target/arm: Update CNTP for PREDDESC
[qemu/ar7.git] / hw / pci-host / designware.c
blobbde3a343a2f50bfc5a3a8159097b100dfe337ae4
1 /*
2 * Copyright (c) 2018, Impinj, Inc.
4 * Designware PCIe IP block emulation
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2.1 of the License, or (at your option) any later version.
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, see
18 * <http://www.gnu.org/licenses/>.
21 #include "qemu/osdep.h"
22 #include "qapi/error.h"
23 #include "qemu/module.h"
24 #include "qemu/log.h"
25 #include "hw/pci/msi.h"
26 #include "hw/pci/pci_bridge.h"
27 #include "hw/pci/pci_host.h"
28 #include "hw/pci/pcie_port.h"
29 #include "hw/qdev-properties.h"
30 #include "migration/vmstate.h"
31 #include "hw/irq.h"
32 #include "hw/pci-host/designware.h"
34 #define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710
35 #define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C
36 #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4)
37 #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
38 #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17)
39 #define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820
40 #define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824
41 #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828
42 #define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C
43 #define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830
44 #define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900
45 #define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31)
46 #define DESIGNWARE_PCIE_ATU_CR1 0x904
47 #define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0)
48 #define DESIGNWARE_PCIE_ATU_CR2 0x908
49 #define DESIGNWARE_PCIE_ATU_ENABLE BIT(31)
50 #define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C
51 #define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910
52 #define DESIGNWARE_PCIE_ATU_LIMIT 0x914
53 #define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918
54 #define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff)
55 #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff)
56 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C
58 #define DESIGNWARE_PCIE_IRQ_MSI 3
60 static DesignwarePCIEHost *
61 designware_pcie_root_to_host(DesignwarePCIERoot *root)
63 BusState *bus = qdev_get_parent_bus(DEVICE(root));
64 return DESIGNWARE_PCIE_HOST(bus->parent);
67 static uint64_t designware_pcie_root_msi_read(void *opaque, hwaddr addr,
68 unsigned size)
71 * Attempts to read from the MSI address are undefined in
72 * the PCI specifications. For this hardware, the datasheet
73 * specifies that a read from the magic address is simply not
74 * intercepted by the MSI controller, and will go out to the
75 * AHB/AXI bus like any other PCI-device-initiated DMA read.
76 * This is not trivial to implement in QEMU, so since
77 * well-behaved guests won't ever ask a PCI device to DMA from
78 * this address we just log the missing functionality.
80 qemu_log_mask(LOG_UNIMP, "%s not implemented\n", __func__);
81 return 0;
84 static void designware_pcie_root_msi_write(void *opaque, hwaddr addr,
85 uint64_t val, unsigned len)
87 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque);
88 DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
90 root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable;
92 if (root->msi.intr[0].status & ~root->msi.intr[0].mask) {
93 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1);
97 static const MemoryRegionOps designware_pci_host_msi_ops = {
98 .read = designware_pcie_root_msi_read,
99 .write = designware_pcie_root_msi_write,
100 .endianness = DEVICE_LITTLE_ENDIAN,
101 .valid = {
102 .min_access_size = 4,
103 .max_access_size = 4,
107 static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root)
110 MemoryRegion *mem = &root->msi.iomem;
111 const uint64_t base = root->msi.base;
112 const bool enable = root->msi.intr[0].enable;
114 memory_region_set_address(mem, base);
115 memory_region_set_enabled(mem, enable);
118 static DesignwarePCIEViewport *
119 designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root)
121 const unsigned int idx = root->atu_viewport & 0xF;
122 const unsigned int dir =
123 !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND);
124 return &root->viewports[dir][idx];
127 static uint32_t
128 designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len)
130 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
131 DesignwarePCIEViewport *viewport =
132 designware_pcie_root_get_current_viewport(root);
134 uint32_t val;
136 switch (address) {
137 case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
139 * Linux guest uses this register only to configure number of
140 * PCIE lane (which in our case is irrelevant) and doesn't
141 * really care about the value it reads from this register
143 val = 0xDEADBEEF;
144 break;
146 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
148 * To make sure that any code in guest waiting for speed
149 * change does not time out we always report
150 * PORT_LOGIC_SPEED_CHANGE as set
152 val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE;
153 break;
155 case DESIGNWARE_PCIE_MSI_ADDR_LO:
156 val = root->msi.base;
157 break;
159 case DESIGNWARE_PCIE_MSI_ADDR_HI:
160 val = root->msi.base >> 32;
161 break;
163 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
164 val = root->msi.intr[0].enable;
165 break;
167 case DESIGNWARE_PCIE_MSI_INTR0_MASK:
168 val = root->msi.intr[0].mask;
169 break;
171 case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
172 val = root->msi.intr[0].status;
173 break;
175 case DESIGNWARE_PCIE_PHY_DEBUG_R1:
176 val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
177 break;
179 case DESIGNWARE_PCIE_ATU_VIEWPORT:
180 val = root->atu_viewport;
181 break;
183 case DESIGNWARE_PCIE_ATU_LOWER_BASE:
184 val = viewport->base;
185 break;
187 case DESIGNWARE_PCIE_ATU_UPPER_BASE:
188 val = viewport->base >> 32;
189 break;
191 case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
192 val = viewport->target;
193 break;
195 case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
196 val = viewport->target >> 32;
197 break;
199 case DESIGNWARE_PCIE_ATU_LIMIT:
200 val = viewport->limit;
201 break;
203 case DESIGNWARE_PCIE_ATU_CR1:
204 case DESIGNWARE_PCIE_ATU_CR2:
205 val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) /
206 sizeof(uint32_t)];
207 break;
209 default:
210 val = pci_default_read_config(d, address, len);
211 break;
214 return val;
217 static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr,
218 uint64_t *val, unsigned len)
220 DesignwarePCIEViewport *viewport = opaque;
221 DesignwarePCIERoot *root = viewport->root;
223 const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target);
224 const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target);
225 PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root));
226 PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn);
228 if (pcidev) {
229 addr &= pci_config_size(pcidev) - 1;
231 if (val) {
232 pci_host_config_write_common(pcidev, addr,
233 pci_config_size(pcidev),
234 *val, len);
235 } else {
236 return pci_host_config_read_common(pcidev, addr,
237 pci_config_size(pcidev),
238 len);
242 return UINT64_MAX;
245 static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr,
246 unsigned len)
248 return designware_pcie_root_data_access(opaque, addr, NULL, len);
251 static void designware_pcie_root_data_write(void *opaque, hwaddr addr,
252 uint64_t val, unsigned len)
254 designware_pcie_root_data_access(opaque, addr, &val, len);
257 static const MemoryRegionOps designware_pci_host_conf_ops = {
258 .read = designware_pcie_root_data_read,
259 .write = designware_pcie_root_data_write,
260 .endianness = DEVICE_LITTLE_ENDIAN,
261 .valid = {
262 .min_access_size = 1,
263 .max_access_size = 4,
267 static void designware_pcie_update_viewport(DesignwarePCIERoot *root,
268 DesignwarePCIEViewport *viewport)
270 const uint64_t target = viewport->target;
271 const uint64_t base = viewport->base;
272 const uint64_t size = (uint64_t)viewport->limit - base + 1;
273 const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE;
275 MemoryRegion *current, *other;
277 if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) {
278 current = &viewport->mem;
279 other = &viewport->cfg;
280 memory_region_set_alias_offset(current, target);
281 } else {
282 current = &viewport->cfg;
283 other = &viewport->mem;
287 * An outbound viewport can be reconfigure from being MEM to CFG,
288 * to account for that we disable the "other" memory region that
289 * becomes unused due to that fact.
291 memory_region_set_enabled(other, false);
292 if (enabled) {
293 memory_region_set_size(current, size);
294 memory_region_set_address(current, base);
296 memory_region_set_enabled(current, enabled);
299 static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
300 uint32_t val, int len)
302 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
303 DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
304 DesignwarePCIEViewport *viewport =
305 designware_pcie_root_get_current_viewport(root);
307 switch (address) {
308 case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
309 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
310 case DESIGNWARE_PCIE_PHY_DEBUG_R1:
311 /* No-op */
312 break;
314 case DESIGNWARE_PCIE_MSI_ADDR_LO:
315 root->msi.base &= 0xFFFFFFFF00000000ULL;
316 root->msi.base |= val;
317 designware_pcie_root_update_msi_mapping(root);
318 break;
320 case DESIGNWARE_PCIE_MSI_ADDR_HI:
321 root->msi.base &= 0x00000000FFFFFFFFULL;
322 root->msi.base |= (uint64_t)val << 32;
323 designware_pcie_root_update_msi_mapping(root);
324 break;
326 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
327 root->msi.intr[0].enable = val;
328 designware_pcie_root_update_msi_mapping(root);
329 break;
331 case DESIGNWARE_PCIE_MSI_INTR0_MASK:
332 root->msi.intr[0].mask = val;
333 break;
335 case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
336 root->msi.intr[0].status ^= val;
337 if (!root->msi.intr[0].status) {
338 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0);
340 break;
342 case DESIGNWARE_PCIE_ATU_VIEWPORT:
343 root->atu_viewport = val;
344 break;
346 case DESIGNWARE_PCIE_ATU_LOWER_BASE:
347 viewport->base &= 0xFFFFFFFF00000000ULL;
348 viewport->base |= val;
349 break;
351 case DESIGNWARE_PCIE_ATU_UPPER_BASE:
352 viewport->base &= 0x00000000FFFFFFFFULL;
353 viewport->base |= (uint64_t)val << 32;
354 break;
356 case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
357 viewport->target &= 0xFFFFFFFF00000000ULL;
358 viewport->target |= val;
359 break;
361 case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
362 viewport->target &= 0x00000000FFFFFFFFULL;
363 viewport->target |= val;
364 break;
366 case DESIGNWARE_PCIE_ATU_LIMIT:
367 viewport->limit = val;
368 break;
370 case DESIGNWARE_PCIE_ATU_CR1:
371 viewport->cr[0] = val;
372 break;
373 case DESIGNWARE_PCIE_ATU_CR2:
374 viewport->cr[1] = val;
375 designware_pcie_update_viewport(root, viewport);
376 break;
378 default:
379 pci_bridge_write_config(d, address, val, len);
380 break;
384 static char *designware_pcie_viewport_name(const char *direction,
385 unsigned int i,
386 const char *type)
388 return g_strdup_printf("PCI %s Viewport %u [%s]",
389 direction, i, type);
392 static void designware_pcie_root_realize(PCIDevice *dev, Error **errp)
394 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev);
395 DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
396 MemoryRegion *address_space = &host->pci.memory;
397 PCIBridge *br = PCI_BRIDGE(dev);
398 DesignwarePCIEViewport *viewport;
400 * Dummy values used for initial configuration of MemoryRegions
401 * that belong to a given viewport
403 const hwaddr dummy_offset = 0;
404 const uint64_t dummy_size = 4;
405 size_t i;
407 br->bus_name = "dw-pcie";
409 pci_set_word(dev->config + PCI_COMMAND,
410 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
412 pci_config_set_interrupt_pin(dev->config, 1);
413 pci_bridge_initfn(dev, TYPE_PCIE_BUS);
415 pcie_port_init_reg(dev);
417 pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT,
418 0, &error_fatal);
420 msi_nonbroken = true;
421 msi_init(dev, 0x50, 32, true, true, &error_fatal);
423 for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) {
424 MemoryRegion *source, *destination, *mem;
425 const char *direction;
426 char *name;
428 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i];
429 viewport->inbound = true;
430 viewport->base = 0x0000000000000000ULL;
431 viewport->target = 0x0000000000000000ULL;
432 viewport->limit = UINT32_MAX;
433 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
435 source = &host->pci.address_space_root;
436 destination = get_system_memory();
437 direction = "Inbound";
440 * Configure MemoryRegion implementing PCI -> CPU memory
441 * access
443 mem = &viewport->mem;
444 name = designware_pcie_viewport_name(direction, i, "MEM");
445 memory_region_init_alias(mem, OBJECT(root), name, destination,
446 dummy_offset, dummy_size);
447 memory_region_add_subregion_overlap(source, dummy_offset, mem, -1);
448 memory_region_set_enabled(mem, false);
449 g_free(name);
451 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i];
452 viewport->root = root;
453 viewport->inbound = false;
454 viewport->base = 0x0000000000000000ULL;
455 viewport->target = 0x0000000000000000ULL;
456 viewport->limit = UINT32_MAX;
457 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
459 destination = &host->pci.memory;
460 direction = "Outbound";
461 source = get_system_memory();
464 * Configure MemoryRegion implementing CPU -> PCI memory
465 * access
467 mem = &viewport->mem;
468 name = designware_pcie_viewport_name(direction, i, "MEM");
469 memory_region_init_alias(mem, OBJECT(root), name, destination,
470 dummy_offset, dummy_size);
471 memory_region_add_subregion(source, dummy_offset, mem);
472 memory_region_set_enabled(mem, false);
473 g_free(name);
476 * Configure MemoryRegion implementing access to configuration
477 * space
479 mem = &viewport->cfg;
480 name = designware_pcie_viewport_name(direction, i, "CFG");
481 memory_region_init_io(&viewport->cfg, OBJECT(root),
482 &designware_pci_host_conf_ops,
483 viewport, name, dummy_size);
484 memory_region_add_subregion(source, dummy_offset, mem);
485 memory_region_set_enabled(mem, false);
486 g_free(name);
490 * If no inbound iATU windows are configured, HW defaults to
491 * letting inbound TLPs to pass in. We emulate that by exlicitly
492 * configuring first inbound window to cover all of target's
493 * address space.
495 * NOTE: This will not work correctly for the case when first
496 * configured inbound window is window 0
498 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0];
499 viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE;
500 designware_pcie_update_viewport(root, viewport);
502 memory_region_init_io(&root->msi.iomem, OBJECT(root),
503 &designware_pci_host_msi_ops,
504 root, "pcie-msi", 0x4);
506 * We initially place MSI interrupt I/O region a adress 0 and
507 * disable it. It'll be later moved to correct offset and enabled
508 * in designware_pcie_root_update_msi_mapping() as a part of
509 * initialization done by guest OS
511 memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem);
512 memory_region_set_enabled(&root->msi.iomem, false);
515 static void designware_pcie_set_irq(void *opaque, int irq_num, int level)
517 DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque);
519 qemu_set_irq(host->pci.irqs[irq_num], level);
522 static const char *
523 designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus)
525 return "0000:00";
528 static const VMStateDescription vmstate_designware_pcie_msi_bank = {
529 .name = "designware-pcie-msi-bank",
530 .version_id = 1,
531 .minimum_version_id = 1,
532 .fields = (VMStateField[]) {
533 VMSTATE_UINT32(enable, DesignwarePCIEMSIBank),
534 VMSTATE_UINT32(mask, DesignwarePCIEMSIBank),
535 VMSTATE_UINT32(status, DesignwarePCIEMSIBank),
536 VMSTATE_END_OF_LIST()
540 static const VMStateDescription vmstate_designware_pcie_msi = {
541 .name = "designware-pcie-msi",
542 .version_id = 1,
543 .minimum_version_id = 1,
544 .fields = (VMStateField[]) {
545 VMSTATE_UINT64(base, DesignwarePCIEMSI),
546 VMSTATE_STRUCT_ARRAY(intr,
547 DesignwarePCIEMSI,
548 DESIGNWARE_PCIE_NUM_MSI_BANKS,
550 vmstate_designware_pcie_msi_bank,
551 DesignwarePCIEMSIBank),
552 VMSTATE_END_OF_LIST()
556 static const VMStateDescription vmstate_designware_pcie_viewport = {
557 .name = "designware-pcie-viewport",
558 .version_id = 1,
559 .minimum_version_id = 1,
560 .fields = (VMStateField[]) {
561 VMSTATE_UINT64(base, DesignwarePCIEViewport),
562 VMSTATE_UINT64(target, DesignwarePCIEViewport),
563 VMSTATE_UINT32(limit, DesignwarePCIEViewport),
564 VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2),
565 VMSTATE_END_OF_LIST()
569 static const VMStateDescription vmstate_designware_pcie_root = {
570 .name = "designware-pcie-root",
571 .version_id = 1,
572 .minimum_version_id = 1,
573 .fields = (VMStateField[]) {
574 VMSTATE_PCI_DEVICE(parent_obj, PCIBridge),
575 VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot),
576 VMSTATE_STRUCT_2DARRAY(viewports,
577 DesignwarePCIERoot,
579 DESIGNWARE_PCIE_NUM_VIEWPORTS,
581 vmstate_designware_pcie_viewport,
582 DesignwarePCIEViewport),
583 VMSTATE_STRUCT(msi,
584 DesignwarePCIERoot,
586 vmstate_designware_pcie_msi,
587 DesignwarePCIEMSI),
588 VMSTATE_END_OF_LIST()
592 static void designware_pcie_root_class_init(ObjectClass *klass, void *data)
594 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
595 DeviceClass *dc = DEVICE_CLASS(klass);
597 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
599 k->vendor_id = PCI_VENDOR_ID_SYNOPSYS;
600 k->device_id = 0xABCD;
601 k->revision = 0;
602 k->class_id = PCI_CLASS_BRIDGE_PCI;
603 k->is_bridge = true;
604 k->exit = pci_bridge_exitfn;
605 k->realize = designware_pcie_root_realize;
606 k->config_read = designware_pcie_root_config_read;
607 k->config_write = designware_pcie_root_config_write;
609 dc->reset = pci_bridge_reset;
611 * PCI-facing part of the host bridge, not usable without the
612 * host-facing part, which can't be device_add'ed, yet.
614 dc->user_creatable = false;
615 dc->vmsd = &vmstate_designware_pcie_root;
618 static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr,
619 unsigned int size)
621 PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
622 PCIDevice *device = pci_find_device(pci->bus, 0, 0);
624 return pci_host_config_read_common(device,
625 addr,
626 pci_config_size(device),
627 size);
630 static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr,
631 uint64_t val, unsigned int size)
633 PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
634 PCIDevice *device = pci_find_device(pci->bus, 0, 0);
636 return pci_host_config_write_common(device,
637 addr,
638 pci_config_size(device),
639 val, size);
642 static const MemoryRegionOps designware_pci_mmio_ops = {
643 .read = designware_pcie_host_mmio_read,
644 .write = designware_pcie_host_mmio_write,
645 .endianness = DEVICE_LITTLE_ENDIAN,
646 .impl = {
648 * Our device would not work correctly if the guest was doing
649 * unaligned access. This might not be a limitation on the real
650 * device but in practice there is no reason for a guest to access
651 * this device unaligned.
653 .min_access_size = 4,
654 .max_access_size = 4,
655 .unaligned = false,
659 static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque,
660 int devfn)
662 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque);
664 return &s->pci.address_space;
667 static void designware_pcie_host_realize(DeviceState *dev, Error **errp)
669 PCIHostState *pci = PCI_HOST_BRIDGE(dev);
670 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev);
671 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
672 size_t i;
674 for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) {
675 sysbus_init_irq(sbd, &s->pci.irqs[i]);
678 memory_region_init_io(&s->mmio,
679 OBJECT(s),
680 &designware_pci_mmio_ops,
682 "pcie.reg", 4 * 1024);
683 sysbus_init_mmio(sbd, &s->mmio);
685 memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16);
686 memory_region_init(&s->pci.memory, OBJECT(s),
687 "pcie-bus-memory",
688 UINT64_MAX);
690 pci->bus = pci_register_root_bus(dev, "pcie",
691 designware_pcie_set_irq,
692 pci_swizzle_map_irq_fn,
694 &s->pci.memory,
695 &s->pci.io,
696 0, 4,
697 TYPE_PCIE_BUS);
699 memory_region_init(&s->pci.address_space_root,
700 OBJECT(s),
701 "pcie-bus-address-space-root",
702 UINT64_MAX);
703 memory_region_add_subregion(&s->pci.address_space_root,
704 0x0, &s->pci.memory);
705 address_space_init(&s->pci.address_space,
706 &s->pci.address_space_root,
707 "pcie-bus-address-space");
708 pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s);
710 qdev_realize(DEVICE(&s->root), BUS(pci->bus), &error_fatal);
713 static const VMStateDescription vmstate_designware_pcie_host = {
714 .name = "designware-pcie-host",
715 .version_id = 1,
716 .minimum_version_id = 1,
717 .fields = (VMStateField[]) {
718 VMSTATE_STRUCT(root,
719 DesignwarePCIEHost,
721 vmstate_designware_pcie_root,
722 DesignwarePCIERoot),
723 VMSTATE_END_OF_LIST()
727 static void designware_pcie_host_class_init(ObjectClass *klass, void *data)
729 DeviceClass *dc = DEVICE_CLASS(klass);
730 PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
732 hc->root_bus_path = designware_pcie_host_root_bus_path;
733 dc->realize = designware_pcie_host_realize;
734 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
735 dc->fw_name = "pci";
736 dc->vmsd = &vmstate_designware_pcie_host;
739 static void designware_pcie_host_init(Object *obj)
741 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj);
742 DesignwarePCIERoot *root = &s->root;
744 object_initialize_child(obj, "root", root, TYPE_DESIGNWARE_PCIE_ROOT);
745 qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
746 qdev_prop_set_bit(DEVICE(root), "multifunction", false);
749 static const TypeInfo designware_pcie_root_info = {
750 .name = TYPE_DESIGNWARE_PCIE_ROOT,
751 .parent = TYPE_PCI_BRIDGE,
752 .instance_size = sizeof(DesignwarePCIERoot),
753 .class_init = designware_pcie_root_class_init,
754 .interfaces = (InterfaceInfo[]) {
755 { INTERFACE_PCIE_DEVICE },
760 static const TypeInfo designware_pcie_host_info = {
761 .name = TYPE_DESIGNWARE_PCIE_HOST,
762 .parent = TYPE_PCI_HOST_BRIDGE,
763 .instance_size = sizeof(DesignwarePCIEHost),
764 .instance_init = designware_pcie_host_init,
765 .class_init = designware_pcie_host_class_init,
768 static void designware_pcie_register(void)
770 type_register_static(&designware_pcie_root_info);
771 type_register_static(&designware_pcie_host_info);
773 type_init(designware_pcie_register)