hw/arm/xlnx-zynqmp: Remove 'hw/arm/boot.h' from header
[qemu/ar7.git] / hw / net / e1000_regs.h
blob39f4882510a0b9a17d645ebdc0b2ae6fd15c78ba
1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, see <http://www.gnu.org/licenses/>.
18 The full GNU General Public License is included in this distribution in
19 the file called "COPYING".
21 Contact Information:
22 Linux NICS <linux.nics@intel.com>
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 /* e1000_hw.h
29 * Structures, enums, and macros for the MAC
32 #ifndef HW_E1000_REGS_H
33 #define HW_E1000_REGS_H
35 #include "e1000x_regs.h"
37 #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
38 #define E1000_EIAC 0x000DC /* Ext. Interrupt Auto Clear - RW */
39 #define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */
40 #define E1000_EITR 0x000E8 /* Extended Interrupt Throttling Rate - RW */
41 #define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
42 #define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
43 #define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
44 #define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
45 #define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
46 #define E1000_FCRTV 0x05F40 /* Flow Control Refresh Timer Value - RW */
47 #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
48 #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
49 #define E1000_TBT 0x00448 /* TX Burst Timer - RW */
50 #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
51 #define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
52 #define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
53 #define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
54 #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
55 #define E1000_PBM 0x10000 /* Packet Buffer Memory - RW */
56 #define E1000_PBS 0x01008 /* Packet Buffer Size - RW */
57 #define E1000_FLASHT 0x01028 /* FLASH Timer Register */
58 #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
59 #define E1000_FLSWCTL 0x01030 /* FLASH control register */
60 #define E1000_FLSWDATA 0x01034 /* FLASH data register */
61 #define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
62 #define E1000_FLOL 0x01050 /* FEEP Auto Load */
63 #define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
64 #define E1000_FCRTH_A 0x00160 /* Alias to FCRTH */
65 #define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
66 #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
67 #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
68 #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
69 #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
70 #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
71 #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
72 #define E1000_RDTR_A 0x00108 /* Alias to RDTR */
73 #define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
74 #define E1000_RDBAL0_A 0x00110 /* Alias to RDBAL0 */
75 #define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
76 #define E1000_RDBAH0_A 0x00114 /* Alias to RDBAH0 */
77 #define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
78 #define E1000_RDLEN0_A 0x00118 /* Alias to RDLEN0 */
79 #define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
80 #define E1000_RDH0_A 0x00120 /* Alias to RDH0 */
81 #define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
82 #define E1000_RDT0_A 0x00128 /* Alias to RDT0 */
83 #define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
84 #define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
85 #define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
86 #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
87 #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
88 #define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
89 #define E1000_POEMB 0x00F10 /* PHY OEM Bits Register - RW */
90 #define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
91 #define E1000_TDBAL_A 0x00420 /* Alias to TDBAL */
92 #define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
93 #define E1000_TDBAH_A 0x00424 /* Alias to TDBAH */
94 #define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
95 #define E1000_TDLEN_A 0x00428 /* Alias to TDLEN */
96 #define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
97 #define E1000_TDH_A 0x00430 /* Alias to TDH */
98 #define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
99 #define E1000_TDT_A 0x00438 /* Alias to TDT */
100 #define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
101 #define E1000_TIDV_A 0x00440 /* Alias to TIDV */
102 #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
103 #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
104 #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
105 #define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
106 #define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
107 #define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
108 #define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
109 #define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
110 #define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
111 #define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
112 #define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
113 #define E1000_SEQEC 0x04038 /* Sequence Error Count - R/clr */
114 #define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
115 #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
116 #define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
117 #define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
118 #define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
119 #define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
120 #define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
121 #define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
122 #define E1000_MFUTP01 0x05828 /* Management Flex UDP/TCP Ports 0/1 - RW */
123 #define E1000_MFUTP23 0x05830 /* Management Flex UDP/TCP Ports 2/3 - RW */
124 #define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
125 #define E1000_HOST_IF 0x08800 /* Host Interface */
126 #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
128 #define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
129 #define E1000_MDPHYA 0x0003C /* PHY address - RW */
131 #define E1000_GCR2 0x05B64 /* 3GIO Control Register 2 */
132 #define E1000_FFLT_DBG 0x05F04 /* Debug Register */
133 #define E1000_HICR 0x08F00 /* Host Interface Control */
135 #define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */
136 #define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */
137 #define E1000_RXCFGL 0x0B634 /* RX Ethertype and Message Type - RW*/
139 #define E1000_MRQC_ENABLED(mrqc) (((mrqc) & (BIT(0) | BIT(1))) == BIT(0))
141 #define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
142 #define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
143 #define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
145 #define E1000_RSS_QUEUE(reta, hash) ((E1000_RETA_VAL(reta, hash) & BIT(7)) >> 7)
147 /* [TR]DBAL and [TR]DLEN masks */
148 #define E1000_XDBAL_MASK (~(BIT(4) - 1))
149 #define E1000_XDLEN_MASK ((BIT(20) - 1) & (~(BIT(7) - 1)))
151 /* IVAR register parsing helpers */
152 #define E1000_IVAR_INT_ALLOC_VALID (0x8)
154 #define E1000_IVAR_RXQ0_SHIFT (0)
155 #define E1000_IVAR_RXQ1_SHIFT (4)
156 #define E1000_IVAR_TXQ0_SHIFT (8)
157 #define E1000_IVAR_TXQ1_SHIFT (12)
158 #define E1000_IVAR_OTHER_SHIFT (16)
160 #define E1000_IVAR_ENTRY_MASK (0xF)
161 #define E1000_IVAR_ENTRY_VALID_MASK E1000_IVAR_INT_ALLOC_VALID
162 #define E1000_IVAR_ENTRY_VEC_MASK (0x7)
164 #define E1000_IVAR_RXQ0(x) ((x) >> E1000_IVAR_RXQ0_SHIFT)
165 #define E1000_IVAR_RXQ1(x) ((x) >> E1000_IVAR_RXQ1_SHIFT)
166 #define E1000_IVAR_TXQ0(x) ((x) >> E1000_IVAR_TXQ0_SHIFT)
167 #define E1000_IVAR_TXQ1(x) ((x) >> E1000_IVAR_TXQ1_SHIFT)
168 #define E1000_IVAR_OTHER(x) ((x) >> E1000_IVAR_OTHER_SHIFT)
170 #define E1000_IVAR_ENTRY_VALID(x) ((x) & E1000_IVAR_ENTRY_VALID_MASK)
171 #define E1000_IVAR_ENTRY_VEC(x) ((x) & E1000_IVAR_ENTRY_VEC_MASK)
173 #define E1000_IVAR_TX_INT_EVERY_WB BIT(31)
175 #define E1000_RFCTL_ACK_DIS 0x00001000
176 #define E1000_RFCTL_ACK_DATA_DIS 0x00002000
178 /* PSRCTL parsing */
179 #define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
180 #define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
181 #define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
182 #define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
184 #define E1000_PSRCTL_BSIZE0_SHIFT 0
185 #define E1000_PSRCTL_BSIZE1_SHIFT 8
186 #define E1000_PSRCTL_BSIZE2_SHIFT 16
187 #define E1000_PSRCTL_BSIZE3_SHIFT 24
189 #define E1000_PSRCTL_BUFFS_PER_DESC 4
191 /* PHY 1000 MII Register/Bit Definitions */
192 /* 82574-specific registers */
193 #define PHY_COPPER_CTRL1 0x10 /* Copper Specific Control Register 1 */
194 #define PHY_COPPER_STAT1 0x11 /* Copper Specific Status Register 1 */
195 #define PHY_COPPER_INT_ENABLE 0x12 /* Interrupt Enable Register */
196 #define PHY_COPPER_STAT2 0x13 /* Copper Specific Status Register 2 */
197 #define PHY_COPPER_CTRL3 0x14 /* Copper Specific Control Register 3 */
198 #define PHY_COPPER_CTRL2 0x1A /* Copper Specific Control Register 2 */
199 #define PHY_RX_ERR_CNTR 0x15 /* Receive Error Counter */
200 #define PHY_PAGE 0x16 /* Page Address (Any page) */
201 #define PHY_OEM_BITS 0x19 /* OEM Bits (Page 0) */
202 #define PHY_BIAS_1 0x1d /* Bias Setting Register */
203 #define PHY_BIAS_2 0x1e /* Bias Setting Register */
205 /* 82574-specific registers - page 2 */
206 #define PHY_MAC_CTRL1 0x10 /* MAC Specific Control Register 1 */
207 #define PHY_MAC_INT_ENABLE 0x12 /* MAC Interrupt Enable Register */
208 #define PHY_MAC_STAT 0x13 /* MAC Specific Status Register */
209 #define PHY_MAC_CTRL2 0x15 /* MAC Specific Control Register 2 */
211 /* 82574-specific registers - page 3 */
212 #define PHY_LED_03_FUNC_CTRL1 0x10 /* LED[3:0] Function Control */
213 #define PHY_LED_03_POL_CTRL 0x11 /* LED[3:0] Polarity Control */
214 #define PHY_LED_TIMER_CTRL 0x12 /* LED Timer Control */
215 #define PHY_LED_45_CTRL 0x13 /* LED[5:4] Function Control and Polarity */
217 /* 82574-specific registers - page 5 */
218 #define PHY_1000T_SKEW 0x14 /* 1000 BASE - T Pair Skew Register */
219 #define PHY_1000T_SWAP 0x15 /* 1000 BASE - T Pair Swap and Polarity */
221 /* 82574-specific registers - page 6 */
222 #define PHY_CRC_COUNTERS 0x11 /* CRC Counters */
224 #define PHY_PAGE_RW_MASK 0x7F /* R/W part of page address register */
226 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
227 #define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
229 /* M88E1000 Specific Registers */
230 #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
231 #define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
232 #define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
233 #define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
234 #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
235 #define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
237 #define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
238 #define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
239 #define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
240 #define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
241 #define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
243 #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
244 #define E1000_STATUS_FUNC_SHIFT 2
245 #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
246 #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
247 #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
248 #define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
249 #define E1000_STATUS_SPEED_MASK 0x000000C0
250 #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
251 by EEPROM/Flash */
252 #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
253 #define E1000_STATUS_ASDV_10 0x00000000 /* ASDV 10Mb */
254 #define E1000_STATUS_ASDV_100 0x00000100 /* ASDV 100Mb */
255 #define E1000_STATUS_ASDV_1000 0x00000200 /* ASDV 1Gb */
256 #define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
257 #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
258 #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
259 #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
260 #define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
261 #define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
262 #define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
263 #define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
264 #define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
265 #define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
266 #define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
267 #define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
268 #define E1000_STATUS_FUSE_8 0x04000000
269 #define E1000_STATUS_FUSE_9 0x08000000
270 #define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
271 #define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
272 #define E1000_STATUS_SPEED_SHIFT 6
273 #define E1000_STATUS_ASDV_SHIFT 8
275 /* Transmit Descriptor */
276 struct e1000_tx_desc {
277 uint64_t buffer_addr; /* Address of the descriptor's data buffer */
278 union {
279 uint32_t data;
280 struct {
281 uint16_t length; /* Data buffer length */
282 uint8_t cso; /* Checksum offset */
283 uint8_t cmd; /* Descriptor control */
284 } flags;
285 } lower;
286 union {
287 uint32_t data;
288 struct {
289 uint8_t status; /* Descriptor status */
290 uint8_t css; /* Checksum start */
291 uint16_t special;
292 } fields;
293 } upper;
296 #define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
297 #define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
299 #endif /* HW_E1000_REGS_H */