmigratable
) {
962 error_setg(errp
, "State blocked by non-migratable device '%s'",
970 void qemu_savevm_state_header(QEMUFile
*f
)
972 trace_savevm_state_header();
973 qemu_put_be32(f
, QEMU_VM_FILE_MAGIC
);
974 qemu_put_be32(f
, QEMU_VM_FILE_VERSION
);
976 if (migrate_get_current()->send_configuration
) {
977 qemu_put_byte(f
, QEMU_VM_CONFIGURATION
);
978 vmstate_save_state(f
, &vmstate_configuration
, &savevm_state
, 0);
982 void qemu_savevm_state_setup(QEMUFile
*f
)
987 trace_savevm_state_setup();
988 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
989 if (!se
->ops
|| !se
->ops
->save_setup
) {
992 if (se
->ops
&& se
->ops
->is_active
) {
993 if (!se
->ops
->is_active(se
->opaque
)) {
997 save_section_header(f
, se
, QEMU_VM_SECTION_START
);
999 ret
= se
->ops
->save_setup(f
, se
->opaque
);
1000 save_section_footer(f
, se
);
1002 qemu_file_set_error(f
, ret
);
1009 * this function has three return values:
1010 * negative: there was one error, and we have -errno.
1011 * 0 : We haven't finished, caller have to go again
1012 * 1 : We have finished, we can go to complete phase
1014 int qemu_savevm_state_iterate(QEMUFile
*f
, bool postcopy
)
1019 trace_savevm_state_iterate();
1020 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1021 if (!se
->ops
|| !se
->ops
->save_live_iterate
) {
1024 if (se
->ops
&& se
->ops
->is_active
) {
1025 if (!se
->ops
->is_active(se
->opaque
)) {
1030 * In the postcopy phase, any device that doesn't know how to
1031 * do postcopy should have saved it's state in the _complete
1032 * call that's already run, it might get confused if we call
1033 * iterate afterwards.
1036 !(se
->ops
->has_postcopy
&& se
->ops
->has_postcopy(se
->opaque
))) {
1039 if (qemu_file_rate_limit(f
)) {
1042 trace_savevm_section_start(se
->idstr
, se
->section_id
);
1044 save_section_header(f
, se
, QEMU_VM_SECTION_PART
);
1046 ret
= se
->ops
->save_live_iterate(f
, se
->opaque
);
1047 trace_savevm_section_end(se
->idstr
, se
->section_id
, ret
);
1048 save_section_footer(f
, se
);
1051 qemu_file_set_error(f
, ret
);
1054 /* Do not proceed to the next vmstate before this one reported
1055 completion of the current stage. This serializes the migration
1056 and reduces the probability that a faster changing state is
1057 synchronized over and over again. */
1064 static bool should_send_vmdesc(void)
1066 MachineState
*machine
= MACHINE(qdev_get_machine());
1067 bool in_postcopy
= migration_in_postcopy();
1068 return !machine
->suppress_vmdesc
&& !in_postcopy
;
1072 * Calls the save_live_complete_postcopy methods
1073 * causing the last few pages to be sent immediately and doing any associated
1075 * Note postcopy also calls qemu_savevm_state_complete_precopy to complete
1076 * all the other devices, but that happens at the point we switch to postcopy.
1078 void qemu_savevm_state_complete_postcopy(QEMUFile
*f
)
1083 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1084 if (!se
->ops
|| !se
->ops
->save_live_complete_postcopy
) {
1087 if (se
->ops
&& se
->ops
->is_active
) {
1088 if (!se
->ops
->is_active(se
->opaque
)) {
1092 trace_savevm_section_start(se
->idstr
, se
->section_id
);
1094 qemu_put_byte(f
, QEMU_VM_SECTION_END
);
1095 qemu_put_be32(f
, se
->section_id
);
1097 ret
= se
->ops
->save_live_complete_postcopy(f
, se
->opaque
);
1098 trace_savevm_section_end(se
->idstr
, se
->section_id
, ret
);
1099 save_section_footer(f
, se
);
1101 qemu_file_set_error(f
, ret
);
1106 qemu_put_byte(f
, QEMU_VM_EOF
);
1110 int qemu_savevm_state_complete_precopy(QEMUFile
*f
, bool iterable_only
,
1111 bool inactivate_disks
)
1117 bool in_postcopy
= migration_in_postcopy();
1119 trace_savevm_state_complete_precopy();
1121 cpu_synchronize_all_states();
1123 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1125 (in_postcopy
&& se
->ops
->has_postcopy
&&
1126 se
->ops
->has_postcopy(se
->opaque
)) ||
1127 (in_postcopy
&& !iterable_only
) ||
1128 !se
->ops
->save_live_complete_precopy
) {
1132 if (se
->ops
&& se
->ops
->is_active
) {
1133 if (!se
->ops
->is_active(se
->opaque
)) {
1137 trace_savevm_section_start(se
->idstr
, se
->section_id
);
1139 save_section_header(f
, se
, QEMU_VM_SECTION_END
);
1141 ret
= se
->ops
->save_live_complete_precopy(f
, se
->opaque
);
1142 trace_savevm_section_end(se
->idstr
, se
->section_id
, ret
);
1143 save_section_footer(f
, se
);
1145 qemu_file_set_error(f
, ret
);
1150 if (iterable_only
) {
1154 vmdesc
= qjson_new();
1155 json_prop_int(vmdesc
, "page_size", qemu_target_page_size());
1156 json_start_array(vmdesc
, "devices");
1157 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1159 if ((!se
->ops
|| !se
->ops
->save_state
) && !se
->vmsd
) {
1162 if (se
->vmsd
&& !vmstate_save_needed(se
->vmsd
, se
->opaque
)) {
1163 trace_savevm_section_skip(se
->idstr
, se
->section_id
);
1167 trace_savevm_section_start(se
->idstr
, se
->section_id
);
1169 json_start_object(vmdesc
, NULL
);
1170 json_prop_str(vmdesc
, "name", se
->idstr
);
1171 json_prop_int(vmdesc
, "instance_id", se
->instance_id
);
1173 save_section_header(f
, se
, QEMU_VM_SECTION_FULL
);
1174 ret
= vmstate_save(f
, se
, vmdesc
);
1176 qemu_file_set_error(f
, ret
);
1179 trace_savevm_section_end(se
->idstr
, se
->section_id
, 0);
1180 save_section_footer(f
, se
);
1182 json_end_object(vmdesc
);
1185 if (inactivate_disks
) {
1186 /* Inactivate before sending QEMU_VM_EOF so that the
1187 * bdrv_invalidate_cache_all() on the other end won't fail. */
1188 ret
= bdrv_inactivate_all();
1190 error_report("%s: bdrv_inactivate_all() failed (%d)",
1192 qemu_file_set_error(f
, ret
);
1197 /* Postcopy stream will still be going */
1198 qemu_put_byte(f
, QEMU_VM_EOF
);
1201 json_end_array(vmdesc
);
1202 qjson_finish(vmdesc
);
1203 vmdesc_len
= strlen(qjson_get_str(vmdesc
));
1205 if (should_send_vmdesc()) {
1206 qemu_put_byte(f
, QEMU_VM_VMDESCRIPTION
);
1207 qemu_put_be32(f
, vmdesc_len
);
1208 qemu_put_buffer(f
, (uint8_t *)qjson_get_str(vmdesc
), vmdesc_len
);
1210 qjson_destroy(vmdesc
);
1216 /* Give an estimate of the amount left to be transferred,
1217 * the result is split into the amount for units that can and
1218 * for units that can't do postcopy.
1220 void qemu_savevm_state_pending(QEMUFile
*f
, uint64_t threshold_size
,
1221 uint64_t *res_non_postcopiable
,
1222 uint64_t *res_postcopiable
)
1226 *res_non_postcopiable
= 0;
1227 *res_postcopiable
= 0;
1230 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1231 if (!se
->ops
|| !se
->ops
->save_live_pending
) {
1234 if (se
->ops
&& se
->ops
->is_active
) {
1235 if (!se
->ops
->is_active(se
->opaque
)) {
1239 se
->ops
->save_live_pending(f
, se
->opaque
, threshold_size
,
1240 res_non_postcopiable
, res_postcopiable
);
1244 void qemu_savevm_state_cleanup(void)
1248 trace_savevm_state_cleanup();
1249 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1250 if (se
->ops
&& se
->ops
->save_cleanup
) {
1251 se
->ops
->save_cleanup(se
->opaque
);
1256 static int qemu_savevm_state(QEMUFile
*f
, Error
**errp
)
1259 MigrationState
*ms
= migrate_init();
1260 MigrationStatus status
;
1261 ms
->to_dst_file
= f
;
1263 if (migration_is_blocked(errp
)) {
1268 if (migrate_use_block()) {
1269 error_setg(errp
, "Block migration and snapshots are incompatible");
1274 qemu_mutex_unlock_iothread();
1275 qemu_savevm_state_header(f
);
1276 qemu_savevm_state_setup(f
);
1277 qemu_mutex_lock_iothread();
1279 while (qemu_file_get_error(f
) == 0) {
1280 if (qemu_savevm_state_iterate(f
, false) > 0) {
1285 ret
= qemu_file_get_error(f
);
1287 qemu_savevm_state_complete_precopy(f
, false, false);
1288 ret
= qemu_file_get_error(f
);
1290 qemu_savevm_state_cleanup();
1292 error_setg_errno(errp
, -ret
, "Error while writing VM state");
1297 status
= MIGRATION_STATUS_FAILED
;
1299 status
= MIGRATION_STATUS_COMPLETED
;
1301 migrate_set_state(&ms
->state
, MIGRATION_STATUS_SETUP
, status
);
1303 /* f is outer parameter, it should not stay in global migration state after
1304 * this function finished */
1305 ms
->to_dst_file
= NULL
;
1310 static int qemu_save_device_state(QEMUFile
*f
)
1314 qemu_put_be32(f
, QEMU_VM_FILE_MAGIC
);
1315 qemu_put_be32(f
, QEMU_VM_FILE_VERSION
);
1317 cpu_synchronize_all_states();
1319 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1325 if ((!se
->ops
|| !se
->ops
->save_state
) && !se
->vmsd
) {
1328 if (se
->vmsd
&& !vmstate_save_needed(se
->vmsd
, se
->opaque
)) {
1332 save_section_header(f
, se
, QEMU_VM_SECTION_FULL
);
1334 ret
= vmstate_save(f
, se
, NULL
);
1339 save_section_footer(f
, se
);
1342 qemu_put_byte(f
, QEMU_VM_EOF
);
1344 return qemu_file_get_error(f
);
1347 static SaveStateEntry
*find_se(const char *idstr
, int instance_id
)
1351 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1352 if (!strcmp(se
->idstr
, idstr
) &&
1353 (instance_id
== se
->instance_id
||
1354 instance_id
== se
->alias_id
))
1356 /* Migrating from an older version? */
1357 if (strstr(se
->idstr
, idstr
) && se
->compat
) {
1358 if (!strcmp(se
->compat
->idstr
, idstr
) &&
1359 (instance_id
== se
->compat
->instance_id
||
1360 instance_id
== se
->alias_id
))
1367 enum LoadVMExitCodes
{
1368 /* Allow a command to quit all layers of nested loadvm loops */
1372 static int qemu_loadvm_state_main(QEMUFile
*f
, MigrationIncomingState
*mis
);
1374 /* ------ incoming postcopy messages ------ */
1375 /* 'advise' arrives before any transfers just to tell us that a postcopy
1376 * *might* happen - it might be skipped if precopy transferred everything
1379 static int loadvm_postcopy_handle_advise(MigrationIncomingState
*mis
)
1381 PostcopyState ps
= postcopy_state_set(POSTCOPY_INCOMING_ADVISE
);
1382 uint64_t remote_pagesize_summary
, local_pagesize_summary
, remote_tps
;
1384 trace_loadvm_postcopy_handle_advise();
1385 if (ps
!= POSTCOPY_INCOMING_NONE
) {
1386 error_report("CMD_POSTCOPY_ADVISE in wrong postcopy state (%d)", ps
);
1390 if (!migrate_postcopy_ram()) {
1394 if (!postcopy_ram_supported_by_host(mis
)) {
1395 postcopy_state_set(POSTCOPY_INCOMING_NONE
);
1399 remote_pagesize_summary
= qemu_get_be64(mis
->from_src_file
);
1400 local_pagesize_summary
= ram_pagesize_summary();
1402 if (remote_pagesize_summary
!= local_pagesize_summary
) {
1404 * This detects two potential causes of mismatch:
1405 * a) A mismatch in host page sizes
1406 * Some combinations of mismatch are probably possible but it gets
1407 * a bit more complicated. In particular we need to place whole
1408 * host pages on the dest at once, and we need to ensure that we
1409 * handle dirtying to make sure we never end up sending part of
1410 * a hostpage on it's own.
1411 * b) The use of different huge page sizes on source/destination
1412 * a more fine grain test is performed during RAM block migration
1413 * but this test here causes a nice early clear failure, and
1414 * also fails when passed to an older qemu that doesn't
1417 error_report("Postcopy needs matching RAM page sizes (s=%" PRIx64
1419 remote_pagesize_summary
, local_pagesize_summary
);
1423 remote_tps
= qemu_get_be64(mis
->from_src_file
);
1424 if (remote_tps
!= qemu_target_page_size()) {
1426 * Again, some differences could be dealt with, but for now keep it
1429 error_report("Postcopy needs matching target page sizes (s=%d d=%zd)",
1430 (int)remote_tps
, qemu_target_page_size());
1434 if (ram_postcopy_incoming_init(mis
)) {
1438 postcopy_state_set(POSTCOPY_INCOMING_ADVISE
);
1443 /* After postcopy we will be told to throw some pages away since they're
1444 * dirty and will have to be demand fetched. Must happen before CPU is
1446 * There can be 0..many of these messages, each encoding multiple pages.
1448 static int loadvm_postcopy_ram_handle_discard(MigrationIncomingState
*mis
,
1453 PostcopyState ps
= postcopy_state_get();
1455 trace_loadvm_postcopy_ram_handle_discard();
1458 case POSTCOPY_INCOMING_ADVISE
:
1460 tmp
= postcopy_ram_prepare_discard(mis
);
1466 case POSTCOPY_INCOMING_DISCARD
:
1467 /* Expected state */
1471 error_report("CMD_POSTCOPY_RAM_DISCARD in wrong postcopy state (%d)",
1475 /* We're expecting a
1477 * a RAM ID string (length byte, name, 0 term)
1478 * then at least 1 16 byte chunk
1480 if (len
< (1 + 1 + 1 + 1 + 2 * 8)) {
1481 error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len
);
1485 tmp
= qemu_get_byte(mis
->from_src_file
);
1486 if (tmp
!= postcopy_ram_discard_version
) {
1487 error_report("CMD_POSTCOPY_RAM_DISCARD invalid version (%d)", tmp
);
1491 if (!qemu_get_counted_string(mis
->from_src_file
, ramid
)) {
1492 error_report("CMD_POSTCOPY_RAM_DISCARD Failed to read RAMBlock ID");
1495 tmp
= qemu_get_byte(mis
->from_src_file
);
1497 error_report("CMD_POSTCOPY_RAM_DISCARD missing nil (%d)", tmp
);
1501 len
-= 3 + strlen(ramid
);
1503 error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len
);
1506 trace_loadvm_postcopy_ram_handle_discard_header(ramid
, len
);
1508 uint64_t start_addr
, block_length
;
1509 start_addr
= qemu_get_be64(mis
->from_src_file
);
1510 block_length
= qemu_get_be64(mis
->from_src_file
);
1513 int ret
= ram_discard_range(ramid
, start_addr
, block_length
);
1518 trace_loadvm_postcopy_ram_handle_discard_end();
1524 * Triggered by a postcopy_listen command; this thread takes over reading
1525 * the input stream, leaving the main thread free to carry on loading the rest
1526 * of the device state (from RAM).
1527 * (TODO:This could do with being in a postcopy file - but there again it's
1528 * just another input loop, not that postcopy specific)
1530 static void *postcopy_ram_listen_thread(void *opaque
)
1532 QEMUFile
*f
= opaque
;
1533 MigrationIncomingState
*mis
= migration_incoming_get_current();
1536 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
1537 MIGRATION_STATUS_POSTCOPY_ACTIVE
);
1538 qemu_sem_post(&mis
->listen_thread_sem
);
1539 trace_postcopy_ram_listen_thread_start();
1542 * Because we're a thread and not a coroutine we can't yield
1543 * in qemu_file, and thus we must be blocking now.
1545 qemu_file_set_blocking(f
, true);
1546 load_res
= qemu_loadvm_state_main(f
, mis
);
1547 /* And non-blocking again so we don't block in any cleanup */
1548 qemu_file_set_blocking(f
, false);
1550 trace_postcopy_ram_listen_thread_exit();
1552 error_report("%s: loadvm failed: %d", __func__
, load_res
);
1553 qemu_file_set_error(f
, load_res
);
1554 migrate_set_state(&mis
->state
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1555 MIGRATION_STATUS_FAILED
);
1558 * This looks good, but it's possible that the device loading in the
1559 * main thread hasn't finished yet, and so we might not be in 'RUN'
1560 * state yet; wait for the end of the main thread.
1562 qemu_event_wait(&mis
->main_thread_load_event
);
1564 postcopy_ram_incoming_cleanup(mis
);
1568 * If something went wrong then we have a bad state so exit;
1569 * depending how far we got it might be possible at this point
1570 * to leave the guest running and fire MCEs for pages that never
1571 * arrived as a desperate recovery step.
1576 migrate_set_state(&mis
->state
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1577 MIGRATION_STATUS_COMPLETED
);
1579 * If everything has worked fine, then the main thread has waited
1580 * for us to start, and we're the last use of the mis.
1581 * (If something broke then qemu will have to exit anyway since it's
1582 * got a bad migration state).
1584 migration_incoming_state_destroy();
1585 qemu_loadvm_state_cleanup();
1590 /* After this message we must be able to immediately receive postcopy data */
1591 static int loadvm_postcopy_handle_listen(MigrationIncomingState
*mis
)
1593 PostcopyState ps
= postcopy_state_set(POSTCOPY_INCOMING_LISTENING
);
1594 trace_loadvm_postcopy_handle_listen();
1595 if (ps
!= POSTCOPY_INCOMING_ADVISE
&& ps
!= POSTCOPY_INCOMING_DISCARD
) {
1596 error_report("CMD_POSTCOPY_LISTEN in wrong postcopy state (%d)", ps
);
1599 if (ps
== POSTCOPY_INCOMING_ADVISE
) {
1601 * A rare case, we entered listen without having to do any discards,
1602 * so do the setup that's normally done at the time of the 1st discard.
1604 if (migrate_postcopy_ram()) {
1605 postcopy_ram_prepare_discard(mis
);
1610 * Sensitise RAM - can now generate requests for blocks that don't exist
1611 * However, at this point the CPU shouldn't be running, and the IO
1612 * shouldn't be doing anything yet so don't actually expect requests
1614 if (migrate_postcopy_ram()) {
1615 if (postcopy_ram_enable_notify(mis
)) {
1620 if (mis
->have_listen_thread
) {
1621 error_report("CMD_POSTCOPY_RAM_LISTEN already has a listen thread");
1625 mis
->have_listen_thread
= true;
1626 /* Start up the listening thread and wait for it to signal ready */
1627 qemu_sem_init(&mis
->listen_thread_sem
, 0);
1628 qemu_thread_create(&mis
->listen_thread
, "postcopy/listen",
1629 postcopy_ram_listen_thread
, mis
->from_src_file
,
1630 QEMU_THREAD_DETACHED
);
1631 qemu_sem_wait(&mis
->listen_thread_sem
);
1632 qemu_sem_destroy(&mis
->listen_thread_sem
);
1642 static void loadvm_postcopy_handle_run_bh(void *opaque
)
1644 Error
*local_err
= NULL
;
1645 HandleRunBhData
*data
= opaque
;
1647 /* TODO we should move all of this lot into postcopy_ram.c or a shared code
1650 cpu_synchronize_all_post_init();
1652 qemu_announce_self();
1654 /* Make sure all file formats flush their mutable metadata.
1655 * If we get an error here, just don't restart the VM yet. */
1656 bdrv_invalidate_cache_all(&local_err
);
1658 error_report_err(local_err
);
1663 trace_loadvm_postcopy_handle_run_cpu_sync();
1664 cpu_synchronize_all_post_init();
1666 trace_loadvm_postcopy_handle_run_vmstart();
1669 /* Hold onto your hats, starting the CPU */
1672 /* leave it paused and let management decide when to start the CPU */
1673 runstate_set(RUN_STATE_PAUSED
);
1676 qemu_bh_delete(data
->bh
);
1680 /* After all discards we can start running and asking for pages */
1681 static int loadvm_postcopy_handle_run(MigrationIncomingState
*mis
)
1683 PostcopyState ps
= postcopy_state_set(POSTCOPY_INCOMING_RUNNING
);
1684 HandleRunBhData
*data
;
1686 trace_loadvm_postcopy_handle_run();
1687 if (ps
!= POSTCOPY_INCOMING_LISTENING
) {
1688 error_report("CMD_POSTCOPY_RUN in wrong postcopy state (%d)", ps
);
1692 data
= g_new(HandleRunBhData
, 1);
1693 data
->bh
= qemu_bh_new(loadvm_postcopy_handle_run_bh
, data
);
1694 qemu_bh_schedule(data
->bh
);
1696 /* We need to finish reading the stream from the package
1697 * and also stop reading anything more from the stream that loaded the
1698 * package (since it's now being read by the listener thread).
1699 * LOADVM_QUIT will quit all the layers of nested loadvm loops.
1705 * Immediately following this command is a blob of data containing an embedded
1706 * chunk of migration stream; read it and load it.
1708 * @mis: Incoming state
1709 * @length: Length of packaged data to read
1711 * Returns: Negative values on error
1714 static int loadvm_handle_cmd_packaged(MigrationIncomingState
*mis
)
1718 QIOChannelBuffer
*bioc
;
1720 length
= qemu_get_be32(mis
->from_src_file
);
1721 trace_loadvm_handle_cmd_packaged(length
);
1723 if (length
> MAX_VM_CMD_PACKAGED_SIZE
) {
1724 error_report("Unreasonably large packaged state: %zu", length
);
1728 bioc
= qio_channel_buffer_new(length
);
1729 qio_channel_set_name(QIO_CHANNEL(bioc
), "migration-loadvm-buffer");
1730 ret
= qemu_get_buffer(mis
->from_src_file
,
1733 if (ret
!= length
) {
1734 object_unref(OBJECT(bioc
));
1735 error_report("CMD_PACKAGED: Buffer receive fail ret=%d length=%zu",
1737 return (ret
< 0) ? ret
: -EAGAIN
;
1739 bioc
->usage
+= length
;
1740 trace_loadvm_handle_cmd_packaged_received(ret
);
1742 QEMUFile
*packf
= qemu_fopen_channel_input(QIO_CHANNEL(bioc
));
1744 ret
= qemu_loadvm_state_main(packf
, mis
);
1745 trace_loadvm_handle_cmd_packaged_main(ret
);
1747 object_unref(OBJECT(bioc
));
1753 * Process an incoming 'QEMU_VM_COMMAND'
1754 * 0 just a normal return
1755 * LOADVM_QUIT All good, but exit the loop
1758 static int loadvm_process_command(QEMUFile
*f
)
1760 MigrationIncomingState
*mis
= migration_incoming_get_current();
1765 cmd
= qemu_get_be16(f
);
1766 len
= qemu_get_be16(f
);
1768 trace_loadvm_process_command(cmd
, len
);
1769 if (cmd
>= MIG_CMD_MAX
|| cmd
== MIG_CMD_INVALID
) {
1770 error_report("MIG_CMD 0x%x unknown (len 0x%x)", cmd
, len
);
1774 if (mig_cmd_args
[cmd
].len
!= -1 && mig_cmd_args
[cmd
].len
!= len
) {
1775 error_report("%s received with bad length - expecting %zu, got %d",
1776 mig_cmd_args
[cmd
].name
,
1777 (size_t)mig_cmd_args
[cmd
].len
, len
);
1782 case MIG_CMD_OPEN_RETURN_PATH
:
1783 if (mis
->to_src_file
) {
1784 error_report("CMD_OPEN_RETURN_PATH called when RP already open");
1785 /* Not really a problem, so don't give up */
1788 mis
->to_src_file
= qemu_file_get_return_path(f
);
1789 if (!mis
->to_src_file
) {
1790 error_report("CMD_OPEN_RETURN_PATH failed");
1796 tmp32
= qemu_get_be32(f
);
1797 trace_loadvm_process_command_ping(tmp32
);
1798 if (!mis
->to_src_file
) {
1799 error_report("CMD_PING (0x%x) received with no return path",
1803 migrate_send_rp_pong(mis
, tmp32
);
1806 case MIG_CMD_PACKAGED
:
1807 return loadvm_handle_cmd_packaged(mis
);
1809 case MIG_CMD_POSTCOPY_ADVISE
:
1810 return loadvm_postcopy_handle_advise(mis
);
1812 case MIG_CMD_POSTCOPY_LISTEN
:
1813 return loadvm_postcopy_handle_listen(mis
);
1815 case MIG_CMD_POSTCOPY_RUN
:
1816 return loadvm_postcopy_handle_run(mis
);
1818 case MIG_CMD_POSTCOPY_RAM_DISCARD
:
1819 return loadvm_postcopy_ram_handle_discard(mis
, len
);
1826 * Read a footer off the wire and check that it matches the expected section
1828 * Returns: true if the footer was good
1829 * false if there is a problem (and calls error_report to say why)
1831 static bool check_section_footer(QEMUFile
*f
, SaveStateEntry
*se
)
1834 uint32_t read_section_id
;
1836 if (!migrate_get_current()->send_section_footer
) {
1837 /* No footer to check */
1841 read_mark
= qemu_get_byte(f
);
1843 if (read_mark
!= QEMU_VM_SECTION_FOOTER
) {
1844 error_report("Missing section footer for %s", se
->idstr
);
1848 read_section_id
= qemu_get_be32(f
);
1849 if (read_section_id
!= se
->load_section_id
) {
1850 error_report("Mismatched section id in footer for %s -"
1851 " read 0x%x expected 0x%x",
1852 se
->idstr
, read_section_id
, se
->load_section_id
);
1861 qemu_loadvm_section_start_full(QEMUFile
*f
, MigrationIncomingState
*mis
)
1863 uint32_t instance_id
, version_id
, section_id
;
1868 /* Read section start */
1869 section_id
= qemu_get_be32(f
);
1870 if (!qemu_get_counted_string(f
, idstr
)) {
1871 error_report("Unable to read ID string for section %u",
1875 instance_id
= qemu_get_be32(f
);
1876 version_id
= qemu_get_be32(f
);
1878 trace_qemu_loadvm_state_section_startfull(section_id
, idstr
,
1879 instance_id
, version_id
);
1880 /* Find savevm section */
1881 se
= find_se(idstr
, instance_id
);
1883 error_report("Unknown savevm section or instance '%s' %d",
1884 idstr
, instance_id
);
1888 /* Validate version */
1889 if (version_id
> se
->version_id
) {
1890 error_report("savevm: unsupported version %d for '%s' v%d",
1891 version_id
, idstr
, se
->version_id
);
1894 se
->load_version_id
= version_id
;
1895 se
->load_section_id
= section_id
;
1897 /* Validate if it is a device's state */
1898 if (xen_enabled() && se
->is_ram
) {
1899 error_report("loadvm: %s RAM loading not allowed on Xen", idstr
);
1903 ret
= vmstate_load(f
, se
);
1905 error_report("error while loading state for instance 0x%x of"
1906 " device '%s'", instance_id
, idstr
);
1909 if (!check_section_footer(f
, se
)) {
1917 qemu_loadvm_section_part_end(QEMUFile
*f
, MigrationIncomingState
*mis
)
1919 uint32_t section_id
;
1923 section_id
= qemu_get_be32(f
);
1925 trace_qemu_loadvm_state_section_partend(section_id
);
1926 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1927 if (se
->load_section_id
== section_id
) {
1932 error_report("Unknown savevm section %d", section_id
);
1936 ret
= vmstate_load(f
, se
);
1938 error_report("error while loading state section id %d(%s)",
1939 section_id
, se
->idstr
);
1942 if (!check_section_footer(f
, se
)) {
1949 static int qemu_loadvm_state_setup(QEMUFile
*f
)
1954 trace_loadvm_state_setup();
1955 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1956 if (!se
->ops
|| !se
->ops
->load_setup
) {
1959 if (se
->ops
&& se
->ops
->is_active
) {
1960 if (!se
->ops
->is_active(se
->opaque
)) {
1965 ret
= se
->ops
->load_setup(f
, se
->opaque
);
1967 qemu_file_set_error(f
, ret
);
1968 error_report("Load state of device %s failed", se
->idstr
);
1975 void qemu_loadvm_state_cleanup(void)
1979 trace_loadvm_state_cleanup();
1980 QTAILQ_FOREACH(se
, &savevm_state
.handlers
, entry
) {
1981 if (se
->ops
&& se
->ops
->load_cleanup
) {
1982 se
->ops
->load_cleanup(se
->opaque
);
1987 static int qemu_loadvm_state_main(QEMUFile
*f
, MigrationIncomingState
*mis
)
1989 uint8_t section_type
;
1992 while ((section_type
= qemu_get_byte(f
)) != QEMU_VM_EOF
) {
1994 trace_qemu_loadvm_state_section(section_type
);
1995 switch (section_type
) {
1996 case QEMU_VM_SECTION_START
:
1997 case QEMU_VM_SECTION_FULL
:
1998 ret
= qemu_loadvm_section_start_full(f
, mis
);
2003 case QEMU_VM_SECTION_PART
:
2004 case QEMU_VM_SECTION_END
:
2005 ret
= qemu_loadvm_section_part_end(f
, mis
);
2010 case QEMU_VM_COMMAND
:
2011 ret
= loadvm_process_command(f
);
2012 trace_qemu_loadvm_state_section_command(ret
);
2013 if ((ret
< 0) || (ret
& LOADVM_QUIT
)) {
2018 error_report("Unknown savevm section type %d", section_type
);
2026 qemu_file_set_error(f
, ret
);
2031 int qemu_loadvm_state(QEMUFile
*f
)
2033 MigrationIncomingState
*mis
= migration_incoming_get_current();
2034 Error
*local_err
= NULL
;
2038 if (qemu_savevm_state_blocked(&local_err
)) {
2039 error_report_err(local_err
);
2043 v
= qemu_get_be32(f
);
2044 if (v
!= QEMU_VM_FILE_MAGIC
) {
2045 error_report("Not a migration stream");
2049 v
= qemu_get_be32(f
);
2050 if (v
== QEMU_VM_FILE_VERSION_COMPAT
) {
2051 error_report("SaveVM v2 format is obsolete and don't work anymore");
2054 if (v
!= QEMU_VM_FILE_VERSION
) {
2055 error_report("Unsupported migration stream version");
2059 if (qemu_loadvm_state_setup(f
) != 0) {
2063 if (migrate_get_current()->send_configuration
) {
2064 if (qemu_get_byte(f
) != QEMU_VM_CONFIGURATION
) {
2065 error_report("Configuration section missing");
2068 ret
= vmstate_load_state(f
, &vmstate_configuration
, &savevm_state
, 0);
2075 cpu_synchronize_all_pre_loadvm();
2077 ret
= qemu_loadvm_state_main(f
, mis
);
2078 qemu_event_set(&mis
->main_thread_load_event
);
2080 trace_qemu_loadvm_state_post_main(ret
);
2082 if (mis
->have_listen_thread
) {
2083 /* Listen thread still going, can't clean up yet */
2088 ret
= qemu_file_get_error(f
);
2092 * Try to read in the VMDESC section as well, so that dumping tools that
2093 * intercept our migration stream have the chance to see it.
2096 /* We've got to be careful; if we don't read the data and just shut the fd
2097 * then the sender can error if we close while it's still sending.
2098 * We also mustn't read data that isn't there; some transports (RDMA)
2099 * will stall waiting for that data when the source has already closed.
2101 if (ret
== 0 && should_send_vmdesc()) {
2104 uint8_t section_type
= qemu_get_byte(f
);
2106 if (section_type
!= QEMU_VM_VMDESCRIPTION
) {
2107 error_report("Expected vmdescription section, but got %d",
2110 * It doesn't seem worth failing at this point since
2111 * we apparently have an otherwise valid VM state
2114 buf
= g_malloc(0x1000);
2115 size
= qemu_get_be32(f
);
2118 uint32_t read_chunk
= MIN(size
, 0x1000);
2119 qemu_get_buffer(f
, buf
, read_chunk
);
2126 qemu_loadvm_state_cleanup();
2127 cpu_synchronize_all_post_init();
2132 int save_snapshot(const char *name
, Error
**errp
)
2134 BlockDriverState
*bs
, *bs1
;
2135 QEMUSnapshotInfo sn1
, *sn
= &sn1
, old_sn1
, *old_sn
= &old_sn1
;
2138 int saved_vm_running
;
2139 uint64_t vm_state_size
;
2142 AioContext
*aio_context
;
2144 if (!bdrv_all_can_snapshot(&bs
)) {
2145 error_setg(errp
, "Device '%s' is writable but does not support "
2146 "snapshots", bdrv_get_device_name(bs
));
2150 /* Delete old snapshots of the same name */
2152 ret
= bdrv_all_delete_snapshot(name
, &bs1
, errp
);
2154 error_prepend(errp
, "Error while deleting snapshot on device "
2155 "'%s': ", bdrv_get_device_name(bs1
));
2160 bs
= bdrv_all_find_vmstate_bs();
2162 error_setg(errp
, "No block device can accept snapshots");
2165 aio_context
= bdrv_get_aio_context(bs
);
2167 saved_vm_running
= runstate_is_running();
2169 ret
= global_state_store();
2171 error_setg(errp
, "Error saving global state");
2174 vm_stop(RUN_STATE_SAVE_VM
);
2176 bdrv_drain_all_begin();
2178 aio_context_acquire(aio_context
);
2180 memset(sn
, 0, sizeof(*sn
));
2182 /* fill auxiliary fields */
2183 qemu_gettimeofday(&tv
);
2184 sn
->date_sec
= tv
.tv_sec
;
2185 sn
->date_nsec
= tv
.tv_usec
* 1000;
2186 sn
->vm_clock_nsec
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
);
2189 ret
= bdrv_snapshot_find(bs
, old_sn
, name
);
2191 pstrcpy(sn
->name
, sizeof(sn
->name
), old_sn
->name
);
2192 pstrcpy(sn
->id_str
, sizeof(sn
->id_str
), old_sn
->id_str
);
2194 pstrcpy(sn
->name
, sizeof(sn
->name
), name
);
2197 /* cast below needed for OpenBSD where tv_sec is still 'long' */
2198 localtime_r((const time_t *)&tv
.tv_sec
, &tm
);
2199 strftime(sn
->name
, sizeof(sn
->name
), "vm-%Y%m%d%H%M%S", &tm
);
2202 /* save the VM state */
2203 f
= qemu_fopen_bdrv(bs
, 1);
2205 error_setg(errp
, "Could not open VM state file");
2208 ret
= qemu_savevm_state(f
, errp
);
2209 vm_state_size
= qemu_ftell(f
);
2215 /* The bdrv_all_create_snapshot() call that follows acquires the AioContext
2216 * for itself. BDRV_POLL_WHILE() does not support nested locking because
2217 * it only releases the lock once. Therefore synchronous I/O will deadlock
2218 * unless we release the AioContext before bdrv_all_create_snapshot().
2220 aio_context_release(aio_context
);
2223 ret
= bdrv_all_create_snapshot(sn
, bs
, vm_state_size
, &bs
);
2225 error_setg(errp
, "Error while creating snapshot on '%s'",
2226 bdrv_get_device_name(bs
));
2234 aio_context_release(aio_context
);
2237 bdrv_drain_all_end();
2239 if (saved_vm_running
) {
2245 void qmp_xen_save_devices_state(const char *filename
, bool has_live
, bool live
,
2249 QIOChannelFile
*ioc
;
2250 int saved_vm_running
;
2254 /* live default to true so old version of Xen tool stack can have a
2255 * successfull live migration */
2259 saved_vm_running
= runstate_is_running();
2260 vm_stop(RUN_STATE_SAVE_VM
);
2261 global_state_store_running();
2263 ioc
= qio_channel_file_new_path(filename
, O_WRONLY
| O_CREAT
, 0660, errp
);
2267 qio_channel_set_name(QIO_CHANNEL(ioc
), "migration-xen-save-state");
2268 f
= qemu_fopen_channel_output(QIO_CHANNEL(ioc
));
2269 ret
= qemu_save_device_state(f
);
2272 error_setg(errp
, QERR_IO_ERROR
);
2274 /* libxl calls the QMP command "stop" before calling
2275 * "xen-save-devices-state" and in case of migration failure, libxl
2276 * would call "cont".
2277 * So call bdrv_inactivate_all (release locks) here to let the other
2278 * side of the migration take controle of the images.
2280 if (live
&& !saved_vm_running
) {
2281 ret
= bdrv_inactivate_all();
2283 error_setg(errp
, "%s: bdrv_inactivate_all() failed (%d)",
2290 if (saved_vm_running
) {
2295 void qmp_xen_load_devices_state(const char *filename
, Error
**errp
)
2298 QIOChannelFile
*ioc
;
2301 /* Guest must be paused before loading the device state; the RAM state
2302 * will already have been loaded by xc
2304 if (runstate_is_running()) {
2305 error_setg(errp
, "Cannot update device state while vm is running");
2308 vm_stop(RUN_STATE_RESTORE_VM
);
2310 ioc
= qio_channel_file_new_path(filename
, O_RDONLY
| O_BINARY
, 0, errp
);
2314 qio_channel_set_name(QIO_CHANNEL(ioc
), "migration-xen-load-state");
2315 f
= qemu_fopen_channel_input(QIO_CHANNEL(ioc
));
2317 ret
= qemu_loadvm_state(f
);
2320 error_setg(errp
, QERR_IO_ERROR
);
2322 migration_incoming_state_destroy();
2325 int load_snapshot(const char *name
, Error
**errp
)
2327 BlockDriverState
*bs
, *bs_vm_state
;
2328 QEMUSnapshotInfo sn
;
2331 AioContext
*aio_context
;
2332 MigrationIncomingState
*mis
= migration_incoming_get_current();
2334 if (!bdrv_all_can_snapshot(&bs
)) {
2336 "Device '%s' is writable but does not support snapshots",
2337 bdrv_get_device_name(bs
));
2340 ret
= bdrv_all_find_snapshot(name
, &bs
);
2343 "Device '%s' does not have the requested snapshot '%s'",
2344 bdrv_get_device_name(bs
), name
);
2348 bs_vm_state
= bdrv_all_find_vmstate_bs();
2350 error_setg(errp
, "No block device supports snapshots");
2353 aio_context
= bdrv_get_aio_context(bs_vm_state
);
2355 /* Don't even try to load empty VM states */
2356 aio_context_acquire(aio_context
);
2357 ret
= bdrv_snapshot_find(bs_vm_state
, &sn
, name
);
2358 aio_context_release(aio_context
);
2361 } else if (sn
.vm_state_size
== 0) {
2362 error_setg(errp
, "This is a disk-only snapshot. Revert to it "
2363 " offline using qemu-img");
2367 /* Flush all IO requests so they don't interfere with the new state. */
2368 bdrv_drain_all_begin();
2370 ret
= bdrv_all_goto_snapshot(name
, &bs
, errp
);
2372 error_prepend(errp
, "Could not load snapshot '%s' on '%s': ",
2373 name
, bdrv_get_device_name(bs
));
2377 /* restore the VM state */
2378 f
= qemu_fopen_bdrv(bs_vm_state
, 0);
2380 error_setg(errp
, "Could not open VM state file");
2385 qemu_system_reset(SHUTDOWN_CAUSE_NONE
);
2386 mis
->from_src_file
= f
;
2388 aio_context_acquire(aio_context
);
2389 ret
= qemu_loadvm_state(f
);
2390 migration_incoming_state_destroy();
2391 aio_context_release(aio_context
);
2393 bdrv_drain_all_end();
2396 error_setg(errp
, "Error %d while loading VM state", ret
);
2403 bdrv_drain_all_end();
2407 void vmstate_register_ram(MemoryRegion
*mr
, DeviceState
*dev
)
2409 qemu_ram_set_idstr(mr
->ram_block
,
2410 memory_region_name(mr
), dev
);
2413 void vmstate_unregister_ram(MemoryRegion
*mr
, DeviceState
*dev
)
2415 qemu_ram_unset_idstr(mr
->ram_block
);
2418 void vmstate_register_ram_global(MemoryRegion
*mr
)
2420 vmstate_register_ram(mr
, NULL
);
2423 bool vmstate_check_only_migratable(const VMStateDescription
*vmsd
)
2425 /* check needed if --only-migratable is specified */
2426 if (!migrate_get_current()->only_migratable
) {
2430 return !(vmsd
&& vmsd
->unmigratable
);