hw: Trim superfluous #include "block_int.h"
[qemu/ar7.git] / hw / ide / piix.c
blob88d318127c534e03d24e45dfe00cd867782c52aa
1 /*
2 * QEMU IDE Emulation: PCI PIIX3/4 support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
25 #include <hw/hw.h>
26 #include <hw/pc.h>
27 #include <hw/pci.h>
28 #include <hw/isa.h>
29 #include "block.h"
30 #include "sysemu.h"
31 #include "dma.h"
33 #include <hw/ide/pci.h>
35 static uint64_t bmdma_read(void *opaque, target_phys_addr_t addr, unsigned size)
37 BMDMAState *bm = opaque;
38 uint32_t val;
40 if (size != 1) {
41 return ((uint64_t)1 << (size * 8)) - 1;
44 switch(addr & 3) {
45 case 0:
46 val = bm->cmd;
47 break;
48 case 2:
49 val = bm->status;
50 break;
51 default:
52 val = 0xff;
53 break;
55 #ifdef DEBUG_IDE
56 printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
57 #endif
58 return val;
61 static void bmdma_write(void *opaque, target_phys_addr_t addr,
62 uint64_t val, unsigned size)
64 BMDMAState *bm = opaque;
66 if (size != 1) {
67 return;
70 #ifdef DEBUG_IDE
71 printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
72 #endif
73 switch(addr & 3) {
74 case 0:
75 return bmdma_cmd_writeb(bm, val);
76 case 2:
77 bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
78 break;
82 static MemoryRegionOps piix_bmdma_ops = {
83 .read = bmdma_read,
84 .write = bmdma_write,
87 static void bmdma_setup_bar(PCIIDEState *d)
89 int i;
91 memory_region_init(&d->bmdma_bar, "piix-bmdma-container", 16);
92 for(i = 0;i < 2; i++) {
93 BMDMAState *bm = &d->bmdma[i];
95 memory_region_init_io(&bm->extra_io, &piix_bmdma_ops, bm,
96 "piix-bmdma", 4);
97 memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
98 memory_region_init_io(&bm->addr_ioport, &bmdma_addr_ioport_ops, bm,
99 "bmdma", 4);
100 memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
104 static void piix3_reset(void *opaque)
106 PCIIDEState *d = opaque;
107 uint8_t *pci_conf = d->dev.config;
108 int i;
110 for (i = 0; i < 2; i++) {
111 ide_bus_reset(&d->bus[i]);
114 /* TODO: this is the default. do not override. */
115 pci_conf[PCI_COMMAND] = 0x00;
116 /* TODO: this is the default. do not override. */
117 pci_conf[PCI_COMMAND + 1] = 0x00;
118 /* TODO: use pci_set_word */
119 pci_conf[PCI_STATUS] = PCI_STATUS_FAST_BACK;
120 pci_conf[PCI_STATUS + 1] = PCI_STATUS_DEVSEL_MEDIUM >> 8;
121 pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
124 static void pci_piix_init_ports(PCIIDEState *d) {
125 int i;
126 struct {
127 int iobase;
128 int iobase2;
129 int isairq;
130 } port_info[] = {
131 {0x1f0, 0x3f6, 14},
132 {0x170, 0x376, 15},
135 for (i = 0; i < 2; i++) {
136 ide_bus_new(&d->bus[i], &d->dev.qdev, i);
137 ide_init_ioport(&d->bus[i], port_info[i].iobase, port_info[i].iobase2);
138 ide_init2(&d->bus[i], isa_get_irq(port_info[i].isairq));
140 bmdma_init(&d->bus[i], &d->bmdma[i], d);
141 d->bmdma[i].bus = &d->bus[i];
142 qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
143 &d->bmdma[i].dma);
147 static int pci_piix_ide_initfn(PCIDevice *dev)
149 PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
150 uint8_t *pci_conf = d->dev.config;
152 pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode
154 qemu_register_reset(piix3_reset, d);
156 bmdma_setup_bar(d);
157 pci_register_bar(&d->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
159 vmstate_register(&d->dev.qdev, 0, &vmstate_ide_pci, d);
161 pci_piix_init_ports(d);
163 return 0;
166 static int pci_piix3_xen_ide_unplug(DeviceState *dev)
168 PCIDevice *pci_dev;
169 PCIIDEState *pci_ide;
170 DriveInfo *di;
171 int i = 0;
173 pci_dev = DO_UPCAST(PCIDevice, qdev, dev);
174 pci_ide = DO_UPCAST(PCIIDEState, dev, pci_dev);
176 for (; i < 3; i++) {
177 di = drive_get_by_index(IF_IDE, i);
178 if (di != NULL && !di->media_cd) {
179 DeviceState *ds = bdrv_get_attached_dev(di->bdrv);
180 if (ds) {
181 bdrv_detach_dev(di->bdrv, ds);
183 bdrv_close(di->bdrv);
184 pci_ide->bus[di->bus].ifs[di->unit].bs = NULL;
185 drive_put_ref(di);
188 qdev_reset_all(&(pci_ide->dev.qdev));
189 return 0;
192 PCIDevice *pci_piix3_xen_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
194 PCIDevice *dev;
196 dev = pci_create_simple(bus, devfn, "piix3-ide-xen");
197 dev->qdev.info->unplug = pci_piix3_xen_ide_unplug;
198 pci_ide_create_devs(dev, hd_table);
199 return dev;
202 static int pci_piix_ide_exitfn(PCIDevice *dev)
204 PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
205 unsigned i;
207 for (i = 0; i < 2; ++i) {
208 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
209 memory_region_destroy(&d->bmdma[i].extra_io);
210 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
211 memory_region_destroy(&d->bmdma[i].addr_ioport);
213 memory_region_destroy(&d->bmdma_bar);
215 return 0;
218 /* hd_table must contain 4 block drivers */
219 /* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
220 PCIDevice *pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
222 PCIDevice *dev;
224 dev = pci_create_simple(bus, devfn, "piix3-ide");
225 pci_ide_create_devs(dev, hd_table);
226 return dev;
229 /* hd_table must contain 4 block drivers */
230 /* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
231 PCIDevice *pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
233 PCIDevice *dev;
235 dev = pci_create_simple(bus, devfn, "piix4-ide");
236 pci_ide_create_devs(dev, hd_table);
237 return dev;
240 static PCIDeviceInfo piix_ide_info[] = {
242 .qdev.name = "piix3-ide",
243 .qdev.size = sizeof(PCIIDEState),
244 .qdev.no_user = 1,
245 .no_hotplug = 1,
246 .init = pci_piix_ide_initfn,
247 .exit = pci_piix_ide_exitfn,
248 .vendor_id = PCI_VENDOR_ID_INTEL,
249 .device_id = PCI_DEVICE_ID_INTEL_82371SB_1,
250 .class_id = PCI_CLASS_STORAGE_IDE,
252 .qdev.name = "piix3-ide-xen",
253 .qdev.size = sizeof(PCIIDEState),
254 .qdev.no_user = 1,
255 .init = pci_piix_ide_initfn,
256 .vendor_id = PCI_VENDOR_ID_INTEL,
257 .device_id = PCI_DEVICE_ID_INTEL_82371SB_1,
258 .class_id = PCI_CLASS_STORAGE_IDE,
260 .qdev.name = "piix4-ide",
261 .qdev.size = sizeof(PCIIDEState),
262 .qdev.no_user = 1,
263 .no_hotplug = 1,
264 .init = pci_piix_ide_initfn,
265 .exit = pci_piix_ide_exitfn,
266 .vendor_id = PCI_VENDOR_ID_INTEL,
267 .device_id = PCI_DEVICE_ID_INTEL_82371AB,
268 .class_id = PCI_CLASS_STORAGE_IDE,
270 /* end of list */
274 static void piix_ide_register(void)
276 pci_qdev_register_many(piix_ide_info);
278 device_init(piix_ide_register);