hw/microblaze/petalogix_ml605_mmu.c

   1 /*
   2  * Model of Petalogix linux reference design targeting Xilinx Spartan ml605
   3  * board.
   4  *
   5  * Copyright (c) 2011 Michal Simek <monstr@monstr.eu>
   6  * Copyright (c) 2011 PetaLogix
   7  * Copyright (c) 2009 Edgar E. Iglesias.
   8  *
   9  * Permission is hereby granted, free of charge, to any person obtaining a copy
  10  * of this software and associated documentation files (the "Software"), to deal
  11  * in the Software without restriction, including without limitation the rights
  12  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  13  * copies of the Software, and to permit persons to whom the Software is
  14  * furnished to do so, subject to the following conditions:
  15  *
  16  * The above copyright notice and this permission notice shall be included in
  17  * all copies or substantial portions of the Software.
  18  *
  19  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  20  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  21  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  22  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  23  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  24  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  25  * THE SOFTWARE.
  26  */
  27
  28 #include "qemu/osdep.h"
  29 #include "qemu/units.h"
  30 #include "qapi/error.h"
  31 #include "qemu-common.h"
  32 #include "cpu.h"
  33 #include "hw/sysbus.h"
  34 #include "hw/hw.h"
  35 #include "net/net.h"
  36 #include "hw/block/flash.h"
  37 #include "sysemu/sysemu.h"
  38 #include "hw/boards.h"
  39 #include "hw/char/serial.h"
  40 #include "exec/address-spaces.h"
  41 #include "hw/ssi/ssi.h"
  42
  43 #include "boot.h"
  44
  45 #include "hw/stream.h"
  46
  47 #define LMB_BRAM_SIZE  (128 * KiB)
  48 #define FLASH_SIZE     (32 * MiB)
  49
  50 #define BINARY_DEVICE_TREE_FILE "petalogix-ml605.dtb"
  51
  52 #define NUM_SPI_FLASHES 4
  53
  54 #define SPI_BASEADDR 0x40a00000
  55 #define MEMORY_BASEADDR 0x50000000
  56 #define FLASH_BASEADDR 0x86000000
  57 #define INTC_BASEADDR 0x81800000
  58 #define TIMER_BASEADDR 0x83c00000
  59 #define UART16550_BASEADDR 0x83e00000
  60 #define AXIENET_BASEADDR 0x82780000
  61 #define AXIDMA_BASEADDR 0x84600000
  62
  63 #define AXIDMA_IRQ1         0
  64 #define AXIDMA_IRQ0         1
  65 #define TIMER_IRQ           2
  66 #define AXIENET_IRQ         3
  67 #define SPI_IRQ             4
  68 #define UART16550_IRQ       5
  69
  70 static void
  71 petalogix_ml605_init(MachineState *machine)
  72 {
  73     ram_addr_t ram_size = machine->ram_size;
  74     MemoryRegion *address_space_mem = get_system_memory();
  75     DeviceState *dev, *dma, *eth0;
  76     Object *ds, *cs;
  77     MicroBlazeCPU *cpu;
  78     SysBusDevice *busdev;
  79     DriveInfo *dinfo;
  80     int i;
  81     MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
  82     MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
  83     qemu_irq irq[32];
  84
  85     /* init CPUs */
  86     cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
  87     object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
  88     /* Use FPU but don't use floating point conversion and square
  89      * root instructions
  90      */
  91     object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
  92     object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
  93                              &error_abort);
  94     object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
  95     object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
  96
  97     /* Attach emulated BRAM through the LMB.  */
  98     memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
  99                            LMB_BRAM_SIZE, &error_fatal);
 100     memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
 101
 102     memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
 103                            &error_fatal);
 104     memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
 105
 106     dinfo = drive_get(IF_PFLASH, 0, 0);
 107     /* 5th parameter 2 means bank-width
 108      * 10th paremeter 0 means little-endian */
 109     pflash_cfi01_register(FLASH_BASEADDR, "petalogix_ml605.flash", FLASH_SIZE,
 110                           dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
 111                           64 * KiB, 2, 0x89, 0x18, 0x0000, 0x0, 0);
 112
 113
 114     dev = qdev_create(NULL, "xlnx.xps-intc");
 115     qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
 116     qdev_init_nofail(dev);
 117     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
 118     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
 119                        qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
 120     for (i = 0; i < 32; i++) {
 121         irq[i] = qdev_get_gpio_in(dev, i);
 122     }
 123
 124     serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
 125                    irq[UART16550_IRQ], 115200, serial_hd(0),
 126                    DEVICE_LITTLE_ENDIAN);
 127
 128     /* 2 timers at irq 2 @ 100 Mhz.  */
 129     dev = qdev_create(NULL, "xlnx.xps-timer");
 130     qdev_prop_set_uint32(dev, "one-timer-only", 0);
 131     qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
 132     qdev_init_nofail(dev);
 133     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
 134     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
 135
 136     /* axi ethernet and dma initialization. */
 137     qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
 138     eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
 139     dma = qdev_create(NULL, "xlnx.axi-dma");
 140
 141     /* FIXME: attach to the sysbus instead */
 142     object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
 143                               NULL);
 144     object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
 145                               NULL);
 146
 147     ds = object_property_get_link(OBJECT(dma),
 148                                   "axistream-connected-target", NULL);
 149     cs = object_property_get_link(OBJECT(dma),
 150                                   "axistream-control-connected-target", NULL);
 151     qdev_set_nic_properties(eth0, &nd_table[0]);
 152     qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
 153     qdev_prop_set_uint32(eth0, "txmem", 0x1000);
 154     object_property_set_link(OBJECT(eth0), OBJECT(ds),
 155                              "axistream-connected", &error_abort);
 156     object_property_set_link(OBJECT(eth0), OBJECT(cs),
 157                              "axistream-control-connected", &error_abort);
 158     qdev_init_nofail(eth0);
 159     sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
 160     sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
 161
 162     ds = object_property_get_link(OBJECT(eth0),
 163                                   "axistream-connected-target", NULL);
 164     cs = object_property_get_link(OBJECT(eth0),
 165                                   "axistream-control-connected-target", NULL);
 166     qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
 167     object_property_set_link(OBJECT(dma), OBJECT(ds),
 168                              "axistream-connected", &error_abort);
 169     object_property_set_link(OBJECT(dma), OBJECT(cs),
 170                              "axistream-control-connected", &error_abort);
 171     qdev_init_nofail(dma);
 172     sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
 173     sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
 174     sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
 175
 176     {
 177         SSIBus *spi;
 178
 179         dev = qdev_create(NULL, "xlnx.xps-spi");
 180         qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
 181         qdev_init_nofail(dev);
 182         busdev = SYS_BUS_DEVICE(dev);
 183         sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
 184         sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
 185
 186         spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
 187
 188         for (i = 0; i < NUM_SPI_FLASHES; i++) {
 189             DriveInfo *dinfo = drive_get_next(IF_MTD);
 190             qemu_irq cs_line;
 191
 192             dev = ssi_create_slave_no_init(spi, "n25q128");
 193             if (dinfo) {
 194                 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
 195                                     &error_fatal);
 196             }
 197             qdev_init_nofail(dev);
 198
 199             cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
 200             sysbus_connect_irq(busdev, i+1, cs_line);
 201         }
 202     }
 203
 204     /* setup PVR to match kernel settings */
 205     cpu->env.pvr.regs[4] = 0xc56b8000;
 206     cpu->env.pvr.regs[5] = 0xc56be000;
 207     cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
 208
 209     microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
 210                            machine->initrd_filename,
 211                            BINARY_DEVICE_TREE_FILE,
 212                            NULL);
 213
 214 }
 215
 216 static void petalogix_ml605_machine_init(MachineClass *mc)
 217 {
 218     mc->desc = "PetaLogix linux refdesign for xilinx ml605 little endian";
 219     mc->init = petalogix_ml605_init;
 220     mc->is_default = 0;
 221 }
 222
 223 DEFINE_MACHINE("petalogix-ml605", petalogix_ml605_machine_init)