rtl8139: drop tautologous if (ip) {...} statement (CVE-2015-5165)

[qemu/ar7.git] / hw / vfio / pci.c

/*
 * vfio based device assignment support
 *
 * Copyright Red Hat, Inc. 2012
 *
 * Authors:
 *  Alex Williamson <alex.williamson@redhat.com>
 *
 * This work is licensed under the terms of the GNU GPL, version 2.  See
 * the COPYING file in the top-level directory.
 *
 * Based on qemu-kvm device-assignment:
 *  Adapted for KVM by Qumranet.
 *  Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com)
 *  Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com)
 *  Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com)
 *  Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com)
 *  Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com)
 */

#include <dirent.h>
#include <linux/vfio.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>

#include "config.h"
#include "exec/address-spaces.h"
#include "exec/memory.h"
#include "hw/pci/msi.h"
#include "hw/pci/msix.h"
#include "hw/pci/pci.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "qemu/event_notifier.h"
#include "qemu/queue.h"
#include "qemu/range.h"
#include "sysemu/kvm.h"
#include "sysemu/sysemu.h"
#include "trace.h"
#include "hw/vfio/vfio.h"
#include "hw/vfio/vfio-common.h"

struct VFIOPCIDevice;

typedef struct VFIOQuirk {
    MemoryRegion mem;
    struct VFIOPCIDevice *vdev;
    QLIST_ENTRY(VFIOQuirk) next;
    struct {
        uint32_t base_offset:TARGET_PAGE_BITS;
        uint32_t address_offset:TARGET_PAGE_BITS;
        uint32_t address_size:3;
        uint32_t bar:3;

        uint32_t address_match;
        uint32_t address_mask;

        uint32_t address_val:TARGET_PAGE_BITS;
        uint32_t data_offset:TARGET_PAGE_BITS;
        uint32_t data_size:3;

        uint8_t flags;
        uint8_t read_flags;
        uint8_t write_flags;
    } data;
} VFIOQuirk;

typedef struct VFIOBAR {
    VFIORegion region;
    bool ioport;
    bool mem64;
    QLIST_HEAD(, VFIOQuirk) quirks;
} VFIOBAR;

typedef struct VFIOVGARegion {
    MemoryRegion mem;
    off_t offset;
    int nr;
    QLIST_HEAD(, VFIOQuirk) quirks;
} VFIOVGARegion;

typedef struct VFIOVGA {
    off_t fd_offset;
    int fd;
    VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
} VFIOVGA;

typedef struct VFIOINTx {
    bool pending; /* interrupt pending */
    bool kvm_accel; /* set when QEMU bypass through KVM enabled */
    uint8_t pin; /* which pin to pull for qemu_set_irq */
    EventNotifier interrupt; /* eventfd triggered on interrupt */
    EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
    PCIINTxRoute route; /* routing info for QEMU bypass */
    uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
    QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
} VFIOINTx;

typedef struct VFIOMSIVector {
    /*
     * Two interrupt paths are configured per vector.  The first, is only used
     * for interrupts injected via QEMU.  This is typically the non-accel path,
     * but may also be used when we want QEMU to handle masking and pending
     * bits.  The KVM path bypasses QEMU and is therefore higher performance,
     * but requires masking at the device.  virq is used to track the MSI route
     * through KVM, thus kvm_interrupt is only available when virq is set to a
     * valid (>= 0) value.
     */
    EventNotifier interrupt;
    EventNotifier kvm_interrupt;
    struct VFIOPCIDevice *vdev; /* back pointer to device */
    int virq;
    bool use;
} VFIOMSIVector;

enum {
    VFIO_INT_NONE = 0,
    VFIO_INT_INTx = 1,
    VFIO_INT_MSI  = 2,
    VFIO_INT_MSIX = 3,
};

/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
typedef struct VFIOMSIXInfo {
    uint8_t table_bar;
    uint8_t pba_bar;
    uint16_t entries;
    uint32_t table_offset;
    uint32_t pba_offset;
    MemoryRegion mmap_mem;
    void *mmap;
} VFIOMSIXInfo;

typedef struct VFIOPCIDevice {
    PCIDevice pdev;
    VFIODevice vbasedev;
    VFIOINTx intx;
    unsigned int config_size;
    uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
    off_t config_offset; /* Offset of config space region within device fd */
    unsigned int rom_size;
    off_t rom_offset; /* Offset of ROM region within device fd */
    void *rom;
    int msi_cap_size;
    VFIOMSIVector *msi_vectors;
    VFIOMSIXInfo *msix;
    int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
    int interrupt; /* Current interrupt type */
    VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
    VFIOVGA vga; /* 0xa0000, 0x3b0, 0x3c0 */
    PCIHostDeviceAddress host;
    EventNotifier err_notifier;
    EventNotifier req_notifier;
    int (*resetfn)(struct VFIOPCIDevice *);
    uint32_t features;
#define VFIO_FEATURE_ENABLE_VGA_BIT 0
#define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
#define VFIO_FEATURE_ENABLE_REQ_BIT 1
#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
    int32_t bootindex;
    uint8_t pm_cap;
    bool has_vga;
    bool pci_aer;
    bool req_enabled;
    bool has_flr;
    bool has_pm_reset;
    bool rom_read_failed;
} VFIOPCIDevice;

typedef struct VFIORomBlacklistEntry {
    uint16_t vendor_id;
    uint16_t device_id;
} VFIORomBlacklistEntry;

/*
 * List of device ids/vendor ids for which to disable
 * option rom loading. This avoids the guest hangs during rom
 * execution as noticed with the BCM 57810 card for lack of a
 * more better way to handle such issues.
 * The  user can still override by specifying a romfile or
 * rombar=1.
 * Please see https://bugs.launchpad.net/qemu/+bug/1284874
 * for an analysis of the 57810 card hang. When adding
 * a new vendor id/device id combination below, please also add
 * your card/environment details and information that could
 * help in debugging to the bug tracking this issue
 */
static const VFIORomBlacklistEntry romblacklist[] = {
    /* Broadcom BCM 57810 */
    { 0x14e4, 0x168e }
};

#define MSIX_CAP_LENGTH 12

static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
                                  uint32_t val, int len);
static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);

/*
 * Disabling BAR mmaping can be slow, but toggling it around INTx can
 * also be a huge overhead.  We try to get the best of both worlds by
 * waiting until an interrupt to disable mmaps (subsequent transitions
 * to the same state are effectively no overhead).  If the interrupt has
 * been serviced and the time gap is long enough, we re-enable mmaps for
 * performance.  This works well for things like graphics cards, which
 * may not use their interrupt at all and are penalized to an unusable
 * level by read/write BAR traps.  Other devices, like NICs, have more
 * regular interrupts and see much better latency by staying in non-mmap
 * mode.  We therefore set the default mmap_timeout such that a ping
 * is just enough to keep the mmap disabled.  Users can experiment with
 * other options with the x-intx-mmap-timeout-ms parameter (a value of
 * zero disables the timer).
 */
static void vfio_intx_mmap_enable(void *opaque)
{
    VFIOPCIDevice *vdev = opaque;

    if (vdev->intx.pending) {
        timer_mod(vdev->intx.mmap_timer,
                       qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + vdev->intx.mmap_timeout);
        return;
    }

    vfio_mmap_set_enabled(vdev, true);
}

static void vfio_intx_interrupt(void *opaque)
{
    VFIOPCIDevice *vdev = opaque;

    if (!event_notifier_test_and_clear(&vdev->intx.interrupt)) {
        return;
    }

    trace_vfio_intx_interrupt(vdev->vbasedev.name, 'A' + vdev->intx.pin);

    vdev->intx.pending = true;
    pci_irq_assert(&vdev->pdev);
    vfio_mmap_set_enabled(vdev, false);
    if (vdev->intx.mmap_timeout) {
        timer_mod(vdev->intx.mmap_timer,
                       qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + vdev->intx.mmap_timeout);
    }
}

static void vfio_eoi(VFIODevice *vbasedev)
{
    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);

    if (!vdev->intx.pending) {
        return;
    }

    trace_vfio_eoi(vbasedev->name);

    vdev->intx.pending = false;
    pci_irq_deassert(&vdev->pdev);
    vfio_unmask_single_irqindex(vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
}

static void vfio_enable_intx_kvm(VFIOPCIDevice *vdev)
{
#ifdef CONFIG_KVM
    struct kvm_irqfd irqfd = {
        .fd = event_notifier_get_fd(&vdev->intx.interrupt),
        .gsi = vdev->intx.route.irq,
        .flags = KVM_IRQFD_FLAG_RESAMPLE,
    };
    struct vfio_irq_set *irq_set;
    int ret, argsz;
    int32_t *pfd;

    if (!VFIO_ALLOW_KVM_INTX || !kvm_irqfds_enabled() ||
        vdev->intx.route.mode != PCI_INTX_ENABLED ||
        !kvm_resamplefds_enabled()) {
        return;
    }

    /* Get to a known interrupt state */
    qemu_set_fd_handler(irqfd.fd, NULL, NULL, vdev);
    vfio_mask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
    vdev->intx.pending = false;
    pci_irq_deassert(&vdev->pdev);

    /* Get an eventfd for resample/unmask */
    if (event_notifier_init(&vdev->intx.unmask, 0)) {
        error_report("vfio: Error: event_notifier_init failed eoi");
        goto fail;
    }

    /* KVM triggers it, VFIO listens for it */
    irqfd.resamplefd = event_notifier_get_fd(&vdev->intx.unmask);

    if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
        error_report("vfio: Error: Failed to setup resample irqfd: %m");
        goto fail_irqfd;
    }

    argsz = sizeof(*irq_set) + sizeof(*pfd);

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_UNMASK;
    irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = 1;
    pfd = (int32_t *)&irq_set->data;

    *pfd = irqfd.resamplefd;

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
    g_free(irq_set);
    if (ret) {
        error_report("vfio: Error: Failed to setup INTx unmask fd: %m");
        goto fail_vfio;
    }

    /* Let'em rip */
    vfio_unmask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);

    vdev->intx.kvm_accel = true;

    trace_vfio_enable_intx_kvm(vdev->vbasedev.name);

    return;

fail_vfio:
    irqfd.flags = KVM_IRQFD_FLAG_DEASSIGN;
    kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd);
fail_irqfd:
    event_notifier_cleanup(&vdev->intx.unmask);
fail:
    qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);
    vfio_unmask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
#endif
}

static void vfio_disable_intx_kvm(VFIOPCIDevice *vdev)
{
#ifdef CONFIG_KVM
    struct kvm_irqfd irqfd = {
        .fd = event_notifier_get_fd(&vdev->intx.interrupt),
        .gsi = vdev->intx.route.irq,
        .flags = KVM_IRQFD_FLAG_DEASSIGN,
    };

    if (!vdev->intx.kvm_accel) {
        return;
    }

    /*
     * Get to a known state, hardware masked, QEMU ready to accept new
     * interrupts, QEMU IRQ de-asserted.
     */
    vfio_mask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
    vdev->intx.pending = false;
    pci_irq_deassert(&vdev->pdev);

    /* Tell KVM to stop listening for an INTx irqfd */
    if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
        error_report("vfio: Error: Failed to disable INTx irqfd: %m");
    }

    /* We only need to close the eventfd for VFIO to cleanup the kernel side */
    event_notifier_cleanup(&vdev->intx.unmask);

    /* QEMU starts listening for interrupt events. */
    qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);

    vdev->intx.kvm_accel = false;

    /* If we've missed an event, let it re-fire through QEMU */
    vfio_unmask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);

    trace_vfio_disable_intx_kvm(vdev->vbasedev.name);
#endif
}

static void vfio_update_irq(PCIDevice *pdev)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
    PCIINTxRoute route;

    if (vdev->interrupt != VFIO_INT_INTx) {
        return;
    }

    route = pci_device_route_intx_to_irq(&vdev->pdev, vdev->intx.pin);

    if (!pci_intx_route_changed(&vdev->intx.route, &route)) {
        return; /* Nothing changed */
    }

    trace_vfio_update_irq(vdev->vbasedev.name,
                          vdev->intx.route.irq, route.irq);

    vfio_disable_intx_kvm(vdev);

    vdev->intx.route = route;

    if (route.mode != PCI_INTX_ENABLED) {
        return;
    }

    vfio_enable_intx_kvm(vdev);

    /* Re-enable the interrupt in cased we missed an EOI */
    vfio_eoi(&vdev->vbasedev);
}

static int vfio_enable_intx(VFIOPCIDevice *vdev)
{
    uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1);
    int ret, argsz;
    struct vfio_irq_set *irq_set;
    int32_t *pfd;

    if (!pin) {
        return 0;
    }

    vfio_disable_interrupts(vdev);

    vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */
    pci_config_set_interrupt_pin(vdev->pdev.config, pin);

#ifdef CONFIG_KVM
    /*
     * Only conditional to avoid generating error messages on platforms
     * where we won't actually use the result anyway.
     */
    if (kvm_irqfds_enabled() && kvm_resamplefds_enabled()) {
        vdev->intx.route = pci_device_route_intx_to_irq(&vdev->pdev,
                                                        vdev->intx.pin);
    }
#endif

    ret = event_notifier_init(&vdev->intx.interrupt, 0);
    if (ret) {
        error_report("vfio: Error: event_notifier_init failed");
        return ret;
    }

    argsz = sizeof(*irq_set) + sizeof(*pfd);

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
    irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = 1;
    pfd = (int32_t *)&irq_set->data;

    *pfd = event_notifier_get_fd(&vdev->intx.interrupt);
    qemu_set_fd_handler(*pfd, vfio_intx_interrupt, NULL, vdev);

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
    g_free(irq_set);
    if (ret) {
        error_report("vfio: Error: Failed to setup INTx fd: %m");
        qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
        event_notifier_cleanup(&vdev->intx.interrupt);
        return -errno;
    }

    vfio_enable_intx_kvm(vdev);

    vdev->interrupt = VFIO_INT_INTx;

    trace_vfio_enable_intx(vdev->vbasedev.name);

    return 0;
}

static void vfio_disable_intx(VFIOPCIDevice *vdev)
{
    int fd;

    timer_del(vdev->intx.mmap_timer);
    vfio_disable_intx_kvm(vdev);
    vfio_disable_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
    vdev->intx.pending = false;
    pci_irq_deassert(&vdev->pdev);
    vfio_mmap_set_enabled(vdev, true);

    fd = event_notifier_get_fd(&vdev->intx.interrupt);
    qemu_set_fd_handler(fd, NULL, NULL, vdev);
    event_notifier_cleanup(&vdev->intx.interrupt);

    vdev->interrupt = VFIO_INT_NONE;

    trace_vfio_disable_intx(vdev->vbasedev.name);
}

/*
 * MSI/X
 */
static void vfio_msi_interrupt(void *opaque)
{
    VFIOMSIVector *vector = opaque;
    VFIOPCIDevice *vdev = vector->vdev;
    int nr = vector - vdev->msi_vectors;

    if (!event_notifier_test_and_clear(&vector->interrupt)) {
        return;
    }

#ifdef DEBUG_VFIO
    MSIMessage msg;

    if (vdev->interrupt == VFIO_INT_MSIX) {
        msg = msix_get_message(&vdev->pdev, nr);
    } else if (vdev->interrupt == VFIO_INT_MSI) {
        msg = msi_get_message(&vdev->pdev, nr);
    } else {
        abort();
    }

    trace_vfio_msi_interrupt(vdev->vbasedev.name, nr, msg.address, msg.data);
#endif

    if (vdev->interrupt == VFIO_INT_MSIX) {
        msix_notify(&vdev->pdev, nr);
    } else if (vdev->interrupt == VFIO_INT_MSI) {
        msi_notify(&vdev->pdev, nr);
    } else {
        error_report("vfio: MSI interrupt receieved, but not enabled?");
    }
}

static int vfio_enable_vectors(VFIOPCIDevice *vdev, bool msix)
{
    struct vfio_irq_set *irq_set;
    int ret = 0, i, argsz;
    int32_t *fds;

    argsz = sizeof(*irq_set) + (vdev->nr_vectors * sizeof(*fds));

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
    irq_set->index = msix ? VFIO_PCI_MSIX_IRQ_INDEX : VFIO_PCI_MSI_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = vdev->nr_vectors;
    fds = (int32_t *)&irq_set->data;

    for (i = 0; i < vdev->nr_vectors; i++) {
        int fd = -1;

        /*
         * MSI vs MSI-X - The guest has direct access to MSI mask and pending
         * bits, therefore we always use the KVM signaling path when setup.
         * MSI-X mask and pending bits are emulated, so we want to use the
         * KVM signaling path only when configured and unmasked.
         */
        if (vdev->msi_vectors[i].use) {
            if (vdev->msi_vectors[i].virq < 0 ||
                (msix && msix_is_masked(&vdev->pdev, i))) {
                fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt);
            } else {
                fd = event_notifier_get_fd(&vdev->msi_vectors[i].kvm_interrupt);
            }
        }

        fds[i] = fd;
    }

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);

    g_free(irq_set);

    return ret;
}

static void vfio_add_kvm_msi_virq(VFIOMSIVector *vector, MSIMessage *msg,
                                  bool msix)
{
    int virq;

    if ((msix && !VFIO_ALLOW_KVM_MSIX) ||
        (!msix && !VFIO_ALLOW_KVM_MSI) || !msg) {
        return;
    }

    if (event_notifier_init(&vector->kvm_interrupt, 0)) {
        return;
    }

    virq = kvm_irqchip_add_msi_route(kvm_state, *msg);
    if (virq < 0) {
        event_notifier_cleanup(&vector->kvm_interrupt);
        return;
    }

    if (kvm_irqchip_add_irqfd_notifier_gsi(kvm_state, &vector->kvm_interrupt,
                                       NULL, virq) < 0) {
        kvm_irqchip_release_virq(kvm_state, virq);
        event_notifier_cleanup(&vector->kvm_interrupt);
        return;
    }

    vector->virq = virq;
}

static void vfio_remove_kvm_msi_virq(VFIOMSIVector *vector)
{
    kvm_irqchip_remove_irqfd_notifier_gsi(kvm_state, &vector->kvm_interrupt,
                                          vector->virq);
    kvm_irqchip_release_virq(kvm_state, vector->virq);
    vector->virq = -1;
    event_notifier_cleanup(&vector->kvm_interrupt);
}

static void vfio_update_kvm_msi_virq(VFIOMSIVector *vector, MSIMessage msg)
{
    kvm_irqchip_update_msi_route(kvm_state, vector->virq, msg);
}

static int vfio_msix_vector_do_use(PCIDevice *pdev, unsigned int nr,
                                   MSIMessage *msg, IOHandler *handler)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
    VFIOMSIVector *vector;
    int ret;

    trace_vfio_msix_vector_do_use(vdev->vbasedev.name, nr);

    vector = &vdev->msi_vectors[nr];

    if (!vector->use) {
        vector->vdev = vdev;
        vector->virq = -1;
        if (event_notifier_init(&vector->interrupt, 0)) {
            error_report("vfio: Error: event_notifier_init failed");
        }
        vector->use = true;
        msix_vector_use(pdev, nr);
    }

    qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt),
                        handler, NULL, vector);

    /*
     * Attempt to enable route through KVM irqchip,
     * default to userspace handling if unavailable.
     */
    if (vector->virq >= 0) {
        if (!msg) {
            vfio_remove_kvm_msi_virq(vector);
        } else {
            vfio_update_kvm_msi_virq(vector, *msg);
        }
    } else {
        vfio_add_kvm_msi_virq(vector, msg, true);
    }

    /*
     * We don't want to have the host allocate all possible MSI vectors
     * for a device if they're not in use, so we shutdown and incrementally
     * increase them as needed.
     */
    if (vdev->nr_vectors < nr + 1) {
        vfio_disable_irqindex(&vdev->vbasedev, VFIO_PCI_MSIX_IRQ_INDEX);
        vdev->nr_vectors = nr + 1;
        ret = vfio_enable_vectors(vdev, true);
        if (ret) {
            error_report("vfio: failed to enable vectors, %d", ret);
        }
    } else {
        int argsz;
        struct vfio_irq_set *irq_set;
        int32_t *pfd;

        argsz = sizeof(*irq_set) + sizeof(*pfd);

        irq_set = g_malloc0(argsz);
        irq_set->argsz = argsz;
        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
                         VFIO_IRQ_SET_ACTION_TRIGGER;
        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
        irq_set->start = nr;
        irq_set->count = 1;
        pfd = (int32_t *)&irq_set->data;

        if (vector->virq >= 0) {
            *pfd = event_notifier_get_fd(&vector->kvm_interrupt);
        } else {
            *pfd = event_notifier_get_fd(&vector->interrupt);
        }

        ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
        g_free(irq_set);
        if (ret) {
            error_report("vfio: failed to modify vector, %d", ret);
        }
    }

    return 0;
}

static int vfio_msix_vector_use(PCIDevice *pdev,
                                unsigned int nr, MSIMessage msg)
{
    return vfio_msix_vector_do_use(pdev, nr, &msg, vfio_msi_interrupt);
}

static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
    VFIOMSIVector *vector = &vdev->msi_vectors[nr];

    trace_vfio_msix_vector_release(vdev->vbasedev.name, nr);

    /*
     * There are still old guests that mask and unmask vectors on every
     * interrupt.  If we're using QEMU bypass with a KVM irqfd, leave all of
     * the KVM setup in place, simply switch VFIO to use the non-bypass
     * eventfd.  We'll then fire the interrupt through QEMU and the MSI-X
     * core will mask the interrupt and set pending bits, allowing it to
     * be re-asserted on unmask.  Nothing to do if already using QEMU mode.
     */
    if (vector->virq >= 0) {
        int argsz;
        struct vfio_irq_set *irq_set;
        int32_t *pfd;

        argsz = sizeof(*irq_set) + sizeof(*pfd);

        irq_set = g_malloc0(argsz);
        irq_set->argsz = argsz;
        irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
                         VFIO_IRQ_SET_ACTION_TRIGGER;
        irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
        irq_set->start = nr;
        irq_set->count = 1;
        pfd = (int32_t *)&irq_set->data;

        *pfd = event_notifier_get_fd(&vector->interrupt);

        ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);

        g_free(irq_set);
    }
}

static void vfio_enable_msix(VFIOPCIDevice *vdev)
{
    vfio_disable_interrupts(vdev);

    vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(VFIOMSIVector));

    vdev->interrupt = VFIO_INT_MSIX;

    /*
     * Some communication channels between VF & PF or PF & fw rely on the
     * physical state of the device and expect that enabling MSI-X from the
     * guest enables the same on the host.  When our guest is Linux, the
     * guest driver call to pci_enable_msix() sets the enabling bit in the
     * MSI-X capability, but leaves the vector table masked.  We therefore
     * can't rely on a vector_use callback (from request_irq() in the guest)
     * to switch the physical device into MSI-X mode because that may come a
     * long time after pci_enable_msix().  This code enables vector 0 with
     * triggering to userspace, then immediately release the vector, leaving
     * the physical device with no vectors enabled, but MSI-X enabled, just
     * like the guest view.
     */
    vfio_msix_vector_do_use(&vdev->pdev, 0, NULL, NULL);
    vfio_msix_vector_release(&vdev->pdev, 0);

    if (msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use,
                                  vfio_msix_vector_release, NULL)) {
        error_report("vfio: msix_set_vector_notifiers failed");
    }

    trace_vfio_enable_msix(vdev->vbasedev.name);
}

static void vfio_enable_msi(VFIOPCIDevice *vdev)
{
    int ret, i;

    vfio_disable_interrupts(vdev);

    vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev);
retry:
    vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(VFIOMSIVector));

    for (i = 0; i < vdev->nr_vectors; i++) {
        VFIOMSIVector *vector = &vdev->msi_vectors[i];
        MSIMessage msg = msi_get_message(&vdev->pdev, i);

        vector->vdev = vdev;
        vector->virq = -1;
        vector->use = true;

        if (event_notifier_init(&vector->interrupt, 0)) {
            error_report("vfio: Error: event_notifier_init failed");
        }

        qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt),
                            vfio_msi_interrupt, NULL, vector);

        /*
         * Attempt to enable route through KVM irqchip,
         * default to userspace handling if unavailable.
         */
        vfio_add_kvm_msi_virq(vector, &msg, false);
    }

    /* Set interrupt type prior to possible interrupts */
    vdev->interrupt = VFIO_INT_MSI;

    ret = vfio_enable_vectors(vdev, false);
    if (ret) {
        if (ret < 0) {
            error_report("vfio: Error: Failed to setup MSI fds: %m");
        } else if (ret != vdev->nr_vectors) {
            error_report("vfio: Error: Failed to enable %d "
                         "MSI vectors, retry with %d", vdev->nr_vectors, ret);
        }

        for (i = 0; i < vdev->nr_vectors; i++) {
            VFIOMSIVector *vector = &vdev->msi_vectors[i];
            if (vector->virq >= 0) {
                vfio_remove_kvm_msi_virq(vector);
            }
            qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt),
                                NULL, NULL, NULL);
            event_notifier_cleanup(&vector->interrupt);
        }

        g_free(vdev->msi_vectors);

        if (ret > 0 && ret != vdev->nr_vectors) {
            vdev->nr_vectors = ret;
            goto retry;
        }
        vdev->nr_vectors = 0;

        /*
         * Failing to setup MSI doesn't really fall within any specification.
         * Let's try leaving interrupts disabled and hope the guest figures
         * out to fall back to INTx for this device.
         */
        error_report("vfio: Error: Failed to enable MSI");
        vdev->interrupt = VFIO_INT_NONE;

        return;
    }

    trace_vfio_enable_msi(vdev->vbasedev.name, vdev->nr_vectors);
}

static void vfio_disable_msi_common(VFIOPCIDevice *vdev)
{
    int i;

    for (i = 0; i < vdev->nr_vectors; i++) {
        VFIOMSIVector *vector = &vdev->msi_vectors[i];
        if (vdev->msi_vectors[i].use) {
            if (vector->virq >= 0) {
                vfio_remove_kvm_msi_virq(vector);
            }
            qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt),
                                NULL, NULL, NULL);
            event_notifier_cleanup(&vector->interrupt);
        }
    }

    g_free(vdev->msi_vectors);
    vdev->msi_vectors = NULL;
    vdev->nr_vectors = 0;
    vdev->interrupt = VFIO_INT_NONE;

    vfio_enable_intx(vdev);
}

static void vfio_disable_msix(VFIOPCIDevice *vdev)
{
    int i;

    msix_unset_vector_notifiers(&vdev->pdev);

    /*
     * MSI-X will only release vectors if MSI-X is still enabled on the
     * device, check through the rest and release it ourselves if necessary.
     */
    for (i = 0; i < vdev->nr_vectors; i++) {
        if (vdev->msi_vectors[i].use) {
            vfio_msix_vector_release(&vdev->pdev, i);
            msix_vector_unuse(&vdev->pdev, i);
        }
    }

    if (vdev->nr_vectors) {
        vfio_disable_irqindex(&vdev->vbasedev, VFIO_PCI_MSIX_IRQ_INDEX);
    }

    vfio_disable_msi_common(vdev);

    trace_vfio_disable_msix(vdev->vbasedev.name);
}

static void vfio_disable_msi(VFIOPCIDevice *vdev)
{
    vfio_disable_irqindex(&vdev->vbasedev, VFIO_PCI_MSI_IRQ_INDEX);
    vfio_disable_msi_common(vdev);

    trace_vfio_disable_msi(vdev->vbasedev.name);
}

static void vfio_update_msi(VFIOPCIDevice *vdev)
{
    int i;

    for (i = 0; i < vdev->nr_vectors; i++) {
        VFIOMSIVector *vector = &vdev->msi_vectors[i];
        MSIMessage msg;

        if (!vector->use || vector->virq < 0) {
            continue;
        }

        msg = msi_get_message(&vdev->pdev, i);
        vfio_update_kvm_msi_virq(vector, msg);
    }
}

static void vfio_pci_load_rom(VFIOPCIDevice *vdev)
{
    struct vfio_region_info reg_info = {
        .argsz = sizeof(reg_info),
        .index = VFIO_PCI_ROM_REGION_INDEX
    };
    uint64_t size;
    off_t off = 0;
    ssize_t bytes;

    if (ioctl(vdev->vbasedev.fd, VFIO_DEVICE_GET_REGION_INFO, &reg_info)) {
        error_report("vfio: Error getting ROM info: %m");
        return;
    }

    trace_vfio_pci_load_rom(vdev->vbasedev.name, (unsigned long)reg_info.size,
                            (unsigned long)reg_info.offset,
                            (unsigned long)reg_info.flags);

    vdev->rom_size = size = reg_info.size;
    vdev->rom_offset = reg_info.offset;

    if (!vdev->rom_size) {
        vdev->rom_read_failed = true;
        error_report("vfio-pci: Cannot read device rom at "
                    "%s", vdev->vbasedev.name);
        error_printf("Device option ROM contents are probably invalid "
                    "(check dmesg).\nSkip option ROM probe with rombar=0, "
                    "or load from file with romfile=\n");
        return;
    }

    vdev->rom = g_malloc(size);
    memset(vdev->rom, 0xff, size);

    while (size) {
        bytes = pread(vdev->vbasedev.fd, vdev->rom + off,
                      size, vdev->rom_offset + off);
        if (bytes == 0) {
            break;
        } else if (bytes > 0) {
            off += bytes;
            size -= bytes;
        } else {
            if (errno == EINTR || errno == EAGAIN) {
                continue;
            }
            error_report("vfio: Error reading device ROM: %m");
            break;
        }
    }
}

static uint64_t vfio_rom_read(void *opaque, hwaddr addr, unsigned size)
{
    VFIOPCIDevice *vdev = opaque;
    union {
        uint8_t byte;
        uint16_t word;
        uint32_t dword;
        uint64_t qword;
    } val;
    uint64_t data = 0;

    /* Load the ROM lazily when the guest tries to read it */
    if (unlikely(!vdev->rom && !vdev->rom_read_failed)) {
        vfio_pci_load_rom(vdev);
    }

    memcpy(&val, vdev->rom + addr,
           (addr < vdev->rom_size) ? MIN(size, vdev->rom_size - addr) : 0);

    switch (size) {
    case 1:
        data = val.byte;
        break;
    case 2:
        data = le16_to_cpu(val.word);
        break;
    case 4:
        data = le32_to_cpu(val.dword);
        break;
    default:
        hw_error("vfio: unsupported read size, %d bytes\n", size);
        break;
    }

    trace_vfio_rom_read(vdev->vbasedev.name, addr, size, data);

    return data;
}

static void vfio_rom_write(void *opaque, hwaddr addr,
                           uint64_t data, unsigned size)
{
}

static const MemoryRegionOps vfio_rom_ops = {
    .read = vfio_rom_read,
    .write = vfio_rom_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;
    uint16_t vendor_id, device_id;
    int count = 0;

    vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID);
    device_id = pci_get_word(pdev->config + PCI_DEVICE_ID);

    while (count < ARRAY_SIZE(romblacklist)) {
        if (romblacklist[count].vendor_id == vendor_id &&
            romblacklist[count].device_id == device_id) {
                return true;
        }
        count++;
    }

    return false;
}

static void vfio_pci_size_rom(VFIOPCIDevice *vdev)
{
    uint32_t orig, size = cpu_to_le32((uint32_t)PCI_ROM_ADDRESS_MASK);
    off_t offset = vdev->config_offset + PCI_ROM_ADDRESS;
    DeviceState *dev = DEVICE(vdev);
    char name[32];
    int fd = vdev->vbasedev.fd;

    if (vdev->pdev.romfile || !vdev->pdev.rom_bar) {
        /* Since pci handles romfile, just print a message and return */
        if (vfio_blacklist_opt_rom(vdev) && vdev->pdev.romfile) {
            error_printf("Warning : Device at %04x:%02x:%02x.%x "
                         "is known to cause system instability issues during "
                         "option rom execution. "
                         "Proceeding anyway since user specified romfile\n",
                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
                         vdev->host.function);
        }
        return;
    }

    /*
     * Use the same size ROM BAR as the physical device.  The contents
     * will get filled in later when the guest tries to read it.
     */
    if (pread(fd, &orig, 4, offset) != 4 ||
        pwrite(fd, &size, 4, offset) != 4 ||
        pread(fd, &size, 4, offset) != 4 ||
        pwrite(fd, &orig, 4, offset) != 4) {
        error_report("%s(%04x:%02x:%02x.%x) failed: %m",
                     __func__, vdev->host.domain, vdev->host.bus,
                     vdev->host.slot, vdev->host.function);
        return;
    }

    size = ~(le32_to_cpu(size) & PCI_ROM_ADDRESS_MASK) + 1;

    if (!size) {
        return;
    }

    if (vfio_blacklist_opt_rom(vdev)) {
        if (dev->opts && qemu_opt_get(dev->opts, "rombar")) {
            error_printf("Warning : Device at %04x:%02x:%02x.%x "
                         "is known to cause system instability issues during "
                         "option rom execution. "
                         "Proceeding anyway since user specified non zero value for "
                         "rombar\n",
                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
                         vdev->host.function);
        } else {
            error_printf("Warning : Rom loading for device at "
                         "%04x:%02x:%02x.%x has been disabled due to "
                         "system instability issues. "
                         "Specify rombar=1 or romfile to force\n",
                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
                         vdev->host.function);
            return;
        }
    }

    trace_vfio_pci_size_rom(vdev->vbasedev.name, size);

    snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom",
             vdev->host.domain, vdev->host.bus, vdev->host.slot,
             vdev->host.function);

    memory_region_init_io(&vdev->pdev.rom, OBJECT(vdev),
                          &vfio_rom_ops, vdev, name, size);

    pci_register_bar(&vdev->pdev, PCI_ROM_SLOT,
                     PCI_BASE_ADDRESS_SPACE_MEMORY, &vdev->pdev.rom);

    vdev->pdev.has_rom = true;
    vdev->rom_read_failed = false;
}

static void vfio_vga_write(void *opaque, hwaddr addr,
                           uint64_t data, unsigned size)
{
    VFIOVGARegion *region = opaque;
    VFIOVGA *vga = container_of(region, VFIOVGA, region[region->nr]);
    union {
        uint8_t byte;
        uint16_t word;
        uint32_t dword;
        uint64_t qword;
    } buf;
    off_t offset = vga->fd_offset + region->offset + addr;

    switch (size) {
    case 1:
        buf.byte = data;
        break;
    case 2:
        buf.word = cpu_to_le16(data);
        break;
    case 4:
        buf.dword = cpu_to_le32(data);
        break;
    default:
        hw_error("vfio: unsupported write size, %d bytes", size);
        break;
    }

    if (pwrite(vga->fd, &buf, size, offset) != size) {
        error_report("%s(,0x%"HWADDR_PRIx", 0x%"PRIx64", %d) failed: %m",
                     __func__, region->offset + addr, data, size);
    }

    trace_vfio_vga_write(region->offset + addr, data, size);
}

static uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size)
{
    VFIOVGARegion *region = opaque;
    VFIOVGA *vga = container_of(region, VFIOVGA, region[region->nr]);
    union {
        uint8_t byte;
        uint16_t word;
        uint32_t dword;
        uint64_t qword;
    } buf;
    uint64_t data = 0;
    off_t offset = vga->fd_offset + region->offset + addr;

    if (pread(vga->fd, &buf, size, offset) != size) {
        error_report("%s(,0x%"HWADDR_PRIx", %d) failed: %m",
                     __func__, region->offset + addr, size);
        return (uint64_t)-1;
    }

    switch (size) {
    case 1:
        data = buf.byte;
        break;
    case 2:
        data = le16_to_cpu(buf.word);
        break;
    case 4:
        data = le32_to_cpu(buf.dword);
        break;
    default:
        hw_error("vfio: unsupported read size, %d bytes", size);
        break;
    }

    trace_vfio_vga_read(region->offset + addr, size, data);

    return data;
}

static const MemoryRegionOps vfio_vga_ops = {
    .read = vfio_vga_read,
    .write = vfio_vga_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

/*
 * Device specific quirks
 */

/* Is range1 fully contained within range2?  */
static bool vfio_range_contained(uint64_t first1, uint64_t len1,
                                 uint64_t first2, uint64_t len2) {
    return (first1 >= first2 && first1 + len1 <= first2 + len2);
}

static bool vfio_flags_enabled(uint8_t flags, uint8_t mask)
{
    return (mask && (flags & mask) == mask);
}

static uint64_t vfio_generic_window_quirk_read(void *opaque,
                                               hwaddr addr, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    uint64_t data;

    if (vfio_flags_enabled(quirk->data.flags, quirk->data.read_flags) &&
        ranges_overlap(addr, size,
                       quirk->data.data_offset, quirk->data.data_size)) {
        hwaddr offset = addr - quirk->data.data_offset;

        if (!vfio_range_contained(addr, size, quirk->data.data_offset,
                                  quirk->data.data_size)) {
            hw_error("%s: window data read not fully contained: %s",
                     __func__, memory_region_name(&quirk->mem));
        }

        data = vfio_pci_read_config(&vdev->pdev,
                                    quirk->data.address_val + offset, size);

        trace_vfio_generic_window_quirk_read(memory_region_name(&quirk->mem),
                                             vdev->vbasedev.name,
                                             quirk->data.bar,
                                             addr, size, data);
    } else {
        data = vfio_region_read(&vdev->bars[quirk->data.bar].region,
                                addr + quirk->data.base_offset, size);
    }

    return data;
}

static void vfio_generic_window_quirk_write(void *opaque, hwaddr addr,
                                            uint64_t data, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;

    if (ranges_overlap(addr, size,
                       quirk->data.address_offset, quirk->data.address_size)) {

        if (addr != quirk->data.address_offset) {
            hw_error("%s: offset write into address window: %s",
                     __func__, memory_region_name(&quirk->mem));
        }

        if ((data & ~quirk->data.address_mask) == quirk->data.address_match) {
            quirk->data.flags |= quirk->data.write_flags |
                                 quirk->data.read_flags;
            quirk->data.address_val = data & quirk->data.address_mask;
        } else {
            quirk->data.flags &= ~(quirk->data.write_flags |
                                   quirk->data.read_flags);
        }
    }

    if (vfio_flags_enabled(quirk->data.flags, quirk->data.write_flags) &&
        ranges_overlap(addr, size,
                       quirk->data.data_offset, quirk->data.data_size)) {
        hwaddr offset = addr - quirk->data.data_offset;

        if (!vfio_range_contained(addr, size, quirk->data.data_offset,
                                  quirk->data.data_size)) {
            hw_error("%s: window data write not fully contained: %s",
                     __func__, memory_region_name(&quirk->mem));
        }

        vfio_pci_write_config(&vdev->pdev,
                              quirk->data.address_val + offset, data, size);
        trace_vfio_generic_window_quirk_write(memory_region_name(&quirk->mem),
                                              vdev->vbasedev.name,
                                              quirk->data.bar,
                                              addr, data, size);
        return;
    }

    vfio_region_write(&vdev->bars[quirk->data.bar].region,
                   addr + quirk->data.base_offset, data, size);
}

static const MemoryRegionOps vfio_generic_window_quirk = {
    .read = vfio_generic_window_quirk_read,
    .write = vfio_generic_window_quirk_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static uint64_t vfio_generic_quirk_read(void *opaque,
                                        hwaddr addr, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    hwaddr base = quirk->data.address_match & TARGET_PAGE_MASK;
    hwaddr offset = quirk->data.address_match & ~TARGET_PAGE_MASK;
    uint64_t data;

    if (vfio_flags_enabled(quirk->data.flags, quirk->data.read_flags) &&
        ranges_overlap(addr, size, offset, quirk->data.address_mask + 1)) {
        if (!vfio_range_contained(addr, size, offset,
                                  quirk->data.address_mask + 1)) {
            hw_error("%s: read not fully contained: %s",
                     __func__, memory_region_name(&quirk->mem));
        }

        data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);

        trace_vfio_generic_quirk_read(memory_region_name(&quirk->mem),
                                      vdev->vbasedev.name, quirk->data.bar,
                                      addr + base, size, data);
    } else {
        data = vfio_region_read(&vdev->bars[quirk->data.bar].region,
                                addr + base, size);
    }

    return data;
}

static void vfio_generic_quirk_write(void *opaque, hwaddr addr,
                                     uint64_t data, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    hwaddr base = quirk->data.address_match & TARGET_PAGE_MASK;
    hwaddr offset = quirk->data.address_match & ~TARGET_PAGE_MASK;

    if (vfio_flags_enabled(quirk->data.flags, quirk->data.write_flags) &&
        ranges_overlap(addr, size, offset, quirk->data.address_mask + 1)) {
        if (!vfio_range_contained(addr, size, offset,
                                  quirk->data.address_mask + 1)) {
            hw_error("%s: write not fully contained: %s",
                     __func__, memory_region_name(&quirk->mem));
        }

        vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);

        trace_vfio_generic_quirk_write(memory_region_name(&quirk->mem),
                                       vdev->vbasedev.name, quirk->data.bar,
                                       addr + base, data, size);
    } else {
        vfio_region_write(&vdev->bars[quirk->data.bar].region,
                          addr + base, data, size);
    }
}

static const MemoryRegionOps vfio_generic_quirk = {
    .read = vfio_generic_quirk_read,
    .write = vfio_generic_quirk_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

#define PCI_VENDOR_ID_ATI               0x1002

/*
 * Radeon HD cards (HD5450 & HD7850) report the upper byte of the I/O port BAR
 * through VGA register 0x3c3.  On newer cards, the I/O port BAR is always
 * BAR4 (older cards like the X550 used BAR1, but we don't care to support
 * those).  Note that on bare metal, a read of 0x3c3 doesn't always return the
 * I/O port BAR address.  Originally this was coded to return the virtual BAR
 * address only if the physical register read returns the actual BAR address,
 * but users have reported greater success if we return the virtual address
 * unconditionally.
 */
static uint64_t vfio_ati_3c3_quirk_read(void *opaque,
                                        hwaddr addr, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    uint64_t data = vfio_pci_read_config(&vdev->pdev,
                                         PCI_BASE_ADDRESS_0 + (4 * 4) + 1,
                                         size);
    trace_vfio_ati_3c3_quirk_read(data);

    return data;
}

static const MemoryRegionOps vfio_ati_3c3_quirk = {
    .read = vfio_ati_3c3_quirk_read,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static void vfio_vga_probe_ati_3c3_quirk(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
        return;
    }

    /*
     * As long as the BAR is >= 256 bytes it will be aligned such that the
     * lower byte is always zero.  Filter out anything else, if it exists.
     */
    if (!vdev->bars[4].ioport || vdev->bars[4].region.size < 256) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;

    memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_ati_3c3_quirk, quirk,
                          "vfio-ati-3c3-quirk", 1);
    memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
                                3 /* offset 3 bytes from 0x3c0 */, &quirk->mem);

    QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
                      quirk, next);

    trace_vfio_vga_probe_ati_3c3_quirk(vdev->vbasedev.name);
}

/*
 * Newer ATI/AMD devices, including HD5450 and HD7850, have a window to PCI
 * config space through MMIO BAR2 at offset 0x4000.  Nothing seems to access
 * the MMIO space directly, but a window to this space is provided through
 * I/O port BAR4.  Offset 0x0 is the address register and offset 0x4 is the
 * data register.  When the address is programmed to a range of 0x4000-0x4fff
 * PCI configuration space is available.  Experimentation seems to indicate
 * that only read-only access is provided, but we drop writes when the window
 * is enabled to config space nonetheless.
 */
static void vfio_probe_ati_bar4_window_quirk(VFIOPCIDevice *vdev, int nr)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    if (!vdev->has_vga || nr != 4 ||
        pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.address_size = 4;
    quirk->data.data_offset = 4;
    quirk->data.data_size = 4;
    quirk->data.address_match = 0x4000;
    quirk->data.address_mask = PCIE_CONFIG_SPACE_SIZE - 1;
    quirk->data.bar = nr;
    quirk->data.read_flags = quirk->data.write_flags = 1;

    memory_region_init_io(&quirk->mem, OBJECT(vdev),
                          &vfio_generic_window_quirk, quirk,
                          "vfio-ati-bar4-window-quirk", 8);
    memory_region_add_subregion_overlap(&vdev->bars[nr].region.mem,
                          quirk->data.base_offset, &quirk->mem, 1);

    QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);

    trace_vfio_probe_ati_bar4_window_quirk(vdev->vbasedev.name);
}

#define PCI_VENDOR_ID_REALTEK 0x10ec

/*
 * RTL8168 devices have a backdoor that can access the MSI-X table.  At BAR2
 * offset 0x70 there is a dword data register, offset 0x74 is a dword address
 * register.  According to the Linux r8169 driver, the MSI-X table is addressed
 * when the "type" portion of the address register is set to 0x1.  This appears
 * to be bits 16:30.  Bit 31 is both a write indicator and some sort of
 * "address latched" indicator.  Bits 12:15 are a mask field, which we can
 * ignore because the MSI-X table should always be accessed as a dword (full
 * mask).  Bits 0:11 is offset within the type.
 *
 * Example trace:
 *
 * Read from MSI-X table offset 0
 * vfio: vfio_bar_write(0000:05:00.0:BAR2+0x74, 0x1f000, 4) // store read addr
 * vfio: vfio_bar_read(0000:05:00.0:BAR2+0x74, 4) = 0x8001f000 // latch
 * vfio: vfio_bar_read(0000:05:00.0:BAR2+0x70, 4) = 0xfee00398 // read data
 *
 * Write 0xfee00000 to MSI-X table offset 0
 * vfio: vfio_bar_write(0000:05:00.0:BAR2+0x70, 0xfee00000, 4) // write data
 * vfio: vfio_bar_write(0000:05:00.0:BAR2+0x74, 0x8001f000, 4) // do write
 * vfio: vfio_bar_read(0000:05:00.0:BAR2+0x74, 4) = 0x1f000 // complete
 */

static uint64_t vfio_rtl8168_window_quirk_read(void *opaque,
                                               hwaddr addr, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;

    switch (addr) {
    case 4: /* address */
        if (quirk->data.flags) {
            trace_vfio_rtl8168_window_quirk_read_fake(
                    memory_region_name(&quirk->mem),
                    vdev->vbasedev.name);

            return quirk->data.address_match ^ 0x80000000U;
        }
        break;
    case 0: /* data */
        if (quirk->data.flags) {
            uint64_t val;

            trace_vfio_rtl8168_window_quirk_read_table(
                    memory_region_name(&quirk->mem),
                    vdev->vbasedev.name);

            if (!(vdev->pdev.cap_present & QEMU_PCI_CAP_MSIX)) {
                return 0;
            }

            memory_region_dispatch_read(&vdev->pdev.msix_table_mmio,
                                        (hwaddr)(quirk->data.address_match
                                                 & 0xfff),
                                        &val,
                                        size,
                                        MEMTXATTRS_UNSPECIFIED);
            return val;
        }
    }

    trace_vfio_rtl8168_window_quirk_read_direct(memory_region_name(&quirk->mem),
                                                vdev->vbasedev.name);

    return vfio_region_read(&vdev->bars[quirk->data.bar].region,
                            addr + 0x70, size);
}

static void vfio_rtl8168_window_quirk_write(void *opaque, hwaddr addr,
                                            uint64_t data, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;

    switch (addr) {
    case 4: /* address */
        if ((data & 0x7fff0000) == 0x10000) {
            if (data & 0x80000000U &&
                vdev->pdev.cap_present & QEMU_PCI_CAP_MSIX) {

                trace_vfio_rtl8168_window_quirk_write_table(
                        memory_region_name(&quirk->mem),
                        vdev->vbasedev.name);

                memory_region_dispatch_write(&vdev->pdev.msix_table_mmio,
                                             (hwaddr)(data & 0xfff),
                                             (uint64_t)quirk->data.address_mask,
                                             size, MEMTXATTRS_UNSPECIFIED);
            }

            quirk->data.flags = 1;
            quirk->data.address_match = data;

            return;
        }
        quirk->data.flags = 0;
        break;
    case 0: /* data */
        quirk->data.address_mask = data;
        break;
    }

    trace_vfio_rtl8168_window_quirk_write_direct(
            memory_region_name(&quirk->mem),
            vdev->vbasedev.name);

    vfio_region_write(&vdev->bars[quirk->data.bar].region,
                      addr + 0x70, data, size);
}

static const MemoryRegionOps vfio_rtl8168_window_quirk = {
    .read = vfio_rtl8168_window_quirk_read,
    .write = vfio_rtl8168_window_quirk_write,
    .valid = {
        .min_access_size = 4,
        .max_access_size = 4,
        .unaligned = false,
    },
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static void vfio_probe_rtl8168_bar2_window_quirk(VFIOPCIDevice *vdev, int nr)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_REALTEK ||
        pci_get_word(pdev->config + PCI_DEVICE_ID) != 0x8168 || nr != 2) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.bar = nr;

    memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_rtl8168_window_quirk,
                          quirk, "vfio-rtl8168-window-quirk", 8);
    memory_region_add_subregion_overlap(&vdev->bars[nr].region.mem,
                                        0x70, &quirk->mem, 1);

    QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);

    trace_vfio_probe_rtl8168_bar2_window_quirk(vdev->vbasedev.name);
}
/*
 * Trap the BAR2 MMIO window to config space as well.
 */
static void vfio_probe_ati_bar2_4000_quirk(VFIOPCIDevice *vdev, int nr)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    /* Only enable on newer devices where BAR2 is 64bit */
    if (!vdev->has_vga || nr != 2 || !vdev->bars[2].mem64 ||
        pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.flags = quirk->data.read_flags = quirk->data.write_flags = 1;
    quirk->data.address_match = 0x4000;
    quirk->data.address_mask = PCIE_CONFIG_SPACE_SIZE - 1;
    quirk->data.bar = nr;

    memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_generic_quirk, quirk,
                          "vfio-ati-bar2-4000-quirk",
                          TARGET_PAGE_ALIGN(quirk->data.address_mask + 1));
    memory_region_add_subregion_overlap(&vdev->bars[nr].region.mem,
                          quirk->data.address_match & TARGET_PAGE_MASK,
                          &quirk->mem, 1);

    QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);

    trace_vfio_probe_ati_bar2_4000_quirk(vdev->vbasedev.name);
}

/*
 * Older ATI/AMD cards like the X550 have a similar window to that above.
 * I/O port BAR1 provides a window to a mirror of PCI config space located
 * in BAR2 at offset 0xf00.  We don't care to support such older cards, but
 * note it for future reference.
 */

#define PCI_VENDOR_ID_NVIDIA                    0x10de

/*
 * Nvidia has several different methods to get to config space, the
 * nouveu project has several of these documented here:
 * https://github.com/pathscale/envytools/tree/master/hwdocs
 *
 * The first quirk is actually not documented in envytools and is found
 * on 10de:01d1 (NVIDIA Corporation G72 [GeForce 7300 LE]).  This is an
 * NV46 chipset.  The backdoor uses the legacy VGA I/O ports to access
 * the mirror of PCI config space found at BAR0 offset 0x1800.  The access
 * sequence first writes 0x338 to I/O port 0x3d4.  The target offset is
 * then written to 0x3d0.  Finally 0x538 is written for a read and 0x738
 * is written for a write to 0x3d4.  The BAR0 offset is then accessible
 * through 0x3d0.  This quirk doesn't seem to be necessary on newer cards
 * that use the I/O port BAR5 window but it doesn't hurt to leave it.
 */
enum {
    NV_3D0_NONE = 0,
    NV_3D0_SELECT,
    NV_3D0_WINDOW,
    NV_3D0_READ,
    NV_3D0_WRITE,
};

static uint64_t vfio_nvidia_3d0_quirk_read(void *opaque,
                                           hwaddr addr, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    PCIDevice *pdev = &vdev->pdev;
    uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
                                  addr + quirk->data.base_offset, size);

    if (quirk->data.flags == NV_3D0_READ && addr == quirk->data.data_offset) {
        data = vfio_pci_read_config(pdev, quirk->data.address_val, size);
        trace_vfio_nvidia_3d0_quirk_read(size, data);
    }

    quirk->data.flags = NV_3D0_NONE;

    return data;
}

static void vfio_nvidia_3d0_quirk_write(void *opaque, hwaddr addr,
                                        uint64_t data, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    PCIDevice *pdev = &vdev->pdev;

    switch (quirk->data.flags) {
    case NV_3D0_NONE:
        if (addr == quirk->data.address_offset && data == 0x338) {
            quirk->data.flags = NV_3D0_SELECT;
        }
        break;
    case NV_3D0_SELECT:
        quirk->data.flags = NV_3D0_NONE;
        if (addr == quirk->data.data_offset &&
            (data & ~quirk->data.address_mask) == quirk->data.address_match) {
            quirk->data.flags = NV_3D0_WINDOW;
            quirk->data.address_val = data & quirk->data.address_mask;
        }
        break;
    case NV_3D0_WINDOW:
        quirk->data.flags = NV_3D0_NONE;
        if (addr == quirk->data.address_offset) {
            if (data == 0x538) {
                quirk->data.flags = NV_3D0_READ;
            } else if (data == 0x738) {
                quirk->data.flags = NV_3D0_WRITE;
            }
        }
        break;
    case NV_3D0_WRITE:
        quirk->data.flags = NV_3D0_NONE;
        if (addr == quirk->data.data_offset) {
            vfio_pci_write_config(pdev, quirk->data.address_val, data, size);
            trace_vfio_nvidia_3d0_quirk_write(data, size);
            return;
        }
        break;
    }

    vfio_vga_write(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
                   addr + quirk->data.base_offset, data, size);
}

static const MemoryRegionOps vfio_nvidia_3d0_quirk = {
    .read = vfio_nvidia_3d0_quirk_read,
    .write = vfio_nvidia_3d0_quirk_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static void vfio_vga_probe_nvidia_3d0_quirk(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA ||
        !vdev->bars[1].region.size) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.base_offset = 0x10;
    quirk->data.address_offset = 4;
    quirk->data.address_size = 2;
    quirk->data.address_match = 0x1800;
    quirk->data.address_mask = PCI_CONFIG_SPACE_SIZE - 1;
    quirk->data.data_offset = 0;
    quirk->data.data_size = 4;

    memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_3d0_quirk,
                          quirk, "vfio-nvidia-3d0-quirk", 6);
    memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
                                quirk->data.base_offset, &quirk->mem);

    QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
                      quirk, next);

    trace_vfio_vga_probe_nvidia_3d0_quirk(vdev->vbasedev.name);
}

/*
 * The second quirk is documented in envytools.  The I/O port BAR5 is just
 * a set of address/data ports to the MMIO BARs.  The BAR we care about is
 * again BAR0.  This backdoor is apparently a bit newer than the one above
 * so we need to not only trap 256 bytes @0x1800, but all of PCI config
 * space, including extended space is available at the 4k @0x88000.
 */
enum {
    NV_BAR5_ADDRESS = 0x1,
    NV_BAR5_ENABLE = 0x2,
    NV_BAR5_MASTER = 0x4,
    NV_BAR5_VALID = 0x7,
};

static void vfio_nvidia_bar5_window_quirk_write(void *opaque, hwaddr addr,
                                                uint64_t data, unsigned size)
{
    VFIOQuirk *quirk = opaque;

    switch (addr) {
    case 0x0:
        if (data & 0x1) {
            quirk->data.flags |= NV_BAR5_MASTER;
        } else {
            quirk->data.flags &= ~NV_BAR5_MASTER;
        }
        break;
    case 0x4:
        if (data & 0x1) {
            quirk->data.flags |= NV_BAR5_ENABLE;
        } else {
            quirk->data.flags &= ~NV_BAR5_ENABLE;
        }
        break;
    case 0x8:
        if (quirk->data.flags & NV_BAR5_MASTER) {
            if ((data & ~0xfff) == 0x88000) {
                quirk->data.flags |= NV_BAR5_ADDRESS;
                quirk->data.address_val = data & 0xfff;
            } else if ((data & ~0xff) == 0x1800) {
                quirk->data.flags |= NV_BAR5_ADDRESS;
                quirk->data.address_val = data & 0xff;
            } else {
                quirk->data.flags &= ~NV_BAR5_ADDRESS;
            }
        }
        break;
    }

    vfio_generic_window_quirk_write(opaque, addr, data, size);
}

static const MemoryRegionOps vfio_nvidia_bar5_window_quirk = {
    .read = vfio_generic_window_quirk_read,
    .write = vfio_nvidia_bar5_window_quirk_write,
    .valid.min_access_size = 4,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static void vfio_probe_nvidia_bar5_window_quirk(VFIOPCIDevice *vdev, int nr)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    if (!vdev->has_vga || nr != 5 ||
        pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.read_flags = quirk->data.write_flags = NV_BAR5_VALID;
    quirk->data.address_offset = 0x8;
    quirk->data.address_size = 0; /* actually 4, but avoids generic code */
    quirk->data.data_offset = 0xc;
    quirk->data.data_size = 4;
    quirk->data.bar = nr;

    memory_region_init_io(&quirk->mem, OBJECT(vdev),
                          &vfio_nvidia_bar5_window_quirk, quirk,
                          "vfio-nvidia-bar5-window-quirk", 16);
    memory_region_add_subregion_overlap(&vdev->bars[nr].region.mem,
                                        0, &quirk->mem, 1);

    QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);

    trace_vfio_probe_nvidia_bar5_window_quirk(vdev->vbasedev.name);
}

static void vfio_nvidia_88000_quirk_write(void *opaque, hwaddr addr,
                                          uint64_t data, unsigned size)
{
    VFIOQuirk *quirk = opaque;
    VFIOPCIDevice *vdev = quirk->vdev;
    PCIDevice *pdev = &vdev->pdev;
    hwaddr base = quirk->data.address_match & TARGET_PAGE_MASK;

    vfio_generic_quirk_write(opaque, addr, data, size);

    /*
     * Nvidia seems to acknowledge MSI interrupts by writing 0xff to the
     * MSI capability ID register.  Both the ID and next register are
     * read-only, so we allow writes covering either of those to real hw.
     * NB - only fixed for the 0x88000 MMIO window.
     */
    if ((pdev->cap_present & QEMU_PCI_CAP_MSI) &&
        vfio_range_contained(addr, size, pdev->msi_cap, PCI_MSI_FLAGS)) {
        vfio_region_write(&vdev->bars[quirk->data.bar].region,
                          addr + base, data, size);
    }
}

static const MemoryRegionOps vfio_nvidia_88000_quirk = {
    .read = vfio_generic_quirk_read,
    .write = vfio_nvidia_88000_quirk_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
};

/*
 * Finally, BAR0 itself.  We want to redirect any accesses to either
 * 0x1800 or 0x88000 through the PCI config space access functions.
 *
 * NB - quirk at a page granularity or else they don't seem to work when
 *      BARs are mmap'd
 *
 * Here's offset 0x88000...
 */
static void vfio_probe_nvidia_bar0_88000_quirk(VFIOPCIDevice *vdev, int nr)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;
    uint16_t vendor, class;

    vendor = pci_get_word(pdev->config + PCI_VENDOR_ID);
    class = pci_get_word(pdev->config + PCI_CLASS_DEVICE);

    if (nr != 0 || vendor != PCI_VENDOR_ID_NVIDIA ||
        class != PCI_CLASS_DISPLAY_VGA) {
        return;
    }

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.flags = quirk->data.read_flags = quirk->data.write_flags = 1;
    quirk->data.address_match = 0x88000;
    quirk->data.address_mask = PCIE_CONFIG_SPACE_SIZE - 1;
    quirk->data.bar = nr;

    memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_88000_quirk,
                          quirk, "vfio-nvidia-bar0-88000-quirk",
                          TARGET_PAGE_ALIGN(quirk->data.address_mask + 1));
    memory_region_add_subregion_overlap(&vdev->bars[nr].region.mem,
                          quirk->data.address_match & TARGET_PAGE_MASK,
                          &quirk->mem, 1);

    QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);

    trace_vfio_probe_nvidia_bar0_88000_quirk(vdev->vbasedev.name);
}

/*
 * And here's the same for BAR0 offset 0x1800...
 */
static void vfio_probe_nvidia_bar0_1800_quirk(VFIOPCIDevice *vdev, int nr)
{
    PCIDevice *pdev = &vdev->pdev;
    VFIOQuirk *quirk;

    if (!vdev->has_vga || nr != 0 ||
        pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
        return;
    }

    /* Log the chipset ID */
    trace_vfio_probe_nvidia_bar0_1800_quirk_id(
            (unsigned int)(vfio_region_read(&vdev->bars[0].region, 0, 4) >> 20)
            & 0xff);

    quirk = g_malloc0(sizeof(*quirk));
    quirk->vdev = vdev;
    quirk->data.flags = quirk->data.read_flags = quirk->data.write_flags = 1;
    quirk->data.address_match = 0x1800;
    quirk->data.address_mask = PCI_CONFIG_SPACE_SIZE - 1;
    quirk->data.bar = nr;

    memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_generic_quirk, quirk,
                          "vfio-nvidia-bar0-1800-quirk",
                          TARGET_PAGE_ALIGN(quirk->data.address_mask + 1));
    memory_region_add_subregion_overlap(&vdev->bars[nr].region.mem,
                          quirk->data.address_match & TARGET_PAGE_MASK,
                          &quirk->mem, 1);

    QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);

    trace_vfio_probe_nvidia_bar0_1800_quirk(vdev->vbasedev.name);
}

/*
 * TODO - Some Nvidia devices provide config access to their companion HDA
 * device and even to their parent bridge via these config space mirrors.
 * Add quirks for those regions.
 */

/*
 * Common quirk probe entry points.
 */
static void vfio_vga_quirk_setup(VFIOPCIDevice *vdev)
{
    vfio_vga_probe_ati_3c3_quirk(vdev);
    vfio_vga_probe_nvidia_3d0_quirk(vdev);
}

static void vfio_vga_quirk_teardown(VFIOPCIDevice *vdev)
{
    VFIOQuirk *quirk;
    int i;

    for (i = 0; i < ARRAY_SIZE(vdev->vga.region); i++) {
        QLIST_FOREACH(quirk, &vdev->vga.region[i].quirks, next) {
            memory_region_del_subregion(&vdev->vga.region[i].mem, &quirk->mem);
        }
    }
}

static void vfio_vga_quirk_free(VFIOPCIDevice *vdev)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(vdev->vga.region); i++) {
        while (!QLIST_EMPTY(&vdev->vga.region[i].quirks)) {
            VFIOQuirk *quirk = QLIST_FIRST(&vdev->vga.region[i].quirks);
            object_unparent(OBJECT(&quirk->mem));
            QLIST_REMOVE(quirk, next);
            g_free(quirk);
        }
    }
}

static void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr)
{
    vfio_probe_ati_bar4_window_quirk(vdev, nr);
    vfio_probe_ati_bar2_4000_quirk(vdev, nr);
    vfio_probe_nvidia_bar5_window_quirk(vdev, nr);
    vfio_probe_nvidia_bar0_88000_quirk(vdev, nr);
    vfio_probe_nvidia_bar0_1800_quirk(vdev, nr);
    vfio_probe_rtl8168_bar2_window_quirk(vdev, nr);
}

static void vfio_bar_quirk_teardown(VFIOPCIDevice *vdev, int nr)
{
    VFIOBAR *bar = &vdev->bars[nr];
    VFIOQuirk *quirk;

    QLIST_FOREACH(quirk, &bar->quirks, next) {
        memory_region_del_subregion(&bar->region.mem, &quirk->mem);
    }
}

static void vfio_bar_quirk_free(VFIOPCIDevice *vdev, int nr)
{
    VFIOBAR *bar = &vdev->bars[nr];

    while (!QLIST_EMPTY(&bar->quirks)) {
        VFIOQuirk *quirk = QLIST_FIRST(&bar->quirks);
        object_unparent(OBJECT(&quirk->mem));
        QLIST_REMOVE(quirk, next);
        g_free(quirk);
    }
}

/*
 * PCI config space
 */
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
    uint32_t emu_bits = 0, emu_val = 0, phys_val = 0, val;

    memcpy(&emu_bits, vdev->emulated_config_bits + addr, len);
    emu_bits = le32_to_cpu(emu_bits);

    if (emu_bits) {
        emu_val = pci_default_read_config(pdev, addr, len);
    }

    if (~emu_bits & (0xffffffffU >> (32 - len * 8))) {
        ssize_t ret;

        ret = pread(vdev->vbasedev.fd, &phys_val, len,
                    vdev->config_offset + addr);
        if (ret != len) {
            error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x) failed: %m",
                         __func__, vdev->host.domain, vdev->host.bus,
                         vdev->host.slot, vdev->host.function, addr, len);
            return -errno;
        }
        phys_val = le32_to_cpu(phys_val);
    }

    val = (emu_val & emu_bits) | (phys_val & ~emu_bits);

    trace_vfio_pci_read_config(vdev->vbasedev.name, addr, len, val);

    return val;
}

static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
                                  uint32_t val, int len)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
    uint32_t val_le = cpu_to_le32(val);

    trace_vfio_pci_write_config(vdev->vbasedev.name, addr, val, len);

    /* Write everything to VFIO, let it filter out what we can't write */
    if (pwrite(vdev->vbasedev.fd, &val_le, len, vdev->config_offset + addr)
                != len) {
        error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x, 0x%x) failed: %m",
                     __func__, vdev->host.domain, vdev->host.bus,
                     vdev->host.slot, vdev->host.function, addr, val, len);
    }

    /* MSI/MSI-X Enabling/Disabling */
    if (pdev->cap_present & QEMU_PCI_CAP_MSI &&
        ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size)) {
        int is_enabled, was_enabled = msi_enabled(pdev);

        pci_default_write_config(pdev, addr, val, len);

        is_enabled = msi_enabled(pdev);

        if (!was_enabled) {
            if (is_enabled) {
                vfio_enable_msi(vdev);
            }
        } else {
            if (!is_enabled) {
                vfio_disable_msi(vdev);
            } else {
                vfio_update_msi(vdev);
            }
        }
    } else if (pdev->cap_present & QEMU_PCI_CAP_MSIX &&
        ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) {
        int is_enabled, was_enabled = msix_enabled(pdev);

        pci_default_write_config(pdev, addr, val, len);

        is_enabled = msix_enabled(pdev);

        if (!was_enabled && is_enabled) {
            vfio_enable_msix(vdev);
        } else if (was_enabled && !is_enabled) {
            vfio_disable_msix(vdev);
        }
    } else {
        /* Write everything to QEMU to keep emulated bits correct */
        pci_default_write_config(pdev, addr, val, len);
    }
}

/*
 * Interrupt setup
 */
static void vfio_disable_interrupts(VFIOPCIDevice *vdev)
{
    /*
     * More complicated than it looks.  Disabling MSI/X transitions the
     * device to INTx mode (if supported).  Therefore we need to first
     * disable MSI/X and then cleanup by disabling INTx.
     */
    if (vdev->interrupt == VFIO_INT_MSIX) {
        vfio_disable_msix(vdev);
    } else if (vdev->interrupt == VFIO_INT_MSI) {
        vfio_disable_msi(vdev);
    }

    if (vdev->interrupt == VFIO_INT_INTx) {
        vfio_disable_intx(vdev);
    }
}

static int vfio_setup_msi(VFIOPCIDevice *vdev, int pos)
{
    uint16_t ctrl;
    bool msi_64bit, msi_maskbit;
    int ret, entries;

    if (pread(vdev->vbasedev.fd, &ctrl, sizeof(ctrl),
              vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) {
        return -errno;
    }
    ctrl = le16_to_cpu(ctrl);

    msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT);
    msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT);
    entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1);

    trace_vfio_setup_msi(vdev->vbasedev.name, pos);

    ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit);
    if (ret < 0) {
        if (ret == -ENOTSUP) {
            return 0;
        }
        error_report("vfio: msi_init failed");
        return ret;
    }
    vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0);

    return 0;
}

/*
 * We don't have any control over how pci_add_capability() inserts
 * capabilities into the chain.  In order to setup MSI-X we need a
 * MemoryRegion for the BAR.  In order to setup the BAR and not
 * attempt to mmap the MSI-X table area, which VFIO won't allow, we
 * need to first look for where the MSI-X table lives.  So we
 * unfortunately split MSI-X setup across two functions.
 */
static int vfio_early_setup_msix(VFIOPCIDevice *vdev)
{
    uint8_t pos;
    uint16_t ctrl;
    uint32_t table, pba;
    int fd = vdev->vbasedev.fd;

    pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX);
    if (!pos) {
        return 0;
    }

    if (pread(fd, &ctrl, sizeof(ctrl),
              vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) {
        return -errno;
    }

    if (pread(fd, &table, sizeof(table),
              vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) {
        return -errno;
    }

    if (pread(fd, &pba, sizeof(pba),
              vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) {
        return -errno;
    }

    ctrl = le16_to_cpu(ctrl);
    table = le32_to_cpu(table);
    pba = le32_to_cpu(pba);

    vdev->msix = g_malloc0(sizeof(*(vdev->msix)));
    vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK;
    vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK;
    vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK;
    vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK;
    vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1;

    /*
     * Test the size of the pba_offset variable and catch if it extends outside
     * of the specified BAR. If it is the case, we need to apply a hardware
     * specific quirk if the device is known or we have a broken configuration.
     */
    if (vdev->msix->pba_offset >=
        vdev->bars[vdev->msix->pba_bar].region.size) {

        PCIDevice *pdev = &vdev->pdev;
        uint16_t vendor = pci_get_word(pdev->config + PCI_VENDOR_ID);
        uint16_t device = pci_get_word(pdev->config + PCI_DEVICE_ID);

        /*
         * Chelsio T5 Virtual Function devices are encoded as 0x58xx for T5
         * adapters. The T5 hardware returns an incorrect value of 0x8000 for
         * the VF PBA offset while the BAR itself is only 8k. The correct value
         * is 0x1000, so we hard code that here.
         */
        if (vendor == PCI_VENDOR_ID_CHELSIO && (device & 0xff00) == 0x5800) {
            vdev->msix->pba_offset = 0x1000;
        } else {
            error_report("vfio: Hardware reports invalid configuration, "
                         "MSIX PBA outside of specified BAR");
            return -EINVAL;
        }
    }

    trace_vfio_early_setup_msix(vdev->vbasedev.name, pos,
                                vdev->msix->table_bar,
                                vdev->msix->table_offset,
                                vdev->msix->entries);

    return 0;
}

static int vfio_setup_msix(VFIOPCIDevice *vdev, int pos)
{
    int ret;

    ret = msix_init(&vdev->pdev, vdev->msix->entries,
                    &vdev->bars[vdev->msix->table_bar].region.mem,
                    vdev->msix->table_bar, vdev->msix->table_offset,
                    &vdev->bars[vdev->msix->pba_bar].region.mem,
                    vdev->msix->pba_bar, vdev->msix->pba_offset, pos);
    if (ret < 0) {
        if (ret == -ENOTSUP) {
            return 0;
        }
        error_report("vfio: msix_init failed");
        return ret;
    }

    return 0;
}

static void vfio_teardown_msi(VFIOPCIDevice *vdev)
{
    msi_uninit(&vdev->pdev);

    if (vdev->msix) {
        msix_uninit(&vdev->pdev,
                    &vdev->bars[vdev->msix->table_bar].region.mem,
                    &vdev->bars[vdev->msix->pba_bar].region.mem);
    }
}

/*
 * Resource setup
 */
static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled)
{
    int i;

    for (i = 0; i < PCI_ROM_SLOT; i++) {
        VFIOBAR *bar = &vdev->bars[i];

        if (!bar->region.size) {
            continue;
        }

        memory_region_set_enabled(&bar->region.mmap_mem, enabled);
        if (vdev->msix && vdev->msix->table_bar == i) {
            memory_region_set_enabled(&vdev->msix->mmap_mem, enabled);
        }
    }
}

static void vfio_unregister_bar(VFIOPCIDevice *vdev, int nr)
{
    VFIOBAR *bar = &vdev->bars[nr];

    if (!bar->region.size) {
        return;
    }

    vfio_bar_quirk_teardown(vdev, nr);

    memory_region_del_subregion(&bar->region.mem, &bar->region.mmap_mem);

    if (vdev->msix && vdev->msix->table_bar == nr) {
        memory_region_del_subregion(&bar->region.mem, &vdev->msix->mmap_mem);
    }
}

static void vfio_unmap_bar(VFIOPCIDevice *vdev, int nr)
{
    VFIOBAR *bar = &vdev->bars[nr];

    if (!bar->region.size) {
        return;
    }

    vfio_bar_quirk_free(vdev, nr);

    munmap(bar->region.mmap, memory_region_size(&bar->region.mmap_mem));

    if (vdev->msix && vdev->msix->table_bar == nr) {
        munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem));
    }
}

static void vfio_map_bar(VFIOPCIDevice *vdev, int nr)
{
    VFIOBAR *bar = &vdev->bars[nr];
    uint64_t size = bar->region.size;
    char name[64];
    uint32_t pci_bar;
    uint8_t type;
    int ret;

    /* Skip both unimplemented BARs and the upper half of 64bit BARS. */
    if (!size) {
        return;
    }

    snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d",
             vdev->host.domain, vdev->host.bus, vdev->host.slot,
             vdev->host.function, nr);

    /* Determine what type of BAR this is for registration */
    ret = pread(vdev->vbasedev.fd, &pci_bar, sizeof(pci_bar),
                vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr));
    if (ret != sizeof(pci_bar)) {
        error_report("vfio: Failed to read BAR %d (%m)", nr);
        return;
    }

    pci_bar = le32_to_cpu(pci_bar);
    bar->ioport = (pci_bar & PCI_BASE_ADDRESS_SPACE_IO);
    bar->mem64 = bar->ioport ? 0 : (pci_bar & PCI_BASE_ADDRESS_MEM_TYPE_64);
    type = pci_bar & (bar->ioport ? ~PCI_BASE_ADDRESS_IO_MASK :
                                    ~PCI_BASE_ADDRESS_MEM_MASK);

    /* A "slow" read/write mapping underlies all BARs */
    memory_region_init_io(&bar->region.mem, OBJECT(vdev), &vfio_region_ops,
                          bar, name, size);
    pci_register_bar(&vdev->pdev, nr, type, &bar->region.mem);

    /*
     * We can't mmap areas overlapping the MSIX vector table, so we
     * potentially insert a direct-mapped subregion before and after it.
     */
    if (vdev->msix && vdev->msix->table_bar == nr) {
        size = vdev->msix->table_offset & qemu_real_host_page_mask;
    }

    strncat(name, " mmap", sizeof(name) - strlen(name) - 1);
    if (vfio_mmap_region(OBJECT(vdev), &bar->region, &bar->region.mem,
                      &bar->region.mmap_mem, &bar->region.mmap,
                      size, 0, name)) {
        error_report("%s unsupported. Performance may be slow", name);
    }

    if (vdev->msix && vdev->msix->table_bar == nr) {
        uint64_t start;

        start = REAL_HOST_PAGE_ALIGN((uint64_t)vdev->msix->table_offset +
                                     (vdev->msix->entries *
                                      PCI_MSIX_ENTRY_SIZE));

        size = start < bar->region.size ? bar->region.size - start : 0;
        strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1);
        /* VFIOMSIXInfo contains another MemoryRegion for this mapping */
        if (vfio_mmap_region(OBJECT(vdev), &bar->region, &bar->region.mem,
                          &vdev->msix->mmap_mem,
                          &vdev->msix->mmap, size, start, name)) {
            error_report("%s unsupported. Performance may be slow", name);
        }
    }

    vfio_bar_quirk_setup(vdev, nr);
}

static void vfio_map_bars(VFIOPCIDevice *vdev)
{
    int i;

    for (i = 0; i < PCI_ROM_SLOT; i++) {
        vfio_map_bar(vdev, i);
    }

    if (vdev->has_vga) {
        memory_region_init_io(&vdev->vga.region[QEMU_PCI_VGA_MEM].mem,
                              OBJECT(vdev), &vfio_vga_ops,
                              &vdev->vga.region[QEMU_PCI_VGA_MEM],
                              "vfio-vga-mmio@0xa0000",
                              QEMU_PCI_VGA_MEM_SIZE);
        memory_region_init_io(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem,
                              OBJECT(vdev), &vfio_vga_ops,
                              &vdev->vga.region[QEMU_PCI_VGA_IO_LO],
                              "vfio-vga-io@0x3b0",
                              QEMU_PCI_VGA_IO_LO_SIZE);
        memory_region_init_io(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
                              OBJECT(vdev), &vfio_vga_ops,
                              &vdev->vga.region[QEMU_PCI_VGA_IO_HI],
                              "vfio-vga-io@0x3c0",
                              QEMU_PCI_VGA_IO_HI_SIZE);

        pci_register_vga(&vdev->pdev, &vdev->vga.region[QEMU_PCI_VGA_MEM].mem,
                         &vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem,
                         &vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem);
        vfio_vga_quirk_setup(vdev);
    }
}

static void vfio_unregister_bars(VFIOPCIDevice *vdev)
{
    int i;

    for (i = 0; i < PCI_ROM_SLOT; i++) {
        vfio_unregister_bar(vdev, i);
    }

    if (vdev->has_vga) {
        vfio_vga_quirk_teardown(vdev);
        pci_unregister_vga(&vdev->pdev);
    }
}

static void vfio_unmap_bars(VFIOPCIDevice *vdev)
{
    int i;

    for (i = 0; i < PCI_ROM_SLOT; i++) {
        vfio_unmap_bar(vdev, i);
    }

    if (vdev->has_vga) {
        vfio_vga_quirk_free(vdev);
    }
}

/*
 * General setup
 */
static uint8_t vfio_std_cap_max_size(PCIDevice *pdev, uint8_t pos)
{
    uint8_t tmp, next = 0xff;

    for (tmp = pdev->config[PCI_CAPABILITY_LIST]; tmp;
         tmp = pdev->config[tmp + 1]) {
        if (tmp > pos && tmp < next) {
            next = tmp;
        }
    }

    return next - pos;
}

static void vfio_set_word_bits(uint8_t *buf, uint16_t val, uint16_t mask)
{
    pci_set_word(buf, (pci_get_word(buf) & ~mask) | val);
}

static void vfio_add_emulated_word(VFIOPCIDevice *vdev, int pos,
                                   uint16_t val, uint16_t mask)
{
    vfio_set_word_bits(vdev->pdev.config + pos, val, mask);
    vfio_set_word_bits(vdev->pdev.wmask + pos, ~mask, mask);
    vfio_set_word_bits(vdev->emulated_config_bits + pos, mask, mask);
}

static void vfio_set_long_bits(uint8_t *buf, uint32_t val, uint32_t mask)
{
    pci_set_long(buf, (pci_get_long(buf) & ~mask) | val);
}

static void vfio_add_emulated_long(VFIOPCIDevice *vdev, int pos,
                                   uint32_t val, uint32_t mask)
{
    vfio_set_long_bits(vdev->pdev.config + pos, val, mask);
    vfio_set_long_bits(vdev->pdev.wmask + pos, ~mask, mask);
    vfio_set_long_bits(vdev->emulated_config_bits + pos, mask, mask);
}

static int vfio_setup_pcie_cap(VFIOPCIDevice *vdev, int pos, uint8_t size)
{
    uint16_t flags;
    uint8_t type;

    flags = pci_get_word(vdev->pdev.config + pos + PCI_CAP_FLAGS);
    type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;

    if (type != PCI_EXP_TYPE_ENDPOINT &&
        type != PCI_EXP_TYPE_LEG_END &&
        type != PCI_EXP_TYPE_RC_END) {

        error_report("vfio: Assignment of PCIe type 0x%x "
                     "devices is not currently supported", type);
        return -EINVAL;
    }

    if (!pci_bus_is_express(vdev->pdev.bus)) {
        /*
         * Use express capability as-is on PCI bus.  It doesn't make much
         * sense to even expose, but some drivers (ex. tg3) depend on it
         * and guests don't seem to be particular about it.  We'll need
         * to revist this or force express devices to express buses if we
         * ever expose an IOMMU to the guest.
         */
    } else if (pci_bus_is_root(vdev->pdev.bus)) {
        /*
         * On a Root Complex bus Endpoints become Root Complex Integrated
         * Endpoints, which changes the type and clears the LNK & LNK2 fields.
         */
        if (type == PCI_EXP_TYPE_ENDPOINT) {
            vfio_add_emulated_word(vdev, pos + PCI_CAP_FLAGS,
                                   PCI_EXP_TYPE_RC_END << 4,
                                   PCI_EXP_FLAGS_TYPE);

            /* Link Capabilities, Status, and Control goes away */
            if (size > PCI_EXP_LNKCTL) {
                vfio_add_emulated_long(vdev, pos + PCI_EXP_LNKCAP, 0, ~0);
                vfio_add_emulated_word(vdev, pos + PCI_EXP_LNKCTL, 0, ~0);
                vfio_add_emulated_word(vdev, pos + PCI_EXP_LNKSTA, 0, ~0);

#ifndef PCI_EXP_LNKCAP2
#define PCI_EXP_LNKCAP2 44
#endif
#ifndef PCI_EXP_LNKSTA2
#define PCI_EXP_LNKSTA2 50
#endif
                /* Link 2 Capabilities, Status, and Control goes away */
                if (size > PCI_EXP_LNKCAP2) {
                    vfio_add_emulated_long(vdev, pos + PCI_EXP_LNKCAP2, 0, ~0);
                    vfio_add_emulated_word(vdev, pos + PCI_EXP_LNKCTL2, 0, ~0);
                    vfio_add_emulated_word(vdev, pos + PCI_EXP_LNKSTA2, 0, ~0);
                }
            }

        } else if (type == PCI_EXP_TYPE_LEG_END) {
            /*
             * Legacy endpoints don't belong on the root complex.  Windows
             * seems to be happier with devices if we skip the capability.
             */
            return 0;
        }

    } else {
        /*
         * Convert Root Complex Integrated Endpoints to regular endpoints.
         * These devices don't support LNK/LNK2 capabilities, so make them up.
         */
        if (type == PCI_EXP_TYPE_RC_END) {
            vfio_add_emulated_word(vdev, pos + PCI_CAP_FLAGS,
                                   PCI_EXP_TYPE_ENDPOINT << 4,
                                   PCI_EXP_FLAGS_TYPE);
            vfio_add_emulated_long(vdev, pos + PCI_EXP_LNKCAP,
                                   PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25, ~0);
            vfio_add_emulated_word(vdev, pos + PCI_EXP_LNKCTL, 0, ~0);
        }

        /* Mark the Link Status bits as emulated to allow virtual negotiation */
        vfio_add_emulated_word(vdev, pos + PCI_EXP_LNKSTA,
                               pci_get_word(vdev->pdev.config + pos +
                                            PCI_EXP_LNKSTA),
                               PCI_EXP_LNKCAP_MLW | PCI_EXP_LNKCAP_SLS);
    }

    pos = pci_add_capability(&vdev->pdev, PCI_CAP_ID_EXP, pos, size);
    if (pos >= 0) {
        vdev->pdev.exp.exp_cap = pos;
    }

    return pos;
}

static void vfio_check_pcie_flr(VFIOPCIDevice *vdev, uint8_t pos)
{
    uint32_t cap = pci_get_long(vdev->pdev.config + pos + PCI_EXP_DEVCAP);

    if (cap & PCI_EXP_DEVCAP_FLR) {
        trace_vfio_check_pcie_flr(vdev->vbasedev.name);
        vdev->has_flr = true;
    }
}

static void vfio_check_pm_reset(VFIOPCIDevice *vdev, uint8_t pos)
{
    uint16_t csr = pci_get_word(vdev->pdev.config + pos + PCI_PM_CTRL);

    if (!(csr & PCI_PM_CTRL_NO_SOFT_RESET)) {
        trace_vfio_check_pm_reset(vdev->vbasedev.name);
        vdev->has_pm_reset = true;
    }
}

static void vfio_check_af_flr(VFIOPCIDevice *vdev, uint8_t pos)
{
    uint8_t cap = pci_get_byte(vdev->pdev.config + pos + PCI_AF_CAP);

    if ((cap & PCI_AF_CAP_TP) && (cap & PCI_AF_CAP_FLR)) {
        trace_vfio_check_af_flr(vdev->vbasedev.name);
        vdev->has_flr = true;
    }
}

static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos)
{
    PCIDevice *pdev = &vdev->pdev;
    uint8_t cap_id, next, size;
    int ret;

    cap_id = pdev->config[pos];
    next = pdev->config[pos + 1];

    /*
     * If it becomes important to configure capabilities to their actual
     * size, use this as the default when it's something we don't recognize.
     * Since QEMU doesn't actually handle many of the config accesses,
     * exact size doesn't seem worthwhile.
     */
    size = vfio_std_cap_max_size(pdev, pos);

    /*
     * pci_add_capability always inserts the new capability at the head
     * of the chain.  Therefore to end up with a chain that matches the
     * physical device, we insert from the end by making this recursive.
     * This is also why we pre-caclulate size above as cached config space
     * will be changed as we unwind the stack.
     */
    if (next) {
        ret = vfio_add_std_cap(vdev, next);
        if (ret) {
            return ret;
        }
    } else {
        /* Begin the rebuild, use QEMU emulated list bits */
        pdev->config[PCI_CAPABILITY_LIST] = 0;
        vdev->emulated_config_bits[PCI_CAPABILITY_LIST] = 0xff;
        vdev->emulated_config_bits[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
    }

    /* Use emulated next pointer to allow dropping caps */
    pci_set_byte(vdev->emulated_config_bits + pos + 1, 0xff);

    switch (cap_id) {
    case PCI_CAP_ID_MSI:
        ret = vfio_setup_msi(vdev, pos);
        break;
    case PCI_CAP_ID_EXP:
        vfio_check_pcie_flr(vdev, pos);
        ret = vfio_setup_pcie_cap(vdev, pos, size);
        break;
    case PCI_CAP_ID_MSIX:
        ret = vfio_setup_msix(vdev, pos);
        break;
    case PCI_CAP_ID_PM:
        vfio_check_pm_reset(vdev, pos);
        vdev->pm_cap = pos;
        ret = pci_add_capability(pdev, cap_id, pos, size);
        break;
    case PCI_CAP_ID_AF:
        vfio_check_af_flr(vdev, pos);
        ret = pci_add_capability(pdev, cap_id, pos, size);
        break;
    default:
        ret = pci_add_capability(pdev, cap_id, pos, size);
        break;
    }

    if (ret < 0) {
        error_report("vfio: %04x:%02x:%02x.%x Error adding PCI capability "
                     "0x%x[0x%x]@0x%x: %d", vdev->host.domain,
                     vdev->host.bus, vdev->host.slot, vdev->host.function,
                     cap_id, size, pos, ret);
        return ret;
    }

    return 0;
}

static int vfio_add_capabilities(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;

    if (!(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST) ||
        !pdev->config[PCI_CAPABILITY_LIST]) {
        return 0; /* Nothing to add */
    }

    return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]);
}

static void vfio_pci_pre_reset(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;
    uint16_t cmd;

    vfio_disable_interrupts(vdev);

    /* Make sure the device is in D0 */
    if (vdev->pm_cap) {
        uint16_t pmcsr;
        uint8_t state;

        pmcsr = vfio_pci_read_config(pdev, vdev->pm_cap + PCI_PM_CTRL, 2);
        state = pmcsr & PCI_PM_CTRL_STATE_MASK;
        if (state) {
            pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
            vfio_pci_write_config(pdev, vdev->pm_cap + PCI_PM_CTRL, pmcsr, 2);
            /* vfio handles the necessary delay here */
            pmcsr = vfio_pci_read_config(pdev, vdev->pm_cap + PCI_PM_CTRL, 2);
            state = pmcsr & PCI_PM_CTRL_STATE_MASK;
            if (state) {
                error_report("vfio: Unable to power on device, stuck in D%d",
                             state);
            }
        }
    }

    /*
     * Stop any ongoing DMA by disconecting I/O, MMIO, and bus master.
     * Also put INTx Disable in known state.
     */
    cmd = vfio_pci_read_config(pdev, PCI_COMMAND, 2);
    cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
             PCI_COMMAND_INTX_DISABLE);
    vfio_pci_write_config(pdev, PCI_COMMAND, cmd, 2);
}

static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
{
    vfio_enable_intx(vdev);
}

static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
                                PCIHostDeviceAddress *host2)
{
    return (host1->domain == host2->domain && host1->bus == host2->bus &&
            host1->slot == host2->slot && host1->function == host2->function);
}

static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool single)
{
    VFIOGroup *group;
    struct vfio_pci_hot_reset_info *info;
    struct vfio_pci_dependent_device *devices;
    struct vfio_pci_hot_reset *reset;
    int32_t *fds;
    int ret, i, count;
    bool multi = false;

    trace_vfio_pci_hot_reset(vdev->vbasedev.name, single ? "one" : "multi");

    vfio_pci_pre_reset(vdev);
    vdev->vbasedev.needs_reset = false;

    info = g_malloc0(sizeof(*info));
    info->argsz = sizeof(*info);

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_GET_PCI_HOT_RESET_INFO, info);
    if (ret && errno != ENOSPC) {
        ret = -errno;
        if (!vdev->has_pm_reset) {
            error_report("vfio: Cannot reset device %04x:%02x:%02x.%x, "
                         "no available reset mechanism.", vdev->host.domain,
                         vdev->host.bus, vdev->host.slot, vdev->host.function);
        }
        goto out_single;
    }

    count = info->count;
    info = g_realloc(info, sizeof(*info) + (count * sizeof(*devices)));
    info->argsz = sizeof(*info) + (count * sizeof(*devices));
    devices = &info->devices[0];

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_GET_PCI_HOT_RESET_INFO, info);
    if (ret) {
        ret = -errno;
        error_report("vfio: hot reset info failed: %m");
        goto out_single;
    }

    trace_vfio_pci_hot_reset_has_dep_devices(vdev->vbasedev.name);

    /* Verify that we have all the groups required */
    for (i = 0; i < info->count; i++) {
        PCIHostDeviceAddress host;
        VFIOPCIDevice *tmp;
        VFIODevice *vbasedev_iter;

        host.domain = devices[i].segment;
        host.bus = devices[i].bus;
        host.slot = PCI_SLOT(devices[i].devfn);
        host.function = PCI_FUNC(devices[i].devfn);

        trace_vfio_pci_hot_reset_dep_devices(host.domain,
                host.bus, host.slot, host.function, devices[i].group_id);

        if (vfio_pci_host_match(&host, &vdev->host)) {
            continue;
        }

        QLIST_FOREACH(group, &vfio_group_list, next) {
            if (group->groupid == devices[i].group_id) {
                break;
            }
        }

        if (!group) {
            if (!vdev->has_pm_reset) {
                error_report("vfio: Cannot reset device %s, "
                             "depends on group %d which is not owned.",
                             vdev->vbasedev.name, devices[i].group_id);
            }
            ret = -EPERM;
            goto out;
        }

        /* Prep dependent devices for reset and clear our marker. */
        QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
            if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
                continue;
            }
            tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
            if (vfio_pci_host_match(&host, &tmp->host)) {
                if (single) {
                    ret = -EINVAL;
                    goto out_single;
                }
                vfio_pci_pre_reset(tmp);
                tmp->vbasedev.needs_reset = false;
                multi = true;
                break;
            }
        }
    }

    if (!single && !multi) {
        ret = -EINVAL;
        goto out_single;
    }

    /* Determine how many group fds need to be passed */
    count = 0;
    QLIST_FOREACH(group, &vfio_group_list, next) {
        for (i = 0; i < info->count; i++) {
            if (group->groupid == devices[i].group_id) {
                count++;
                break;
            }
        }
    }

    reset = g_malloc0(sizeof(*reset) + (count * sizeof(*fds)));
    reset->argsz = sizeof(*reset) + (count * sizeof(*fds));
    fds = &reset->group_fds[0];

    /* Fill in group fds */
    QLIST_FOREACH(group, &vfio_group_list, next) {
        for (i = 0; i < info->count; i++) {
            if (group->groupid == devices[i].group_id) {
                fds[reset->count++] = group->fd;
                break;
            }
        }
    }

    /* Bus reset! */
    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_PCI_HOT_RESET, reset);
    g_free(reset);

    trace_vfio_pci_hot_reset_result(vdev->vbasedev.name,
                                    ret ? "%m" : "Success");

out:
    /* Re-enable INTx on affected devices */
    for (i = 0; i < info->count; i++) {
        PCIHostDeviceAddress host;
        VFIOPCIDevice *tmp;
        VFIODevice *vbasedev_iter;

        host.domain = devices[i].segment;
        host.bus = devices[i].bus;
        host.slot = PCI_SLOT(devices[i].devfn);
        host.function = PCI_FUNC(devices[i].devfn);

        if (vfio_pci_host_match(&host, &vdev->host)) {
            continue;
        }

        QLIST_FOREACH(group, &vfio_group_list, next) {
            if (group->groupid == devices[i].group_id) {
                break;
            }
        }

        if (!group) {
            break;
        }

        QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
            if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
                continue;
            }
            tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
            if (vfio_pci_host_match(&host, &tmp->host)) {
                vfio_pci_post_reset(tmp);
                break;
            }
        }
    }
out_single:
    vfio_pci_post_reset(vdev);
    g_free(info);

    return ret;
}

/*
 * We want to differentiate hot reset of mulitple in-use devices vs hot reset
 * of a single in-use device.  VFIO_DEVICE_RESET will already handle the case
 * of doing hot resets when there is only a single device per bus.  The in-use
 * here refers to how many VFIODevices are affected.  A hot reset that affects
 * multiple devices, but only a single in-use device, means that we can call
 * it from our bus ->reset() callback since the extent is effectively a single
 * device.  This allows us to make use of it in the hotplug path.  When there
 * are multiple in-use devices, we can only trigger the hot reset during a
 * system reset and thus from our reset handler.  We separate _one vs _multi
 * here so that we don't overlap and do a double reset on the system reset
 * path where both our reset handler and ->reset() callback are used.  Calling
 * _one() will only do a hot reset for the one in-use devices case, calling
 * _multi() will do nothing if a _one() would have been sufficient.
 */
static int vfio_pci_hot_reset_one(VFIOPCIDevice *vdev)
{
    return vfio_pci_hot_reset(vdev, true);
}

static int vfio_pci_hot_reset_multi(VFIODevice *vbasedev)
{
    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
    return vfio_pci_hot_reset(vdev, false);
}

static void vfio_pci_compute_needs_reset(VFIODevice *vbasedev)
{
    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
    if (!vbasedev->reset_works || (!vdev->has_flr && vdev->has_pm_reset)) {
        vbasedev->needs_reset = true;
    }
}

static VFIODeviceOps vfio_pci_ops = {
    .vfio_compute_needs_reset = vfio_pci_compute_needs_reset,
    .vfio_hot_reset_multi = vfio_pci_hot_reset_multi,
    .vfio_eoi = vfio_eoi,
};

static int vfio_populate_device(VFIOPCIDevice *vdev)
{
    VFIODevice *vbasedev = &vdev->vbasedev;
    struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) };
    struct vfio_irq_info irq_info = { .argsz = sizeof(irq_info) };
    int i, ret = -1;

    /* Sanity check device */
    if (!(vbasedev->flags & VFIO_DEVICE_FLAGS_PCI)) {
        error_report("vfio: Um, this isn't a PCI device");
        goto error;
    }

    if (vbasedev->num_regions < VFIO_PCI_CONFIG_REGION_INDEX + 1) {
        error_report("vfio: unexpected number of io regions %u",
                     vbasedev->num_regions);
        goto error;
    }

    if (vbasedev->num_irqs < VFIO_PCI_MSIX_IRQ_INDEX + 1) {
        error_report("vfio: unexpected number of irqs %u", vbasedev->num_irqs);
        goto error;
    }

    for (i = VFIO_PCI_BAR0_REGION_INDEX; i < VFIO_PCI_ROM_REGION_INDEX; i++) {
        reg_info.index = i;

        ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_REGION_INFO, &reg_info);
        if (ret) {
            error_report("vfio: Error getting region %d info: %m", i);
            goto error;
        }

        trace_vfio_populate_device_region(vbasedev->name, i,
                                          (unsigned long)reg_info.size,
                                          (unsigned long)reg_info.offset,
                                          (unsigned long)reg_info.flags);

        vdev->bars[i].region.vbasedev = vbasedev;
        vdev->bars[i].region.flags = reg_info.flags;
        vdev->bars[i].region.size = reg_info.size;
        vdev->bars[i].region.fd_offset = reg_info.offset;
        vdev->bars[i].region.nr = i;
        QLIST_INIT(&vdev->bars[i].quirks);
    }

    reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX;

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_GET_REGION_INFO, &reg_info);
    if (ret) {
        error_report("vfio: Error getting config info: %m");
        goto error;
    }

    trace_vfio_populate_device_config(vdev->vbasedev.name,
                                      (unsigned long)reg_info.size,
                                      (unsigned long)reg_info.offset,
                                      (unsigned long)reg_info.flags);

    vdev->config_size = reg_info.size;
    if (vdev->config_size == PCI_CONFIG_SPACE_SIZE) {
        vdev->pdev.cap_present &= ~QEMU_PCI_CAP_EXPRESS;
    }
    vdev->config_offset = reg_info.offset;

    if ((vdev->features & VFIO_FEATURE_ENABLE_VGA) &&
        vbasedev->num_regions > VFIO_PCI_VGA_REGION_INDEX) {
        struct vfio_region_info vga_info = {
            .argsz = sizeof(vga_info),
            .index = VFIO_PCI_VGA_REGION_INDEX,
         };

        ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_GET_REGION_INFO, &vga_info);
        if (ret) {
            error_report(
                "vfio: Device does not support requested feature x-vga");
            goto error;
        }

        if (!(vga_info.flags & VFIO_REGION_INFO_FLAG_READ) ||
            !(vga_info.flags & VFIO_REGION_INFO_FLAG_WRITE) ||
            vga_info.size < 0xbffff + 1) {
            error_report("vfio: Unexpected VGA info, flags 0x%lx, size 0x%lx",
                         (unsigned long)vga_info.flags,
                         (unsigned long)vga_info.size);
            goto error;
        }

        vdev->vga.fd_offset = vga_info.offset;
        vdev->vga.fd = vdev->vbasedev.fd;

        vdev->vga.region[QEMU_PCI_VGA_MEM].offset = QEMU_PCI_VGA_MEM_BASE;
        vdev->vga.region[QEMU_PCI_VGA_MEM].nr = QEMU_PCI_VGA_MEM;
        QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_MEM].quirks);

        vdev->vga.region[QEMU_PCI_VGA_IO_LO].offset = QEMU_PCI_VGA_IO_LO_BASE;
        vdev->vga.region[QEMU_PCI_VGA_IO_LO].nr = QEMU_PCI_VGA_IO_LO;
        QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].quirks);

        vdev->vga.region[QEMU_PCI_VGA_IO_HI].offset = QEMU_PCI_VGA_IO_HI_BASE;
        vdev->vga.region[QEMU_PCI_VGA_IO_HI].nr = QEMU_PCI_VGA_IO_HI;
        QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks);

        vdev->has_vga = true;
    }

    irq_info.index = VFIO_PCI_ERR_IRQ_INDEX;

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_GET_IRQ_INFO, &irq_info);
    if (ret) {
        /* This can fail for an old kernel or legacy PCI dev */
        trace_vfio_populate_device_get_irq_info_failure();
        ret = 0;
    } else if (irq_info.count == 1) {
        vdev->pci_aer = true;
    } else {
        error_report("vfio: %s "
                     "Could not enable error recovery for the device",
                     vbasedev->name);
    }

error:
    return ret;
}

static void vfio_put_device(VFIOPCIDevice *vdev)
{
    g_free(vdev->vbasedev.name);
    if (vdev->msix) {
        object_unparent(OBJECT(&vdev->msix->mmap_mem));
        g_free(vdev->msix);
        vdev->msix = NULL;
    }
    vfio_put_base_device(&vdev->vbasedev);
}

static void vfio_err_notifier_handler(void *opaque)
{
    VFIOPCIDevice *vdev = opaque;

    if (!event_notifier_test_and_clear(&vdev->err_notifier)) {
        return;
    }

    /*
     * TBD. Retrieve the error details and decide what action
     * needs to be taken. One of the actions could be to pass
     * the error to the guest and have the guest driver recover
     * from the error. This requires that PCIe capabilities be
     * exposed to the guest. For now, we just terminate the
     * guest to contain the error.
     */

    error_report("%s(%04x:%02x:%02x.%x) Unrecoverable error detected.  "
                 "Please collect any data possible and then kill the guest",
                 __func__, vdev->host.domain, vdev->host.bus,
                 vdev->host.slot, vdev->host.function);

    vm_stop(RUN_STATE_INTERNAL_ERROR);
}

/*
 * Registers error notifier for devices supporting error recovery.
 * If we encounter a failure in this function, we report an error
 * and continue after disabling error recovery support for the
 * device.
 */
static void vfio_register_err_notifier(VFIOPCIDevice *vdev)
{
    int ret;
    int argsz;
    struct vfio_irq_set *irq_set;
    int32_t *pfd;

    if (!vdev->pci_aer) {
        return;
    }

    if (event_notifier_init(&vdev->err_notifier, 0)) {
        error_report("vfio: Unable to init event notifier for error detection");
        vdev->pci_aer = false;
        return;
    }

    argsz = sizeof(*irq_set) + sizeof(*pfd);

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
                     VFIO_IRQ_SET_ACTION_TRIGGER;
    irq_set->index = VFIO_PCI_ERR_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = 1;
    pfd = (int32_t *)&irq_set->data;

    *pfd = event_notifier_get_fd(&vdev->err_notifier);
    qemu_set_fd_handler(*pfd, vfio_err_notifier_handler, NULL, vdev);

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
    if (ret) {
        error_report("vfio: Failed to set up error notification");
        qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
        event_notifier_cleanup(&vdev->err_notifier);
        vdev->pci_aer = false;
    }
    g_free(irq_set);
}

static void vfio_unregister_err_notifier(VFIOPCIDevice *vdev)
{
    int argsz;
    struct vfio_irq_set *irq_set;
    int32_t *pfd;
    int ret;

    if (!vdev->pci_aer) {
        return;
    }

    argsz = sizeof(*irq_set) + sizeof(*pfd);

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
                     VFIO_IRQ_SET_ACTION_TRIGGER;
    irq_set->index = VFIO_PCI_ERR_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = 1;
    pfd = (int32_t *)&irq_set->data;
    *pfd = -1;

    ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
    if (ret) {
        error_report("vfio: Failed to de-assign error fd: %m");
    }
    g_free(irq_set);
    qemu_set_fd_handler(event_notifier_get_fd(&vdev->err_notifier),
                        NULL, NULL, vdev);
    event_notifier_cleanup(&vdev->err_notifier);
}

static void vfio_req_notifier_handler(void *opaque)
{
    VFIOPCIDevice *vdev = opaque;

    if (!event_notifier_test_and_clear(&vdev->req_notifier)) {
        return;
    }

    qdev_unplug(&vdev->pdev.qdev, NULL);
}

static void vfio_register_req_notifier(VFIOPCIDevice *vdev)
{
    struct vfio_irq_info irq_info = { .argsz = sizeof(irq_info),
                                      .index = VFIO_PCI_REQ_IRQ_INDEX };
    int argsz;
    struct vfio_irq_set *irq_set;
    int32_t *pfd;

    if (!(vdev->features & VFIO_FEATURE_ENABLE_REQ)) {
        return;
    }

    if (ioctl(vdev->vbasedev.fd,
              VFIO_DEVICE_GET_IRQ_INFO, &irq_info) < 0 || irq_info.count < 1) {
        return;
    }

    if (event_notifier_init(&vdev->req_notifier, 0)) {
        error_report("vfio: Unable to init event notifier for device request");
        return;
    }

    argsz = sizeof(*irq_set) + sizeof(*pfd);

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
                     VFIO_IRQ_SET_ACTION_TRIGGER;
    irq_set->index = VFIO_PCI_REQ_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = 1;
    pfd = (int32_t *)&irq_set->data;

    *pfd = event_notifier_get_fd(&vdev->req_notifier);
    qemu_set_fd_handler(*pfd, vfio_req_notifier_handler, NULL, vdev);

    if (ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set)) {
        error_report("vfio: Failed to set up device request notification");
        qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
        event_notifier_cleanup(&vdev->req_notifier);
    } else {
        vdev->req_enabled = true;
    }

    g_free(irq_set);
}

static void vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
{
    int argsz;
    struct vfio_irq_set *irq_set;
    int32_t *pfd;

    if (!vdev->req_enabled) {
        return;
    }

    argsz = sizeof(*irq_set) + sizeof(*pfd);

    irq_set = g_malloc0(argsz);
    irq_set->argsz = argsz;
    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD |
                     VFIO_IRQ_SET_ACTION_TRIGGER;
    irq_set->index = VFIO_PCI_REQ_IRQ_INDEX;
    irq_set->start = 0;
    irq_set->count = 1;
    pfd = (int32_t *)&irq_set->data;
    *pfd = -1;

    if (ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set)) {
        error_report("vfio: Failed to de-assign device request fd: %m");
    }
    g_free(irq_set);
    qemu_set_fd_handler(event_notifier_get_fd(&vdev->req_notifier),
                        NULL, NULL, vdev);
    event_notifier_cleanup(&vdev->req_notifier);

    vdev->req_enabled = false;
}

/*
 * AMD Radeon PCI config reset, based on Linux:
 *   drivers/gpu/drm/radeon/ci_smc.c:ci_is_smc_running()
 *   drivers/gpu/drm/radeon/radeon_device.c:radeon_pci_config_reset
 *   drivers/gpu/drm/radeon/ci_smc.c:ci_reset_smc()
 *   drivers/gpu/drm/radeon/ci_smc.c:ci_stop_smc_clock()
 * IDs: include/drm/drm_pciids.h
 * Registers: http://cgit.freedesktop.org/~agd5f/linux/commit/?id=4e2aa447f6f0
 *
 * Bonaire and Hawaii GPUs do not respond to a bus reset.  This is a bug in the
 * hardware that should be fixed on future ASICs.  The symptom of this is that
 * once the accerlated driver loads, Windows guests will bsod on subsequent
 * attmpts to load the driver, such as after VM reset or shutdown/restart.  To
 * work around this, we do an AMD specific PCI config reset, followed by an SMC
 * reset.  The PCI config reset only works if SMC firmware is running, so we
 * have a dependency on the state of the device as to whether this reset will
 * be effective.  There are still cases where we won't be able to kick the
 * device into working, but this greatly improves the usability overall.  The
 * config reset magic is relatively common on AMD GPUs, but the setup and SMC
 * poking is largely ASIC specific.
 */
static bool vfio_radeon_smc_is_running(VFIOPCIDevice *vdev)
{
    uint32_t clk, pc_c;

    /*
     * Registers 200h and 204h are index and data registers for acessing
     * indirect configuration registers within the device.
     */
    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);
    clk = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000370, 4);
    pc_c = vfio_region_read(&vdev->bars[5].region, 0x204, 4);

    return (!(clk & 1) && (0x20100 <= pc_c));
}

/*
 * The scope of a config reset is controlled by a mode bit in the misc register
 * and a fuse, exposed as a bit in another register.  The fuse is the default
 * (0 = GFX, 1 = whole GPU), the misc bit is a toggle, with the forumula
 * scope = !(misc ^ fuse), where the resulting scope is defined the same as
 * the fuse.  A truth table therefore tells us that if misc == fuse, we need
 * to flip the value of the bit in the misc register.
 */
static void vfio_radeon_set_gfx_only_reset(VFIOPCIDevice *vdev)
{
    uint32_t misc, fuse;
    bool a, b;

    vfio_region_write(&vdev->bars[5].region, 0x200, 0xc00c0000, 4);
    fuse = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
    b = fuse & 64;

    vfio_region_write(&vdev->bars[5].region, 0x200, 0xc0000010, 4);
    misc = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
    a = misc & 2;

    if (a == b) {
        vfio_region_write(&vdev->bars[5].region, 0x204, misc ^ 2, 4);
        vfio_region_read(&vdev->bars[5].region, 0x204, 4); /* flush */
    }
}

static int vfio_radeon_reset(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;
    int i, ret = 0;
    uint32_t data;

    /* Defer to a kernel implemented reset */
    if (vdev->vbasedev.reset_works) {
        return -ENODEV;
    }

    /* Enable only memory BAR access */
    vfio_pci_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MEMORY, 2);

    /* Reset only works if SMC firmware is loaded and running */
    if (!vfio_radeon_smc_is_running(vdev)) {
        ret = -EINVAL;
        goto out;
    }

    /* Make sure only the GFX function is reset */
    vfio_radeon_set_gfx_only_reset(vdev);

    /* AMD PCI config reset */
    vfio_pci_write_config(pdev, 0x7c, 0x39d5e86b, 4);
    usleep(100);

    /* Read back the memory size to make sure we're out of reset */
    for (i = 0; i < 100000; i++) {
        if (vfio_region_read(&vdev->bars[5].region, 0x5428, 4) != 0xffffffff) {
            break;
        }
        usleep(1);
    }

    /* Reset SMC */
    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000000, 4);
    data = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
    data |= 1;
    vfio_region_write(&vdev->bars[5].region, 0x204, data, 4);

    /* Disable SMC clock */
    vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);
    data = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
    data |= 1;
    vfio_region_write(&vdev->bars[5].region, 0x204, data, 4);

out:
    /* Restore PCI command register */
    vfio_pci_write_config(pdev, PCI_COMMAND, 0, 2);

    return ret;
}

static void vfio_setup_resetfn(VFIOPCIDevice *vdev)
{
    PCIDevice *pdev = &vdev->pdev;
    uint16_t vendor, device;

    vendor = pci_get_word(pdev->config + PCI_VENDOR_ID);
    device = pci_get_word(pdev->config + PCI_DEVICE_ID);

    switch (vendor) {
    case 0x1002:
        switch (device) {
        /* Bonaire */
        case 0x6649: /* Bonaire [FirePro W5100] */
        case 0x6650:
        case 0x6651:
        case 0x6658: /* Bonaire XTX [Radeon R7 260X] */
        case 0x665c: /* Bonaire XT [Radeon HD 7790/8770 / R9 260 OEM] */
        case 0x665d: /* Bonaire [Radeon R7 200 Series] */
        /* Hawaii */
        case 0x67A0: /* Hawaii XT GL [FirePro W9100] */
        case 0x67A1: /* Hawaii PRO GL [FirePro W8100] */
        case 0x67A2:
        case 0x67A8:
        case 0x67A9:
        case 0x67AA:
        case 0x67B0: /* Hawaii XT [Radeon R9 290X] */
        case 0x67B1: /* Hawaii PRO [Radeon R9 290] */
        case 0x67B8:
        case 0x67B9:
        case 0x67BA:
        case 0x67BE:
            vdev->resetfn = vfio_radeon_reset;
            break;
        }
        break;
    }
}

static int vfio_initfn(PCIDevice *pdev)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
    VFIODevice *vbasedev_iter;
    VFIOGroup *group;
    char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name;
    ssize_t len;
    struct stat st;
    int groupid;
    int ret;

    /* Check that the host device exists */
    snprintf(path, sizeof(path),
             "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/",
             vdev->host.domain, vdev->host.bus, vdev->host.slot,
             vdev->host.function);
    if (stat(path, &st) < 0) {
        error_report("vfio: error: no such host device: %s", path);
        return -errno;
    }

    vdev->vbasedev.ops = &vfio_pci_ops;

    vdev->vbasedev.type = VFIO_DEVICE_TYPE_PCI;
    vdev->vbasedev.name = g_strdup_printf("%04x:%02x:%02x.%01x",
                                          vdev->host.domain, vdev->host.bus,
                                          vdev->host.slot, vdev->host.function);

    strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1);

    len = readlink(path, iommu_group_path, sizeof(path));
    if (len <= 0 || len >= sizeof(path)) {
        error_report("vfio: error no iommu_group for device");
        return len < 0 ? -errno : -ENAMETOOLONG;
    }

    iommu_group_path[len] = 0;
    group_name = basename(iommu_group_path);

    if (sscanf(group_name, "%d", &groupid) != 1) {
        error_report("vfio: error reading %s: %m", path);
        return -errno;
    }

    trace_vfio_initfn(vdev->vbasedev.name, groupid);

    group = vfio_get_group(groupid, pci_device_iommu_address_space(pdev));
    if (!group) {
        error_report("vfio: failed to get group %d", groupid);
        return -ENOENT;
    }

    snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x",
            vdev->host.domain, vdev->host.bus, vdev->host.slot,
            vdev->host.function);

    QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
        if (strcmp(vbasedev_iter->name, vdev->vbasedev.name) == 0) {
            error_report("vfio: error: device %s is already attached", path);
            vfio_put_group(group);
            return -EBUSY;
        }
    }

    ret = vfio_get_device(group, path, &vdev->vbasedev);
    if (ret) {
        error_report("vfio: failed to get device %s", path);
        vfio_put_group(group);
        return ret;
    }

    ret = vfio_populate_device(vdev);
    if (ret) {
        return ret;
    }

    /* Get a copy of config space */
    ret = pread(vdev->vbasedev.fd, vdev->pdev.config,
                MIN(pci_config_size(&vdev->pdev), vdev->config_size),
                vdev->config_offset);
    if (ret < (int)MIN(pci_config_size(&vdev->pdev), vdev->config_size)) {
        ret = ret < 0 ? -errno : -EFAULT;
        error_report("vfio: Failed to read device config space");
        return ret;
    }

    /* vfio emulates a lot for us, but some bits need extra love */
    vdev->emulated_config_bits = g_malloc0(vdev->config_size);

    /* QEMU can choose to expose the ROM or not */
    memset(vdev->emulated_config_bits + PCI_ROM_ADDRESS, 0xff, 4);

    /* QEMU can change multi-function devices to single function, or reverse */
    vdev->emulated_config_bits[PCI_HEADER_TYPE] =
                                              PCI_HEADER_TYPE_MULTI_FUNCTION;

    /* Restore or clear multifunction, this is always controlled by QEMU */
    if (vdev->pdev.cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
        vdev->pdev.config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
    } else {
        vdev->pdev.config[PCI_HEADER_TYPE] &= ~PCI_HEADER_TYPE_MULTI_FUNCTION;
    }

    /*
     * Clear host resource mapping info.  If we choose not to register a
     * BAR, such as might be the case with the option ROM, we can get
     * confusing, unwritable, residual addresses from the host here.
     */
    memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24);
    memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4);

    vfio_pci_size_rom(vdev);

    ret = vfio_early_setup_msix(vdev);
    if (ret) {
        return ret;
    }

    vfio_map_bars(vdev);

    ret = vfio_add_capabilities(vdev);
    if (ret) {
        goto out_teardown;
    }

    /* QEMU emulates all of MSI & MSIX */
    if (pdev->cap_present & QEMU_PCI_CAP_MSIX) {
        memset(vdev->emulated_config_bits + pdev->msix_cap, 0xff,
               MSIX_CAP_LENGTH);
    }

    if (pdev->cap_present & QEMU_PCI_CAP_MSI) {
        memset(vdev->emulated_config_bits + pdev->msi_cap, 0xff,
               vdev->msi_cap_size);
    }

    if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) {
        vdev->intx.mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
                                                  vfio_intx_mmap_enable, vdev);
        pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq);
        ret = vfio_enable_intx(vdev);
        if (ret) {
            goto out_teardown;
        }
    }

    vfio_register_err_notifier(vdev);
    vfio_register_req_notifier(vdev);
    vfio_setup_resetfn(vdev);

    return 0;

out_teardown:
    pci_device_set_intx_routing_notifier(&vdev->pdev, NULL);
    vfio_teardown_msi(vdev);
    vfio_unregister_bars(vdev);
    return ret;
}

static void vfio_instance_finalize(Object *obj)
{
    PCIDevice *pci_dev = PCI_DEVICE(obj);
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pci_dev);
    VFIOGroup *group = vdev->vbasedev.group;

    vfio_unmap_bars(vdev);
    g_free(vdev->emulated_config_bits);
    g_free(vdev->rom);
    vfio_put_device(vdev);
    vfio_put_group(group);
}

static void vfio_exitfn(PCIDevice *pdev)
{
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);

    vfio_unregister_req_notifier(vdev);
    vfio_unregister_err_notifier(vdev);
    pci_device_set_intx_routing_notifier(&vdev->pdev, NULL);
    vfio_disable_interrupts(vdev);
    if (vdev->intx.mmap_timer) {
        timer_free(vdev->intx.mmap_timer);
    }
    vfio_teardown_msi(vdev);
    vfio_unregister_bars(vdev);
}

static void vfio_pci_reset(DeviceState *dev)
{
    PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev);
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);

    trace_vfio_pci_reset(vdev->vbasedev.name);

    vfio_pci_pre_reset(vdev);

    if (vdev->resetfn && !vdev->resetfn(vdev)) {
        goto post_reset;
    }

    if (vdev->vbasedev.reset_works &&
        (vdev->has_flr || !vdev->has_pm_reset) &&
        !ioctl(vdev->vbasedev.fd, VFIO_DEVICE_RESET)) {
        trace_vfio_pci_reset_flr(vdev->vbasedev.name);
        goto post_reset;
    }

    /* See if we can do our own bus reset */
    if (!vfio_pci_hot_reset_one(vdev)) {
        goto post_reset;
    }

    /* If nothing else works and the device supports PM reset, use it */
    if (vdev->vbasedev.reset_works && vdev->has_pm_reset &&
        !ioctl(vdev->vbasedev.fd, VFIO_DEVICE_RESET)) {
        trace_vfio_pci_reset_pm(vdev->vbasedev.name);
        goto post_reset;
    }

post_reset:
    vfio_pci_post_reset(vdev);
}

static void vfio_instance_init(Object *obj)
{
    PCIDevice *pci_dev = PCI_DEVICE(obj);
    VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, PCI_DEVICE(obj));

    device_add_bootindex_property(obj, &vdev->bootindex,
                                  "bootindex", NULL,
                                  &pci_dev->qdev, NULL);
}

static Property vfio_pci_dev_properties[] = {
    DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIOPCIDevice, host),
    DEFINE_PROP_UINT32("x-intx-mmap-timeout-ms", VFIOPCIDevice,
                       intx.mmap_timeout, 1100),
    DEFINE_PROP_BIT("x-vga", VFIOPCIDevice, features,
                    VFIO_FEATURE_ENABLE_VGA_BIT, false),
    DEFINE_PROP_BIT("x-req", VFIOPCIDevice, features,
                    VFIO_FEATURE_ENABLE_REQ_BIT, true),
    DEFINE_PROP_BOOL("x-mmap", VFIOPCIDevice, vbasedev.allow_mmap, true),
    /*
     * TODO - support passed fds... is this necessary?
     * DEFINE_PROP_STRING("vfiofd", VFIOPCIDevice, vfiofd_name),
     * DEFINE_PROP_STRING("vfiogroupfd, VFIOPCIDevice, vfiogroupfd_name),
     */
    DEFINE_PROP_END_OF_LIST(),
};

static const VMStateDescription vfio_pci_vmstate = {
    .name = "vfio-pci",
    .unmigratable = 1,
};

static void vfio_pci_dev_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    PCIDeviceClass *pdc = PCI_DEVICE_CLASS(klass);

    dc->reset = vfio_pci_reset;
    dc->props = vfio_pci_dev_properties;
    dc->vmsd = &vfio_pci_vmstate;
    dc->desc = "VFIO-based PCI device assignment";
    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
    pdc->init = vfio_initfn;
    pdc->exit = vfio_exitfn;
    pdc->config_read = vfio_pci_read_config;
    pdc->config_write = vfio_pci_write_config;
    pdc->is_express = 1; /* We might be */
}

static const TypeInfo vfio_pci_dev_info = {
    .name = "vfio-pci",
    .parent = TYPE_PCI_DEVICE,
    .instance_size = sizeof(VFIOPCIDevice),
    .class_init = vfio_pci_dev_class_init,
    .instance_init = vfio_instance_init,
    .instance_finalize = vfio_instance_finalize,
};

static void register_vfio_pci_dev_type(void)
{
    type_register_static(&vfio_pci_dev_info);
}

type_init(register_vfio_pci_dev_type)