hw/char/serial.c

   1 /*
   2  * QEMU 16550A UART emulation
   3  *
   4  * Copyright (c) 2003-2004 Fabrice Bellard
   5  * Copyright (c) 2008 Citrix Systems, Inc.
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25
  26 #include "hw/char/serial.h"
  27 #include "sysemu/char.h"
  28 #include "qemu/timer.h"
  29 #include "exec/address-spaces.h"
  30
  31 //#define DEBUG_SERIAL
  32
  33 #define UART_LCR_DLAB   0x80    /* Divisor latch access bit */
  34
  35 #define UART_IER_MSI    0x08    /* Enable Modem status interrupt */
  36 #define UART_IER_RLSI   0x04    /* Enable receiver line status interrupt */
  37 #define UART_IER_THRI   0x02    /* Enable Transmitter holding register int. */
  38 #define UART_IER_RDI    0x01    /* Enable receiver data interrupt */
  39
  40 #define UART_IIR_NO_INT 0x01    /* No interrupts pending */
  41 #define UART_IIR_ID     0x06    /* Mask for the interrupt ID */
  42
  43 #define UART_IIR_MSI    0x00    /* Modem status interrupt */
  44 #define UART_IIR_THRI   0x02    /* Transmitter holding register empty */
  45 #define UART_IIR_RDI    0x04    /* Receiver data interrupt */
  46 #define UART_IIR_RLSI   0x06    /* Receiver line status interrupt */
  47 #define UART_IIR_CTI    0x0C    /* Character Timeout Indication */
  48
  49 #define UART_IIR_FENF   0x80    /* Fifo enabled, but not functionning */
  50 #define UART_IIR_FE     0xC0    /* Fifo enabled */
  51
  52 /*
  53  * These are the definitions for the Modem Control Register
  54  */
  55 #define UART_MCR_LOOP   0x10    /* Enable loopback test mode */
  56 #define UART_MCR_OUT2   0x08    /* Out2 complement */
  57 #define UART_MCR_OUT1   0x04    /* Out1 complement */
  58 #define UART_MCR_RTS    0x02    /* RTS complement */
  59 #define UART_MCR_DTR    0x01    /* DTR complement */
  60
  61 /*
  62  * These are the definitions for the Modem Status Register
  63  */
  64 #define UART_MSR_DCD    0x80    /* Data Carrier Detect */
  65 #define UART_MSR_RI     0x40    /* Ring Indicator */
  66 #define UART_MSR_DSR    0x20    /* Data Set Ready */
  67 #define UART_MSR_CTS    0x10    /* Clear to Send */
  68 #define UART_MSR_DDCD   0x08    /* Delta DCD */
  69 #define UART_MSR_TERI   0x04    /* Trailing edge ring indicator */
  70 #define UART_MSR_DDSR   0x02    /* Delta DSR */
  71 #define UART_MSR_DCTS   0x01    /* Delta CTS */
  72 #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
  73
  74 #define UART_LSR_TEMT   0x40    /* Transmitter empty */
  75 #define UART_LSR_THRE   0x20    /* Transmit-hold-register empty */
  76 #define UART_LSR_BI     0x10    /* Break interrupt indicator */
  77 #define UART_LSR_FE     0x08    /* Frame error indicator */
  78 #define UART_LSR_PE     0x04    /* Parity error indicator */
  79 #define UART_LSR_OE     0x02    /* Overrun error indicator */
  80 #define UART_LSR_DR     0x01    /* Receiver data ready */
  81 #define UART_LSR_INT_ANY 0x1E   /* Any of the lsr-interrupt-triggering status bits */
  82
  83 /* Interrupt trigger levels. The byte-counts are for 16550A - in newer UARTs the byte-count for each ITL is higher. */
  84
  85 #define UART_FCR_ITL_1      0x00 /* 1 byte ITL */
  86 #define UART_FCR_ITL_2      0x40 /* 4 bytes ITL */
  87 #define UART_FCR_ITL_3      0x80 /* 8 bytes ITL */
  88 #define UART_FCR_ITL_4      0xC0 /* 14 bytes ITL */
  89
  90 #define UART_FCR_DMS        0x08    /* DMA Mode Select */
  91 #define UART_FCR_XFR        0x04    /* XMIT Fifo Reset */
  92 #define UART_FCR_RFR        0x02    /* RCVR Fifo Reset */
  93 #define UART_FCR_FE         0x01    /* FIFO Enable */
  94
  95 #define XMIT_FIFO           0
  96 #define RECV_FIFO           1
  97 #define MAX_XMIT_RETRY      4
  98
  99 #ifdef DEBUG_SERIAL
 100 #define DPRINTF(fmt, ...) \
 101 do { fprintf(stderr, "serial: " fmt , ## __VA_ARGS__); } while (0)
 102 #else
 103 #define DPRINTF(fmt, ...) \
 104 do {} while (0)
 105 #endif
 106
 107 static void serial_receive1(void *opaque, const uint8_t *buf, int size);
 108
 109 static void fifo_clear(SerialState *s, int fifo)
 110 {
 111     SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
 112     memset(f->data, 0, UART_FIFO_LENGTH);
 113     f->count = 0;
 114     f->head = 0;
 115     f->tail = 0;
 116 }
 117
 118 static int fifo_put(SerialState *s, int fifo, uint8_t chr)
 119 {
 120     SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
 121
 122     /* Receive overruns do not overwrite FIFO contents. */
 123     if (fifo == XMIT_FIFO || f->count < UART_FIFO_LENGTH) {
 124
 125         f->data[f->head++] = chr;
 126
 127         if (f->head == UART_FIFO_LENGTH)
 128             f->head = 0;
 129     }
 130
 131     if (f->count < UART_FIFO_LENGTH)
 132         f->count++;
 133     else if (fifo == RECV_FIFO)
 134         s->lsr |= UART_LSR_OE;
 135
 136     return 1;
 137 }
 138
 139 static uint8_t fifo_get(SerialState *s, int fifo)
 140 {
 141     SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
 142     uint8_t c;
 143
 144     if(f->count == 0)
 145         return 0;
 146
 147     c = f->data[f->tail++];
 148     if (f->tail == UART_FIFO_LENGTH)
 149         f->tail = 0;
 150     f->count--;
 151
 152     return c;
 153 }
 154
 155 static void serial_update_irq(SerialState *s)
 156 {
 157     uint8_t tmp_iir = UART_IIR_NO_INT;
 158
 159     if ((s->ier & UART_IER_RLSI) && (s->lsr & UART_LSR_INT_ANY)) {
 160         tmp_iir = UART_IIR_RLSI;
 161     } else if ((s->ier & UART_IER_RDI) && s->timeout_ipending) {
 162         /* Note that(s->ier & UART_IER_RDI) can mask this interrupt,
 163          * this is not in the specification but is observed on existing
 164          * hardware.  */
 165         tmp_iir = UART_IIR_CTI;
 166     } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) &&
 167                (!(s->fcr & UART_FCR_FE) ||
 168                 s->recv_fifo.count >= s->recv_fifo.itl)) {
 169         tmp_iir = UART_IIR_RDI;
 170     } else if ((s->ier & UART_IER_THRI) && s->thr_ipending) {
 171         tmp_iir = UART_IIR_THRI;
 172     } else if ((s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) {
 173         tmp_iir = UART_IIR_MSI;
 174     }
 175
 176     s->iir = tmp_iir | (s->iir & 0xF0);
 177
 178     if (tmp_iir != UART_IIR_NO_INT) {
 179         qemu_irq_raise(s->irq);
 180     } else {
 181         qemu_irq_lower(s->irq);
 182     }
 183 }
 184
 185 static void serial_update_parameters(SerialState *s)
 186 {
 187     int speed, parity, data_bits, stop_bits, frame_size;
 188     QEMUSerialSetParams ssp;
 189
 190     if (s->divider == 0)
 191         return;
 192
 193     /* Start bit. */
 194     frame_size = 1;
 195     if (s->lcr & 0x08) {
 196         /* Parity bit. */
 197         frame_size++;
 198         if (s->lcr & 0x10)
 199             parity = 'E';
 200         else
 201             parity = 'O';
 202     } else {
 203             parity = 'N';
 204     }
 205     if (s->lcr & 0x04)
 206         stop_bits = 2;
 207     else
 208         stop_bits = 1;
 209
 210     data_bits = (s->lcr & 0x03) + 5;
 211     frame_size += data_bits + stop_bits;
 212     speed = s->baudbase / s->divider;
 213     ssp.speed = speed;
 214     ssp.parity = parity;
 215     ssp.data_bits = data_bits;
 216     ssp.stop_bits = stop_bits;
 217     s->char_transmit_time =  (get_ticks_per_sec() / speed) * frame_size;
 218     qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 219
 220     DPRINTF("speed=%d parity=%c data=%d stop=%d\n",
 221            speed, parity, data_bits, stop_bits);
 222 }
 223
 224 static void serial_update_msl(SerialState *s)
 225 {
 226     uint8_t omsr;
 227     int flags;
 228
 229     qemu_del_timer(s->modem_status_poll);
 230
 231     if (qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) {
 232         s->poll_msl = -1;
 233         return;
 234     }
 235
 236     omsr = s->msr;
 237
 238     s->msr = (flags & CHR_TIOCM_CTS) ? s->msr | UART_MSR_CTS : s->msr & ~UART_MSR_CTS;
 239     s->msr = (flags & CHR_TIOCM_DSR) ? s->msr | UART_MSR_DSR : s->msr & ~UART_MSR_DSR;
 240     s->msr = (flags & CHR_TIOCM_CAR) ? s->msr | UART_MSR_DCD : s->msr & ~UART_MSR_DCD;
 241     s->msr = (flags & CHR_TIOCM_RI) ? s->msr | UART_MSR_RI : s->msr & ~UART_MSR_RI;
 242
 243     if (s->msr != omsr) {
 244          /* Set delta bits */
 245          s->msr = s->msr | ((s->msr >> 4) ^ (omsr >> 4));
 246          /* UART_MSR_TERI only if change was from 1 -> 0 */
 247          if ((s->msr & UART_MSR_TERI) && !(omsr & UART_MSR_RI))
 248              s->msr &= ~UART_MSR_TERI;
 249          serial_update_irq(s);
 250     }
 251
 252     /* The real 16550A apparently has a 250ns response latency to line status changes.
 253        We'll be lazy and poll only every 10ms, and only poll it at all if MSI interrupts are turned on */
 254
 255     if (s->poll_msl)
 256         qemu_mod_timer(s->modem_status_poll, qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 100);
 257 }
 258
 259 static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque)
 260 {
 261     SerialState *s = opaque;
 262
 263     if (s->tsr_retry <= 0) {
 264         if (s->fcr & UART_FCR_FE) {
 265             s->tsr = fifo_get(s,XMIT_FIFO);
 266             if (!s->xmit_fifo.count)
 267                 s->lsr |= UART_LSR_THRE;
 268         } else if ((s->lsr & UART_LSR_THRE)) {
 269             return FALSE;
 270         } else {
 271             s->tsr = s->thr;
 272             s->lsr |= UART_LSR_THRE;
 273             s->lsr &= ~UART_LSR_TEMT;
 274         }
 275     }
 276
 277     if (s->mcr & UART_MCR_LOOP) {
 278         /* in loopback mode, say that we just received a char */
 279         serial_receive1(s, &s->tsr, 1);
 280     } else if (qemu_chr_fe_write(s->chr, &s->tsr, 1) != 1) {
 281         if (s->tsr_retry >= 0 && s->tsr_retry < MAX_XMIT_RETRY &&
 282             qemu_chr_fe_add_watch(s->chr, G_IO_OUT, serial_xmit, s) > 0) {
 283             s->tsr_retry++;
 284             return FALSE;
 285         }
 286         s->tsr_retry = 0;
 287     } else {
 288         s->tsr_retry = 0;
 289     }
 290
 291     s->last_xmit_ts = qemu_get_clock_ns(vm_clock);
 292
 293     if (s->lsr & UART_LSR_THRE) {
 294         s->lsr |= UART_LSR_TEMT;
 295         s->thr_ipending = 1;
 296         serial_update_irq(s);
 297     }
 298
 299     return FALSE;
 300 }
 301
 302
 303 static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
 304                                 unsigned size)
 305 {
 306     SerialState *s = opaque;
 307
 308     addr &= 7;
 309     DPRINTF("write addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 "\n", addr, val);
 310     switch(addr) {
 311     default:
 312     case 0:
 313         if (s->lcr & UART_LCR_DLAB) {
 314             s->divider = (s->divider & 0xff00) | val;
 315             serial_update_parameters(s);
 316         } else {
 317             s->thr = (uint8_t) val;
 318             if(s->fcr & UART_FCR_FE) {
 319                 fifo_put(s, XMIT_FIFO, s->thr);
 320                 s->thr_ipending = 0;
 321                 s->lsr &= ~UART_LSR_TEMT;
 322                 s->lsr &= ~UART_LSR_THRE;
 323                 serial_update_irq(s);
 324             } else {
 325                 s->thr_ipending = 0;
 326                 s->lsr &= ~UART_LSR_THRE;
 327                 serial_update_irq(s);
 328             }
 329             serial_xmit(NULL, G_IO_OUT, s);
 330         }
 331         break;
 332     case 1:
 333         if (s->lcr & UART_LCR_DLAB) {
 334             s->divider = (s->divider & 0x00ff) | (val << 8);
 335             serial_update_parameters(s);
 336         } else {
 337             s->ier = val & 0x0f;
 338             /* If the backend device is a real serial port, turn polling of the modem
 339                status lines on physical port on or off depending on UART_IER_MSI state */
 340             if (s->poll_msl >= 0) {
 341                 if (s->ier & UART_IER_MSI) {
 342                      s->poll_msl = 1;
 343                      serial_update_msl(s);
 344                 } else {
 345                      qemu_del_timer(s->modem_status_poll);
 346                      s->poll_msl = 0;
 347                 }
 348             }
 349             if (s->lsr & UART_LSR_THRE) {
 350                 s->thr_ipending = 1;
 351                 serial_update_irq(s);
 352             }
 353         }
 354         break;
 355     case 2:
 356         val = val & 0xFF;
 357
 358         if (s->fcr == val)
 359             break;
 360
 361         /* Did the enable/disable flag change? If so, make sure FIFOs get flushed */
 362         if ((val ^ s->fcr) & UART_FCR_FE)
 363             val |= UART_FCR_XFR | UART_FCR_RFR;
 364
 365         /* FIFO clear */
 366
 367         if (val & UART_FCR_RFR) {
 368             qemu_del_timer(s->fifo_timeout_timer);
 369             s->timeout_ipending=0;
 370             fifo_clear(s,RECV_FIFO);
 371         }
 372
 373         if (val & UART_FCR_XFR) {
 374             fifo_clear(s,XMIT_FIFO);
 375         }
 376
 377         if (val & UART_FCR_FE) {
 378             s->iir |= UART_IIR_FE;
 379             /* Set RECV_FIFO trigger Level */
 380             switch (val & 0xC0) {
 381             case UART_FCR_ITL_1:
 382                 s->recv_fifo.itl = 1;
 383                 break;
 384             case UART_FCR_ITL_2:
 385                 s->recv_fifo.itl = 4;
 386                 break;
 387             case UART_FCR_ITL_3:
 388                 s->recv_fifo.itl = 8;
 389                 break;
 390             case UART_FCR_ITL_4:
 391                 s->recv_fifo.itl = 14;
 392                 break;
 393             }
 394         } else
 395             s->iir &= ~UART_IIR_FE;
 396
 397         /* Set fcr - or at least the bits in it that are supposed to "stick" */
 398         s->fcr = val & 0xC9;
 399         serial_update_irq(s);
 400         break;
 401     case 3:
 402         {
 403             int break_enable;
 404             s->lcr = val;
 405             serial_update_parameters(s);
 406             break_enable = (val >> 6) & 1;
 407             if (break_enable != s->last_break_enable) {
 408                 s->last_break_enable = break_enable;
 409                 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
 410                                &break_enable);
 411             }
 412         }
 413         break;
 414     case 4:
 415         {
 416             int flags;
 417             int old_mcr = s->mcr;
 418             s->mcr = val & 0x1f;
 419             if (val & UART_MCR_LOOP)
 420                 break;
 421
 422             if (s->poll_msl >= 0 && old_mcr != s->mcr) {
 423
 424                 qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
 425
 426                 flags &= ~(CHR_TIOCM_RTS | CHR_TIOCM_DTR);
 427
 428                 if (val & UART_MCR_RTS)
 429                     flags |= CHR_TIOCM_RTS;
 430                 if (val & UART_MCR_DTR)
 431                     flags |= CHR_TIOCM_DTR;
 432
 433                 qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
 434                 /* Update the modem status after a one-character-send wait-time, since there may be a response
 435                    from the device/computer at the other end of the serial line */
 436                 qemu_mod_timer(s->modem_status_poll, qemu_get_clock_ns(vm_clock) + s->char_transmit_time);
 437             }
 438         }
 439         break;
 440     case 5:
 441         break;
 442     case 6:
 443         break;
 444     case 7:
 445         s->scr = val;
 446         break;
 447     }
 448 }
 449
 450 static uint64_t serial_ioport_read(void *opaque, hwaddr addr, unsigned size)
 451 {
 452     SerialState *s = opaque;
 453     uint32_t ret;
 454
 455     addr &= 7;
 456     switch(addr) {
 457     default:
 458     case 0:
 459         if (s->lcr & UART_LCR_DLAB) {
 460             ret = s->divider & 0xff;
 461         } else {
 462             if(s->fcr & UART_FCR_FE) {
 463                 ret = fifo_get(s,RECV_FIFO);
 464                 if (s->recv_fifo.count == 0)
 465                     s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 466                 else
 467                     qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4);
 468                 s->timeout_ipending = 0;
 469             } else {
 470                 ret = s->rbr;
 471                 s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 472             }
 473             serial_update_irq(s);
 474             if (!(s->mcr & UART_MCR_LOOP)) {
 475                 /* in loopback mode, don't receive any data */
 476                 qemu_chr_accept_input(s->chr);
 477             }
 478         }
 479         break;
 480     case 1:
 481         if (s->lcr & UART_LCR_DLAB) {
 482             ret = (s->divider >> 8) & 0xff;
 483         } else {
 484             ret = s->ier;
 485         }
 486         break;
 487     case 2:
 488         ret = s->iir;
 489         if ((ret & UART_IIR_ID) == UART_IIR_THRI) {
 490             s->thr_ipending = 0;
 491             serial_update_irq(s);
 492         }
 493         break;
 494     case 3:
 495         ret = s->lcr;
 496         break;
 497     case 4:
 498         ret = s->mcr;
 499         break;
 500     case 5:
 501         ret = s->lsr;
 502         /* Clear break and overrun interrupts */
 503         if (s->lsr & (UART_LSR_BI|UART_LSR_OE)) {
 504             s->lsr &= ~(UART_LSR_BI|UART_LSR_OE);
 505             serial_update_irq(s);
 506         }
 507         break;
 508     case 6:
 509         if (s->mcr & UART_MCR_LOOP) {
 510             /* in loopback, the modem output pins are connected to the
 511                inputs */
 512             ret = (s->mcr & 0x0c) << 4;
 513             ret |= (s->mcr & 0x02) << 3;
 514             ret |= (s->mcr & 0x01) << 5;
 515         } else {
 516             if (s->poll_msl >= 0)
 517                 serial_update_msl(s);
 518             ret = s->msr;
 519             /* Clear delta bits & msr int after read, if they were set */
 520             if (s->msr & UART_MSR_ANY_DELTA) {
 521                 s->msr &= 0xF0;
 522                 serial_update_irq(s);
 523             }
 524         }
 525         break;
 526     case 7:
 527         ret = s->scr;
 528         break;
 529     }
 530     DPRINTF("read addr=0x%" HWADDR_PRIx " val=0x%02x\n", addr, ret);
 531     return ret;
 532 }
 533
 534 static int serial_can_receive(SerialState *s)
 535 {
 536     if(s->fcr & UART_FCR_FE) {
 537         if(s->recv_fifo.count < UART_FIFO_LENGTH)
 538         /* Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1 if above. If UART_FIFO_LENGTH - fifo.count is
 539         advertised the effect will be to almost always fill the fifo completely before the guest has a chance to respond,
 540         effectively overriding the ITL that the guest has set. */
 541              return (s->recv_fifo.count <= s->recv_fifo.itl) ? s->recv_fifo.itl - s->recv_fifo.count : 1;
 542         else
 543              return 0;
 544     } else {
 545     return !(s->lsr & UART_LSR_DR);
 546     }
 547 }
 548
 549 static void serial_receive_break(SerialState *s)
 550 {
 551     s->rbr = 0;
 552     /* When the LSR_DR is set a null byte is pushed into the fifo */
 553     fifo_put(s, RECV_FIFO, '\0');
 554     s->lsr |= UART_LSR_BI | UART_LSR_DR;
 555     serial_update_irq(s);
 556 }
 557
 558 /* There's data in recv_fifo and s->rbr has not been read for 4 char transmit times */
 559 static void fifo_timeout_int (void *opaque) {
 560     SerialState *s = opaque;
 561     if (s->recv_fifo.count) {
 562         s->timeout_ipending = 1;
 563         serial_update_irq(s);
 564     }
 565 }
 566
 567 static int serial_can_receive1(void *opaque)
 568 {
 569     SerialState *s = opaque;
 570     return serial_can_receive(s);
 571 }
 572
 573 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
 574 {
 575     SerialState *s = opaque;
 576
 577     if (s->wakeup) {
 578         qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
 579     }
 580     if(s->fcr & UART_FCR_FE) {
 581         int i;
 582         for (i = 0; i < size; i++) {
 583             fifo_put(s, RECV_FIFO, buf[i]);
 584         }
 585         s->lsr |= UART_LSR_DR;
 586         /* call the timeout receive callback in 4 char transmit time */
 587         qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4);
 588     } else {
 589         if (s->lsr & UART_LSR_DR)
 590             s->lsr |= UART_LSR_OE;
 591         s->rbr = buf[0];
 592         s->lsr |= UART_LSR_DR;
 593     }
 594     serial_update_irq(s);
 595 }
 596
 597 static void serial_event(void *opaque, int event)
 598 {
 599     SerialState *s = opaque;
 600     DPRINTF("event %x\n", event);
 601     if (event == CHR_EVENT_BREAK)
 602         serial_receive_break(s);
 603 }
 604
 605 static void serial_pre_save(void *opaque)
 606 {
 607     SerialState *s = opaque;
 608     s->fcr_vmstate = s->fcr;
 609 }
 610
 611 static int serial_post_load(void *opaque, int version_id)
 612 {
 613     SerialState *s = opaque;
 614
 615     if (version_id < 3) {
 616         s->fcr_vmstate = 0;
 617     }
 618     /* Initialize fcr via setter to perform essential side-effects */
 619     serial_ioport_write(s, 0x02, s->fcr_vmstate, 1);
 620     serial_update_parameters(s);
 621     return 0;
 622 }
 623
 624 const VMStateDescription vmstate_serial = {
 625     .name = "serial",
 626     .version_id = 3,
 627     .minimum_version_id = 2,
 628     .pre_save = serial_pre_save,
 629     .post_load = serial_post_load,
 630     .fields      = (VMStateField []) {
 631         VMSTATE_UINT16_V(divider, SerialState, 2),
 632         VMSTATE_UINT8(rbr, SerialState),
 633         VMSTATE_UINT8(ier, SerialState),
 634         VMSTATE_UINT8(iir, SerialState),
 635         VMSTATE_UINT8(lcr, SerialState),
 636         VMSTATE_UINT8(mcr, SerialState),
 637         VMSTATE_UINT8(lsr, SerialState),
 638         VMSTATE_UINT8(msr, SerialState),
 639         VMSTATE_UINT8(scr, SerialState),
 640         VMSTATE_UINT8_V(fcr_vmstate, SerialState, 3),
 641         VMSTATE_END_OF_LIST()
 642     }
 643 };
 644
 645 static void serial_reset(void *opaque)
 646 {
 647     SerialState *s = opaque;
 648
 649     s->rbr = 0;
 650     s->ier = 0;
 651     s->iir = UART_IIR_NO_INT;
 652     s->lcr = 0;
 653     s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
 654     s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS;
 655     /* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */
 656     s->divider = 0x0C;
 657     s->mcr = UART_MCR_OUT2;
 658     s->scr = 0;
 659     s->tsr_retry = 0;
 660     s->char_transmit_time = (get_ticks_per_sec() / 9600) * 10;
 661     s->poll_msl = 0;
 662
 663     fifo_clear(s,RECV_FIFO);
 664     fifo_clear(s,XMIT_FIFO);
 665
 666     s->last_xmit_ts = qemu_get_clock_ns(vm_clock);
 667
 668     s->thr_ipending = 0;
 669     s->last_break_enable = 0;
 670     qemu_irq_lower(s->irq);
 671 }
 672
 673 void serial_init_core(SerialState *s)
 674 {
 675     if (!s->chr) {
 676         fprintf(stderr, "Can't create serial device, empty char device\n");
 677         exit(1);
 678     }
 679
 680     s->modem_status_poll = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) serial_update_msl, s);
 681
 682     s->fifo_timeout_timer = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) fifo_timeout_int, s);
 683     qemu_register_reset(serial_reset, s);
 684
 685     qemu_chr_add_handlers(s->chr, serial_can_receive1, serial_receive1,
 686                           serial_event, s);
 687 }
 688
 689 void serial_exit_core(SerialState *s)
 690 {
 691     qemu_chr_add_handlers(s->chr, NULL, NULL, NULL, NULL);
 692     qemu_unregister_reset(serial_reset, s);
 693 }
 694
 695 /* Change the main reference oscillator frequency. */
 696 void serial_set_frequency(SerialState *s, uint32_t frequency)
 697 {
 698     s->baudbase = frequency;
 699     serial_update_parameters(s);
 700 }
 701
 702 const MemoryRegionOps serial_io_ops = {
 703     .read = serial_ioport_read,
 704     .write = serial_ioport_write,
 705     .impl = {
 706         .min_access_size = 1,
 707         .max_access_size = 1,
 708     },
 709     .endianness = DEVICE_LITTLE_ENDIAN,
 710 };
 711
 712 SerialState *serial_init(int base, qemu_irq irq, int baudbase,
 713                          CharDriverState *chr, MemoryRegion *system_io)
 714 {
 715     SerialState *s;
 716
 717     s = g_malloc0(sizeof(SerialState));
 718
 719     s->irq = irq;
 720     s->baudbase = baudbase;
 721     s->chr = chr;
 722     serial_init_core(s);
 723
 724     vmstate_register(NULL, base, &vmstate_serial, s);
 725
 726     memory_region_init_io(&s->io, &serial_io_ops, s, "serial", 8);
 727     memory_region_add_subregion(system_io, base, &s->io);
 728
 729     return s;
 730 }
 731
 732 /* Memory mapped interface */
 733 static uint64_t serial_mm_read(void *opaque, hwaddr addr,
 734                                unsigned size)
 735 {
 736     SerialState *s = opaque;
 737     return serial_ioport_read(s, addr >> s->it_shift, 1);
 738 }
 739
 740 static void serial_mm_write(void *opaque, hwaddr addr,
 741                             uint64_t value, unsigned size)
 742 {
 743     SerialState *s = opaque;
 744     value &= ~0u >> (32 - (size * 8));
 745     serial_ioport_write(s, addr >> s->it_shift, value, 1);
 746 }
 747
 748 static const MemoryRegionOps serial_mm_ops[3] = {
 749     [DEVICE_NATIVE_ENDIAN] = {
 750         .read = serial_mm_read,
 751         .write = serial_mm_write,
 752         .endianness = DEVICE_NATIVE_ENDIAN,
 753     },
 754     [DEVICE_LITTLE_ENDIAN] = {
 755         .read = serial_mm_read,
 756         .write = serial_mm_write,
 757         .endianness = DEVICE_LITTLE_ENDIAN,
 758     },
 759     [DEVICE_BIG_ENDIAN] = {
 760         .read = serial_mm_read,
 761         .write = serial_mm_write,
 762         .endianness = DEVICE_BIG_ENDIAN,
 763     },
 764 };
 765
 766 SerialState *serial_mm_init(MemoryRegion *address_space,
 767                             hwaddr base, int it_shift,
 768                             qemu_irq irq, int baudbase,
 769                             CharDriverState *chr, enum device_endian end)
 770 {
 771     SerialState *s;
 772
 773     s = g_malloc0(sizeof(SerialState));
 774
 775     s->it_shift = it_shift;
 776     s->irq = irq;
 777     s->baudbase = baudbase;
 778     s->chr = chr;
 779
 780     serial_init_core(s);
 781     vmstate_register(NULL, base, &vmstate_serial, s);
 782
 783     memory_region_init_io(&s->io, &serial_mm_ops[end], s,
 784                           "serial", 8 << it_shift);
 785     memory_region_add_subregion(address_space, base, &s->io);
 786
 787     serial_update_msl(s);
 788     return s;
 789 }