sun4m: fix slavio timer RUN/STOP bit
[qemu/ar7.git] / block.c
blob2fd54825728e4befd323e913a49b7a5f128f5a7d
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 QEMU_CLOCK_VIRTUAL,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
185 bs);
186 bs->io_limits_enabled = true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195 unsigned int bytes,
196 bool is_write)
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 /* if must wait or any request of this type throttled queue the IO */
202 if (must_wait ||
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state, is_write, bytes);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
213 return;
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 if (!bs || !bs->drv) {
223 /* 4k should be on the safe side */
224 return 4096;
227 return bs->bl.opt_mem_alignment;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
233 const char *p;
235 #ifdef _WIN32
236 if (is_windows_drive(path) ||
237 is_windows_drive_prefix(path)) {
238 return 0;
240 p = path + strcspn(path, ":/\\");
241 #else
242 p = path + strcspn(path, ":/");
243 #endif
245 return *p == ':';
248 int path_is_absolute(const char *path)
250 #ifdef _WIN32
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
253 return 1;
255 return (*path == '/' || *path == '\\');
256 #else
257 return (*path == '/');
258 #endif
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
263 supported. */
264 void path_combine(char *dest, int dest_size,
265 const char *base_path,
266 const char *filename)
268 const char *p, *p1;
269 int len;
271 if (dest_size <= 0)
272 return;
273 if (path_is_absolute(filename)) {
274 pstrcpy(dest, dest_size, filename);
275 } else {
276 p = strchr(base_path, ':');
277 if (p)
278 p++;
279 else
280 p = base_path;
281 p1 = strrchr(base_path, '/');
282 #ifdef _WIN32
284 const char *p2;
285 p2 = strrchr(base_path, '\\');
286 if (!p1 || p2 > p1)
287 p1 = p2;
289 #endif
290 if (p1)
291 p1++;
292 else
293 p1 = base_path;
294 if (p1 > p)
295 p = p1;
296 len = p - base_path;
297 if (len > dest_size - 1)
298 len = dest_size - 1;
299 memcpy(dest, base_path, len);
300 dest[len] = '\0';
301 pstrcat(dest, dest_size, filename);
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308 pstrcpy(dest, sz, bs->backing_file);
309 } else {
310 path_combine(dest, sz, bs->filename, bs->backing_file);
314 void bdrv_register(BlockDriver *bdrv)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv->bdrv_co_readv) {
318 bdrv->bdrv_co_readv = bdrv_co_readv_em;
319 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv->bdrv_aio_readv) {
325 /* add AIO emulation layer */
326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name)
337 BlockDriverState *bs;
339 bs = g_malloc0(sizeof(BlockDriverState));
340 QLIST_INIT(&bs->dirty_bitmaps);
341 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
342 if (device_name[0] != '\0') {
343 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
345 bdrv_iostatus_disable(bs);
346 notifier_list_init(&bs->close_notifiers);
347 notifier_with_return_list_init(&bs->before_write_notifiers);
348 qemu_co_queue_init(&bs->throttled_reqs[0]);
349 qemu_co_queue_init(&bs->throttled_reqs[1]);
350 bs->refcnt = 1;
352 return bs;
355 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
357 notifier_list_add(&bs->close_notifiers, notify);
360 BlockDriver *bdrv_find_format(const char *format_name)
362 BlockDriver *drv1;
363 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
364 if (!strcmp(drv1->format_name, format_name)) {
365 return drv1;
368 return NULL;
371 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
373 static const char *whitelist_rw[] = {
374 CONFIG_BDRV_RW_WHITELIST
376 static const char *whitelist_ro[] = {
377 CONFIG_BDRV_RO_WHITELIST
379 const char **p;
381 if (!whitelist_rw[0] && !whitelist_ro[0]) {
382 return 1; /* no whitelist, anything goes */
385 for (p = whitelist_rw; *p; p++) {
386 if (!strcmp(drv->format_name, *p)) {
387 return 1;
390 if (read_only) {
391 for (p = whitelist_ro; *p; p++) {
392 if (!strcmp(drv->format_name, *p)) {
393 return 1;
397 return 0;
400 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
401 bool read_only)
403 BlockDriver *drv = bdrv_find_format(format_name);
404 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
407 typedef struct CreateCo {
408 BlockDriver *drv;
409 char *filename;
410 QEMUOptionParameter *options;
411 int ret;
412 Error *err;
413 } CreateCo;
415 static void coroutine_fn bdrv_create_co_entry(void *opaque)
417 Error *local_err = NULL;
418 int ret;
420 CreateCo *cco = opaque;
421 assert(cco->drv);
423 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
424 if (local_err) {
425 error_propagate(&cco->err, local_err);
427 cco->ret = ret;
430 int bdrv_create(BlockDriver *drv, const char* filename,
431 QEMUOptionParameter *options, Error **errp)
433 int ret;
435 Coroutine *co;
436 CreateCo cco = {
437 .drv = drv,
438 .filename = g_strdup(filename),
439 .options = options,
440 .ret = NOT_DONE,
441 .err = NULL,
444 if (!drv->bdrv_create) {
445 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
446 ret = -ENOTSUP;
447 goto out;
450 if (qemu_in_coroutine()) {
451 /* Fast-path if already in coroutine context */
452 bdrv_create_co_entry(&cco);
453 } else {
454 co = qemu_coroutine_create(bdrv_create_co_entry);
455 qemu_coroutine_enter(co, &cco);
456 while (cco.ret == NOT_DONE) {
457 qemu_aio_wait();
461 ret = cco.ret;
462 if (ret < 0) {
463 if (cco.err) {
464 error_propagate(errp, cco.err);
465 } else {
466 error_setg_errno(errp, -ret, "Could not create image");
470 out:
471 g_free(cco.filename);
472 return ret;
475 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
476 Error **errp)
478 BlockDriver *drv;
479 Error *local_err = NULL;
480 int ret;
482 drv = bdrv_find_protocol(filename, true);
483 if (drv == NULL) {
484 error_setg(errp, "Could not find protocol for file '%s'", filename);
485 return -ENOENT;
488 ret = bdrv_create(drv, filename, options, &local_err);
489 if (local_err) {
490 error_propagate(errp, local_err);
492 return ret;
495 int bdrv_refresh_limits(BlockDriverState *bs)
497 BlockDriver *drv = bs->drv;
499 memset(&bs->bl, 0, sizeof(bs->bl));
501 if (!drv) {
502 return 0;
505 /* Take some limits from the children as a default */
506 if (bs->file) {
507 bdrv_refresh_limits(bs->file);
508 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
509 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
510 } else {
511 bs->bl.opt_mem_alignment = 512;
514 if (bs->backing_hd) {
515 bdrv_refresh_limits(bs->backing_hd);
516 bs->bl.opt_transfer_length =
517 MAX(bs->bl.opt_transfer_length,
518 bs->backing_hd->bl.opt_transfer_length);
519 bs->bl.opt_mem_alignment =
520 MAX(bs->bl.opt_mem_alignment,
521 bs->backing_hd->bl.opt_mem_alignment);
524 /* Then let the driver override it */
525 if (drv->bdrv_refresh_limits) {
526 return drv->bdrv_refresh_limits(bs);
529 return 0;
533 * Create a uniquely-named empty temporary file.
534 * Return 0 upon success, otherwise a negative errno value.
536 int get_tmp_filename(char *filename, int size)
538 #ifdef _WIN32
539 char temp_dir[MAX_PATH];
540 /* GetTempFileName requires that its output buffer (4th param)
541 have length MAX_PATH or greater. */
542 assert(size >= MAX_PATH);
543 return (GetTempPath(MAX_PATH, temp_dir)
544 && GetTempFileName(temp_dir, "qem", 0, filename)
545 ? 0 : -GetLastError());
546 #else
547 int fd;
548 const char *tmpdir;
549 tmpdir = getenv("TMPDIR");
550 if (!tmpdir)
551 tmpdir = "/tmp";
552 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
553 return -EOVERFLOW;
555 fd = mkstemp(filename);
556 if (fd < 0) {
557 return -errno;
559 if (close(fd) != 0) {
560 unlink(filename);
561 return -errno;
563 return 0;
564 #endif
568 * Detect host devices. By convention, /dev/cdrom[N] is always
569 * recognized as a host CDROM.
571 static BlockDriver *find_hdev_driver(const char *filename)
573 int score_max = 0, score;
574 BlockDriver *drv = NULL, *d;
576 QLIST_FOREACH(d, &bdrv_drivers, list) {
577 if (d->bdrv_probe_device) {
578 score = d->bdrv_probe_device(filename);
579 if (score > score_max) {
580 score_max = score;
581 drv = d;
586 return drv;
589 BlockDriver *bdrv_find_protocol(const char *filename,
590 bool allow_protocol_prefix)
592 BlockDriver *drv1;
593 char protocol[128];
594 int len;
595 const char *p;
597 /* TODO Drivers without bdrv_file_open must be specified explicitly */
600 * XXX(hch): we really should not let host device detection
601 * override an explicit protocol specification, but moving this
602 * later breaks access to device names with colons in them.
603 * Thanks to the brain-dead persistent naming schemes on udev-
604 * based Linux systems those actually are quite common.
606 drv1 = find_hdev_driver(filename);
607 if (drv1) {
608 return drv1;
611 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
612 return bdrv_find_format("file");
615 p = strchr(filename, ':');
616 assert(p != NULL);
617 len = p - filename;
618 if (len > sizeof(protocol) - 1)
619 len = sizeof(protocol) - 1;
620 memcpy(protocol, filename, len);
621 protocol[len] = '\0';
622 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
623 if (drv1->protocol_name &&
624 !strcmp(drv1->protocol_name, protocol)) {
625 return drv1;
628 return NULL;
631 static int find_image_format(BlockDriverState *bs, const char *filename,
632 BlockDriver **pdrv, Error **errp)
634 int score, score_max;
635 BlockDriver *drv1, *drv;
636 uint8_t buf[2048];
637 int ret = 0;
639 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
640 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
641 drv = bdrv_find_format("raw");
642 if (!drv) {
643 error_setg(errp, "Could not find raw image format");
644 ret = -ENOENT;
646 *pdrv = drv;
647 return ret;
650 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
651 if (ret < 0) {
652 error_setg_errno(errp, -ret, "Could not read image for determining its "
653 "format");
654 *pdrv = NULL;
655 return ret;
658 score_max = 0;
659 drv = NULL;
660 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
661 if (drv1->bdrv_probe) {
662 score = drv1->bdrv_probe(buf, ret, filename);
663 if (score > score_max) {
664 score_max = score;
665 drv = drv1;
669 if (!drv) {
670 error_setg(errp, "Could not determine image format: No compatible "
671 "driver found");
672 ret = -ENOENT;
674 *pdrv = drv;
675 return ret;
679 * Set the current 'total_sectors' value
681 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
683 BlockDriver *drv = bs->drv;
685 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
686 if (bs->sg)
687 return 0;
689 /* query actual device if possible, otherwise just trust the hint */
690 if (drv->bdrv_getlength) {
691 int64_t length = drv->bdrv_getlength(bs);
692 if (length < 0) {
693 return length;
695 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
698 bs->total_sectors = hint;
699 return 0;
703 * Set open flags for a given discard mode
705 * Return 0 on success, -1 if the discard mode was invalid.
707 int bdrv_parse_discard_flags(const char *mode, int *flags)
709 *flags &= ~BDRV_O_UNMAP;
711 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
712 /* do nothing */
713 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
714 *flags |= BDRV_O_UNMAP;
715 } else {
716 return -1;
719 return 0;
723 * Set open flags for a given cache mode
725 * Return 0 on success, -1 if the cache mode was invalid.
727 int bdrv_parse_cache_flags(const char *mode, int *flags)
729 *flags &= ~BDRV_O_CACHE_MASK;
731 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
732 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
733 } else if (!strcmp(mode, "directsync")) {
734 *flags |= BDRV_O_NOCACHE;
735 } else if (!strcmp(mode, "writeback")) {
736 *flags |= BDRV_O_CACHE_WB;
737 } else if (!strcmp(mode, "unsafe")) {
738 *flags |= BDRV_O_CACHE_WB;
739 *flags |= BDRV_O_NO_FLUSH;
740 } else if (!strcmp(mode, "writethrough")) {
741 /* this is the default */
742 } else {
743 return -1;
746 return 0;
750 * The copy-on-read flag is actually a reference count so multiple users may
751 * use the feature without worrying about clobbering its previous state.
752 * Copy-on-read stays enabled until all users have called to disable it.
754 void bdrv_enable_copy_on_read(BlockDriverState *bs)
756 bs->copy_on_read++;
759 void bdrv_disable_copy_on_read(BlockDriverState *bs)
761 assert(bs->copy_on_read > 0);
762 bs->copy_on_read--;
765 static int bdrv_open_flags(BlockDriverState *bs, int flags)
767 int open_flags = flags | BDRV_O_CACHE_WB;
770 * Clear flags that are internal to the block layer before opening the
771 * image.
773 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
776 * Snapshots should be writable.
778 if (bs->is_temporary) {
779 open_flags |= BDRV_O_RDWR;
782 return open_flags;
785 static int bdrv_assign_node_name(BlockDriverState *bs,
786 const char *node_name,
787 Error **errp)
789 if (!node_name) {
790 return 0;
793 /* empty string node name is invalid */
794 if (node_name[0] == '\0') {
795 error_setg(errp, "Empty node name");
796 return -EINVAL;
799 /* takes care of avoiding namespaces collisions */
800 if (bdrv_find(node_name)) {
801 error_setg(errp, "node-name=%s is conflicting with a device id",
802 node_name);
803 return -EINVAL;
806 /* takes care of avoiding duplicates node names */
807 if (bdrv_find_node(node_name)) {
808 error_setg(errp, "Duplicate node name");
809 return -EINVAL;
812 /* copy node name into the bs and insert it into the graph list */
813 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
814 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
816 return 0;
820 * Common part for opening disk images and files
822 * Removes all processed options from *options.
824 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
825 QDict *options, int flags, BlockDriver *drv, Error **errp)
827 int ret, open_flags;
828 const char *filename;
829 const char *node_name = NULL;
830 Error *local_err = NULL;
832 assert(drv != NULL);
833 assert(bs->file == NULL);
834 assert(options != NULL && bs->options != options);
836 if (file != NULL) {
837 filename = file->filename;
838 } else {
839 filename = qdict_get_try_str(options, "filename");
842 if (drv->bdrv_needs_filename && !filename) {
843 error_setg(errp, "The '%s' block driver requires a file name",
844 drv->format_name);
845 return -EINVAL;
848 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
850 node_name = qdict_get_try_str(options, "node-name");
851 ret = bdrv_assign_node_name(bs, node_name, errp);
852 if (ret < 0) {
853 return ret;
855 qdict_del(options, "node-name");
857 /* bdrv_open() with directly using a protocol as drv. This layer is already
858 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
859 * and return immediately. */
860 if (file != NULL && drv->bdrv_file_open) {
861 bdrv_swap(file, bs);
862 return 0;
865 bs->open_flags = flags;
866 bs->guest_block_size = 512;
867 bs->request_alignment = 512;
868 bs->zero_beyond_eof = true;
869 open_flags = bdrv_open_flags(bs, flags);
870 bs->read_only = !(open_flags & BDRV_O_RDWR);
872 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
873 error_setg(errp,
874 !bs->read_only && bdrv_is_whitelisted(drv, true)
875 ? "Driver '%s' can only be used for read-only devices"
876 : "Driver '%s' is not whitelisted",
877 drv->format_name);
878 return -ENOTSUP;
881 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
882 if (flags & BDRV_O_COPY_ON_READ) {
883 if (!bs->read_only) {
884 bdrv_enable_copy_on_read(bs);
885 } else {
886 error_setg(errp, "Can't use copy-on-read on read-only device");
887 return -EINVAL;
891 if (filename != NULL) {
892 pstrcpy(bs->filename, sizeof(bs->filename), filename);
893 } else {
894 bs->filename[0] = '\0';
897 bs->drv = drv;
898 bs->opaque = g_malloc0(drv->instance_size);
900 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
902 /* Open the image, either directly or using a protocol */
903 if (drv->bdrv_file_open) {
904 assert(file == NULL);
905 assert(!drv->bdrv_needs_filename || filename != NULL);
906 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
907 } else {
908 if (file == NULL) {
909 error_setg(errp, "Can't use '%s' as a block driver for the "
910 "protocol level", drv->format_name);
911 ret = -EINVAL;
912 goto free_and_fail;
914 bs->file = file;
915 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
918 if (ret < 0) {
919 if (local_err) {
920 error_propagate(errp, local_err);
921 } else if (bs->filename[0]) {
922 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
923 } else {
924 error_setg_errno(errp, -ret, "Could not open image");
926 goto free_and_fail;
929 ret = refresh_total_sectors(bs, bs->total_sectors);
930 if (ret < 0) {
931 error_setg_errno(errp, -ret, "Could not refresh total sector count");
932 goto free_and_fail;
935 bdrv_refresh_limits(bs);
936 assert(bdrv_opt_mem_align(bs) != 0);
937 assert(bs->request_alignment != 0);
939 #ifndef _WIN32
940 if (bs->is_temporary) {
941 assert(bs->filename[0] != '\0');
942 unlink(bs->filename);
944 #endif
945 return 0;
947 free_and_fail:
948 bs->file = NULL;
949 g_free(bs->opaque);
950 bs->opaque = NULL;
951 bs->drv = NULL;
952 return ret;
956 * Opens a file using a protocol (file, host_device, nbd, ...)
958 * options is an indirect pointer to a QDict of options to pass to the block
959 * drivers, or pointer to NULL for an empty set of options. If this function
960 * takes ownership of the QDict reference, it will set *options to NULL;
961 * otherwise, it will contain unused/unrecognized options after this function
962 * returns. Then, the caller is responsible for freeing it. If it intends to
963 * reuse the QDict, QINCREF() should be called beforehand.
965 static int bdrv_file_open(BlockDriverState *bs, const char *filename,
966 QDict **options, int flags, Error **errp)
968 BlockDriver *drv;
969 const char *drvname;
970 bool allow_protocol_prefix = false;
971 Error *local_err = NULL;
972 int ret;
974 /* Fetch the file name from the options QDict if necessary */
975 if (!filename) {
976 filename = qdict_get_try_str(*options, "filename");
977 } else if (filename && !qdict_haskey(*options, "filename")) {
978 qdict_put(*options, "filename", qstring_from_str(filename));
979 allow_protocol_prefix = true;
980 } else {
981 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
982 "same time");
983 ret = -EINVAL;
984 goto fail;
987 /* Find the right block driver */
988 drvname = qdict_get_try_str(*options, "driver");
989 if (drvname) {
990 drv = bdrv_find_format(drvname);
991 if (!drv) {
992 error_setg(errp, "Unknown driver '%s'", drvname);
994 qdict_del(*options, "driver");
995 } else if (filename) {
996 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
997 if (!drv) {
998 error_setg(errp, "Unknown protocol");
1000 } else {
1001 error_setg(errp, "Must specify either driver or file");
1002 drv = NULL;
1005 if (!drv) {
1006 /* errp has been set already */
1007 ret = -ENOENT;
1008 goto fail;
1011 /* Parse the filename and open it */
1012 if (drv->bdrv_parse_filename && filename) {
1013 drv->bdrv_parse_filename(filename, *options, &local_err);
1014 if (local_err) {
1015 error_propagate(errp, local_err);
1016 ret = -EINVAL;
1017 goto fail;
1019 qdict_del(*options, "filename");
1022 if (!drv->bdrv_file_open) {
1023 ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err);
1024 *options = NULL;
1025 } else {
1026 ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err);
1028 if (ret < 0) {
1029 error_propagate(errp, local_err);
1030 goto fail;
1033 bs->growable = 1;
1034 return 0;
1036 fail:
1037 return ret;
1041 * Opens the backing file for a BlockDriverState if not yet open
1043 * options is a QDict of options to pass to the block drivers, or NULL for an
1044 * empty set of options. The reference to the QDict is transferred to this
1045 * function (even on failure), so if the caller intends to reuse the dictionary,
1046 * it needs to use QINCREF() before calling bdrv_file_open.
1048 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1050 char backing_filename[PATH_MAX];
1051 int back_flags, ret;
1052 BlockDriver *back_drv = NULL;
1053 Error *local_err = NULL;
1055 if (bs->backing_hd != NULL) {
1056 QDECREF(options);
1057 return 0;
1060 /* NULL means an empty set of options */
1061 if (options == NULL) {
1062 options = qdict_new();
1065 bs->open_flags &= ~BDRV_O_NO_BACKING;
1066 if (qdict_haskey(options, "file.filename")) {
1067 backing_filename[0] = '\0';
1068 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1069 QDECREF(options);
1070 return 0;
1071 } else {
1072 bdrv_get_full_backing_filename(bs, backing_filename,
1073 sizeof(backing_filename));
1076 if (bs->backing_format[0] != '\0') {
1077 back_drv = bdrv_find_format(bs->backing_format);
1080 /* backing files always opened read-only */
1081 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1082 BDRV_O_COPY_ON_READ);
1084 assert(bs->backing_hd == NULL);
1085 ret = bdrv_open(&bs->backing_hd,
1086 *backing_filename ? backing_filename : NULL, NULL, options,
1087 back_flags, back_drv, &local_err);
1088 if (ret < 0) {
1089 bs->backing_hd = NULL;
1090 bs->open_flags |= BDRV_O_NO_BACKING;
1091 error_setg(errp, "Could not open backing file: %s",
1092 error_get_pretty(local_err));
1093 error_free(local_err);
1094 return ret;
1097 if (bs->backing_hd->file) {
1098 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1099 bs->backing_hd->file->filename);
1102 /* Recalculate the BlockLimits with the backing file */
1103 bdrv_refresh_limits(bs);
1105 return 0;
1109 * Opens a disk image whose options are given as BlockdevRef in another block
1110 * device's options.
1112 * If allow_none is true, no image will be opened if filename is false and no
1113 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1115 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1116 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1117 * itself, all options starting with "${bdref_key}." are considered part of the
1118 * BlockdevRef.
1120 * The BlockdevRef will be removed from the options QDict.
1122 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1124 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1125 QDict *options, const char *bdref_key, int flags,
1126 bool allow_none, Error **errp)
1128 QDict *image_options;
1129 int ret;
1130 char *bdref_key_dot;
1131 const char *reference;
1133 assert(pbs);
1134 assert(*pbs == NULL);
1136 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1137 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1138 g_free(bdref_key_dot);
1140 reference = qdict_get_try_str(options, bdref_key);
1141 if (!filename && !reference && !qdict_size(image_options)) {
1142 if (allow_none) {
1143 ret = 0;
1144 } else {
1145 error_setg(errp, "A block device must be specified for \"%s\"",
1146 bdref_key);
1147 ret = -EINVAL;
1149 goto done;
1152 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1154 done:
1155 qdict_del(options, bdref_key);
1156 return ret;
1160 * Opens a disk image (raw, qcow2, vmdk, ...)
1162 * options is a QDict of options to pass to the block drivers, or NULL for an
1163 * empty set of options. The reference to the QDict belongs to the block layer
1164 * after the call (even on failure), so if the caller intends to reuse the
1165 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1167 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1168 * If it is not NULL, the referenced BDS will be reused.
1170 * The reference parameter may be used to specify an existing block device which
1171 * should be opened. If specified, neither options nor a filename may be given,
1172 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1174 int bdrv_open(BlockDriverState **pbs, const char *filename,
1175 const char *reference, QDict *options, int flags,
1176 BlockDriver *drv, Error **errp)
1178 int ret;
1179 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1180 char tmp_filename[PATH_MAX + 1];
1181 BlockDriverState *file = NULL, *bs;
1182 const char *drvname;
1183 Error *local_err = NULL;
1185 assert(pbs);
1187 if (reference) {
1188 bool options_non_empty = options ? qdict_size(options) : false;
1189 QDECREF(options);
1191 if (*pbs) {
1192 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1193 "another block device");
1194 return -EINVAL;
1197 if (filename || options_non_empty) {
1198 error_setg(errp, "Cannot reference an existing block device with "
1199 "additional options or a new filename");
1200 return -EINVAL;
1203 bs = bdrv_lookup_bs(reference, reference, errp);
1204 if (!bs) {
1205 return -ENODEV;
1207 bdrv_ref(bs);
1208 *pbs = bs;
1209 return 0;
1212 if (*pbs) {
1213 bs = *pbs;
1214 } else {
1215 bs = bdrv_new("");
1218 /* NULL means an empty set of options */
1219 if (options == NULL) {
1220 options = qdict_new();
1223 bs->options = options;
1224 options = qdict_clone_shallow(options);
1226 if (flags & BDRV_O_PROTOCOL) {
1227 assert(!drv);
1228 ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL,
1229 &local_err);
1230 if (!ret) {
1231 goto done;
1232 } else if (bs->drv) {
1233 goto close_and_fail;
1234 } else {
1235 goto fail;
1239 /* For snapshot=on, create a temporary qcow2 overlay */
1240 if (flags & BDRV_O_SNAPSHOT) {
1241 BlockDriverState *bs1;
1242 int64_t total_size;
1243 BlockDriver *bdrv_qcow2;
1244 QEMUOptionParameter *create_options;
1245 QDict *snapshot_options;
1247 /* if snapshot, we create a temporary backing file and open it
1248 instead of opening 'filename' directly */
1250 /* Get the required size from the image */
1251 QINCREF(options);
1252 bs1 = NULL;
1253 ret = bdrv_open(&bs1, filename, NULL, options, BDRV_O_NO_BACKING,
1254 drv, &local_err);
1255 if (ret < 0) {
1256 goto fail;
1258 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1260 bdrv_unref(bs1);
1262 /* Create the temporary image */
1263 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1264 if (ret < 0) {
1265 error_setg_errno(errp, -ret, "Could not get temporary filename");
1266 goto fail;
1269 bdrv_qcow2 = bdrv_find_format("qcow2");
1270 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1271 NULL);
1273 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1275 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1276 free_option_parameters(create_options);
1277 if (ret < 0) {
1278 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1279 "'%s': %s", tmp_filename,
1280 error_get_pretty(local_err));
1281 error_free(local_err);
1282 local_err = NULL;
1283 goto fail;
1286 /* Prepare a new options QDict for the temporary file, where user
1287 * options refer to the backing file */
1288 if (filename) {
1289 qdict_put(options, "file.filename", qstring_from_str(filename));
1291 if (drv) {
1292 qdict_put(options, "driver", qstring_from_str(drv->format_name));
1295 snapshot_options = qdict_new();
1296 qdict_put(snapshot_options, "backing", options);
1297 qdict_flatten(snapshot_options);
1299 bs->options = snapshot_options;
1300 options = qdict_clone_shallow(bs->options);
1302 filename = tmp_filename;
1303 drv = bdrv_qcow2;
1304 bs->is_temporary = 1;
1307 /* Open image file without format layer */
1308 if (flags & BDRV_O_RDWR) {
1309 flags |= BDRV_O_ALLOW_RDWR;
1312 assert(file == NULL);
1313 ret = bdrv_open_image(&file, filename, options, "file",
1314 bdrv_open_flags(bs, flags | BDRV_O_UNMAP) |
1315 BDRV_O_PROTOCOL, true, &local_err);
1316 if (ret < 0) {
1317 goto fail;
1320 /* Find the right image format driver */
1321 drvname = qdict_get_try_str(options, "driver");
1322 if (drvname) {
1323 drv = bdrv_find_format(drvname);
1324 qdict_del(options, "driver");
1325 if (!drv) {
1326 error_setg(errp, "Invalid driver: '%s'", drvname);
1327 ret = -EINVAL;
1328 goto unlink_and_fail;
1332 if (!drv) {
1333 if (file) {
1334 ret = find_image_format(file, filename, &drv, &local_err);
1335 } else {
1336 error_setg(errp, "Must specify either driver or file");
1337 ret = -EINVAL;
1338 goto unlink_and_fail;
1342 if (!drv) {
1343 goto unlink_and_fail;
1346 /* Open the image */
1347 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1348 if (ret < 0) {
1349 goto unlink_and_fail;
1352 if (file && (bs->file != file)) {
1353 bdrv_unref(file);
1354 file = NULL;
1357 /* If there is a backing file, use it */
1358 if ((flags & BDRV_O_NO_BACKING) == 0) {
1359 QDict *backing_options;
1361 qdict_extract_subqdict(options, &backing_options, "backing.");
1362 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1363 if (ret < 0) {
1364 goto close_and_fail;
1368 done:
1369 /* Check if any unknown options were used */
1370 if (options && (qdict_size(options) != 0)) {
1371 const QDictEntry *entry = qdict_first(options);
1372 if (flags & BDRV_O_PROTOCOL) {
1373 error_setg(errp, "Block protocol '%s' doesn't support the option "
1374 "'%s'", drv->format_name, entry->key);
1375 } else {
1376 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1377 "support the option '%s'", drv->format_name,
1378 bs->device_name, entry->key);
1381 ret = -EINVAL;
1382 goto close_and_fail;
1384 QDECREF(options);
1386 if (!bdrv_key_required(bs)) {
1387 bdrv_dev_change_media_cb(bs, true);
1390 *pbs = bs;
1391 return 0;
1393 unlink_and_fail:
1394 if (file != NULL) {
1395 bdrv_unref(file);
1397 if (bs->is_temporary) {
1398 unlink(filename);
1400 fail:
1401 QDECREF(bs->options);
1402 QDECREF(options);
1403 bs->options = NULL;
1404 if (!*pbs) {
1405 /* If *pbs is NULL, a new BDS has been created in this function and
1406 needs to be freed now. Otherwise, it does not need to be closed,
1407 since it has not really been opened yet. */
1408 bdrv_unref(bs);
1410 if (local_err) {
1411 error_propagate(errp, local_err);
1413 return ret;
1415 close_and_fail:
1416 /* See fail path, but now the BDS has to be always closed */
1417 if (*pbs) {
1418 bdrv_close(bs);
1419 } else {
1420 bdrv_unref(bs);
1422 QDECREF(options);
1423 if (local_err) {
1424 error_propagate(errp, local_err);
1426 return ret;
1429 typedef struct BlockReopenQueueEntry {
1430 bool prepared;
1431 BDRVReopenState state;
1432 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1433 } BlockReopenQueueEntry;
1436 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1437 * reopen of multiple devices.
1439 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1440 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1441 * be created and initialized. This newly created BlockReopenQueue should be
1442 * passed back in for subsequent calls that are intended to be of the same
1443 * atomic 'set'.
1445 * bs is the BlockDriverState to add to the reopen queue.
1447 * flags contains the open flags for the associated bs
1449 * returns a pointer to bs_queue, which is either the newly allocated
1450 * bs_queue, or the existing bs_queue being used.
1453 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1454 BlockDriverState *bs, int flags)
1456 assert(bs != NULL);
1458 BlockReopenQueueEntry *bs_entry;
1459 if (bs_queue == NULL) {
1460 bs_queue = g_new0(BlockReopenQueue, 1);
1461 QSIMPLEQ_INIT(bs_queue);
1464 if (bs->file) {
1465 bdrv_reopen_queue(bs_queue, bs->file, flags);
1468 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1469 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1471 bs_entry->state.bs = bs;
1472 bs_entry->state.flags = flags;
1474 return bs_queue;
1478 * Reopen multiple BlockDriverStates atomically & transactionally.
1480 * The queue passed in (bs_queue) must have been built up previous
1481 * via bdrv_reopen_queue().
1483 * Reopens all BDS specified in the queue, with the appropriate
1484 * flags. All devices are prepared for reopen, and failure of any
1485 * device will cause all device changes to be abandonded, and intermediate
1486 * data cleaned up.
1488 * If all devices prepare successfully, then the changes are committed
1489 * to all devices.
1492 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1494 int ret = -1;
1495 BlockReopenQueueEntry *bs_entry, *next;
1496 Error *local_err = NULL;
1498 assert(bs_queue != NULL);
1500 bdrv_drain_all();
1502 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1503 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1504 error_propagate(errp, local_err);
1505 goto cleanup;
1507 bs_entry->prepared = true;
1510 /* If we reach this point, we have success and just need to apply the
1511 * changes
1513 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1514 bdrv_reopen_commit(&bs_entry->state);
1517 ret = 0;
1519 cleanup:
1520 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1521 if (ret && bs_entry->prepared) {
1522 bdrv_reopen_abort(&bs_entry->state);
1524 g_free(bs_entry);
1526 g_free(bs_queue);
1527 return ret;
1531 /* Reopen a single BlockDriverState with the specified flags. */
1532 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1534 int ret = -1;
1535 Error *local_err = NULL;
1536 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1538 ret = bdrv_reopen_multiple(queue, &local_err);
1539 if (local_err != NULL) {
1540 error_propagate(errp, local_err);
1542 return ret;
1547 * Prepares a BlockDriverState for reopen. All changes are staged in the
1548 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1549 * the block driver layer .bdrv_reopen_prepare()
1551 * bs is the BlockDriverState to reopen
1552 * flags are the new open flags
1553 * queue is the reopen queue
1555 * Returns 0 on success, non-zero on error. On error errp will be set
1556 * as well.
1558 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1559 * It is the responsibility of the caller to then call the abort() or
1560 * commit() for any other BDS that have been left in a prepare() state
1563 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1564 Error **errp)
1566 int ret = -1;
1567 Error *local_err = NULL;
1568 BlockDriver *drv;
1570 assert(reopen_state != NULL);
1571 assert(reopen_state->bs->drv != NULL);
1572 drv = reopen_state->bs->drv;
1574 /* if we are to stay read-only, do not allow permission change
1575 * to r/w */
1576 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1577 reopen_state->flags & BDRV_O_RDWR) {
1578 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1579 reopen_state->bs->device_name);
1580 goto error;
1584 ret = bdrv_flush(reopen_state->bs);
1585 if (ret) {
1586 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1587 strerror(-ret));
1588 goto error;
1591 if (drv->bdrv_reopen_prepare) {
1592 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1593 if (ret) {
1594 if (local_err != NULL) {
1595 error_propagate(errp, local_err);
1596 } else {
1597 error_setg(errp, "failed while preparing to reopen image '%s'",
1598 reopen_state->bs->filename);
1600 goto error;
1602 } else {
1603 /* It is currently mandatory to have a bdrv_reopen_prepare()
1604 * handler for each supported drv. */
1605 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1606 drv->format_name, reopen_state->bs->device_name,
1607 "reopening of file");
1608 ret = -1;
1609 goto error;
1612 ret = 0;
1614 error:
1615 return ret;
1619 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1620 * makes them final by swapping the staging BlockDriverState contents into
1621 * the active BlockDriverState contents.
1623 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1625 BlockDriver *drv;
1627 assert(reopen_state != NULL);
1628 drv = reopen_state->bs->drv;
1629 assert(drv != NULL);
1631 /* If there are any driver level actions to take */
1632 if (drv->bdrv_reopen_commit) {
1633 drv->bdrv_reopen_commit(reopen_state);
1636 /* set BDS specific flags now */
1637 reopen_state->bs->open_flags = reopen_state->flags;
1638 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1639 BDRV_O_CACHE_WB);
1640 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1642 bdrv_refresh_limits(reopen_state->bs);
1646 * Abort the reopen, and delete and free the staged changes in
1647 * reopen_state
1649 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1651 BlockDriver *drv;
1653 assert(reopen_state != NULL);
1654 drv = reopen_state->bs->drv;
1655 assert(drv != NULL);
1657 if (drv->bdrv_reopen_abort) {
1658 drv->bdrv_reopen_abort(reopen_state);
1663 void bdrv_close(BlockDriverState *bs)
1665 if (bs->job) {
1666 block_job_cancel_sync(bs->job);
1668 bdrv_drain_all(); /* complete I/O */
1669 bdrv_flush(bs);
1670 bdrv_drain_all(); /* in case flush left pending I/O */
1671 notifier_list_notify(&bs->close_notifiers, bs);
1673 if (bs->drv) {
1674 if (bs->backing_hd) {
1675 bdrv_unref(bs->backing_hd);
1676 bs->backing_hd = NULL;
1678 bs->drv->bdrv_close(bs);
1679 g_free(bs->opaque);
1680 #ifdef _WIN32
1681 if (bs->is_temporary) {
1682 unlink(bs->filename);
1684 #endif
1685 bs->opaque = NULL;
1686 bs->drv = NULL;
1687 bs->copy_on_read = 0;
1688 bs->backing_file[0] = '\0';
1689 bs->backing_format[0] = '\0';
1690 bs->total_sectors = 0;
1691 bs->encrypted = 0;
1692 bs->valid_key = 0;
1693 bs->sg = 0;
1694 bs->growable = 0;
1695 bs->zero_beyond_eof = false;
1696 QDECREF(bs->options);
1697 bs->options = NULL;
1699 if (bs->file != NULL) {
1700 bdrv_unref(bs->file);
1701 bs->file = NULL;
1705 bdrv_dev_change_media_cb(bs, false);
1707 /*throttling disk I/O limits*/
1708 if (bs->io_limits_enabled) {
1709 bdrv_io_limits_disable(bs);
1713 void bdrv_close_all(void)
1715 BlockDriverState *bs;
1717 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1718 bdrv_close(bs);
1722 /* Check if any requests are in-flight (including throttled requests) */
1723 static bool bdrv_requests_pending(BlockDriverState *bs)
1725 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1726 return true;
1728 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1729 return true;
1731 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1732 return true;
1734 if (bs->file && bdrv_requests_pending(bs->file)) {
1735 return true;
1737 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1738 return true;
1740 return false;
1743 static bool bdrv_requests_pending_all(void)
1745 BlockDriverState *bs;
1746 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1747 if (bdrv_requests_pending(bs)) {
1748 return true;
1751 return false;
1755 * Wait for pending requests to complete across all BlockDriverStates
1757 * This function does not flush data to disk, use bdrv_flush_all() for that
1758 * after calling this function.
1760 * Note that completion of an asynchronous I/O operation can trigger any
1761 * number of other I/O operations on other devices---for example a coroutine
1762 * can be arbitrarily complex and a constant flow of I/O can come until the
1763 * coroutine is complete. Because of this, it is not possible to have a
1764 * function to drain a single device's I/O queue.
1766 void bdrv_drain_all(void)
1768 /* Always run first iteration so any pending completion BHs run */
1769 bool busy = true;
1770 BlockDriverState *bs;
1772 while (busy) {
1773 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1774 bdrv_start_throttled_reqs(bs);
1777 busy = bdrv_requests_pending_all();
1778 busy |= aio_poll(qemu_get_aio_context(), busy);
1782 /* make a BlockDriverState anonymous by removing from bdrv_state and
1783 * graph_bdrv_state list.
1784 Also, NULL terminate the device_name to prevent double remove */
1785 void bdrv_make_anon(BlockDriverState *bs)
1787 if (bs->device_name[0] != '\0') {
1788 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1790 bs->device_name[0] = '\0';
1791 if (bs->node_name[0] != '\0') {
1792 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1794 bs->node_name[0] = '\0';
1797 static void bdrv_rebind(BlockDriverState *bs)
1799 if (bs->drv && bs->drv->bdrv_rebind) {
1800 bs->drv->bdrv_rebind(bs);
1804 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1805 BlockDriverState *bs_src)
1807 /* move some fields that need to stay attached to the device */
1808 bs_dest->open_flags = bs_src->open_flags;
1810 /* dev info */
1811 bs_dest->dev_ops = bs_src->dev_ops;
1812 bs_dest->dev_opaque = bs_src->dev_opaque;
1813 bs_dest->dev = bs_src->dev;
1814 bs_dest->guest_block_size = bs_src->guest_block_size;
1815 bs_dest->copy_on_read = bs_src->copy_on_read;
1817 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1819 /* i/o throttled req */
1820 memcpy(&bs_dest->throttle_state,
1821 &bs_src->throttle_state,
1822 sizeof(ThrottleState));
1823 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1824 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1825 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1827 /* r/w error */
1828 bs_dest->on_read_error = bs_src->on_read_error;
1829 bs_dest->on_write_error = bs_src->on_write_error;
1831 /* i/o status */
1832 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1833 bs_dest->iostatus = bs_src->iostatus;
1835 /* dirty bitmap */
1836 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1838 /* reference count */
1839 bs_dest->refcnt = bs_src->refcnt;
1841 /* job */
1842 bs_dest->in_use = bs_src->in_use;
1843 bs_dest->job = bs_src->job;
1845 /* keep the same entry in bdrv_states */
1846 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1847 bs_src->device_name);
1848 bs_dest->device_list = bs_src->device_list;
1850 /* keep the same entry in graph_bdrv_states
1851 * We do want to swap name but don't want to swap linked list entries
1853 bs_dest->node_list = bs_src->node_list;
1857 * Swap bs contents for two image chains while they are live,
1858 * while keeping required fields on the BlockDriverState that is
1859 * actually attached to a device.
1861 * This will modify the BlockDriverState fields, and swap contents
1862 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1864 * bs_new is required to be anonymous.
1866 * This function does not create any image files.
1868 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1870 BlockDriverState tmp;
1872 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1873 assert(bs_new->device_name[0] == '\0');
1874 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1875 assert(bs_new->job == NULL);
1876 assert(bs_new->dev == NULL);
1877 assert(bs_new->in_use == 0);
1878 assert(bs_new->io_limits_enabled == false);
1879 assert(!throttle_have_timer(&bs_new->throttle_state));
1881 tmp = *bs_new;
1882 *bs_new = *bs_old;
1883 *bs_old = tmp;
1885 /* there are some fields that should not be swapped, move them back */
1886 bdrv_move_feature_fields(&tmp, bs_old);
1887 bdrv_move_feature_fields(bs_old, bs_new);
1888 bdrv_move_feature_fields(bs_new, &tmp);
1890 /* bs_new shouldn't be in bdrv_states even after the swap! */
1891 assert(bs_new->device_name[0] == '\0');
1893 /* Check a few fields that should remain attached to the device */
1894 assert(bs_new->dev == NULL);
1895 assert(bs_new->job == NULL);
1896 assert(bs_new->in_use == 0);
1897 assert(bs_new->io_limits_enabled == false);
1898 assert(!throttle_have_timer(&bs_new->throttle_state));
1900 bdrv_rebind(bs_new);
1901 bdrv_rebind(bs_old);
1905 * Add new bs contents at the top of an image chain while the chain is
1906 * live, while keeping required fields on the top layer.
1908 * This will modify the BlockDriverState fields, and swap contents
1909 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1911 * bs_new is required to be anonymous.
1913 * This function does not create any image files.
1915 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1917 bdrv_swap(bs_new, bs_top);
1919 /* The contents of 'tmp' will become bs_top, as we are
1920 * swapping bs_new and bs_top contents. */
1921 bs_top->backing_hd = bs_new;
1922 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1923 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1924 bs_new->filename);
1925 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1926 bs_new->drv ? bs_new->drv->format_name : "");
1929 static void bdrv_delete(BlockDriverState *bs)
1931 assert(!bs->dev);
1932 assert(!bs->job);
1933 assert(!bs->in_use);
1934 assert(!bs->refcnt);
1935 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1937 bdrv_close(bs);
1939 /* remove from list, if necessary */
1940 bdrv_make_anon(bs);
1942 g_free(bs);
1945 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1946 /* TODO change to DeviceState *dev when all users are qdevified */
1948 if (bs->dev) {
1949 return -EBUSY;
1951 bs->dev = dev;
1952 bdrv_iostatus_reset(bs);
1953 return 0;
1956 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1957 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1959 if (bdrv_attach_dev(bs, dev) < 0) {
1960 abort();
1964 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1965 /* TODO change to DeviceState *dev when all users are qdevified */
1967 assert(bs->dev == dev);
1968 bs->dev = NULL;
1969 bs->dev_ops = NULL;
1970 bs->dev_opaque = NULL;
1971 bs->guest_block_size = 512;
1974 /* TODO change to return DeviceState * when all users are qdevified */
1975 void *bdrv_get_attached_dev(BlockDriverState *bs)
1977 return bs->dev;
1980 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1981 void *opaque)
1983 bs->dev_ops = ops;
1984 bs->dev_opaque = opaque;
1987 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1988 enum MonitorEvent ev,
1989 BlockErrorAction action, bool is_read)
1991 QObject *data;
1992 const char *action_str;
1994 switch (action) {
1995 case BDRV_ACTION_REPORT:
1996 action_str = "report";
1997 break;
1998 case BDRV_ACTION_IGNORE:
1999 action_str = "ignore";
2000 break;
2001 case BDRV_ACTION_STOP:
2002 action_str = "stop";
2003 break;
2004 default:
2005 abort();
2008 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2009 bdrv->device_name,
2010 action_str,
2011 is_read ? "read" : "write");
2012 monitor_protocol_event(ev, data);
2014 qobject_decref(data);
2017 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2019 QObject *data;
2021 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2022 bdrv_get_device_name(bs), ejected);
2023 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2025 qobject_decref(data);
2028 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2030 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2031 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2032 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2033 if (tray_was_closed) {
2034 /* tray open */
2035 bdrv_emit_qmp_eject_event(bs, true);
2037 if (load) {
2038 /* tray close */
2039 bdrv_emit_qmp_eject_event(bs, false);
2044 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2046 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2049 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2051 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2052 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2056 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2058 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2059 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2061 return false;
2064 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2066 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2067 bs->dev_ops->resize_cb(bs->dev_opaque);
2071 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2073 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2074 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2076 return false;
2080 * Run consistency checks on an image
2082 * Returns 0 if the check could be completed (it doesn't mean that the image is
2083 * free of errors) or -errno when an internal error occurred. The results of the
2084 * check are stored in res.
2086 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2088 if (bs->drv->bdrv_check == NULL) {
2089 return -ENOTSUP;
2092 memset(res, 0, sizeof(*res));
2093 return bs->drv->bdrv_check(bs, res, fix);
2096 #define COMMIT_BUF_SECTORS 2048
2098 /* commit COW file into the raw image */
2099 int bdrv_commit(BlockDriverState *bs)
2101 BlockDriver *drv = bs->drv;
2102 int64_t sector, total_sectors, length, backing_length;
2103 int n, ro, open_flags;
2104 int ret = 0;
2105 uint8_t *buf = NULL;
2106 char filename[PATH_MAX];
2108 if (!drv)
2109 return -ENOMEDIUM;
2111 if (!bs->backing_hd) {
2112 return -ENOTSUP;
2115 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2116 return -EBUSY;
2119 ro = bs->backing_hd->read_only;
2120 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2121 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2122 open_flags = bs->backing_hd->open_flags;
2124 if (ro) {
2125 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2126 return -EACCES;
2130 length = bdrv_getlength(bs);
2131 if (length < 0) {
2132 ret = length;
2133 goto ro_cleanup;
2136 backing_length = bdrv_getlength(bs->backing_hd);
2137 if (backing_length < 0) {
2138 ret = backing_length;
2139 goto ro_cleanup;
2142 /* If our top snapshot is larger than the backing file image,
2143 * grow the backing file image if possible. If not possible,
2144 * we must return an error */
2145 if (length > backing_length) {
2146 ret = bdrv_truncate(bs->backing_hd, length);
2147 if (ret < 0) {
2148 goto ro_cleanup;
2152 total_sectors = length >> BDRV_SECTOR_BITS;
2153 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2155 for (sector = 0; sector < total_sectors; sector += n) {
2156 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2157 if (ret < 0) {
2158 goto ro_cleanup;
2160 if (ret) {
2161 ret = bdrv_read(bs, sector, buf, n);
2162 if (ret < 0) {
2163 goto ro_cleanup;
2166 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2167 if (ret < 0) {
2168 goto ro_cleanup;
2173 if (drv->bdrv_make_empty) {
2174 ret = drv->bdrv_make_empty(bs);
2175 if (ret < 0) {
2176 goto ro_cleanup;
2178 bdrv_flush(bs);
2182 * Make sure all data we wrote to the backing device is actually
2183 * stable on disk.
2185 if (bs->backing_hd) {
2186 bdrv_flush(bs->backing_hd);
2189 ret = 0;
2190 ro_cleanup:
2191 g_free(buf);
2193 if (ro) {
2194 /* ignoring error return here */
2195 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2198 return ret;
2201 int bdrv_commit_all(void)
2203 BlockDriverState *bs;
2205 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2206 if (bs->drv && bs->backing_hd) {
2207 int ret = bdrv_commit(bs);
2208 if (ret < 0) {
2209 return ret;
2213 return 0;
2217 * Remove an active request from the tracked requests list
2219 * This function should be called when a tracked request is completing.
2221 static void tracked_request_end(BdrvTrackedRequest *req)
2223 if (req->serialising) {
2224 req->bs->serialising_in_flight--;
2227 QLIST_REMOVE(req, list);
2228 qemu_co_queue_restart_all(&req->wait_queue);
2232 * Add an active request to the tracked requests list
2234 static void tracked_request_begin(BdrvTrackedRequest *req,
2235 BlockDriverState *bs,
2236 int64_t offset,
2237 unsigned int bytes, bool is_write)
2239 *req = (BdrvTrackedRequest){
2240 .bs = bs,
2241 .offset = offset,
2242 .bytes = bytes,
2243 .is_write = is_write,
2244 .co = qemu_coroutine_self(),
2245 .serialising = false,
2246 .overlap_offset = offset,
2247 .overlap_bytes = bytes,
2250 qemu_co_queue_init(&req->wait_queue);
2252 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2255 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2257 int64_t overlap_offset = req->offset & ~(align - 1);
2258 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2259 - overlap_offset;
2261 if (!req->serialising) {
2262 req->bs->serialising_in_flight++;
2263 req->serialising = true;
2266 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2267 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2271 * Round a region to cluster boundaries
2273 void bdrv_round_to_clusters(BlockDriverState *bs,
2274 int64_t sector_num, int nb_sectors,
2275 int64_t *cluster_sector_num,
2276 int *cluster_nb_sectors)
2278 BlockDriverInfo bdi;
2280 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2281 *cluster_sector_num = sector_num;
2282 *cluster_nb_sectors = nb_sectors;
2283 } else {
2284 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2285 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2286 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2287 nb_sectors, c);
2291 static int bdrv_get_cluster_size(BlockDriverState *bs)
2293 BlockDriverInfo bdi;
2294 int ret;
2296 ret = bdrv_get_info(bs, &bdi);
2297 if (ret < 0 || bdi.cluster_size == 0) {
2298 return bs->request_alignment;
2299 } else {
2300 return bdi.cluster_size;
2304 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2305 int64_t offset, unsigned int bytes)
2307 /* aaaa bbbb */
2308 if (offset >= req->overlap_offset + req->overlap_bytes) {
2309 return false;
2311 /* bbbb aaaa */
2312 if (req->overlap_offset >= offset + bytes) {
2313 return false;
2315 return true;
2318 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2320 BlockDriverState *bs = self->bs;
2321 BdrvTrackedRequest *req;
2322 bool retry;
2323 bool waited = false;
2325 if (!bs->serialising_in_flight) {
2326 return false;
2329 do {
2330 retry = false;
2331 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2332 if (req == self || (!req->serialising && !self->serialising)) {
2333 continue;
2335 if (tracked_request_overlaps(req, self->overlap_offset,
2336 self->overlap_bytes))
2338 /* Hitting this means there was a reentrant request, for
2339 * example, a block driver issuing nested requests. This must
2340 * never happen since it means deadlock.
2342 assert(qemu_coroutine_self() != req->co);
2344 /* If the request is already (indirectly) waiting for us, or
2345 * will wait for us as soon as it wakes up, then just go on
2346 * (instead of producing a deadlock in the former case). */
2347 if (!req->waiting_for) {
2348 self->waiting_for = req;
2349 qemu_co_queue_wait(&req->wait_queue);
2350 self->waiting_for = NULL;
2351 retry = true;
2352 waited = true;
2353 break;
2357 } while (retry);
2359 return waited;
2363 * Return values:
2364 * 0 - success
2365 * -EINVAL - backing format specified, but no file
2366 * -ENOSPC - can't update the backing file because no space is left in the
2367 * image file header
2368 * -ENOTSUP - format driver doesn't support changing the backing file
2370 int bdrv_change_backing_file(BlockDriverState *bs,
2371 const char *backing_file, const char *backing_fmt)
2373 BlockDriver *drv = bs->drv;
2374 int ret;
2376 /* Backing file format doesn't make sense without a backing file */
2377 if (backing_fmt && !backing_file) {
2378 return -EINVAL;
2381 if (drv->bdrv_change_backing_file != NULL) {
2382 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2383 } else {
2384 ret = -ENOTSUP;
2387 if (ret == 0) {
2388 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2389 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2391 return ret;
2395 * Finds the image layer in the chain that has 'bs' as its backing file.
2397 * active is the current topmost image.
2399 * Returns NULL if bs is not found in active's image chain,
2400 * or if active == bs.
2402 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2403 BlockDriverState *bs)
2405 BlockDriverState *overlay = NULL;
2406 BlockDriverState *intermediate;
2408 assert(active != NULL);
2409 assert(bs != NULL);
2411 /* if bs is the same as active, then by definition it has no overlay
2413 if (active == bs) {
2414 return NULL;
2417 intermediate = active;
2418 while (intermediate->backing_hd) {
2419 if (intermediate->backing_hd == bs) {
2420 overlay = intermediate;
2421 break;
2423 intermediate = intermediate->backing_hd;
2426 return overlay;
2429 typedef struct BlkIntermediateStates {
2430 BlockDriverState *bs;
2431 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2432 } BlkIntermediateStates;
2436 * Drops images above 'base' up to and including 'top', and sets the image
2437 * above 'top' to have base as its backing file.
2439 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2440 * information in 'bs' can be properly updated.
2442 * E.g., this will convert the following chain:
2443 * bottom <- base <- intermediate <- top <- active
2445 * to
2447 * bottom <- base <- active
2449 * It is allowed for bottom==base, in which case it converts:
2451 * base <- intermediate <- top <- active
2453 * to
2455 * base <- active
2457 * Error conditions:
2458 * if active == top, that is considered an error
2461 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2462 BlockDriverState *base)
2464 BlockDriverState *intermediate;
2465 BlockDriverState *base_bs = NULL;
2466 BlockDriverState *new_top_bs = NULL;
2467 BlkIntermediateStates *intermediate_state, *next;
2468 int ret = -EIO;
2470 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2471 QSIMPLEQ_INIT(&states_to_delete);
2473 if (!top->drv || !base->drv) {
2474 goto exit;
2477 new_top_bs = bdrv_find_overlay(active, top);
2479 if (new_top_bs == NULL) {
2480 /* we could not find the image above 'top', this is an error */
2481 goto exit;
2484 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2485 * to do, no intermediate images */
2486 if (new_top_bs->backing_hd == base) {
2487 ret = 0;
2488 goto exit;
2491 intermediate = top;
2493 /* now we will go down through the list, and add each BDS we find
2494 * into our deletion queue, until we hit the 'base'
2496 while (intermediate) {
2497 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2498 intermediate_state->bs = intermediate;
2499 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2501 if (intermediate->backing_hd == base) {
2502 base_bs = intermediate->backing_hd;
2503 break;
2505 intermediate = intermediate->backing_hd;
2507 if (base_bs == NULL) {
2508 /* something went wrong, we did not end at the base. safely
2509 * unravel everything, and exit with error */
2510 goto exit;
2513 /* success - we can delete the intermediate states, and link top->base */
2514 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2515 base_bs->drv ? base_bs->drv->format_name : "");
2516 if (ret) {
2517 goto exit;
2519 new_top_bs->backing_hd = base_bs;
2521 bdrv_refresh_limits(new_top_bs);
2523 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2524 /* so that bdrv_close() does not recursively close the chain */
2525 intermediate_state->bs->backing_hd = NULL;
2526 bdrv_unref(intermediate_state->bs);
2528 ret = 0;
2530 exit:
2531 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2532 g_free(intermediate_state);
2534 return ret;
2538 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2539 size_t size)
2541 int64_t len;
2543 if (!bdrv_is_inserted(bs))
2544 return -ENOMEDIUM;
2546 if (bs->growable)
2547 return 0;
2549 len = bdrv_getlength(bs);
2551 if (offset < 0)
2552 return -EIO;
2554 if ((offset > len) || (len - offset < size))
2555 return -EIO;
2557 return 0;
2560 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2561 int nb_sectors)
2563 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2564 nb_sectors * BDRV_SECTOR_SIZE);
2567 typedef struct RwCo {
2568 BlockDriverState *bs;
2569 int64_t offset;
2570 QEMUIOVector *qiov;
2571 bool is_write;
2572 int ret;
2573 BdrvRequestFlags flags;
2574 } RwCo;
2576 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2578 RwCo *rwco = opaque;
2580 if (!rwco->is_write) {
2581 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2582 rwco->qiov->size, rwco->qiov,
2583 rwco->flags);
2584 } else {
2585 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2586 rwco->qiov->size, rwco->qiov,
2587 rwco->flags);
2592 * Process a vectored synchronous request using coroutines
2594 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2595 QEMUIOVector *qiov, bool is_write,
2596 BdrvRequestFlags flags)
2598 Coroutine *co;
2599 RwCo rwco = {
2600 .bs = bs,
2601 .offset = offset,
2602 .qiov = qiov,
2603 .is_write = is_write,
2604 .ret = NOT_DONE,
2605 .flags = flags,
2609 * In sync call context, when the vcpu is blocked, this throttling timer
2610 * will not fire; so the I/O throttling function has to be disabled here
2611 * if it has been enabled.
2613 if (bs->io_limits_enabled) {
2614 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2615 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2616 bdrv_io_limits_disable(bs);
2619 if (qemu_in_coroutine()) {
2620 /* Fast-path if already in coroutine context */
2621 bdrv_rw_co_entry(&rwco);
2622 } else {
2623 co = qemu_coroutine_create(bdrv_rw_co_entry);
2624 qemu_coroutine_enter(co, &rwco);
2625 while (rwco.ret == NOT_DONE) {
2626 qemu_aio_wait();
2629 return rwco.ret;
2633 * Process a synchronous request using coroutines
2635 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2636 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2638 QEMUIOVector qiov;
2639 struct iovec iov = {
2640 .iov_base = (void *)buf,
2641 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2644 qemu_iovec_init_external(&qiov, &iov, 1);
2645 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2646 &qiov, is_write, flags);
2649 /* return < 0 if error. See bdrv_write() for the return codes */
2650 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2651 uint8_t *buf, int nb_sectors)
2653 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2656 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2657 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2658 uint8_t *buf, int nb_sectors)
2660 bool enabled;
2661 int ret;
2663 enabled = bs->io_limits_enabled;
2664 bs->io_limits_enabled = false;
2665 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2666 bs->io_limits_enabled = enabled;
2667 return ret;
2670 /* Return < 0 if error. Important errors are:
2671 -EIO generic I/O error (may happen for all errors)
2672 -ENOMEDIUM No media inserted.
2673 -EINVAL Invalid sector number or nb_sectors
2674 -EACCES Trying to write a read-only device
2676 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2677 const uint8_t *buf, int nb_sectors)
2679 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2682 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2683 int nb_sectors, BdrvRequestFlags flags)
2685 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2686 BDRV_REQ_ZERO_WRITE | flags);
2690 * Completely zero out a block device with the help of bdrv_write_zeroes.
2691 * The operation is sped up by checking the block status and only writing
2692 * zeroes to the device if they currently do not return zeroes. Optional
2693 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2695 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2697 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2699 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2700 int64_t ret, nb_sectors, sector_num = 0;
2701 int n;
2703 for (;;) {
2704 nb_sectors = target_size - sector_num;
2705 if (nb_sectors <= 0) {
2706 return 0;
2708 if (nb_sectors > INT_MAX) {
2709 nb_sectors = INT_MAX;
2711 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2712 if (ret < 0) {
2713 error_report("error getting block status at sector %" PRId64 ": %s",
2714 sector_num, strerror(-ret));
2715 return ret;
2717 if (ret & BDRV_BLOCK_ZERO) {
2718 sector_num += n;
2719 continue;
2721 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2722 if (ret < 0) {
2723 error_report("error writing zeroes at sector %" PRId64 ": %s",
2724 sector_num, strerror(-ret));
2725 return ret;
2727 sector_num += n;
2731 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2733 QEMUIOVector qiov;
2734 struct iovec iov = {
2735 .iov_base = (void *)buf,
2736 .iov_len = bytes,
2738 int ret;
2740 if (bytes < 0) {
2741 return -EINVAL;
2744 qemu_iovec_init_external(&qiov, &iov, 1);
2745 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2746 if (ret < 0) {
2747 return ret;
2750 return bytes;
2753 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2755 int ret;
2757 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2758 if (ret < 0) {
2759 return ret;
2762 return qiov->size;
2765 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2766 const void *buf, int bytes)
2768 QEMUIOVector qiov;
2769 struct iovec iov = {
2770 .iov_base = (void *) buf,
2771 .iov_len = bytes,
2774 if (bytes < 0) {
2775 return -EINVAL;
2778 qemu_iovec_init_external(&qiov, &iov, 1);
2779 return bdrv_pwritev(bs, offset, &qiov);
2783 * Writes to the file and ensures that no writes are reordered across this
2784 * request (acts as a barrier)
2786 * Returns 0 on success, -errno in error cases.
2788 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2789 const void *buf, int count)
2791 int ret;
2793 ret = bdrv_pwrite(bs, offset, buf, count);
2794 if (ret < 0) {
2795 return ret;
2798 /* No flush needed for cache modes that already do it */
2799 if (bs->enable_write_cache) {
2800 bdrv_flush(bs);
2803 return 0;
2806 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2807 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2809 /* Perform I/O through a temporary buffer so that users who scribble over
2810 * their read buffer while the operation is in progress do not end up
2811 * modifying the image file. This is critical for zero-copy guest I/O
2812 * where anything might happen inside guest memory.
2814 void *bounce_buffer;
2816 BlockDriver *drv = bs->drv;
2817 struct iovec iov;
2818 QEMUIOVector bounce_qiov;
2819 int64_t cluster_sector_num;
2820 int cluster_nb_sectors;
2821 size_t skip_bytes;
2822 int ret;
2824 /* Cover entire cluster so no additional backing file I/O is required when
2825 * allocating cluster in the image file.
2827 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2828 &cluster_sector_num, &cluster_nb_sectors);
2830 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2831 cluster_sector_num, cluster_nb_sectors);
2833 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2834 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2835 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2837 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2838 &bounce_qiov);
2839 if (ret < 0) {
2840 goto err;
2843 if (drv->bdrv_co_write_zeroes &&
2844 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2845 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2846 cluster_nb_sectors, 0);
2847 } else {
2848 /* This does not change the data on the disk, it is not necessary
2849 * to flush even in cache=writethrough mode.
2851 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2852 &bounce_qiov);
2855 if (ret < 0) {
2856 /* It might be okay to ignore write errors for guest requests. If this
2857 * is a deliberate copy-on-read then we don't want to ignore the error.
2858 * Simply report it in all cases.
2860 goto err;
2863 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2864 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2865 nb_sectors * BDRV_SECTOR_SIZE);
2867 err:
2868 qemu_vfree(bounce_buffer);
2869 return ret;
2873 * Forwards an already correctly aligned request to the BlockDriver. This
2874 * handles copy on read and zeroing after EOF; any other features must be
2875 * implemented by the caller.
2877 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2878 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2879 int64_t align, QEMUIOVector *qiov, int flags)
2881 BlockDriver *drv = bs->drv;
2882 int ret;
2884 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2885 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2887 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2888 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2890 /* Handle Copy on Read and associated serialisation */
2891 if (flags & BDRV_REQ_COPY_ON_READ) {
2892 /* If we touch the same cluster it counts as an overlap. This
2893 * guarantees that allocating writes will be serialized and not race
2894 * with each other for the same cluster. For example, in copy-on-read
2895 * it ensures that the CoR read and write operations are atomic and
2896 * guest writes cannot interleave between them. */
2897 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2900 wait_serialising_requests(req);
2902 if (flags & BDRV_REQ_COPY_ON_READ) {
2903 int pnum;
2905 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2906 if (ret < 0) {
2907 goto out;
2910 if (!ret || pnum != nb_sectors) {
2911 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2912 goto out;
2916 /* Forward the request to the BlockDriver */
2917 if (!(bs->zero_beyond_eof && bs->growable)) {
2918 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2919 } else {
2920 /* Read zeros after EOF of growable BDSes */
2921 int64_t len, total_sectors, max_nb_sectors;
2923 len = bdrv_getlength(bs);
2924 if (len < 0) {
2925 ret = len;
2926 goto out;
2929 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2930 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
2931 align >> BDRV_SECTOR_BITS);
2932 if (max_nb_sectors > 0) {
2933 ret = drv->bdrv_co_readv(bs, sector_num,
2934 MIN(nb_sectors, max_nb_sectors), qiov);
2935 } else {
2936 ret = 0;
2939 /* Reading beyond end of file is supposed to produce zeroes */
2940 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2941 uint64_t offset = MAX(0, total_sectors - sector_num);
2942 uint64_t bytes = (sector_num + nb_sectors - offset) *
2943 BDRV_SECTOR_SIZE;
2944 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2948 out:
2949 return ret;
2953 * Handle a read request in coroutine context
2955 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
2956 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
2957 BdrvRequestFlags flags)
2959 BlockDriver *drv = bs->drv;
2960 BdrvTrackedRequest req;
2962 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
2963 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
2964 uint8_t *head_buf = NULL;
2965 uint8_t *tail_buf = NULL;
2966 QEMUIOVector local_qiov;
2967 bool use_local_qiov = false;
2968 int ret;
2970 if (!drv) {
2971 return -ENOMEDIUM;
2973 if (bdrv_check_byte_request(bs, offset, bytes)) {
2974 return -EIO;
2977 if (bs->copy_on_read) {
2978 flags |= BDRV_REQ_COPY_ON_READ;
2981 /* throttling disk I/O */
2982 if (bs->io_limits_enabled) {
2983 bdrv_io_limits_intercept(bs, bytes, false);
2986 /* Align read if necessary by padding qiov */
2987 if (offset & (align - 1)) {
2988 head_buf = qemu_blockalign(bs, align);
2989 qemu_iovec_init(&local_qiov, qiov->niov + 2);
2990 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
2991 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
2992 use_local_qiov = true;
2994 bytes += offset & (align - 1);
2995 offset = offset & ~(align - 1);
2998 if ((offset + bytes) & (align - 1)) {
2999 if (!use_local_qiov) {
3000 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3001 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3002 use_local_qiov = true;
3004 tail_buf = qemu_blockalign(bs, align);
3005 qemu_iovec_add(&local_qiov, tail_buf,
3006 align - ((offset + bytes) & (align - 1)));
3008 bytes = ROUND_UP(bytes, align);
3011 tracked_request_begin(&req, bs, offset, bytes, false);
3012 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3013 use_local_qiov ? &local_qiov : qiov,
3014 flags);
3015 tracked_request_end(&req);
3017 if (use_local_qiov) {
3018 qemu_iovec_destroy(&local_qiov);
3019 qemu_vfree(head_buf);
3020 qemu_vfree(tail_buf);
3023 return ret;
3026 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3027 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3028 BdrvRequestFlags flags)
3030 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3031 return -EINVAL;
3034 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3035 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3038 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3039 int nb_sectors, QEMUIOVector *qiov)
3041 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3043 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3046 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3047 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3049 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3051 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3052 BDRV_REQ_COPY_ON_READ);
3055 /* if no limit is specified in the BlockLimits use a default
3056 * of 32768 512-byte sectors (16 MiB) per request.
3058 #define MAX_WRITE_ZEROES_DEFAULT 32768
3060 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3061 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3063 BlockDriver *drv = bs->drv;
3064 QEMUIOVector qiov;
3065 struct iovec iov = {0};
3066 int ret = 0;
3068 int max_write_zeroes = bs->bl.max_write_zeroes ?
3069 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3071 while (nb_sectors > 0 && !ret) {
3072 int num = nb_sectors;
3074 /* Align request. Block drivers can expect the "bulk" of the request
3075 * to be aligned.
3077 if (bs->bl.write_zeroes_alignment
3078 && num > bs->bl.write_zeroes_alignment) {
3079 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3080 /* Make a small request up to the first aligned sector. */
3081 num = bs->bl.write_zeroes_alignment;
3082 num -= sector_num % bs->bl.write_zeroes_alignment;
3083 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3084 /* Shorten the request to the last aligned sector. num cannot
3085 * underflow because num > bs->bl.write_zeroes_alignment.
3087 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3091 /* limit request size */
3092 if (num > max_write_zeroes) {
3093 num = max_write_zeroes;
3096 ret = -ENOTSUP;
3097 /* First try the efficient write zeroes operation */
3098 if (drv->bdrv_co_write_zeroes) {
3099 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3102 if (ret == -ENOTSUP) {
3103 /* Fall back to bounce buffer if write zeroes is unsupported */
3104 iov.iov_len = num * BDRV_SECTOR_SIZE;
3105 if (iov.iov_base == NULL) {
3106 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3107 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3109 qemu_iovec_init_external(&qiov, &iov, 1);
3111 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3113 /* Keep bounce buffer around if it is big enough for all
3114 * all future requests.
3116 if (num < max_write_zeroes) {
3117 qemu_vfree(iov.iov_base);
3118 iov.iov_base = NULL;
3122 sector_num += num;
3123 nb_sectors -= num;
3126 qemu_vfree(iov.iov_base);
3127 return ret;
3131 * Forwards an already correctly aligned write request to the BlockDriver.
3133 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3134 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3135 QEMUIOVector *qiov, int flags)
3137 BlockDriver *drv = bs->drv;
3138 bool waited;
3139 int ret;
3141 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3142 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3144 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3145 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3147 waited = wait_serialising_requests(req);
3148 assert(!waited || !req->serialising);
3149 assert(req->overlap_offset <= offset);
3150 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3152 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3154 if (ret < 0) {
3155 /* Do nothing, write notifier decided to fail this request */
3156 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3157 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3158 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3159 } else {
3160 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3161 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3163 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3165 if (ret == 0 && !bs->enable_write_cache) {
3166 ret = bdrv_co_flush(bs);
3169 bdrv_set_dirty(bs, sector_num, nb_sectors);
3171 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3172 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3174 if (bs->growable && ret >= 0) {
3175 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3178 return ret;
3182 * Handle a write request in coroutine context
3184 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3185 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3186 BdrvRequestFlags flags)
3188 BdrvTrackedRequest req;
3189 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3190 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3191 uint8_t *head_buf = NULL;
3192 uint8_t *tail_buf = NULL;
3193 QEMUIOVector local_qiov;
3194 bool use_local_qiov = false;
3195 int ret;
3197 if (!bs->drv) {
3198 return -ENOMEDIUM;
3200 if (bs->read_only) {
3201 return -EACCES;
3203 if (bdrv_check_byte_request(bs, offset, bytes)) {
3204 return -EIO;
3207 /* throttling disk I/O */
3208 if (bs->io_limits_enabled) {
3209 bdrv_io_limits_intercept(bs, bytes, true);
3213 * Align write if necessary by performing a read-modify-write cycle.
3214 * Pad qiov with the read parts and be sure to have a tracked request not
3215 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3217 tracked_request_begin(&req, bs, offset, bytes, true);
3219 if (offset & (align - 1)) {
3220 QEMUIOVector head_qiov;
3221 struct iovec head_iov;
3223 mark_request_serialising(&req, align);
3224 wait_serialising_requests(&req);
3226 head_buf = qemu_blockalign(bs, align);
3227 head_iov = (struct iovec) {
3228 .iov_base = head_buf,
3229 .iov_len = align,
3231 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3233 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3234 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3235 align, &head_qiov, 0);
3236 if (ret < 0) {
3237 goto fail;
3239 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3241 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3242 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3243 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3244 use_local_qiov = true;
3246 bytes += offset & (align - 1);
3247 offset = offset & ~(align - 1);
3250 if ((offset + bytes) & (align - 1)) {
3251 QEMUIOVector tail_qiov;
3252 struct iovec tail_iov;
3253 size_t tail_bytes;
3254 bool waited;
3256 mark_request_serialising(&req, align);
3257 waited = wait_serialising_requests(&req);
3258 assert(!waited || !use_local_qiov);
3260 tail_buf = qemu_blockalign(bs, align);
3261 tail_iov = (struct iovec) {
3262 .iov_base = tail_buf,
3263 .iov_len = align,
3265 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3267 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3268 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3269 align, &tail_qiov, 0);
3270 if (ret < 0) {
3271 goto fail;
3273 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3275 if (!use_local_qiov) {
3276 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3277 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3278 use_local_qiov = true;
3281 tail_bytes = (offset + bytes) & (align - 1);
3282 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3284 bytes = ROUND_UP(bytes, align);
3287 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3288 use_local_qiov ? &local_qiov : qiov,
3289 flags);
3291 fail:
3292 tracked_request_end(&req);
3294 if (use_local_qiov) {
3295 qemu_iovec_destroy(&local_qiov);
3297 qemu_vfree(head_buf);
3298 qemu_vfree(tail_buf);
3300 return ret;
3303 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3304 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3305 BdrvRequestFlags flags)
3307 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3308 return -EINVAL;
3311 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3312 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3315 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3316 int nb_sectors, QEMUIOVector *qiov)
3318 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3320 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3323 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3324 int64_t sector_num, int nb_sectors,
3325 BdrvRequestFlags flags)
3327 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3329 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3330 flags &= ~BDRV_REQ_MAY_UNMAP;
3333 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3334 BDRV_REQ_ZERO_WRITE | flags);
3338 * Truncate file to 'offset' bytes (needed only for file protocols)
3340 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3342 BlockDriver *drv = bs->drv;
3343 int ret;
3344 if (!drv)
3345 return -ENOMEDIUM;
3346 if (!drv->bdrv_truncate)
3347 return -ENOTSUP;
3348 if (bs->read_only)
3349 return -EACCES;
3350 if (bdrv_in_use(bs))
3351 return -EBUSY;
3352 ret = drv->bdrv_truncate(bs, offset);
3353 if (ret == 0) {
3354 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3355 bdrv_dev_resize_cb(bs);
3357 return ret;
3361 * Length of a allocated file in bytes. Sparse files are counted by actual
3362 * allocated space. Return < 0 if error or unknown.
3364 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3366 BlockDriver *drv = bs->drv;
3367 if (!drv) {
3368 return -ENOMEDIUM;
3370 if (drv->bdrv_get_allocated_file_size) {
3371 return drv->bdrv_get_allocated_file_size(bs);
3373 if (bs->file) {
3374 return bdrv_get_allocated_file_size(bs->file);
3376 return -ENOTSUP;
3380 * Length of a file in bytes. Return < 0 if error or unknown.
3382 int64_t bdrv_getlength(BlockDriverState *bs)
3384 BlockDriver *drv = bs->drv;
3385 if (!drv)
3386 return -ENOMEDIUM;
3388 if (drv->has_variable_length) {
3389 int ret = refresh_total_sectors(bs, bs->total_sectors);
3390 if (ret < 0) {
3391 return ret;
3394 return bs->total_sectors * BDRV_SECTOR_SIZE;
3397 /* return 0 as number of sectors if no device present or error */
3398 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3400 int64_t length;
3401 length = bdrv_getlength(bs);
3402 if (length < 0)
3403 length = 0;
3404 else
3405 length = length >> BDRV_SECTOR_BITS;
3406 *nb_sectors_ptr = length;
3409 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3410 BlockdevOnError on_write_error)
3412 bs->on_read_error = on_read_error;
3413 bs->on_write_error = on_write_error;
3416 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3418 return is_read ? bs->on_read_error : bs->on_write_error;
3421 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3423 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3425 switch (on_err) {
3426 case BLOCKDEV_ON_ERROR_ENOSPC:
3427 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3428 case BLOCKDEV_ON_ERROR_STOP:
3429 return BDRV_ACTION_STOP;
3430 case BLOCKDEV_ON_ERROR_REPORT:
3431 return BDRV_ACTION_REPORT;
3432 case BLOCKDEV_ON_ERROR_IGNORE:
3433 return BDRV_ACTION_IGNORE;
3434 default:
3435 abort();
3439 /* This is done by device models because, while the block layer knows
3440 * about the error, it does not know whether an operation comes from
3441 * the device or the block layer (from a job, for example).
3443 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3444 bool is_read, int error)
3446 assert(error >= 0);
3447 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3448 if (action == BDRV_ACTION_STOP) {
3449 vm_stop(RUN_STATE_IO_ERROR);
3450 bdrv_iostatus_set_err(bs, error);
3454 int bdrv_is_read_only(BlockDriverState *bs)
3456 return bs->read_only;
3459 int bdrv_is_sg(BlockDriverState *bs)
3461 return bs->sg;
3464 int bdrv_enable_write_cache(BlockDriverState *bs)
3466 return bs->enable_write_cache;
3469 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3471 bs->enable_write_cache = wce;
3473 /* so a reopen() will preserve wce */
3474 if (wce) {
3475 bs->open_flags |= BDRV_O_CACHE_WB;
3476 } else {
3477 bs->open_flags &= ~BDRV_O_CACHE_WB;
3481 int bdrv_is_encrypted(BlockDriverState *bs)
3483 if (bs->backing_hd && bs->backing_hd->encrypted)
3484 return 1;
3485 return bs->encrypted;
3488 int bdrv_key_required(BlockDriverState *bs)
3490 BlockDriverState *backing_hd = bs->backing_hd;
3492 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3493 return 1;
3494 return (bs->encrypted && !bs->valid_key);
3497 int bdrv_set_key(BlockDriverState *bs, const char *key)
3499 int ret;
3500 if (bs->backing_hd && bs->backing_hd->encrypted) {
3501 ret = bdrv_set_key(bs->backing_hd, key);
3502 if (ret < 0)
3503 return ret;
3504 if (!bs->encrypted)
3505 return 0;
3507 if (!bs->encrypted) {
3508 return -EINVAL;
3509 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3510 return -ENOMEDIUM;
3512 ret = bs->drv->bdrv_set_key(bs, key);
3513 if (ret < 0) {
3514 bs->valid_key = 0;
3515 } else if (!bs->valid_key) {
3516 bs->valid_key = 1;
3517 /* call the change callback now, we skipped it on open */
3518 bdrv_dev_change_media_cb(bs, true);
3520 return ret;
3523 const char *bdrv_get_format_name(BlockDriverState *bs)
3525 return bs->drv ? bs->drv->format_name : NULL;
3528 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3529 void *opaque)
3531 BlockDriver *drv;
3533 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3534 it(opaque, drv->format_name);
3538 /* This function is to find block backend bs */
3539 BlockDriverState *bdrv_find(const char *name)
3541 BlockDriverState *bs;
3543 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3544 if (!strcmp(name, bs->device_name)) {
3545 return bs;
3548 return NULL;
3551 /* This function is to find a node in the bs graph */
3552 BlockDriverState *bdrv_find_node(const char *node_name)
3554 BlockDriverState *bs;
3556 assert(node_name);
3558 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3559 if (!strcmp(node_name, bs->node_name)) {
3560 return bs;
3563 return NULL;
3566 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3567 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3569 BlockDeviceInfoList *list, *entry;
3570 BlockDriverState *bs;
3572 list = NULL;
3573 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3574 entry = g_malloc0(sizeof(*entry));
3575 entry->value = bdrv_block_device_info(bs);
3576 entry->next = list;
3577 list = entry;
3580 return list;
3583 BlockDriverState *bdrv_lookup_bs(const char *device,
3584 const char *node_name,
3585 Error **errp)
3587 BlockDriverState *bs = NULL;
3589 if (device) {
3590 bs = bdrv_find(device);
3592 if (bs) {
3593 return bs;
3597 if (node_name) {
3598 bs = bdrv_find_node(node_name);
3600 if (bs) {
3601 return bs;
3605 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3606 device ? device : "",
3607 node_name ? node_name : "");
3608 return NULL;
3611 BlockDriverState *bdrv_next(BlockDriverState *bs)
3613 if (!bs) {
3614 return QTAILQ_FIRST(&bdrv_states);
3616 return QTAILQ_NEXT(bs, device_list);
3619 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3621 BlockDriverState *bs;
3623 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3624 it(opaque, bs);
3628 const char *bdrv_get_device_name(BlockDriverState *bs)
3630 return bs->device_name;
3633 int bdrv_get_flags(BlockDriverState *bs)
3635 return bs->open_flags;
3638 int bdrv_flush_all(void)
3640 BlockDriverState *bs;
3641 int result = 0;
3643 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3644 int ret = bdrv_flush(bs);
3645 if (ret < 0 && !result) {
3646 result = ret;
3650 return result;
3653 int bdrv_has_zero_init_1(BlockDriverState *bs)
3655 return 1;
3658 int bdrv_has_zero_init(BlockDriverState *bs)
3660 assert(bs->drv);
3662 /* If BS is a copy on write image, it is initialized to
3663 the contents of the base image, which may not be zeroes. */
3664 if (bs->backing_hd) {
3665 return 0;
3667 if (bs->drv->bdrv_has_zero_init) {
3668 return bs->drv->bdrv_has_zero_init(bs);
3671 /* safe default */
3672 return 0;
3675 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3677 BlockDriverInfo bdi;
3679 if (bs->backing_hd) {
3680 return false;
3683 if (bdrv_get_info(bs, &bdi) == 0) {
3684 return bdi.unallocated_blocks_are_zero;
3687 return false;
3690 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3692 BlockDriverInfo bdi;
3694 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3695 return false;
3698 if (bdrv_get_info(bs, &bdi) == 0) {
3699 return bdi.can_write_zeroes_with_unmap;
3702 return false;
3705 typedef struct BdrvCoGetBlockStatusData {
3706 BlockDriverState *bs;
3707 BlockDriverState *base;
3708 int64_t sector_num;
3709 int nb_sectors;
3710 int *pnum;
3711 int64_t ret;
3712 bool done;
3713 } BdrvCoGetBlockStatusData;
3716 * Returns true iff the specified sector is present in the disk image. Drivers
3717 * not implementing the functionality are assumed to not support backing files,
3718 * hence all their sectors are reported as allocated.
3720 * If 'sector_num' is beyond the end of the disk image the return value is 0
3721 * and 'pnum' is set to 0.
3723 * 'pnum' is set to the number of sectors (including and immediately following
3724 * the specified sector) that are known to be in the same
3725 * allocated/unallocated state.
3727 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3728 * beyond the end of the disk image it will be clamped.
3730 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3731 int64_t sector_num,
3732 int nb_sectors, int *pnum)
3734 int64_t length;
3735 int64_t n;
3736 int64_t ret, ret2;
3738 length = bdrv_getlength(bs);
3739 if (length < 0) {
3740 return length;
3743 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3744 *pnum = 0;
3745 return 0;
3748 n = bs->total_sectors - sector_num;
3749 if (n < nb_sectors) {
3750 nb_sectors = n;
3753 if (!bs->drv->bdrv_co_get_block_status) {
3754 *pnum = nb_sectors;
3755 ret = BDRV_BLOCK_DATA;
3756 if (bs->drv->protocol_name) {
3757 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3759 return ret;
3762 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3763 if (ret < 0) {
3764 *pnum = 0;
3765 return ret;
3768 if (ret & BDRV_BLOCK_RAW) {
3769 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3770 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3771 *pnum, pnum);
3774 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3775 if (bdrv_unallocated_blocks_are_zero(bs)) {
3776 ret |= BDRV_BLOCK_ZERO;
3777 } else if (bs->backing_hd) {
3778 BlockDriverState *bs2 = bs->backing_hd;
3779 int64_t length2 = bdrv_getlength(bs2);
3780 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3781 ret |= BDRV_BLOCK_ZERO;
3786 if (bs->file &&
3787 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3788 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3789 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3790 *pnum, pnum);
3791 if (ret2 >= 0) {
3792 /* Ignore errors. This is just providing extra information, it
3793 * is useful but not necessary.
3795 ret |= (ret2 & BDRV_BLOCK_ZERO);
3799 return ret;
3802 /* Coroutine wrapper for bdrv_get_block_status() */
3803 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3805 BdrvCoGetBlockStatusData *data = opaque;
3806 BlockDriverState *bs = data->bs;
3808 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3809 data->pnum);
3810 data->done = true;
3814 * Synchronous wrapper around bdrv_co_get_block_status().
3816 * See bdrv_co_get_block_status() for details.
3818 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3819 int nb_sectors, int *pnum)
3821 Coroutine *co;
3822 BdrvCoGetBlockStatusData data = {
3823 .bs = bs,
3824 .sector_num = sector_num,
3825 .nb_sectors = nb_sectors,
3826 .pnum = pnum,
3827 .done = false,
3830 if (qemu_in_coroutine()) {
3831 /* Fast-path if already in coroutine context */
3832 bdrv_get_block_status_co_entry(&data);
3833 } else {
3834 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3835 qemu_coroutine_enter(co, &data);
3836 while (!data.done) {
3837 qemu_aio_wait();
3840 return data.ret;
3843 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3844 int nb_sectors, int *pnum)
3846 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3847 if (ret < 0) {
3848 return ret;
3850 return
3851 (ret & BDRV_BLOCK_DATA) ||
3852 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3856 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3858 * Return true if the given sector is allocated in any image between
3859 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3860 * sector is allocated in any image of the chain. Return false otherwise.
3862 * 'pnum' is set to the number of sectors (including and immediately following
3863 * the specified sector) that are known to be in the same
3864 * allocated/unallocated state.
3867 int bdrv_is_allocated_above(BlockDriverState *top,
3868 BlockDriverState *base,
3869 int64_t sector_num,
3870 int nb_sectors, int *pnum)
3872 BlockDriverState *intermediate;
3873 int ret, n = nb_sectors;
3875 intermediate = top;
3876 while (intermediate && intermediate != base) {
3877 int pnum_inter;
3878 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3879 &pnum_inter);
3880 if (ret < 0) {
3881 return ret;
3882 } else if (ret) {
3883 *pnum = pnum_inter;
3884 return 1;
3888 * [sector_num, nb_sectors] is unallocated on top but intermediate
3889 * might have
3891 * [sector_num+x, nr_sectors] allocated.
3893 if (n > pnum_inter &&
3894 (intermediate == top ||
3895 sector_num + pnum_inter < intermediate->total_sectors)) {
3896 n = pnum_inter;
3899 intermediate = intermediate->backing_hd;
3902 *pnum = n;
3903 return 0;
3906 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3908 if (bs->backing_hd && bs->backing_hd->encrypted)
3909 return bs->backing_file;
3910 else if (bs->encrypted)
3911 return bs->filename;
3912 else
3913 return NULL;
3916 void bdrv_get_backing_filename(BlockDriverState *bs,
3917 char *filename, int filename_size)
3919 pstrcpy(filename, filename_size, bs->backing_file);
3922 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3923 const uint8_t *buf, int nb_sectors)
3925 BlockDriver *drv = bs->drv;
3926 if (!drv)
3927 return -ENOMEDIUM;
3928 if (!drv->bdrv_write_compressed)
3929 return -ENOTSUP;
3930 if (bdrv_check_request(bs, sector_num, nb_sectors))
3931 return -EIO;
3933 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3935 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3938 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3940 BlockDriver *drv = bs->drv;
3941 if (!drv)
3942 return -ENOMEDIUM;
3943 if (!drv->bdrv_get_info)
3944 return -ENOTSUP;
3945 memset(bdi, 0, sizeof(*bdi));
3946 return drv->bdrv_get_info(bs, bdi);
3949 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3951 BlockDriver *drv = bs->drv;
3952 if (drv && drv->bdrv_get_specific_info) {
3953 return drv->bdrv_get_specific_info(bs);
3955 return NULL;
3958 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3959 int64_t pos, int size)
3961 QEMUIOVector qiov;
3962 struct iovec iov = {
3963 .iov_base = (void *) buf,
3964 .iov_len = size,
3967 qemu_iovec_init_external(&qiov, &iov, 1);
3968 return bdrv_writev_vmstate(bs, &qiov, pos);
3971 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3973 BlockDriver *drv = bs->drv;
3975 if (!drv) {
3976 return -ENOMEDIUM;
3977 } else if (drv->bdrv_save_vmstate) {
3978 return drv->bdrv_save_vmstate(bs, qiov, pos);
3979 } else if (bs->file) {
3980 return bdrv_writev_vmstate(bs->file, qiov, pos);
3983 return -ENOTSUP;
3986 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3987 int64_t pos, int size)
3989 BlockDriver *drv = bs->drv;
3990 if (!drv)
3991 return -ENOMEDIUM;
3992 if (drv->bdrv_load_vmstate)
3993 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3994 if (bs->file)
3995 return bdrv_load_vmstate(bs->file, buf, pos, size);
3996 return -ENOTSUP;
3999 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4001 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4002 return;
4005 bs->drv->bdrv_debug_event(bs, event);
4008 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4009 const char *tag)
4011 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4012 bs = bs->file;
4015 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4016 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4019 return -ENOTSUP;
4022 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4024 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4025 bs = bs->file;
4028 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4029 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4032 return -ENOTSUP;
4035 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4037 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
4038 bs = bs->file;
4041 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4042 return bs->drv->bdrv_debug_resume(bs, tag);
4045 return -ENOTSUP;
4048 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4050 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4051 bs = bs->file;
4054 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4055 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4058 return false;
4061 int bdrv_is_snapshot(BlockDriverState *bs)
4063 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4066 /* backing_file can either be relative, or absolute, or a protocol. If it is
4067 * relative, it must be relative to the chain. So, passing in bs->filename
4068 * from a BDS as backing_file should not be done, as that may be relative to
4069 * the CWD rather than the chain. */
4070 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4071 const char *backing_file)
4073 char *filename_full = NULL;
4074 char *backing_file_full = NULL;
4075 char *filename_tmp = NULL;
4076 int is_protocol = 0;
4077 BlockDriverState *curr_bs = NULL;
4078 BlockDriverState *retval = NULL;
4080 if (!bs || !bs->drv || !backing_file) {
4081 return NULL;
4084 filename_full = g_malloc(PATH_MAX);
4085 backing_file_full = g_malloc(PATH_MAX);
4086 filename_tmp = g_malloc(PATH_MAX);
4088 is_protocol = path_has_protocol(backing_file);
4090 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4092 /* If either of the filename paths is actually a protocol, then
4093 * compare unmodified paths; otherwise make paths relative */
4094 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4095 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4096 retval = curr_bs->backing_hd;
4097 break;
4099 } else {
4100 /* If not an absolute filename path, make it relative to the current
4101 * image's filename path */
4102 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4103 backing_file);
4105 /* We are going to compare absolute pathnames */
4106 if (!realpath(filename_tmp, filename_full)) {
4107 continue;
4110 /* We need to make sure the backing filename we are comparing against
4111 * is relative to the current image filename (or absolute) */
4112 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4113 curr_bs->backing_file);
4115 if (!realpath(filename_tmp, backing_file_full)) {
4116 continue;
4119 if (strcmp(backing_file_full, filename_full) == 0) {
4120 retval = curr_bs->backing_hd;
4121 break;
4126 g_free(filename_full);
4127 g_free(backing_file_full);
4128 g_free(filename_tmp);
4129 return retval;
4132 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4134 if (!bs->drv) {
4135 return 0;
4138 if (!bs->backing_hd) {
4139 return 0;
4142 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4145 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4147 BlockDriverState *curr_bs = NULL;
4149 if (!bs) {
4150 return NULL;
4153 curr_bs = bs;
4155 while (curr_bs->backing_hd) {
4156 curr_bs = curr_bs->backing_hd;
4158 return curr_bs;
4161 /**************************************************************/
4162 /* async I/Os */
4164 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4165 QEMUIOVector *qiov, int nb_sectors,
4166 BlockDriverCompletionFunc *cb, void *opaque)
4168 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4170 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4171 cb, opaque, false);
4174 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4175 QEMUIOVector *qiov, int nb_sectors,
4176 BlockDriverCompletionFunc *cb, void *opaque)
4178 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4180 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4181 cb, opaque, true);
4184 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4185 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4186 BlockDriverCompletionFunc *cb, void *opaque)
4188 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4190 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4191 BDRV_REQ_ZERO_WRITE | flags,
4192 cb, opaque, true);
4196 typedef struct MultiwriteCB {
4197 int error;
4198 int num_requests;
4199 int num_callbacks;
4200 struct {
4201 BlockDriverCompletionFunc *cb;
4202 void *opaque;
4203 QEMUIOVector *free_qiov;
4204 } callbacks[];
4205 } MultiwriteCB;
4207 static void multiwrite_user_cb(MultiwriteCB *mcb)
4209 int i;
4211 for (i = 0; i < mcb->num_callbacks; i++) {
4212 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4213 if (mcb->callbacks[i].free_qiov) {
4214 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4216 g_free(mcb->callbacks[i].free_qiov);
4220 static void multiwrite_cb(void *opaque, int ret)
4222 MultiwriteCB *mcb = opaque;
4224 trace_multiwrite_cb(mcb, ret);
4226 if (ret < 0 && !mcb->error) {
4227 mcb->error = ret;
4230 mcb->num_requests--;
4231 if (mcb->num_requests == 0) {
4232 multiwrite_user_cb(mcb);
4233 g_free(mcb);
4237 static int multiwrite_req_compare(const void *a, const void *b)
4239 const BlockRequest *req1 = a, *req2 = b;
4242 * Note that we can't simply subtract req2->sector from req1->sector
4243 * here as that could overflow the return value.
4245 if (req1->sector > req2->sector) {
4246 return 1;
4247 } else if (req1->sector < req2->sector) {
4248 return -1;
4249 } else {
4250 return 0;
4255 * Takes a bunch of requests and tries to merge them. Returns the number of
4256 * requests that remain after merging.
4258 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4259 int num_reqs, MultiwriteCB *mcb)
4261 int i, outidx;
4263 // Sort requests by start sector
4264 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4266 // Check if adjacent requests touch the same clusters. If so, combine them,
4267 // filling up gaps with zero sectors.
4268 outidx = 0;
4269 for (i = 1; i < num_reqs; i++) {
4270 int merge = 0;
4271 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4273 // Handle exactly sequential writes and overlapping writes.
4274 if (reqs[i].sector <= oldreq_last) {
4275 merge = 1;
4278 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4279 merge = 0;
4282 if (merge) {
4283 size_t size;
4284 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4285 qemu_iovec_init(qiov,
4286 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4288 // Add the first request to the merged one. If the requests are
4289 // overlapping, drop the last sectors of the first request.
4290 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4291 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4293 // We should need to add any zeros between the two requests
4294 assert (reqs[i].sector <= oldreq_last);
4296 // Add the second request
4297 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4299 reqs[outidx].nb_sectors = qiov->size >> 9;
4300 reqs[outidx].qiov = qiov;
4302 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4303 } else {
4304 outidx++;
4305 reqs[outidx].sector = reqs[i].sector;
4306 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4307 reqs[outidx].qiov = reqs[i].qiov;
4311 return outidx + 1;
4315 * Submit multiple AIO write requests at once.
4317 * On success, the function returns 0 and all requests in the reqs array have
4318 * been submitted. In error case this function returns -1, and any of the
4319 * requests may or may not be submitted yet. In particular, this means that the
4320 * callback will be called for some of the requests, for others it won't. The
4321 * caller must check the error field of the BlockRequest to wait for the right
4322 * callbacks (if error != 0, no callback will be called).
4324 * The implementation may modify the contents of the reqs array, e.g. to merge
4325 * requests. However, the fields opaque and error are left unmodified as they
4326 * are used to signal failure for a single request to the caller.
4328 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4330 MultiwriteCB *mcb;
4331 int i;
4333 /* don't submit writes if we don't have a medium */
4334 if (bs->drv == NULL) {
4335 for (i = 0; i < num_reqs; i++) {
4336 reqs[i].error = -ENOMEDIUM;
4338 return -1;
4341 if (num_reqs == 0) {
4342 return 0;
4345 // Create MultiwriteCB structure
4346 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4347 mcb->num_requests = 0;
4348 mcb->num_callbacks = num_reqs;
4350 for (i = 0; i < num_reqs; i++) {
4351 mcb->callbacks[i].cb = reqs[i].cb;
4352 mcb->callbacks[i].opaque = reqs[i].opaque;
4355 // Check for mergable requests
4356 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4358 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4360 /* Run the aio requests. */
4361 mcb->num_requests = num_reqs;
4362 for (i = 0; i < num_reqs; i++) {
4363 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4364 reqs[i].nb_sectors, reqs[i].flags,
4365 multiwrite_cb, mcb,
4366 true);
4369 return 0;
4372 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4374 acb->aiocb_info->cancel(acb);
4377 /**************************************************************/
4378 /* async block device emulation */
4380 typedef struct BlockDriverAIOCBSync {
4381 BlockDriverAIOCB common;
4382 QEMUBH *bh;
4383 int ret;
4384 /* vector translation state */
4385 QEMUIOVector *qiov;
4386 uint8_t *bounce;
4387 int is_write;
4388 } BlockDriverAIOCBSync;
4390 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4392 BlockDriverAIOCBSync *acb =
4393 container_of(blockacb, BlockDriverAIOCBSync, common);
4394 qemu_bh_delete(acb->bh);
4395 acb->bh = NULL;
4396 qemu_aio_release(acb);
4399 static const AIOCBInfo bdrv_em_aiocb_info = {
4400 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4401 .cancel = bdrv_aio_cancel_em,
4404 static void bdrv_aio_bh_cb(void *opaque)
4406 BlockDriverAIOCBSync *acb = opaque;
4408 if (!acb->is_write)
4409 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4410 qemu_vfree(acb->bounce);
4411 acb->common.cb(acb->common.opaque, acb->ret);
4412 qemu_bh_delete(acb->bh);
4413 acb->bh = NULL;
4414 qemu_aio_release(acb);
4417 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4418 int64_t sector_num,
4419 QEMUIOVector *qiov,
4420 int nb_sectors,
4421 BlockDriverCompletionFunc *cb,
4422 void *opaque,
4423 int is_write)
4426 BlockDriverAIOCBSync *acb;
4428 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4429 acb->is_write = is_write;
4430 acb->qiov = qiov;
4431 acb->bounce = qemu_blockalign(bs, qiov->size);
4432 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4434 if (is_write) {
4435 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4436 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4437 } else {
4438 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4441 qemu_bh_schedule(acb->bh);
4443 return &acb->common;
4446 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4447 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4448 BlockDriverCompletionFunc *cb, void *opaque)
4450 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4453 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4454 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4455 BlockDriverCompletionFunc *cb, void *opaque)
4457 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4461 typedef struct BlockDriverAIOCBCoroutine {
4462 BlockDriverAIOCB common;
4463 BlockRequest req;
4464 bool is_write;
4465 bool *done;
4466 QEMUBH* bh;
4467 } BlockDriverAIOCBCoroutine;
4469 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4471 BlockDriverAIOCBCoroutine *acb =
4472 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4473 bool done = false;
4475 acb->done = &done;
4476 while (!done) {
4477 qemu_aio_wait();
4481 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4482 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4483 .cancel = bdrv_aio_co_cancel_em,
4486 static void bdrv_co_em_bh(void *opaque)
4488 BlockDriverAIOCBCoroutine *acb = opaque;
4490 acb->common.cb(acb->common.opaque, acb->req.error);
4492 if (acb->done) {
4493 *acb->done = true;
4496 qemu_bh_delete(acb->bh);
4497 qemu_aio_release(acb);
4500 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4501 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4503 BlockDriverAIOCBCoroutine *acb = opaque;
4504 BlockDriverState *bs = acb->common.bs;
4506 if (!acb->is_write) {
4507 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4508 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4509 } else {
4510 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4511 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4514 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4515 qemu_bh_schedule(acb->bh);
4518 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4519 int64_t sector_num,
4520 QEMUIOVector *qiov,
4521 int nb_sectors,
4522 BdrvRequestFlags flags,
4523 BlockDriverCompletionFunc *cb,
4524 void *opaque,
4525 bool is_write)
4527 Coroutine *co;
4528 BlockDriverAIOCBCoroutine *acb;
4530 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4531 acb->req.sector = sector_num;
4532 acb->req.nb_sectors = nb_sectors;
4533 acb->req.qiov = qiov;
4534 acb->req.flags = flags;
4535 acb->is_write = is_write;
4536 acb->done = NULL;
4538 co = qemu_coroutine_create(bdrv_co_do_rw);
4539 qemu_coroutine_enter(co, acb);
4541 return &acb->common;
4544 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4546 BlockDriverAIOCBCoroutine *acb = opaque;
4547 BlockDriverState *bs = acb->common.bs;
4549 acb->req.error = bdrv_co_flush(bs);
4550 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4551 qemu_bh_schedule(acb->bh);
4554 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4555 BlockDriverCompletionFunc *cb, void *opaque)
4557 trace_bdrv_aio_flush(bs, opaque);
4559 Coroutine *co;
4560 BlockDriverAIOCBCoroutine *acb;
4562 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4563 acb->done = NULL;
4565 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4566 qemu_coroutine_enter(co, acb);
4568 return &acb->common;
4571 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4573 BlockDriverAIOCBCoroutine *acb = opaque;
4574 BlockDriverState *bs = acb->common.bs;
4576 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4577 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4578 qemu_bh_schedule(acb->bh);
4581 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4582 int64_t sector_num, int nb_sectors,
4583 BlockDriverCompletionFunc *cb, void *opaque)
4585 Coroutine *co;
4586 BlockDriverAIOCBCoroutine *acb;
4588 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4590 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4591 acb->req.sector = sector_num;
4592 acb->req.nb_sectors = nb_sectors;
4593 acb->done = NULL;
4594 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4595 qemu_coroutine_enter(co, acb);
4597 return &acb->common;
4600 void bdrv_init(void)
4602 module_call_init(MODULE_INIT_BLOCK);
4605 void bdrv_init_with_whitelist(void)
4607 use_bdrv_whitelist = 1;
4608 bdrv_init();
4611 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4612 BlockDriverCompletionFunc *cb, void *opaque)
4614 BlockDriverAIOCB *acb;
4616 acb = g_slice_alloc(aiocb_info->aiocb_size);
4617 acb->aiocb_info = aiocb_info;
4618 acb->bs = bs;
4619 acb->cb = cb;
4620 acb->opaque = opaque;
4621 return acb;
4624 void qemu_aio_release(void *p)
4626 BlockDriverAIOCB *acb = p;
4627 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4630 /**************************************************************/
4631 /* Coroutine block device emulation */
4633 typedef struct CoroutineIOCompletion {
4634 Coroutine *coroutine;
4635 int ret;
4636 } CoroutineIOCompletion;
4638 static void bdrv_co_io_em_complete(void *opaque, int ret)
4640 CoroutineIOCompletion *co = opaque;
4642 co->ret = ret;
4643 qemu_coroutine_enter(co->coroutine, NULL);
4646 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4647 int nb_sectors, QEMUIOVector *iov,
4648 bool is_write)
4650 CoroutineIOCompletion co = {
4651 .coroutine = qemu_coroutine_self(),
4653 BlockDriverAIOCB *acb;
4655 if (is_write) {
4656 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4657 bdrv_co_io_em_complete, &co);
4658 } else {
4659 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4660 bdrv_co_io_em_complete, &co);
4663 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4664 if (!acb) {
4665 return -EIO;
4667 qemu_coroutine_yield();
4669 return co.ret;
4672 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4673 int64_t sector_num, int nb_sectors,
4674 QEMUIOVector *iov)
4676 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4679 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4680 int64_t sector_num, int nb_sectors,
4681 QEMUIOVector *iov)
4683 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4686 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4688 RwCo *rwco = opaque;
4690 rwco->ret = bdrv_co_flush(rwco->bs);
4693 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4695 int ret;
4697 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4698 return 0;
4701 /* Write back cached data to the OS even with cache=unsafe */
4702 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4703 if (bs->drv->bdrv_co_flush_to_os) {
4704 ret = bs->drv->bdrv_co_flush_to_os(bs);
4705 if (ret < 0) {
4706 return ret;
4710 /* But don't actually force it to the disk with cache=unsafe */
4711 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4712 goto flush_parent;
4715 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4716 if (bs->drv->bdrv_co_flush_to_disk) {
4717 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4718 } else if (bs->drv->bdrv_aio_flush) {
4719 BlockDriverAIOCB *acb;
4720 CoroutineIOCompletion co = {
4721 .coroutine = qemu_coroutine_self(),
4724 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4725 if (acb == NULL) {
4726 ret = -EIO;
4727 } else {
4728 qemu_coroutine_yield();
4729 ret = co.ret;
4731 } else {
4733 * Some block drivers always operate in either writethrough or unsafe
4734 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4735 * know how the server works (because the behaviour is hardcoded or
4736 * depends on server-side configuration), so we can't ensure that
4737 * everything is safe on disk. Returning an error doesn't work because
4738 * that would break guests even if the server operates in writethrough
4739 * mode.
4741 * Let's hope the user knows what he's doing.
4743 ret = 0;
4745 if (ret < 0) {
4746 return ret;
4749 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4750 * in the case of cache=unsafe, so there are no useless flushes.
4752 flush_parent:
4753 return bdrv_co_flush(bs->file);
4756 void bdrv_invalidate_cache(BlockDriverState *bs)
4758 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4759 bs->drv->bdrv_invalidate_cache(bs);
4763 void bdrv_invalidate_cache_all(void)
4765 BlockDriverState *bs;
4767 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4768 bdrv_invalidate_cache(bs);
4772 void bdrv_clear_incoming_migration_all(void)
4774 BlockDriverState *bs;
4776 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4777 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4781 int bdrv_flush(BlockDriverState *bs)
4783 Coroutine *co;
4784 RwCo rwco = {
4785 .bs = bs,
4786 .ret = NOT_DONE,
4789 if (qemu_in_coroutine()) {
4790 /* Fast-path if already in coroutine context */
4791 bdrv_flush_co_entry(&rwco);
4792 } else {
4793 co = qemu_coroutine_create(bdrv_flush_co_entry);
4794 qemu_coroutine_enter(co, &rwco);
4795 while (rwco.ret == NOT_DONE) {
4796 qemu_aio_wait();
4800 return rwco.ret;
4803 typedef struct DiscardCo {
4804 BlockDriverState *bs;
4805 int64_t sector_num;
4806 int nb_sectors;
4807 int ret;
4808 } DiscardCo;
4809 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4811 DiscardCo *rwco = opaque;
4813 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4816 /* if no limit is specified in the BlockLimits use a default
4817 * of 32768 512-byte sectors (16 MiB) per request.
4819 #define MAX_DISCARD_DEFAULT 32768
4821 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4822 int nb_sectors)
4824 int max_discard;
4826 if (!bs->drv) {
4827 return -ENOMEDIUM;
4828 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4829 return -EIO;
4830 } else if (bs->read_only) {
4831 return -EROFS;
4834 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4836 /* Do nothing if disabled. */
4837 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4838 return 0;
4841 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4842 return 0;
4845 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4846 while (nb_sectors > 0) {
4847 int ret;
4848 int num = nb_sectors;
4850 /* align request */
4851 if (bs->bl.discard_alignment &&
4852 num >= bs->bl.discard_alignment &&
4853 sector_num % bs->bl.discard_alignment) {
4854 if (num > bs->bl.discard_alignment) {
4855 num = bs->bl.discard_alignment;
4857 num -= sector_num % bs->bl.discard_alignment;
4860 /* limit request size */
4861 if (num > max_discard) {
4862 num = max_discard;
4865 if (bs->drv->bdrv_co_discard) {
4866 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4867 } else {
4868 BlockDriverAIOCB *acb;
4869 CoroutineIOCompletion co = {
4870 .coroutine = qemu_coroutine_self(),
4873 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4874 bdrv_co_io_em_complete, &co);
4875 if (acb == NULL) {
4876 return -EIO;
4877 } else {
4878 qemu_coroutine_yield();
4879 ret = co.ret;
4882 if (ret && ret != -ENOTSUP) {
4883 return ret;
4886 sector_num += num;
4887 nb_sectors -= num;
4889 return 0;
4892 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4894 Coroutine *co;
4895 DiscardCo rwco = {
4896 .bs = bs,
4897 .sector_num = sector_num,
4898 .nb_sectors = nb_sectors,
4899 .ret = NOT_DONE,
4902 if (qemu_in_coroutine()) {
4903 /* Fast-path if already in coroutine context */
4904 bdrv_discard_co_entry(&rwco);
4905 } else {
4906 co = qemu_coroutine_create(bdrv_discard_co_entry);
4907 qemu_coroutine_enter(co, &rwco);
4908 while (rwco.ret == NOT_DONE) {
4909 qemu_aio_wait();
4913 return rwco.ret;
4916 /**************************************************************/
4917 /* removable device support */
4920 * Return TRUE if the media is present
4922 int bdrv_is_inserted(BlockDriverState *bs)
4924 BlockDriver *drv = bs->drv;
4926 if (!drv)
4927 return 0;
4928 if (!drv->bdrv_is_inserted)
4929 return 1;
4930 return drv->bdrv_is_inserted(bs);
4934 * Return whether the media changed since the last call to this
4935 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4937 int bdrv_media_changed(BlockDriverState *bs)
4939 BlockDriver *drv = bs->drv;
4941 if (drv && drv->bdrv_media_changed) {
4942 return drv->bdrv_media_changed(bs);
4944 return -ENOTSUP;
4948 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4950 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4952 BlockDriver *drv = bs->drv;
4954 if (drv && drv->bdrv_eject) {
4955 drv->bdrv_eject(bs, eject_flag);
4958 if (bs->device_name[0] != '\0') {
4959 bdrv_emit_qmp_eject_event(bs, eject_flag);
4964 * Lock or unlock the media (if it is locked, the user won't be able
4965 * to eject it manually).
4967 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4969 BlockDriver *drv = bs->drv;
4971 trace_bdrv_lock_medium(bs, locked);
4973 if (drv && drv->bdrv_lock_medium) {
4974 drv->bdrv_lock_medium(bs, locked);
4978 /* needed for generic scsi interface */
4980 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4982 BlockDriver *drv = bs->drv;
4984 if (drv && drv->bdrv_ioctl)
4985 return drv->bdrv_ioctl(bs, req, buf);
4986 return -ENOTSUP;
4989 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4990 unsigned long int req, void *buf,
4991 BlockDriverCompletionFunc *cb, void *opaque)
4993 BlockDriver *drv = bs->drv;
4995 if (drv && drv->bdrv_aio_ioctl)
4996 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4997 return NULL;
5000 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5002 bs->guest_block_size = align;
5005 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5007 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5011 * Check if all memory in this vector is sector aligned.
5013 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5015 int i;
5016 size_t alignment = bdrv_opt_mem_align(bs);
5018 for (i = 0; i < qiov->niov; i++) {
5019 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5020 return false;
5022 if (qiov->iov[i].iov_len % alignment) {
5023 return false;
5027 return true;
5030 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
5032 int64_t bitmap_size;
5033 BdrvDirtyBitmap *bitmap;
5035 assert((granularity & (granularity - 1)) == 0);
5037 granularity >>= BDRV_SECTOR_BITS;
5038 assert(granularity);
5039 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
5040 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5041 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5042 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5043 return bitmap;
5046 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5048 BdrvDirtyBitmap *bm, *next;
5049 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5050 if (bm == bitmap) {
5051 QLIST_REMOVE(bitmap, list);
5052 hbitmap_free(bitmap->bitmap);
5053 g_free(bitmap);
5054 return;
5059 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5061 BdrvDirtyBitmap *bm;
5062 BlockDirtyInfoList *list = NULL;
5063 BlockDirtyInfoList **plist = &list;
5065 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5066 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5067 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5068 info->count = bdrv_get_dirty_count(bs, bm);
5069 info->granularity =
5070 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5071 entry->value = info;
5072 *plist = entry;
5073 plist = &entry->next;
5076 return list;
5079 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5081 if (bitmap) {
5082 return hbitmap_get(bitmap->bitmap, sector);
5083 } else {
5084 return 0;
5088 void bdrv_dirty_iter_init(BlockDriverState *bs,
5089 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5091 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5094 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5095 int nr_sectors)
5097 BdrvDirtyBitmap *bitmap;
5098 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5099 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5103 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5105 BdrvDirtyBitmap *bitmap;
5106 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5107 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5111 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5113 return hbitmap_count(bitmap->bitmap);
5116 /* Get a reference to bs */
5117 void bdrv_ref(BlockDriverState *bs)
5119 bs->refcnt++;
5122 /* Release a previously grabbed reference to bs.
5123 * If after releasing, reference count is zero, the BlockDriverState is
5124 * deleted. */
5125 void bdrv_unref(BlockDriverState *bs)
5127 assert(bs->refcnt > 0);
5128 if (--bs->refcnt == 0) {
5129 bdrv_delete(bs);
5133 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5135 assert(bs->in_use != in_use);
5136 bs->in_use = in_use;
5139 int bdrv_in_use(BlockDriverState *bs)
5141 return bs->in_use;
5144 void bdrv_iostatus_enable(BlockDriverState *bs)
5146 bs->iostatus_enabled = true;
5147 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5150 /* The I/O status is only enabled if the drive explicitly
5151 * enables it _and_ the VM is configured to stop on errors */
5152 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5154 return (bs->iostatus_enabled &&
5155 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5156 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5157 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5160 void bdrv_iostatus_disable(BlockDriverState *bs)
5162 bs->iostatus_enabled = false;
5165 void bdrv_iostatus_reset(BlockDriverState *bs)
5167 if (bdrv_iostatus_is_enabled(bs)) {
5168 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5169 if (bs->job) {
5170 block_job_iostatus_reset(bs->job);
5175 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5177 assert(bdrv_iostatus_is_enabled(bs));
5178 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5179 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5180 BLOCK_DEVICE_IO_STATUS_FAILED;
5184 void
5185 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5186 enum BlockAcctType type)
5188 assert(type < BDRV_MAX_IOTYPE);
5190 cookie->bytes = bytes;
5191 cookie->start_time_ns = get_clock();
5192 cookie->type = type;
5195 void
5196 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5198 assert(cookie->type < BDRV_MAX_IOTYPE);
5200 bs->nr_bytes[cookie->type] += cookie->bytes;
5201 bs->nr_ops[cookie->type]++;
5202 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5205 void bdrv_img_create(const char *filename, const char *fmt,
5206 const char *base_filename, const char *base_fmt,
5207 char *options, uint64_t img_size, int flags,
5208 Error **errp, bool quiet)
5210 QEMUOptionParameter *param = NULL, *create_options = NULL;
5211 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5212 BlockDriver *drv, *proto_drv;
5213 BlockDriver *backing_drv = NULL;
5214 Error *local_err = NULL;
5215 int ret = 0;
5217 /* Find driver and parse its options */
5218 drv = bdrv_find_format(fmt);
5219 if (!drv) {
5220 error_setg(errp, "Unknown file format '%s'", fmt);
5221 return;
5224 proto_drv = bdrv_find_protocol(filename, true);
5225 if (!proto_drv) {
5226 error_setg(errp, "Unknown protocol '%s'", filename);
5227 return;
5230 create_options = append_option_parameters(create_options,
5231 drv->create_options);
5232 create_options = append_option_parameters(create_options,
5233 proto_drv->create_options);
5235 /* Create parameter list with default values */
5236 param = parse_option_parameters("", create_options, param);
5238 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5240 /* Parse -o options */
5241 if (options) {
5242 param = parse_option_parameters(options, create_options, param);
5243 if (param == NULL) {
5244 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5245 goto out;
5249 if (base_filename) {
5250 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5251 base_filename)) {
5252 error_setg(errp, "Backing file not supported for file format '%s'",
5253 fmt);
5254 goto out;
5258 if (base_fmt) {
5259 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5260 error_setg(errp, "Backing file format not supported for file "
5261 "format '%s'", fmt);
5262 goto out;
5266 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5267 if (backing_file && backing_file->value.s) {
5268 if (!strcmp(filename, backing_file->value.s)) {
5269 error_setg(errp, "Error: Trying to create an image with the "
5270 "same filename as the backing file");
5271 goto out;
5275 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5276 if (backing_fmt && backing_fmt->value.s) {
5277 backing_drv = bdrv_find_format(backing_fmt->value.s);
5278 if (!backing_drv) {
5279 error_setg(errp, "Unknown backing file format '%s'",
5280 backing_fmt->value.s);
5281 goto out;
5285 // The size for the image must always be specified, with one exception:
5286 // If we are using a backing file, we can obtain the size from there
5287 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5288 if (size && size->value.n == -1) {
5289 if (backing_file && backing_file->value.s) {
5290 BlockDriverState *bs;
5291 uint64_t size;
5292 char buf[32];
5293 int back_flags;
5295 /* backing files always opened read-only */
5296 back_flags =
5297 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5299 bs = NULL;
5300 ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags,
5301 backing_drv, &local_err);
5302 if (ret < 0) {
5303 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5304 backing_file->value.s,
5305 error_get_pretty(local_err));
5306 error_free(local_err);
5307 local_err = NULL;
5308 goto out;
5310 bdrv_get_geometry(bs, &size);
5311 size *= 512;
5313 snprintf(buf, sizeof(buf), "%" PRId64, size);
5314 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5316 bdrv_unref(bs);
5317 } else {
5318 error_setg(errp, "Image creation needs a size parameter");
5319 goto out;
5323 if (!quiet) {
5324 printf("Formatting '%s', fmt=%s ", filename, fmt);
5325 print_option_parameters(param);
5326 puts("");
5328 ret = bdrv_create(drv, filename, param, &local_err);
5329 if (ret == -EFBIG) {
5330 /* This is generally a better message than whatever the driver would
5331 * deliver (especially because of the cluster_size_hint), since that
5332 * is most probably not much different from "image too large". */
5333 const char *cluster_size_hint = "";
5334 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5335 cluster_size_hint = " (try using a larger cluster size)";
5337 error_setg(errp, "The image size is too large for file format '%s'"
5338 "%s", fmt, cluster_size_hint);
5339 error_free(local_err);
5340 local_err = NULL;
5343 out:
5344 free_option_parameters(create_options);
5345 free_option_parameters(param);
5347 if (local_err) {
5348 error_propagate(errp, local_err);
5352 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5354 /* Currently BlockDriverState always uses the main loop AioContext */
5355 return qemu_get_aio_context();
5358 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5359 NotifierWithReturn *notifier)
5361 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5364 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5366 if (bs->drv->bdrv_amend_options == NULL) {
5367 return -ENOTSUP;
5369 return bs->drv->bdrv_amend_options(bs, options);
5372 /* Used to recurse on single child block filters.
5373 * Single child block filter will store their child in bs->file.
5375 bool bdrv_generic_is_first_non_filter(BlockDriverState *bs,
5376 BlockDriverState *candidate)
5378 if (!bs->drv) {
5379 return false;
5382 if (!bs->drv->authorizations[BS_IS_A_FILTER]) {
5383 if (bs == candidate) {
5384 return true;
5385 } else {
5386 return false;
5390 if (!bs->drv->authorizations[BS_FILTER_PASS_DOWN]) {
5391 return false;
5394 if (!bs->file) {
5395 return false;
5398 return bdrv_recurse_is_first_non_filter(bs->file, candidate);
5401 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5402 BlockDriverState *candidate)
5404 if (bs->drv && bs->drv->bdrv_recurse_is_first_non_filter) {
5405 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5408 return bdrv_generic_is_first_non_filter(bs, candidate);
5411 /* This function checks if the candidate is the first non filter bs down it's
5412 * bs chain. Since we don't have pointers to parents it explore all bs chains
5413 * from the top. Some filters can choose not to pass down the recursion.
5415 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5417 BlockDriverState *bs;
5419 /* walk down the bs forest recursively */
5420 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5421 bool perm;
5423 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5425 /* candidate is the first non filter */
5426 if (perm) {
5427 return true;
5431 return false;