hw/block/nand.c

   1 /*
   2  * Flash NAND memory emulation.  Based on "16M x 8 Bit NAND Flash
   3  * Memory" datasheet for the KM29U128AT / K9F2808U0A chips from
   4  * Samsung Electronic.
   5  *
   6  * Copyright (c) 2006 Openedhand Ltd.
   7  * Written by Andrzej Zaborowski <balrog@zabor.org>
   8  *
   9  * Support for additional features based on "MT29F2G16ABCWP 2Gx16"
  10  * datasheet from Micron Technology and "NAND02G-B2C" datasheet
  11  * from ST Microelectronics.
  12  *
  13  * This code is licensed under the GNU GPL v2.
  14  *
  15  * Contributions after 2012-01-13 are licensed under the terms of the
  16  * GNU GPL, version 2 or (at your option) any later version.
  17  */
  18
  19 #ifndef NAND_IO
  20
  21 # include "hw/hw.h"
  22 # include "hw/block/flash.h"
  23 #include "sysemu/block-backend.h"
  24 #include "hw/qdev.h"
  25 #include "qemu/error-report.h"
  26
  27 # define NAND_CMD_READ0         0x00
  28 # define NAND_CMD_READ1         0x01
  29 # define NAND_CMD_READ2         0x50
  30 # define NAND_CMD_LPREAD2       0x30
  31 # define NAND_CMD_NOSERIALREAD2 0x35
  32 # define NAND_CMD_RANDOMREAD1   0x05
  33 # define NAND_CMD_RANDOMREAD2   0xe0
  34 # define NAND_CMD_READID        0x90
  35 # define NAND_CMD_RESET         0xff
  36 # define NAND_CMD_PAGEPROGRAM1  0x80
  37 # define NAND_CMD_PAGEPROGRAM2  0x10
  38 # define NAND_CMD_CACHEPROGRAM2 0x15
  39 # define NAND_CMD_BLOCKERASE1   0x60
  40 # define NAND_CMD_BLOCKERASE2   0xd0
  41 # define NAND_CMD_READSTATUS    0x70
  42 # define NAND_CMD_COPYBACKPRG1  0x85
  43
  44 # define NAND_IOSTATUS_ERROR    (1 << 0)
  45 # define NAND_IOSTATUS_PLANE0   (1 << 1)
  46 # define NAND_IOSTATUS_PLANE1   (1 << 2)
  47 # define NAND_IOSTATUS_PLANE2   (1 << 3)
  48 # define NAND_IOSTATUS_PLANE3   (1 << 4)
  49 # define NAND_IOSTATUS_READY    (1 << 6)
  50 # define NAND_IOSTATUS_UNPROTCT (1 << 7)
  51
  52 # define MAX_PAGE               0x800
  53 # define MAX_OOB                0x40
  54
  55 typedef struct NANDFlashState NANDFlashState;
  56 struct NANDFlashState {
  57     DeviceState parent_obj;
  58
  59     uint8_t manf_id, chip_id;
  60     uint8_t buswidth; /* in BYTES */
  61     int size, pages;
  62     int page_shift, oob_shift, erase_shift, addr_shift;
  63     uint8_t *storage;
  64     BlockBackend *blk;
  65     int mem_oob;
  66
  67     uint8_t cle, ale, ce, wp, gnd;
  68
  69     uint8_t io[MAX_PAGE + MAX_OOB + 0x400];
  70     uint8_t *ioaddr;
  71     int iolen;
  72
  73     uint32_t cmd;
  74     uint64_t addr;
  75     int addrlen;
  76     int status;
  77     int offset;
  78
  79     void (*blk_write)(NANDFlashState *s);
  80     void (*blk_erase)(NANDFlashState *s);
  81     void (*blk_load)(NANDFlashState *s, uint64_t addr, int offset);
  82
  83     uint32_t ioaddr_vmstate;
  84 };
  85
  86 #define TYPE_NAND "nand"
  87
  88 #define NAND(obj) \
  89     OBJECT_CHECK(NANDFlashState, (obj), TYPE_NAND)
  90
  91 static void mem_and(uint8_t *dest, const uint8_t *src, size_t n)
  92 {
  93     /* Like memcpy() but we logical-AND the data into the destination */
  94     int i;
  95     for (i = 0; i < n; i++) {
  96         dest[i] &= src[i];
  97     }
  98 }
  99
 100 # define NAND_NO_AUTOINCR       0x00000001
 101 # define NAND_BUSWIDTH_16       0x00000002
 102 # define NAND_NO_PADDING        0x00000004
 103 # define NAND_CACHEPRG          0x00000008
 104 # define NAND_COPYBACK          0x00000010
 105 # define NAND_IS_AND            0x00000020
 106 # define NAND_4PAGE_ARRAY       0x00000040
 107 # define NAND_NO_READRDY        0x00000100
 108 # define NAND_SAMSUNG_LP        (NAND_NO_PADDING | NAND_COPYBACK)
 109
 110 # define NAND_IO
 111
 112 # define PAGE(addr)             ((addr) >> ADDR_SHIFT)
 113 # define PAGE_START(page)       (PAGE(page) * (PAGE_SIZE + OOB_SIZE))
 114 # define PAGE_MASK              ((1 << ADDR_SHIFT) - 1)
 115 # define OOB_SHIFT              (PAGE_SHIFT - 5)
 116 # define OOB_SIZE               (1 << OOB_SHIFT)
 117 # define SECTOR(addr)           ((addr) >> (9 + ADDR_SHIFT - PAGE_SHIFT))
 118 # define SECTOR_OFFSET(addr)    ((addr) & ((511 >> PAGE_SHIFT) << 8))
 119
 120 # define PAGE_SIZE              256
 121 # define PAGE_SHIFT             8
 122 # define PAGE_SECTORS           1
 123 # define ADDR_SHIFT             8
 124 # include "nand.c"
 125 # define PAGE_SIZE              512
 126 # define PAGE_SHIFT             9
 127 # define PAGE_SECTORS           1
 128 # define ADDR_SHIFT             8
 129 # include "nand.c"
 130 # define PAGE_SIZE              2048
 131 # define PAGE_SHIFT             11
 132 # define PAGE_SECTORS           4
 133 # define ADDR_SHIFT             16
 134 # include "nand.c"
 135
 136 /* Information based on Linux drivers/mtd/nand/nand_ids.c */
 137 static const struct {
 138     int size;
 139     int width;
 140     int page_shift;
 141     int erase_shift;
 142     uint32_t options;
 143 } nand_flash_ids[0x100] = {
 144     [0 ... 0xff] = { 0 },
 145
 146     [0x6e] = { 1,       8,      8, 4, 0 },
 147     [0x64] = { 2,       8,      8, 4, 0 },
 148     [0x6b] = { 4,       8,      9, 4, 0 },
 149     [0xe8] = { 1,       8,      8, 4, 0 },
 150     [0xec] = { 1,       8,      8, 4, 0 },
 151     [0xea] = { 2,       8,      8, 4, 0 },
 152     [0xd5] = { 4,       8,      9, 4, 0 },
 153     [0xe3] = { 4,       8,      9, 4, 0 },
 154     [0xe5] = { 4,       8,      9, 4, 0 },
 155     [0xd6] = { 8,       8,      9, 4, 0 },
 156
 157     [0x39] = { 8,       8,      9, 4, 0 },
 158     [0xe6] = { 8,       8,      9, 4, 0 },
 159     [0x49] = { 8,       16,     9, 4, NAND_BUSWIDTH_16 },
 160     [0x59] = { 8,       16,     9, 4, NAND_BUSWIDTH_16 },
 161
 162     [0x33] = { 16,      8,      9, 5, 0 },
 163     [0x73] = { 16,      8,      9, 5, 0 },
 164     [0x43] = { 16,      16,     9, 5, NAND_BUSWIDTH_16 },
 165     [0x53] = { 16,      16,     9, 5, NAND_BUSWIDTH_16 },
 166
 167     [0x35] = { 32,      8,      9, 5, 0 },
 168     [0x75] = { 32,      8,      9, 5, 0 },
 169     [0x45] = { 32,      16,     9, 5, NAND_BUSWIDTH_16 },
 170     [0x55] = { 32,      16,     9, 5, NAND_BUSWIDTH_16 },
 171
 172     [0x36] = { 64,      8,      9, 5, 0 },
 173     [0x76] = { 64,      8,      9, 5, 0 },
 174     [0x46] = { 64,      16,     9, 5, NAND_BUSWIDTH_16 },
 175     [0x56] = { 64,      16,     9, 5, NAND_BUSWIDTH_16 },
 176
 177     [0x78] = { 128,     8,      9, 5, 0 },
 178     [0x39] = { 128,     8,      9, 5, 0 },
 179     [0x79] = { 128,     8,      9, 5, 0 },
 180     [0x72] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 181     [0x49] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 182     [0x74] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 183     [0x59] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 184
 185     [0x71] = { 256,     8,      9, 5, 0 },
 186
 187     /*
 188      * These are the new chips with large page size. The pagesize and the
 189      * erasesize is determined from the extended id bytes
 190      */
 191 # define LP_OPTIONS     (NAND_SAMSUNG_LP | NAND_NO_READRDY | NAND_NO_AUTOINCR)
 192 # define LP_OPTIONS16   (LP_OPTIONS | NAND_BUSWIDTH_16)
 193
 194     /* 512 Megabit */
 195     [0xa2] = { 64,      8,      0, 0, LP_OPTIONS },
 196     [0xf2] = { 64,      8,      0, 0, LP_OPTIONS },
 197     [0xb2] = { 64,      16,     0, 0, LP_OPTIONS16 },
 198     [0xc2] = { 64,      16,     0, 0, LP_OPTIONS16 },
 199
 200     /* 1 Gigabit */
 201     [0xa1] = { 128,     8,      0, 0, LP_OPTIONS },
 202     [0xf1] = { 128,     8,      0, 0, LP_OPTIONS },
 203     [0xb1] = { 128,     16,     0, 0, LP_OPTIONS16 },
 204     [0xc1] = { 128,     16,     0, 0, LP_OPTIONS16 },
 205
 206     /* 2 Gigabit */
 207     [0xaa] = { 256,     8,      0, 0, LP_OPTIONS },
 208     [0xda] = { 256,     8,      0, 0, LP_OPTIONS },
 209     [0xba] = { 256,     16,     0, 0, LP_OPTIONS16 },
 210     [0xca] = { 256,     16,     0, 0, LP_OPTIONS16 },
 211
 212     /* 4 Gigabit */
 213     [0xac] = { 512,     8,      0, 0, LP_OPTIONS },
 214     [0xdc] = { 512,     8,      0, 0, LP_OPTIONS },
 215     [0xbc] = { 512,     16,     0, 0, LP_OPTIONS16 },
 216     [0xcc] = { 512,     16,     0, 0, LP_OPTIONS16 },
 217
 218     /* 8 Gigabit */
 219     [0xa3] = { 1024,    8,      0, 0, LP_OPTIONS },
 220     [0xd3] = { 1024,    8,      0, 0, LP_OPTIONS },
 221     [0xb3] = { 1024,    16,     0, 0, LP_OPTIONS16 },
 222     [0xc3] = { 1024,    16,     0, 0, LP_OPTIONS16 },
 223
 224     /* 16 Gigabit */
 225     [0xa5] = { 2048,    8,      0, 0, LP_OPTIONS },
 226     [0xd5] = { 2048,    8,      0, 0, LP_OPTIONS },
 227     [0xb5] = { 2048,    16,     0, 0, LP_OPTIONS16 },
 228     [0xc5] = { 2048,    16,     0, 0, LP_OPTIONS16 },
 229 };
 230
 231 static void nand_reset(DeviceState *dev)
 232 {
 233     NANDFlashState *s = NAND(dev);
 234     s->cmd = NAND_CMD_READ0;
 235     s->addr = 0;
 236     s->addrlen = 0;
 237     s->iolen = 0;
 238     s->offset = 0;
 239     s->status &= NAND_IOSTATUS_UNPROTCT;
 240     s->status |= NAND_IOSTATUS_READY;
 241 }
 242
 243 static inline void nand_pushio_byte(NANDFlashState *s, uint8_t value)
 244 {
 245     s->ioaddr[s->iolen++] = value;
 246     for (value = s->buswidth; --value;) {
 247         s->ioaddr[s->iolen++] = 0;
 248     }
 249 }
 250
 251 static void nand_command(NANDFlashState *s)
 252 {
 253     unsigned int offset;
 254     switch (s->cmd) {
 255     case NAND_CMD_READ0:
 256         s->iolen = 0;
 257         break;
 258
 259     case NAND_CMD_READID:
 260         s->ioaddr = s->io;
 261         s->iolen = 0;
 262         nand_pushio_byte(s, s->manf_id);
 263         nand_pushio_byte(s, s->chip_id);
 264         nand_pushio_byte(s, 'Q'); /* Don't-care byte (often 0xa5) */
 265         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
 266             /* Page Size, Block Size, Spare Size; bit 6 indicates
 267              * 8 vs 16 bit width NAND.
 268              */
 269             nand_pushio_byte(s, (s->buswidth == 2) ? 0x55 : 0x15);
 270         } else {
 271             nand_pushio_byte(s, 0xc0); /* Multi-plane */
 272         }
 273         break;
 274
 275     case NAND_CMD_RANDOMREAD2:
 276     case NAND_CMD_NOSERIALREAD2:
 277         if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP))
 278             break;
 279         offset = s->addr & ((1 << s->addr_shift) - 1);
 280         s->blk_load(s, s->addr, offset);
 281         if (s->gnd)
 282             s->iolen = (1 << s->page_shift) - offset;
 283         else
 284             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
 285         break;
 286
 287     case NAND_CMD_RESET:
 288         nand_reset(DEVICE(s));
 289         break;
 290
 291     case NAND_CMD_PAGEPROGRAM1:
 292         s->ioaddr = s->io;
 293         s->iolen = 0;
 294         break;
 295
 296     case NAND_CMD_PAGEPROGRAM2:
 297         if (s->wp) {
 298             s->blk_write(s);
 299         }
 300         break;
 301
 302     case NAND_CMD_BLOCKERASE1:
 303         break;
 304
 305     case NAND_CMD_BLOCKERASE2:
 306         s->addr &= (1ull << s->addrlen * 8) - 1;
 307         s->addr <<= nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP ?
 308                                                                     16 : 8;
 309
 310         if (s->wp) {
 311             s->blk_erase(s);
 312         }
 313         break;
 314
 315     case NAND_CMD_READSTATUS:
 316         s->ioaddr = s->io;
 317         s->iolen = 0;
 318         nand_pushio_byte(s, s->status);
 319         break;
 320
 321     default:
 322         printf("%s: Unknown NAND command 0x%02x\n", __FUNCTION__, s->cmd);
 323     }
 324 }
 325
 326 static void nand_pre_save(void *opaque)
 327 {
 328     NANDFlashState *s = NAND(opaque);
 329
 330     s->ioaddr_vmstate = s->ioaddr - s->io;
 331 }
 332
 333 static int nand_post_load(void *opaque, int version_id)
 334 {
 335     NANDFlashState *s = NAND(opaque);
 336
 337     if (s->ioaddr_vmstate > sizeof(s->io)) {
 338         return -EINVAL;
 339     }
 340     s->ioaddr = s->io + s->ioaddr_vmstate;
 341
 342     return 0;
 343 }
 344
 345 static const VMStateDescription vmstate_nand = {
 346     .name = "nand",
 347     .version_id = 1,
 348     .minimum_version_id = 1,
 349     .pre_save = nand_pre_save,
 350     .post_load = nand_post_load,
 351     .fields = (VMStateField[]) {
 352         VMSTATE_UINT8(cle, NANDFlashState),
 353         VMSTATE_UINT8(ale, NANDFlashState),
 354         VMSTATE_UINT8(ce, NANDFlashState),
 355         VMSTATE_UINT8(wp, NANDFlashState),
 356         VMSTATE_UINT8(gnd, NANDFlashState),
 357         VMSTATE_BUFFER(io, NANDFlashState),
 358         VMSTATE_UINT32(ioaddr_vmstate, NANDFlashState),
 359         VMSTATE_INT32(iolen, NANDFlashState),
 360         VMSTATE_UINT32(cmd, NANDFlashState),
 361         VMSTATE_UINT64(addr, NANDFlashState),
 362         VMSTATE_INT32(addrlen, NANDFlashState),
 363         VMSTATE_INT32(status, NANDFlashState),
 364         VMSTATE_INT32(offset, NANDFlashState),
 365         /* XXX: do we want to save s->storage too? */
 366         VMSTATE_END_OF_LIST()
 367     }
 368 };
 369
 370 static void nand_realize(DeviceState *dev, Error **errp)
 371 {
 372     int pagesize;
 373     NANDFlashState *s = NAND(dev);
 374
 375     s->buswidth = nand_flash_ids[s->chip_id].width >> 3;
 376     s->size = nand_flash_ids[s->chip_id].size << 20;
 377     if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
 378         s->page_shift = 11;
 379         s->erase_shift = 6;
 380     } else {
 381         s->page_shift = nand_flash_ids[s->chip_id].page_shift;
 382         s->erase_shift = nand_flash_ids[s->chip_id].erase_shift;
 383     }
 384
 385     switch (1 << s->page_shift) {
 386     case 256:
 387         nand_init_256(s);
 388         break;
 389     case 512:
 390         nand_init_512(s);
 391         break;
 392     case 2048:
 393         nand_init_2048(s);
 394         break;
 395     default:
 396         error_setg(errp, "Unsupported NAND block size %#x",
 397                    1 << s->page_shift);
 398         return;
 399     }
 400
 401     pagesize = 1 << s->oob_shift;
 402     s->mem_oob = 1;
 403     if (s->blk) {
 404         if (blk_is_read_only(s->blk)) {
 405             error_setg(errp, "Can't use a read-only drive");
 406             return;
 407         }
 408         if (blk_getlength(s->blk) >=
 409                 (s->pages << s->page_shift) + (s->pages << s->oob_shift)) {
 410             pagesize = 0;
 411             s->mem_oob = 0;
 412         }
 413     } else {
 414         pagesize += 1 << s->page_shift;
 415     }
 416     if (pagesize) {
 417         s->storage = (uint8_t *) memset(g_malloc(s->pages * pagesize),
 418                         0xff, s->pages * pagesize);
 419     }
 420     /* Give s->ioaddr a sane value in case we save state before it is used. */
 421     s->ioaddr = s->io;
 422 }
 423
 424 static Property nand_properties[] = {
 425     DEFINE_PROP_UINT8("manufacturer_id", NANDFlashState, manf_id, 0),
 426     DEFINE_PROP_UINT8("chip_id", NANDFlashState, chip_id, 0),
 427     DEFINE_PROP_DRIVE("drive", NANDFlashState, blk),
 428     DEFINE_PROP_END_OF_LIST(),
 429 };
 430
 431 static void nand_class_init(ObjectClass *klass, void *data)
 432 {
 433     DeviceClass *dc = DEVICE_CLASS(klass);
 434
 435     dc->realize = nand_realize;
 436     dc->reset = nand_reset;
 437     dc->vmsd = &vmstate_nand;
 438     dc->props = nand_properties;
 439 }
 440
 441 static const TypeInfo nand_info = {
 442     .name          = TYPE_NAND,
 443     .parent        = TYPE_DEVICE,
 444     .instance_size = sizeof(NANDFlashState),
 445     .class_init    = nand_class_init,
 446 };
 447
 448 static void nand_register_types(void)
 449 {
 450     type_register_static(&nand_info);
 451 }
 452
 453 /*
 454  * Chip inputs are CLE, ALE, CE, WP, GND and eight I/O pins.  Chip
 455  * outputs are R/B and eight I/O pins.
 456  *
 457  * CE, WP and R/B are active low.
 458  */
 459 void nand_setpins(DeviceState *dev, uint8_t cle, uint8_t ale,
 460                   uint8_t ce, uint8_t wp, uint8_t gnd)
 461 {
 462     NANDFlashState *s = NAND(dev);
 463
 464     s->cle = cle;
 465     s->ale = ale;
 466     s->ce = ce;
 467     s->wp = wp;
 468     s->gnd = gnd;
 469     if (wp) {
 470         s->status |= NAND_IOSTATUS_UNPROTCT;
 471     } else {
 472         s->status &= ~NAND_IOSTATUS_UNPROTCT;
 473     }
 474 }
 475
 476 void nand_getpins(DeviceState *dev, int *rb)
 477 {
 478     *rb = 1;
 479 }
 480
 481 void nand_setio(DeviceState *dev, uint32_t value)
 482 {
 483     int i;
 484     NANDFlashState *s = NAND(dev);
 485
 486     if (!s->ce && s->cle) {
 487         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
 488             if (s->cmd == NAND_CMD_READ0 && value == NAND_CMD_LPREAD2)
 489                 return;
 490             if (value == NAND_CMD_RANDOMREAD1) {
 491                 s->addr &= ~((1 << s->addr_shift) - 1);
 492                 s->addrlen = 0;
 493                 return;
 494             }
 495         }
 496         if (value == NAND_CMD_READ0) {
 497             s->offset = 0;
 498         } else if (value == NAND_CMD_READ1) {
 499             s->offset = 0x100;
 500             value = NAND_CMD_READ0;
 501         } else if (value == NAND_CMD_READ2) {
 502             s->offset = 1 << s->page_shift;
 503             value = NAND_CMD_READ0;
 504         }
 505
 506         s->cmd = value;
 507
 508         if (s->cmd == NAND_CMD_READSTATUS ||
 509                 s->cmd == NAND_CMD_PAGEPROGRAM2 ||
 510                 s->cmd == NAND_CMD_BLOCKERASE1 ||
 511                 s->cmd == NAND_CMD_BLOCKERASE2 ||
 512                 s->cmd == NAND_CMD_NOSERIALREAD2 ||
 513                 s->cmd == NAND_CMD_RANDOMREAD2 ||
 514                 s->cmd == NAND_CMD_RESET) {
 515             nand_command(s);
 516         }
 517
 518         if (s->cmd != NAND_CMD_RANDOMREAD2) {
 519             s->addrlen = 0;
 520         }
 521     }
 522
 523     if (s->ale) {
 524         unsigned int shift = s->addrlen * 8;
 525         uint64_t mask = ~(0xffull << shift);
 526         uint64_t v = (uint64_t)value << shift;
 527
 528         s->addr = (s->addr & mask) | v;
 529         s->addrlen ++;
 530
 531         switch (s->addrlen) {
 532         case 1:
 533             if (s->cmd == NAND_CMD_READID) {
 534                 nand_command(s);
 535             }
 536             break;
 537         case 2: /* fix cache address as a byte address */
 538             s->addr <<= (s->buswidth - 1);
 539             break;
 540         case 3:
 541             if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
 542                     (s->cmd == NAND_CMD_READ0 ||
 543                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
 544                 nand_command(s);
 545             }
 546             break;
 547         case 4:
 548             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
 549                     nand_flash_ids[s->chip_id].size < 256 && /* 1Gb or less */
 550                     (s->cmd == NAND_CMD_READ0 ||
 551                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
 552                 nand_command(s);
 553             }
 554             break;
 555         case 5:
 556             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
 557                     nand_flash_ids[s->chip_id].size >= 256 && /* 2Gb or more */
 558                     (s->cmd == NAND_CMD_READ0 ||
 559                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
 560                 nand_command(s);
 561             }
 562             break;
 563         default:
 564             break;
 565         }
 566     }
 567
 568     if (!s->cle && !s->ale && s->cmd == NAND_CMD_PAGEPROGRAM1) {
 569         if (s->iolen < (1 << s->page_shift) + (1 << s->oob_shift)) {
 570             for (i = s->buswidth; i--; value >>= 8) {
 571                 s->io[s->iolen ++] = (uint8_t) (value & 0xff);
 572             }
 573         }
 574     } else if (!s->cle && !s->ale && s->cmd == NAND_CMD_COPYBACKPRG1) {
 575         if ((s->addr & ((1 << s->addr_shift) - 1)) <
 576                 (1 << s->page_shift) + (1 << s->oob_shift)) {
 577             for (i = s->buswidth; i--; s->addr++, value >>= 8) {
 578                 s->io[s->iolen + (s->addr & ((1 << s->addr_shift) - 1))] =
 579                     (uint8_t) (value & 0xff);
 580             }
 581         }
 582     }
 583 }
 584
 585 uint32_t nand_getio(DeviceState *dev)
 586 {
 587     int offset;
 588     uint32_t x = 0;
 589     NANDFlashState *s = NAND(dev);
 590
 591     /* Allow sequential reading */
 592     if (!s->iolen && s->cmd == NAND_CMD_READ0) {
 593         offset = (int) (s->addr & ((1 << s->addr_shift) - 1)) + s->offset;
 594         s->offset = 0;
 595
 596         s->blk_load(s, s->addr, offset);
 597         if (s->gnd)
 598             s->iolen = (1 << s->page_shift) - offset;
 599         else
 600             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
 601     }
 602
 603     if (s->ce || s->iolen <= 0) {
 604         return 0;
 605     }
 606
 607     for (offset = s->buswidth; offset--;) {
 608         x |= s->ioaddr[offset] << (offset << 3);
 609     }
 610     /* after receiving READ STATUS command all subsequent reads will
 611      * return the status register value until another command is issued
 612      */
 613     if (s->cmd != NAND_CMD_READSTATUS) {
 614         s->addr   += s->buswidth;
 615         s->ioaddr += s->buswidth;
 616         s->iolen  -= s->buswidth;
 617     }
 618     return x;
 619 }
 620
 621 uint32_t nand_getbuswidth(DeviceState *dev)
 622 {
 623     NANDFlashState *s = (NANDFlashState *) dev;
 624     return s->buswidth << 3;
 625 }
 626
 627 DeviceState *nand_init(BlockBackend *blk, int manf_id, int chip_id)
 628 {
 629     DeviceState *dev;
 630
 631     if (nand_flash_ids[chip_id].size == 0) {
 632         hw_error("%s: Unsupported NAND chip ID.\n", __FUNCTION__);
 633     }
 634     dev = DEVICE(object_new(TYPE_NAND));
 635     qdev_prop_set_uint8(dev, "manufacturer_id", manf_id);
 636     qdev_prop_set_uint8(dev, "chip_id", chip_id);
 637     if (blk) {
 638         qdev_prop_set_drive_nofail(dev, "drive", blk);
 639     }
 640
 641     qdev_init_nofail(dev);
 642     return dev;
 643 }
 644
 645 type_init(nand_register_types)
 646
 647 #else
 648
 649 /* Program a single page */
 650 static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
 651 {
 652     uint64_t off, page, sector, soff;
 653     uint8_t iobuf[(PAGE_SECTORS + 2) * 0x200];
 654     if (PAGE(s->addr) >= s->pages)
 655         return;
 656
 657     if (!s->blk) {
 658         mem_and(s->storage + PAGE_START(s->addr) + (s->addr & PAGE_MASK) +
 659                         s->offset, s->io, s->iolen);
 660     } else if (s->mem_oob) {
 661         sector = SECTOR(s->addr);
 662         off = (s->addr & PAGE_MASK) + s->offset;
 663         soff = SECTOR_OFFSET(s->addr);
 664         if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
 665             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
 666             return;
 667         }
 668
 669         mem_and(iobuf + (soff | off), s->io, MIN(s->iolen, PAGE_SIZE - off));
 670         if (off + s->iolen > PAGE_SIZE) {
 671             page = PAGE(s->addr);
 672             mem_and(s->storage + (page << OOB_SHIFT), s->io + PAGE_SIZE - off,
 673                             MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
 674         }
 675
 676         if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
 677             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
 678         }
 679     } else {
 680         off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
 681         sector = off >> 9;
 682         soff = off & 0x1ff;
 683         if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
 684             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
 685             return;
 686         }
 687
 688         mem_and(iobuf + soff, s->io, s->iolen);
 689
 690         if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
 691             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
 692         }
 693     }
 694     s->offset = 0;
 695 }
 696
 697 /* Erase a single block */
 698 static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
 699 {
 700     uint64_t i, page, addr;
 701     uint8_t iobuf[0x200] = { [0 ... 0x1ff] = 0xff, };
 702     addr = s->addr & ~((1 << (ADDR_SHIFT + s->erase_shift)) - 1);
 703
 704     if (PAGE(addr) >= s->pages) {
 705         return;
 706     }
 707
 708     if (!s->blk) {
 709         memset(s->storage + PAGE_START(addr),
 710                         0xff, (PAGE_SIZE + OOB_SIZE) << s->erase_shift);
 711     } else if (s->mem_oob) {
 712         memset(s->storage + (PAGE(addr) << OOB_SHIFT),
 713                         0xff, OOB_SIZE << s->erase_shift);
 714         i = SECTOR(addr);
 715         page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
 716         for (; i < page; i ++)
 717             if (blk_write(s->blk, i, iobuf, 1) < 0) {
 718                 printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
 719             }
 720     } else {
 721         addr = PAGE_START(addr);
 722         page = addr >> 9;
 723         if (blk_read(s->blk, page, iobuf, 1) < 0) {
 724             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
 725         }
 726         memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
 727         if (blk_write(s->blk, page, iobuf, 1) < 0) {
 728             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
 729         }
 730
 731         memset(iobuf, 0xff, 0x200);
 732         i = (addr & ~0x1ff) + 0x200;
 733         for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
 734                         i < addr; i += 0x200) {
 735             if (blk_write(s->blk, i >> 9, iobuf, 1) < 0) {
 736                 printf("%s: write error in sector %" PRIu64 "\n",
 737                        __func__, i >> 9);
 738             }
 739         }
 740
 741         page = i >> 9;
 742         if (blk_read(s->blk, page, iobuf, 1) < 0) {
 743             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
 744         }
 745         memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
 746         if (blk_write(s->blk, page, iobuf, 1) < 0) {
 747             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
 748         }
 749     }
 750 }
 751
 752 static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
 753                 uint64_t addr, int offset)
 754 {
 755     if (PAGE(addr) >= s->pages) {
 756         return;
 757     }
 758
 759     if (s->blk) {
 760         if (s->mem_oob) {
 761             if (blk_read(s->blk, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
 762                 printf("%s: read error in sector %" PRIu64 "\n",
 763                                 __func__, SECTOR(addr));
 764             }
 765             memcpy(s->io + SECTOR_OFFSET(s->addr) + PAGE_SIZE,
 766                             s->storage + (PAGE(s->addr) << OOB_SHIFT),
 767                             OOB_SIZE);
 768             s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
 769         } else {
 770             if (blk_read(s->blk, PAGE_START(addr) >> 9,
 771                          s->io, (PAGE_SECTORS + 2)) < 0) {
 772                 printf("%s: read error in sector %" PRIu64 "\n",
 773                                 __func__, PAGE_START(addr) >> 9);
 774             }
 775             s->ioaddr = s->io + (PAGE_START(addr) & 0x1ff) + offset;
 776         }
 777     } else {
 778         memcpy(s->io, s->storage + PAGE_START(s->addr) +
 779                         offset, PAGE_SIZE + OOB_SIZE - offset);
 780         s->ioaddr = s->io;
 781     }
 782 }
 783
 784 static void glue(nand_init_, PAGE_SIZE)(NANDFlashState *s)
 785 {
 786     s->oob_shift = PAGE_SHIFT - 5;
 787     s->pages = s->size >> PAGE_SHIFT;
 788     s->addr_shift = ADDR_SHIFT;
 789
 790     s->blk_erase = glue(nand_blk_erase_, PAGE_SIZE);
 791     s->blk_write = glue(nand_blk_write_, PAGE_SIZE);
 792     s->blk_load = glue(nand_blk_load_, PAGE_SIZE);
 793 }
 794
 795 # undef PAGE_SIZE
 796 # undef PAGE_SHIFT
 797 # undef PAGE_SECTORS
 798 # undef ADDR_SHIFT
 799 #endif  /* NAND_IO */