hw/char/etraxfs_ser.c

   1 /*
   2  * QEMU ETRAX System Emulator
   3  *
   4  * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB.
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "hw/sysbus.h"
  26 #include "sysemu/char.h"
  27 #include "qemu/log.h"
  28
  29 #define D(x)
  30
  31 #define RW_TR_CTRL     (0x00 / 4)
  32 #define RW_TR_DMA_EN   (0x04 / 4)
  33 #define RW_REC_CTRL    (0x08 / 4)
  34 #define RW_DOUT        (0x1c / 4)
  35 #define RS_STAT_DIN    (0x20 / 4)
  36 #define R_STAT_DIN     (0x24 / 4)
  37 #define RW_INTR_MASK   (0x2c / 4)
  38 #define RW_ACK_INTR    (0x30 / 4)
  39 #define R_INTR         (0x34 / 4)
  40 #define R_MASKED_INTR  (0x38 / 4)
  41 #define R_MAX          (0x3c / 4)
  42
  43 #define STAT_DAV     16
  44 #define STAT_TR_IDLE 22
  45 #define STAT_TR_RDY  24
  46
  47 #define TYPE_ETRAX_FS_SERIAL "etraxfs,serial"
  48 #define ETRAX_SERIAL(obj) \
  49     OBJECT_CHECK(ETRAXSerial, (obj), TYPE_ETRAX_FS_SERIAL)
  50
  51 typedef struct ETRAXSerial {
  52     SysBusDevice parent_obj;
  53
  54     MemoryRegion mmio;
  55     CharDriverState *chr;
  56     qemu_irq irq;
  57
  58     int pending_tx;
  59
  60     uint8_t rx_fifo[16];
  61     unsigned int rx_fifo_pos;
  62     unsigned int rx_fifo_len;
  63
  64     /* Control registers.  */
  65     uint32_t regs[R_MAX];
  66 } ETRAXSerial;
  67
  68 static void ser_update_irq(ETRAXSerial *s)
  69 {
  70
  71     if (s->rx_fifo_len) {
  72         s->regs[R_INTR] |= 8;
  73     } else {
  74         s->regs[R_INTR] &= ~8;
  75     }
  76
  77     s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK];
  78     qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]);
  79 }
  80
  81 static uint64_t
  82 ser_read(void *opaque, hwaddr addr, unsigned int size)
  83 {
  84     ETRAXSerial *s = opaque;
  85     uint32_t r = 0;
  86
  87     addr >>= 2;
  88     switch (addr)
  89     {
  90         case R_STAT_DIN:
  91             r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
  92             if (s->rx_fifo_len) {
  93                 r |= 1 << STAT_DAV;
  94             }
  95             r |= 1 << STAT_TR_RDY;
  96             r |= 1 << STAT_TR_IDLE;
  97             break;
  98         case RS_STAT_DIN:
  99             r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
 100             if (s->rx_fifo_len) {
 101                 r |= 1 << STAT_DAV;
 102                 s->rx_fifo_len--;
 103             }
 104             r |= 1 << STAT_TR_RDY;
 105             r |= 1 << STAT_TR_IDLE;
 106             break;
 107         default:
 108             r = s->regs[addr];
 109             D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, r));
 110             break;
 111     }
 112     return r;
 113 }
 114
 115 static void
 116 ser_write(void *opaque, hwaddr addr,
 117           uint64_t val64, unsigned int size)
 118 {
 119     ETRAXSerial *s = opaque;
 120     uint32_t value = val64;
 121     unsigned char ch = val64;
 122
 123     D(qemu_log("%s " TARGET_FMT_plx "=%x\n",  __func__, addr, value));
 124     addr >>= 2;
 125     switch (addr)
 126     {
 127         case RW_DOUT:
 128             qemu_chr_fe_write(s->chr, &ch, 1);
 129             s->regs[R_INTR] |= 3;
 130             s->pending_tx = 1;
 131             s->regs[addr] = value;
 132             break;
 133         case RW_ACK_INTR:
 134             if (s->pending_tx) {
 135                 value &= ~1;
 136                 s->pending_tx = 0;
 137                 D(qemu_log("fixedup value=%x r_intr=%x\n",
 138                            value, s->regs[R_INTR]));
 139             }
 140             s->regs[addr] = value;
 141             s->regs[R_INTR] &= ~value;
 142             D(printf("r_intr=%x\n", s->regs[R_INTR]));
 143             break;
 144         default:
 145             s->regs[addr] = value;
 146             break;
 147     }
 148     ser_update_irq(s);
 149 }
 150
 151 static const MemoryRegionOps ser_ops = {
 152     .read = ser_read,
 153     .write = ser_write,
 154     .endianness = DEVICE_NATIVE_ENDIAN,
 155     .valid = {
 156         .min_access_size = 4,
 157         .max_access_size = 4
 158     }
 159 };
 160
 161 static void serial_receive(void *opaque, const uint8_t *buf, int size)
 162 {
 163     ETRAXSerial *s = opaque;
 164     int i;
 165
 166     /* Got a byte.  */
 167     if (s->rx_fifo_len >= 16) {
 168         D(qemu_log("WARNING: UART dropped char.\n"));
 169         return;
 170     }
 171
 172     for (i = 0; i < size; i++) {
 173         s->rx_fifo[s->rx_fifo_pos] = buf[i];
 174         s->rx_fifo_pos++;
 175         s->rx_fifo_pos &= 15;
 176         s->rx_fifo_len++;
 177     }
 178
 179     ser_update_irq(s);
 180 }
 181
 182 static int serial_can_receive(void *opaque)
 183 {
 184     ETRAXSerial *s = opaque;
 185
 186     /* Is the receiver enabled?  */
 187     if (!(s->regs[RW_REC_CTRL] & (1 << 3))) {
 188         return 0;
 189     }
 190
 191     return sizeof(s->rx_fifo) - s->rx_fifo_len;
 192 }
 193
 194 static void serial_event(void *opaque, int event)
 195 {
 196
 197 }
 198
 199 static void etraxfs_ser_reset(DeviceState *d)
 200 {
 201     ETRAXSerial *s = ETRAX_SERIAL(d);
 202
 203     /* transmitter begins ready and idle.  */
 204     s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY);
 205     s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE);
 206
 207     s->regs[RW_REC_CTRL] = 0x10000;
 208
 209 }
 210
 211 static int etraxfs_ser_init(SysBusDevice *dev)
 212 {
 213     ETRAXSerial *s = ETRAX_SERIAL(dev);
 214
 215     sysbus_init_irq(dev, &s->irq);
 216     memory_region_init_io(&s->mmio, OBJECT(s), &ser_ops, s,
 217                           "etraxfs-serial", R_MAX * 4);
 218     sysbus_init_mmio(dev, &s->mmio);
 219
 220     /* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
 221     s->chr = qemu_char_get_next_serial();
 222     if (s->chr) {
 223         qemu_chr_add_handlers(s->chr,
 224                               serial_can_receive, serial_receive,
 225                               serial_event, s);
 226     }
 227     return 0;
 228 }
 229
 230 static void etraxfs_ser_class_init(ObjectClass *klass, void *data)
 231 {
 232     DeviceClass *dc = DEVICE_CLASS(klass);
 233     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 234
 235     k->init = etraxfs_ser_init;
 236     dc->reset = etraxfs_ser_reset;
 237     /* Reason: init() method uses qemu_char_get_next_serial() */
 238     dc->cannot_instantiate_with_device_add_yet = true;
 239 }
 240
 241 static const TypeInfo etraxfs_ser_info = {
 242     .name          = TYPE_ETRAX_FS_SERIAL,
 243     .parent        = TYPE_SYS_BUS_DEVICE,
 244     .instance_size = sizeof(ETRAXSerial),
 245     .class_init    = etraxfs_ser_class_init,
 246 };
 247
 248 static void etraxfs_serial_register_types(void)
 249 {
 250     type_register_static(&etraxfs_ser_info);
 251 }
 252
 253 type_init(etraxfs_serial_register_types)