tests/m25p80-test.c

   1 /*
   2  * QTest testcase for the M25P80 Flash (Using the Aspeed SPI
   3  * Controller)
   4  *
   5  * Copyright (C) 2016 IBM Corp.
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25
  26 #include "qemu/osdep.h"
  27 #include "qemu/bswap.h"
  28 #include "libqtest-single.h"
  29
  30 /*
  31  * ASPEED SPI Controller registers
  32  */
  33 #define R_CONF              0x00
  34 #define   CONF_ENABLE_W0       (1 << 16)
  35 #define R_CE_CTRL           0x04
  36 #define   CRTL_EXTENDED0       0  /* 32 bit addressing for SPI */
  37 #define R_CTRL0             0x10
  38 #define   CTRL_CE_STOP_ACTIVE  (1 << 2)
  39 #define   CTRL_READMODE        0x0
  40 #define   CTRL_FREADMODE       0x1
  41 #define   CTRL_WRITEMODE       0x2
  42 #define   CTRL_USERMODE        0x3
  43
  44 #define ASPEED_FMC_BASE    0x1E620000
  45 #define ASPEED_FLASH_BASE  0x20000000
  46
  47 /*
  48  * Flash commands
  49  */
  50 enum {
  51     JEDEC_READ = 0x9f,
  52     BULK_ERASE = 0xc7,
  53     READ = 0x03,
  54     PP = 0x02,
  55     WREN = 0x6,
  56     RESET_ENABLE = 0x66,
  57     RESET_MEMORY = 0x99,
  58     EN_4BYTE_ADDR = 0xB7,
  59     ERASE_SECTOR = 0xd8,
  60 };
  61
  62 #define FLASH_JEDEC         0x20ba19  /* n25q256a */
  63 #define FLASH_SIZE          (32 * 1024 * 1024)
  64
  65 #define PAGE_SIZE           256
  66
  67 /*
  68  * Use an explicit bswap for the values read/wrote to the flash region
  69  * as they are BE and the Aspeed CPU is LE.
  70  */
  71 static inline uint32_t make_be32(uint32_t data)
  72 {
  73     return bswap32(data);
  74 }
  75
  76 static void spi_conf(uint32_t value)
  77 {
  78     uint32_t conf = readl(ASPEED_FMC_BASE + R_CONF);
  79
  80     conf |= value;
  81     writel(ASPEED_FMC_BASE + R_CONF, conf);
  82 }
  83
  84 static void spi_conf_remove(uint32_t value)
  85 {
  86     uint32_t conf = readl(ASPEED_FMC_BASE + R_CONF);
  87
  88     conf &= ~value;
  89     writel(ASPEED_FMC_BASE + R_CONF, conf);
  90 }
  91
  92 static void spi_ce_ctrl(uint32_t value)
  93 {
  94     uint32_t conf = readl(ASPEED_FMC_BASE + R_CE_CTRL);
  95
  96     conf |= value;
  97     writel(ASPEED_FMC_BASE + R_CE_CTRL, conf);
  98 }
  99
 100 static void spi_ctrl_setmode(uint8_t mode, uint8_t cmd)
 101 {
 102     uint32_t ctrl = readl(ASPEED_FMC_BASE + R_CTRL0);
 103     ctrl &= ~(CTRL_USERMODE | 0xff << 16);
 104     ctrl |= mode | (cmd << 16);
 105     writel(ASPEED_FMC_BASE + R_CTRL0, ctrl);
 106 }
 107
 108 static void spi_ctrl_start_user(void)
 109 {
 110     uint32_t ctrl = readl(ASPEED_FMC_BASE + R_CTRL0);
 111
 112     ctrl |= CTRL_USERMODE | CTRL_CE_STOP_ACTIVE;
 113     writel(ASPEED_FMC_BASE + R_CTRL0, ctrl);
 114
 115     ctrl &= ~CTRL_CE_STOP_ACTIVE;
 116     writel(ASPEED_FMC_BASE + R_CTRL0, ctrl);
 117 }
 118
 119 static void spi_ctrl_stop_user(void)
 120 {
 121     uint32_t ctrl = readl(ASPEED_FMC_BASE + R_CTRL0);
 122
 123     ctrl |= CTRL_USERMODE | CTRL_CE_STOP_ACTIVE;
 124     writel(ASPEED_FMC_BASE + R_CTRL0, ctrl);
 125 }
 126
 127 static void flash_reset(void)
 128 {
 129     spi_conf(CONF_ENABLE_W0);
 130
 131     spi_ctrl_start_user();
 132     writeb(ASPEED_FLASH_BASE, RESET_ENABLE);
 133     writeb(ASPEED_FLASH_BASE, RESET_MEMORY);
 134     spi_ctrl_stop_user();
 135
 136     spi_conf_remove(CONF_ENABLE_W0);
 137 }
 138
 139 static void test_read_jedec(void)
 140 {
 141     uint32_t jedec = 0x0;
 142
 143     spi_conf(CONF_ENABLE_W0);
 144
 145     spi_ctrl_start_user();
 146     writeb(ASPEED_FLASH_BASE, JEDEC_READ);
 147     jedec |= readb(ASPEED_FLASH_BASE) << 16;
 148     jedec |= readb(ASPEED_FLASH_BASE) << 8;
 149     jedec |= readb(ASPEED_FLASH_BASE);
 150     spi_ctrl_stop_user();
 151
 152     flash_reset();
 153
 154     g_assert_cmphex(jedec, ==, FLASH_JEDEC);
 155 }
 156
 157 static void read_page(uint32_t addr, uint32_t *page)
 158 {
 159     int i;
 160
 161     spi_ctrl_start_user();
 162
 163     writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR);
 164     writeb(ASPEED_FLASH_BASE, READ);
 165     writel(ASPEED_FLASH_BASE, make_be32(addr));
 166
 167     /* Continuous read are supported */
 168     for (i = 0; i < PAGE_SIZE / 4; i++) {
 169         page[i] = make_be32(readl(ASPEED_FLASH_BASE));
 170     }
 171     spi_ctrl_stop_user();
 172 }
 173
 174 static void read_page_mem(uint32_t addr, uint32_t *page)
 175 {
 176     int i;
 177
 178     /* move out USER mode to use direct reads from the AHB bus */
 179     spi_ctrl_setmode(CTRL_READMODE, READ);
 180
 181     for (i = 0; i < PAGE_SIZE / 4; i++) {
 182         page[i] = make_be32(readl(ASPEED_FLASH_BASE + addr + i * 4));
 183     }
 184 }
 185
 186 static void test_erase_sector(void)
 187 {
 188     uint32_t some_page_addr = 0x600 * PAGE_SIZE;
 189     uint32_t page[PAGE_SIZE / 4];
 190     int i;
 191
 192     spi_conf(CONF_ENABLE_W0);
 193
 194     spi_ctrl_start_user();
 195     writeb(ASPEED_FLASH_BASE, WREN);
 196     writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR);
 197     writeb(ASPEED_FLASH_BASE, ERASE_SECTOR);
 198     writel(ASPEED_FLASH_BASE, make_be32(some_page_addr));
 199     spi_ctrl_stop_user();
 200
 201     /* Previous page should be full of zeroes as backend is not
 202      * initialized */
 203     read_page(some_page_addr - PAGE_SIZE, page);
 204     for (i = 0; i < PAGE_SIZE / 4; i++) {
 205         g_assert_cmphex(page[i], ==, 0x0);
 206     }
 207
 208     /* But this one was erased */
 209     read_page(some_page_addr, page);
 210     for (i = 0; i < PAGE_SIZE / 4; i++) {
 211         g_assert_cmphex(page[i], ==, 0xffffffff);
 212     }
 213
 214     flash_reset();
 215 }
 216
 217 static void test_erase_all(void)
 218 {
 219     uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
 220     uint32_t page[PAGE_SIZE / 4];
 221     int i;
 222
 223     spi_conf(CONF_ENABLE_W0);
 224
 225     /* Check some random page. Should be full of zeroes as backend is
 226      * not initialized */
 227     read_page(some_page_addr, page);
 228     for (i = 0; i < PAGE_SIZE / 4; i++) {
 229         g_assert_cmphex(page[i], ==, 0x0);
 230     }
 231
 232     spi_ctrl_start_user();
 233     writeb(ASPEED_FLASH_BASE, WREN);
 234     writeb(ASPEED_FLASH_BASE, BULK_ERASE);
 235     spi_ctrl_stop_user();
 236
 237     /* Recheck that some random page */
 238     read_page(some_page_addr, page);
 239     for (i = 0; i < PAGE_SIZE / 4; i++) {
 240         g_assert_cmphex(page[i], ==, 0xffffffff);
 241     }
 242
 243     flash_reset();
 244 }
 245
 246 static void test_write_page(void)
 247 {
 248     uint32_t my_page_addr = 0x14000 * PAGE_SIZE; /* beyond 16MB */
 249     uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
 250     uint32_t page[PAGE_SIZE / 4];
 251     int i;
 252
 253     spi_conf(CONF_ENABLE_W0);
 254
 255     spi_ctrl_start_user();
 256     writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR);
 257     writeb(ASPEED_FLASH_BASE, WREN);
 258     writeb(ASPEED_FLASH_BASE, PP);
 259     writel(ASPEED_FLASH_BASE, make_be32(my_page_addr));
 260
 261     /* Fill the page with its own addresses */
 262     for (i = 0; i < PAGE_SIZE / 4; i++) {
 263         writel(ASPEED_FLASH_BASE, make_be32(my_page_addr + i * 4));
 264     }
 265     spi_ctrl_stop_user();
 266
 267     /* Check what was written */
 268     read_page(my_page_addr, page);
 269     for (i = 0; i < PAGE_SIZE / 4; i++) {
 270         g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
 271     }
 272
 273     /* Check some other page. It should be full of 0xff */
 274     read_page(some_page_addr, page);
 275     for (i = 0; i < PAGE_SIZE / 4; i++) {
 276         g_assert_cmphex(page[i], ==, 0xffffffff);
 277     }
 278
 279     flash_reset();
 280 }
 281
 282 static void test_read_page_mem(void)
 283 {
 284     uint32_t my_page_addr = 0x14000 * PAGE_SIZE; /* beyond 16MB */
 285     uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
 286     uint32_t page[PAGE_SIZE / 4];
 287     int i;
 288
 289     /* Enable 4BYTE mode for controller. This is should be strapped by
 290      * HW for CE0 anyhow.
 291      */
 292     spi_ce_ctrl(1 << CRTL_EXTENDED0);
 293
 294     /* Enable 4BYTE mode for flash. */
 295     spi_conf(CONF_ENABLE_W0);
 296     spi_ctrl_start_user();
 297     writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR);
 298     spi_ctrl_stop_user();
 299     spi_conf_remove(CONF_ENABLE_W0);
 300
 301     /* Check what was written */
 302     read_page_mem(my_page_addr, page);
 303     for (i = 0; i < PAGE_SIZE / 4; i++) {
 304         g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
 305     }
 306
 307     /* Check some other page. It should be full of 0xff */
 308     read_page_mem(some_page_addr, page);
 309     for (i = 0; i < PAGE_SIZE / 4; i++) {
 310         g_assert_cmphex(page[i], ==, 0xffffffff);
 311     }
 312
 313     flash_reset();
 314 }
 315
 316 static void test_write_page_mem(void)
 317 {
 318     uint32_t my_page_addr = 0x15000 * PAGE_SIZE;
 319     uint32_t page[PAGE_SIZE / 4];
 320     int i;
 321
 322     /* Enable 4BYTE mode for controller. This is should be strapped by
 323      * HW for CE0 anyhow.
 324      */
 325     spi_ce_ctrl(1 << CRTL_EXTENDED0);
 326
 327     /* Enable 4BYTE mode for flash. */
 328     spi_conf(CONF_ENABLE_W0);
 329     spi_ctrl_start_user();
 330     writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR);
 331     writeb(ASPEED_FLASH_BASE, WREN);
 332     spi_ctrl_stop_user();
 333
 334     /* move out USER mode to use direct writes to the AHB bus */
 335     spi_ctrl_setmode(CTRL_WRITEMODE, PP);
 336
 337     for (i = 0; i < PAGE_SIZE / 4; i++) {
 338         writel(ASPEED_FLASH_BASE + my_page_addr + i * 4,
 339                make_be32(my_page_addr + i * 4));
 340     }
 341
 342     /* Check what was written */
 343     read_page_mem(my_page_addr, page);
 344     for (i = 0; i < PAGE_SIZE / 4; i++) {
 345         g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
 346     }
 347
 348     flash_reset();
 349 }
 350
 351 static char tmp_path[] = "/tmp/qtest.m25p80.XXXXXX";
 352
 353 int main(int argc, char **argv)
 354 {
 355     int ret;
 356     int fd;
 357
 358     g_test_init(&argc, &argv, NULL);
 359
 360     fd = mkstemp(tmp_path);
 361     g_assert(fd >= 0);
 362     ret = ftruncate(fd, FLASH_SIZE);
 363     g_assert(ret == 0);
 364     close(fd);
 365
 366     global_qtest = qtest_initf("-m 256 -machine palmetto-bmc "
 367                                "-drive file=%s,format=raw,if=mtd",
 368                                tmp_path);
 369
 370     qtest_add_func("/m25p80/read_jedec", test_read_jedec);
 371     qtest_add_func("/m25p80/erase_sector", test_erase_sector);
 372     qtest_add_func("/m25p80/erase_all",  test_erase_all);
 373     qtest_add_func("/m25p80/write_page", test_write_page);
 374     qtest_add_func("/m25p80/read_page_mem", test_read_page_mem);
 375     qtest_add_func("/m25p80/write_page_mem", test_write_page_mem);
 376
 377     ret = g_test_run();
 378
 379     qtest_quit(global_qtest);
 380     unlink(tmp_path);
 381     return ret;
 382 }