2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ
= 0x1,
56 BDRV_REQ_ZERO_WRITE
= 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BlockDriverCompletionFunc
*cb
,
85 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
86 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
87 int64_t sector_num
, int nb_sectors
);
89 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
90 bool is_write
, double elapsed_time
, uint64_t *wait
);
91 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
92 double elapsed_time
, uint64_t *wait
);
93 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
94 bool is_write
, int64_t *wait
);
96 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
97 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
99 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
100 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
102 /* If non-zero, use only whitelisted block drivers */
103 static int use_bdrv_whitelist
;
106 static int is_windows_drive_prefix(const char *filename
)
108 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
109 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
113 int is_windows_drive(const char *filename
)
115 if (is_windows_drive_prefix(filename
) &&
118 if (strstart(filename
, "\\\\.\\", NULL
) ||
119 strstart(filename
, "//./", NULL
))
125 /* throttling disk I/O limits */
126 void bdrv_io_limits_disable(BlockDriverState
*bs
)
128 bs
->io_limits_enabled
= false;
130 while (qemu_co_queue_next(&bs
->throttled_reqs
));
132 if (bs
->block_timer
) {
133 qemu_del_timer(bs
->block_timer
);
134 qemu_free_timer(bs
->block_timer
);
135 bs
->block_timer
= NULL
;
142 static void bdrv_block_timer(void *opaque
)
144 BlockDriverState
*bs
= opaque
;
146 qemu_co_queue_next(&bs
->throttled_reqs
);
149 void bdrv_io_limits_enable(BlockDriverState
*bs
)
151 qemu_co_queue_init(&bs
->throttled_reqs
);
152 bs
->block_timer
= qemu_new_timer_ns(vm_clock
, bdrv_block_timer
, bs
);
153 bs
->io_limits_enabled
= true;
156 bool bdrv_io_limits_enabled(BlockDriverState
*bs
)
158 BlockIOLimit
*io_limits
= &bs
->io_limits
;
159 return io_limits
->bps
[BLOCK_IO_LIMIT_READ
]
160 || io_limits
->bps
[BLOCK_IO_LIMIT_WRITE
]
161 || io_limits
->bps
[BLOCK_IO_LIMIT_TOTAL
]
162 || io_limits
->iops
[BLOCK_IO_LIMIT_READ
]
163 || io_limits
->iops
[BLOCK_IO_LIMIT_WRITE
]
164 || io_limits
->iops
[BLOCK_IO_LIMIT_TOTAL
];
167 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
168 bool is_write
, int nb_sectors
)
170 int64_t wait_time
= -1;
172 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
173 qemu_co_queue_wait(&bs
->throttled_reqs
);
176 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
177 * throttled requests will not be dequeued until the current request is
178 * allowed to be serviced. So if the current request still exceeds the
179 * limits, it will be inserted to the head. All requests followed it will
180 * be still in throttled_reqs queue.
183 while (bdrv_exceed_io_limits(bs
, nb_sectors
, is_write
, &wait_time
)) {
184 qemu_mod_timer(bs
->block_timer
,
185 wait_time
+ qemu_get_clock_ns(vm_clock
));
186 qemu_co_queue_wait_insert_head(&bs
->throttled_reqs
);
189 qemu_co_queue_next(&bs
->throttled_reqs
);
192 /* check if the path starts with "<protocol>:" */
193 static int path_has_protocol(const char *path
)
198 if (is_windows_drive(path
) ||
199 is_windows_drive_prefix(path
)) {
202 p
= path
+ strcspn(path
, ":/\\");
204 p
= path
+ strcspn(path
, ":/");
210 int path_is_absolute(const char *path
)
213 /* specific case for names like: "\\.\d:" */
214 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
217 return (*path
== '/' || *path
== '\\');
219 return (*path
== '/');
223 /* if filename is absolute, just copy it to dest. Otherwise, build a
224 path to it by considering it is relative to base_path. URL are
226 void path_combine(char *dest
, int dest_size
,
227 const char *base_path
,
228 const char *filename
)
235 if (path_is_absolute(filename
)) {
236 pstrcpy(dest
, dest_size
, filename
);
238 p
= strchr(base_path
, ':');
243 p1
= strrchr(base_path
, '/');
247 p2
= strrchr(base_path
, '\\');
259 if (len
> dest_size
- 1)
261 memcpy(dest
, base_path
, len
);
263 pstrcat(dest
, dest_size
, filename
);
267 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
269 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
270 pstrcpy(dest
, sz
, bs
->backing_file
);
272 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
276 void bdrv_register(BlockDriver
*bdrv
)
278 /* Block drivers without coroutine functions need emulation */
279 if (!bdrv
->bdrv_co_readv
) {
280 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
281 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
283 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
284 * the block driver lacks aio we need to emulate that too.
286 if (!bdrv
->bdrv_aio_readv
) {
287 /* add AIO emulation layer */
288 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
289 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
293 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
296 /* create a new block device (by default it is empty) */
297 BlockDriverState
*bdrv_new(const char *device_name
)
299 BlockDriverState
*bs
;
301 bs
= g_malloc0(sizeof(BlockDriverState
));
302 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
303 if (device_name
[0] != '\0') {
304 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
306 bdrv_iostatus_disable(bs
);
307 notifier_list_init(&bs
->close_notifiers
);
308 notifier_with_return_list_init(&bs
->before_write_notifiers
);
313 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
315 notifier_list_add(&bs
->close_notifiers
, notify
);
318 BlockDriver
*bdrv_find_format(const char *format_name
)
321 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
322 if (!strcmp(drv1
->format_name
, format_name
)) {
329 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
331 static const char *whitelist_rw
[] = {
332 CONFIG_BDRV_RW_WHITELIST
334 static const char *whitelist_ro
[] = {
335 CONFIG_BDRV_RO_WHITELIST
339 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
340 return 1; /* no whitelist, anything goes */
343 for (p
= whitelist_rw
; *p
; p
++) {
344 if (!strcmp(drv
->format_name
, *p
)) {
349 for (p
= whitelist_ro
; *p
; p
++) {
350 if (!strcmp(drv
->format_name
, *p
)) {
358 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
361 BlockDriver
*drv
= bdrv_find_format(format_name
);
362 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
365 typedef struct CreateCo
{
368 QEMUOptionParameter
*options
;
372 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
374 CreateCo
*cco
= opaque
;
377 cco
->ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
);
380 int bdrv_create(BlockDriver
*drv
, const char* filename
,
381 QEMUOptionParameter
*options
)
388 .filename
= g_strdup(filename
),
393 if (!drv
->bdrv_create
) {
398 if (qemu_in_coroutine()) {
399 /* Fast-path if already in coroutine context */
400 bdrv_create_co_entry(&cco
);
402 co
= qemu_coroutine_create(bdrv_create_co_entry
);
403 qemu_coroutine_enter(co
, &cco
);
404 while (cco
.ret
== NOT_DONE
) {
412 g_free(cco
.filename
);
416 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
)
420 drv
= bdrv_find_protocol(filename
, true);
425 return bdrv_create(drv
, filename
, options
);
429 * Create a uniquely-named empty temporary file.
430 * Return 0 upon success, otherwise a negative errno value.
432 int get_tmp_filename(char *filename
, int size
)
435 char temp_dir
[MAX_PATH
];
436 /* GetTempFileName requires that its output buffer (4th param)
437 have length MAX_PATH or greater. */
438 assert(size
>= MAX_PATH
);
439 return (GetTempPath(MAX_PATH
, temp_dir
)
440 && GetTempFileName(temp_dir
, "qem", 0, filename
)
441 ? 0 : -GetLastError());
445 tmpdir
= getenv("TMPDIR");
448 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
451 fd
= mkstemp(filename
);
455 if (close(fd
) != 0) {
464 * Detect host devices. By convention, /dev/cdrom[N] is always
465 * recognized as a host CDROM.
467 static BlockDriver
*find_hdev_driver(const char *filename
)
469 int score_max
= 0, score
;
470 BlockDriver
*drv
= NULL
, *d
;
472 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
473 if (d
->bdrv_probe_device
) {
474 score
= d
->bdrv_probe_device(filename
);
475 if (score
> score_max
) {
485 BlockDriver
*bdrv_find_protocol(const char *filename
,
486 bool allow_protocol_prefix
)
493 /* TODO Drivers without bdrv_file_open must be specified explicitly */
496 * XXX(hch): we really should not let host device detection
497 * override an explicit protocol specification, but moving this
498 * later breaks access to device names with colons in them.
499 * Thanks to the brain-dead persistent naming schemes on udev-
500 * based Linux systems those actually are quite common.
502 drv1
= find_hdev_driver(filename
);
507 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
508 return bdrv_find_format("file");
511 p
= strchr(filename
, ':');
514 if (len
> sizeof(protocol
) - 1)
515 len
= sizeof(protocol
) - 1;
516 memcpy(protocol
, filename
, len
);
517 protocol
[len
] = '\0';
518 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
519 if (drv1
->protocol_name
&&
520 !strcmp(drv1
->protocol_name
, protocol
)) {
527 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
530 int score
, score_max
;
531 BlockDriver
*drv1
, *drv
;
535 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
536 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
537 drv
= bdrv_find_format("raw");
545 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
553 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
554 if (drv1
->bdrv_probe
) {
555 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
556 if (score
> score_max
) {
570 * Set the current 'total_sectors' value
572 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
574 BlockDriver
*drv
= bs
->drv
;
576 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
580 /* query actual device if possible, otherwise just trust the hint */
581 if (drv
->bdrv_getlength
) {
582 int64_t length
= drv
->bdrv_getlength(bs
);
586 hint
= length
>> BDRV_SECTOR_BITS
;
589 bs
->total_sectors
= hint
;
594 * Set open flags for a given discard mode
596 * Return 0 on success, -1 if the discard mode was invalid.
598 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
600 *flags
&= ~BDRV_O_UNMAP
;
602 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
604 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
605 *flags
|= BDRV_O_UNMAP
;
614 * Set open flags for a given cache mode
616 * Return 0 on success, -1 if the cache mode was invalid.
618 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
620 *flags
&= ~BDRV_O_CACHE_MASK
;
622 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
623 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
624 } else if (!strcmp(mode
, "directsync")) {
625 *flags
|= BDRV_O_NOCACHE
;
626 } else if (!strcmp(mode
, "writeback")) {
627 *flags
|= BDRV_O_CACHE_WB
;
628 } else if (!strcmp(mode
, "unsafe")) {
629 *flags
|= BDRV_O_CACHE_WB
;
630 *flags
|= BDRV_O_NO_FLUSH
;
631 } else if (!strcmp(mode
, "writethrough")) {
632 /* this is the default */
641 * The copy-on-read flag is actually a reference count so multiple users may
642 * use the feature without worrying about clobbering its previous state.
643 * Copy-on-read stays enabled until all users have called to disable it.
645 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
650 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
652 assert(bs
->copy_on_read
> 0);
656 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
658 int open_flags
= flags
| BDRV_O_CACHE_WB
;
661 * Clear flags that are internal to the block layer before opening the
664 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
667 * Snapshots should be writable.
669 if (bs
->is_temporary
) {
670 open_flags
|= BDRV_O_RDWR
;
677 * Common part for opening disk images and files
679 * Removes all processed options from *options.
681 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
682 QDict
*options
, int flags
, BlockDriver
*drv
)
685 const char *filename
;
688 assert(bs
->file
== NULL
);
689 assert(options
!= NULL
&& bs
->options
!= options
);
692 filename
= file
->filename
;
694 filename
= qdict_get_try_str(options
, "filename");
697 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
699 /* bdrv_open() with directly using a protocol as drv. This layer is already
700 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
701 * and return immediately. */
702 if (file
!= NULL
&& drv
->bdrv_file_open
) {
707 bs
->open_flags
= flags
;
708 bs
->buffer_alignment
= 512;
709 open_flags
= bdrv_open_flags(bs
, flags
);
710 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
712 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
716 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
717 if (!bs
->read_only
&& (flags
& BDRV_O_COPY_ON_READ
)) {
718 bdrv_enable_copy_on_read(bs
);
721 if (filename
!= NULL
) {
722 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
724 bs
->filename
[0] = '\0';
728 bs
->opaque
= g_malloc0(drv
->instance_size
);
730 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
732 /* Open the image, either directly or using a protocol */
733 if (drv
->bdrv_file_open
) {
734 assert(file
== NULL
);
735 assert(drv
->bdrv_parse_filename
|| filename
!= NULL
);
736 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
);
739 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Can't use '%s' as a "
740 "block driver for the protocol level",
745 assert(file
!= NULL
);
747 ret
= drv
->bdrv_open(bs
, options
, open_flags
);
754 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
760 if (bs
->is_temporary
) {
761 assert(filename
!= NULL
);
776 * Opens a file using a protocol (file, host_device, nbd, ...)
778 * options is a QDict of options to pass to the block drivers, or NULL for an
779 * empty set of options. The reference to the QDict belongs to the block layer
780 * after the call (even on failure), so if the caller intends to reuse the
781 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
783 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
,
784 QDict
*options
, int flags
)
786 BlockDriverState
*bs
;
789 bool allow_protocol_prefix
= false;
792 /* NULL means an empty set of options */
793 if (options
== NULL
) {
794 options
= qdict_new();
798 bs
->options
= options
;
799 options
= qdict_clone_shallow(options
);
801 /* Fetch the file name from the options QDict if necessary */
803 filename
= qdict_get_try_str(options
, "filename");
804 } else if (filename
&& !qdict_haskey(options
, "filename")) {
805 qdict_put(options
, "filename", qstring_from_str(filename
));
806 allow_protocol_prefix
= true;
808 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Can't specify 'file' and "
809 "'filename' options at the same time");
814 /* Find the right block driver */
815 drvname
= qdict_get_try_str(options
, "driver");
817 drv
= bdrv_find_whitelisted_format(drvname
, !(flags
& BDRV_O_RDWR
));
818 qdict_del(options
, "driver");
819 } else if (filename
) {
820 drv
= bdrv_find_protocol(filename
, allow_protocol_prefix
);
822 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Unknown protocol");
825 qerror_report(ERROR_CLASS_GENERIC_ERROR
,
826 "Must specify either driver or file");
835 /* Parse the filename and open it */
836 if (drv
->bdrv_parse_filename
&& filename
) {
837 Error
*local_err
= NULL
;
838 drv
->bdrv_parse_filename(filename
, options
, &local_err
);
839 if (error_is_set(&local_err
)) {
840 qerror_report_err(local_err
);
841 error_free(local_err
);
845 qdict_del(options
, "filename");
846 } else if (!drv
->bdrv_parse_filename
&& !filename
) {
847 qerror_report(ERROR_CLASS_GENERIC_ERROR
,
848 "The '%s' block driver requires a file name",
854 ret
= bdrv_open_common(bs
, NULL
, options
, flags
, drv
);
859 /* Check if any unknown options were used */
860 if (qdict_size(options
) != 0) {
861 const QDictEntry
*entry
= qdict_first(options
);
862 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Block protocol '%s' doesn't "
863 "support the option '%s'",
864 drv
->format_name
, entry
->key
);
877 QDECREF(bs
->options
);
884 * Opens the backing file for a BlockDriverState if not yet open
886 * options is a QDict of options to pass to the block drivers, or NULL for an
887 * empty set of options. The reference to the QDict is transferred to this
888 * function (even on failure), so if the caller intends to reuse the dictionary,
889 * it needs to use QINCREF() before calling bdrv_file_open.
891 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
)
893 char backing_filename
[PATH_MAX
];
895 BlockDriver
*back_drv
= NULL
;
897 if (bs
->backing_hd
!= NULL
) {
902 /* NULL means an empty set of options */
903 if (options
== NULL
) {
904 options
= qdict_new();
907 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
908 if (qdict_haskey(options
, "file.filename")) {
909 backing_filename
[0] = '\0';
910 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
915 bs
->backing_hd
= bdrv_new("");
916 bdrv_get_full_backing_filename(bs
, backing_filename
,
917 sizeof(backing_filename
));
919 if (bs
->backing_format
[0] != '\0') {
920 back_drv
= bdrv_find_format(bs
->backing_format
);
923 /* backing files always opened read-only */
924 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
);
926 ret
= bdrv_open(bs
->backing_hd
,
927 *backing_filename
? backing_filename
: NULL
, options
,
928 back_flags
, back_drv
);
930 bdrv_delete(bs
->backing_hd
);
931 bs
->backing_hd
= NULL
;
932 bs
->open_flags
|= BDRV_O_NO_BACKING
;
938 static void extract_subqdict(QDict
*src
, QDict
**dst
, const char *start
)
940 const QDictEntry
*entry
, *next
;
944 entry
= qdict_first(src
);
946 while (entry
!= NULL
) {
947 next
= qdict_next(src
, entry
);
948 if (strstart(entry
->key
, start
, &p
)) {
949 qobject_incref(entry
->value
);
950 qdict_put_obj(*dst
, p
, entry
->value
);
951 qdict_del(src
, entry
->key
);
958 * Opens a disk image (raw, qcow2, vmdk, ...)
960 * options is a QDict of options to pass to the block drivers, or NULL for an
961 * empty set of options. The reference to the QDict belongs to the block layer
962 * after the call (even on failure), so if the caller intends to reuse the
963 * dictionary, it needs to use QINCREF() before calling bdrv_open.
965 int bdrv_open(BlockDriverState
*bs
, const char *filename
, QDict
*options
,
966 int flags
, BlockDriver
*drv
)
969 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
970 char tmp_filename
[PATH_MAX
+ 1];
971 BlockDriverState
*file
= NULL
;
972 QDict
*file_options
= NULL
;
974 /* NULL means an empty set of options */
975 if (options
== NULL
) {
976 options
= qdict_new();
979 bs
->options
= options
;
980 options
= qdict_clone_shallow(options
);
982 /* For snapshot=on, create a temporary qcow2 overlay */
983 if (flags
& BDRV_O_SNAPSHOT
) {
984 BlockDriverState
*bs1
;
986 BlockDriver
*bdrv_qcow2
;
987 QEMUOptionParameter
*create_options
;
988 char backing_filename
[PATH_MAX
];
990 if (qdict_size(options
) != 0) {
991 error_report("Can't use snapshot=on with driver-specific options");
995 assert(filename
!= NULL
);
997 /* if snapshot, we create a temporary backing file and open it
998 instead of opening 'filename' directly */
1000 /* if there is a backing file, use it */
1002 ret
= bdrv_open(bs1
, filename
, NULL
, 0, drv
);
1007 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
1011 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
1016 /* Real path is meaningless for protocols */
1017 if (path_has_protocol(filename
)) {
1018 snprintf(backing_filename
, sizeof(backing_filename
),
1020 } else if (!realpath(filename
, backing_filename
)) {
1025 bdrv_qcow2
= bdrv_find_format("qcow2");
1026 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1029 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1030 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FILE
,
1033 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FMT
,
1037 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
);
1038 free_option_parameters(create_options
);
1043 filename
= tmp_filename
;
1045 bs
->is_temporary
= 1;
1048 /* Open image file without format layer */
1049 if (flags
& BDRV_O_RDWR
) {
1050 flags
|= BDRV_O_ALLOW_RDWR
;
1053 extract_subqdict(options
, &file_options
, "file.");
1055 ret
= bdrv_file_open(&file
, filename
, file_options
,
1056 bdrv_open_flags(bs
, flags
| BDRV_O_UNMAP
));
1061 /* Find the right image format driver */
1063 ret
= find_image_format(file
, filename
, &drv
);
1067 goto unlink_and_fail
;
1070 /* Open the image */
1071 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
);
1073 goto unlink_and_fail
;
1076 if (bs
->file
!= file
) {
1081 /* If there is a backing file, use it */
1082 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1083 QDict
*backing_options
;
1085 extract_subqdict(options
, &backing_options
, "backing.");
1086 ret
= bdrv_open_backing_file(bs
, backing_options
);
1088 goto close_and_fail
;
1092 /* Check if any unknown options were used */
1093 if (qdict_size(options
) != 0) {
1094 const QDictEntry
*entry
= qdict_first(options
);
1095 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Block format '%s' used by "
1096 "device '%s' doesn't support the option '%s'",
1097 drv
->format_name
, bs
->device_name
, entry
->key
);
1100 goto close_and_fail
;
1104 if (!bdrv_key_required(bs
)) {
1105 bdrv_dev_change_media_cb(bs
, true);
1108 /* throttling disk I/O limits */
1109 if (bs
->io_limits_enabled
) {
1110 bdrv_io_limits_enable(bs
);
1119 if (bs
->is_temporary
) {
1123 QDECREF(bs
->options
);
1134 typedef struct BlockReopenQueueEntry
{
1136 BDRVReopenState state
;
1137 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1138 } BlockReopenQueueEntry
;
1141 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1142 * reopen of multiple devices.
1144 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1145 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1146 * be created and initialized. This newly created BlockReopenQueue should be
1147 * passed back in for subsequent calls that are intended to be of the same
1150 * bs is the BlockDriverState to add to the reopen queue.
1152 * flags contains the open flags for the associated bs
1154 * returns a pointer to bs_queue, which is either the newly allocated
1155 * bs_queue, or the existing bs_queue being used.
1158 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1159 BlockDriverState
*bs
, int flags
)
1163 BlockReopenQueueEntry
*bs_entry
;
1164 if (bs_queue
== NULL
) {
1165 bs_queue
= g_new0(BlockReopenQueue
, 1);
1166 QSIMPLEQ_INIT(bs_queue
);
1170 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
1173 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1174 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1176 bs_entry
->state
.bs
= bs
;
1177 bs_entry
->state
.flags
= flags
;
1183 * Reopen multiple BlockDriverStates atomically & transactionally.
1185 * The queue passed in (bs_queue) must have been built up previous
1186 * via bdrv_reopen_queue().
1188 * Reopens all BDS specified in the queue, with the appropriate
1189 * flags. All devices are prepared for reopen, and failure of any
1190 * device will cause all device changes to be abandonded, and intermediate
1193 * If all devices prepare successfully, then the changes are committed
1197 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1200 BlockReopenQueueEntry
*bs_entry
, *next
;
1201 Error
*local_err
= NULL
;
1203 assert(bs_queue
!= NULL
);
1207 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1208 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1209 error_propagate(errp
, local_err
);
1212 bs_entry
->prepared
= true;
1215 /* If we reach this point, we have success and just need to apply the
1218 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1219 bdrv_reopen_commit(&bs_entry
->state
);
1225 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1226 if (ret
&& bs_entry
->prepared
) {
1227 bdrv_reopen_abort(&bs_entry
->state
);
1236 /* Reopen a single BlockDriverState with the specified flags. */
1237 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1240 Error
*local_err
= NULL
;
1241 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1243 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1244 if (local_err
!= NULL
) {
1245 error_propagate(errp
, local_err
);
1252 * Prepares a BlockDriverState for reopen. All changes are staged in the
1253 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1254 * the block driver layer .bdrv_reopen_prepare()
1256 * bs is the BlockDriverState to reopen
1257 * flags are the new open flags
1258 * queue is the reopen queue
1260 * Returns 0 on success, non-zero on error. On error errp will be set
1263 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1264 * It is the responsibility of the caller to then call the abort() or
1265 * commit() for any other BDS that have been left in a prepare() state
1268 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1272 Error
*local_err
= NULL
;
1275 assert(reopen_state
!= NULL
);
1276 assert(reopen_state
->bs
->drv
!= NULL
);
1277 drv
= reopen_state
->bs
->drv
;
1279 /* if we are to stay read-only, do not allow permission change
1281 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1282 reopen_state
->flags
& BDRV_O_RDWR
) {
1283 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1284 reopen_state
->bs
->device_name
);
1289 ret
= bdrv_flush(reopen_state
->bs
);
1291 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1296 if (drv
->bdrv_reopen_prepare
) {
1297 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1299 if (local_err
!= NULL
) {
1300 error_propagate(errp
, local_err
);
1302 error_setg(errp
, "failed while preparing to reopen image '%s'",
1303 reopen_state
->bs
->filename
);
1308 /* It is currently mandatory to have a bdrv_reopen_prepare()
1309 * handler for each supported drv. */
1310 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1311 drv
->format_name
, reopen_state
->bs
->device_name
,
1312 "reopening of file");
1324 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1325 * makes them final by swapping the staging BlockDriverState contents into
1326 * the active BlockDriverState contents.
1328 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1332 assert(reopen_state
!= NULL
);
1333 drv
= reopen_state
->bs
->drv
;
1334 assert(drv
!= NULL
);
1336 /* If there are any driver level actions to take */
1337 if (drv
->bdrv_reopen_commit
) {
1338 drv
->bdrv_reopen_commit(reopen_state
);
1341 /* set BDS specific flags now */
1342 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1343 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1345 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1349 * Abort the reopen, and delete and free the staged changes in
1352 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1356 assert(reopen_state
!= NULL
);
1357 drv
= reopen_state
->bs
->drv
;
1358 assert(drv
!= NULL
);
1360 if (drv
->bdrv_reopen_abort
) {
1361 drv
->bdrv_reopen_abort(reopen_state
);
1366 void bdrv_close(BlockDriverState
*bs
)
1369 block_job_cancel_sync(bs
->job
);
1371 bdrv_drain_all(); /* complete I/O */
1373 bdrv_drain_all(); /* in case flush left pending I/O */
1374 notifier_list_notify(&bs
->close_notifiers
, bs
);
1377 if (bs
->backing_hd
) {
1378 bdrv_delete(bs
->backing_hd
);
1379 bs
->backing_hd
= NULL
;
1381 bs
->drv
->bdrv_close(bs
);
1384 if (bs
->is_temporary
) {
1385 unlink(bs
->filename
);
1390 bs
->copy_on_read
= 0;
1391 bs
->backing_file
[0] = '\0';
1392 bs
->backing_format
[0] = '\0';
1393 bs
->total_sectors
= 0;
1398 QDECREF(bs
->options
);
1401 if (bs
->file
!= NULL
) {
1402 bdrv_delete(bs
->file
);
1407 bdrv_dev_change_media_cb(bs
, false);
1409 /*throttling disk I/O limits*/
1410 if (bs
->io_limits_enabled
) {
1411 bdrv_io_limits_disable(bs
);
1415 void bdrv_close_all(void)
1417 BlockDriverState
*bs
;
1419 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1425 * Wait for pending requests to complete across all BlockDriverStates
1427 * This function does not flush data to disk, use bdrv_flush_all() for that
1428 * after calling this function.
1430 * Note that completion of an asynchronous I/O operation can trigger any
1431 * number of other I/O operations on other devices---for example a coroutine
1432 * can be arbitrarily complex and a constant flow of I/O can come until the
1433 * coroutine is complete. Because of this, it is not possible to have a
1434 * function to drain a single device's I/O queue.
1436 void bdrv_drain_all(void)
1438 BlockDriverState
*bs
;
1442 busy
= qemu_aio_wait();
1444 /* FIXME: We do not have timer support here, so this is effectively
1447 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1448 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
1449 qemu_co_queue_restart_all(&bs
->throttled_reqs
);
1455 /* If requests are still pending there is a bug somewhere */
1456 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1457 assert(QLIST_EMPTY(&bs
->tracked_requests
));
1458 assert(qemu_co_queue_empty(&bs
->throttled_reqs
));
1462 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1463 Also, NULL terminate the device_name to prevent double remove */
1464 void bdrv_make_anon(BlockDriverState
*bs
)
1466 if (bs
->device_name
[0] != '\0') {
1467 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1469 bs
->device_name
[0] = '\0';
1472 static void bdrv_rebind(BlockDriverState
*bs
)
1474 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1475 bs
->drv
->bdrv_rebind(bs
);
1479 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1480 BlockDriverState
*bs_src
)
1482 /* move some fields that need to stay attached to the device */
1483 bs_dest
->open_flags
= bs_src
->open_flags
;
1486 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1487 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1488 bs_dest
->dev
= bs_src
->dev
;
1489 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1490 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1492 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1494 /* i/o timing parameters */
1495 bs_dest
->slice_start
= bs_src
->slice_start
;
1496 bs_dest
->slice_end
= bs_src
->slice_end
;
1497 bs_dest
->slice_submitted
= bs_src
->slice_submitted
;
1498 bs_dest
->io_limits
= bs_src
->io_limits
;
1499 bs_dest
->throttled_reqs
= bs_src
->throttled_reqs
;
1500 bs_dest
->block_timer
= bs_src
->block_timer
;
1501 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1504 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1505 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1508 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1509 bs_dest
->iostatus
= bs_src
->iostatus
;
1512 bs_dest
->dirty_bitmap
= bs_src
->dirty_bitmap
;
1515 bs_dest
->in_use
= bs_src
->in_use
;
1516 bs_dest
->job
= bs_src
->job
;
1518 /* keep the same entry in bdrv_states */
1519 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1520 bs_src
->device_name
);
1521 bs_dest
->list
= bs_src
->list
;
1525 * Swap bs contents for two image chains while they are live,
1526 * while keeping required fields on the BlockDriverState that is
1527 * actually attached to a device.
1529 * This will modify the BlockDriverState fields, and swap contents
1530 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1532 * bs_new is required to be anonymous.
1534 * This function does not create any image files.
1536 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1538 BlockDriverState tmp
;
1540 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1541 assert(bs_new
->device_name
[0] == '\0');
1542 assert(bs_new
->dirty_bitmap
== NULL
);
1543 assert(bs_new
->job
== NULL
);
1544 assert(bs_new
->dev
== NULL
);
1545 assert(bs_new
->in_use
== 0);
1546 assert(bs_new
->io_limits_enabled
== false);
1547 assert(bs_new
->block_timer
== NULL
);
1553 /* there are some fields that should not be swapped, move them back */
1554 bdrv_move_feature_fields(&tmp
, bs_old
);
1555 bdrv_move_feature_fields(bs_old
, bs_new
);
1556 bdrv_move_feature_fields(bs_new
, &tmp
);
1558 /* bs_new shouldn't be in bdrv_states even after the swap! */
1559 assert(bs_new
->device_name
[0] == '\0');
1561 /* Check a few fields that should remain attached to the device */
1562 assert(bs_new
->dev
== NULL
);
1563 assert(bs_new
->job
== NULL
);
1564 assert(bs_new
->in_use
== 0);
1565 assert(bs_new
->io_limits_enabled
== false);
1566 assert(bs_new
->block_timer
== NULL
);
1568 bdrv_rebind(bs_new
);
1569 bdrv_rebind(bs_old
);
1573 * Add new bs contents at the top of an image chain while the chain is
1574 * live, while keeping required fields on the top layer.
1576 * This will modify the BlockDriverState fields, and swap contents
1577 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1579 * bs_new is required to be anonymous.
1581 * This function does not create any image files.
1583 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1585 bdrv_swap(bs_new
, bs_top
);
1587 /* The contents of 'tmp' will become bs_top, as we are
1588 * swapping bs_new and bs_top contents. */
1589 bs_top
->backing_hd
= bs_new
;
1590 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1591 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1593 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1594 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1597 void bdrv_delete(BlockDriverState
*bs
)
1601 assert(!bs
->in_use
);
1603 /* remove from list, if necessary */
1611 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1612 /* TODO change to DeviceState *dev when all users are qdevified */
1618 bdrv_iostatus_reset(bs
);
1622 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1623 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1625 if (bdrv_attach_dev(bs
, dev
) < 0) {
1630 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1631 /* TODO change to DeviceState *dev when all users are qdevified */
1633 assert(bs
->dev
== dev
);
1636 bs
->dev_opaque
= NULL
;
1637 bs
->buffer_alignment
= 512;
1640 /* TODO change to return DeviceState * when all users are qdevified */
1641 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1646 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1650 bs
->dev_opaque
= opaque
;
1653 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1654 enum MonitorEvent ev
,
1655 BlockErrorAction action
, bool is_read
)
1658 const char *action_str
;
1661 case BDRV_ACTION_REPORT
:
1662 action_str
= "report";
1664 case BDRV_ACTION_IGNORE
:
1665 action_str
= "ignore";
1667 case BDRV_ACTION_STOP
:
1668 action_str
= "stop";
1674 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1677 is_read
? "read" : "write");
1678 monitor_protocol_event(ev
, data
);
1680 qobject_decref(data
);
1683 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1687 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1688 bdrv_get_device_name(bs
), ejected
);
1689 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1691 qobject_decref(data
);
1694 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1696 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1697 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1698 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1699 if (tray_was_closed
) {
1701 bdrv_emit_qmp_eject_event(bs
, true);
1705 bdrv_emit_qmp_eject_event(bs
, false);
1710 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1712 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1715 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1717 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1718 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1722 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1724 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1725 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1730 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1732 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1733 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1737 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1739 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1740 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1746 * Run consistency checks on an image
1748 * Returns 0 if the check could be completed (it doesn't mean that the image is
1749 * free of errors) or -errno when an internal error occurred. The results of the
1750 * check are stored in res.
1752 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1754 if (bs
->drv
->bdrv_check
== NULL
) {
1758 memset(res
, 0, sizeof(*res
));
1759 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1762 #define COMMIT_BUF_SECTORS 2048
1764 /* commit COW file into the raw image */
1765 int bdrv_commit(BlockDriverState
*bs
)
1767 BlockDriver
*drv
= bs
->drv
;
1768 int64_t sector
, total_sectors
;
1769 int n
, ro
, open_flags
;
1772 char filename
[PATH_MAX
];
1777 if (!bs
->backing_hd
) {
1781 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1785 ro
= bs
->backing_hd
->read_only
;
1786 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1787 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1788 open_flags
= bs
->backing_hd
->open_flags
;
1791 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1796 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1797 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1799 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1800 if (bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
)) {
1802 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1807 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1814 if (drv
->bdrv_make_empty
) {
1815 ret
= drv
->bdrv_make_empty(bs
);
1820 * Make sure all data we wrote to the backing device is actually
1824 bdrv_flush(bs
->backing_hd
);
1830 /* ignoring error return here */
1831 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1837 int bdrv_commit_all(void)
1839 BlockDriverState
*bs
;
1841 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1842 if (bs
->drv
&& bs
->backing_hd
) {
1843 int ret
= bdrv_commit(bs
);
1853 * Remove an active request from the tracked requests list
1855 * This function should be called when a tracked request is completing.
1857 static void tracked_request_end(BdrvTrackedRequest
*req
)
1859 QLIST_REMOVE(req
, list
);
1860 qemu_co_queue_restart_all(&req
->wait_queue
);
1864 * Add an active request to the tracked requests list
1866 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1867 BlockDriverState
*bs
,
1869 int nb_sectors
, bool is_write
)
1871 *req
= (BdrvTrackedRequest
){
1873 .sector_num
= sector_num
,
1874 .nb_sectors
= nb_sectors
,
1875 .is_write
= is_write
,
1876 .co
= qemu_coroutine_self(),
1879 qemu_co_queue_init(&req
->wait_queue
);
1881 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
1885 * Round a region to cluster boundaries
1887 void bdrv_round_to_clusters(BlockDriverState
*bs
,
1888 int64_t sector_num
, int nb_sectors
,
1889 int64_t *cluster_sector_num
,
1890 int *cluster_nb_sectors
)
1892 BlockDriverInfo bdi
;
1894 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
1895 *cluster_sector_num
= sector_num
;
1896 *cluster_nb_sectors
= nb_sectors
;
1898 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
1899 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
1900 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
1905 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
1906 int64_t sector_num
, int nb_sectors
) {
1908 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
1912 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
1918 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
1919 int64_t sector_num
, int nb_sectors
)
1921 BdrvTrackedRequest
*req
;
1922 int64_t cluster_sector_num
;
1923 int cluster_nb_sectors
;
1926 /* If we touch the same cluster it counts as an overlap. This guarantees
1927 * that allocating writes will be serialized and not race with each other
1928 * for the same cluster. For example, in copy-on-read it ensures that the
1929 * CoR read and write operations are atomic and guest writes cannot
1930 * interleave between them.
1932 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
1933 &cluster_sector_num
, &cluster_nb_sectors
);
1937 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
1938 if (tracked_request_overlaps(req
, cluster_sector_num
,
1939 cluster_nb_sectors
)) {
1940 /* Hitting this means there was a reentrant request, for
1941 * example, a block driver issuing nested requests. This must
1942 * never happen since it means deadlock.
1944 assert(qemu_coroutine_self() != req
->co
);
1946 qemu_co_queue_wait(&req
->wait_queue
);
1957 * -EINVAL - backing format specified, but no file
1958 * -ENOSPC - can't update the backing file because no space is left in the
1960 * -ENOTSUP - format driver doesn't support changing the backing file
1962 int bdrv_change_backing_file(BlockDriverState
*bs
,
1963 const char *backing_file
, const char *backing_fmt
)
1965 BlockDriver
*drv
= bs
->drv
;
1968 /* Backing file format doesn't make sense without a backing file */
1969 if (backing_fmt
&& !backing_file
) {
1973 if (drv
->bdrv_change_backing_file
!= NULL
) {
1974 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
1980 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
1981 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
1987 * Finds the image layer in the chain that has 'bs' as its backing file.
1989 * active is the current topmost image.
1991 * Returns NULL if bs is not found in active's image chain,
1992 * or if active == bs.
1994 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
1995 BlockDriverState
*bs
)
1997 BlockDriverState
*overlay
= NULL
;
1998 BlockDriverState
*intermediate
;
2000 assert(active
!= NULL
);
2003 /* if bs is the same as active, then by definition it has no overlay
2009 intermediate
= active
;
2010 while (intermediate
->backing_hd
) {
2011 if (intermediate
->backing_hd
== bs
) {
2012 overlay
= intermediate
;
2015 intermediate
= intermediate
->backing_hd
;
2021 typedef struct BlkIntermediateStates
{
2022 BlockDriverState
*bs
;
2023 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2024 } BlkIntermediateStates
;
2028 * Drops images above 'base' up to and including 'top', and sets the image
2029 * above 'top' to have base as its backing file.
2031 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2032 * information in 'bs' can be properly updated.
2034 * E.g., this will convert the following chain:
2035 * bottom <- base <- intermediate <- top <- active
2039 * bottom <- base <- active
2041 * It is allowed for bottom==base, in which case it converts:
2043 * base <- intermediate <- top <- active
2050 * if active == top, that is considered an error
2053 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2054 BlockDriverState
*base
)
2056 BlockDriverState
*intermediate
;
2057 BlockDriverState
*base_bs
= NULL
;
2058 BlockDriverState
*new_top_bs
= NULL
;
2059 BlkIntermediateStates
*intermediate_state
, *next
;
2062 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2063 QSIMPLEQ_INIT(&states_to_delete
);
2065 if (!top
->drv
|| !base
->drv
) {
2069 new_top_bs
= bdrv_find_overlay(active
, top
);
2071 if (new_top_bs
== NULL
) {
2072 /* we could not find the image above 'top', this is an error */
2076 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2077 * to do, no intermediate images */
2078 if (new_top_bs
->backing_hd
== base
) {
2085 /* now we will go down through the list, and add each BDS we find
2086 * into our deletion queue, until we hit the 'base'
2088 while (intermediate
) {
2089 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2090 intermediate_state
->bs
= intermediate
;
2091 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2093 if (intermediate
->backing_hd
== base
) {
2094 base_bs
= intermediate
->backing_hd
;
2097 intermediate
= intermediate
->backing_hd
;
2099 if (base_bs
== NULL
) {
2100 /* something went wrong, we did not end at the base. safely
2101 * unravel everything, and exit with error */
2105 /* success - we can delete the intermediate states, and link top->base */
2106 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2107 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2111 new_top_bs
->backing_hd
= base_bs
;
2114 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2115 /* so that bdrv_close() does not recursively close the chain */
2116 intermediate_state
->bs
->backing_hd
= NULL
;
2117 bdrv_delete(intermediate_state
->bs
);
2122 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2123 g_free(intermediate_state
);
2129 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2134 if (!bdrv_is_inserted(bs
))
2140 len
= bdrv_getlength(bs
);
2145 if ((offset
> len
) || (len
- offset
< size
))
2151 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2154 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2155 nb_sectors
* BDRV_SECTOR_SIZE
);
2158 typedef struct RwCo
{
2159 BlockDriverState
*bs
;
2167 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2169 RwCo
*rwco
= opaque
;
2171 if (!rwco
->is_write
) {
2172 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
2173 rwco
->nb_sectors
, rwco
->qiov
, 0);
2175 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
2176 rwco
->nb_sectors
, rwco
->qiov
, 0);
2181 * Process a vectored synchronous request using coroutines
2183 static int bdrv_rwv_co(BlockDriverState
*bs
, int64_t sector_num
,
2184 QEMUIOVector
*qiov
, bool is_write
)
2189 .sector_num
= sector_num
,
2190 .nb_sectors
= qiov
->size
>> BDRV_SECTOR_BITS
,
2192 .is_write
= is_write
,
2195 assert((qiov
->size
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2198 * In sync call context, when the vcpu is blocked, this throttling timer
2199 * will not fire; so the I/O throttling function has to be disabled here
2200 * if it has been enabled.
2202 if (bs
->io_limits_enabled
) {
2203 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2204 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2205 bdrv_io_limits_disable(bs
);
2208 if (qemu_in_coroutine()) {
2209 /* Fast-path if already in coroutine context */
2210 bdrv_rw_co_entry(&rwco
);
2212 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2213 qemu_coroutine_enter(co
, &rwco
);
2214 while (rwco
.ret
== NOT_DONE
) {
2222 * Process a synchronous request using coroutines
2224 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2225 int nb_sectors
, bool is_write
)
2228 struct iovec iov
= {
2229 .iov_base
= (void *)buf
,
2230 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2233 qemu_iovec_init_external(&qiov
, &iov
, 1);
2234 return bdrv_rwv_co(bs
, sector_num
, &qiov
, is_write
);
2237 /* return < 0 if error. See bdrv_write() for the return codes */
2238 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2239 uint8_t *buf
, int nb_sectors
)
2241 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false);
2244 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2245 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2246 uint8_t *buf
, int nb_sectors
)
2251 enabled
= bs
->io_limits_enabled
;
2252 bs
->io_limits_enabled
= false;
2253 ret
= bdrv_read(bs
, 0, buf
, 1);
2254 bs
->io_limits_enabled
= enabled
;
2258 /* Return < 0 if error. Important errors are:
2259 -EIO generic I/O error (may happen for all errors)
2260 -ENOMEDIUM No media inserted.
2261 -EINVAL Invalid sector number or nb_sectors
2262 -EACCES Trying to write a read-only device
2264 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2265 const uint8_t *buf
, int nb_sectors
)
2267 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true);
2270 int bdrv_writev(BlockDriverState
*bs
, int64_t sector_num
, QEMUIOVector
*qiov
)
2272 return bdrv_rwv_co(bs
, sector_num
, qiov
, true);
2275 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2276 void *buf
, int count1
)
2278 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2279 int len
, nb_sectors
, count
;
2284 /* first read to align to sector start */
2285 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2288 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2290 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2292 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2300 /* read the sectors "in place" */
2301 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2302 if (nb_sectors
> 0) {
2303 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2305 sector_num
+= nb_sectors
;
2306 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2311 /* add data from the last sector */
2313 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2315 memcpy(buf
, tmp_buf
, count
);
2320 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2322 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2323 int len
, nb_sectors
, count
;
2329 /* first write to align to sector start */
2330 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2333 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2335 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2337 qemu_iovec_to_buf(qiov
, 0, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)),
2339 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2347 /* write the sectors "in place" */
2348 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2349 if (nb_sectors
> 0) {
2350 QEMUIOVector qiov_inplace
;
2352 qemu_iovec_init(&qiov_inplace
, qiov
->niov
);
2353 qemu_iovec_concat(&qiov_inplace
, qiov
, len
,
2354 nb_sectors
<< BDRV_SECTOR_BITS
);
2355 ret
= bdrv_writev(bs
, sector_num
, &qiov_inplace
);
2356 qemu_iovec_destroy(&qiov_inplace
);
2361 sector_num
+= nb_sectors
;
2362 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2366 /* add data from the last sector */
2368 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2370 qemu_iovec_to_buf(qiov
, qiov
->size
- count
, tmp_buf
, count
);
2371 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2377 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2378 const void *buf
, int count1
)
2381 struct iovec iov
= {
2382 .iov_base
= (void *) buf
,
2386 qemu_iovec_init_external(&qiov
, &iov
, 1);
2387 return bdrv_pwritev(bs
, offset
, &qiov
);
2391 * Writes to the file and ensures that no writes are reordered across this
2392 * request (acts as a barrier)
2394 * Returns 0 on success, -errno in error cases.
2396 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2397 const void *buf
, int count
)
2401 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2406 /* No flush needed for cache modes that already do it */
2407 if (bs
->enable_write_cache
) {
2414 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2415 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2417 /* Perform I/O through a temporary buffer so that users who scribble over
2418 * their read buffer while the operation is in progress do not end up
2419 * modifying the image file. This is critical for zero-copy guest I/O
2420 * where anything might happen inside guest memory.
2422 void *bounce_buffer
;
2424 BlockDriver
*drv
= bs
->drv
;
2426 QEMUIOVector bounce_qiov
;
2427 int64_t cluster_sector_num
;
2428 int cluster_nb_sectors
;
2432 /* Cover entire cluster so no additional backing file I/O is required when
2433 * allocating cluster in the image file.
2435 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2436 &cluster_sector_num
, &cluster_nb_sectors
);
2438 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2439 cluster_sector_num
, cluster_nb_sectors
);
2441 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2442 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2443 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2445 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2451 if (drv
->bdrv_co_write_zeroes
&&
2452 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2453 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2454 cluster_nb_sectors
);
2456 /* This does not change the data on the disk, it is not necessary
2457 * to flush even in cache=writethrough mode.
2459 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2464 /* It might be okay to ignore write errors for guest requests. If this
2465 * is a deliberate copy-on-read then we don't want to ignore the error.
2466 * Simply report it in all cases.
2471 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2472 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2473 nb_sectors
* BDRV_SECTOR_SIZE
);
2476 qemu_vfree(bounce_buffer
);
2481 * Handle a read request in coroutine context
2483 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2484 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2485 BdrvRequestFlags flags
)
2487 BlockDriver
*drv
= bs
->drv
;
2488 BdrvTrackedRequest req
;
2494 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2498 /* throttling disk read I/O */
2499 if (bs
->io_limits_enabled
) {
2500 bdrv_io_limits_intercept(bs
, false, nb_sectors
);
2503 if (bs
->copy_on_read
) {
2504 flags
|= BDRV_REQ_COPY_ON_READ
;
2506 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2507 bs
->copy_on_read_in_flight
++;
2510 if (bs
->copy_on_read_in_flight
) {
2511 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2514 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2516 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2519 ret
= bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2524 if (!ret
|| pnum
!= nb_sectors
) {
2525 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2530 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2533 tracked_request_end(&req
);
2535 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2536 bs
->copy_on_read_in_flight
--;
2542 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2543 int nb_sectors
, QEMUIOVector
*qiov
)
2545 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2547 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2550 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2551 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2553 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2555 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2556 BDRV_REQ_COPY_ON_READ
);
2559 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2560 int64_t sector_num
, int nb_sectors
)
2562 BlockDriver
*drv
= bs
->drv
;
2567 /* TODO Emulate only part of misaligned requests instead of letting block
2568 * drivers return -ENOTSUP and emulate everything */
2570 /* First try the efficient write zeroes operation */
2571 if (drv
->bdrv_co_write_zeroes
) {
2572 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2573 if (ret
!= -ENOTSUP
) {
2578 /* Fall back to bounce buffer if write zeroes is unsupported */
2579 iov
.iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
;
2580 iov
.iov_base
= qemu_blockalign(bs
, iov
.iov_len
);
2581 memset(iov
.iov_base
, 0, iov
.iov_len
);
2582 qemu_iovec_init_external(&qiov
, &iov
, 1);
2584 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, &qiov
);
2586 qemu_vfree(iov
.iov_base
);
2591 * Handle a write request in coroutine context
2593 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2594 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2595 BdrvRequestFlags flags
)
2597 BlockDriver
*drv
= bs
->drv
;
2598 BdrvTrackedRequest req
;
2604 if (bs
->read_only
) {
2607 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2611 /* throttling disk write I/O */
2612 if (bs
->io_limits_enabled
) {
2613 bdrv_io_limits_intercept(bs
, true, nb_sectors
);
2616 if (bs
->copy_on_read_in_flight
) {
2617 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2620 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2622 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, &req
);
2625 /* Do nothing, write notifier decided to fail this request */
2626 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
2627 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
);
2629 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2632 if (ret
== 0 && !bs
->enable_write_cache
) {
2633 ret
= bdrv_co_flush(bs
);
2636 if (bs
->dirty_bitmap
) {
2637 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2640 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2641 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2644 tracked_request_end(&req
);
2649 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2650 int nb_sectors
, QEMUIOVector
*qiov
)
2652 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2654 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2657 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2658 int64_t sector_num
, int nb_sectors
)
2660 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2662 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2663 BDRV_REQ_ZERO_WRITE
);
2667 * Truncate file to 'offset' bytes (needed only for file protocols)
2669 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2671 BlockDriver
*drv
= bs
->drv
;
2675 if (!drv
->bdrv_truncate
)
2679 if (bdrv_in_use(bs
))
2681 ret
= drv
->bdrv_truncate(bs
, offset
);
2683 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2684 bdrv_dev_resize_cb(bs
);
2690 * Length of a allocated file in bytes. Sparse files are counted by actual
2691 * allocated space. Return < 0 if error or unknown.
2693 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2695 BlockDriver
*drv
= bs
->drv
;
2699 if (drv
->bdrv_get_allocated_file_size
) {
2700 return drv
->bdrv_get_allocated_file_size(bs
);
2703 return bdrv_get_allocated_file_size(bs
->file
);
2709 * Length of a file in bytes. Return < 0 if error or unknown.
2711 int64_t bdrv_getlength(BlockDriverState
*bs
)
2713 BlockDriver
*drv
= bs
->drv
;
2717 if (bs
->growable
|| bdrv_dev_has_removable_media(bs
)) {
2718 if (drv
->bdrv_getlength
) {
2719 return drv
->bdrv_getlength(bs
);
2722 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2725 /* return 0 as number of sectors if no device present or error */
2726 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2729 length
= bdrv_getlength(bs
);
2733 length
= length
>> BDRV_SECTOR_BITS
;
2734 *nb_sectors_ptr
= length
;
2737 /* throttling disk io limits */
2738 void bdrv_set_io_limits(BlockDriverState
*bs
,
2739 BlockIOLimit
*io_limits
)
2741 bs
->io_limits
= *io_limits
;
2742 bs
->io_limits_enabled
= bdrv_io_limits_enabled(bs
);
2745 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2746 BlockdevOnError on_write_error
)
2748 bs
->on_read_error
= on_read_error
;
2749 bs
->on_write_error
= on_write_error
;
2752 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2754 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2757 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2759 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2762 case BLOCKDEV_ON_ERROR_ENOSPC
:
2763 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2764 case BLOCKDEV_ON_ERROR_STOP
:
2765 return BDRV_ACTION_STOP
;
2766 case BLOCKDEV_ON_ERROR_REPORT
:
2767 return BDRV_ACTION_REPORT
;
2768 case BLOCKDEV_ON_ERROR_IGNORE
:
2769 return BDRV_ACTION_IGNORE
;
2775 /* This is done by device models because, while the block layer knows
2776 * about the error, it does not know whether an operation comes from
2777 * the device or the block layer (from a job, for example).
2779 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
2780 bool is_read
, int error
)
2783 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
2784 if (action
== BDRV_ACTION_STOP
) {
2785 vm_stop(RUN_STATE_IO_ERROR
);
2786 bdrv_iostatus_set_err(bs
, error
);
2790 int bdrv_is_read_only(BlockDriverState
*bs
)
2792 return bs
->read_only
;
2795 int bdrv_is_sg(BlockDriverState
*bs
)
2800 int bdrv_enable_write_cache(BlockDriverState
*bs
)
2802 return bs
->enable_write_cache
;
2805 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
2807 bs
->enable_write_cache
= wce
;
2809 /* so a reopen() will preserve wce */
2811 bs
->open_flags
|= BDRV_O_CACHE_WB
;
2813 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
2817 int bdrv_is_encrypted(BlockDriverState
*bs
)
2819 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
2821 return bs
->encrypted
;
2824 int bdrv_key_required(BlockDriverState
*bs
)
2826 BlockDriverState
*backing_hd
= bs
->backing_hd
;
2828 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
2830 return (bs
->encrypted
&& !bs
->valid_key
);
2833 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
2836 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
2837 ret
= bdrv_set_key(bs
->backing_hd
, key
);
2843 if (!bs
->encrypted
) {
2845 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
2848 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
2851 } else if (!bs
->valid_key
) {
2853 /* call the change callback now, we skipped it on open */
2854 bdrv_dev_change_media_cb(bs
, true);
2859 const char *bdrv_get_format_name(BlockDriverState
*bs
)
2861 return bs
->drv
? bs
->drv
->format_name
: NULL
;
2864 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
2869 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
2870 it(opaque
, drv
->format_name
);
2874 BlockDriverState
*bdrv_find(const char *name
)
2876 BlockDriverState
*bs
;
2878 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2879 if (!strcmp(name
, bs
->device_name
)) {
2886 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
2889 return QTAILQ_FIRST(&bdrv_states
);
2891 return QTAILQ_NEXT(bs
, list
);
2894 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
2896 BlockDriverState
*bs
;
2898 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2903 const char *bdrv_get_device_name(BlockDriverState
*bs
)
2905 return bs
->device_name
;
2908 int bdrv_get_flags(BlockDriverState
*bs
)
2910 return bs
->open_flags
;
2913 int bdrv_flush_all(void)
2915 BlockDriverState
*bs
;
2918 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2919 int ret
= bdrv_flush(bs
);
2920 if (ret
< 0 && !result
) {
2928 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
2933 int bdrv_has_zero_init(BlockDriverState
*bs
)
2937 if (bs
->drv
->bdrv_has_zero_init
) {
2938 return bs
->drv
->bdrv_has_zero_init(bs
);
2945 typedef struct BdrvCoIsAllocatedData
{
2946 BlockDriverState
*bs
;
2947 BlockDriverState
*base
;
2953 } BdrvCoIsAllocatedData
;
2956 * Returns true iff the specified sector is present in the disk image. Drivers
2957 * not implementing the functionality are assumed to not support backing files,
2958 * hence all their sectors are reported as allocated.
2960 * If 'sector_num' is beyond the end of the disk image the return value is 0
2961 * and 'pnum' is set to 0.
2963 * 'pnum' is set to the number of sectors (including and immediately following
2964 * the specified sector) that are known to be in the same
2965 * allocated/unallocated state.
2967 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2968 * beyond the end of the disk image it will be clamped.
2970 int coroutine_fn
bdrv_co_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
2971 int nb_sectors
, int *pnum
)
2975 if (sector_num
>= bs
->total_sectors
) {
2980 n
= bs
->total_sectors
- sector_num
;
2981 if (n
< nb_sectors
) {
2985 if (!bs
->drv
->bdrv_co_is_allocated
) {
2990 return bs
->drv
->bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, pnum
);
2993 /* Coroutine wrapper for bdrv_is_allocated() */
2994 static void coroutine_fn
bdrv_is_allocated_co_entry(void *opaque
)
2996 BdrvCoIsAllocatedData
*data
= opaque
;
2997 BlockDriverState
*bs
= data
->bs
;
2999 data
->ret
= bdrv_co_is_allocated(bs
, data
->sector_num
, data
->nb_sectors
,
3005 * Synchronous wrapper around bdrv_co_is_allocated().
3007 * See bdrv_co_is_allocated() for details.
3009 int bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
,
3013 BdrvCoIsAllocatedData data
= {
3015 .sector_num
= sector_num
,
3016 .nb_sectors
= nb_sectors
,
3021 co
= qemu_coroutine_create(bdrv_is_allocated_co_entry
);
3022 qemu_coroutine_enter(co
, &data
);
3023 while (!data
.done
) {
3030 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3032 * Return true if the given sector is allocated in any image between
3033 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3034 * sector is allocated in any image of the chain. Return false otherwise.
3036 * 'pnum' is set to the number of sectors (including and immediately following
3037 * the specified sector) that are known to be in the same
3038 * allocated/unallocated state.
3041 int coroutine_fn
bdrv_co_is_allocated_above(BlockDriverState
*top
,
3042 BlockDriverState
*base
,
3044 int nb_sectors
, int *pnum
)
3046 BlockDriverState
*intermediate
;
3047 int ret
, n
= nb_sectors
;
3050 while (intermediate
&& intermediate
!= base
) {
3052 ret
= bdrv_co_is_allocated(intermediate
, sector_num
, nb_sectors
,
3062 * [sector_num, nb_sectors] is unallocated on top but intermediate
3065 * [sector_num+x, nr_sectors] allocated.
3067 if (n
> pnum_inter
&&
3068 (intermediate
== top
||
3069 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
3073 intermediate
= intermediate
->backing_hd
;
3080 /* Coroutine wrapper for bdrv_is_allocated_above() */
3081 static void coroutine_fn
bdrv_is_allocated_above_co_entry(void *opaque
)
3083 BdrvCoIsAllocatedData
*data
= opaque
;
3084 BlockDriverState
*top
= data
->bs
;
3085 BlockDriverState
*base
= data
->base
;
3087 data
->ret
= bdrv_co_is_allocated_above(top
, base
, data
->sector_num
,
3088 data
->nb_sectors
, data
->pnum
);
3093 * Synchronous wrapper around bdrv_co_is_allocated_above().
3095 * See bdrv_co_is_allocated_above() for details.
3097 int bdrv_is_allocated_above(BlockDriverState
*top
, BlockDriverState
*base
,
3098 int64_t sector_num
, int nb_sectors
, int *pnum
)
3101 BdrvCoIsAllocatedData data
= {
3104 .sector_num
= sector_num
,
3105 .nb_sectors
= nb_sectors
,
3110 co
= qemu_coroutine_create(bdrv_is_allocated_above_co_entry
);
3111 qemu_coroutine_enter(co
, &data
);
3112 while (!data
.done
) {
3118 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
3120 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3121 return bs
->backing_file
;
3122 else if (bs
->encrypted
)
3123 return bs
->filename
;
3128 void bdrv_get_backing_filename(BlockDriverState
*bs
,
3129 char *filename
, int filename_size
)
3131 pstrcpy(filename
, filename_size
, bs
->backing_file
);
3134 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
3135 const uint8_t *buf
, int nb_sectors
)
3137 BlockDriver
*drv
= bs
->drv
;
3140 if (!drv
->bdrv_write_compressed
)
3142 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3145 assert(!bs
->dirty_bitmap
);
3147 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3150 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3152 BlockDriver
*drv
= bs
->drv
;
3155 if (!drv
->bdrv_get_info
)
3157 memset(bdi
, 0, sizeof(*bdi
));
3158 return drv
->bdrv_get_info(bs
, bdi
);
3161 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3162 int64_t pos
, int size
)
3165 struct iovec iov
= {
3166 .iov_base
= (void *) buf
,
3170 qemu_iovec_init_external(&qiov
, &iov
, 1);
3171 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
3174 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
3176 BlockDriver
*drv
= bs
->drv
;
3180 } else if (drv
->bdrv_save_vmstate
) {
3181 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
3182 } else if (bs
->file
) {
3183 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
3189 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3190 int64_t pos
, int size
)
3192 BlockDriver
*drv
= bs
->drv
;
3195 if (drv
->bdrv_load_vmstate
)
3196 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3198 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3202 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3204 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
3208 bs
->drv
->bdrv_debug_event(bs
, event
);
3211 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3214 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3218 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3219 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3225 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3227 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3231 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3232 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3238 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3240 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3244 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3245 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3251 int bdrv_is_snapshot(BlockDriverState
*bs
)
3253 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3256 /* backing_file can either be relative, or absolute, or a protocol. If it is
3257 * relative, it must be relative to the chain. So, passing in bs->filename
3258 * from a BDS as backing_file should not be done, as that may be relative to
3259 * the CWD rather than the chain. */
3260 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3261 const char *backing_file
)
3263 char *filename_full
= NULL
;
3264 char *backing_file_full
= NULL
;
3265 char *filename_tmp
= NULL
;
3266 int is_protocol
= 0;
3267 BlockDriverState
*curr_bs
= NULL
;
3268 BlockDriverState
*retval
= NULL
;
3270 if (!bs
|| !bs
->drv
|| !backing_file
) {
3274 filename_full
= g_malloc(PATH_MAX
);
3275 backing_file_full
= g_malloc(PATH_MAX
);
3276 filename_tmp
= g_malloc(PATH_MAX
);
3278 is_protocol
= path_has_protocol(backing_file
);
3280 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3282 /* If either of the filename paths is actually a protocol, then
3283 * compare unmodified paths; otherwise make paths relative */
3284 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3285 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3286 retval
= curr_bs
->backing_hd
;
3290 /* If not an absolute filename path, make it relative to the current
3291 * image's filename path */
3292 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3295 /* We are going to compare absolute pathnames */
3296 if (!realpath(filename_tmp
, filename_full
)) {
3300 /* We need to make sure the backing filename we are comparing against
3301 * is relative to the current image filename (or absolute) */
3302 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3303 curr_bs
->backing_file
);
3305 if (!realpath(filename_tmp
, backing_file_full
)) {
3309 if (strcmp(backing_file_full
, filename_full
) == 0) {
3310 retval
= curr_bs
->backing_hd
;
3316 g_free(filename_full
);
3317 g_free(backing_file_full
);
3318 g_free(filename_tmp
);
3322 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3328 if (!bs
->backing_hd
) {
3332 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3335 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3337 BlockDriverState
*curr_bs
= NULL
;
3345 while (curr_bs
->backing_hd
) {
3346 curr_bs
= curr_bs
->backing_hd
;
3351 /**************************************************************/
3354 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3355 QEMUIOVector
*qiov
, int nb_sectors
,
3356 BlockDriverCompletionFunc
*cb
, void *opaque
)
3358 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3360 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3364 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3365 QEMUIOVector
*qiov
, int nb_sectors
,
3366 BlockDriverCompletionFunc
*cb
, void *opaque
)
3368 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3370 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3375 typedef struct MultiwriteCB
{
3380 BlockDriverCompletionFunc
*cb
;
3382 QEMUIOVector
*free_qiov
;
3386 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3390 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3391 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3392 if (mcb
->callbacks
[i
].free_qiov
) {
3393 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3395 g_free(mcb
->callbacks
[i
].free_qiov
);
3399 static void multiwrite_cb(void *opaque
, int ret
)
3401 MultiwriteCB
*mcb
= opaque
;
3403 trace_multiwrite_cb(mcb
, ret
);
3405 if (ret
< 0 && !mcb
->error
) {
3409 mcb
->num_requests
--;
3410 if (mcb
->num_requests
== 0) {
3411 multiwrite_user_cb(mcb
);
3416 static int multiwrite_req_compare(const void *a
, const void *b
)
3418 const BlockRequest
*req1
= a
, *req2
= b
;
3421 * Note that we can't simply subtract req2->sector from req1->sector
3422 * here as that could overflow the return value.
3424 if (req1
->sector
> req2
->sector
) {
3426 } else if (req1
->sector
< req2
->sector
) {
3434 * Takes a bunch of requests and tries to merge them. Returns the number of
3435 * requests that remain after merging.
3437 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3438 int num_reqs
, MultiwriteCB
*mcb
)
3442 // Sort requests by start sector
3443 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3445 // Check if adjacent requests touch the same clusters. If so, combine them,
3446 // filling up gaps with zero sectors.
3448 for (i
= 1; i
< num_reqs
; i
++) {
3450 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3452 // Handle exactly sequential writes and overlapping writes.
3453 if (reqs
[i
].sector
<= oldreq_last
) {
3457 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3463 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3464 qemu_iovec_init(qiov
,
3465 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3467 // Add the first request to the merged one. If the requests are
3468 // overlapping, drop the last sectors of the first request.
3469 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3470 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3472 // We should need to add any zeros between the two requests
3473 assert (reqs
[i
].sector
<= oldreq_last
);
3475 // Add the second request
3476 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3478 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3479 reqs
[outidx
].qiov
= qiov
;
3481 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3484 reqs
[outidx
].sector
= reqs
[i
].sector
;
3485 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3486 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3494 * Submit multiple AIO write requests at once.
3496 * On success, the function returns 0 and all requests in the reqs array have
3497 * been submitted. In error case this function returns -1, and any of the
3498 * requests may or may not be submitted yet. In particular, this means that the
3499 * callback will be called for some of the requests, for others it won't. The
3500 * caller must check the error field of the BlockRequest to wait for the right
3501 * callbacks (if error != 0, no callback will be called).
3503 * The implementation may modify the contents of the reqs array, e.g. to merge
3504 * requests. However, the fields opaque and error are left unmodified as they
3505 * are used to signal failure for a single request to the caller.
3507 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3512 /* don't submit writes if we don't have a medium */
3513 if (bs
->drv
== NULL
) {
3514 for (i
= 0; i
< num_reqs
; i
++) {
3515 reqs
[i
].error
= -ENOMEDIUM
;
3520 if (num_reqs
== 0) {
3524 // Create MultiwriteCB structure
3525 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3526 mcb
->num_requests
= 0;
3527 mcb
->num_callbacks
= num_reqs
;
3529 for (i
= 0; i
< num_reqs
; i
++) {
3530 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3531 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3534 // Check for mergable requests
3535 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3537 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3539 /* Run the aio requests. */
3540 mcb
->num_requests
= num_reqs
;
3541 for (i
= 0; i
< num_reqs
; i
++) {
3542 bdrv_aio_writev(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3543 reqs
[i
].nb_sectors
, multiwrite_cb
, mcb
);
3549 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3551 acb
->aiocb_info
->cancel(acb
);
3554 /* block I/O throttling */
3555 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
3556 bool is_write
, double elapsed_time
, uint64_t *wait
)
3558 uint64_t bps_limit
= 0;
3560 double bytes_limit
, bytes_base
, bytes_res
;
3561 double slice_time
, wait_time
;
3563 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3564 bps_limit
= bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
3565 } else if (bs
->io_limits
.bps
[is_write
]) {
3566 bps_limit
= bs
->io_limits
.bps
[is_write
];
3575 slice_time
= bs
->slice_end
- bs
->slice_start
;
3576 slice_time
/= (NANOSECONDS_PER_SECOND
);
3577 bytes_limit
= bps_limit
* slice_time
;
3578 bytes_base
= bs
->slice_submitted
.bytes
[is_write
];
3579 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3580 bytes_base
+= bs
->slice_submitted
.bytes
[!is_write
];
3583 /* bytes_base: the bytes of data which have been read/written; and
3584 * it is obtained from the history statistic info.
3585 * bytes_res: the remaining bytes of data which need to be read/written.
3586 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3587 * the total time for completing reading/writting all data.
3589 bytes_res
= (unsigned) nb_sectors
* BDRV_SECTOR_SIZE
;
3591 if (bytes_base
+ bytes_res
<= bytes_limit
) {
3599 /* Calc approx time to dispatch */
3600 wait_time
= (bytes_base
+ bytes_res
) / bps_limit
- elapsed_time
;
3602 /* When the I/O rate at runtime exceeds the limits,
3603 * bs->slice_end need to be extended in order that the current statistic
3604 * info can be kept until the timer fire, so it is increased and tuned
3605 * based on the result of experiment.
3607 extension
= wait_time
* NANOSECONDS_PER_SECOND
;
3608 extension
= DIV_ROUND_UP(extension
, BLOCK_IO_SLICE_TIME
) *
3609 BLOCK_IO_SLICE_TIME
;
3610 bs
->slice_end
+= extension
;
3612 *wait
= wait_time
* NANOSECONDS_PER_SECOND
;
3618 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
3619 double elapsed_time
, uint64_t *wait
)
3621 uint64_t iops_limit
= 0;
3622 double ios_limit
, ios_base
;
3623 double slice_time
, wait_time
;
3625 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3626 iops_limit
= bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
3627 } else if (bs
->io_limits
.iops
[is_write
]) {
3628 iops_limit
= bs
->io_limits
.iops
[is_write
];
3637 slice_time
= bs
->slice_end
- bs
->slice_start
;
3638 slice_time
/= (NANOSECONDS_PER_SECOND
);
3639 ios_limit
= iops_limit
* slice_time
;
3640 ios_base
= bs
->slice_submitted
.ios
[is_write
];
3641 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3642 ios_base
+= bs
->slice_submitted
.ios
[!is_write
];
3645 if (ios_base
+ 1 <= ios_limit
) {
3653 /* Calc approx time to dispatch, in seconds */
3654 wait_time
= (ios_base
+ 1) / iops_limit
;
3655 if (wait_time
> elapsed_time
) {
3656 wait_time
= wait_time
- elapsed_time
;
3661 /* Exceeded current slice, extend it by another slice time */
3662 bs
->slice_end
+= BLOCK_IO_SLICE_TIME
;
3664 *wait
= wait_time
* NANOSECONDS_PER_SECOND
;
3670 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
3671 bool is_write
, int64_t *wait
)
3673 int64_t now
, max_wait
;
3674 uint64_t bps_wait
= 0, iops_wait
= 0;
3675 double elapsed_time
;
3676 int bps_ret
, iops_ret
;
3678 now
= qemu_get_clock_ns(vm_clock
);
3679 if (now
> bs
->slice_end
) {
3680 bs
->slice_start
= now
;
3681 bs
->slice_end
= now
+ BLOCK_IO_SLICE_TIME
;
3682 memset(&bs
->slice_submitted
, 0, sizeof(bs
->slice_submitted
));
3685 elapsed_time
= now
- bs
->slice_start
;
3686 elapsed_time
/= (NANOSECONDS_PER_SECOND
);
3688 bps_ret
= bdrv_exceed_bps_limits(bs
, nb_sectors
,
3689 is_write
, elapsed_time
, &bps_wait
);
3690 iops_ret
= bdrv_exceed_iops_limits(bs
, is_write
,
3691 elapsed_time
, &iops_wait
);
3692 if (bps_ret
|| iops_ret
) {
3693 max_wait
= bps_wait
> iops_wait
? bps_wait
: iops_wait
;
3698 now
= qemu_get_clock_ns(vm_clock
);
3699 if (bs
->slice_end
< now
+ max_wait
) {
3700 bs
->slice_end
= now
+ max_wait
;
3710 bs
->slice_submitted
.bytes
[is_write
] += (int64_t)nb_sectors
*
3712 bs
->slice_submitted
.ios
[is_write
]++;
3717 /**************************************************************/
3718 /* async block device emulation */
3720 typedef struct BlockDriverAIOCBSync
{
3721 BlockDriverAIOCB common
;
3724 /* vector translation state */
3728 } BlockDriverAIOCBSync
;
3730 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3732 BlockDriverAIOCBSync
*acb
=
3733 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3734 qemu_bh_delete(acb
->bh
);
3736 qemu_aio_release(acb
);
3739 static const AIOCBInfo bdrv_em_aiocb_info
= {
3740 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3741 .cancel
= bdrv_aio_cancel_em
,
3744 static void bdrv_aio_bh_cb(void *opaque
)
3746 BlockDriverAIOCBSync
*acb
= opaque
;
3749 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3750 qemu_vfree(acb
->bounce
);
3751 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3752 qemu_bh_delete(acb
->bh
);
3754 qemu_aio_release(acb
);
3757 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3761 BlockDriverCompletionFunc
*cb
,
3766 BlockDriverAIOCBSync
*acb
;
3768 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3769 acb
->is_write
= is_write
;
3771 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3772 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3775 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3776 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3778 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3781 qemu_bh_schedule(acb
->bh
);
3783 return &acb
->common
;
3786 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3787 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3788 BlockDriverCompletionFunc
*cb
, void *opaque
)
3790 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3793 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3794 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3795 BlockDriverCompletionFunc
*cb
, void *opaque
)
3797 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3801 typedef struct BlockDriverAIOCBCoroutine
{
3802 BlockDriverAIOCB common
;
3807 } BlockDriverAIOCBCoroutine
;
3809 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3811 BlockDriverAIOCBCoroutine
*acb
=
3812 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3821 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3822 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3823 .cancel
= bdrv_aio_co_cancel_em
,
3826 static void bdrv_co_em_bh(void *opaque
)
3828 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3830 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
3836 qemu_bh_delete(acb
->bh
);
3837 qemu_aio_release(acb
);
3840 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3841 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
3843 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3844 BlockDriverState
*bs
= acb
->common
.bs
;
3846 if (!acb
->is_write
) {
3847 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
3848 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3850 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
3851 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3854 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3855 qemu_bh_schedule(acb
->bh
);
3858 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
3862 BlockDriverCompletionFunc
*cb
,
3867 BlockDriverAIOCBCoroutine
*acb
;
3869 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3870 acb
->req
.sector
= sector_num
;
3871 acb
->req
.nb_sectors
= nb_sectors
;
3872 acb
->req
.qiov
= qiov
;
3873 acb
->is_write
= is_write
;
3876 co
= qemu_coroutine_create(bdrv_co_do_rw
);
3877 qemu_coroutine_enter(co
, acb
);
3879 return &acb
->common
;
3882 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
3884 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3885 BlockDriverState
*bs
= acb
->common
.bs
;
3887 acb
->req
.error
= bdrv_co_flush(bs
);
3888 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3889 qemu_bh_schedule(acb
->bh
);
3892 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
3893 BlockDriverCompletionFunc
*cb
, void *opaque
)
3895 trace_bdrv_aio_flush(bs
, opaque
);
3898 BlockDriverAIOCBCoroutine
*acb
;
3900 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3903 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
3904 qemu_coroutine_enter(co
, acb
);
3906 return &acb
->common
;
3909 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
3911 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3912 BlockDriverState
*bs
= acb
->common
.bs
;
3914 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
3915 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3916 qemu_bh_schedule(acb
->bh
);
3919 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
3920 int64_t sector_num
, int nb_sectors
,
3921 BlockDriverCompletionFunc
*cb
, void *opaque
)
3924 BlockDriverAIOCBCoroutine
*acb
;
3926 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
3928 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3929 acb
->req
.sector
= sector_num
;
3930 acb
->req
.nb_sectors
= nb_sectors
;
3932 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
3933 qemu_coroutine_enter(co
, acb
);
3935 return &acb
->common
;
3938 void bdrv_init(void)
3940 module_call_init(MODULE_INIT_BLOCK
);
3943 void bdrv_init_with_whitelist(void)
3945 use_bdrv_whitelist
= 1;
3949 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
3950 BlockDriverCompletionFunc
*cb
, void *opaque
)
3952 BlockDriverAIOCB
*acb
;
3954 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
3955 acb
->aiocb_info
= aiocb_info
;
3958 acb
->opaque
= opaque
;
3962 void qemu_aio_release(void *p
)
3964 BlockDriverAIOCB
*acb
= p
;
3965 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
3968 /**************************************************************/
3969 /* Coroutine block device emulation */
3971 typedef struct CoroutineIOCompletion
{
3972 Coroutine
*coroutine
;
3974 } CoroutineIOCompletion
;
3976 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
3978 CoroutineIOCompletion
*co
= opaque
;
3981 qemu_coroutine_enter(co
->coroutine
, NULL
);
3984 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
3985 int nb_sectors
, QEMUIOVector
*iov
,
3988 CoroutineIOCompletion co
= {
3989 .coroutine
= qemu_coroutine_self(),
3991 BlockDriverAIOCB
*acb
;
3994 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
3995 bdrv_co_io_em_complete
, &co
);
3997 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
3998 bdrv_co_io_em_complete
, &co
);
4001 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4005 qemu_coroutine_yield();
4010 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4011 int64_t sector_num
, int nb_sectors
,
4014 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4017 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4018 int64_t sector_num
, int nb_sectors
,
4021 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4024 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4026 RwCo
*rwco
= opaque
;
4028 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4031 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4035 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4039 /* Write back cached data to the OS even with cache=unsafe */
4040 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4041 if (bs
->drv
->bdrv_co_flush_to_os
) {
4042 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4048 /* But don't actually force it to the disk with cache=unsafe */
4049 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4053 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4054 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4055 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4056 } else if (bs
->drv
->bdrv_aio_flush
) {
4057 BlockDriverAIOCB
*acb
;
4058 CoroutineIOCompletion co
= {
4059 .coroutine
= qemu_coroutine_self(),
4062 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4066 qemu_coroutine_yield();
4071 * Some block drivers always operate in either writethrough or unsafe
4072 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4073 * know how the server works (because the behaviour is hardcoded or
4074 * depends on server-side configuration), so we can't ensure that
4075 * everything is safe on disk. Returning an error doesn't work because
4076 * that would break guests even if the server operates in writethrough
4079 * Let's hope the user knows what he's doing.
4087 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4088 * in the case of cache=unsafe, so there are no useless flushes.
4091 return bdrv_co_flush(bs
->file
);
4094 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4096 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4097 bs
->drv
->bdrv_invalidate_cache(bs
);
4101 void bdrv_invalidate_cache_all(void)
4103 BlockDriverState
*bs
;
4105 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4106 bdrv_invalidate_cache(bs
);
4110 void bdrv_clear_incoming_migration_all(void)
4112 BlockDriverState
*bs
;
4114 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4115 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4119 int bdrv_flush(BlockDriverState
*bs
)
4127 if (qemu_in_coroutine()) {
4128 /* Fast-path if already in coroutine context */
4129 bdrv_flush_co_entry(&rwco
);
4131 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4132 qemu_coroutine_enter(co
, &rwco
);
4133 while (rwco
.ret
== NOT_DONE
) {
4141 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4143 RwCo
*rwco
= opaque
;
4145 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4148 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4153 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4155 } else if (bs
->read_only
) {
4159 if (bs
->dirty_bitmap
) {
4160 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4163 /* Do nothing if disabled. */
4164 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4168 if (bs
->drv
->bdrv_co_discard
) {
4169 return bs
->drv
->bdrv_co_discard(bs
, sector_num
, nb_sectors
);
4170 } else if (bs
->drv
->bdrv_aio_discard
) {
4171 BlockDriverAIOCB
*acb
;
4172 CoroutineIOCompletion co
= {
4173 .coroutine
= qemu_coroutine_self(),
4176 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4177 bdrv_co_io_em_complete
, &co
);
4181 qemu_coroutine_yield();
4189 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4194 .sector_num
= sector_num
,
4195 .nb_sectors
= nb_sectors
,
4199 if (qemu_in_coroutine()) {
4200 /* Fast-path if already in coroutine context */
4201 bdrv_discard_co_entry(&rwco
);
4203 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4204 qemu_coroutine_enter(co
, &rwco
);
4205 while (rwco
.ret
== NOT_DONE
) {
4213 /**************************************************************/
4214 /* removable device support */
4217 * Return TRUE if the media is present
4219 int bdrv_is_inserted(BlockDriverState
*bs
)
4221 BlockDriver
*drv
= bs
->drv
;
4225 if (!drv
->bdrv_is_inserted
)
4227 return drv
->bdrv_is_inserted(bs
);
4231 * Return whether the media changed since the last call to this
4232 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4234 int bdrv_media_changed(BlockDriverState
*bs
)
4236 BlockDriver
*drv
= bs
->drv
;
4238 if (drv
&& drv
->bdrv_media_changed
) {
4239 return drv
->bdrv_media_changed(bs
);
4245 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4247 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4249 BlockDriver
*drv
= bs
->drv
;
4251 if (drv
&& drv
->bdrv_eject
) {
4252 drv
->bdrv_eject(bs
, eject_flag
);
4255 if (bs
->device_name
[0] != '\0') {
4256 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4261 * Lock or unlock the media (if it is locked, the user won't be able
4262 * to eject it manually).
4264 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4266 BlockDriver
*drv
= bs
->drv
;
4268 trace_bdrv_lock_medium(bs
, locked
);
4270 if (drv
&& drv
->bdrv_lock_medium
) {
4271 drv
->bdrv_lock_medium(bs
, locked
);
4275 /* needed for generic scsi interface */
4277 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4279 BlockDriver
*drv
= bs
->drv
;
4281 if (drv
&& drv
->bdrv_ioctl
)
4282 return drv
->bdrv_ioctl(bs
, req
, buf
);
4286 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4287 unsigned long int req
, void *buf
,
4288 BlockDriverCompletionFunc
*cb
, void *opaque
)
4290 BlockDriver
*drv
= bs
->drv
;
4292 if (drv
&& drv
->bdrv_aio_ioctl
)
4293 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4297 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4299 bs
->buffer_alignment
= align
;
4302 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4304 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4308 * Check if all memory in this vector is sector aligned.
4310 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4314 for (i
= 0; i
< qiov
->niov
; i
++) {
4315 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4323 void bdrv_set_dirty_tracking(BlockDriverState
*bs
, int granularity
)
4325 int64_t bitmap_size
;
4327 assert((granularity
& (granularity
- 1)) == 0);
4330 granularity
>>= BDRV_SECTOR_BITS
;
4331 assert(!bs
->dirty_bitmap
);
4332 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4333 bs
->dirty_bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4335 if (bs
->dirty_bitmap
) {
4336 hbitmap_free(bs
->dirty_bitmap
);
4337 bs
->dirty_bitmap
= NULL
;
4342 int bdrv_get_dirty(BlockDriverState
*bs
, int64_t sector
)
4344 if (bs
->dirty_bitmap
) {
4345 return hbitmap_get(bs
->dirty_bitmap
, sector
);
4351 void bdrv_dirty_iter_init(BlockDriverState
*bs
, HBitmapIter
*hbi
)
4353 hbitmap_iter_init(hbi
, bs
->dirty_bitmap
, 0);
4356 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4359 hbitmap_set(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4362 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4365 hbitmap_reset(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4368 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
)
4370 if (bs
->dirty_bitmap
) {
4371 return hbitmap_count(bs
->dirty_bitmap
);
4377 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4379 assert(bs
->in_use
!= in_use
);
4380 bs
->in_use
= in_use
;
4383 int bdrv_in_use(BlockDriverState
*bs
)
4388 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4390 bs
->iostatus_enabled
= true;
4391 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4394 /* The I/O status is only enabled if the drive explicitly
4395 * enables it _and_ the VM is configured to stop on errors */
4396 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4398 return (bs
->iostatus_enabled
&&
4399 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4400 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4401 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4404 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4406 bs
->iostatus_enabled
= false;
4409 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4411 if (bdrv_iostatus_is_enabled(bs
)) {
4412 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4414 block_job_iostatus_reset(bs
->job
);
4419 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4421 assert(bdrv_iostatus_is_enabled(bs
));
4422 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4423 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4424 BLOCK_DEVICE_IO_STATUS_FAILED
;
4429 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4430 enum BlockAcctType type
)
4432 assert(type
< BDRV_MAX_IOTYPE
);
4434 cookie
->bytes
= bytes
;
4435 cookie
->start_time_ns
= get_clock();
4436 cookie
->type
= type
;
4440 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4442 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4444 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4445 bs
->nr_ops
[cookie
->type
]++;
4446 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4449 void bdrv_img_create(const char *filename
, const char *fmt
,
4450 const char *base_filename
, const char *base_fmt
,
4451 char *options
, uint64_t img_size
, int flags
,
4452 Error
**errp
, bool quiet
)
4454 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4455 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4456 BlockDriverState
*bs
= NULL
;
4457 BlockDriver
*drv
, *proto_drv
;
4458 BlockDriver
*backing_drv
= NULL
;
4461 /* Find driver and parse its options */
4462 drv
= bdrv_find_format(fmt
);
4464 error_setg(errp
, "Unknown file format '%s'", fmt
);
4468 proto_drv
= bdrv_find_protocol(filename
, true);
4470 error_setg(errp
, "Unknown protocol '%s'", filename
);
4474 create_options
= append_option_parameters(create_options
,
4475 drv
->create_options
);
4476 create_options
= append_option_parameters(create_options
,
4477 proto_drv
->create_options
);
4479 /* Create parameter list with default values */
4480 param
= parse_option_parameters("", create_options
, param
);
4482 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4484 /* Parse -o options */
4486 param
= parse_option_parameters(options
, create_options
, param
);
4487 if (param
== NULL
) {
4488 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4493 if (base_filename
) {
4494 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4496 error_setg(errp
, "Backing file not supported for file format '%s'",
4503 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4504 error_setg(errp
, "Backing file format not supported for file "
4505 "format '%s'", fmt
);
4510 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4511 if (backing_file
&& backing_file
->value
.s
) {
4512 if (!strcmp(filename
, backing_file
->value
.s
)) {
4513 error_setg(errp
, "Error: Trying to create an image with the "
4514 "same filename as the backing file");
4519 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4520 if (backing_fmt
&& backing_fmt
->value
.s
) {
4521 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4523 error_setg(errp
, "Unknown backing file format '%s'",
4524 backing_fmt
->value
.s
);
4529 // The size for the image must always be specified, with one exception:
4530 // If we are using a backing file, we can obtain the size from there
4531 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4532 if (size
&& size
->value
.n
== -1) {
4533 if (backing_file
&& backing_file
->value
.s
) {
4538 /* backing files always opened read-only */
4540 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4544 ret
= bdrv_open(bs
, backing_file
->value
.s
, NULL
, back_flags
,
4547 error_setg_errno(errp
, -ret
, "Could not open '%s'",
4548 backing_file
->value
.s
);
4551 bdrv_get_geometry(bs
, &size
);
4554 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4555 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4557 error_setg(errp
, "Image creation needs a size parameter");
4563 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4564 print_option_parameters(param
);
4567 ret
= bdrv_create(drv
, filename
, param
);
4569 if (ret
== -ENOTSUP
) {
4570 error_setg(errp
,"Formatting or formatting option not supported for "
4571 "file format '%s'", fmt
);
4572 } else if (ret
== -EFBIG
) {
4573 const char *cluster_size_hint
= "";
4574 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
4575 cluster_size_hint
= " (try using a larger cluster size)";
4577 error_setg(errp
, "The image size is too large for file format '%s'%s",
4578 fmt
, cluster_size_hint
);
4580 error_setg(errp
, "%s: error while creating %s: %s", filename
, fmt
,
4586 free_option_parameters(create_options
);
4587 free_option_parameters(param
);
4594 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
4596 /* Currently BlockDriverState always uses the main loop AioContext */
4597 return qemu_get_aio_context();
4600 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
4601 NotifierWithReturn
*notifier
)
4603 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);