hw/arm/strongarm.c

   1 /*
   2  * StrongARM SA-1100/SA-1110 emulation
   3  *
   4  * Copyright (C) 2011 Dmitry Eremin-Solenikov
   5  *
   6  * Largely based on StrongARM emulation:
   7  * Copyright (c) 2006 Openedhand Ltd.
   8  * Written by Andrzej Zaborowski <balrog@zabor.org>
   9  *
  10  * UART code based on QEMU 16550A UART emulation
  11  * Copyright (c) 2003-2004 Fabrice Bellard
  12  * Copyright (c) 2008 Citrix Systems, Inc.
  13  *
  14  *  This program is free software; you can redistribute it and/or modify
  15  *  it under the terms of the GNU General Public License version 2 as
  16  *  published by the Free Software Foundation.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License along
  24  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  25  *
  26  *  Contributions after 2012-01-13 are licensed under the terms of the
  27  *  GNU GPL, version 2 or (at your option) any later version.
  28  */
  29
  30 #include "hw/boards.h"
  31 #include "hw/sysbus.h"
  32 #include "strongarm.h"
  33 #include "qemu/error-report.h"
  34 #include "hw/arm/arm.h"
  35 #include "sysemu/char.h"
  36 #include "sysemu/sysemu.h"
  37 #include "hw/ssi.h"
  38
  39 //#define DEBUG
  40
  41 /*
  42  TODO
  43  - Implement cp15, c14 ?
  44  - Implement cp15, c15 !!! (idle used in L)
  45  - Implement idle mode handling/DIM
  46  - Implement sleep mode/Wake sources
  47  - Implement reset control
  48  - Implement memory control regs
  49  - PCMCIA handling
  50  - Maybe support MBGNT/MBREQ
  51  - DMA channels
  52  - GPCLK
  53  - IrDA
  54  - MCP
  55  - Enhance UART with modem signals
  56  */
  57
  58 #ifdef DEBUG
  59 # define DPRINTF(format, ...) printf(format , ## __VA_ARGS__)
  60 #else
  61 # define DPRINTF(format, ...) do { } while (0)
  62 #endif
  63
  64 static struct {
  65     hwaddr io_base;
  66     int irq;
  67 } sa_serial[] = {
  68     { 0x80010000, SA_PIC_UART1 },
  69     { 0x80030000, SA_PIC_UART2 },
  70     { 0x80050000, SA_PIC_UART3 },
  71     { 0, 0 }
  72 };
  73
  74 /* Interrupt Controller */
  75
  76 #define TYPE_STRONGARM_PIC "strongarm_pic"
  77 #define STRONGARM_PIC(obj) \
  78     OBJECT_CHECK(StrongARMPICState, (obj), TYPE_STRONGARM_PIC)
  79
  80 typedef struct StrongARMPICState {
  81     SysBusDevice parent_obj;
  82
  83     MemoryRegion iomem;
  84     qemu_irq    irq;
  85     qemu_irq    fiq;
  86
  87     uint32_t pending;
  88     uint32_t enabled;
  89     uint32_t is_fiq;
  90     uint32_t int_idle;
  91 } StrongARMPICState;
  92
  93 #define ICIP    0x00
  94 #define ICMR    0x04
  95 #define ICLR    0x08
  96 #define ICFP    0x10
  97 #define ICPR    0x20
  98 #define ICCR    0x0c
  99
 100 #define SA_PIC_SRCS     32
 101
 102
 103 static void strongarm_pic_update(void *opaque)
 104 {
 105     StrongARMPICState *s = opaque;
 106
 107     /* FIXME: reflect DIM */
 108     qemu_set_irq(s->fiq, s->pending & s->enabled &  s->is_fiq);
 109     qemu_set_irq(s->irq, s->pending & s->enabled & ~s->is_fiq);
 110 }
 111
 112 static void strongarm_pic_set_irq(void *opaque, int irq, int level)
 113 {
 114     StrongARMPICState *s = opaque;
 115
 116     if (level) {
 117         s->pending |= 1 << irq;
 118     } else {
 119         s->pending &= ~(1 << irq);
 120     }
 121
 122     strongarm_pic_update(s);
 123 }
 124
 125 static uint64_t strongarm_pic_mem_read(void *opaque, hwaddr offset,
 126                                        unsigned size)
 127 {
 128     StrongARMPICState *s = opaque;
 129
 130     switch (offset) {
 131     case ICIP:
 132         return s->pending & ~s->is_fiq & s->enabled;
 133     case ICMR:
 134         return s->enabled;
 135     case ICLR:
 136         return s->is_fiq;
 137     case ICCR:
 138         return s->int_idle == 0;
 139     case ICFP:
 140         return s->pending & s->is_fiq & s->enabled;
 141     case ICPR:
 142         return s->pending;
 143     default:
 144         printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n",
 145                         __func__, offset);
 146         return 0;
 147     }
 148 }
 149
 150 static void strongarm_pic_mem_write(void *opaque, hwaddr offset,
 151                                     uint64_t value, unsigned size)
 152 {
 153     StrongARMPICState *s = opaque;
 154
 155     switch (offset) {
 156     case ICMR:
 157         s->enabled = value;
 158         break;
 159     case ICLR:
 160         s->is_fiq = value;
 161         break;
 162     case ICCR:
 163         s->int_idle = (value & 1) ? 0 : ~0;
 164         break;
 165     default:
 166         printf("%s: Bad register offset 0x" TARGET_FMT_plx "\n",
 167                         __func__, offset);
 168         break;
 169     }
 170     strongarm_pic_update(s);
 171 }
 172
 173 static const MemoryRegionOps strongarm_pic_ops = {
 174     .read = strongarm_pic_mem_read,
 175     .write = strongarm_pic_mem_write,
 176     .endianness = DEVICE_NATIVE_ENDIAN,
 177 };
 178
 179 static int strongarm_pic_initfn(SysBusDevice *sbd)
 180 {
 181     DeviceState *dev = DEVICE(sbd);
 182     StrongARMPICState *s = STRONGARM_PIC(dev);
 183
 184     qdev_init_gpio_in(dev, strongarm_pic_set_irq, SA_PIC_SRCS);
 185     memory_region_init_io(&s->iomem, OBJECT(s), &strongarm_pic_ops, s,
 186                           "pic", 0x1000);
 187     sysbus_init_mmio(sbd, &s->iomem);
 188     sysbus_init_irq(sbd, &s->irq);
 189     sysbus_init_irq(sbd, &s->fiq);
 190
 191     return 0;
 192 }
 193
 194 static int strongarm_pic_post_load(void *opaque, int version_id)
 195 {
 196     strongarm_pic_update(opaque);
 197     return 0;
 198 }
 199
 200 static VMStateDescription vmstate_strongarm_pic_regs = {
 201     .name = "strongarm_pic",
 202     .version_id = 0,
 203     .minimum_version_id = 0,
 204     .post_load = strongarm_pic_post_load,
 205     .fields = (VMStateField[]) {
 206         VMSTATE_UINT32(pending, StrongARMPICState),
 207         VMSTATE_UINT32(enabled, StrongARMPICState),
 208         VMSTATE_UINT32(is_fiq, StrongARMPICState),
 209         VMSTATE_UINT32(int_idle, StrongARMPICState),
 210         VMSTATE_END_OF_LIST(),
 211     },
 212 };
 213
 214 static void strongarm_pic_class_init(ObjectClass *klass, void *data)
 215 {
 216     DeviceClass *dc = DEVICE_CLASS(klass);
 217     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 218
 219     k->init = strongarm_pic_initfn;
 220     dc->desc = "StrongARM PIC";
 221     dc->vmsd = &vmstate_strongarm_pic_regs;
 222 }
 223
 224 static const TypeInfo strongarm_pic_info = {
 225     .name          = TYPE_STRONGARM_PIC,
 226     .parent        = TYPE_SYS_BUS_DEVICE,
 227     .instance_size = sizeof(StrongARMPICState),
 228     .class_init    = strongarm_pic_class_init,
 229 };
 230
 231 /* Real-Time Clock */
 232 #define RTAR 0x00 /* RTC Alarm register */
 233 #define RCNR 0x04 /* RTC Counter register */
 234 #define RTTR 0x08 /* RTC Timer Trim register */
 235 #define RTSR 0x10 /* RTC Status register */
 236
 237 #define RTSR_AL (1 << 0) /* RTC Alarm detected */
 238 #define RTSR_HZ (1 << 1) /* RTC 1Hz detected */
 239 #define RTSR_ALE (1 << 2) /* RTC Alarm enable */
 240 #define RTSR_HZE (1 << 3) /* RTC 1Hz enable */
 241
 242 /* 16 LSB of RTTR are clockdiv for internal trim logic,
 243  * trim delete isn't emulated, so
 244  * f = 32 768 / (RTTR_trim + 1) */
 245
 246 #define TYPE_STRONGARM_RTC "strongarm-rtc"
 247 #define STRONGARM_RTC(obj) \
 248     OBJECT_CHECK(StrongARMRTCState, (obj), TYPE_STRONGARM_RTC)
 249
 250 typedef struct StrongARMRTCState {
 251     SysBusDevice parent_obj;
 252
 253     MemoryRegion iomem;
 254     uint32_t rttr;
 255     uint32_t rtsr;
 256     uint32_t rtar;
 257     uint32_t last_rcnr;
 258     int64_t last_hz;
 259     QEMUTimer *rtc_alarm;
 260     QEMUTimer *rtc_hz;
 261     qemu_irq rtc_irq;
 262     qemu_irq rtc_hz_irq;
 263 } StrongARMRTCState;
 264
 265 static inline void strongarm_rtc_int_update(StrongARMRTCState *s)
 266 {
 267     qemu_set_irq(s->rtc_irq, s->rtsr & RTSR_AL);
 268     qemu_set_irq(s->rtc_hz_irq, s->rtsr & RTSR_HZ);
 269 }
 270
 271 static void strongarm_rtc_hzupdate(StrongARMRTCState *s)
 272 {
 273     int64_t rt = qemu_clock_get_ms(rtc_clock);
 274     s->last_rcnr += ((rt - s->last_hz) << 15) /
 275             (1000 * ((s->rttr & 0xffff) + 1));
 276     s->last_hz = rt;
 277 }
 278
 279 static inline void strongarm_rtc_timer_update(StrongARMRTCState *s)
 280 {
 281     if ((s->rtsr & RTSR_HZE) && !(s->rtsr & RTSR_HZ)) {
 282         timer_mod(s->rtc_hz, s->last_hz + 1000);
 283     } else {
 284         timer_del(s->rtc_hz);
 285     }
 286
 287     if ((s->rtsr & RTSR_ALE) && !(s->rtsr & RTSR_AL)) {
 288         timer_mod(s->rtc_alarm, s->last_hz +
 289                 (((s->rtar - s->last_rcnr) * 1000 *
 290                   ((s->rttr & 0xffff) + 1)) >> 15));
 291     } else {
 292         timer_del(s->rtc_alarm);
 293     }
 294 }
 295
 296 static inline void strongarm_rtc_alarm_tick(void *opaque)
 297 {
 298     StrongARMRTCState *s = opaque;
 299     s->rtsr |= RTSR_AL;
 300     strongarm_rtc_timer_update(s);
 301     strongarm_rtc_int_update(s);
 302 }
 303
 304 static inline void strongarm_rtc_hz_tick(void *opaque)
 305 {
 306     StrongARMRTCState *s = opaque;
 307     s->rtsr |= RTSR_HZ;
 308     strongarm_rtc_timer_update(s);
 309     strongarm_rtc_int_update(s);
 310 }
 311
 312 static uint64_t strongarm_rtc_read(void *opaque, hwaddr addr,
 313                                    unsigned size)
 314 {
 315     StrongARMRTCState *s = opaque;
 316
 317     switch (addr) {
 318     case RTTR:
 319         return s->rttr;
 320     case RTSR:
 321         return s->rtsr;
 322     case RTAR:
 323         return s->rtar;
 324     case RCNR:
 325         return s->last_rcnr +
 326                 ((qemu_clock_get_ms(rtc_clock) - s->last_hz) << 15) /
 327                 (1000 * ((s->rttr & 0xffff) + 1));
 328     default:
 329         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
 330         return 0;
 331     }
 332 }
 333
 334 static void strongarm_rtc_write(void *opaque, hwaddr addr,
 335                                 uint64_t value, unsigned size)
 336 {
 337     StrongARMRTCState *s = opaque;
 338     uint32_t old_rtsr;
 339
 340     switch (addr) {
 341     case RTTR:
 342         strongarm_rtc_hzupdate(s);
 343         s->rttr = value;
 344         strongarm_rtc_timer_update(s);
 345         break;
 346
 347     case RTSR:
 348         old_rtsr = s->rtsr;
 349         s->rtsr = (value & (RTSR_ALE | RTSR_HZE)) |
 350                   (s->rtsr & ~(value & (RTSR_AL | RTSR_HZ)));
 351
 352         if (s->rtsr != old_rtsr) {
 353             strongarm_rtc_timer_update(s);
 354         }
 355
 356         strongarm_rtc_int_update(s);
 357         break;
 358
 359     case RTAR:
 360         s->rtar = value;
 361         strongarm_rtc_timer_update(s);
 362         break;
 363
 364     case RCNR:
 365         strongarm_rtc_hzupdate(s);
 366         s->last_rcnr = value;
 367         strongarm_rtc_timer_update(s);
 368         break;
 369
 370     default:
 371         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
 372     }
 373 }
 374
 375 static const MemoryRegionOps strongarm_rtc_ops = {
 376     .read = strongarm_rtc_read,
 377     .write = strongarm_rtc_write,
 378     .endianness = DEVICE_NATIVE_ENDIAN,
 379 };
 380
 381 static int strongarm_rtc_init(SysBusDevice *dev)
 382 {
 383     StrongARMRTCState *s = STRONGARM_RTC(dev);
 384     struct tm tm;
 385
 386     s->rttr = 0x0;
 387     s->rtsr = 0;
 388
 389     qemu_get_timedate(&tm, 0);
 390
 391     s->last_rcnr = (uint32_t) mktimegm(&tm);
 392     s->last_hz = qemu_clock_get_ms(rtc_clock);
 393
 394     s->rtc_alarm = timer_new_ms(rtc_clock, strongarm_rtc_alarm_tick, s);
 395     s->rtc_hz = timer_new_ms(rtc_clock, strongarm_rtc_hz_tick, s);
 396
 397     sysbus_init_irq(dev, &s->rtc_irq);
 398     sysbus_init_irq(dev, &s->rtc_hz_irq);
 399
 400     memory_region_init_io(&s->iomem, OBJECT(s), &strongarm_rtc_ops, s,
 401                           "rtc", 0x10000);
 402     sysbus_init_mmio(dev, &s->iomem);
 403
 404     return 0;
 405 }
 406
 407 static void strongarm_rtc_pre_save(void *opaque)
 408 {
 409     StrongARMRTCState *s = opaque;
 410
 411     strongarm_rtc_hzupdate(s);
 412 }
 413
 414 static int strongarm_rtc_post_load(void *opaque, int version_id)
 415 {
 416     StrongARMRTCState *s = opaque;
 417
 418     strongarm_rtc_timer_update(s);
 419     strongarm_rtc_int_update(s);
 420
 421     return 0;
 422 }
 423
 424 static const VMStateDescription vmstate_strongarm_rtc_regs = {
 425     .name = "strongarm-rtc",
 426     .version_id = 0,
 427     .minimum_version_id = 0,
 428     .pre_save = strongarm_rtc_pre_save,
 429     .post_load = strongarm_rtc_post_load,
 430     .fields = (VMStateField[]) {
 431         VMSTATE_UINT32(rttr, StrongARMRTCState),
 432         VMSTATE_UINT32(rtsr, StrongARMRTCState),
 433         VMSTATE_UINT32(rtar, StrongARMRTCState),
 434         VMSTATE_UINT32(last_rcnr, StrongARMRTCState),
 435         VMSTATE_INT64(last_hz, StrongARMRTCState),
 436         VMSTATE_END_OF_LIST(),
 437     },
 438 };
 439
 440 static void strongarm_rtc_sysbus_class_init(ObjectClass *klass, void *data)
 441 {
 442     DeviceClass *dc = DEVICE_CLASS(klass);
 443     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 444
 445     k->init = strongarm_rtc_init;
 446     dc->desc = "StrongARM RTC Controller";
 447     dc->vmsd = &vmstate_strongarm_rtc_regs;
 448 }
 449
 450 static const TypeInfo strongarm_rtc_sysbus_info = {
 451     .name          = TYPE_STRONGARM_RTC,
 452     .parent        = TYPE_SYS_BUS_DEVICE,
 453     .instance_size = sizeof(StrongARMRTCState),
 454     .class_init    = strongarm_rtc_sysbus_class_init,
 455 };
 456
 457 /* GPIO */
 458 #define GPLR 0x00
 459 #define GPDR 0x04
 460 #define GPSR 0x08
 461 #define GPCR 0x0c
 462 #define GRER 0x10
 463 #define GFER 0x14
 464 #define GEDR 0x18
 465 #define GAFR 0x1c
 466
 467 #define TYPE_STRONGARM_GPIO "strongarm-gpio"
 468 #define STRONGARM_GPIO(obj) \
 469     OBJECT_CHECK(StrongARMGPIOInfo, (obj), TYPE_STRONGARM_GPIO)
 470
 471 typedef struct StrongARMGPIOInfo StrongARMGPIOInfo;
 472 struct StrongARMGPIOInfo {
 473     SysBusDevice busdev;
 474     MemoryRegion iomem;
 475     qemu_irq handler[28];
 476     qemu_irq irqs[11];
 477     qemu_irq irqX;
 478
 479     uint32_t ilevel;
 480     uint32_t olevel;
 481     uint32_t dir;
 482     uint32_t rising;
 483     uint32_t falling;
 484     uint32_t status;
 485     uint32_t gafr;
 486
 487     uint32_t prev_level;
 488 };
 489
 490
 491 static void strongarm_gpio_irq_update(StrongARMGPIOInfo *s)
 492 {
 493     int i;
 494     for (i = 0; i < 11; i++) {
 495         qemu_set_irq(s->irqs[i], s->status & (1 << i));
 496     }
 497
 498     qemu_set_irq(s->irqX, (s->status & ~0x7ff));
 499 }
 500
 501 static void strongarm_gpio_set(void *opaque, int line, int level)
 502 {
 503     StrongARMGPIOInfo *s = opaque;
 504     uint32_t mask;
 505
 506     mask = 1 << line;
 507
 508     if (level) {
 509         s->status |= s->rising & mask &
 510                 ~s->ilevel & ~s->dir;
 511         s->ilevel |= mask;
 512     } else {
 513         s->status |= s->falling & mask &
 514                 s->ilevel & ~s->dir;
 515         s->ilevel &= ~mask;
 516     }
 517
 518     if (s->status & mask) {
 519         strongarm_gpio_irq_update(s);
 520     }
 521 }
 522
 523 static void strongarm_gpio_handler_update(StrongARMGPIOInfo *s)
 524 {
 525     uint32_t level, diff;
 526     int bit;
 527
 528     level = s->olevel & s->dir;
 529
 530     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 531         bit = ctz32(diff);
 532         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 533     }
 534
 535     s->prev_level = level;
 536 }
 537
 538 static uint64_t strongarm_gpio_read(void *opaque, hwaddr offset,
 539                                     unsigned size)
 540 {
 541     StrongARMGPIOInfo *s = opaque;
 542
 543     switch (offset) {
 544     case GPDR:        /* GPIO Pin-Direction registers */
 545         return s->dir;
 546
 547     case GPSR:        /* GPIO Pin-Output Set registers */
 548         qemu_log_mask(LOG_GUEST_ERROR,
 549                       "strongarm GPIO: read from write only register GPSR\n");
 550         return 0;
 551
 552     case GPCR:        /* GPIO Pin-Output Clear registers */
 553         qemu_log_mask(LOG_GUEST_ERROR,
 554                       "strongarm GPIO: read from write only register GPCR\n");
 555         return 0;
 556
 557     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 558         return s->rising;
 559
 560     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 561         return s->falling;
 562
 563     case GAFR:        /* GPIO Alternate Function registers */
 564         return s->gafr;
 565
 566     case GPLR:        /* GPIO Pin-Level registers */
 567         return (s->olevel & s->dir) |
 568                (s->ilevel & ~s->dir);
 569
 570     case GEDR:        /* GPIO Edge Detect Status registers */
 571         return s->status;
 572
 573     default:
 574         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 575     }
 576
 577     return 0;
 578 }
 579
 580 static void strongarm_gpio_write(void *opaque, hwaddr offset,
 581                                  uint64_t value, unsigned size)
 582 {
 583     StrongARMGPIOInfo *s = opaque;
 584
 585     switch (offset) {
 586     case GPDR:        /* GPIO Pin-Direction registers */
 587         s->dir = value;
 588         strongarm_gpio_handler_update(s);
 589         break;
 590
 591     case GPSR:        /* GPIO Pin-Output Set registers */
 592         s->olevel |= value;
 593         strongarm_gpio_handler_update(s);
 594         break;
 595
 596     case GPCR:        /* GPIO Pin-Output Clear registers */
 597         s->olevel &= ~value;
 598         strongarm_gpio_handler_update(s);
 599         break;
 600
 601     case GRER:        /* GPIO Rising-Edge Detect Enable registers */
 602         s->rising = value;
 603         break;
 604
 605     case GFER:        /* GPIO Falling-Edge Detect Enable registers */
 606         s->falling = value;
 607         break;
 608
 609     case GAFR:        /* GPIO Alternate Function registers */
 610         s->gafr = value;
 611         break;
 612
 613     case GEDR:        /* GPIO Edge Detect Status registers */
 614         s->status &= ~value;
 615         strongarm_gpio_irq_update(s);
 616         break;
 617
 618     default:
 619         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 620     }
 621 }
 622
 623 static const MemoryRegionOps strongarm_gpio_ops = {
 624     .read = strongarm_gpio_read,
 625     .write = strongarm_gpio_write,
 626     .endianness = DEVICE_NATIVE_ENDIAN,
 627 };
 628
 629 static DeviceState *strongarm_gpio_init(hwaddr base,
 630                 DeviceState *pic)
 631 {
 632     DeviceState *dev;
 633     int i;
 634
 635     dev = qdev_create(NULL, TYPE_STRONGARM_GPIO);
 636     qdev_init_nofail(dev);
 637
 638     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
 639     for (i = 0; i < 12; i++)
 640         sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
 641                     qdev_get_gpio_in(pic, SA_PIC_GPIO0_EDGE + i));
 642
 643     return dev;
 644 }
 645
 646 static int strongarm_gpio_initfn(SysBusDevice *sbd)
 647 {
 648     DeviceState *dev = DEVICE(sbd);
 649     StrongARMGPIOInfo *s = STRONGARM_GPIO(dev);
 650     int i;
 651
 652     qdev_init_gpio_in(dev, strongarm_gpio_set, 28);
 653     qdev_init_gpio_out(dev, s->handler, 28);
 654
 655     memory_region_init_io(&s->iomem, OBJECT(s), &strongarm_gpio_ops, s,
 656                           "gpio", 0x1000);
 657
 658     sysbus_init_mmio(sbd, &s->iomem);
 659     for (i = 0; i < 11; i++) {
 660         sysbus_init_irq(sbd, &s->irqs[i]);
 661     }
 662     sysbus_init_irq(sbd, &s->irqX);
 663
 664     return 0;
 665 }
 666
 667 static const VMStateDescription vmstate_strongarm_gpio_regs = {
 668     .name = "strongarm-gpio",
 669     .version_id = 0,
 670     .minimum_version_id = 0,
 671     .fields = (VMStateField[]) {
 672         VMSTATE_UINT32(ilevel, StrongARMGPIOInfo),
 673         VMSTATE_UINT32(olevel, StrongARMGPIOInfo),
 674         VMSTATE_UINT32(dir, StrongARMGPIOInfo),
 675         VMSTATE_UINT32(rising, StrongARMGPIOInfo),
 676         VMSTATE_UINT32(falling, StrongARMGPIOInfo),
 677         VMSTATE_UINT32(status, StrongARMGPIOInfo),
 678         VMSTATE_UINT32(gafr, StrongARMGPIOInfo),
 679         VMSTATE_UINT32(prev_level, StrongARMGPIOInfo),
 680         VMSTATE_END_OF_LIST(),
 681     },
 682 };
 683
 684 static void strongarm_gpio_class_init(ObjectClass *klass, void *data)
 685 {
 686     DeviceClass *dc = DEVICE_CLASS(klass);
 687     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 688
 689     k->init = strongarm_gpio_initfn;
 690     dc->desc = "StrongARM GPIO controller";
 691     dc->vmsd = &vmstate_strongarm_gpio_regs;
 692 }
 693
 694 static const TypeInfo strongarm_gpio_info = {
 695     .name          = TYPE_STRONGARM_GPIO,
 696     .parent        = TYPE_SYS_BUS_DEVICE,
 697     .instance_size = sizeof(StrongARMGPIOInfo),
 698     .class_init    = strongarm_gpio_class_init,
 699 };
 700
 701 /* Peripheral Pin Controller */
 702 #define PPDR 0x00
 703 #define PPSR 0x04
 704 #define PPAR 0x08
 705 #define PSDR 0x0c
 706 #define PPFR 0x10
 707
 708 #define TYPE_STRONGARM_PPC "strongarm-ppc"
 709 #define STRONGARM_PPC(obj) \
 710     OBJECT_CHECK(StrongARMPPCInfo, (obj), TYPE_STRONGARM_PPC)
 711
 712 typedef struct StrongARMPPCInfo StrongARMPPCInfo;
 713 struct StrongARMPPCInfo {
 714     SysBusDevice parent_obj;
 715
 716     MemoryRegion iomem;
 717     qemu_irq handler[28];
 718
 719     uint32_t ilevel;
 720     uint32_t olevel;
 721     uint32_t dir;
 722     uint32_t ppar;
 723     uint32_t psdr;
 724     uint32_t ppfr;
 725
 726     uint32_t prev_level;
 727 };
 728
 729 static void strongarm_ppc_set(void *opaque, int line, int level)
 730 {
 731     StrongARMPPCInfo *s = opaque;
 732
 733     if (level) {
 734         s->ilevel |= 1 << line;
 735     } else {
 736         s->ilevel &= ~(1 << line);
 737     }
 738 }
 739
 740 static void strongarm_ppc_handler_update(StrongARMPPCInfo *s)
 741 {
 742     uint32_t level, diff;
 743     int bit;
 744
 745     level = s->olevel & s->dir;
 746
 747     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
 748         bit = ctz32(diff);
 749         qemu_set_irq(s->handler[bit], (level >> bit) & 1);
 750     }
 751
 752     s->prev_level = level;
 753 }
 754
 755 static uint64_t strongarm_ppc_read(void *opaque, hwaddr offset,
 756                                    unsigned size)
 757 {
 758     StrongARMPPCInfo *s = opaque;
 759
 760     switch (offset) {
 761     case PPDR:        /* PPC Pin Direction registers */
 762         return s->dir | ~0x3fffff;
 763
 764     case PPSR:        /* PPC Pin State registers */
 765         return (s->olevel & s->dir) |
 766                (s->ilevel & ~s->dir) |
 767                ~0x3fffff;
 768
 769     case PPAR:
 770         return s->ppar | ~0x41000;
 771
 772     case PSDR:
 773         return s->psdr;
 774
 775     case PPFR:
 776         return s->ppfr | ~0x7f001;
 777
 778     default:
 779         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 780     }
 781
 782     return 0;
 783 }
 784
 785 static void strongarm_ppc_write(void *opaque, hwaddr offset,
 786                                 uint64_t value, unsigned size)
 787 {
 788     StrongARMPPCInfo *s = opaque;
 789
 790     switch (offset) {
 791     case PPDR:        /* PPC Pin Direction registers */
 792         s->dir = value & 0x3fffff;
 793         strongarm_ppc_handler_update(s);
 794         break;
 795
 796     case PPSR:        /* PPC Pin State registers */
 797         s->olevel = value & s->dir & 0x3fffff;
 798         strongarm_ppc_handler_update(s);
 799         break;
 800
 801     case PPAR:
 802         s->ppar = value & 0x41000;
 803         break;
 804
 805     case PSDR:
 806         s->psdr = value & 0x3fffff;
 807         break;
 808
 809     case PPFR:
 810         s->ppfr = value & 0x7f001;
 811         break;
 812
 813     default:
 814         printf("%s: Bad offset 0x" TARGET_FMT_plx "\n", __func__, offset);
 815     }
 816 }
 817
 818 static const MemoryRegionOps strongarm_ppc_ops = {
 819     .read = strongarm_ppc_read,
 820     .write = strongarm_ppc_write,
 821     .endianness = DEVICE_NATIVE_ENDIAN,
 822 };
 823
 824 static int strongarm_ppc_init(SysBusDevice *sbd)
 825 {
 826     DeviceState *dev = DEVICE(sbd);
 827     StrongARMPPCInfo *s = STRONGARM_PPC(dev);
 828
 829     qdev_init_gpio_in(dev, strongarm_ppc_set, 22);
 830     qdev_init_gpio_out(dev, s->handler, 22);
 831
 832     memory_region_init_io(&s->iomem, OBJECT(s), &strongarm_ppc_ops, s,
 833                           "ppc", 0x1000);
 834
 835     sysbus_init_mmio(sbd, &s->iomem);
 836
 837     return 0;
 838 }
 839
 840 static const VMStateDescription vmstate_strongarm_ppc_regs = {
 841     .name = "strongarm-ppc",
 842     .version_id = 0,
 843     .minimum_version_id = 0,
 844     .fields = (VMStateField[]) {
 845         VMSTATE_UINT32(ilevel, StrongARMPPCInfo),
 846         VMSTATE_UINT32(olevel, StrongARMPPCInfo),
 847         VMSTATE_UINT32(dir, StrongARMPPCInfo),
 848         VMSTATE_UINT32(ppar, StrongARMPPCInfo),
 849         VMSTATE_UINT32(psdr, StrongARMPPCInfo),
 850         VMSTATE_UINT32(ppfr, StrongARMPPCInfo),
 851         VMSTATE_UINT32(prev_level, StrongARMPPCInfo),
 852         VMSTATE_END_OF_LIST(),
 853     },
 854 };
 855
 856 static void strongarm_ppc_class_init(ObjectClass *klass, void *data)
 857 {
 858     DeviceClass *dc = DEVICE_CLASS(klass);
 859     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 860
 861     k->init = strongarm_ppc_init;
 862     dc->desc = "StrongARM PPC controller";
 863     dc->vmsd = &vmstate_strongarm_ppc_regs;
 864 }
 865
 866 static const TypeInfo strongarm_ppc_info = {
 867     .name          = TYPE_STRONGARM_PPC,
 868     .parent        = TYPE_SYS_BUS_DEVICE,
 869     .instance_size = sizeof(StrongARMPPCInfo),
 870     .class_init    = strongarm_ppc_class_init,
 871 };
 872
 873 /* UART Ports */
 874 #define UTCR0 0x00
 875 #define UTCR1 0x04
 876 #define UTCR2 0x08
 877 #define UTCR3 0x0c
 878 #define UTDR  0x14
 879 #define UTSR0 0x1c
 880 #define UTSR1 0x20
 881
 882 #define UTCR0_PE  (1 << 0) /* Parity enable */
 883 #define UTCR0_OES (1 << 1) /* Even parity */
 884 #define UTCR0_SBS (1 << 2) /* 2 stop bits */
 885 #define UTCR0_DSS (1 << 3) /* 8-bit data */
 886
 887 #define UTCR3_RXE (1 << 0) /* Rx enable */
 888 #define UTCR3_TXE (1 << 1) /* Tx enable */
 889 #define UTCR3_BRK (1 << 2) /* Force Break */
 890 #define UTCR3_RIE (1 << 3) /* Rx int enable */
 891 #define UTCR3_TIE (1 << 4) /* Tx int enable */
 892 #define UTCR3_LBM (1 << 5) /* Loopback */
 893
 894 #define UTSR0_TFS (1 << 0) /* Tx FIFO nearly empty */
 895 #define UTSR0_RFS (1 << 1) /* Rx FIFO nearly full */
 896 #define UTSR0_RID (1 << 2) /* Receiver Idle */
 897 #define UTSR0_RBB (1 << 3) /* Receiver begin break */
 898 #define UTSR0_REB (1 << 4) /* Receiver end break */
 899 #define UTSR0_EIF (1 << 5) /* Error in FIFO */
 900
 901 #define UTSR1_RNE (1 << 1) /* Receive FIFO not empty */
 902 #define UTSR1_TNF (1 << 2) /* Transmit FIFO not full */
 903 #define UTSR1_PRE (1 << 3) /* Parity error */
 904 #define UTSR1_FRE (1 << 4) /* Frame error */
 905 #define UTSR1_ROR (1 << 5) /* Receive Over Run */
 906
 907 #define RX_FIFO_PRE (1 << 8)
 908 #define RX_FIFO_FRE (1 << 9)
 909 #define RX_FIFO_ROR (1 << 10)
 910
 911 #define TYPE_STRONGARM_UART "strongarm-uart"
 912 #define STRONGARM_UART(obj) \
 913     OBJECT_CHECK(StrongARMUARTState, (obj), TYPE_STRONGARM_UART)
 914
 915 typedef struct StrongARMUARTState {
 916     SysBusDevice parent_obj;
 917
 918     MemoryRegion iomem;
 919     CharDriverState *chr;
 920     qemu_irq irq;
 921
 922     uint8_t utcr0;
 923     uint16_t brd;
 924     uint8_t utcr3;
 925     uint8_t utsr0;
 926     uint8_t utsr1;
 927
 928     uint8_t tx_fifo[8];
 929     uint8_t tx_start;
 930     uint8_t tx_len;
 931     uint16_t rx_fifo[12]; /* value + error flags in high bits */
 932     uint8_t rx_start;
 933     uint8_t rx_len;
 934
 935     uint64_t char_transmit_time; /* time to transmit a char in ticks*/
 936     bool wait_break_end;
 937     QEMUTimer *rx_timeout_timer;
 938     QEMUTimer *tx_timer;
 939 } StrongARMUARTState;
 940
 941 static void strongarm_uart_update_status(StrongARMUARTState *s)
 942 {
 943     uint16_t utsr1 = 0;
 944
 945     if (s->tx_len != 8) {
 946         utsr1 |= UTSR1_TNF;
 947     }
 948
 949     if (s->rx_len != 0) {
 950         uint16_t ent = s->rx_fifo[s->rx_start];
 951
 952         utsr1 |= UTSR1_RNE;
 953         if (ent & RX_FIFO_PRE) {
 954             s->utsr1 |= UTSR1_PRE;
 955         }
 956         if (ent & RX_FIFO_FRE) {
 957             s->utsr1 |= UTSR1_FRE;
 958         }
 959         if (ent & RX_FIFO_ROR) {
 960             s->utsr1 |= UTSR1_ROR;
 961         }
 962     }
 963
 964     s->utsr1 = utsr1;
 965 }
 966
 967 static void strongarm_uart_update_int_status(StrongARMUARTState *s)
 968 {
 969     uint16_t utsr0 = s->utsr0 &
 970             (UTSR0_REB | UTSR0_RBB | UTSR0_RID);
 971     int i;
 972
 973     if ((s->utcr3 & UTCR3_TXE) &&
 974                 (s->utcr3 & UTCR3_TIE) &&
 975                 s->tx_len <= 4) {
 976         utsr0 |= UTSR0_TFS;
 977     }
 978
 979     if ((s->utcr3 & UTCR3_RXE) &&
 980                 (s->utcr3 & UTCR3_RIE) &&
 981                 s->rx_len > 4) {
 982         utsr0 |= UTSR0_RFS;
 983     }
 984
 985     for (i = 0; i < s->rx_len && i < 4; i++)
 986         if (s->rx_fifo[(s->rx_start + i) % 12] & ~0xff) {
 987             utsr0 |= UTSR0_EIF;
 988             break;
 989         }
 990
 991     s->utsr0 = utsr0;
 992     qemu_set_irq(s->irq, utsr0);
 993 }
 994
 995 static void strongarm_uart_update_parameters(StrongARMUARTState *s)
 996 {
 997     int speed, parity, data_bits, stop_bits, frame_size;
 998     QEMUSerialSetParams ssp;
 999
1000     /* Start bit. */
1001     frame_size = 1;
1002     if (s->utcr0 & UTCR0_PE) {
1003         /* Parity bit. */
1004         frame_size++;
1005         if (s->utcr0 & UTCR0_OES) {
1006             parity = 'E';
1007         } else {
1008             parity = 'O';
1009         }
1010     } else {
1011             parity = 'N';
1012     }
1013     if (s->utcr0 & UTCR0_SBS) {
1014         stop_bits = 2;
1015     } else {
1016         stop_bits = 1;
1017     }
1018
1019     data_bits = (s->utcr0 & UTCR0_DSS) ? 8 : 7;
1020     frame_size += data_bits + stop_bits;
1021     speed = 3686400 / 16 / (s->brd + 1);
1022     ssp.speed = speed;
1023     ssp.parity = parity;
1024     ssp.data_bits = data_bits;
1025     ssp.stop_bits = stop_bits;
1026     s->char_transmit_time =  (get_ticks_per_sec() / speed) * frame_size;
1027     if (s->chr) {
1028         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
1029     }
1030
1031     DPRINTF(stderr, "%s speed=%d parity=%c data=%d stop=%d\n", s->chr->label,
1032             speed, parity, data_bits, stop_bits);
1033 }
1034
1035 static void strongarm_uart_rx_to(void *opaque)
1036 {
1037     StrongARMUARTState *s = opaque;
1038
1039     if (s->rx_len) {
1040         s->utsr0 |= UTSR0_RID;
1041         strongarm_uart_update_int_status(s);
1042     }
1043 }
1044
1045 static void strongarm_uart_rx_push(StrongARMUARTState *s, uint16_t c)
1046 {
1047     if ((s->utcr3 & UTCR3_RXE) == 0) {
1048         /* rx disabled */
1049         return;
1050     }
1051
1052     if (s->wait_break_end) {
1053         s->utsr0 |= UTSR0_REB;
1054         s->wait_break_end = false;
1055     }
1056
1057     if (s->rx_len < 12) {
1058         s->rx_fifo[(s->rx_start + s->rx_len) % 12] = c;
1059         s->rx_len++;
1060     } else
1061         s->rx_fifo[(s->rx_start + 11) % 12] |= RX_FIFO_ROR;
1062 }
1063
1064 static int strongarm_uart_can_receive(void *opaque)
1065 {
1066     StrongARMUARTState *s = opaque;
1067
1068     if (s->rx_len == 12) {
1069         return 0;
1070     }
1071     /* It's best not to get more than 2/3 of RX FIFO, so advertise that much */
1072     if (s->rx_len < 8) {
1073         return 8 - s->rx_len;
1074     }
1075     return 1;
1076 }
1077
1078 static void strongarm_uart_receive(void *opaque, const uint8_t *buf, int size)
1079 {
1080     StrongARMUARTState *s = opaque;
1081     int i;
1082
1083     for (i = 0; i < size; i++) {
1084         strongarm_uart_rx_push(s, buf[i]);
1085     }
1086
1087     /* call the timeout receive callback in 3 char transmit time */
1088     timer_mod(s->rx_timeout_timer,
1089                     qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1090
1091     strongarm_uart_update_status(s);
1092     strongarm_uart_update_int_status(s);
1093 }
1094
1095 static void strongarm_uart_event(void *opaque, int event)
1096 {
1097     StrongARMUARTState *s = opaque;
1098     if (event == CHR_EVENT_BREAK) {
1099         s->utsr0 |= UTSR0_RBB;
1100         strongarm_uart_rx_push(s, RX_FIFO_FRE);
1101         s->wait_break_end = true;
1102         strongarm_uart_update_status(s);
1103         strongarm_uart_update_int_status(s);
1104     }
1105 }
1106
1107 static void strongarm_uart_tx(void *opaque)
1108 {
1109     StrongARMUARTState *s = opaque;
1110     uint64_t new_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1111
1112     if (s->utcr3 & UTCR3_LBM) /* loopback */ {
1113         strongarm_uart_receive(s, &s->tx_fifo[s->tx_start], 1);
1114     } else if (s->chr) {
1115         qemu_chr_fe_write(s->chr, &s->tx_fifo[s->tx_start], 1);
1116     }
1117
1118     s->tx_start = (s->tx_start + 1) % 8;
1119     s->tx_len--;
1120     if (s->tx_len) {
1121         timer_mod(s->tx_timer, new_xmit_ts + s->char_transmit_time);
1122     }
1123     strongarm_uart_update_status(s);
1124     strongarm_uart_update_int_status(s);
1125 }
1126
1127 static uint64_t strongarm_uart_read(void *opaque, hwaddr addr,
1128                                     unsigned size)
1129 {
1130     StrongARMUARTState *s = opaque;
1131     uint16_t ret;
1132
1133     switch (addr) {
1134     case UTCR0:
1135         return s->utcr0;
1136
1137     case UTCR1:
1138         return s->brd >> 8;
1139
1140     case UTCR2:
1141         return s->brd & 0xff;
1142
1143     case UTCR3:
1144         return s->utcr3;
1145
1146     case UTDR:
1147         if (s->rx_len != 0) {
1148             ret = s->rx_fifo[s->rx_start];
1149             s->rx_start = (s->rx_start + 1) % 12;
1150             s->rx_len--;
1151             strongarm_uart_update_status(s);
1152             strongarm_uart_update_int_status(s);
1153             return ret;
1154         }
1155         return 0;
1156
1157     case UTSR0:
1158         return s->utsr0;
1159
1160     case UTSR1:
1161         return s->utsr1;
1162
1163     default:
1164         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1165         return 0;
1166     }
1167 }
1168
1169 static void strongarm_uart_write(void *opaque, hwaddr addr,
1170                                  uint64_t value, unsigned size)
1171 {
1172     StrongARMUARTState *s = opaque;
1173
1174     switch (addr) {
1175     case UTCR0:
1176         s->utcr0 = value & 0x7f;
1177         strongarm_uart_update_parameters(s);
1178         break;
1179
1180     case UTCR1:
1181         s->brd = (s->brd & 0xff) | ((value & 0xf) << 8);
1182         strongarm_uart_update_parameters(s);
1183         break;
1184
1185     case UTCR2:
1186         s->brd = (s->brd & 0xf00) | (value & 0xff);
1187         strongarm_uart_update_parameters(s);
1188         break;
1189
1190     case UTCR3:
1191         s->utcr3 = value & 0x3f;
1192         if ((s->utcr3 & UTCR3_RXE) == 0) {
1193             s->rx_len = 0;
1194         }
1195         if ((s->utcr3 & UTCR3_TXE) == 0) {
1196             s->tx_len = 0;
1197         }
1198         strongarm_uart_update_status(s);
1199         strongarm_uart_update_int_status(s);
1200         break;
1201
1202     case UTDR:
1203         if ((s->utcr3 & UTCR3_TXE) && s->tx_len != 8) {
1204             s->tx_fifo[(s->tx_start + s->tx_len) % 8] = value;
1205             s->tx_len++;
1206             strongarm_uart_update_status(s);
1207             strongarm_uart_update_int_status(s);
1208             if (s->tx_len == 1) {
1209                 strongarm_uart_tx(s);
1210             }
1211         }
1212         break;
1213
1214     case UTSR0:
1215         s->utsr0 = s->utsr0 & ~(value &
1216                 (UTSR0_REB | UTSR0_RBB | UTSR0_RID));
1217         strongarm_uart_update_int_status(s);
1218         break;
1219
1220     default:
1221         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1222     }
1223 }
1224
1225 static const MemoryRegionOps strongarm_uart_ops = {
1226     .read = strongarm_uart_read,
1227     .write = strongarm_uart_write,
1228     .endianness = DEVICE_NATIVE_ENDIAN,
1229 };
1230
1231 static int strongarm_uart_init(SysBusDevice *dev)
1232 {
1233     StrongARMUARTState *s = STRONGARM_UART(dev);
1234
1235     memory_region_init_io(&s->iomem, OBJECT(s), &strongarm_uart_ops, s,
1236                           "uart", 0x10000);
1237     sysbus_init_mmio(dev, &s->iomem);
1238     sysbus_init_irq(dev, &s->irq);
1239
1240     s->rx_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_rx_to, s);
1241     s->tx_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, strongarm_uart_tx, s);
1242
1243     if (s->chr) {
1244         qemu_chr_add_handlers(s->chr,
1245                         strongarm_uart_can_receive,
1246                         strongarm_uart_receive,
1247                         strongarm_uart_event,
1248                         s);
1249     }
1250
1251     return 0;
1252 }
1253
1254 static void strongarm_uart_reset(DeviceState *dev)
1255 {
1256     StrongARMUARTState *s = STRONGARM_UART(dev);
1257
1258     s->utcr0 = UTCR0_DSS; /* 8 data, no parity */
1259     s->brd = 23;    /* 9600 */
1260     /* enable send & recv - this actually violates spec */
1261     s->utcr3 = UTCR3_TXE | UTCR3_RXE;
1262
1263     s->rx_len = s->tx_len = 0;
1264
1265     strongarm_uart_update_parameters(s);
1266     strongarm_uart_update_status(s);
1267     strongarm_uart_update_int_status(s);
1268 }
1269
1270 static int strongarm_uart_post_load(void *opaque, int version_id)
1271 {
1272     StrongARMUARTState *s = opaque;
1273
1274     strongarm_uart_update_parameters(s);
1275     strongarm_uart_update_status(s);
1276     strongarm_uart_update_int_status(s);
1277
1278     /* tx and restart timer */
1279     if (s->tx_len) {
1280         strongarm_uart_tx(s);
1281     }
1282
1283     /* restart rx timeout timer */
1284     if (s->rx_len) {
1285         timer_mod(s->rx_timeout_timer,
1286                 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 3);
1287     }
1288
1289     return 0;
1290 }
1291
1292 static const VMStateDescription vmstate_strongarm_uart_regs = {
1293     .name = "strongarm-uart",
1294     .version_id = 0,
1295     .minimum_version_id = 0,
1296     .post_load = strongarm_uart_post_load,
1297     .fields = (VMStateField[]) {
1298         VMSTATE_UINT8(utcr0, StrongARMUARTState),
1299         VMSTATE_UINT16(brd, StrongARMUARTState),
1300         VMSTATE_UINT8(utcr3, StrongARMUARTState),
1301         VMSTATE_UINT8(utsr0, StrongARMUARTState),
1302         VMSTATE_UINT8_ARRAY(tx_fifo, StrongARMUARTState, 8),
1303         VMSTATE_UINT8(tx_start, StrongARMUARTState),
1304         VMSTATE_UINT8(tx_len, StrongARMUARTState),
1305         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMUARTState, 12),
1306         VMSTATE_UINT8(rx_start, StrongARMUARTState),
1307         VMSTATE_UINT8(rx_len, StrongARMUARTState),
1308         VMSTATE_BOOL(wait_break_end, StrongARMUARTState),
1309         VMSTATE_END_OF_LIST(),
1310     },
1311 };
1312
1313 static Property strongarm_uart_properties[] = {
1314     DEFINE_PROP_CHR("chardev", StrongARMUARTState, chr),
1315     DEFINE_PROP_END_OF_LIST(),
1316 };
1317
1318 static void strongarm_uart_class_init(ObjectClass *klass, void *data)
1319 {
1320     DeviceClass *dc = DEVICE_CLASS(klass);
1321     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
1322
1323     k->init = strongarm_uart_init;
1324     dc->desc = "StrongARM UART controller";
1325     dc->reset = strongarm_uart_reset;
1326     dc->vmsd = &vmstate_strongarm_uart_regs;
1327     dc->props = strongarm_uart_properties;
1328 }
1329
1330 static const TypeInfo strongarm_uart_info = {
1331     .name          = TYPE_STRONGARM_UART,
1332     .parent        = TYPE_SYS_BUS_DEVICE,
1333     .instance_size = sizeof(StrongARMUARTState),
1334     .class_init    = strongarm_uart_class_init,
1335 };
1336
1337 /* Synchronous Serial Ports */
1338
1339 #define TYPE_STRONGARM_SSP "strongarm-ssp"
1340 #define STRONGARM_SSP(obj) \
1341     OBJECT_CHECK(StrongARMSSPState, (obj), TYPE_STRONGARM_SSP)
1342
1343 typedef struct StrongARMSSPState {
1344     SysBusDevice parent_obj;
1345
1346     MemoryRegion iomem;
1347     qemu_irq irq;
1348     SSIBus *bus;
1349
1350     uint16_t sscr[2];
1351     uint16_t sssr;
1352
1353     uint16_t rx_fifo[8];
1354     uint8_t rx_level;
1355     uint8_t rx_start;
1356 } StrongARMSSPState;
1357
1358 #define SSCR0 0x60 /* SSP Control register 0 */
1359 #define SSCR1 0x64 /* SSP Control register 1 */
1360 #define SSDR  0x6c /* SSP Data register */
1361 #define SSSR  0x74 /* SSP Status register */
1362
1363 /* Bitfields for above registers */
1364 #define SSCR0_SPI(x)    (((x) & 0x30) == 0x00)
1365 #define SSCR0_SSP(x)    (((x) & 0x30) == 0x10)
1366 #define SSCR0_UWIRE(x)  (((x) & 0x30) == 0x20)
1367 #define SSCR0_PSP(x)    (((x) & 0x30) == 0x30)
1368 #define SSCR0_SSE       (1 << 7)
1369 #define SSCR0_DSS(x)    (((x) & 0xf) + 1)
1370 #define SSCR1_RIE       (1 << 0)
1371 #define SSCR1_TIE       (1 << 1)
1372 #define SSCR1_LBM       (1 << 2)
1373 #define SSSR_TNF        (1 << 2)
1374 #define SSSR_RNE        (1 << 3)
1375 #define SSSR_TFS        (1 << 5)
1376 #define SSSR_RFS        (1 << 6)
1377 #define SSSR_ROR        (1 << 7)
1378 #define SSSR_RW         0x0080
1379
1380 static void strongarm_ssp_int_update(StrongARMSSPState *s)
1381 {
1382     int level = 0;
1383
1384     level |= (s->sssr & SSSR_ROR);
1385     level |= (s->sssr & SSSR_RFS)  &&  (s->sscr[1] & SSCR1_RIE);
1386     level |= (s->sssr & SSSR_TFS)  &&  (s->sscr[1] & SSCR1_TIE);
1387     qemu_set_irq(s->irq, level);
1388 }
1389
1390 static void strongarm_ssp_fifo_update(StrongARMSSPState *s)
1391 {
1392     s->sssr &= ~SSSR_TFS;
1393     s->sssr &= ~SSSR_TNF;
1394     if (s->sscr[0] & SSCR0_SSE) {
1395         if (s->rx_level >= 4) {
1396             s->sssr |= SSSR_RFS;
1397         } else {
1398             s->sssr &= ~SSSR_RFS;
1399         }
1400         if (s->rx_level) {
1401             s->sssr |= SSSR_RNE;
1402         } else {
1403             s->sssr &= ~SSSR_RNE;
1404         }
1405         /* TX FIFO is never filled, so it is always in underrun
1406            condition if SSP is enabled */
1407         s->sssr |= SSSR_TFS;
1408         s->sssr |= SSSR_TNF;
1409     }
1410
1411     strongarm_ssp_int_update(s);
1412 }
1413
1414 static uint64_t strongarm_ssp_read(void *opaque, hwaddr addr,
1415                                    unsigned size)
1416 {
1417     StrongARMSSPState *s = opaque;
1418     uint32_t retval;
1419
1420     switch (addr) {
1421     case SSCR0:
1422         return s->sscr[0];
1423     case SSCR1:
1424         return s->sscr[1];
1425     case SSSR:
1426         return s->sssr;
1427     case SSDR:
1428         if (~s->sscr[0] & SSCR0_SSE) {
1429             return 0xffffffff;
1430         }
1431         if (s->rx_level < 1) {
1432             printf("%s: SSP Rx Underrun\n", __func__);
1433             return 0xffffffff;
1434         }
1435         s->rx_level--;
1436         retval = s->rx_fifo[s->rx_start++];
1437         s->rx_start &= 0x7;
1438         strongarm_ssp_fifo_update(s);
1439         return retval;
1440     default:
1441         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1442         break;
1443     }
1444     return 0;
1445 }
1446
1447 static void strongarm_ssp_write(void *opaque, hwaddr addr,
1448                                 uint64_t value, unsigned size)
1449 {
1450     StrongARMSSPState *s = opaque;
1451
1452     switch (addr) {
1453     case SSCR0:
1454         s->sscr[0] = value & 0xffbf;
1455         if ((s->sscr[0] & SSCR0_SSE) && SSCR0_DSS(value) < 4) {
1456             printf("%s: Wrong data size: %i bits\n", __func__,
1457                    (int)SSCR0_DSS(value));
1458         }
1459         if (!(value & SSCR0_SSE)) {
1460             s->sssr = 0;
1461             s->rx_level = 0;
1462         }
1463         strongarm_ssp_fifo_update(s);
1464         break;
1465
1466     case SSCR1:
1467         s->sscr[1] = value & 0x2f;
1468         if (value & SSCR1_LBM) {
1469             printf("%s: Attempt to use SSP LBM mode\n", __func__);
1470         }
1471         strongarm_ssp_fifo_update(s);
1472         break;
1473
1474     case SSSR:
1475         s->sssr &= ~(value & SSSR_RW);
1476         strongarm_ssp_int_update(s);
1477         break;
1478
1479     case SSDR:
1480         if (SSCR0_UWIRE(s->sscr[0])) {
1481             value &= 0xff;
1482         } else
1483             /* Note how 32bits overflow does no harm here */
1484             value &= (1 << SSCR0_DSS(s->sscr[0])) - 1;
1485
1486         /* Data goes from here to the Tx FIFO and is shifted out from
1487          * there directly to the slave, no need to buffer it.
1488          */
1489         if (s->sscr[0] & SSCR0_SSE) {
1490             uint32_t readval;
1491             if (s->sscr[1] & SSCR1_LBM) {
1492                 readval = value;
1493             } else {
1494                 readval = ssi_transfer(s->bus, value);
1495             }
1496
1497             if (s->rx_level < 0x08) {
1498                 s->rx_fifo[(s->rx_start + s->rx_level++) & 0x7] = readval;
1499             } else {
1500                 s->sssr |= SSSR_ROR;
1501             }
1502         }
1503         strongarm_ssp_fifo_update(s);
1504         break;
1505
1506     default:
1507         printf("%s: Bad register 0x" TARGET_FMT_plx "\n", __func__, addr);
1508         break;
1509     }
1510 }
1511
1512 static const MemoryRegionOps strongarm_ssp_ops = {
1513     .read = strongarm_ssp_read,
1514     .write = strongarm_ssp_write,
1515     .endianness = DEVICE_NATIVE_ENDIAN,
1516 };
1517
1518 static int strongarm_ssp_post_load(void *opaque, int version_id)
1519 {
1520     StrongARMSSPState *s = opaque;
1521
1522     strongarm_ssp_fifo_update(s);
1523
1524     return 0;
1525 }
1526
1527 static int strongarm_ssp_init(SysBusDevice *sbd)
1528 {
1529     DeviceState *dev = DEVICE(sbd);
1530     StrongARMSSPState *s = STRONGARM_SSP(dev);
1531
1532     sysbus_init_irq(sbd, &s->irq);
1533
1534     memory_region_init_io(&s->iomem, OBJECT(s), &strongarm_ssp_ops, s,
1535                           "ssp", 0x1000);
1536     sysbus_init_mmio(sbd, &s->iomem);
1537
1538     s->bus = ssi_create_bus(dev, "ssi");
1539     return 0;
1540 }
1541
1542 static void strongarm_ssp_reset(DeviceState *dev)
1543 {
1544     StrongARMSSPState *s = STRONGARM_SSP(dev);
1545
1546     s->sssr = 0x03; /* 3 bit data, SPI, disabled */
1547     s->rx_start = 0;
1548     s->rx_level = 0;
1549 }
1550
1551 static const VMStateDescription vmstate_strongarm_ssp_regs = {
1552     .name = "strongarm-ssp",
1553     .version_id = 0,
1554     .minimum_version_id = 0,
1555     .post_load = strongarm_ssp_post_load,
1556     .fields = (VMStateField[]) {
1557         VMSTATE_UINT16_ARRAY(sscr, StrongARMSSPState, 2),
1558         VMSTATE_UINT16(sssr, StrongARMSSPState),
1559         VMSTATE_UINT16_ARRAY(rx_fifo, StrongARMSSPState, 8),
1560         VMSTATE_UINT8(rx_start, StrongARMSSPState),
1561         VMSTATE_UINT8(rx_level, StrongARMSSPState),
1562         VMSTATE_END_OF_LIST(),
1563     },
1564 };
1565
1566 static void strongarm_ssp_class_init(ObjectClass *klass, void *data)
1567 {
1568     DeviceClass *dc = DEVICE_CLASS(klass);
1569     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
1570
1571     k->init = strongarm_ssp_init;
1572     dc->desc = "StrongARM SSP controller";
1573     dc->reset = strongarm_ssp_reset;
1574     dc->vmsd = &vmstate_strongarm_ssp_regs;
1575 }
1576
1577 static const TypeInfo strongarm_ssp_info = {
1578     .name          = TYPE_STRONGARM_SSP,
1579     .parent        = TYPE_SYS_BUS_DEVICE,
1580     .instance_size = sizeof(StrongARMSSPState),
1581     .class_init    = strongarm_ssp_class_init,
1582 };
1583
1584 /* Main CPU functions */
1585 StrongARMState *sa1110_init(MemoryRegion *sysmem,
1586                             unsigned int sdram_size, const char *rev)
1587 {
1588     StrongARMState *s;
1589     int i;
1590
1591     s = g_new0(StrongARMState, 1);
1592
1593     if (!rev) {
1594         rev = "sa1110-b5";
1595     }
1596
1597     if (strncmp(rev, "sa1110", 6)) {
1598         error_report("Machine requires a SA1110 processor.");
1599         exit(1);
1600     }
1601
1602     s->cpu = cpu_arm_init(rev);
1603
1604     if (!s->cpu) {
1605         error_report("Unable to find CPU definition");
1606         exit(1);
1607     }
1608
1609     memory_region_allocate_system_memory(&s->sdram, NULL, "strongarm.sdram",
1610                                          sdram_size);
1611     memory_region_add_subregion(sysmem, SA_SDCS0, &s->sdram);
1612
1613     s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000,
1614                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ),
1615                     qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ),
1616                     NULL);
1617
1618     sysbus_create_varargs("pxa25x-timer", 0x90000000,
1619                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC0),
1620                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC1),
1621                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC2),
1622                     qdev_get_gpio_in(s->pic, SA_PIC_OSTC3),
1623                     NULL);
1624
1625     sysbus_create_simple(TYPE_STRONGARM_RTC, 0x90010000,
1626                     qdev_get_gpio_in(s->pic, SA_PIC_RTC_ALARM));
1627
1628     s->gpio = strongarm_gpio_init(0x90040000, s->pic);
1629
1630     s->ppc = sysbus_create_varargs(TYPE_STRONGARM_PPC, 0x90060000, NULL);
1631
1632     for (i = 0; sa_serial[i].io_base; i++) {
1633         DeviceState *dev = qdev_create(NULL, TYPE_STRONGARM_UART);
1634         qdev_prop_set_chr(dev, "chardev", serial_hds[i]);
1635         qdev_init_nofail(dev);
1636         sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
1637                 sa_serial[i].io_base);
1638         sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
1639                 qdev_get_gpio_in(s->pic, sa_serial[i].irq));
1640     }
1641
1642     s->ssp = sysbus_create_varargs(TYPE_STRONGARM_SSP, 0x80070000,
1643                 qdev_get_gpio_in(s->pic, SA_PIC_SSP), NULL);
1644     s->ssp_bus = (SSIBus *)qdev_get_child_bus(s->ssp, "ssi");
1645
1646     return s;
1647 }
1648
1649 static void strongarm_register_types(void)
1650 {
1651     type_register_static(&strongarm_pic_info);
1652     type_register_static(&strongarm_rtc_sysbus_info);
1653     type_register_static(&strongarm_gpio_info);
1654     type_register_static(&strongarm_ppc_info);
1655     type_register_static(&strongarm_uart_info);
1656     type_register_static(&strongarm_ssp_info);
1657 }
1658
1659 type_init(strongarm_register_types)