?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
libqos: move useful qos-test funcs to qos_external
[qemu/ar7.git] / hw / arm / nseries.c
blob3fd196fb30b8a6d618018ea35a0fb0d9871ef646
1 /*
2 * Nokia N-series internet tablets.
3 *
4 * Copyright (C) 2007 Nokia Corporation
5 * Written by Andrzej Zaborowski <andrew@openedhand.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 or
10 * (at your option) version 3 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21 #include "qemu/osdep.h"
22 #include "qapi/error.h"
23 #include "cpu.h"
24 #include "chardev/char.h"
25 #include "qemu/cutils.h"
26 #include "qemu/bswap.h"
27 #include "sysemu/reset.h"
28 #include "sysemu/runstate.h"
29 #include "sysemu/sysemu.h"
30 #include "hw/arm/omap.h"
31 #include "hw/arm/boot.h"
32 #include "hw/irq.h"
33 #include "ui/console.h"
34 #include "hw/boards.h"
35 #include "hw/i2c/i2c.h"
36 #include "hw/display/blizzard.h"
37 #include "hw/input/tsc2xxx.h"
38 #include "hw/misc/cbus.h"
39 #include "hw/misc/tmp105.h"
40 #include "hw/qdev-properties.h"
41 #include "hw/block/flash.h"
42 #include "hw/hw.h"
43 #include "hw/loader.h"
44 #include "hw/sysbus.h"
45 #include "qemu/log.h"
46 #include "exec/address-spaces.h"
47
48 /* Nokia N8x0 support */
49 struct n800_s {
50 MemoryRegion sdram;
51 struct omap_mpu_state_s *mpu;
52
53 struct rfbi_chip_s blizzard;
54 struct {
55 void *opaque;
56 uint32_t (*txrx)(void *opaque, uint32_t value, int len);
57 uWireSlave *chip;
58 } ts;
59
60 int keymap[0x80];
61 DeviceState *kbd;
62
63 DeviceState *usb;
64 void *retu;
65 void *tahvo;
66 DeviceState *nand;
67 };
68
69 /* GPIO pins */
70 #define N8X0_TUSB_ENABLE_GPIO 0
71 #define N800_MMC2_WP_GPIO 8
72 #define N800_UNKNOWN_GPIO0 9 /* out */
73 #define N810_MMC2_VIOSD_GPIO 9
74 #define N810_HEADSET_AMP_GPIO 10
75 #define N800_CAM_TURN_GPIO 12
76 #define N810_GPS_RESET_GPIO 12
77 #define N800_BLIZZARD_POWERDOWN_GPIO 15
78 #define N800_MMC1_WP_GPIO 23
79 #define N810_MMC2_VSD_GPIO 23
80 #define N8X0_ONENAND_GPIO 26
81 #define N810_BLIZZARD_RESET_GPIO 30
82 #define N800_UNKNOWN_GPIO2 53 /* out */
83 #define N8X0_TUSB_INT_GPIO 58
84 #define N8X0_BT_WKUP_GPIO 61
85 #define N8X0_STI_GPIO 62
86 #define N8X0_CBUS_SEL_GPIO 64
87 #define N8X0_CBUS_DAT_GPIO 65
88 #define N8X0_CBUS_CLK_GPIO 66
89 #define N8X0_WLAN_IRQ_GPIO 87
90 #define N8X0_BT_RESET_GPIO 92
91 #define N8X0_TEA5761_CS_GPIO 93
92 #define N800_UNKNOWN_GPIO 94
93 #define N810_TSC_RESET_GPIO 94
94 #define N800_CAM_ACT_GPIO 95
95 #define N810_GPS_WAKEUP_GPIO 95
96 #define N8X0_MMC_CS_GPIO 96
97 #define N8X0_WLAN_PWR_GPIO 97
98 #define N8X0_BT_HOST_WKUP_GPIO 98
99 #define N810_SPEAKER_AMP_GPIO 101
100 #define N810_KB_LOCK_GPIO 102
101 #define N800_TSC_TS_GPIO 103
102 #define N810_TSC_TS_GPIO 106
103 #define N8X0_HEADPHONE_GPIO 107
104 #define N8X0_RETU_GPIO 108
105 #define N800_TSC_KP_IRQ_GPIO 109
106 #define N810_KEYBOARD_GPIO 109
107 #define N800_BAT_COVER_GPIO 110
108 #define N810_SLIDE_GPIO 110
109 #define N8X0_TAHVO_GPIO 111
110 #define N800_UNKNOWN_GPIO4 112 /* out */
111 #define N810_SLEEPX_LED_GPIO 112
112 #define N800_TSC_RESET_GPIO 118 /* ? */
113 #define N810_AIC33_RESET_GPIO 118
114 #define N800_TSC_UNKNOWN_GPIO 119 /* out */
115 #define N8X0_TMP105_GPIO 125
116
117 /* Config */
118 #define BT_UART 0
119 #define XLDR_LL_UART 1
120
121 /* Addresses on the I2C bus 0 */
122 #define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */
123 #define N8X0_TCM825x_ADDR 0x29 /* Camera */
124 #define N810_LP5521_ADDR 0x32 /* LEDs */
125 #define N810_TSL2563_ADDR 0x3d /* Light sensor */
126 #define N810_LM8323_ADDR 0x45 /* Keyboard */
127 /* Addresses on the I2C bus 1 */
128 #define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */
129 #define N8X0_MENELAUS_ADDR 0x72 /* Power management */
130
131 /* Chipselects on GPMC NOR interface */
132 #define N8X0_ONENAND_CS 0
133 #define N8X0_USB_ASYNC_CS 1
134 #define N8X0_USB_SYNC_CS 4
135
136 #define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81
137
138 static void n800_mmc_cs_cb(void *opaque, int line, int level)
139 {
140 /* TODO: this seems to actually be connected to the menelaus, to
141 * which also both MMC slots connect. */
142 omap_mmc_enable((struct omap_mmc_s *) opaque, !level);
143 }
144
145 static void n8x0_gpio_setup(struct n800_s *s)
146 {
147 qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO,
148 qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0));
149 qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
150 }
151
152 #define MAEMO_CAL_HEADER(...) \
153 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \
154 __VA_ARGS__, \
155 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
156
157 static const uint8_t n8x0_cal_wlan_mac[] = {
158 MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c')
159 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3,
160 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00,
161 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00,
162 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00,
163 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00,
164 };
165
166 static const uint8_t n8x0_cal_bt_id[] = {
167 MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0)
168 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96,
169 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00,
170 N8X0_BD_ADDR,
171 };
172
173 static void n8x0_nand_setup(struct n800_s *s)
174 {
175 char *otp_region;
176 DriveInfo *dinfo;
177
178 s->nand = qdev_create(NULL, "onenand");
179 qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG);
180 /* Either 0x40 or 0x48 are OK for the device ID */
181 qdev_prop_set_uint16(s->nand, "device_id", 0x48);
182 qdev_prop_set_uint16(s->nand, "version_id", 0);
183 qdev_prop_set_int32(s->nand, "shift", 1);
184 dinfo = drive_get(IF_MTD, 0, 0);
185 if (dinfo) {
186 qdev_prop_set_drive(s->nand, "drive", blk_by_legacy_dinfo(dinfo),
187 &error_fatal);
188 }
189 qdev_init_nofail(s->nand);
190 sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0,
191 qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
192 omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
193 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0));
194 otp_region = onenand_raw_otp(s->nand);
195
196 memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac));
197 memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id));
198 /* XXX: in theory should also update the OOB for both pages */
199 }
200
201 static qemu_irq n8x0_system_powerdown;
202
203 static void n8x0_powerdown_req(Notifier *n, void *opaque)
204 {
205 qemu_irq_raise(n8x0_system_powerdown);
206 }
207
208 static Notifier n8x0_system_powerdown_notifier = {
209 .notify = n8x0_powerdown_req
210 };
211
212 static void n8x0_i2c_setup(struct n800_s *s)
213 {
214 DeviceState *dev;
215 qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
216 I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
217
218 /* Attach a menelaus PM chip */
219 dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR);
220 qdev_connect_gpio_out(dev, 3,
221 qdev_get_gpio_in(s->mpu->ih[0],
222 OMAP_INT_24XX_SYS_NIRQ));
223
224 n8x0_system_powerdown = qdev_get_gpio_in(dev, 3);
225 qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
226
227 /* Attach a TMP105 PM chip (A0 wired to ground) */
228 dev = i2c_create_slave(i2c, TYPE_TMP105, N8X0_TMP105_ADDR);
229 qdev_connect_gpio_out(dev, 0, tmp_irq);
230 }
231
232 /* Touchscreen and keypad controller */
233 static MouseTransformInfo n800_pointercal = {
234 .x = 800,
235 .y = 480,
236 .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
237 };
238
239 static MouseTransformInfo n810_pointercal = {
240 .x = 800,
241 .y = 480,
242 .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
243 };
244
245 #define RETU_KEYCODE 61 /* F3 */
246
247 static void n800_key_event(void *opaque, int keycode)
248 {
249 struct n800_s *s = (struct n800_s *) opaque;
250 int code = s->keymap[keycode & 0x7f];
251
252 if (code == -1) {
253 if ((keycode & 0x7f) == RETU_KEYCODE) {
254 retu_key_event(s->retu, !(keycode & 0x80));
255 }
256 return;
257 }
258
259 tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80));
260 }
261
262 static const int n800_keys[16] = {
263 -1,
264 72, /* Up */
265 63, /* Home (F5) */
266 -1,
267 75, /* Left */
268 28, /* Enter */
269 77, /* Right */
270 -1,
271 1, /* Cycle (ESC) */
272 80, /* Down */
273 62, /* Menu (F4) */
274 -1,
275 66, /* Zoom- (F8) */
276 64, /* FullScreen (F6) */
277 65, /* Zoom+ (F7) */
278 -1,
279 };
280
281 static void n800_tsc_kbd_setup(struct n800_s *s)
282 {
283 int i;
284
285 /* XXX: are the three pins inverted inside the chip between the
286 * tsc and the cpu (N4111)? */
287 qemu_irq penirq = NULL; /* NC */
288 qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
289 qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
290
291 s->ts.chip = tsc2301_init(penirq, kbirq, dav);
292 s->ts.opaque = s->ts.chip->opaque;
293 s->ts.txrx = tsc210x_txrx;
294
295 for (i = 0; i < 0x80; i++) {
296 s->keymap[i] = -1;
297 }
298 for (i = 0; i < 0x10; i++) {
299 if (n800_keys[i] >= 0) {
300 s->keymap[n800_keys[i]] = i;
301 }
302 }
303
304 qemu_add_kbd_event_handler(n800_key_event, s);
305
306 tsc210x_set_transform(s->ts.chip, &n800_pointercal);
307 }
308
309 static void n810_tsc_setup(struct n800_s *s)
310 {
311 qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
312
313 s->ts.opaque = tsc2005_init(pintdav);
314 s->ts.txrx = tsc2005_txrx;
315
316 tsc2005_set_transform(s->ts.opaque, &n810_pointercal);
317 }
318
319 /* N810 Keyboard controller */
320 static void n810_key_event(void *opaque, int keycode)
321 {
322 struct n800_s *s = (struct n800_s *) opaque;
323 int code = s->keymap[keycode & 0x7f];
324
325 if (code == -1) {
326 if ((keycode & 0x7f) == RETU_KEYCODE) {
327 retu_key_event(s->retu, !(keycode & 0x80));
328 }
329 return;
330 }
331
332 lm832x_key_event(s->kbd, code, !(keycode & 0x80));
333 }
334
335 #define M 0
336
337 static int n810_keys[0x80] = {
338 [0x01] = 16, /* Q */
339 [0x02] = 37, /* K */
340 [0x03] = 24, /* O */
341 [0x04] = 25, /* P */
342 [0x05] = 14, /* Backspace */
343 [0x06] = 30, /* A */
344 [0x07] = 31, /* S */
345 [0x08] = 32, /* D */
346 [0x09] = 33, /* F */
347 [0x0a] = 34, /* G */
348 [0x0b] = 35, /* H */
349 [0x0c] = 36, /* J */
350
351 [0x11] = 17, /* W */
352 [0x12] = 62, /* Menu (F4) */
353 [0x13] = 38, /* L */
354 [0x14] = 40, /* ' (Apostrophe) */
355 [0x16] = 44, /* Z */
356 [0x17] = 45, /* X */
357 [0x18] = 46, /* C */
358 [0x19] = 47, /* V */
359 [0x1a] = 48, /* B */
360 [0x1b] = 49, /* N */
361 [0x1c] = 42, /* Shift (Left shift) */
362 [0x1f] = 65, /* Zoom+ (F7) */
363
364 [0x21] = 18, /* E */
365 [0x22] = 39, /* ; (Semicolon) */
366 [0x23] = 12, /* - (Minus) */
367 [0x24] = 13, /* = (Equal) */
368 [0x2b] = 56, /* Fn (Left Alt) */
369 [0x2c] = 50, /* M */
370 [0x2f] = 66, /* Zoom- (F8) */
371
372 [0x31] = 19, /* R */
373 [0x32] = 29 | M, /* Right Ctrl */
374 [0x34] = 57, /* Space */
375 [0x35] = 51, /* , (Comma) */
376 [0x37] = 72 | M, /* Up */
377 [0x3c] = 82 | M, /* Compose (Insert) */
378 [0x3f] = 64, /* FullScreen (F6) */
379
380 [0x41] = 20, /* T */
381 [0x44] = 52, /* . (Dot) */
382 [0x46] = 77 | M, /* Right */
383 [0x4f] = 63, /* Home (F5) */
384 [0x51] = 21, /* Y */
385 [0x53] = 80 | M, /* Down */
386 [0x55] = 28, /* Enter */
387 [0x5f] = 1, /* Cycle (ESC) */
388
389 [0x61] = 22, /* U */
390 [0x64] = 75 | M, /* Left */
391
392 [0x71] = 23, /* I */
393 #if 0
394 [0x75] = 28 | M, /* KP Enter (KP Enter) */
395 #else
396 [0x75] = 15, /* KP Enter (Tab) */
397 #endif
398 };
399
400 #undef M
401
402 static void n810_kbd_setup(struct n800_s *s)
403 {
404 qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
405 int i;
406
407 for (i = 0; i < 0x80; i++) {
408 s->keymap[i] = -1;
409 }
410 for (i = 0; i < 0x80; i++) {
411 if (n810_keys[i] > 0) {
412 s->keymap[n810_keys[i]] = i;
413 }
414 }
415
416 qemu_add_kbd_event_handler(n810_key_event, s);
417
418 /* Attach the LM8322 keyboard to the I2C bus,
419 * should happen in n8x0_i2c_setup and s->kbd be initialised here. */
420 s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]),
421 "lm8323", N810_LM8323_ADDR);
422 qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
423 }
424
425 /* LCD MIPI DBI-C controller (URAL) */
426 struct mipid_s {
427 int resp[4];
428 int param[4];
429 int p;
430 int pm;
431 int cmd;
432
433 int sleep;
434 int booster;
435 int te;
436 int selfcheck;
437 int partial;
438 int normal;
439 int vscr;
440 int invert;
441 int onoff;
442 int gamma;
443 uint32_t id;
444 };
445
446 static void mipid_reset(struct mipid_s *s)
447 {
448 s->pm = 0;
449 s->cmd = 0;
450
451 s->sleep = 1;
452 s->booster = 0;
453 s->selfcheck =
454 (1 << 7) | /* Register loading OK. */
455 (1 << 5) | /* The chip is attached. */
456 (1 << 4); /* Display glass still in one piece. */
457 s->te = 0;
458 s->partial = 0;
459 s->normal = 1;
460 s->vscr = 0;
461 s->invert = 0;
462 s->onoff = 1;
463 s->gamma = 0;
464 }
465
466 static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
467 {
468 struct mipid_s *s = (struct mipid_s *) opaque;
469 uint8_t ret;
470
471 if (len > 9) {
472 hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len);
473 }
474
475 if (s->p >= ARRAY_SIZE(s->resp)) {
476 ret = 0;
477 } else {
478 ret = s->resp[s->p++];
479 }
480 if (s->pm-- > 0) {
481 s->param[s->pm] = cmd;
482 } else {
483 s->cmd = cmd;
484 }
485
486 switch (s->cmd) {
487 case 0x00: /* NOP */
488 break;
489
490 case 0x01: /* SWRESET */
491 mipid_reset(s);
492 break;
493
494 case 0x02: /* BSTROFF */
495 s->booster = 0;
496 break;
497 case 0x03: /* BSTRON */
498 s->booster = 1;
499 break;
500
501 case 0x04: /* RDDID */
502 s->p = 0;
503 s->resp[0] = (s->id >> 16) & 0xff;
504 s->resp[1] = (s->id >> 8) & 0xff;
505 s->resp[2] = (s->id >> 0) & 0xff;
506 break;
507
508 case 0x06: /* RD_RED */
509 case 0x07: /* RD_GREEN */
510 /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so
511 * for the bootloader one needs to change this. */
512 case 0x08: /* RD_BLUE */
513 s->p = 0;
514 /* TODO: return first pixel components */
515 s->resp[0] = 0x01;
516 break;
517
518 case 0x09: /* RDDST */
519 s->p = 0;
520 s->resp[0] = s->booster << 7;
521 s->resp[1] = (5 << 4) | (s->partial << 2) |
522 (s->sleep << 1) | s->normal;
523 s->resp[2] = (s->vscr << 7) | (s->invert << 5) |
524 (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2);
525 s->resp[3] = s->gamma << 6;
526 break;
527
528 case 0x0a: /* RDDPM */
529 s->p = 0;
530 s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) |
531 (s->partial << 5) | (s->sleep << 6) | (s->booster << 7);
532 break;
533 case 0x0b: /* RDDMADCTR */
534 s->p = 0;
535 s->resp[0] = 0;
536 break;
537 case 0x0c: /* RDDCOLMOD */
538 s->p = 0;
539 s->resp[0] = 5; /* 65K colours */
540 break;
541 case 0x0d: /* RDDIM */
542 s->p = 0;
543 s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma;
544 break;
545 case 0x0e: /* RDDSM */
546 s->p = 0;
547 s->resp[0] = s->te << 7;
548 break;
549 case 0x0f: /* RDDSDR */
550 s->p = 0;
551 s->resp[0] = s->selfcheck;
552 break;
553
554 case 0x10: /* SLPIN */
555 s->sleep = 1;
556 break;
557 case 0x11: /* SLPOUT */
558 s->sleep = 0;
559 s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */
560 break;
561
562 case 0x12: /* PTLON */
563 s->partial = 1;
564 s->normal = 0;
565 s->vscr = 0;
566 break;
567 case 0x13: /* NORON */
568 s->partial = 0;
569 s->normal = 1;
570 s->vscr = 0;
571 break;
572
573 case 0x20: /* INVOFF */
574 s->invert = 0;
575 break;
576 case 0x21: /* INVON */
577 s->invert = 1;
578 break;
579
580 case 0x22: /* APOFF */
581 case 0x23: /* APON */
582 goto bad_cmd;
583
584 case 0x25: /* WRCNTR */
585 if (s->pm < 0) {
586 s->pm = 1;
587 }
588 goto bad_cmd;
589
590 case 0x26: /* GAMSET */
591 if (!s->pm) {
592 s->gamma = ctz32(s->param[0] & 0xf);
593 if (s->gamma == 32) {
594 s->gamma = -1; /* XXX: should this be 0? */
595 }
596 } else if (s->pm < 0) {
597 s->pm = 1;
598 }
599 break;
600
601 case 0x28: /* DISPOFF */
602 s->onoff = 0;
603 break;
604 case 0x29: /* DISPON */
605 s->onoff = 1;
606 break;
607
608 case 0x2a: /* CASET */
609 case 0x2b: /* RASET */
610 case 0x2c: /* RAMWR */
611 case 0x2d: /* RGBSET */
612 case 0x2e: /* RAMRD */
613 case 0x30: /* PTLAR */
614 case 0x33: /* SCRLAR */
615 goto bad_cmd;
616
617 case 0x34: /* TEOFF */
618 s->te = 0;
619 break;
620 case 0x35: /* TEON */
621 if (!s->pm) {
622 s->te = 1;
623 } else if (s->pm < 0) {
624 s->pm = 1;
625 }
626 break;
627
628 case 0x36: /* MADCTR */
629 goto bad_cmd;
630
631 case 0x37: /* VSCSAD */
632 s->partial = 0;
633 s->normal = 0;
634 s->vscr = 1;
635 break;
636
637 case 0x38: /* IDMOFF */
638 case 0x39: /* IDMON */
639 case 0x3a: /* COLMOD */
640 goto bad_cmd;
641
642 case 0xb0: /* CLKINT / DISCTL */
643 case 0xb1: /* CLKEXT */
644 if (s->pm < 0) {
645 s->pm = 2;
646 }
647 break;
648
649 case 0xb4: /* FRMSEL */
650 break;
651
652 case 0xb5: /* FRM8SEL */
653 case 0xb6: /* TMPRNG / INIESC */
654 case 0xb7: /* TMPHIS / NOP2 */
655 case 0xb8: /* TMPREAD / MADCTL */
656 case 0xba: /* DISTCTR */
657 case 0xbb: /* EPVOL */
658 goto bad_cmd;
659
660 case 0xbd: /* Unknown */
661 s->p = 0;
662 s->resp[0] = 0;
663 s->resp[1] = 1;
664 break;
665
666 case 0xc2: /* IFMOD */
667 if (s->pm < 0) {
668 s->pm = 2;
669 }
670 break;
671
672 case 0xc6: /* PWRCTL */
673 case 0xc7: /* PPWRCTL */
674 case 0xd0: /* EPWROUT */
675 case 0xd1: /* EPWRIN */
676 case 0xd4: /* RDEV */
677 case 0xd5: /* RDRR */
678 goto bad_cmd;
679
680 case 0xda: /* RDID1 */
681 s->p = 0;
682 s->resp[0] = (s->id >> 16) & 0xff;
683 break;
684 case 0xdb: /* RDID2 */
685 s->p = 0;
686 s->resp[0] = (s->id >> 8) & 0xff;
687 break;
688 case 0xdc: /* RDID3 */
689 s->p = 0;
690 s->resp[0] = (s->id >> 0) & 0xff;
691 break;
692
693 default:
694 bad_cmd:
695 qemu_log_mask(LOG_GUEST_ERROR,
696 "%s: unknown command %02x\n", __func__, s->cmd);
697 break;
698 }
699
700 return ret;
701 }
702
703 static void *mipid_init(void)
704 {
705 struct mipid_s *s = (struct mipid_s *) g_malloc0(sizeof(*s));
706
707 s->id = 0x838f03;
708 mipid_reset(s);
709
710 return s;
711 }
712
713 static void n8x0_spi_setup(struct n800_s *s)
714 {
715 void *tsc = s->ts.opaque;
716 void *mipid = mipid_init();
717
718 omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
719 omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
720 }
721
722 /* This task is normally performed by the bootloader. If we're loading
723 * a kernel directly, we need to enable the Blizzard ourselves. */
724 static void n800_dss_init(struct rfbi_chip_s *chip)
725 {
726 uint8_t *fb_blank;
727
728 chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */
729 chip->write(chip->opaque, 1, 0x64);
730 chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */
731 chip->write(chip->opaque, 1, 0x1e);
732 chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */
733 chip->write(chip->opaque, 1, 0xe0);
734 chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */
735 chip->write(chip->opaque, 1, 0x01);
736 chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */
737 chip->write(chip->opaque, 1, 0x06);
738 chip->write(chip->opaque, 0, 0x68); /* Display Mode register */
739 chip->write(chip->opaque, 1, 1); /* Enable bit */
740
741 chip->write(chip->opaque, 0, 0x6c);
742 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
743 chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
744 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
745 chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
746 chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */
747 chip->write(chip->opaque, 1, 0x03); /* Input X End Position */
748 chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */
749 chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */
750 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
751 chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
752 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
753 chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
754 chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */
755 chip->write(chip->opaque, 1, 0x03); /* Output X End Position */
756 chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */
757 chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */
758 chip->write(chip->opaque, 1, 0x01); /* Input Data Format */
759 chip->write(chip->opaque, 1, 0x01); /* Data Source Select */
760
761 fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2);
762 /* Display Memory Data Port */
763 chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800);
764 g_free(fb_blank);
765 }
766
767 static void n8x0_dss_setup(struct n800_s *s)
768 {
769 s->blizzard.opaque = s1d13745_init(NULL);
770 s->blizzard.block = s1d13745_write_block;
771 s->blizzard.write = s1d13745_write;
772 s->blizzard.read = s1d13745_read;
773
774 omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
775 }
776
777 static void n8x0_cbus_setup(struct n800_s *s)
778 {
779 qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
780 qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
781 qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
782
783 CBus *cbus = cbus_init(dat_out);
784
785 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
786 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
787 qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
788
789 cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
790 cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
791 }
792
793 static void n8x0_uart_setup(struct n800_s *s)
794 {
795 Chardev *radio = qemu_chr_new("bt-dummy-uart", "null", NULL);
796 /*
797 * Note: We used to connect N8X0_BT_RESET_GPIO and N8X0_BT_WKUP_GPIO
798 * here, but this code has been removed with the bluetooth backend.
799 */
800 omap_uart_attach(s->mpu->uart[BT_UART], radio);
801 }
802
803 static void n8x0_usb_setup(struct n800_s *s)
804 {
805 SysBusDevice *dev;
806 s->usb = qdev_create(NULL, "tusb6010");
807 dev = SYS_BUS_DEVICE(s->usb);
808 qdev_init_nofail(s->usb);
809 sysbus_connect_irq(dev, 0,
810 qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
811 /* Using the NOR interface */
812 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
813 sysbus_mmio_get_region(dev, 0));
814 omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
815 sysbus_mmio_get_region(dev, 1));
816 qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
817 qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
818 }
819
820 /* Setup done before the main bootloader starts by some early setup code
821 * - used when we want to run the main bootloader in emulation. This
822 * isn't documented. */
823 static uint32_t n800_pinout[104] = {
824 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
825 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
826 0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
827 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128,
828 0x01241800, 0x18181818, 0x000000f0, 0x01300000,
829 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b,
830 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080,
831 0x007c0000, 0x00000000, 0x00000088, 0x00840000,
832 0x00000000, 0x00000094, 0x00980300, 0x0f180003,
833 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c,
834 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008,
835 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f,
836 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc,
837 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008,
838 0x00000000, 0x00000038, 0x00340000, 0x00000000,
839 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060,
840 0x005c0808, 0x08080808, 0x08080058, 0x00540808,
841 0x08080808, 0x0808006c, 0x00680808, 0x08080808,
842 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0,
843 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808,
844 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff,
845 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100,
846 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a,
847 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00,
848 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118,
849 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b,
850 };
851
852 static void n800_setup_nolo_tags(void *sram_base)
853 {
854 int i;
855 uint32_t *p = sram_base + 0x8000;
856 uint32_t *v = sram_base + 0xa000;
857
858 memset(p, 0, 0x3000);
859
860 strcpy((void *) (p + 0), "QEMU N800");
861
862 strcpy((void *) (p + 8), "F5");
863
864 stl_p(p + 10, 0x04f70000);
865 strcpy((void *) (p + 9), "RX-34");
866
867 /* RAM size in MB? */
868 stl_p(p + 12, 0x80);
869
870 /* Pointer to the list of tags */
871 stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
872
873 /* The NOLO tags start here */
874 p = sram_base + 0x9000;
875 #define ADD_TAG(tag, len) \
876 stw_p((uint16_t *) p + 0, tag); \
877 stw_p((uint16_t *) p + 1, len); p++; \
878 stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
879
880 /* OMAP STI console? Pin out settings? */
881 ADD_TAG(0x6e01, 414);
882 for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
883 stl_p(v++, n800_pinout[i]);
884 }
885
886 /* Kernel memsize? */
887 ADD_TAG(0x6e05, 1);
888 stl_p(v++, 2);
889
890 /* NOLO serial console */
891 ADD_TAG(0x6e02, 4);
892 stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */
893
894 #if 0
895 /* CBUS settings (Retu/AVilma) */
896 ADD_TAG(0x6e03, 6);
897 stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
898 stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
899 stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
900 v += 2;
901 #endif
902
903 /* Nokia ASIC BB5 (Retu/Tahvo) */
904 ADD_TAG(0x6e0a, 4);
905 stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
906 stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
907 v++;
908
909 /* LCD console? */
910 ADD_TAG(0x6e04, 4);
911 stw_p((uint16_t *) v + 0, 30); /* ??? */
912 stw_p((uint16_t *) v + 1, 24); /* ??? */
913 v++;
914
915 #if 0
916 /* LCD settings */
917 ADD_TAG(0x6e06, 2);
918 stw_p((uint16_t *) (v++), 15); /* ??? */
919 #endif
920
921 /* I^2C (Menelaus) */
922 ADD_TAG(0x6e07, 4);
923 stl_p(v++, 0x00720000); /* ??? */
924
925 /* Unknown */
926 ADD_TAG(0x6e0b, 6);
927 stw_p((uint16_t *) v + 0, 94); /* ??? */
928 stw_p((uint16_t *) v + 1, 23); /* ??? */
929 stw_p((uint16_t *) v + 2, 0); /* ??? */
930 v += 2;
931
932 /* OMAP gpio switch info */
933 ADD_TAG(0x6e0c, 80);
934 strcpy((void *) v, "bat_cover"); v += 3;
935 stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */
936 stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */
937 v += 2;
938 strcpy((void *) v, "cam_act"); v += 3;
939 stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */
940 stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */
941 v += 2;
942 strcpy((void *) v, "cam_turn"); v += 3;
943 stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */
944 stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */
945 v += 2;
946 strcpy((void *) v, "headphone"); v += 3;
947 stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */
948 stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */
949 v += 2;
950
951 /* Bluetooth */
952 ADD_TAG(0x6e0e, 12);
953 stl_p(v++, 0x5c623d01); /* ??? */
954 stl_p(v++, 0x00000201); /* ??? */
955 stl_p(v++, 0x00000000); /* ??? */
956
957 /* CX3110x WLAN settings */
958 ADD_TAG(0x6e0f, 8);
959 stl_p(v++, 0x00610025); /* ??? */
960 stl_p(v++, 0xffff0057); /* ??? */
961
962 /* MMC host settings */
963 ADD_TAG(0x6e10, 12);
964 stl_p(v++, 0xffff000f); /* ??? */
965 stl_p(v++, 0xffffffff); /* ??? */
966 stl_p(v++, 0x00000060); /* ??? */
967
968 /* OneNAND chip select */
969 ADD_TAG(0x6e11, 10);
970 stl_p(v++, 0x00000401); /* ??? */
971 stl_p(v++, 0x0002003a); /* ??? */
972 stl_p(v++, 0x00000002); /* ??? */
973
974 /* TEA5761 sensor settings */
975 ADD_TAG(0x6e12, 2);
976 stl_p(v++, 93); /* GPIO num ??? */
977
978 #if 0
979 /* Unknown tag */
980 ADD_TAG(6e09, 0);
981
982 /* Kernel UART / console */
983 ADD_TAG(6e12, 0);
984 #endif
985
986 /* End of the list */
987 stl_p(p++, 0x00000000);
988 stl_p(p++, 0x00000000);
989 }
990
991 /* This task is normally performed by the bootloader. If we're loading
992 * a kernel directly, we need to set up GPMC mappings ourselves. */
993 static void n800_gpmc_init(struct n800_s *s)
994 {
995 uint32_t config7 =
996 (0xf << 8) | /* MASKADDRESS */
997 (1 << 6) | /* CSVALID */
998 (4 << 0); /* BASEADDRESS */
999
1000 cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */
1001 &config7, sizeof(config7));
1002 }
1003
1004 /* Setup sequence done by the bootloader */
1005 static void n8x0_boot_init(void *opaque)
1006 {
1007 struct n800_s *s = (struct n800_s *) opaque;
1008 uint32_t buf;
1009
1010 /* PRCM setup */
1011 #define omap_writel(addr, val) \
1012 buf = (val); \
1013 cpu_physical_memory_write(addr, &buf, sizeof(buf))
1014
1015 omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */
1016 omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */
1017 omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */
1018 omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */
1019 omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */
1020 omap_writel(0x48008098, 0); /* PRCM_POLCTRL */
1021 omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */
1022 omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */
1023 omap_writel(0x48008158, 1); /* RM_RSTST_MPU */
1024 omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */
1025 omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */
1026 omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */
1027 omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */
1028 omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */
1029 omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */
1030 omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */
1031 omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */
1032 omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */
1033 omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */
1034 omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */
1035 omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */
1036 omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */
1037 omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */
1038 omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */
1039 omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */
1040 omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */
1041 omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */
1042 omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */
1043 omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */
1044 omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */
1045 omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */
1046 omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */
1047 omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */
1048 omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */
1049 omap_writel(0x48008540, /* CM_CLKSEL1_PLL */
1050 (0x78 << 12) | (6 << 8));
1051 omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */
1052
1053 /* GPMC setup */
1054 n800_gpmc_init(s);
1055
1056 /* Video setup */
1057 n800_dss_init(&s->blizzard);
1058
1059 /* CPU setup */
1060 s->mpu->cpu->env.GE = 0x5;
1061
1062 /* If the machine has a slided keyboard, open it */
1063 if (s->kbd) {
1064 qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
1065 }
1066 }
1067
1068 #define OMAP_TAG_NOKIA_BT 0x4e01
1069 #define OMAP_TAG_WLAN_CX3110X 0x4e02
1070 #define OMAP_TAG_CBUS 0x4e03
1071 #define OMAP_TAG_EM_ASIC_BB5 0x4e04
1072
1073 static struct omap_gpiosw_info_s {
1074 const char *name;
1075 int line;
1076 int type;
1077 } n800_gpiosw_info[] = {
1078 {
1079 "bat_cover", N800_BAT_COVER_GPIO,
1080 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1081 }, {
1082 "cam_act", N800_CAM_ACT_GPIO,
1083 OMAP_GPIOSW_TYPE_ACTIVITY,
1084 }, {
1085 "cam_turn", N800_CAM_TURN_GPIO,
1086 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED,
1087 }, {
1088 "headphone", N8X0_HEADPHONE_GPIO,
1089 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
1090 },
1091 { NULL }
1092 }, n810_gpiosw_info[] = {
1093 {
1094 "gps_reset", N810_GPS_RESET_GPIO,
1095 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
1096 }, {
1097 "gps_wakeup", N810_GPS_WAKEUP_GPIO,
1098 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
1099 }, {
1100 "headphone", N8X0_HEADPHONE_GPIO,
1101 OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
1102 }, {
1103 "kb_lock", N810_KB_LOCK_GPIO,
1104 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1105 }, {
1106 "sleepx_led", N810_SLEEPX_LED_GPIO,
1107 OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT,
1108 }, {
1109 "slide", N810_SLIDE_GPIO,
1110 OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
1111 },
1112 { NULL }
1113 };
1114
1115 static struct omap_partition_info_s {
1116 uint32_t offset;
1117 uint32_t size;
1118 int mask;
1119 const char *name;
1120 } n800_part_info[] = {
1121 { 0x00000000, 0x00020000, 0x3, "bootloader" },
1122 { 0x00020000, 0x00060000, 0x0, "config" },
1123 { 0x00080000, 0x00200000, 0x0, "kernel" },
1124 { 0x00280000, 0x00200000, 0x3, "initfs" },
1125 { 0x00480000, 0x0fb80000, 0x3, "rootfs" },
1126
1127 { 0, 0, 0, NULL }
1128 }, n810_part_info[] = {
1129 { 0x00000000, 0x00020000, 0x3, "bootloader" },
1130 { 0x00020000, 0x00060000, 0x0, "config" },
1131 { 0x00080000, 0x00220000, 0x0, "kernel" },
1132 { 0x002a0000, 0x00400000, 0x0, "initfs" },
1133 { 0x006a0000, 0x0f960000, 0x0, "rootfs" },
1134
1135 { 0, 0, 0, NULL }
1136 };
1137
1138 static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
1139
1140 static int n8x0_atag_setup(void *p, int model)
1141 {
1142 uint8_t *b;
1143 uint16_t *w;
1144 uint32_t *l;
1145 struct omap_gpiosw_info_s *gpiosw;
1146 struct omap_partition_info_s *partition;
1147 const char *tag;
1148
1149 w = p;
1150
1151 stw_p(w++, OMAP_TAG_UART); /* u16 tag */
1152 stw_p(w++, 4); /* u16 len */
1153 stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
1154 w++;
1155
1156 #if 0
1157 stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
1158 stw_p(w++, 4); /* u16 len */
1159 stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */
1160 stw_p(w++, 115200); /* u32 console_speed */
1161 #endif
1162
1163 stw_p(w++, OMAP_TAG_LCD); /* u16 tag */
1164 stw_p(w++, 36); /* u16 len */
1165 strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
1166 w += 8;
1167 strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
1168 w += 8;
1169 stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
1170 stw_p(w++, 24); /* u8 data_lines */
1171
1172 stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */
1173 stw_p(w++, 8); /* u16 len */
1174 stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
1175 stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
1176 stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
1177 w++;
1178
1179 stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
1180 stw_p(w++, 4); /* u16 len */
1181 stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
1182 stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
1183
1184 gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
1185 for (; gpiosw->name; gpiosw++) {
1186 stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
1187 stw_p(w++, 20); /* u16 len */
1188 strcpy((void *) w, gpiosw->name); /* char name[12] */
1189 w += 6;
1190 stw_p(w++, gpiosw->line); /* u16 gpio */
1191 stw_p(w++, gpiosw->type);
1192 stw_p(w++, 0);
1193 stw_p(w++, 0);
1194 }
1195
1196 stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
1197 stw_p(w++, 12); /* u16 len */
1198 b = (void *) w;
1199 stb_p(b++, 0x01); /* u8 chip_type (CSR) */
1200 stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
1201 stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
1202 stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
1203 stb_p(b++, BT_UART + 1); /* u8 bt_uart */
1204 memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
1205 b += 6;
1206 stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */
1207 w = (void *) b;
1208
1209 stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
1210 stw_p(w++, 8); /* u16 len */
1211 stw_p(w++, 0x25); /* u8 chip_type */
1212 stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
1213 stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
1214 stw_p(w++, -1); /* s16 spi_cs_gpio */
1215
1216 stw_p(w++, OMAP_TAG_MMC); /* u16 tag */
1217 stw_p(w++, 16); /* u16 len */
1218 if (model == 810) {
1219 stw_p(w++, 0x23f); /* unsigned flags */
1220 stw_p(w++, -1); /* s16 power_pin */
1221 stw_p(w++, -1); /* s16 switch_pin */
1222 stw_p(w++, -1); /* s16 wp_pin */
1223 stw_p(w++, 0x240); /* unsigned flags */
1224 stw_p(w++, 0xc000); /* s16 power_pin */
1225 stw_p(w++, 0x0248); /* s16 switch_pin */
1226 stw_p(w++, 0xc000); /* s16 wp_pin */
1227 } else {
1228 stw_p(w++, 0xf); /* unsigned flags */
1229 stw_p(w++, -1); /* s16 power_pin */
1230 stw_p(w++, -1); /* s16 switch_pin */
1231 stw_p(w++, -1); /* s16 wp_pin */
1232 stw_p(w++, 0); /* unsigned flags */
1233 stw_p(w++, 0); /* s16 power_pin */
1234 stw_p(w++, 0); /* s16 switch_pin */
1235 stw_p(w++, 0); /* s16 wp_pin */
1236 }
1237
1238 stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */
1239 stw_p(w++, 4); /* u16 len */
1240 stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
1241 w++;
1242
1243 partition = (model == 810) ? n810_part_info : n800_part_info;
1244 for (; partition->name; partition++) {
1245 stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */
1246 stw_p(w++, 28); /* u16 len */
1247 strcpy((void *) w, partition->name); /* char name[16] */
1248 l = (void *) (w + 8);
1249 stl_p(l++, partition->size); /* unsigned int size */
1250 stl_p(l++, partition->offset); /* unsigned int offset */
1251 stl_p(l++, partition->mask); /* unsigned int mask_flags */
1252 w = (void *) l;
1253 }
1254
1255 stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
1256 stw_p(w++, 12); /* u16 len */
1257 #if 0
1258 strcpy((void *) w, "por"); /* char reason_str[12] */
1259 strcpy((void *) w, "charger"); /* char reason_str[12] */
1260 strcpy((void *) w, "32wd_to"); /* char reason_str[12] */
1261 strcpy((void *) w, "sw_rst"); /* char reason_str[12] */
1262 strcpy((void *) w, "mbus"); /* char reason_str[12] */
1263 strcpy((void *) w, "unknown"); /* char reason_str[12] */
1264 strcpy((void *) w, "swdg_to"); /* char reason_str[12] */
1265 strcpy((void *) w, "sec_vio"); /* char reason_str[12] */
1266 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
1267 strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */
1268 #else
1269 strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
1270 #endif
1271 w += 6;
1272
1273 tag = (model == 810) ? "RX-44" : "RX-34";
1274 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1275 stw_p(w++, 24); /* u16 len */
1276 strcpy((void *) w, "product"); /* char component[12] */
1277 w += 6;
1278 strcpy((void *) w, tag); /* char version[12] */
1279 w += 6;
1280
1281 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1282 stw_p(w++, 24); /* u16 len */
1283 strcpy((void *) w, "hw-build"); /* char component[12] */
1284 w += 6;
1285 strcpy((void *) w, "QEMU ");
1286 pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */
1287 w += 6;
1288
1289 tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
1290 stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
1291 stw_p(w++, 24); /* u16 len */
1292 strcpy((void *) w, "nolo"); /* char component[12] */
1293 w += 6;
1294 strcpy((void *) w, tag); /* char version[12] */
1295 w += 6;
1296
1297 return (void *) w - p;
1298 }
1299
1300 static int n800_atag_setup(const struct arm_boot_info *info, void *p)
1301 {
1302 return n8x0_atag_setup(p, 800);
1303 }
1304
1305 static int n810_atag_setup(const struct arm_boot_info *info, void *p)
1306 {
1307 return n8x0_atag_setup(p, 810);
1308 }
1309
1310 static void n8x0_init(MachineState *machine,
1311 struct arm_boot_info *binfo, int model)
1312 {
1313 struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s));
1314 uint64_t sdram_size = binfo->ram_size;
1315
1316 memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram",
1317 sdram_size);
1318 memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE, &s->sdram);
1319
1320 s->mpu = omap2420_mpu_init(&s->sdram, machine->cpu_type);
1321
1322 /* Setup peripherals
1323 *
1324 * Believed external peripherals layout in the N810:
1325 * (spi bus 1)
1326 * tsc2005
1327 * lcd_mipid
1328 * (spi bus 2)
1329 * Conexant cx3110x (WLAN)
1330 * optional: pc2400m (WiMAX)
1331 * (i2c bus 0)
1332 * TLV320AIC33 (audio codec)
1333 * TCM825x (camera by Toshiba)
1334 * lp5521 (clever LEDs)
1335 * tsl2563 (light sensor, hwmon, model 7, rev. 0)
1336 * lm8323 (keypad, manf 00, rev 04)
1337 * (i2c bus 1)
1338 * tmp105 (temperature sensor, hwmon)
1339 * menelaus (pm)
1340 * (somewhere on i2c - maybe N800-only)
1341 * tea5761 (FM tuner)
1342 * (serial 0)
1343 * GPS
1344 * (some serial port)
1345 * csr41814 (Bluetooth)
1346 */
1347 n8x0_gpio_setup(s);
1348 n8x0_nand_setup(s);
1349 n8x0_i2c_setup(s);
1350 if (model == 800) {
1351 n800_tsc_kbd_setup(s);
1352 } else if (model == 810) {
1353 n810_tsc_setup(s);
1354 n810_kbd_setup(s);
1355 }
1356 n8x0_spi_setup(s);
1357 n8x0_dss_setup(s);
1358 n8x0_cbus_setup(s);
1359 n8x0_uart_setup(s);
1360 if (machine_usb(machine)) {
1361 n8x0_usb_setup(s);
1362 }
1363
1364 if (machine->kernel_filename) {
1365 /* Or at the linux loader. */
1366 arm_load_kernel(s->mpu->cpu, machine, binfo);
1367
1368 qemu_register_reset(n8x0_boot_init, s);
1369 }
1370
1371 if (option_rom[0].name &&
1372 (machine->boot_order[0] == 'n' || !machine->kernel_filename)) {
1373 uint8_t *nolo_tags = g_new(uint8_t, 0x10000);
1374 /* No, wait, better start at the ROM. */
1375 s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
1376
1377 /* This is intended for loading the `secondary.bin' program from
1378 * Nokia images (the NOLO bootloader). The entry point seems
1379 * to be at OMAP2_Q2_BASE + 0x400000.
1380 *
1381 * The `2nd.bin' files contain some kind of earlier boot code and
1382 * for them the entry point needs to be set to OMAP2_SRAM_BASE.
1383 *
1384 * The code above is for loading the `zImage' file from Nokia
1385 * images. */
1386 load_image_targphys(option_rom[0].name,
1387 OMAP2_Q2_BASE + 0x400000,
1388 sdram_size - 0x400000);
1389
1390 n800_setup_nolo_tags(nolo_tags);
1391 cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000);
1392 g_free(nolo_tags);
1393 }
1394 }
1395
1396 static struct arm_boot_info n800_binfo = {
1397 .loader_start = OMAP2_Q2_BASE,
1398 /* Actually two chips of 0x4000000 bytes each */
1399 .ram_size = 0x08000000,
1400 .board_id = 0x4f7,
1401 .atag_board = n800_atag_setup,
1402 };
1403
1404 static struct arm_boot_info n810_binfo = {
1405 .loader_start = OMAP2_Q2_BASE,
1406 /* Actually two chips of 0x4000000 bytes each */
1407 .ram_size = 0x08000000,
1408 /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not
1409 * used by some older versions of the bootloader and 5555 is used
1410 * instead (including versions that shipped with many devices). */
1411 .board_id = 0x60c,
1412 .atag_board = n810_atag_setup,
1413 };
1414
1415 static void n800_init(MachineState *machine)
1416 {
1417 n8x0_init(machine, &n800_binfo, 800);
1418 }
1419
1420 static void n810_init(MachineState *machine)
1421 {
1422 n8x0_init(machine, &n810_binfo, 810);
1423 }
1424
1425 static void n800_class_init(ObjectClass *oc, void *data)
1426 {
1427 MachineClass *mc = MACHINE_CLASS(oc);
1428
1429 mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)";
1430 mc->init = n800_init;
1431 mc->default_boot_order = "";
1432 mc->ignore_memory_transaction_failures = true;
1433 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
1434 }
1435
1436 static const TypeInfo n800_type = {
1437 .name = MACHINE_TYPE_NAME("n800"),
1438 .parent = TYPE_MACHINE,
1439 .class_init = n800_class_init,
1440 };
1441
1442 static void n810_class_init(ObjectClass *oc, void *data)
1443 {
1444 MachineClass *mc = MACHINE_CLASS(oc);
1445
1446 mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)";
1447 mc->init = n810_init;
1448 mc->default_boot_order = "";
1449 mc->ignore_memory_transaction_failures = true;
1450 mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
1451 }
1452
1453 static const TypeInfo n810_type = {
1454 .name = MACHINE_TYPE_NAME("n810"),
1455 .parent = TYPE_MACHINE,
1456 .class_init = n810_class_init,
1457 };
1458
1459 static void nseries_machine_init(void)
1460 {
1461 type_register_static(&n800_type);
1462 type_register_static(&n810_type);
1463 }
1464
1465 type_init(nseries_machine_init)
AR7 emulation for QEMU